View
245
Download
0
Category
Preview:
Citation preview
CA DB2 Tools 18.0 1
CA RS 1511 Service ListCA DB2 Tools 18.0 1
CA RS 1511 Service List
Release Service Description Type
18.0 RO84716 TBL ROW QUERY # OF ROWS TRUNCATED GE BILLION PTF
RO84770 S0C4 IN DETECTOR WHEN HIST-ACCT-DETAIL=PDTSQL SPECIFIED PTF
RO84905 MISSING AND OBSOLETE FIELDS IN THE DB2 ARCHIVE TABLES PTF
RO84960 DT511I WHEN VIEWING DS GROUP CURRENT PACKAGE/DBRM DATA PTF
RO84979 HIGH CPU UTILIZATION FOR EXCP0258 AND EXCP0376 PTF
RO84989 NO DATA OR BLANK OUTPUT ON SOME SCREENS PTF
RO84997 PREV/NEXT ON THREAD HISTORY SHOWS A BLANK SCREEN PTF
RO85014 S0C1 AFTER SQLCODE -911 PTF
RO85015 S0C1 AFTER SQLCODE -911 PTF
RO85016 WRONG TABLE ACCESS OCCURS IN THE SQL TABLE ACTIVITY DISPLAY PTF
RO85033 SY REPORTS SHOWING EX OPTION IN HELP PTF
RO85034 SY REPORTS SHOWING EX OPTION IN HELP PTF
RO85037 FAILURE MAKING INCREMENTAL COPY FOR 1G PARTITIONED UTS PTF
RO85044 EXTRA BLANK LINE IN TABLE OBJECT DEPENDENCY PTF
RO85046 SC-R REPORT DOES NOT SHOW VERSION OF ROUTINE PTF
RO85047 .CONNECT KEYWORD MISSING USING DDL/HDDL COMMAND & REMOTE LOC PTF
RO85050 RESERVE OBID ANALYSIS OPTION IS IGNORED. PTF
RO85071 RQE00837 MESSAGE MISSING IN BATCH MODE FOR SY-Z/SY-D REPORTS PTF
RO85092 PP023E: INTERNAL ERROR IN PZA#STK1 PTF
RO85107 ADDITIONAL ERROR LOGIC WHEN READING PRODUCT PARMLIB MEMBERS PTF
RO85115 BATCH CMD IN IDENTIFY PROBLEM SQL GETS PPPPBPM PANEL ERROR PTF
RO85120 S0C1 ABEND IN UTLGLIOE OFFSET +19C PTF
RO85171 S438 ABEND IN UTLGLRI2 PTF
RO85172 S438 ABEND IN UTLGLRI2 PTF
RO85182 IDB2ACCT DB2-CPU VALUE INCORRECT PTF
RO85200 PTATOKE SQLDA C AND C++ SUPPORT PTF
RO85222 DA CRITICAL EXTENDED CREATES NON RECOVERABLE ICS FOR PFR PTF
RO85223 DA CRITICAL EXTENDED CREATES NON RECOVERABLE ICS FOR PFR PTF
RO85226 APPLY RO80595 FAILS WITHOUT DETECTOR ** PRP **
RO85228 INCORRECT ENQ RNAME OF D PTF
RO85247 INVALID DATABASE NAME ON SQL TRACE DISPLAY WITH DB2 11 PTF
RO85252 GRAPHIHC/VARGRAPHIC DATA TRUNCATION IN FORM MODE PTF
RO85259 DC-GROUP SYSPARM NOT OVERRIDDEN BY LAST OCCURRENCE IN FILE PTF
RO85263 VARIABLE FORMAT DUMMY ROWID COLUMN FAILS TO LOAD PTF
RO85287 COPY USER PROFILE DURING PRFCNVRT SQL -803 PTF
RO85294 ZLB0002E DICTIONARY SEQUENTIAL ORDER REBUILD INDEX(ALL) PTF
RO85331 XNET ABEND S0C3 PXNMGXNT IXNTACAG WITH OFA SCALABILITY ** PRP **
RO85332 SQLCODE -303 WHEN USING UTILITY OPTION STATS -> 'S' PTF
RO85342 RU678E ERROR ON BROWSE OF SYSTRIGGERS PTF
RO85385 BROKEN PAGE AFTER PFL ON PARTITION V11 BIGTAIL **HIPER**
RO85386 BROKEN PAGE AFTER PFL ON PARTITION V11 BIGTAIL **HIPER**
RO85391 ONLINE HELP MISSING FOR INTERVAL OPTION PTF
RO85395 ABEND S0C4 NGRABPC0 AMXSSXC0 AFTER EDB CONTROL BLOCK CHANGE PTF
RO85397 RCM0179W WHEN LRSN/RBA UPDATE ALL PAGES IN SAME SUBSYSTEM PTF
RO85418 SYSTEM_TIME COLUMN ATTRIBUTES MISSING FROM ALTER TABLE DDL PTF
RO85435 DB2 00C20110 ERROR AFTER PBG TABLESPACE REORG PTF
RO85441 INV RETCDE FROM -DISP DB DURING STRATEGY ANALYSIS PTF
RO85468 PARTIAL ITE$STCK CAUSES DATA LOSS PTF
RO85474 TRUNCATED VPSIZE DATA IN BP-DS REPORT PTF
RO85481 LBIND/LREBIND COMMANDS NOT SUPPORTED IN DB2 V10 CM8 MODE PTF
RO85521 INACCURATE CPU TIMES/STALE ZIIP TIMES FOR DISTRIBUTED THREAD PTF
RO85522 INACCURATE CPU TIMES/STALE ZIIP TIMES FOR DISTRIBUTED THREAD PTF
RO85527 SPECIAL CHARACTERS ARE NOT DISPLAYED IN EDIT OR BROWSE PTF
RO85529 MESSAGES SCREEN IS HORIZONTALLY TRUNCATED ** PRP **
RO85561 EXPLAIN FAILS WITH SQL299 PTF
RO85565 PRR2251E INDEX DELETE ERROR PTF
CA DB2 Tools 18.0 2
CA RS 1511 Service List
Release Service Description Type
RO85566 PRR2251E INDEX DELETE ERROR PTF
RO85569 INVALID OPTIONS GENERATED FOR PLAN LBIND & LREBIND PTF
RO85581 S0C4 DURING ONLINE EXTENDED EXTRACT PTF
RO85582 ERROR ON USING OPTION I ON XO IN COMMAND CENTER PTF
RO85583 ERROR DURING SQL LOAD PTF
RO85584 U0047 FOLLOWED BY SC03 IN EXTENDED EXTRACT SQL DELETE PTF
RO85594 TEMPORAL TABLE DROPPED AND CREATED WHEN RENAMING A COLUMN PTF
RO85604 COLLECTION TERMINATES AFTER 0C4 IN DT$DII PTF
RO85607 RQ078E WITH FLDSTAT LINE COMMAND ON THE C-D REPORT PTF
RO85608 RQ078E WITH FLDSTAT LINE COMMAND ON THE C-D REPORT PTF
RO85614 ABEND S138 FOLLOWING ERROR IN HISTORY FILE INITIALIZATION PTF
RO85626 S0C4 S0C6 NO ACTIVE MODULE AFTER SUCCESSFUL LOAD PTF
RO85627 S0C4 S0C6 NO ACTIVE MODULE AFTER SUCCESSFUL LOAD PTF
RO85634 SEMICOLON MISSING IN ALTER TABLESPACE DDL TO CHANGE LOCKPART PTF
RO85637 OBJECT IDENTIFICATION MESSAGE PFL0747I PTF
RO85640 INCORRECT DATA REPORTED FOR IFCIDS WITH REPEATING SECTIONS PTF
RO85654 FALSE ALTER TABLE ADD COLUMN ENTRY IN DDL REPORT OR SQL PTF
RO85665 RM005E HELP PANEL DOES NOT SAY REGION SIZE BEING SMALL. PTF
RO85679 RC=16 ON COPY WHEN SHRLVL NS/R AND SSID DIFFERENT DB2 VERSIO PTF
RO85686 PSABATCH UNLOAD CAUSES DATASTORE COMPATIBILITY ERROR PTF
RO85696 CMG999 - RM632E MESSAGE NOT FOUND IN 'ISPMLIB' LIBRARY PTF
RO85707 PBG GROWING ABEND S13E PUT9807E RC 8 RSN 02000000 PTF
RO85708 PBG GROWING ABEND S13E PUT9807E RC 8 RSN 02000000 PTF
RO85709 PBG GROWING ABEND S13E PUT9807E RC 8 RSN 02000000 PTF
RO85710 DROP & ADD VERSIONING GENERATED WHEN TEMPORAL TBLS COMPARED PTF
RO85734 PFR0688E WHEN ONE TABLE IN TABLE SPACE PTF
RO85758 IDB2UIFI DBG73106E FILE ALREADY LOADED WHEN FILE IS EMPTY ** PRP **
