View
1
Download
0
Category
Preview:
Citation preview
We can solve it!
Acidizing
Altitude Chambers
Ammunition Tests
Automotive Paint Booths
Bio Pharmaceuticals
Ballast Systems
Ballast Tanks
Boring Machines
Boiler Control
Burst Tests
Bottling Machines
Brake Line Test
Catalytic Converters
Cooling Towers
Compressor Surge
Coiled Tubing
Die Cast Machines
Conveyor Systems
Compactors/Boilers
Dough Separation
Dairy Bubblers
Environmental Chambers
Emission Sampling
Exhaust Systems
Filter Tests
Extrusion
Foundries
Flight Simulators
Furnace Control
Fuel Test
Groundwater Monitoring
Gas Wells
HVAC Systems
Heat Exchangers
Heating/Air Conditioning
Leak Test
HTST Balance Tanks
Irrigation Systems
Methane Extraction
Hydraulic Cylinders
Lake Levels
Milk Processing
Injection Molding
Lift Stations
Pump Control
Meter Calibration
Locomotive Boilers
Purified Water
Missile Systems
Meat Processing
Reservoir Level
Nitrogen Blankets
Metrology
Semiconductor Polishing
Paper Winding
Mine Roof Hydraulics
Stamping Presses
Power Generation
Mobile Hydraulics
Steering Systems
Rig Safety
MWD
Sterilizers
Rocket Turbines
Pipe Lines
Tablet Presses
Sewage Systems
Polymer Reactors
Textile Mills
Silo Level
Recycling Equipment
Truck Assembly
Space Probes
Refrigeration Systems
Valve Control
Steel Rolling Mills
Reverse Osmosis
Water Filtration Systems
Subsea
Transmission Test
Well Cementing
Tire Testing
Wind Tunnels
Wet Wells
applications
Challenge our Engineering, Manufacturing and Sales Team with your pressure or level application.
For over 50 years Dynisco Instruments
and Viatran Corporation have been solving
pressure and level measurement problems
in the some of the toughest application
environments - highly corrosive media,
damaging cyclic pressures, severe shock and
vibration. Our transducers and transmit-
ters are an integral part of the industrial
world, providing superior performance and
dependable pressure data. Choosing the
right product for each application is critical.
We have designed pressure sensors for
thousands of industrial and process
applications. All are available with
special pressure fittings, various electrical
terminations and corrosion resistant alloys.
Our sensors are renown for their rugged,
hermetic, all stainless design featuring a
complete array of industry approvals and
quality certifications.
To insure the highest performing solution,
we feature bonded foil strain gage, silicon
piezoresistive, ceramic and variable capaci-
tance sensing technologies to best suit each
application. Pressure ranges from draft
range to 100,000 PSI, with millivolt, voltage,
analog and digital outputs address every
customer’s instrument requirements.
We demonstrate the unique ability to
modify a transmitter at a standard cost
to meet the customer’s special needs.
Sensor sizing, electrical and process
connections, media compatibility, accuracy
and temperature performance is often
tailored to each customer and has truly
established our company as a
“Measurement Solutions Leader” in
many markets: Test, Fluid Power, Process,
Medical, Sanitary, and Oil & Gas.
Dynisco LLC38 Forge ParkwayFranklin,MA 02038USA
Phone +1 508 541 9400Fax +1 508 541 6206Email infoinst@dynisco.comwww.dynisco.com
Dynisco Europe GmbHWannenäckerstr.2474078 HeilbronnGermany
Phone +49 7131 297-0Fax +49 7131 23260Email infoeurope@dynisco.com
COMPLETE PRE SSURE and LEVEL MEA SUREMENT
Viatran300 Industrial DriveGrand Island, NY 14072USA
Phone +1 716 773 1700Fax +1 716 773 2488Email solutions@viatran.comwww.viatran.com
ViatranDynisco-Viatran Instruments Sdn BhdLot 3615, Jalan SM 6/8, KawasanPirindustrianPerak,Malaysia
Phone +60 05 6884014Fax +60 05 6884020Email dynisco.dvi@myjaring.net
1/07
We can solve it!
Acidizing
Altitude Chambers
Ammunition Tests
Automotive Paint Booths
Bio Pharmaceuticals
Ballast Systems
Ballast Tanks
Boring Machines
Boiler Control
Burst Tests
Bottling Machines
Brake Line Test
Catalytic Converters
Cooling Towers
Compressor Surge
Coiled Tubing
Die Cast Machines
Conveyor Systems
Compactors/Boilers
Dough Separation
Dairy Bubblers
Environmental Chambers
Emission Sampling
Exhaust Systems
Filter Tests
Extrusion
Foundries
Flight Simulators
Furnace Control
Fuel Test
Groundwater Monitoring
Gas Wells
HVAC Systems
Heat Exchangers
Heating/Air Conditioning
Leak Test
HTST Balance Tanks
Irrigation Systems
Methane Extraction
Hydraulic Cylinders
Lake Levels
Milk Processing
Injection Molding
Lift Stations
Pump Control
Meter Calibration
Locomotive Boilers
Purified Water
Missile Systems
Meat Processing
Reservoir Level
Nitrogen Blankets
Metrology
Semiconductor Polishing
Paper Winding
Mine Roof Hydraulics
Stamping Presses
Power Generation
Mobile Hydraulics
Steering Systems
Rig Safety
MWD
Sterilizers
Rocket Turbines
Pipe Lines
Tablet Presses
Sewage Systems
Polymer Reactors
Textile Mills
Silo Level
Recycling Equipment
Truck Assembly
Space Probes
Refrigeration Systems
Valve Control
Steel Rolling Mills
Reverse Osmosis
Water Filtration Systems
Subsea
Transmission Test
Well Cementing
Tire Testing
Wind Tunnels
Wet Wells
applications
Challenge our Engineering, Manufacturing and Sales Team with your pressure or level application.
For over 50 years Viatran has been solving pressure and level measurement problems in
the some of the toughest application
environments - highly corrosive media,
damaging cyclic pressures, severe shock and
vibration. Our transducers and transmit-
ters are an integral part of the industrial
world, providing superior performance and
dependable pressure data. Choosing the
right product for each application is critical.
We have designed pressure sensors for
thousands of industrial and process
applications. All are available with
special pressure fittings, various electrical
terminations and corrosion resistant alloys.
Our sensors are renown for their rugged,
hermetic, all stainless design featuring a
complete array of industry approvals and
quality certifications.
To insure the highest performing solution,
we feature bonded foil strain gage, silicon
piezoresistive, ceramic and variable capaci-
tance sensing technologies to best suit each
application. Pressure ranges from draft
range to 100,000 PSI, with millivolt, voltage,
analog and digital outputs address every
customer’s instrument requirements.
We demonstrate the unique ability to
modify a transmitter at a standard cost
to meet the customer’s special needs.
Sensor sizing, electrical and process
connections, media compatibility, accuracy
and temperature performance is often
tailored to each customer and has truly
established our company as a
“Measurement Solutions Leader” in
many markets: Test, Fluid Power, Process,
Medical, Sanitary, and Oil & Gas.
Dynisco LLC38 Forge ParkwayFranklin,MA 02038USA
Phone +1 508 541 9400Fax +1 508 541 6206Email infoinst@dynisco.comwww.dynisco.com
Dynisco Europe GmbHWannenäckerstr.2474078 HeilbronnGermany
Phone +49 7131 297-0Fax +49 7131 23260Email infoeurope@dynisco.com
COMPLETE PRE SSURE and LEVEL MEA SUREMENT
Viatran300 Industrial DriveGrand Island, NY 14072USA
Phone +1 716 773 1700Fax +1 716 773 2488Email solutions@viatran.comwww.viatran.com
ViatranDynisco-Viatran Instruments Sdn BhdLot 3615, Jalan SM 6/8, KawasanPirindustrianPerak,Malaysia
Phone +60 05 6884014Fax +60 05 6884020Email dynisco.dvi@myjaring.net
1/07
We can solve it!
Acidizing
Altitude Chambers
Ammunition Tests
Automotive Paint Booths
Bio Pharmaceuticals
Ballast Systems
Ballast Tanks
Boring Machines
Boiler Control
Burst Tests
Bottling Machines
Brake Line Test
Catalytic Converters
Cooling Towers
Compressor Surge
Coiled Tubing
Die Cast Machines
Conveyor Systems
Compactors/Boilers
Dough Separation
Dairy Bubblers
Environmental Chambers
Emission Sampling
Exhaust Systems
Filter Tests
Extrusion
Foundries
Flight Simulators
Furnace Control
Fuel Test
Groundwater Monitoring
Gas Wells
HVAC Systems
Heat Exchangers
Heating/Air Conditioning
Leak Test
HTST Balance Tanks
Irrigation Systems
Methane Extraction
Hydraulic Cylinders
Lake Levels
Milk Processing
Injection Molding
Lift Stations
Pump Control
Meter Calibration
Locomotive Boilers
Purified Water
Missile Systems
Meat Processing
Reservoir Level
Nitrogen Blankets
Metrology
Semiconductor Polishing
Paper Winding
Mine Roof Hydraulics
Stamping Presses
Power Generation
Mobile Hydraulics
Steering Systems
Rig Safety
MWD
Sterilizers
Rocket Turbines
Pipe Lines
Tablet Presses
Sewage Systems
Polymer Reactors
Textile Mills
Silo Level
Recycling Equipment
Truck Assembly
Space Probes
Refrigeration Systems
Valve Control
Steel Rolling Mills
Reverse Osmosis
Water Filtration Systems
Subsea
Transmission Test
Well Cementing
Tire Testing
Wind Tunnels
Wet Wells
applications
Challenge our Engineering, Manufacturing and Sales Team with your pressure or level application.
For over 50 years Dynisco Instruments
and Viatran Corporation have been solving
pressure and level measurement problems
in the some of the toughest application
environments - highly corrosive media,
damaging cyclic pressures, severe shock and
vibration. Our transducers and transmit-
ters are an integral part of the industrial
world, providing superior performance and
dependable pressure data. Choosing the
right product for each application is critical.
We have designed pressure sensors for
thousands of industrial and process
applications. All are available with
special pressure fittings, various electrical
terminations and corrosion resistant alloys.
Our sensors are renown for their rugged,
hermetic, all stainless design featuring a
complete array of industry approvals and
quality certifications.
To insure the highest performing solution,
we feature bonded foil strain gage, silicon
piezoresistive, ceramic and variable capaci-
tance sensing technologies to best suit each
application. Pressure ranges from draft
range to 100,000 PSI, with millivolt, voltage,
analog and digital outputs address every
customer’s instrument requirements.
We demonstrate the unique ability to
modify a transmitter at a standard cost
to meet the customer’s special needs.
Sensor sizing, electrical and process
connections, media compatibility, accuracy
and temperature performance is often
tailored to each customer and has truly
established our company as a
“Measurement Solutions Leader” in
many markets: Test, Fluid Power, Process,
Medical, Sanitary, and Oil & Gas.
Dynisco LLC38 Forge ParkwayFranklin,MA 02038USA
Phone +1 508 541 9400Fax +1 508 541 6206Email infoinst@dynisco.comwww.dynisco.com
Dynisco Europe GmbHWannenäckerstr.2474078 HeilbronnGermany
Phone +49 7131 297-0Fax +49 7131 23260Email infoeurope@dynisco.com
COMPLETE PRE SSURE and LEVEL MEA SUREMENT
Viatran300 Industrial DriveGrand Island, NY 14072USA
Phone +1 716 773 1700Fax +1 716 773 2488Email solutions@viatran.comwww.viatran.com
ViatranDynisco-Viatran Instruments Sdn BhdLot 3615, Jalan SM 6/8, KawasanPirindustrianPerak,Malaysia
Phone +60 05 6884014Fax +60 05 6884020Email dynisco.dvi@myjaring.net
1/07
Oil well fracturing and cementing
Acid treatmentGravel packagingWell head
No mounting stressShock and vibration
resistantNACE compliantNon-clogging port
0-5,000 thru 0-20,000 psis
0-350 thru0-1,400 bars
4-20 mA
9-28 Vdc
≤ ± 0.25%
WECO 1502 UnionWECO 2002 Union optional
Inconel X750,Inconel 718
5 lbs 8 oz (2.5 kg)
Drill toolsOil rigsOil platformsDownhole unit
Subminiature design
Temperature compensated
LightweightInconel wetted
parts
0-5,000 thru 0-25,000 psis
0-350 thru0-1,750 bars
1.97 mV/V
5 Vdc
≤ ± 0.25%
7/16-20UNF-2ANPT Male
Inconel 718
1.8 oz (51 g)
Rig safety systemsWell headOil pumpingNatural gas
pipelinesHazardous
locations
Hermetically sealedenclosure
316L SS housingLess than 5” height1.5” diameter< 1.3 mA current
consumption available
NACE complaint materials available
0-100 thru0-100,000 psis/a
0-7 thru0-7,000 bars/a
4-20 mA0-5 (0-10) Vdc2 mV/V
11.5-30 Vdc9-30 Vdc10-15 Vdc
≤ ± 0.15% ≤ ± 0.25% (≥ 20K psi)≤ ± 0.30% (100 psi)
1/4” NPT Female≤ 15K psiHigh pressure tube≥ 20K psi
15 –5 PH SS≤15K psiPH 13-8 Mo SS>20K psi
24 oz (680 g)
Polymer productionOil rigsShipboard/MarineWastewaterHazardous
locations
HART features:- 5:1 rangeability- remote config.- multi-drop network316 SS housing1.5” diameterSubmersibleNACE compliant
materials available
0-100 thru0-100,000 psis/a
0-7 thru0-7,000 bars/a
4-20 mA HARTDigital signal
11.5-30 Vdc
≤ ± 0.10% (≤ 20K psi)≤ ± 0.25% (> 20K psi)
1/4” NPT Female ≤ 15K psi High pressure tube≥ 20K psi
15 –5 PH SS≤15K psiPH 13-8 Mo SS >20K psi
24 oz (680 g)
Rig safety systems
Chemical processing
Shipboard/MarineGas compressorsHazardous
locations
Magnetically coupled external controls
5:1 rangingHermetically sealed316 SS housing1.5” diameter< 7” heightNACE compliant
materials available
0-100 thru0-100,000 psis/a
0-7 thru0-7,000 bars/a
4-20 mA
11.5-30 Vdc
≤ ± 0.15% ≤ ± 0.25% (≥ 20K psi)≤ ± 0.30% (100 psi)
1/4” NPT Female≤ 15K psi High pressure tube≥ 20K psi
15 –5 PH SS≤15K psiPH 13-8 Mo SS>20K psi
24 oz (680 g)
Sour gas wellsSecondary oil
recoveryOil pumpingHazardous
locations
40K psi secondarycontainment vessel
Hermetically sealedNACE/API 6A
compliantInconel 718 Magnetically
coupled external controls
0-100 thru 0-20,000 psis/a
0-7 thru0-1,400 bars/a
4-20 mA
11.5-30 Vdc
≤ ± 0.25% (150-20K psi)≤ ± 0.50% (100 psi)
1/4” NPT Female≤ 10K psi Autoclave(AE) F250-C ≥ 15K psi
Hastelloy C-276Inconel 718
4 lbs. 6 oz (1.9 kg)
Fuel tank levelChemical tank levelGas compressorsChemical
processingHazardous
locations
All welded construction
Optional externalzero and span adjusts
316L SS wetted parts
Ranges down to 20” WC
Hazardous locations
0-3 thru 0-5000 psig/s0-15 thru 0-500 psia0-15 psiv
0-0.2 thru 0-350 barg/s0-1 thru 0-35 bara0-1 barv
4-20 mA0-5 (0-10) Vdc5-10 mV/V
11.5-30 Vdc9-30 Vdc10-15 Vdc
≤ ± 0.15%(> 200psi)≤ ± 0.25% (≤ 200psi)
1/4” NPT Female
316L SS
10 oz (284 g)
Fuel tank levelChemical tank levelGas compressorsChemical
processingHazardous
locations
HART features:- 10:1 rangeability- remote config.- multi-drop networkAll 316L SS
construction 1.5” diameterSubmersible
0-3 thru 0-5000 psig/s0-15 thru 0-500 psia0-15 psiv
0-0.2 thru 0-350barg/s0-1 thru 0 35 bara0-1 barv
4-20 mA HARTDigital signal
11.5-30 Vdc
≤ ± 0.10%
1/4” NPT Female
316L SS
24 oz (680 g)
GOST. NEPSI
Chemical processing
Oil and gasPolymer plantsHazardous
locations
HART features:- 10:1 rangeability- remote config.- multi-drop networkNAMUROutput sent directly
to DCS or PLCImproved frequency
response
0-5 thru0-72,500 psis/g/a
0-0.35 thru 0-5000 barg/s/a
4-20 mA HARTDigital signal
16-30 Vdc
2281: ≤ ± 0.25%2280: ≤ ± 0.5%
Application specific
15-5 PH SS17-4 PH SS
24 oz (680 g)
Chemical processing
Oil and gasPolymer plantsHazardous locations
Foundation FieldBusEasy hand-held
configurationOutput sent directly
to DCS or PLCImproved frequency
response
0-5 thru0-72,500 psis/g/a
0-0.35 thru 0-5000 barg/s/a
FOUNDATION FieldBus H1
9-24 Vdc
2281: ≤ ± 0.25%2280: ≤ ± 0.5%
Application specific
15-5 PH SS17-4 PH SS
24 oz (680 g)
SlurriesChemical
processingPulp and paperPolymer plants
Flush diaphragmZero volume
pressure portEasy set-upInternal calibration
shunt
0-15 thru 0-10,000 psig
0-1 thru0-700 barg
3 mV/V
10 Vdc
≤ ± 0.5%
3/4”-16 UNF-3A
17-4 PH SS
5 oz (142 g)
General purposeTest standsDynosHigh volume usage
CANopen availableEasy set-up via
directional BUS communications
SST constructionFlush sensor modelHigh accuracy
0-300 thru 0-15,000 psig
0-20 thru0-1,000 barg
3 mV/V0-5 (1-6) Vdc0-10 (1-11) Vdc4-20 mACANopen
10 Vdc10-32 Vdc15-32 Vdc10-36 Vdc18-32 Vdc
≤ ± 0.25%
Int. ISO 2281/1-G1/4Ext. DIN 3852-AG1/4AFlush M18x1.5
15-5 PH SS
5 oz (142 g)
General industrialHydraulicsPneumaticsCompressorsOff-road vehicleWater treatment
Low costSmall sizeEnvironmentally
sealedHigh cycle life
(1,000,000 cycles)Shock resistantStainless steel
construction
0-100 thru0-15,000 psig
0-7 thru0-1,400 barg
0-5 (0-10) Vdc 4-20 mA
10-30 Vdc
≤ ± 0.65%
1/4” NPT Female
15-5 PH SS
10 oz (284 g)
Hostile environments
Test standsDynosControl systemsDie casting
Stainless steel construction
Spike resistant High accuracyHigh cycle lifePrecise pressure
measurementDeviceNET
availableAll pressure ranges
0-15 thru0-10,000 psig
0-1 thru0-700 barg
3 mV/V0-5 (1-6) Vdc0-10 (1-11) Vdc4-20 mADeviceNet
10 Vdc10-36 Vdc14-36 Vdc12-36 Vdc11-25 Vdc
≤ ± 0.25%
1/4” NPT Male
15-5 PH SS
8 oz (227 g)
Test standsMetrologyLaboratory/ResearchAutomotive test
systemsSemiconductorsCaliper testingDynos
≤ ± 0.05% linearityDigitally
compensatedSmall sizeFast responseRFI/EMI protectedExternal adjustments Stainless steel
constructionMultiple connector,
port, perf. options
0-2 thru 0-100,000 psig/a0-15 psiv
0-0.14 thru 0-7,000 barg/s/a0-1 barv
0-5 (0-10) Vdc4-20 mA
9-30 (13-30) Vdc9-30 Vdc
≤ ± 0.05% (≤ 5Kpsi)≤ ± 0.15% (> 5Kpsi)
1/4” NPT Female
316L SST ≤ 5K psi15-5 ≥ 5K-15K psiPH 13-8 Mo SS ≥ 20K psi
15 oz (425 g)
APPROVALS
APPLICATIONS
FEATURESBENEFITS
STANDARD PSIRANGESAvailable in: MPa,kgf/cm2, et al
STANDARD BARRANGES
FULL SCALE OUTPUT(FSO)
NOMINAL INPUTVOLTAGES
ACCURACY[COMBINEDERROR]
STANDARDPRESSURECONNECTION
STANDARD WETTEDPARTS
WEIGHT
oil, gas and petrochemical industrial test and control
509 pt 332 570 | 770 | 870 970 571 572 548 | 748 | 848 948 spx ffx pt 311 ida series 243 | 343 270 245 | 345model
Challenge Our Engineering, Manufacturing and Sales Team with your pressure or level application. We can solve it!