RO85759 NO DATA SCREEN AFTER PICK WITH INVALID SSID PTF
RO85821 DYN_TEXT_TOKEN IN PDT_STANTEXT TABLE CONTAINS SPACES PTF
RO85854 PFR0221E EXISTING OBID FOUND WITHOUT NEW OBID PTF
RO85856 COLUMN FILTERS CANNOT BE TURNED ON PTF
RO85859 VERSION MISMATCH BETWEEN BSDS AND DB2 RELEASE PTF
RO85894 ONE CHARACTER CREATOR OR OBJECT ISSUE/S0C1/SQL -311 PTF
RO85922 SQL ERROR WHEN UPDATING A TABLE WITH VARYING LENGTH IX NAMES PTF
RO85926 ENH: PAD SAAS UNLOAD PTF
RO85941 ABEND S0C4 IN UTL#SYM WHEN USING TEMPLATE TO ALLOCATE COPIES PTF
RO85943 EXECUTION ALTER TABLE FAILS WITH SQLCODE -20385 PTF
RO85958 LBIND/LREBIND ON PLAN OR PACKAGE FAILS WITH S0C4 PTF
RO85972 BROKEN PAGE AFTER PRR ON PARTITION V11 BIGTAIL PTF
The CA RS 1511 service count for this release is 95
CA DB2 Tools 3
CA RS 1511 Service List for CIDBI00CA DB2 Tools 3
CA RS 1511 Service List for CIDBI00
FMID Service Description Type
CIDBI00 RO84770 S0C4 IN DETECTOR WHEN HIST-ACCT-DETAIL=PDTSQL SPECIFIED PTF
RO84905 MISSING AND OBSOLETE FIELDS IN THE DB2 ARCHIVE TABLES PTF
RO84979 HIGH CPU UTILIZATION FOR EXCP0258 AND EXCP0376 PTF
RO84989 NO DATA OR BLANK OUTPUT ON SOME SCREENS PTF
RO84997 PREV/NEXT ON THREAD HISTORY SHOWS A BLANK SCREEN PTF
RO85182 IDB2ACCT DB2-CPU VALUE INCORRECT PTF
RO85259 DC-GROUP SYSPARM NOT OVERRIDDEN BY LAST OCCURRENCE IN FILE PTF
RO85395 ABEND S0C4 NGRABPC0 AMXSSXC0 AFTER EDB CONTROL BLOCK CHANGE PTF
RO85529 MESSAGES SCREEN IS HORIZONTALLY TRUNCATED ** PRP **
RO85614 ABEND S138 FOLLOWING ERROR IN HISTORY FILE INITIALIZATION PTF
RO85640 INCORRECT DATA REPORTED FOR IFCIDS WITH REPEATING SECTIONS PTF
RO85758 IDB2UIFI DBG73106E FILE ALREADY LOADED WHEN FILE IS EMPTY ** PRP **
RO85759 NO DATA SCREEN AFTER PICK WITH INVALID SSID PTF
RO85856 COLUMN FILTERS CANNOT BE TURNED ON PTF
The CA RS 1511 service count for this FMID is 14
CA DB2 Tools 4
CA RS 1511 Service List for CINSI00CA DB2 Tools 4
CA RS 1511 Service List for CINSI00
FMID Service Description Type
CINSI00 RO85033 SY REPORTS SHOWING EX OPTION IN HELP PTF
RO85047 .CONNECT KEYWORD MISSING USING DDL/HDDL COMMAND & REMOTE LOC PTF
RO85050 RESERVE OBID ANALYSIS OPTION IS IGNORED. PTF
RO85092 PP023E: INTERNAL ERROR IN PZA#STK1 PTF
RO85107 ADDITIONAL ERROR LOGIC WHEN READING PRODUCT PARMLIB MEMBERS PTF
RO85200 PTATOKE SQLDA C AND C++ SUPPORT PTF
RO85226 APPLY RO80595 FAILS WITHOUT DETECTOR ** PRP **
RO85228 INCORRECT ENQ RNAME OF D PTF
RO85332 SQLCODE -303 WHEN USING UTILITY OPTION STATS -> 'S' PTF
RO85397 RCM0179W WHEN LRSN/RBA UPDATE ALL PAGES IN SAME SUBSYSTEM PTF
RO85418 SYSTEM_TIME COLUMN ATTRIBUTES MISSING FROM ALTER TABLE DDL PTF
RO85481 LBIND/LREBIND COMMANDS NOT SUPPORTED IN DB2 V10 CM8 MODE PTF
RO85521 INACCURATE CPU TIMES/STALE ZIIP TIMES FOR DISTRIBUTED THREAD PTF
RO85561 EXPLAIN FAILS WITH SQL299 PTF
RO85569 INVALID OPTIONS GENERATED FOR PLAN LBIND & LREBIND PTF
RO85594 TEMPORAL TABLE DROPPED AND CREATED WHEN RENAMING A COLUMN PTF
RO85607 RQ078E WITH FLDSTAT LINE COMMAND ON THE C-D REPORT PTF
RO85634 SEMICOLON MISSING IN ALTER TABLESPACE DDL TO CHANGE LOCKPART PTF
RO85679 RC=16 ON COPY WHEN SHRLVL NS/R AND SSID DIFFERENT DB2 VERSIO PTF
RO85696 CMG999 - RM632E MESSAGE NOT FOUND IN 'ISPMLIB' LIBRARY PTF
RO85710 DROP & ADD VERSIONING GENERATED WHEN TEMPORAL TBLS COMPARED PTF
RO85894 ONE CHARACTER CREATOR OR OBJECT ISSUE/S0C1/SQL -311 PTF
RO85926 ENH: PAD SAAS UNLOAD PTF
RO85943 EXECUTION ALTER TABLE FAILS WITH SQLCODE -20385 PTF
RO85958 LBIND/LREBIND ON PLAN OR PACKAGE FAILS WITH S0C4 PTF
The CA RS 1511 service count for this FMID is 25
CA DB2 Tools 5
CA RS 1511 Service List for CPDAI00CA DB2 Tools 5
CA RS 1511 Service List for CPDAI00
FMID Service Description Type
CPDAI00 RO84716 TBL ROW QUERY # OF ROWS TRUNCATED GE BILLION PTF
The CA RS 1511 service count for this FMID is 1
CA DB2 Tools 6
CA RS 1511 Service List for CPDTI00CA DB2 Tools 6
CA RS 1511 Service List for CPDTI00
FMID Service Description Type
CPDTI00 RO84960 DT511I WHEN VIEWING DS GROUP CURRENT PACKAGE/DBRM DATA PTF
RO85016 WRONG TABLE ACCESS OCCURS IN THE SQL TABLE ACTIVITY DISPLAY PTF
RO85247 INVALID DATABASE NAME ON SQL TRACE DISPLAY WITH DB2 11 PTF
RO85468 PARTIAL ITE$STCK CAUSES DATA LOSS PTF
RO85522 INACCURATE CPU TIMES/STALE ZIIP TIMES FOR DISTRIBUTED THREAD PTF
RO85604 COLLECTION TERMINATES AFTER 0C4 IN DT$DII PTF
RO85821 DYN_TEXT_TOKEN IN PDT_STANTEXT TABLE CONTAINS SPACES PTF
The CA RS 1511 service count for this FMID is 7
CA DB2 Tools 7
CA RS 1511 Service List for CPFLI00CA DB2 Tools 7
CA RS 1511 Service List for CPFLI00
FMID Service Description Type
CPFLI00 RO85014 S0C1 AFTER SQLCODE -911 PTF
RO85171 S438 ABEND IN UTLGLRI2 PTF
RO85263 VARIABLE FORMAT DUMMY ROWID COLUMN FAILS TO LOAD PTF
RO85385 BROKEN PAGE AFTER PFL ON PARTITION V11 BIGTAIL **HIPER**
RO85626 S0C4 S0C6 NO ACTIVE MODULE AFTER SUCCESSFUL LOAD PTF
RO85637 OBJECT IDENTIFICATION MESSAGE PFL0747I PTF
RO85707 PBG GROWING ABEND S13E PUT9807E RC 8 RSN 02000000 PTF
RO85922 SQL ERROR WHEN UPDATING A TABLE WITH VARYING LENGTH IX NAMES PTF
The CA RS 1511 service count for this FMID is 8
CA DB2 Tools 8
CA RS 1511 Service List for CPFUI00CA DB2 Tools 8
CA RS 1511 Service List for CPFUI00
FMID Service Description Type
CPFUI00 RO85708 PBG GROWING ABEND S13E PUT9807E RC 8 RSN 02000000 PTF
The CA RS 1511 service count for this FMID is 1
CA DB2 Tools 9
CA RS 1511 Service List for CPLAI00CA DB2 Tools 9
CA RS 1511 Service List for CPLAI00
FMID Service Description Type
CPLAI00 RO85654 FALSE ALTER TABLE ADD COLUMN ENTRY IN DDL REPORT OR SQL PTF
The CA RS 1511 service count for this FMID is 1
CA DB2 Tools 10
CA RS 1511 Service List for CPPAI00CA DB2 Tools 10
CA RS 1511 Service List for CPPAI00
FMID Service Description Type
CPPAI00 RO85115 BATCH CMD IN IDENTIFY PROBLEM SQL GETS PPPPBPM PANEL ERROR PTF
The CA RS 1511 service count for this FMID is 1
CA DB2 Tools 11
CA RS 1511 Service List for CPRAI00CA DB2 Tools 11
CA RS 1511 Service List for CPRAI00
FMID Service Description Type
CPRAI00 RO85441 INV RETCDE FROM -DISP DB DURING STRATEGY ANALYSIS PTF
RO85859 VERSION MISMATCH BETWEEN BSDS AND DB2 RELEASE PTF
The CA RS 1511 service count for this FMID is 2
CA DB2 Tools 12
CA RS 1511 Service List for CPRFI00CA DB2 Tools 12
CA RS 1511 Service List for CPRFI00
FMID Service Description Type
CPRFI00 RO85287 COPY USER PROFILE DURING PRFCNVRT SQL -803 PTF
RO85391 ONLINE HELP MISSING FOR INTERVAL OPTION PTF
The CA RS 1511 service count for this FMID is 2
CA DB2 Tools 13
CA RS 1511 Service List for CPRRI00CA DB2 Tools 13
CA RS 1511 Service List for CPRRI00
FMID Service Description Type
CPRRI00 RO85120 S0C1 ABEND IN UTLGLIOE OFFSET +19C PTF
RO85222 DA CRITICAL EXTENDED CREATES NON RECOVERABLE ICS FOR PFR PTF
RO85435 DB2 00C20110 ERROR AFTER PBG TABLESPACE REORG PTF
RO85565 PRR2251E INDEX DELETE ERROR PTF
RO85972 BROKEN PAGE AFTER PRR ON PARTITION V11 BIGTAIL PTF
The CA RS 1511 service count for this FMID is 5
CA DB2 Tools 14
CA RS 1511 Service List for CPSAI00CA DB2 Tools 14
CA RS 1511 Service List for CPSAI00
FMID Service Description Type
CPSAI00 RO85686 PSABATCH UNLOAD CAUSES DATASTORE COMPATIBILITY ERROR PTF
The CA RS 1511 service count for this FMID is 1
CA DB2 Tools 15
CA RS 1511 Service List for CPUTI00CA DB2 Tools 15
CA RS 1511 Service List for CPUTI00
FMID Service Description Type
CPUTI00 RO85015 S0C1 AFTER SQLCODE -911 PTF
RO85172 S438 ABEND IN UTLGLRI2 PTF
RO85223 DA CRITICAL EXTENDED CREATES NON RECOVERABLE ICS FOR PFR PTF
RO85386 BROKEN PAGE AFTER PFL ON PARTITION V11 BIGTAIL **HIPER**
RO85566 PRR2251E INDEX DELETE ERROR PTF
RO85627 S0C4 S0C6 NO ACTIVE MODULE AFTER SUCCESSFUL LOAD PTF
RO85709 PBG GROWING ABEND S13E PUT9807E RC 8 RSN 02000000 PTF
RO85941 ABEND S0C4 IN UTL#SYM WHEN USING TEMPLATE TO ALLOCATE COPIES PTF
The CA RS 1511 service count for this FMID is 8
CA DB2 Tools 16
CA RS 1511 Service List for CPXNI00CA DB2 Tools 16
CA RS 1511 Service List for CPXNI00
FMID Service Description Type
CPXNI00 RO85331 XNET ABEND S0C3 PXNMGXNT IXNTACAG WITH OFA SCALABILITY ** PRP **
The CA RS 1511 service count for this FMID is 1
CA DB2 Tools 17
CA RS 1511 Service List for CRCMI00CA DB2 Tools 17
CA RS 1511 Service List for CRCMI00
FMID Service Description Type
CRCMI00 RO85665 RM005E HELP PANEL DOES NOT SAY REGION SIZE BEING SMALL. PTF
The CA RS 1511 service count for this FMID is 1
CA DB2 Tools 18
CA RS 1511 Service List for CRCQI00CA DB2 Tools 18
CA RS 1511 Service List for CRCQI00
FMID Service Description Type
CRCQI00 RO85034 SY REPORTS SHOWING EX OPTION IN HELP PTF
RO85044 EXTRA BLANK LINE IN TABLE OBJECT DEPENDENCY PTF
RO85046 SC-R REPORT DOES NOT SHOW VERSION OF ROUTINE PTF
RO85071 RQE00837 MESSAGE MISSING IN BATCH MODE FOR SY-Z/SY-D REPORTS PTF
RO85474 TRUNCATED VPSIZE DATA IN BP-DS REPORT PTF
RO85608 RQ078E WITH FLDSTAT LINE COMMAND ON THE C-D REPORT PTF
The CA RS 1511 service count for this FMID is 6
CA DB2 Tools 19
CA RS 1511 Service List for CRCUI00CA DB2 Tools 19
CA RS 1511 Service List for CRCUI00
FMID Service Description Type
CRCUI00 RO85252 GRAPHIHC/VARGRAPHIC DATA TRUNCATION IN FORM MODE PTF
RO85342 RU678E ERROR ON BROWSE OF SYSTRIGGERS PTF
RO85527 SPECIAL CHARACTERS ARE NOT DISPLAYED IN EDIT OR BROWSE PTF
The CA RS 1511 service count for this FMID is 3
CA DB2 Tools 20
CA RS 1511 Service List for CRCXI00CA DB2 Tools 20
CA RS 1511 Service List for CRCXI00
FMID Service Description Type
CRCXI00 RO85581 S0C4 DURING ONLINE EXTENDED EXTRACT PTF
RO85582 ERROR ON USING OPTION I ON XO IN COMMAND CENTER PTF
RO85583 ERROR DURING SQL LOAD PTF
RO85584 U0047 FOLLOWED BY SC03 IN EXTENDED EXTRACT SQL DELETE PTF
The CA RS 1511 service count for this FMID is 4
CA DB2 Tools 21
CA RS 1511 Service List for CUGRI00CA DB2 Tools 21
CA RS 1511 Service List for CUGRI00
FMID Service Description Type
CUGRI00 RO85037 FAILURE MAKING INCREMENTAL COPY FOR 1G PARTITIONED UTS PTF
RO85294 ZLB0002E DICTIONARY SEQUENTIAL ORDER REBUILD INDEX(ALL) PTF
RO85734 PFR0688E WHEN ONE TABLE IN TABLE SPACE PTF
RO85854 PFR0221E EXISTING OBID FOUND WITHOUT NEW OBID PTF
The CA RS 1511 service count for this FMID is 4
CA DB2 Tools 18.0 22
CA RS 1511 - PTF RO84716 DetailsCA DB2 Tools 18.0 22
CA RS 1511 - PTF RO84716 Details
Release Service Details18.0 RO84716 RO84716 M.C.S. ENTRIES = ++PTF (RO84716)
TBL ROW QUERY # OF ROWS TRUNCATED GE BILLION
PROBLEM DESCRIPTION:
CA Database Analyzer for DB2 for z/OS (PDA) online query report
TABLE ROW ANALYSIS will truncate the row count when the number of
rows reaches one billion.