(available)
Test standsJet EngineBrake HydraulicPumps/Compressors
Top mounted, sealed externaladjustments
Stainless steel construction
High accuracyInternal calibration
circuit≤ ± 0.05% linearity
available
0-2 thru 0-100K psig/a0-15 psiv
0-0.14 thru0-7,000 barg/s/a0-1 barv
0-5 (0-10) Vdc4-20 mA
9-40 (12-28) Vdc9-40 Vdc
≤ ± 0.10% (≤ 5K psi)≤ ± 0.15% (> 5K psi)
1/4” NPT Female0-15K psiHigh pressure Tube20K-100K psi
304, 316L SS < 5K psi15-5 PH SS 5K -15K psiPH 13-8 Mo SS ≥ 20K psi
15 oz (425 g)
Hydraulic and pneumatic systems
Injection moldingOre trucksCranes
Long life, low costSpike and corrosion
resistantQuick calibrationWithstands severe
environmentsTemp compensatedSurface mount
technology
0-15 thru0-10,000 psig
0-1 thru0-700 barg
3 mV/V0-5 (1-6) Vdc0-10 (1-11) Vdc4-20 mA
10 Vdc11-32 Vdc16-32 Vdc14-36 Vdc
≤ ± 0.50%
1/8” NPT Female
15-5 PH SS
5 oz (142 g)
Test standsDynamometersRoad test systemsBrake test stands
< 2.5” H, 1”DTemps to 285°FPressure/vacuum
serviceAll welded SSTWestern regional
wiring code option
0-15 thru 0-10,000 psig
0-1 thru0-700 barg
3 mV/V
10 Vdc
≤ ± 0.50%
1/8” NPT Female
15-5 PH SS
5 oz (142 g)
Die castingStamping pressesRolling millsHydraulic systemsTest stands
3X overpressureStainless steel
construction< 1 millisecond
response timeMultiple connector,
port, performance options available
0-3 thru 0-15,000 psig 0-200 psia0-15 psiv
0-0.2 thru0-1,000 barg0-14 bara0-1 barv
2.5-10 mV/V0-5 (0-10) Vdc4-20 mA
10-15 Vdc9-30 (12-30) Vdc9-30 Vdc
≤ ± 0.15% (> 200 psi)≤ ± 0.25% (≤ 200 psi)
1/4” NPT Female
304,316 L SST15-5 PH SS
10 oz (284 g)
Automotive test stands
AerospaceMilitaryGeneral industrialHydraulic systems
All welded SST≤ ± 0.5%/100°F
temperature performance
Internal calibration circuit
Easy set-upField proven
technologyExternal zero and
span adjustments
0-5 thru 0-30,000 psig/s/a0-15 psiv
0-0.35 thru0-2,000 barg/s/a0-1 barv
3 mV/V0-5 Vdc0-10 Vdc
10 Vdc24-32 Vdc24-32 Vdc
8X2: ≤ ± 0.15%8X1: ≤ ± 0.25%8X0: ≤ ± 0.50%
1/4” NPT Female
17-4 PH SS15-5 PH SS
13-17 oz (369-482 g)
Leak testEngine test standsAutoclavesWind tunnels
Fast response1,000 psid
overpressure 3,000 psid optional
Low range wet/wet DP
mV/V output availableHastelloy wetted
parts available
0-0.5” WCD thru0-3.000 psidLine Pressure: 1,000 psi
0-5” WCD thru0-7 bardLine Pressure: 70 bar
0-5 (0-10) Vdc4-20 mA
10-42 (15-45) Vdc10-42 Vdc
≤ ± 0.20%
1/4” NPT Female
316 L SSViton® O-ring
56 oz (1.6 kg)
WastewaterNatural gas
processingFood processingShipboard/Marine
HART DP30:1 rangingPush button
configuration and calibration
Local digital indication
Exotic wetted materials available
0-5” WCD thru0-300 psid
0-5” WCD thru0-20 bard
1-5 Vdc4-20 mA4-20 mA HART Digital Signal
9-15.5 Vdc11.5-42 Vdc17-42 Vdc
≤ ± 0.20% maximum
Application specific (Remote seals shown)
316L SS
12 lbs (5.4 kg)
Reservoirs/DamsGround water wellsEPA plant studiesChemical
processingShipboard/Marine
0.87” diameter316L SS constructionO-ring free designAll welded
transmitterIntegral atmospheric
reference tube
0-2 thru 0-500 psig(40” thru 1155”WC)
0-0.14 thru0-35 barg
4-20 mA
9-30 Vdc
≤ ± 0.10%(≤ ± 0.25% max)
5/8” - 18 UNF Female
316L SSTefzel or Polyurethane
10 oz (284 g)
Dairy/Food/BeveragePharmaceutical/
BiotechnologyBalance tanksSilo tanks
Less than 1 minute CIP/SIP recovery
Flush Hastelloy diaphragm
316L SS, NEMA 4X housing
3:1 rangingZero and Span
adjustOptional display
0-30” thru 0-750” WCG
0-30” WCG thru0-2 barg
4-20 mA4-20 mA HART Digital Signal
9-30 Vdc (14-30 with display)11.5-30 Vdc
360: ≤ ± 0.10%960: ≤ ± 0.15%
21 adapter types available
Hastelloy C-276
4 lbs. (1.8kg)
Sanitary tank levelBeverage
processingFood/Dairy
processingPharmaceutical
processing
Flush Hastelloy diaphragm
Unique Gortex breathing system
Less than 1 minute thermal recovery time
All welded SS construction
Zero and spanadjusts
0-30” WCG thru 0-500 psig0-15 thru 0-500 psia0-15 psiv
0-30” WCG thru0-35 barg0-1 thru 0 - 35 bara0-1 barv
4-20 mA
9-30 Vdc
≤ ± 0.25%
1-1/2” or 2” Tri-Clamp
Hastelloy C-276
16 oz (454 g)
DairyFood/BeveragePharmaceutical/
BiotechnologyBalance/Silo tanks
Standard Hastelloy C-276 diaphragm
Accessible electrical conduit connection design
Optional LED displayZero and Span
adjusts Eliminates daily
drift issue
0-3 thru 0-500 psig0-15 thru 0-500 psia0-15 psiv
0-0.2 thru 0-35 barg0-1 thru 35 bara0-1 barv
4-20 mA4-20 mA HART Digital Signal
9-30 Vdc (14-30 with display)11.5-30 Vdc
364: ≤ ± 0.25%964: ≤ ± 0.25%
1-1/2” or 2” Tri-Clamp
Hastelloy C-276
40 oz (1.1 kg)
PharmaceuticalFood/BeverageDairyPaintConfections
316L SS constructionNo oil fillFlush sensorCIP/SIP designExotic material
wetted parts available
Magnetically coupled external controls (351)
5:1 ranging (351)
350: 0-100 thru 0-1000 psis/a351: 0-100, 400, 1000 psis/a
350: 0-7 thru0-70 barg/s/a351: 0-7, 28, 70barg/s/a
4-20 mA
350: 10-36 Vdc351: 9.5-40 Vdc
≤ ± 0.65%
1”, 1-1/2”, 2”, 2-1/2” Tri-Clamp
316L SS
350: 16 oz (454 g)351: 30 oz (850 g)
PharmaceuticalMedicalFoodDairyIndustrial
Easy set-upMetal to metal sealFlush diaphragmZero volume
pressure port
0-1,000 thru 0-30,000 psig
0-70 thru0-2,000 barg
3 mV/V4-20 mA
10 Vdc16-30 Vdc
≤ ± 0.50%
3/4” – 16 UNF – 2B
Inconel 718
8 oz (227 g)
industrial test and control sanitary, food and medical
idp10274 | 374800 series148 | 248 | 348pt 139249 | 349100 series
HydraulicsPneumaticsTest systemsPumps/CompressorsMiningOff-road vehiclesWater treatment
plants
DIN connector standard
Spike resistantHigh cycle lifeStainless steel
constructionExternal zero adjust
0-5 thru 0-15,000 psig0-10 thru 0-100 psia0-15 psiv
0-0.35 thru0-1,000 barg0-0.7 thru 0 - 7 bara0-1 barv
0-5 (0-10) Vdc4-20 mA
10-40 (15-40) Vdc10-40 Vdc
≤ ± 0.60%
1/4” NPT Female
316L SSTBuna-N O-ring0-200 psi
10 oz (284 g)
247 | 347 517 | ww517 360 | 960 363 364 | 964 350 | 351 pt 375
APPROVALS
APPLICATIONS
FEATURESBENEFITS
STANDARD PSIRANGESAvailable in: MPa,kgf/cm2, et al
STANDARD BARRANGES
FULL SCALE OUTPUT(FSO)
NOMINAL INPUTVOLTAGES
ACCURACY[COMBINEDERROR]
STANDARDPRESSURECONNECTION
STANDARD WETTEDPARTS
WEIGHT
APPROVALS
APPLICATIONS
FEATURESBENEFITS
STANDARD PSIRANGESAvailable in: MPa,kgf/cm2, et al
STANDARD BARRANGES
FULL SCALE OUTPUT(FSO)
NOMINAL INPUTVOLTAGES
ACCURACY[COMBINEDERROR]
STANDARDPRESSURECONNECTION
STANDARD WETTEDPARTS
WEIGHT
water and wastewater
This information is accurate to the best of the manufacturer’s knowledge, however, we reserve the right to change specifications at any time.