SYMPTOMS:
Leftmost digit is missing from a row count of one billion or more.
IMPACT:
Row count is inaccurate for the TABLE ROW ANALYSIS report.
CIRCUMVENTION:
none
PRODUCT(S) AFFECTED:
CA Database Analyzer For DB2 for z/OS Version 18.0
CA Database Analyzer For DB2 for z/OS Version 19.0
Related Problem:
PDA 1291
Copyright (C) 2015 CA. All rights reserved. R01082-D180-SP1
DESC(TBL ROW QUERY # OF ROWS TRUNCATED GE BILLION).
++VER (Z038)
FMID (CPDAI00)
PRE ( RO75317 )
SUP ( TR84716 )
CA DB2 Tools 18.0 23
CA RS 1511 - PTF RO84770 DetailsCA DB2 Tools 18.0 23
CA RS 1511 - PTF RO84770 Details
Release Service Details18.0 RO84770 RO84770 M.C.S. ENTRIES = ++PTF (RO84770)
S0C4 IN DETECTOR WHEN HIST-ACCT-DETAIL=PDTSQL SPECIFIED
PROBLEM DESCRIPTION:
A CA Detector for DB2 for z/OS (PDT) collection can terminate abnormally
due to S0C4 abends when the HIST-ACCT-DETAIL=PDTSQL option is specified
in the parameters for a CA SYSVIEW Performance Management Option for DB2 for
z/OS (IDB2) data collector.
SYMPTOMS:
The following messages appear in the Xmanager log:
PDT0185 ABEND=S0C4 MODULE=*UNKNOWN* ADDRESS=...
PDT0102 DETECTOR TERM IN PROGRESS FOR DB2=ssid
PDT0730 DETECTOR TERM CLEANUP IN PROGRESS DB2=ssid
PDT0732 DETECTOR TERM CLEANUP COMPLETE DB2=ssid
PDT0103 DETECTOR TERM COMPLETE FOR DB2=ssid
IMPACT:
The PDT collection terminates and must be restarted manually.
CIRCUMVENTION:
Don't specify the HIST-ACCT-DETAIL=PDTSQL option in the parameters for the
IDB2 data collector.
PRODUCT(S) AFFECTED:
CA SYSVIEW Performance Management Option for DB2 for z/OS Release 19.0
CA SYSVIEW Performance Management Option for DB2 for z/OS Release 18.0
CA Detector for DB2 for z/OS Release 19.0
CA Detector for DB2 for z/OS Release 18.0
Related Problem:
IDB2 1883
Copyright (C) 2015 CA. All rights reserved. R01084-D180-SP1
DESC(S0C4 IN DETECTOR WHEN HIST-ACCT-DETAIL=PDTSQL SPECIFIED).
++VER (Z038)
FMID (CIDBI00)
PRE ( RO74129 RO74677 RO74879 RO75439 RO76367 RO76485
RO78961 )
SUP ( RO83216 TR82434 TR83216 TR84770 )
++HOLD (RO84770) SYSTEM FMID(CIDBI00)
REASON (ACTION ) DATE (15273)
COMMENT (
+----------------------------------------------------------------------+
| CA SYSVIEW Performance Management Option for DB2 for z/OS |
| Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | After Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | To make the new version of IDBPDTCC available to Xmanager.|
+----------+-----------------------------------------------------------+
|USERS |Users of the PDTSQL option of the HIST-ACCT-DETAIL sysparm |
|AFFECTED | |
+----------+-----------------------------------------------------------+
|KNOWLEDGE |SMP/E, IEBCOPY. |
|REQUIRED | |
+----------+-----------------------------------------------------------+
|ACCESS |Libary access to the product load libraries. |
|REQUIRED | |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
After application of this fix, the load module IDBPDTCC must be
copied to the Xmanager STEPLIB, and the Xmanager must be recycled,
in order for this fix to take effect if you use the PDTSQL option
of the HIST-ACCT-DETAIL sysparm.
).
CA DB2 Tools 18.0 24
CA RS 1511 - PTF RO84905 DetailsCA DB2 Tools 18.0 24
CA RS 1511 - PTF RO84905 Details
Release Service Details18.0 RO84905 RO84905 M.C.S. ENTRIES = ++PTF (RO84905)
MISSING AND OBSOLETE FIELDS IN THE DB2 ARCHIVE TABLES
PROBLEM DESCRIPTION:
CA SYSVIEW Performance Management Option for DB2 for z/OS (IDB2) NSIGMIGA
Archive Table Migration Utility does not include fields introduced in
release 18.0 and does not allow replacing obsolete DB2 fields by zero
fields.
SYMPTOMS:
Archive tables migrated to release 19.0 from release 16.0 or 17.0 with the
Archive Migration Utility will not contain fields introduced in 18.0.
The fields from non-supported DB2 releases are still referenced in the
archiving IQL requests when the archive tables are migrated to releases
18.0 or 19.0 using the Archive Table Migration Utility (NSIGMIGA).
IMPACT:
Missing and obsolete fields in the migrated archive tables.
CIRCUMVENTION:
Manually update archive tables DDL, load control statements and IQL requests
to include fields introduced in release 18.0 and replace obsolete fields in
IQL requests. Refer the documentation for the list of fields.
PRODUCT(S) AFFECTED:
CA SYSVIEW Performance Management Option for DB2 for z/OS Version 18.0
CA SYSVIEW Performance Management Option for DB2 for z/OS Version 19.0
Related Problem:
IDB2 1878
Copyright (C) 2015 CA. All rights reserved. R01094-D180-SP1
DESC(MISSING AND OBSOLETE FIELDS IN THE DB2 ARCHIVE TABLES).