Oil well fracturing and cementing
Acid treatmentGravel packagingWell head
No mounting stressShock and vibration
resistantNACE compliantNon-clogging port
0-5,000 thru 0-20,000 psis
0-350 thru0-1,400 bars
4-20 mA
9-28 Vdc
≤ ± 0.25%
WECO 1502 UnionWECO 2002 Union optional
Inconel X750,Inconel 718
5 lbs 8 oz (2.5 kg)
Drill toolsOil rigsOil platformsDownhole unit
Subminiature design
Temperature compensated
LightweightInconel wetted
parts
0-5,000 thru 0-25,000 psis
0-350 thru0-1,750 bars
1.97 mV/V
5 Vdc
≤ ± 0.25%
7/16-20UNF-2ANPT Male
Inconel 718
1.8 oz (51 g)
Rig safety systemsWell headOil pumpingNatural gas
pipelinesHazardous
locations
Hermetically sealedenclosure
316L SS housingLess than 5” height1.5” diameter< 1.3 mA current
consumption available
NACE complaint materials available
0-100 thru0-100,000 psis/a
0-7 thru0-7,000 bars/a
4-20 mA0-5 (0-10) Vdc2 mV/V
11.5-30 Vdc9-30 Vdc10-15 Vdc
≤ ± 0.15% ≤ ± 0.25% (≥ 20K psi)≤ ± 0.30% (100 psi)
1/4” NPT Female≤ 15K psiHigh pressure tube≥ 20K psi
15 –5 PH SS≤15K psiPH 13-8 Mo SS>20K psi
24 oz (680 g)
Polymer productionOil rigsShipboard/MarineWastewaterHazardous
locations
HART features:- 5:1 rangeability- remote config.- multi-drop network316 SS housing1.5” diameterSubmersibleNACE compliant
materials available
0-100 thru0-100,000 psis/a
0-7 thru0-7,000 bars/a
4-20 mA HARTDigital signal
11.5-30 Vdc
≤ ± 0.10% (≤ 20K psi)≤ ± 0.25% (> 20K psi)
1/4” NPT Female ≤ 15K psi High pressure tube≥ 20K psi
15 –5 PH SS≤15K psiPH 13-8 Mo SS >20K psi
24 oz (680 g)
Rig safety systems
Chemical processing
Shipboard/MarineGas compressorsHazardous
locations
Magnetically coupled external controls
5:1 rangingHermetically sealed316 SS housing1.5” diameter< 7” heightNACE compliant
materials available
0-100 thru0-100,000 psis/a
0-7 thru0-7,000 bars/a
4-20 mA
11.5-30 Vdc
≤ ± 0.15% ≤ ± 0.25% (≥ 20K psi)≤ ± 0.30% (100 psi)
1/4” NPT Female≤ 15K psi High pressure tube≥ 20K psi
15 –5 PH SS≤15K psiPH 13-8 Mo SS>20K psi
24 oz (680 g)
Sour gas wellsSecondary oil
recoveryOil pumpingHazardous
locations
40K psi secondarycontainment vessel
Hermetically sealedNACE/API 6A
compliantInconel 718 Magnetically
coupled external controls
0-100 thru 0-20,000 psis/a
0-7 thru0-1,400 bars/a
4-20 mA
11.5-30 Vdc
≤ ± 0.25% (150-20K psi)≤ ± 0.50% (100 psi)
1/4” NPT Female≤ 10K psi Autoclave(AE) F250-C ≥ 15K psi
Hastelloy C-276Inconel 718
4 lbs. 6 oz (1.9 kg)
Fuel tank levelChemical tank levelGas compressorsChemical
processingHazardous
locations
All welded construction
Optional externalzero and span adjusts
316L SS wetted parts
Ranges down to 20” WC
Hazardous locations
0-3 thru 0-5000 psig/s0-15 thru 0-500 psia0-15 psiv
0-0.2 thru 0-350 barg/s0-1 thru 0-35 bara0-1 barv
4-20 mA0-5 (0-10) Vdc5-10 mV/V
11.5-30 Vdc9-30 Vdc10-15 Vdc
≤ ± 0.15%(> 200psi)≤ ± 0.25% (≤ 200psi)
1/4” NPT Female
316L SS
10 oz (284 g)
Fuel tank levelChemical tank levelGas compressorsChemical
processingHazardous
locations
HART features:- 10:1 rangeability- remote config.- multi-drop networkAll 316L SS
construction 1.5” diameterSubmersible
0-3 thru 0-5000 psig/s0-15 thru 0-500 psia0-15 psiv
0-0.2 thru 0-350barg/s0-1 thru 0 35 bara0-1 barv
4-20 mA HARTDigital signal
11.5-30 Vdc
≤ ± 0.10%
1/4” NPT Female
316L SS
24 oz (680 g)
GOST. NEPSI
Chemical processing
Oil and gasPolymer plantsHazardous
locations
HART features:- 10:1 rangeability- remote config.- multi-drop networkNAMUROutput sent directly
to DCS or PLCImproved frequency
response
0-5 thru0-72,500 psis/g/a
0-0.35 thru 0-5000 barg/s/a
4-20 mA HARTDigital signal
16-30 Vdc
2281: ≤ ± 0.25%2280: ≤ ± 0.5%
Application specific
15-5 PH SS17-4 PH SS
24 oz (680 g)
Chemical processing
Oil and gasPolymer plantsHazardous locations
Foundation FieldBusEasy hand-held
configurationOutput sent directly
to DCS or PLCImproved frequency
response
0-5 thru0-72,500 psis/g/a
0-0.35 thru 0-5000 barg/s/a
FOUNDATION FieldBus H1
9-24 Vdc
2281: ≤ ± 0.25%2280: ≤ ± 0.5%
Application specific
15-5 PH SS17-4 PH SS
24 oz (680 g)
SlurriesChemical
processingPulp and paperPolymer plants
Flush diaphragmZero volume
pressure portEasy set-upInternal calibration
shunt
0-15 thru 0-10,000 psig
0-1 thru0-700 barg
3 mV/V
10 Vdc
≤ ± 0.5%
3/4”-16 UNF-3A
17-4 PH SS
5 oz (142 g)
General purposeTest standsDynosHigh volume usage
CANopen availableEasy set-up via
directional BUS communications
SST constructionFlush sensor modelHigh accuracy
0-300 thru 0-15,000 psig
0-20 thru0-1,000 barg
3 mV/V0-5 (1-6) Vdc0-10 (1-11) Vdc4-20 mACANopen
10 Vdc10-32 Vdc15-32 Vdc10-36 Vdc18-32 Vdc
≤ ± 0.25%
Int. ISO 2281/1-G1/4Ext. DIN 3852-AG1/4AFlush M18x1.5
15-5 PH SS
5 oz (142 g)
General industrialHydraulicsPneumaticsCompressorsOff-road vehicleWater treatment
Low costSmall sizeEnvironmentally
sealedHigh cycle life
(1,000,000 cycles)Shock resistantStainless steel
construction
0-100 thru0-15,000 psig
0-7 thru0-1,400 barg
0-5 (0-10) Vdc 4-20 mA
10-30 Vdc
≤ ± 0.65%
1/4” NPT Female
15-5 PH SS
10 oz (284 g)
Hostile environments
Test standsDynosControl systemsDie casting
Stainless steel construction
Spike resistant High accuracyHigh cycle lifePrecise pressure
measurementDeviceNET
availableAll pressure ranges
0-15 thru0-10,000 psig
0-1 thru0-700 barg
3 mV/V0-5 (1-6) Vdc0-10 (1-11) Vdc4-20 mADeviceNet
10 Vdc10-36 Vdc14-36 Vdc12-36 Vdc11-25 Vdc
≤ ± 0.25%
1/4” NPT Male
15-5 PH SS
8 oz (227 g)
Test standsMetrologyLaboratory/ResearchAutomotive test
systemsSemiconductorsCaliper testingDynos
≤ ± 0.05% linearityDigitally
compensatedSmall sizeFast responseRFI/EMI protectedExternal adjustments Stainless steel
constructionMultiple connector,
port, perf. options
0-2 thru 0-100,000 psig/a0-15 psiv
0-0.14 thru 0-7,000 barg/s/a0-1 barv
0-5 (0-10) Vdc4-20 mA
9-30 (13-30) Vdc9-30 Vdc
≤ ± 0.05% (≤ 5Kpsi)≤ ± 0.15% (> 5Kpsi)
1/4” NPT Female
316L SST ≤ 5K psi15-5 ≥ 5K-15K psiPH 13-8 Mo SS ≥ 20K psi
15 oz (425 g)
APPROVALS
APPLICATIONS
FEATURESBENEFITS
STANDARD PSIRANGESAvailable in: MPa,kgf/cm2, et al
STANDARD BARRANGES
FULL SCALE OUTPUT(FSO)
NOMINAL INPUTVOLTAGES
ACCURACY[COMBINEDERROR]
STANDARDPRESSURECONNECTION
STANDARD WETTEDPARTS
WEIGHT
oil, gas and petrochemical industrial test and control
509 pt 332 570 | 770 | 870 970 571 572 548 | 748 | 848 948 spx ffx pt 311 ida series 243 | 343 270 245 | 345model
Challenge Our Engineering, Manufacturing and Sales Team with your pressure or level application. We can solve it!
(available)
Test standsJet EngineBrake HydraulicPumps/Compressors
Top mounted, sealed externaladjustments
Stainless steel construction
High accuracyInternal calibration
circuit≤ ± 0.05% linearity
available
0-2 thru 0-100K psig/a0-15 psiv
0-0.14 thru0-7,000 barg/s/a0-1 barv
0-5 (0-10) Vdc4-20 mA
9-40 (12-28) Vdc9-40 Vdc
≤ ± 0.10% (≤ 5K psi)≤ ± 0.15% (> 5K psi)
1/4” NPT Female0-15K psiHigh pressure Tube20K-100K psi
304, 316L SS < 5K psi15-5 PH SS 5K -15K psiPH 13-8 Mo SS ≥ 20K psi
15 oz (425 g)
Hydraulic and pneumatic systems
Injection moldingOre trucksCranes
Long life, low costSpike and corrosion
resistantQuick calibrationWithstands severe
environmentsTemp compensatedSurface mount
technology
0-15 thru0-10,000 psig
0-1 thru0-700 barg
3 mV/V0-5 (1-6) Vdc0-10 (1-11) Vdc4-20 mA
10 Vdc11-32 Vdc16-32 Vdc14-36 Vdc
≤ ± 0.50%
1/8” NPT Female
15-5 PH SS
5 oz (142 g)
Test standsDynamometersRoad test systemsBrake test stands
< 2.5” H, 1”DTemps to 285°FPressure/vacuum
serviceAll welded SSTWestern regional
wiring code option
0-15 thru 0-10,000 psig
0-1 thru0-700 barg
3 mV/V
10 Vdc
≤ ± 0.50%
1/8” NPT Female
15-5 PH SS
5 oz (142 g)
Die castingStamping pressesRolling millsHydraulic systemsTest stands
3X overpressureStainless steel
construction< 1 millisecond
response timeMultiple connector,
port, performance options available
0-3 thru 0-15,000 psig 0-200 psia0-15 psiv
0-0.2 thru0-1,000 barg0-14 bara0-1 barv
2.5-10 mV/V0-5 (0-10) Vdc4-20 mA
10-15 Vdc9-30 (12-30) Vdc9-30 Vdc
≤ ± 0.15% (> 200 psi)≤ ± 0.25% (≤ 200 psi)
1/4” NPT Female
304,316 L SST15-5 PH SS
10 oz (284 g)
Automotive test stands
AerospaceMilitaryGeneral industrialHydraulic systems
All welded SST≤ ± 0.5%/100°F
temperature performance
Internal calibration circuit
Easy set-upField proven
technologyExternal zero and
span adjustments
0-5 thru 0-30,000 psig/s/a0-15 psiv
0-0.35 thru0-2,000 barg/s/a0-1 barv
3 mV/V0-5 Vdc0-10 Vdc
10 Vdc24-32 Vdc24-32 Vdc
8X2: ≤ ± 0.15%8X1: ≤ ± 0.25%8X0: ≤ ± 0.50%
1/4” NPT Female
17-4 PH SS15-5 PH SS
13-17 oz (369-482 g)
Leak testEngine test standsAutoclavesWind tunnels
Fast response1,000 psid
overpressure 3,000 psid optional
Low range wet/wet DP
mV/V output availableHastelloy wetted
parts available
0-0.5” WCD thru0-3.000 psidLine Pressure: 1,000 psi
0-5” WCD thru0-7 bardLine Pressure: 70 bar
0-5 (0-10) Vdc4-20 mA
10-42 (15-45) Vdc10-42 Vdc
≤ ± 0.20%
1/4” NPT Female
316 L SSViton® O-ring
56 oz (1.6 kg)
WastewaterNatural gas
processingFood processingShipboard/Marine
HART DP30:1 rangingPush button
configuration and calibration
Local digital indication
Exotic wetted materials available
0-5” WCD thru0-300 psid
0-5” WCD thru0-20 bard
1-5 Vdc4-20 mA4-20 mA HART Digital Signal
9-15.5 Vdc11.5-42 Vdc17-42 Vdc
≤ ± 0.20% maximum
Application specific (Remote seals shown)
316L SS
12 lbs (5.4 kg)
Reservoirs/DamsGround water wellsEPA plant studiesChemical
processingShipboard/Marine
0.87” diameter316L SS constructionO-ring free designAll welded
transmitterIntegral atmospheric
reference tube
0-2 thru 0-500 psig(40” thru 1155”WC)
0-0.14 thru0-35 barg
4-20 mA
9-30 Vdc
≤ ± 0.10%(≤ ± 0.25% max)
5/8” - 18 UNF Female
316L SSTefzel or Polyurethane
10 oz (284 g)
Dairy/Food/BeveragePharmaceutical/
BiotechnologyBalance tanksSilo tanks
Less than 1 minute CIP/SIP recovery
Flush Hastelloy diaphragm
316L SS, NEMA 4X housing
3:1 rangingZero and Span
adjustOptional display
0-30” thru 0-750” WCG
0-30” WCG thru0-2 barg
4-20 mA4-20 mA HART Digital Signal
9-30 Vdc (14-30 with display)11.5-30 Vdc
360: ≤ ± 0.10%960: ≤ ± 0.15%
21 adapter types available
Hastelloy C-276
4 lbs. (1.8kg)
Sanitary tank levelBeverage
processingFood/Dairy
processingPharmaceutical
processing
Flush Hastelloy diaphragm
Unique Gortex breathing system
Less than 1 minute thermal recovery time
All welded SS construction
Zero and spanadjusts
0-30” WCG thru 0-500 psig0-15 thru 0-500 psia0-15 psiv
0-30” WCG thru0-35 barg0-1 thru 0 - 35 bara0-1 barv
4-20 mA
9-30 Vdc
≤ ± 0.25%
1-1/2” or 2” Tri-Clamp
Hastelloy C-276
16 oz (454 g)
DairyFood/BeveragePharmaceutical/
BiotechnologyBalance/Silo tanks
Standard Hastelloy C-276 diaphragm
Accessible electrical conduit connection design
Optional LED displayZero and Span
adjusts Eliminates daily
drift issue
0-3 thru 0-500 psig0-15 thru 0-500 psia0-15 psiv
0-0.2 thru 0-35 barg0-1 thru 35 bara0-1 barv
4-20 mA4-20 mA HART Digital Signal
9-30 Vdc (14-30 with display)11.5-30 Vdc
364: ≤ ± 0.25%964: ≤ ± 0.25%
1-1/2” or 2” Tri-Clamp
Hastelloy C-276
40 oz (1.1 kg)
PharmaceuticalFood/BeverageDairyPaintConfections
316L SS constructionNo oil fillFlush sensorCIP/SIP designExotic material
wetted parts available
Magnetically coupled external controls (351)
5:1 ranging (351)
350: 0-100 thru 0-1000 psis/a351: 0-100, 400, 1000 psis/a
350: 0-7 thru0-70 barg/s/a351: 0-7, 28, 70barg/s/a
4-20 mA
350: 10-36 Vdc351: 9.5-40 Vdc
≤ ± 0.65%
1”, 1-1/2”, 2”, 2-1/2” Tri-Clamp
316L SS
350: 16 oz (454 g)351: 30 oz (850 g)
PharmaceuticalMedicalFoodDairyIndustrial
Easy set-upMetal to metal sealFlush diaphragmZero volume
pressure port
0-1,000 thru 0-30,000 psig
0-70 thru0-2,000 barg
3 mV/V4-20 mA
10 Vdc16-30 Vdc
≤ ± 0.50%
3/4” – 16 UNF – 2B
Inconel 718
8 oz (227 g)
industrial test and control sanitary, food and medical
idp10274 | 374800 series148 | 248 | 348pt 139249 | 349100 series
HydraulicsPneumaticsTest systemsPumps/CompressorsMiningOff-road vehiclesWater treatment
plants
DIN connector standard
Spike resistantHigh cycle lifeStainless steel
constructionExternal zero adjust
0-5 thru 0-15,000 psig0-10 thru 0-100 psia0-15 psiv
0-0.35 thru0-1,000 barg0-0.7 thru 0 - 7 bara0-1 barv
0-5 (0-10) Vdc4-20 mA
10-40 (15-40) Vdc10-40 Vdc
≤ ± 0.60%
1/4” NPT Female
316L SSTBuna-N O-ring0-200 psi
10 oz (284 g)
247 | 347 517 | ww517 360 | 960 363 364 | 964 350 | 351 pt 375
APPROVALS
APPLICATIONS
FEATURESBENEFITS
STANDARD PSIRANGESAvailable in: MPa,kgf/cm2, et al
STANDARD BARRANGES
FULL SCALE OUTPUT(FSO)
NOMINAL INPUTVOLTAGES
ACCURACY[COMBINEDERROR]
STANDARDPRESSURECONNECTION
STANDARD WETTEDPARTS
WEIGHT
APPROVALS
APPLICATIONS
FEATURESBENEFITS
STANDARD PSIRANGESAvailable in: MPa,kgf/cm2, et al
STANDARD BARRANGES
FULL SCALE OUTPUT(FSO)
NOMINAL INPUTVOLTAGES
ACCURACY[COMBINEDERROR]
STANDARDPRESSURECONNECTION
STANDARD WETTEDPARTS
WEIGHT
water and wastewater
This information is accurate to the best of the manufacturer’s knowledge, however, we reserve the right to change specifications at any time.
Oil well fracturing and cementing
Acid treatmentGravel packagingWell head
No mounting stressShock and vibration
resistantNACE compliantNon-clogging port
0-5,000 thru 0-20,000 psis
0-350 thru0-1,400 bars
4-20 mA
9-28 Vdc
≤ ± 0.25%
WECO 1502 UnionWECO 2002 Union optional
Inconel X750,Inconel 718
5 lbs 8 oz (2.5 kg)
Drill toolsOil rigsOil platformsDownhole unit
Subminiature design
Temperature compensated
LightweightInconel wetted
parts
0-5,000 thru 0-25,000 psis
0-350 thru0-1,750 bars
1.97 mV/V
5 Vdc
≤ ± 0.25%
7/16-20UNF-2ANPT Male
Inconel 718
1.8 oz (51 g)
Rig safety systemsWell headOil pumpingNatural gas
pipelinesHazardous
locations
Hermetically sealedenclosure
316L SS housingLess than 5” height1.5” diameter< 1.3 mA current
consumption available
NACE complaint materials available
0-100 thru0-100,000 psis/a
0-7 thru0-7,000 bars/a
4-20 mA0-5 (0-10) Vdc2 mV/V
11.5-30 Vdc9-30 Vdc10-15 Vdc
≤ ± 0.15% ≤ ± 0.25% (≥ 20K psi)≤ ± 0.30% (100 psi)
1/4” NPT Female≤ 15K psiHigh pressure tube≥ 20K psi
15 –5 PH SS≤15K psiPH 13-8 Mo SS>20K psi
24 oz (680 g)
Polymer productionOil rigsShipboard/MarineWastewaterHazardous
locations
HART features:- 5:1 rangeability- remote config.- multi-drop network316 SS housing1.5” diameterSubmersibleNACE compliant
materials available
0-100 thru0-100,000 psis/a
0-7 thru0-7,000 bars/a
4-20 mA HARTDigital signal
11.5-30 Vdc
≤ ± 0.10% (≤ 20K psi)≤ ± 0.25% (> 20K psi)
1/4” NPT Female ≤ 15K psi High pressure tube≥ 20K psi
15 –5 PH SS≤15K psiPH 13-8 Mo SS >20K psi
24 oz (680 g)
Rig safety systems
Chemical processing
Shipboard/MarineGas compressorsHazardous
locations
Magnetically coupled external controls
5:1 rangingHermetically sealed316 SS housing1.5” diameter< 7” heightNACE compliant
materials available
0-100 thru0-100,000 psis/a
0-7 thru0-7,000 bars/a
4-20 mA
11.5-30 Vdc
≤ ± 0.15% ≤ ± 0.25% (≥ 20K psi)≤ ± 0.30% (100 psi)
1/4” NPT Female≤ 15K psi High pressure tube≥ 20K psi
15 –5 PH SS≤15K psiPH 13-8 Mo SS>20K psi
24 oz (680 g)
Sour gas wellsSecondary oil
recoveryOil pumpingHazardous
locations
40K psi secondarycontainment vessel
Hermetically sealedNACE/API 6A
compliantInconel 718 Magnetically
coupled external controls
0-100 thru 0-20,000 psis/a
0-7 thru0-1,400 bars/a
4-20 mA
11.5-30 Vdc
≤ ± 0.25% (150-20K psi)≤ ± 0.50% (100 psi)
1/4” NPT Female≤ 10K psi Autoclave(AE) F250-C ≥ 15K psi
Hastelloy C-276Inconel 718
4 lbs. 6 oz (1.9 kg)
Fuel tank levelChemical tank levelGas compressorsChemical
processingHazardous
locations
All welded construction
Optional externalzero and span adjusts
316L SS wetted parts
Ranges down to 20” WC
Hazardous locations
0-3 thru 0-5000 psig/s0-15 thru 0-500 psia0-15 psiv
0-0.2 thru 0-350 barg/s0-1 thru 0-35 bara0-1 barv
4-20 mA0-5 (0-10) Vdc5-10 mV/V
11.5-30 Vdc9-30 Vdc10-15 Vdc
≤ ± 0.15%(> 200psi)≤ ± 0.25% (≤ 200psi)
1/4” NPT Female
316L SS
10 oz (284 g)
Fuel tank levelChemical tank levelGas compressorsChemical
processingHazardous
locations
HART features:- 10:1 rangeability- remote config.- multi-drop networkAll 316L SS
construction 1.5” diameterSubmersible
0-3 thru 0-5000 psig/s0-15 thru 0-500 psia0-15 psiv
0-0.2 thru 0-350barg/s0-1 thru 0 35 bara0-1 barv
4-20 mA HARTDigital signal
11.5-30 Vdc
≤ ± 0.10%
1/4” NPT Female
316L SS
24 oz (680 g)
GOST. NEPSI
Chemical processing
Oil and gasPolymer plantsHazardous
locations
HART features:- 10:1 rangeability- remote config.- multi-drop networkNAMUROutput sent directly
to DCS or PLCImproved frequency
response
0-5 thru0-72,500 psis/g/a
0-0.35 thru 0-5000 barg/s/a
4-20 mA HARTDigital signal
16-30 Vdc
2281: ≤ ± 0.25%2280: ≤ ± 0.5%
Application specific
15-5 PH SS17-4 PH SS
24 oz (680 g)
Chemical processing
Oil and gasPolymer plantsHazardous locations
Foundation FieldBusEasy hand-held
configurationOutput sent directly
to DCS or PLCImproved frequency
response
0-5 thru0-72,500 psis/g/a
0-0.35 thru 0-5000 barg/s/a
FOUNDATION FieldBus H1
9-24 Vdc
2281: ≤ ± 0.25%2280: ≤ ± 0.5%
Application specific
15-5 PH SS17-4 PH SS
24 oz (680 g)
SlurriesChemical
processingPulp and paperPolymer plants
Flush diaphragmZero volume
pressure portEasy set-upInternal calibration
shunt
0-15 thru 0-10,000 psig
0-1 thru0-700 barg
3 mV/V
10 Vdc
≤ ± 0.5%
3/4”-16 UNF-3A
17-4 PH SS
5 oz (142 g)
General purposeTest standsDynosHigh volume usage
CANopen availableEasy set-up via
directional BUS communications
SST constructionFlush sensor modelHigh accuracy
0-300 thru 0-15,000 psig
0-20 thru0-1,000 barg
3 mV/V0-5 (1-6) Vdc0-10 (1-11) Vdc4-20 mACANopen
10 Vdc10-32 Vdc15-32 Vdc10-36 Vdc18-32 Vdc
≤ ± 0.25%
Int. ISO 2281/1-G1/4Ext. DIN 3852-AG1/4AFlush M18x1.5
15-5 PH SS
5 oz (142 g)
General industrialHydraulicsPneumaticsCompressorsOff-road vehicleWater treatment
Low costSmall sizeEnvironmentally
sealedHigh cycle life
(1,000,000 cycles)Shock resistantStainless steel
construction
0-100 thru0-15,000 psig
0-7 thru0-1,400 barg
0-5 (0-10) Vdc 4-20 mA
10-30 Vdc
≤ ± 0.65%
1/4” NPT Female
15-5 PH SS
10 oz (284 g)
Hostile environments
Test standsDynosControl systemsDie casting
Stainless steel construction
Spike resistant High accuracyHigh cycle lifePrecise pressure
measurementDeviceNET
availableAll pressure ranges
0-15 thru0-10,000 psig
0-1 thru0-700 barg
3 mV/V0-5 (1-6) Vdc0-10 (1-11) Vdc4-20 mADeviceNet
10 Vdc10-36 Vdc14-36 Vdc12-36 Vdc11-25 Vdc
≤ ± 0.25%
1/4” NPT Male
15-5 PH SS
8 oz (227 g)
Test standsMetrologyLaboratory/ResearchAutomotive test
systemsSemiconductorsCaliper testingDynos
≤ ± 0.05% linearityDigitally
compensatedSmall sizeFast responseRFI/EMI protectedExternal adjustments Stainless steel
constructionMultiple connector,
port, perf. options
0-2 thru 0-100,000 psig/a0-15 psiv
0-0.14 thru 0-7,000 barg/s/a0-1 barv
0-5 (0-10) Vdc4-20 mA
9-30 (13-30) Vdc9-30 Vdc
≤ ± 0.05% (≤ 5Kpsi)≤ ± 0.15% (> 5Kpsi)
1/4” NPT Female
316L SST ≤ 5K psi15-5 ≥ 5K-15K psiPH 13-8 Mo SS ≥ 20K psi
15 oz (425 g)
APPROVALS
APPLICATIONS
FEATURESBENEFITS
STANDARD PSIRANGESAvailable in: MPa,kgf/cm2, et al
STANDARD BARRANGES
FULL SCALE OUTPUT(FSO)
NOMINAL INPUTVOLTAGES
ACCURACY[COMBINEDERROR]
STANDARDPRESSURECONNECTION
STANDARD WETTEDPARTS
WEIGHT
oil, gas and petrochemical industrial test and control
509 pt 332 570 | 770 | 870 970 571 572 548 | 748 | 848 948 spx ffx pt 311 ida series 243 | 343 270 245 | 345model
Challenge Our Engineering, Manufacturing and Sales Team with your pressure or level application. We can solve it!