++VER (Z038)
FMID (CIDBI00)
SUP ( RO73704 TR73704 TR84905 )
CA DB2 Tools 18.0 25
CA RS 1511 - PTF RO84960 DetailsCA DB2 Tools 18.0 25
CA RS 1511 - PTF RO84960 Details
Release Service Details18.0 RO84960 RO84960 M.C.S. ENTRIES = ++PTF (RO84960)
DT511I WHEN VIEWING DS GROUP CURRENT PACKAGE/DBRM DATA
PROBLEM DESCRIPTION:
CA Detector for DB2 for z/OS (PDT) may display a misleading
DT511I message and return no data when viewing the DS GROUP
CURRENT PACKAGE/DBRM DATA. The DT511I message appears when the
current interval is nowhere near being elapsed.
SYMPTOMS:
The following message appears
DT511I: Current collection interval has elapsed.
IMPACT:
No data is displayed and a misleading DT511I message is issued.
CIRCUMVENTION:
The expected information usually is displayed after a few subsequent
attempts.
PRODUCT(S) AFFECTED:
Detector Release 17.0
Detector Version 18.0
Detector Version 19.0
Related Problem:
PDT 1329
Copyright (C) 2015 CA. All rights reserved. R01097-D180-SP1
DESC(DT511I WHEN VIEWING DS GROUP CURRENT PACKAGE/DBRM DATA).
++VER (Z038)
FMID (CPDTI00)
PRE ( RO77329 )
SUP ( TR84960 )
++HOLD (RO84960) SYSTEM FMID(CPDTI00)
REASON (RESTART) DATE (15271)
COMMENT (
+----------------------------------------------------------------------+
| CA Detector for DB2 for z/OS Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | Before Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | Avoidance of module mismatch related errors in an Xmanager|
+----------+-----------------------------------------------------------+
|USERS | Collections of DB2 statistics via Detector or Subsystem |
|AFFECTED | Analyzer. |
| | DB2 subsystems that have active collections. |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | 1. SMP/E |
|REQUIRED | 2. z/OS System Programming |
| | 3. CA DB2 Tools Installation and Maintenance procedures. |
+----------+-----------------------------------------------------------+
|ACCESS | 1. Product runtime libraries. |
|REQUIRED | |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
To implement the PTF:
1. Stop product collections.
2. Stop the Xmanager task.
3. Update the runtime library.
4. Restart the Xmanager task.
Important!
Please do not apply maintenance to the Xmanager runtime libraries with
Xmanager active as it may result in a discrepancy between
dynamically loaded components and statically loaded components.
This may result in unpredictable behavior with CA-DB2 tools and/or may
CA DB2 Tools 18.0 26
CA RS 1511 - PTF RO84960 Details
Release Service Detailscompromise the operating system/DB2 including possible failures.
).
CA DB2 Tools 18.0 27
CA RS 1511 - PTF RO84979 DetailsCA DB2 Tools 18.0 27
CA RS 1511 - PTF RO84979 Details
Release Service Details18.0 RO84979 RO84979 M.C.S. ENTRIES = ++PTF (RO84979)
HIGH CPU UTILIZATION FOR EXCP0258 AND EXCP0376
PROBLEM DESCRIPTION:
CA SYSVIEW Performance Management Option for DB2 for z/OS (IDB2) IQL
exceptions EXCP0258 and EXCP0376 have a default "Number of seconds to
display after last occurrence" set to 1 week. This might lead to extensive
number of exception occurrences to be kept in memory, causing high CPU
overhead. The default display time for these exceptions has been reduced to
1 hour and related IQL requests were updated to be reset at midnight.
SYMPTOMS:
High CPU utilization when collection of IFCIDs 258 and 376 is active.
IMPACT:
High CPU utilization.
CIRCUMVENTION:
Update the definitions of EXCP0258 and EXCP0376 IQL exceptions to set the
"Number of seconds to display after last occurrence" field to a smaller
value.
PRODUCT(S) AFFECTED:
CA SYSVIEW Performance Management Option for DB2 for z/OS Version 18.0
CA SYSVIEW Performance Management Option for DB2 for z/OS Version 19.0
Related Problem:
IDB2 1866
Copyright (C) 2015 CA. All rights reserved. R01100-D180-SP1
DESC(HIGH CPU UTILIZATION FOR EXCP0258 AND EXCP0376).
++VER (Z038)
FMID (CIDBI00)
PRE ( RO73901 RO74677 RO74879 RO75439 RO76303 RO78961
RO81582 )
SUP ( TR84979 )
++HOLD (RO84979) SYSTEM FMID(CIDBI00)
REASON (ACTION ) DATE (15286)
COMMENT (
+----------------------------------------------------------------------+
| CA SYSVIEW Performance Management Option for DB2 for z/OS |
| Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | Before Exception System Restart. |
+----------+-----------------------------------------------------------+
|PURPOSE | Default definitions of the IQL exceptions EXCP0258 and |
| | EXCP0376 were udpated so that "Number of seconds to |
| | display after last occurrence" are set to 1 hour instead |
| | of 1 week. However this change is only automatically |
| | applied when an empty exception file is initially |
| | formatted after the product installation. So manual action|
| | is required to change the exception definitions provided |
| | the exceptions are active. |
+----------+-----------------------------------------------------------+
|USERS | All users. |
|AFFECTED | |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | Product administration. |
|REQUIRED | |
+----------+-----------------------------------------------------------+
|ACCESS | Update access to the "Permanent Exception Definitions". |
|REQUIRED | |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
1. Go to menu "0 Permanent Exception Definitions"
2. Choose "4 External/IQL Based Exceptions (Shadow Definitions)"
CA DB2 Tools 18.0 28
CA RS 1511 - PTF RO84979 Details
Release Service Details3a. Select "EXCP0258" with "U" action to update the exception.
3b. Select "Exception Display Control" with "S" action.
3c. Enter "3600" into the field "Number of seconds to display after
last occurrence", press Enter to save the changes and then
PF3 to go back to the exception list.
4a. Select "EXCP0376" with "U" action to update the exception.
4b. Select "Exception Display Control" with "S" action.
4c. Enter "3600" into the field "Number of seconds to display after
last occurrence", press Enter to save the changes and then
PF3 to go back to the exception list.
).
CA DB2 Tools 18.0 29
CA RS 1511 - PTF RO84989 DetailsCA DB2 Tools 18.0 29
CA RS 1511 - PTF RO84989 Details
Release Service Details18.0 RO84989 RO84989 M.C.S. ENTRIES = ++PTF (RO84989)
NO DATA OR BLANK OUTPUT ON SOME SCREENS
PROBLEM DESCRIPTION:
CA SYSVIEW Performance Management Option for DB2 for z/OS (IDB2) fails to
allocate a sufficient buffer for the output of some IQL requests.
This causes the user interface to display the 'no data' information panel
or a blank output screen. The probability of this defect is dependent on the
size of the request output. Requests requiring a large output buffer, such as
the System Parameters (SYSPARMS) and the Active Threads (THRDACTV) are most
likely to be affected.
SYMPTOMS:
The System Parameters screen (option 1.6.3) produces no output.
IMPACT:
Some online IQL request output cannot be displayed.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA SYSVIEW Performance Management Option for DB2 for z/OS Release 19.0
CA SYSVIEW Performance Management Option for DB2 for z/OS Release 18.0
CA Insight Database Performance Monitor for DB2 for z/OS Release 17.0
CA Insight Database Performance Monitor for DB2 for z/OS Release 16.0
Related Problem:
IDB2 1886
Copyright (C) 2015 CA. All rights reserved. R01101-D180-SP1
DESC(NO DATA OR BLANK OUTPUT ON SOME SCREENS).
++VER (Z038)
FMID (CIDBI00)
PRE ( RO74677 RO74826 RO74879 RO75439 RO76826 RO78961
RO81132 RO82325 RO83711 )
SUP ( TR84989 )
CA DB2 Tools 18.0 30
CA RS 1511 - PTF RO84997 DetailsCA DB2 Tools 18.0 30
CA RS 1511 - PTF RO84997 Details
Release Service Details18.0 RO84997 RO84997 M.C.S. ENTRIES = ++PTF (RO84997)
PREV/NEXT ON THREAD HISTORY SHOWS A BLANK SCREEN
PROBLEM DESCRIPTION:
CA SYSVIEW Performance Management Option for DB2 for z/OS (IDB2) fails to
correctly navigate between multiple threads in thread history.
When a thread detail is selected from option 6.2 (Thread History - List all
Threads), PF5 and PF6 should allow for inspecting the previous and the next
thread respectively. Occasionally this operation fails and blank output or
the contents of the current screen is displayed instead.
SYMPTOMS:
Blank screen is displayed when PF5 or PF6 is pressed on one of the history
thread detail screens.
IMPACT:
Browsing through multiple thread details in history is cumbersome.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA SYSVIEW Performance Management Option for DB2 for z/OS Release 18.0
CA Insight Database Performance Monitor for DB2 for z/OS Release 17.0
CA Insight Database Performance Monitor for DB2 for z/OS Release 16.0
Related Problem:
IDB2 1890
Copyright (C) 2015 CA. All rights reserved. R01102-D180-SP1
DESC(PREV/NEXT ON THREAD HISTORY SHOWS A BLANK SCREEN).
++VER (Z038)
FMID (CIDBI00)
PRE ( RO73625 RO73861 RO73925 RO73990 RO74129 RO74677
RO74826 RO74879 RO75439 RO77072 RO77678 RO78738
RO78961 RO80610 RO81947 RO82325 RO82720 RO83711 )
SUP ( RO81327 TR81327 TR84997 )
CA DB2 Tools 18.0 31
CA RS 1511 - PTF RO85014 DetailsCA DB2 Tools 18.0 31
CA RS 1511 - PTF RO85014 Details
Release Service Details18.0 RO85014 RO85014 M.C.S. ENTRIES = ++PTF (RO85014)
S0C1 AFTER SQLCODE -911
PROBLEM DESCRIPTION:
CA Fast Load for DB2 for z/OS (PFL) can abnormally terminate with a S0C1 when
experiencing a contention issue while updating the restart tables. Instead
of abending, PFL should attempt to retry what it was doing when the
contention occurred.
SYMPTOMS:
PFL will issue an error message and issue an SQL error from DB2. The DB2
error is as follows:
DSNT408I SQLCODE = -911, ERROR: THE CURRENT UNIT OF WORK HAS BEEN
ROLLED BACK DUE TO DEADLOCK OR TIMEOUT. REASON 00C9008E, TYPE
OF RESOURCE 00000210, AND RESOURCE NAME xxxxxxxx.yyyyyyyy.000-
00003
and the PFL-issued PUT error message is:
PUT4315W - Update failed with SQLCODE -911
** Attempting RETRY **
In certain situations, there will not be a PUT message.
IMPACT:
Error message PFL0713E will be issued and the product will stop processing or
abnormally terminate.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Fast Load for DB2 for z/OS Version 18.0
CA Fast Load for DB2 for z/OS Version 19.0
Related Problem:
PFL 1157
Copyright (C) 2015 CA. All rights reserved. R01104-D180-SP1
DESC(S0C1 AFTER SQLCODE -911).
++VER (Z038)
FMID (CPFLI00)
PRE ( RO75158 RO79586 RO82275 RO83759 RO83928 )
SUP ( TR83595 TR85014 )
++IF FMID(CPUTI00) REQ(RO85015 ) .
CA DB2 Tools 18.0 32
CA RS 1511 - PTF RO85015 DetailsCA DB2 Tools 18.0 32
CA RS 1511 - PTF RO85015 Details
Release Service Details18.0 RO85015 RO85015 M.C.S. ENTRIES = ++PTF (RO85015)
S0C1 AFTER SQLCODE -911
PROBLEM DESCRIPTION:
CA Fast Load for DB2 for z/OS (PFL) can abnormally terminate with a S0C1 when
experiencing a contention issue while updating the restart tables. Instead
of abending, PFL should attempt to retry what it was doing when the
contention occurred.
SYMPTOMS:
PFL will issue an error message and issue an SQL error from DB2. The DB2
error is as follows:
DSNT408I SQLCODE = -911, ERROR: THE CURRENT UNIT OF WORK HAS BEEN
ROLLED BACK DUE TO DEADLOCK OR TIMEOUT. REASON 00C9008E, TYPE
OF RESOURCE 00000210, AND RESOURCE NAME xxxxxxxx.yyyyyyyy.000-
00003
and the PFL-issued PUT error message is:
PUT4315W - Update failed with SQLCODE -911
** Attempting RETRY **
In certain situations, there will not be a PUT message.
IMPACT:
Error message PFL0713E will be issued and the product will stop processing or
abnormally terminate.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Fast Load for DB2 for z/OS Version 18.0
CA Fast Load for DB2 for z/OS Version 19.0
Related Problem:
PFL 1157
Copyright (C) 2015 CA. All rights reserved. R01104-D180-SP1
DESC(S0C1 AFTER SQLCODE -911).
++VER (Z038)
FMID (CPUTI00)
PRE ( RO75346 RO76023 RO76036 RO79589 RO82277 RO83760 )
SUP ( RO81867 TR81659 TR81867 TR85015 )
++IF FMID(CPFLI00) REQ(RO85014 ) .
CA DB2 Tools 18.0 33
CA RS 1511 - PTF RO85016 DetailsCA DB2 Tools 18.0 33
CA RS 1511 - PTF RO85016 Details
Release Service Details18.0 RO85016 RO85016 M.C.S. ENTRIES = ++PTF (RO85016)
WRONG TABLE ACCESS OCCURS IN THE SQL TABLE ACTIVITY DISPLAY
PROBLEM DESCRIPTION:
CA Detector for DB2 for z/OS (PDT) may sometimes show an unrelated table on
the Detector SQL Table Activity Display. Similarly, when viewing the DETECTOR
Table SQL Activity Display from CA Subsystem Analyzer for DB2 for z/OS (PSA),
an SQL program statement may be associated to the unrelated table.
This occurs when executing synchronized Detector and Subsystem Analyzer
collections.
SYMPTOMS:
The wrong table access is observed in the DETECTOR SQL Table Activity
Display. Likewise, the wrong SQL program statement is listed in the PSA
DETECTOR Table SQL Activity Display.
IMPACT:
Incorrect information about the system and SQL path is reported.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
Detector Release 17.0
Detector Version 18.0
Detector Version 19.0
Related Problem:
PDT 1318
Copyright (C) 2015 CA. All rights reserved. R01105-D180-SP1
DESC(WRONG TABLE ACCESS OCCURS IN THE SQL TABLE ACTIVITY DISPLAY).
++VER (Z038)
FMID (CPDTI00)
PRE ( RO76368 RO76486 RO76563 RO77329 RO78446 RO79934
RO80897 RO83209 RO83388 RO83695 )
SUP ( TR85016 )
++HOLD (RO85016) SYSTEM FMID(CPDTI00)
REASON (RESTART) DATE (15272)
COMMENT (
+----------------------------------------------------------------------+
| CA Detector for DB2 for z/OS Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | Before Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | Avoidance of module mismatch related errors in an Xmanager|
+----------+-----------------------------------------------------------+
|USERS | Collections of DB2 statistics via Detector or Subsystem |
|AFFECTED | Analyzer. |
| | DB2 subsystems that have active collections. |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | 1. SMP/E |
|REQUIRED | 2. z/OS System Programming |
| | 3. CA DB2 Tools Installation and Maintenance procedures. |
+----------+-----------------------------------------------------------+
|ACCESS | 1. Product runtime libraries. |
|REQUIRED | |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
To implement the PTF:
1. Stop product collections.
2. Stop the Xmanager task.
3. Update the runtime library.
4. Restart the Xmanager task.
Important!