(available)
Test standsJet EngineBrake HydraulicPumps/Compressors
Top mounted, sealed externaladjustments
Stainless steel construction
High accuracyInternal calibration
circuit≤ ± 0.05% linearity
available
0-2 thru 0-100K psig/a0-15 psiv
0-0.14 thru0-7,000 barg/s/a0-1 barv
0-5 (0-10) Vdc4-20 mA
9-40 (12-28) Vdc9-40 Vdc
≤ ± 0.10% (≤ 5K psi)≤ ± 0.15% (> 5K psi)
1/4” NPT Female0-15K psiHigh pressure Tube20K-100K psi
304, 316L SS < 5K psi15-5 PH SS 5K -15K psiPH 13-8 Mo SS ≥ 20K psi
15 oz (425 g)
Hydraulic and pneumatic systems
Injection moldingOre trucksCranes
Long life, low costSpike and corrosion
resistantQuick calibrationWithstands severe
environmentsTemp compensatedSurface mount
technology
0-15 thru0-10,000 psig
0-1 thru0-700 barg
3 mV/V0-5 (1-6) Vdc0-10 (1-11) Vdc4-20 mA
10 Vdc11-32 Vdc16-32 Vdc14-36 Vdc
≤ ± 0.50%
1/8” NPT Female
15-5 PH SS
5 oz (142 g)
Test standsDynamometersRoad test systemsBrake test stands
< 2.5” H, 1”DTemps to 285°FPressure/vacuum
serviceAll welded SSTWestern regional
wiring code option
0-15 thru 0-10,000 psig
0-1 thru0-700 barg
3 mV/V
10 Vdc
≤ ± 0.50%
1/8” NPT Female
15-5 PH SS
5 oz (142 g)
Die castingStamping pressesRolling millsHydraulic systemsTest stands
3X overpressureStainless steel
construction< 1 millisecond
response timeMultiple connector,
port, performance options available
0-3 thru 0-15,000 psig 0-200 psia0-15 psiv
0-0.2 thru0-1,000 barg0-14 bara0-1 barv
2.5-10 mV/V0-5 (0-10) Vdc4-20 mA
10-15 Vdc9-30 (12-30) Vdc9-30 Vdc
≤ ± 0.15% (> 200 psi)≤ ± 0.25% (≤ 200 psi)
1/4” NPT Female
304,316 L SST15-5 PH SS
10 oz (284 g)
Automotive test stands
AerospaceMilitaryGeneral industrialHydraulic systems
All welded SST≤ ± 0.5%/100°F
temperature performance
Internal calibration circuit
Easy set-upField proven
technologyExternal zero and
span adjustments
0-5 thru 0-30,000 psig/s/a0-15 psiv
0-0.35 thru0-2,000 barg/s/a0-1 barv
3 mV/V0-5 Vdc0-10 Vdc
10 Vdc24-32 Vdc24-32 Vdc
8X2: ≤ ± 0.15%8X1: ≤ ± 0.25%8X0: ≤ ± 0.50%
1/4” NPT Female
17-4 PH SS15-5 PH SS
13-17 oz (369-482 g)
Leak testEngine test standsAutoclavesWind tunnels
Fast response1,000 psid
overpressure 3,000 psid optional
Low range wet/wet DP
mV/V output availableHastelloy wetted
parts available
0-0.5” WCD thru0-3.000 psidLine Pressure: 1,000 psi
0-5” WCD thru0-7 bardLine Pressure: 70 bar
0-5 (0-10) Vdc4-20 mA
10-42 (15-45) Vdc10-42 Vdc
≤ ± 0.20%
1/4” NPT Female
316 L SSViton® O-ring
56 oz (1.6 kg)
WastewaterNatural gas
processingFood processingShipboard/Marine
HART DP30:1 rangingPush button
configuration and calibration
Local digital indication
Exotic wetted materials available
0-5” WCD thru0-300 psid
0-5” WCD thru0-20 bard
1-5 Vdc4-20 mA4-20 mA HART Digital Signal
9-15.5 Vdc11.5-42 Vdc17-42 Vdc
≤ ± 0.20% maximum
Application specific (Remote seals shown)
316L SS
12 lbs (5.4 kg)
Reservoirs/DamsGround water wellsEPA plant studiesChemical
processingShipboard/Marine
0.87” diameter316L SS constructionO-ring free designAll welded
transmitterIntegral atmospheric
reference tube
0-2 thru 0-500 psig(40” thru 1155”WC)
0-0.14 thru0-35 barg
4-20 mA
9-30 Vdc
≤ ± 0.10%(≤ ± 0.25% max)
5/8” - 18 UNF Female
316L SSTefzel or Polyurethane
10 oz (284 g)
Dairy/Food/BeveragePharmaceutical/
BiotechnologyBalance tanksSilo tanks
Less than 1 minute CIP/SIP recovery
Flush Hastelloy diaphragm
316L SS, NEMA 4X housing
3:1 rangingZero and Span
adjustOptional display
0-30” thru 0-750” WCG
0-30” WCG thru0-2 barg
4-20 mA4-20 mA HART Digital Signal
9-30 Vdc (14-30 with display)11.5-30 Vdc
360: ≤ ± 0.10%960: ≤ ± 0.15%
21 adapter types available
Hastelloy C-276
4 lbs. (1.8kg)
Sanitary tank levelBeverage
processingFood/Dairy
processingPharmaceutical
processing
Flush Hastelloy diaphragm
Unique Gortex breathing system
Less than 1 minute thermal recovery time
All welded SS construction
Zero and spanadjusts
0-30” WCG thru 0-500 psig0-15 thru 0-500 psia0-15 psiv
0-30” WCG thru0-35 barg0-1 thru 0 - 35 bara0-1 barv
4-20 mA
9-30 Vdc
≤ ± 0.25%
1-1/2” or 2” Tri-Clamp
Hastelloy C-276
16 oz (454 g)
DairyFood/BeveragePharmaceutical/
BiotechnologyBalance/Silo tanks
Standard Hastelloy C-276 diaphragm
Accessible electrical conduit connection design
Optional LED displayZero and Span
adjusts Eliminates daily
drift issue
0-3 thru 0-500 psig0-15 thru 0-500 psia0-15 psiv
0-0.2 thru 0-35 barg0-1 thru 35 bara0-1 barv
4-20 mA4-20 mA HART Digital Signal
9-30 Vdc (14-30 with display)11.5-30 Vdc
364: ≤ ± 0.25%964: ≤ ± 0.25%
1-1/2” or 2” Tri-Clamp
Hastelloy C-276
40 oz (1.1 kg)
PharmaceuticalFood/BeverageDairyPaintConfections
316L SS constructionNo oil fillFlush sensorCIP/SIP designExotic material
wetted parts available
Magnetically coupled external controls (351)
5:1 ranging (351)
350: 0-100 thru 0-1000 psis/a351: 0-100, 400, 1000 psis/a
350: 0-7 thru0-70 barg/s/a351: 0-7, 28, 70barg/s/a
4-20 mA
350: 10-36 Vdc351: 9.5-40 Vdc
≤ ± 0.65%
1”, 1-1/2”, 2”, 2-1/2” Tri-Clamp
316L SS
350: 16 oz (454 g)351: 30 oz (850 g)
PharmaceuticalMedicalFoodDairyIndustrial
Easy set-upMetal to metal sealFlush diaphragmZero volume
pressure port
0-1,000 thru 0-30,000 psig
0-70 thru0-2,000 barg
3 mV/V4-20 mA
10 Vdc16-30 Vdc
≤ ± 0.50%
3/4” – 16 UNF – 2B
Inconel 718
8 oz (227 g)
industrial test and control sanitary, food and medical
idp10274 | 374800 series148 | 248 | 348pt 139249 | 349100 series
HydraulicsPneumaticsTest systemsPumps/CompressorsMiningOff-road vehiclesWater treatment
plants
DIN connector standard
Spike resistantHigh cycle lifeStainless steel
constructionExternal zero adjust
0-5 thru 0-15,000 psig0-10 thru 0-100 psia0-15 psiv
0-0.35 thru0-1,000 barg0-0.7 thru 0 - 7 bara0-1 barv
0-5 (0-10) Vdc4-20 mA
10-40 (15-40) Vdc10-40 Vdc
≤ ± 0.60%
1/4” NPT Female
316L SSTBuna-N O-ring0-200 psi
10 oz (284 g)
247 | 347 517 | ww517 360 | 960 363 364 | 964 350 | 351 pt 375
APPROVALS
APPLICATIONS
FEATURESBENEFITS
STANDARD PSIRANGESAvailable in: MPa,kgf/cm2, et al
STANDARD BARRANGES
FULL SCALE OUTPUT(FSO)
NOMINAL INPUTVOLTAGES
ACCURACY[COMBINEDERROR]
STANDARDPRESSURECONNECTION
STANDARD WETTEDPARTS
WEIGHT
APPROVALS
APPLICATIONS
FEATURESBENEFITS
STANDARD PSIRANGESAvailable in: MPa,kgf/cm2, et al
STANDARD BARRANGES
FULL SCALE OUTPUT(FSO)
NOMINAL INPUTVOLTAGES
ACCURACY[COMBINEDERROR]
STANDARDPRESSURECONNECTION
STANDARD WETTEDPARTS
WEIGHT
water and wastewater
This information is accurate to the best of the manufacturer’s knowledge, however, we reserve the right to change specifications at any time.