Please do not apply maintenance to the Xmanager runtime libraries with
Xmanager active as it may result in a discrepancy between
CA DB2 Tools 18.0 34
CA RS 1511 - PTF RO85016 Details
Release Service Detailsdynamically loaded components and statically loaded components.
This may result in unpredictable behavior with CA-DB2 tools and/or may
compromise the operating system/DB2 including possible failures.
).
CA DB2 Tools 18.0 35
CA RS 1511 - PTF RO85033 DetailsCA DB2 Tools 18.0 35
CA RS 1511 - PTF RO85033 Details
Release Service Details18.0 RO85033 RO85033 M.C.S. ENTRIES = ++PTF (RO85033)
SY REPORTS SHOWING EX OPTION IN HELP
PROBLEM DESCRIPTION:
In CA RC/Query for DB2 for z/OS (RCQ), the System(SY) reports show Execute
Clist/REXX (EX) as line command in help panel.
SYMPTOMS:
User defined line command EX is not valid on SY reports yet it is shown in
help panel.
IMPACT:
User may be misled with incorrect help panel.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA RC/Query for DB2 for z/OS Release 17.0
CA RC/Query for DB2 for z/OS Version 18.0
CA RC/Query for DB2 for z/OS Version 19.0
Related Problem:
RCQ 1493
Copyright (C) 2015 CA. All rights reserved. R01108-D180-SP1
DESC(SY REPORTS SHOWING EX OPTION IN HELP).
++VER (Z038)
FMID (CINSI00)
SUP ( TR85033 )
++IF FMID(CRCQI00) REQ(RO85034 ) .
CA DB2 Tools 18.0 36
CA RS 1511 - PTF RO85034 DetailsCA DB2 Tools 18.0 36
CA RS 1511 - PTF RO85034 Details
Release Service Details18.0 RO85034 RO85034 M.C.S. ENTRIES = ++PTF (RO85034)
SY REPORTS SHOWING EX OPTION IN HELP
PROBLEM DESCRIPTION:
In CA RC/Query for DB2 for z/OS (RCQ), the System(SY) reports show Execute
Clist/REXX (EX) as line command in help panel.
SYMPTOMS:
User defined line command EX is not valid on SY reports yet it is shown in
help panel.
IMPACT:
User may be misled with incorrect help panel.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA RC/Query for DB2 for z/OS Release 17.0
CA RC/Query for DB2 for z/OS Version 18.0
CA RC/Query for DB2 for z/OS Version 19.0
Related Problem:
RCQ 1493
Copyright (C) 2015 CA. All rights reserved. R01108-D180-SP1
DESC(SY REPORTS SHOWING EX OPTION IN HELP).
++VER (Z038)
FMID (CRCQI00)
PRE ( RO74958 RO75207 )
SUP ( TR85034 )
++IF FMID(CINSI00) REQ(RO85033 ) .
CA DB2 Tools 18.0 37
CA RS 1511 - PTF RO85037 DetailsCA DB2 Tools 18.0 37
CA RS 1511 - PTF RO85037 Details
Release Service Details18.0 RO85037 RO85037 M.C.S. ENTRIES = ++PTF (RO85037)
FAILURE MAKING INCREMENTAL COPY FOR 1G PARTITIONED UTS
PROBLEM DESCRIPTION:
CA Quick Copy for DB2 for z/OS (PQC) may fail to create an incremental copy
for DSSIZE 1G partitioned universal tablespaces.
Note: This is a fix for EXCP NO processing only. Fix for EXCP YES will be
provided separately.
SYMPTOMS:
PQC creates empty copy or copy containing just header page and segmented map
IMPACT:
The copy created is unusable.
CIRCUMVENTION:
Specify LRSNCOPY YES in the SYSIN.
PRODUCT(S) AFFECTED:
Quick Copy Release 17.0
Quick Copy Release 18.0
Quick Copy Release 19.0
Related Problem:
PQC 792
Copyright (C) 2015 CA. All rights reserved. R01109-D180-SP1
DESC(FAILURE MAKING INCREMENTAL COPY FOR 1G PARTITIONED UTS).
++VER (Z038)
FMID (CUGRI00)
PRE ( RO74952 RO75457 RO76025 RO76037 )
SUP ( RO78779 TR78779 TR85037 )
CA DB2 Tools 18.0 38
CA RS 1511 - PTF RO85044 DetailsCA DB2 Tools 18.0 38
CA RS 1511 - PTF RO85044 Details
Release Service Details18.0 RO85044 RO85044 M.C.S. ENTRIES = ++PTF (RO85044)
EXTRA BLANK LINE IN TABLE OBJECT DEPENDENCY
PROBLEM DESCRIPTION:d
In CA RC/Query for DB2 for z/OS(RCQ), the Table object dependency report
display contain an extra blank line in the report.
SYMPTOMS:
Extra line inserted in the object dependancy for table object.
IMPACT:
The blank line is confusing and taking space.
CIRCUMVENTION:
None
Related Problem:
RCQ 1496
Copyright (C) 2015 CA. All rights reserved. R01112-D180-SP1
DESC(EXTRA BLANK LINE IN TABLE OBJECT DEPENDENCY).
++VER (Z038)
FMID (CRCQI00)
SUP ( TR85044 )
CA DB2 Tools 18.0 39
CA RS 1511 - PTF RO85046 DetailsCA DB2 Tools 18.0 39
CA RS 1511 - PTF RO85046 Details
Release Service Details18.0 RO85046 RO85046 M.C.S. ENTRIES = ++PTF (RO85046)
SC-R REPORT DOES NOT SHOW VERSION OF ROUTINE
PROBLEM DESCRIPTION:
In CA RC/Query for DB2 for z/OS (RCQ), the Schema-Routine(SC-R) report does
not show the version of a routine associated to a schema.
SYMPTOMS:
The Schema-routine(SC-R) report displays all routines but does not show
version of a routine.
IMPACT:
You will not be able to identify the uniqueness of a routine.
CIRCUMVENTION:
NONE.
PRODUCT(S) AFFECTED:
CA RC/Query for DB2 for z/OS Version 17.0
CA RC/Query for DB2 for z/OS Version 18.0
CA RC/Query for DB2 for z/OS Version 19.0
Related Problem:
RCQ 1491
Copyright (C) 2015 CA. All rights reserved. R01113-D180-SP1
DESC(SC-R REPORT DOES NOT SHOW VERSION OF ROUTINE).
++VER (Z038)
FMID (CRCQI00)
PRE ( RO75328 )
SUP ( TR85046 )
++HOLD (RO85046) SYSTEM FMID(CRCQI00)
REASON (DB2BIND) DATE (15282)
COMMENT (
+----------------------------------------------------------------------+
| CA RC/Query for DB2 for z/OS Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | After Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | Bind Plans and Packages |
+----------+-----------------------------------------------------------+
|USERS | |
|AFFECTED | All Users |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | |
|REQUIRED | CA DB2 Tools Post Install Customization. |
+----------+-----------------------------------------------------------+
|ACCESS | 1. CA DB2 Tools Post Install |
|REQUIRED | 2. BIND, SYSADM or SYSCNTL on DB2 subsystem. |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
DBRMs have changed as part of this maintenance. Refer to the
Implementation Guide for details on how to perform the following step.
1. Use Post-Install Tailoring option to Bind Product Packages and Plans.
).
CA DB2 Tools 18.0 40
CA RS 1511 - PTF RO85047 DetailsCA DB2 Tools 18.0 40
CA RS 1511 - PTF RO85047 Details
Release Service Details18.0 RO85047 RO85047 M.C.S. ENTRIES = ++PTF (RO85047)
.CONNECT KEYWORD MISSING USING DDL/HDDL COMMAND & REMOTE LOC
PROBLEM DESCRIPTION:
In CA RC/Query for DB2 for z/OS(RCQ), DDL or HDDL command does not generate a
.CONNECT batch processor statement when using remote location.