Oil well fracturing and cementing
Acid treatmentGravel packagingWell head
No mounting stressShock and vibration
resistantNACE compliantNon-clogging port
0-5,000 thru 0-20,000 psis
0-350 thru0-1,400 bars
4-20 mA
9-28 Vdc
≤ ± 0.25%
WECO 1502 UnionWECO 2002 Union optional
Inconel X750,Inconel 718
5 lbs 8 oz (2.5 kg)
Drill toolsOil rigsOil platformsDownhole unit
Subminiature design
Temperature compensated
LightweightInconel wetted
parts
0-5,000 thru 0-25,000 psis
0-350 thru0-1,750 bars
1.97 mV/V
5 Vdc
≤ ± 0.25%
7/16-20UNF-2ANPT Male
Inconel 718
1.8 oz (51 g)
Rig safety systemsWell headOil pumpingNatural gas
pipelinesHazardous
locations
Hermetically sealedenclosure
316L SS housingLess than 5” height1.5” diameter< 1.3 mA current
consumption available
NACE complaint materials available
0-100 thru0-100,000 psis/a
0-7 thru0-7,000 bars/a
4-20 mA0-5 (0-10) Vdc2 mV/V
11.5-30 Vdc9-30 Vdc10-15 Vdc
≤ ± 0.15% ≤ ± 0.25% (≥ 20K psi)≤ ± 0.30% (100 psi)
1/4” NPT Female≤ 15K psiHigh pressure tube≥ 20K psi
15 –5 PH SS≤15K psiPH 13-8 Mo SS>20K psi
24 oz (680 g)
Polymer productionOil rigsShipboard/MarineWastewaterHazardous
locations
HART features:- 5:1 rangeability- remote config.- multi-drop network316 SS housing1.5” diameterSubmersibleNACE compliant
materials available
0-100 thru0-100,000 psis/a
0-7 thru0-7,000 bars/a
4-20 mA HARTDigital signal
11.5-30 Vdc
≤ ± 0.10% (≤ 20K psi)≤ ± 0.25% (> 20K psi)
1/4” NPT Female ≤ 15K psi High pressure tube≥ 20K psi
15 –5 PH SS≤15K psiPH 13-8 Mo SS >20K psi
24 oz (680 g)
Rig safety systems
Chemical processing
Shipboard/MarineGas compressorsHazardous
locations
Magnetically coupled external controls
5:1 rangingHermetically sealed316 SS housing1.5” diameter< 7” heightNACE compliant
materials available
0-100 thru0-100,000 psis/a
0-7 thru0-7,000 bars/a
4-20 mA
11.5-30 Vdc
≤ ± 0.15% ≤ ± 0.25% (≥ 20K psi)≤ ± 0.30% (100 psi)
1/4” NPT Female≤ 15K psi High pressure tube≥ 20K psi
15 –5 PH SS≤15K psiPH 13-8 Mo SS>20K psi
24 oz (680 g)
Sour gas wellsSecondary oil
recoveryOil pumpingHazardous
locations
40K psi secondarycontainment vessel
Hermetically sealedNACE/API 6A
compliantInconel 718 Magnetically
coupled external controls
0-100 thru 0-20,000 psis/a
0-7 thru0-1,400 bars/a
4-20 mA
11.5-30 Vdc
≤ ± 0.25% (150-20K psi)≤ ± 0.50% (100 psi)
1/4” NPT Female≤ 10K psi Autoclave(AE) F250-C ≥ 15K psi
Hastelloy C-276Inconel 718
4 lbs. 6 oz (1.9 kg)
Fuel tank levelChemical tank levelGas compressorsChemical
processingHazardous
locations
All welded construction
Optional externalzero and span adjusts
316L SS wetted parts
Ranges down to 20” WC
Hazardous locations
0-3 thru 0-5000 psig/s0-15 thru 0-500 psia0-15 psiv
0-0.2 thru 0-350 barg/s0-1 thru 0-35 bara0-1 barv
4-20 mA0-5 (0-10) Vdc5-10 mV/V
11.5-30 Vdc9-30 Vdc10-15 Vdc
≤ ± 0.15%(> 200psi)≤ ± 0.25% (≤ 200psi)
1/4” NPT Female
316L SS
10 oz (284 g)
Fuel tank levelChemical tank levelGas compressorsChemical
processingHazardous
locations
HART features:- 10:1 rangeability- remote config.- multi-drop networkAll 316L SS
construction 1.5” diameterSubmersible
0-3 thru 0-5000 psig/s0-15 thru 0-500 psia0-15 psiv
0-0.2 thru 0-350barg/s0-1 thru 0 35 bara0-1 barv
4-20 mA HARTDigital signal
11.5-30 Vdc
≤ ± 0.10%
1/4” NPT Female
316L SS
24 oz (680 g)
GOST. NEPSI
Chemical processing
Oil and gasPolymer plantsHazardous
locations
HART features:- 10:1 rangeability- remote config.- multi-drop networkNAMUROutput sent directly
to DCS or PLCImproved frequency
response
0-5 thru0-72,500 psis/g/a
0-0.35 thru 0-5000 barg/s/a
4-20 mA HARTDigital signal
16-30 Vdc
2281: ≤ ± 0.25%2280: ≤ ± 0.5%
Application specific
15-5 PH SS17-4 PH SS
24 oz (680 g)
Chemical processing
Oil and gasPolymer plantsHazardous locations
Foundation FieldBusEasy hand-held
configurationOutput sent directly
to DCS or PLCImproved frequency
response
0-5 thru0-72,500 psis/g/a
0-0.35 thru 0-5000 barg/s/a
FOUNDATION FieldBus H1
9-24 Vdc
2281: ≤ ± 0.25%2280: ≤ ± 0.5%
Application specific
15-5 PH SS17-4 PH SS
24 oz (680 g)
SlurriesChemical
processingPulp and paperPolymer plants
Flush diaphragmZero volume
pressure portEasy set-upInternal calibration
shunt
0-15 thru 0-10,000 psig
0-1 thru0-700 barg
3 mV/V
10 Vdc
≤ ± 0.5%
3/4”-16 UNF-3A
17-4 PH SS
5 oz (142 g)
General purposeTest standsDynosHigh volume usage
CANopen availableEasy set-up via
directional BUS communications
SST constructionFlush sensor modelHigh accuracy
0-300 thru 0-15,000 psig
0-20 thru0-1,000 barg
3 mV/V0-5 (1-6) Vdc0-10 (1-11) Vdc4-20 mACANopen
10 Vdc10-32 Vdc15-32 Vdc10-36 Vdc18-32 Vdc
≤ ± 0.25%
Int. ISO 2281/1-G1/4Ext. DIN 3852-AG1/4AFlush M18x1.5
15-5 PH SS
5 oz (142 g)
General industrialHydraulicsPneumaticsCompressorsOff-road vehicleWater treatment
Low costSmall sizeEnvironmentally
sealedHigh cycle life
(1,000,000 cycles)Shock resistantStainless steel
construction
0-100 thru0-15,000 psig
0-7 thru0-1,400 barg
0-5 (0-10) Vdc 4-20 mA
10-30 Vdc
≤ ± 0.65%
1/4” NPT Female
15-5 PH SS
10 oz (284 g)
Hostile environments
Test standsDynosControl systemsDie casting
Stainless steel construction
Spike resistant High accuracyHigh cycle lifePrecise pressure
measurementDeviceNET
availableAll pressure ranges
0-15 thru0-10,000 psig
0-1 thru0-700 barg
3 mV/V0-5 (1-6) Vdc0-10 (1-11) Vdc4-20 mADeviceNet
10 Vdc10-36 Vdc14-36 Vdc12-36 Vdc11-25 Vdc
≤ ± 0.25%
1/4” NPT Male
15-5 PH SS
8 oz (227 g)
Test standsMetrologyLaboratory/ResearchAutomotive test
systemsSemiconductorsCaliper testingDynos
≤ ± 0.05% linearityDigitally
compensatedSmall sizeFast responseRFI/EMI protectedExternal adjustments Stainless steel
constructionMultiple connector,
port, perf. options
0-2 thru 0-100,000 psig/a0-15 psiv
0-0.14 thru 0-7,000 barg/s/a0-1 barv
0-5 (0-10) Vdc4-20 mA
9-30 (13-30) Vdc9-30 Vdc
≤ ± 0.05% (≤ 5Kpsi)≤ ± 0.15% (> 5Kpsi)
1/4” NPT Female
316L SST ≤ 5K psi15-5 ≥ 5K-15K psiPH 13-8 Mo SS ≥ 20K psi
15 oz (425 g)
APPROVALS
APPLICATIONS
FEATURESBENEFITS
STANDARD PSIRANGESAvailable in: MPa,kgf/cm2, et al
STANDARD BARRANGES
FULL SCALE OUTPUT(FSO)
NOMINAL INPUTVOLTAGES
ACCURACY[COMBINEDERROR]
STANDARDPRESSURECONNECTION
STANDARD WETTEDPARTS
WEIGHT
oil, gas and petrochemical industrial test and control
509 pt 332 570 | 770 | 870 970 571 572 548 | 748 | 848 948 spx ffx pt 311 ida series 243 | 343 270 245 | 345model
Challenge Our Engineering, Manufacturing and Sales Team with your pressure or level application. We can solve it!
(available)
Test standsJet EngineBrake HydraulicPumps/Compressors
Top mounted, sealed externaladjustments
Stainless steel construction
High accuracyInternal calibration
circuit≤ ± 0.05% linearity
available
0-2 thru 0-100K psig/a0-15 psiv
0-0.14 thru0-7,000 barg/s/a0-1 barv
0-5 (0-10) Vdc4-20 mA
9-40 (12-28) Vdc9-40 Vdc
≤ ± 0.10% (≤ 5K psi)≤ ± 0.15% (> 5K psi)
1/4” NPT Female0-15K psiHigh pressure Tube20K-100K psi
304, 316L SS < 5K psi15-5 PH SS 5K -15K psiPH 13-8 Mo SS ≥ 20K psi
15 oz (425 g)
Hydraulic and pneumatic systems
Injection moldingOre trucksCranes
Long life, low costSpike and corrosion
resistantQuick calibrationWithstands severe
environmentsTemp compensatedSurface mount
technology
0-15 thru0-10,000 psig
0-1 thru0-700 barg
3 mV/V0-5 (1-6) Vdc0-10 (1-11) Vdc4-20 mA
10 Vdc11-32 Vdc16-32 Vdc14-36 Vdc
≤ ± 0.50%
1/8” NPT Female
15-5 PH SS
5 oz (142 g)
Test standsDynamometersRoad test systemsBrake test stands
< 2.5” H, 1”DTemps to 285°FPressure/vacuum
serviceAll welded SSTWestern regional
wiring code option
0-15 thru 0-10,000 psig
0-1 thru0-700 barg
3 mV/V
10 Vdc
≤ ± 0.50%
1/8” NPT Female
15-5 PH SS
5 oz (142 g)
Die castingStamping pressesRolling millsHydraulic systemsTest stands
3X overpressureStainless steel
construction< 1 millisecond
response timeMultiple connector,
port, performance options available
0-3 thru 0-15,000 psig 0-200 psia0-15 psiv
0-0.2 thru0-1,000 barg0-14 bara0-1 barv
2.5-10 mV/V0-5 (0-10) Vdc4-20 mA
10-15 Vdc9-30 (12-30) Vdc9-30 Vdc
≤ ± 0.15% (> 200 psi)≤ ± 0.25% (≤ 200 psi)
1/4” NPT Female
304,316 L SST15-5 PH SS
10 oz (284 g)
Automotive test stands
AerospaceMilitaryGeneral industrialHydraulic systems
All welded SST≤ ± 0.5%/100°F
temperature performance
Internal calibration circuit
Easy set-upField proven
technologyExternal zero and
span adjustments
0-5 thru 0-30,000 psig/s/a0-15 psiv
0-0.35 thru0-2,000 barg/s/a0-1 barv
3 mV/V0-5 Vdc0-10 Vdc
10 Vdc24-32 Vdc24-32 Vdc
8X2: ≤ ± 0.15%8X1: ≤ ± 0.25%8X0: ≤ ± 0.50%
1/4” NPT Female
17-4 PH SS15-5 PH SS
13-17 oz (369-482 g)
Leak testEngine test standsAutoclavesWind tunnels
Fast response1,000 psid
overpressure 3,000 psid optional
Low range wet/wet DP
mV/V output availableHastelloy wetted
parts available
0-0.5” WCD thru0-3.000 psidLine Pressure: 1,000 psi
0-5” WCD thru0-7 bardLine Pressure: 70 bar
0-5 (0-10) Vdc4-20 mA
10-42 (15-45) Vdc10-42 Vdc
≤ ± 0.20%
1/4” NPT Female
316 L SSViton® O-ring
56 oz (1.6 kg)
WastewaterNatural gas
processingFood processingShipboard/Marine
HART DP30:1 rangingPush button
configuration and calibration
Local digital indication
Exotic wetted materials available
0-5” WCD thru0-300 psid
0-5” WCD thru0-20 bard
1-5 Vdc4-20 mA4-20 mA HART Digital Signal
9-15.5 Vdc11.5-42 Vdc17-42 Vdc
≤ ± 0.20% maximum
Application specific (Remote seals shown)
316L SS
12 lbs (5.4 kg)
Reservoirs/DamsGround water wellsEPA plant studiesChemical
processingShipboard/Marine
0.87” diameter316L SS constructionO-ring free designAll welded
transmitterIntegral atmospheric
reference tube
0-2 thru 0-500 psig(40” thru 1155”WC)
0-0.14 thru0-35 barg
4-20 mA
9-30 Vdc
≤ ± 0.10%(≤ ± 0.25% max)
5/8” - 18 UNF Female
316L SSTefzel or Polyurethane
10 oz (284 g)
Dairy/Food/BeveragePharmaceutical/
BiotechnologyBalance tanksSilo tanks
Less than 1 minute CIP/SIP recovery
Flush Hastelloy diaphragm
316L SS, NEMA 4X housing
3:1 rangingZero and Span
adjustOptional display
0-30” thru 0-750” WCG
0-30” WCG thru0-2 barg
4-20 mA4-20 mA HART Digital Signal
9-30 Vdc (14-30 with display)11.5-30 Vdc
360: ≤ ± 0.10%960: ≤ ± 0.15%
21 adapter types available
Hastelloy C-276
4 lbs. (1.8kg)
Sanitary tank levelBeverage
processingFood/Dairy
processingPharmaceutical
processing
Flush Hastelloy diaphragm
Unique Gortex breathing system
Less than 1 minute thermal recovery time
All welded SS construction
Zero and spanadjusts
0-30” WCG thru 0-500 psig0-15 thru 0-500 psia0-15 psiv
0-30” WCG thru0-35 barg0-1 thru 0 - 35 bara0-1 barv
4-20 mA
9-30 Vdc
≤ ± 0.25%
1-1/2” or 2” Tri-Clamp
Hastelloy C-276
16 oz (454 g)
DairyFood/BeveragePharmaceutical/
BiotechnologyBalance/Silo tanks
Standard Hastelloy C-276 diaphragm
Accessible electrical conduit connection design
Optional LED displayZero and Span
adjusts Eliminates daily
drift issue
0-3 thru 0-500 psig0-15 thru 0-500 psia0-15 psiv
0-0.2 thru 0-35 barg0-1 thru 35 bara0-1 barv
4-20 mA4-20 mA HART Digital Signal
9-30 Vdc (14-30 with display)11.5-30 Vdc
364: ≤ ± 0.25%964: ≤ ± 0.25%
1-1/2” or 2” Tri-Clamp
Hastelloy C-276
40 oz (1.1 kg)
PharmaceuticalFood/BeverageDairyPaintConfections
316L SS constructionNo oil fillFlush sensorCIP/SIP designExotic material
wetted parts available
Magnetically coupled external controls (351)
5:1 ranging (351)
350: 0-100 thru 0-1000 psis/a351: 0-100, 400, 1000 psis/a
350: 0-7 thru0-70 barg/s/a351: 0-7, 28, 70barg/s/a
4-20 mA
350: 10-36 Vdc351: 9.5-40 Vdc
≤ ± 0.65%
1”, 1-1/2”, 2”, 2-1/2” Tri-Clamp
316L SS
350: 16 oz (454 g)351: 30 oz (850 g)
PharmaceuticalMedicalFoodDairyIndustrial
Easy set-upMetal to metal sealFlush diaphragmZero volume
pressure port
0-1,000 thru 0-30,000 psig
0-70 thru0-2,000 barg
3 mV/V4-20 mA
10 Vdc16-30 Vdc
≤ ± 0.50%
3/4” – 16 UNF – 2B
Inconel 718
8 oz (227 g)
industrial test and control sanitary, food and medical
idp10274 | 374800 series148 | 248 | 348pt 139249 | 349100 series
HydraulicsPneumaticsTest systemsPumps/CompressorsMiningOff-road vehiclesWater treatment
plants
DIN connector standard
Spike resistantHigh cycle lifeStainless steel
constructionExternal zero adjust
0-5 thru 0-15,000 psig0-10 thru 0-100 psia0-15 psiv
0-0.35 thru0-1,000 barg0-0.7 thru 0 - 7 bara0-1 barv
0-5 (0-10) Vdc4-20 mA
10-40 (15-40) Vdc10-40 Vdc
≤ ± 0.60%
1/4” NPT Female
316L SSTBuna-N O-ring0-200 psi
10 oz (284 g)
247 | 347 517 | ww517 360 | 960 363 364 | 964 350 | 351 pt 375
APPROVALS
APPLICATIONS
FEA TURES
BENEFITS
STANDARD PSIRANGESAvailable in: MPa,kgf/cm2, et al
STANDARD BARRANGES
FULL SCALE OUTPUT(FSO)
NOMINAL INPUTVOLTAGES
ACCURACY[COMBINEDERROR]
STANDARDPRESSURECONNECTION
STANDARD WETTEDPARTS
WEIGHT
APPROVALS
APPLICATIONS
FEATURESBENEFITS
STANDARD PSIRANGESAvailable in: MPa,kgf/cm2, et al
STANDARD BARRANGES
FULL SCALE OUTPUT(FSO)
NOMINAL INPUTVOLTAGES
ACCURACY[COMBINEDERROR]
STANDARDPRESSURECONNECTION
STANDARD WETTEDPARTS
WEIGHT
water and wastewater
This information is accurate to the best of the manufacturer’s knowledge, however, we reserve the right to change specifications at any time.
We can solve it!
Acidizing
Altitude Chambers
Ammunition Tests
Automotive Paint Booths
Bio Pharmaceuticals
Ballast Systems
Ballast Tanks
Boring Machines
Boiler Control
Burst Tests
Bottling Machines
Brake Line Test
Catalytic Converters
Cooling Towers
Compressor Surge
Coiled Tubing
Die Cast Machines
Conveyor Systems
Compactors/Boilers
Dough Separation
Dairy Bubblers
Environmental Chambers
Emission Sampling
Exhaust Systems
Filter Tests
Extrusion
Foundries
Flight Simulators
Furnace Control
Fuel Test
Groundwater Monitoring
Gas Wells
HVAC Systems
Heat Exchangers
Heating/Air Conditioning
Leak Test
HTST Balance Tanks
Irrigation Systems
Methane Extraction
Hydraulic Cylinders
Lake Levels
Milk Processing
Injection Molding
Lift Stations
Pump Control
Meter Calibration
Locomotive Boilers
Purified Water
Missile Systems
Meat Processing
Reservoir Level
Nitrogen Blankets
Metrology
Semiconductor Polishing
Paper Winding
Mine Roof Hydraulics
Stamping Presses
Power Generation
Mobile Hydraulics
Steering Systems
Rig Safety
MWD
Sterilizers
Rocket Turbines
Pipe Lines
Tablet Presses
Sewage Systems
Polymer Reactors
Textile Mills
Silo Level
Recycling Equipment
Truck Assembly
Space Probes
Refrigeration Systems
Valve Control
Steel Rolling Mills
Reverse Osmosis
Water Filtration Systems
Subsea
Transmission Test
Well Cementing
Tire Testing
Wind Tunnels
Wet Wells
applications
Challenge our Engineering, Manufacturing and Sales Team with your pressure or level application.
For over 50 years Dynisco Instruments
and Viatran Corporation have been solving
pressure and level measurement problems
in the some of the toughest application
environments - highly corrosive media,
damaging cyclic pressures, severe shock and
vibration. Our transducers and transmit-
ters are an integral part of the industrial
world, providing superior performance and
dependable pressure data. Choosing the
right product for each application is critical.
We have designed pressure sensors for
thousands of industrial and process
applications. All are available with
special pressure fittings, various electrical
terminations and corrosion resistant alloys.
Our sensors are renown for their rugged,
hermetic, all stainless design featuring a
complete array of industry approvals and
quality certifications.
To insure the highest performing solution,
we feature bonded foil strain gage, silicon
piezoresistive, ceramic and variable capaci-
tance sensing technologies to best suit each
application. Pressure ranges from draft
range to 100,000 PSI, with millivolt, voltage,
analog and digital outputs address every
customer’s instrument requirements.
We demonstrate the unique ability to
modify a transmitter at a standard cost
to meet the customer’s special needs.
Sensor sizing, electrical and process
connections, media compatibility, accuracy
and temperature performance is often
tailored to each customer and has truly
established our company as a
“Measurement Solutions Leader” in
many markets: Test, Fluid Power, Process,
Medical, Sanitary, and Oil & Gas.
COMPLETE PRE SSURE and LEVEL MEA SUREMENT
Viatran3829 Forest Parkway Ste 500Wheatfield, NY 14120USA
Phone +1 716 629 3800Fax +1 716 693 9162Email solutions@viatran.comwww.viatran.com
Note:Products Marked as Legacy are no longer available from Viatran.For replacements, please contact Dynisco directly at:1 800-DYNISCO (800-396-4726)
Recommended