SYMPTOMS:
.CONNECT is missing when executing DDL/HDDL command with a remote location
which results in following error.
BPA0159E: UNABLE TO DETERMINE DB2 VERSION -OR- A .CONNECT
PROBLEM TO DB2 EXISTS; PROCESSING TERMINATED.
NEXT STATEMENT TO EXECUTE IS:
IMPACT:
Batch processor ends with return code = 16.
CIRCUMVENTION:
You need to manually insert .CONNECT SSID statement at the beginning.
Related Problem:
RCQ 1494
Copyright (C) 2015 CA. All rights reserved. R01114-D180-SP1
DESC(.CONNECT KEYWORD MISSING USING DDL/HDDL COMMAND & REMOTE LOC).
++VER (Z038)
FMID (CINSI00)
PRE ( RO82105 )
SUP ( TR85047 )
CA DB2 Tools 18.0 41
CA RS 1511 - PTF RO85050 DetailsCA DB2 Tools 18.0 41
CA RS 1511 - PTF RO85050 Details
Release Service Details18.0 RO85050 RO85050 M.C.S. ENTRIES = ++PTF (RO85050)
RESERVE OBID ANALYSIS OPTION IS IGNORED.
PROBLEM DESCRIPTION:
In CA RC/Migrator for DB2 for z/OS (RCM), while executing an RC/Merger (RMM)
analysis on a strategy with the Reserve OBID option selected, RMM fails to
reserve the OBID for the table resulting in OBID translation.
SYMPTOMS:
While executing analysis, following message is displayed:
RCM0136I - TABLE OBID 3 WAS UNAVAILABLE. RC/MERGER WILL
PERFORM OBID TRANSLATION FROM 3 TO 6
FOR TABLE CHOSA16.TB1SLAM6.
IMPACT:
Table at target side is created with different OBID and performance is
affected due to OBID translations.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: RC/Migrator Release 18.0
RC/Migrator Release 19.0
Related Problem:
RMM 203
Copyright (C) 2015 CA. All rights reserved. R01115-D180-SP1
DESC(RESERVE OBID ANALYSIS OPTION IS IGNORED.).
++VER (Z038)
FMID (CINSI00)
PRE ( RO75265 RO75319 RO75383 RO76218 RO83170 RO83587 )
SUP ( RO76219 RO84719 RO84941 TR76219 TR84678 TR84719
TR84941 TR85050 )
++HOLD (RO85050) SYSTEM FMID(CINSI00)
REASON (MSGSKEL) DATE (15274)
COMMENT (
+----------------------------------------------------------------------+
| CA Database Management Solution for DB2 for zOS Base Install |
| Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | After Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | Relink XMESSAGES |
+----------+-----------------------------------------------------------+
|USERS | |
|AFFECTED | All CA DB2 Tools Users |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | |
|REQUIRED | CA DB2 Tools Post Install Customization. |
+----------+-----------------------------------------------------------+
|ACCESS | 1. CA DB2 Tools Post Install |
|REQUIRED | 2. BIND Authority on DB2 subsystems |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
XMESSAGE components have changes as part of this maintenance.
If you do not customize XMESSAGES, no further action is required.
If you do customize XMESSAGES, after maintenance is APPLIED
1. Re-apply XMESSAGE customizations and relink XMESSAGE load modules.
Refer to the Post Installation and Customization Guide for details.
).
CA DB2 Tools 18.0 42
CA RS 1511 - PTF RO85071 DetailsCA DB2 Tools 18.0 42
CA RS 1511 - PTF RO85071 Details
Release Service Details18.0 RO85071 RO85071 M.C.S. ENTRIES = ++PTF (RO85071)
RQE00837 MESSAGE MISSING IN BATCH MODE FOR SY-Z/SY-D REPORTS
PROBLEM DESCRIPTION:
In CA RC/Query for DB2 for z/OS (RCQ), the SY-Z and SY-D reports do not
show XMSG RQE00387 in batch mode.
SYMPTOMS:
The SY-Z and SY-D report do not show the informational message RQE00837
in batch mode equivalent to online message RQ837I.
Example:
Online - RQ837I: THIS OPTION HAS BEEN MOVED TO THREAD TERMINATION/DYNAMIC.
Batch - RQE00999: RQE00837 ERROR HAS OCCURED BUT ERROR TEXT NOT AVAILABLE.
IMPACT:
You may get confused with error message in batch mode.
CIRCUMVENTION:
None.
Related Problem:
RCQ 1495
Copyright (C) 2015 CA. All rights reserved. R01116-D180-SP1
DESC(RQE00837 MESSAGE MISSING IN BATCH MODE FOR SY-Z/SY-D REPORTS).
++VER (Z038)
FMID (CRCQI00)
SUP ( TR85071 )
++HOLD (RO85071) SYSTEM FMID(CRCQI00)
REASON (MSGSKEL) DATE (15278)
COMMENT (
+----------------------------------------------------------------------+
| CA RC/Query for DB2 for z/OS Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | After Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | Relink XMESSAGES |
+----------+-----------------------------------------------------------+
|USERS | |
|AFFECTED | All CA DB2 Tools Users |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | |
|REQUIRED | CA DB2 Tools Post Install Customization. |
+----------+-----------------------------------------------------------+
|ACCESS | 1. CA DB2 Tools Post Install |
|REQUIRED | 2. BIND Authority on DB2 subsystems |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
XMESSAGE components have changes as part of this maintenance.
If you do not customize XMESSAGES, no further action is required.
If you do customize XMESSAGES, after maintenance is APPLIED
1. Re-apply XMESSAGE customizations and relink XMESSAGE load modules.
Refer to the Post Installation and Customization Guide for details.
).
CA DB2 Tools 18.0 43
CA RS 1511 - PTF RO85092 DetailsCA DB2 Tools 18.0 43
CA RS 1511 - PTF RO85092 Details
Release Service Details18.0 RO85092 RO85092 M.C.S. ENTRIES = ++PTF (RO85092)
PP023E: INTERNAL ERROR IN PZA#STK1
PROBLEM DESCRIPTION:
When using CA Plan Analyzer for DB2 for z/OS (PPA) to view the PPA SQL
Statement Report, the following message may be displayed:
PP023E: Internal error in PZA#STK1. RC=32, Reason= , Reason2=8
This message indicates a problem retrieving SQL statement text from the
DB2 catalog, which could prevent further PPA functionality for the user.
SYMPTOMS:
Message PP023E, accompanied by CSECT name and return codes.
IMPACT:
User is prevented from viewing the SQL statement text for the selected
criteria.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Plan Analyzer for DB2 for z/OS Release 17.0
CA Plan Analyzer for DB2 for z/OS Version 18.0
CA Plan Analyzer for DB2 for z/OS Version 19.0
PRODUCT OPENED PROBLEM
Related Problem:
PPADB2 930
Copyright (C) 2015 CA. All rights reserved. R01119-D180-SP1
DESC(PP023E: INTERNAL ERROR IN PZA#STK1).
++VER (Z038)
FMID (CINSI00)
PRE ( RO75313 RO84185 )
SUP ( TR85092 )
CA DB2 Tools 18.0 44
CA RS 1511 - PTF RO85107 DetailsCA DB2 Tools 18.0 44
CA RS 1511 - PTF RO85107 Details
Release Service Details18.0 RO85107 RO85107 M.C.S. ENTRIES = ++PTF (RO85107)
ADDITIONAL ERROR LOGIC WHEN READING PRODUCT PARMLIB MEMBERS
PROBLEM DESCRIPTION:
Additional internal diagnostics are needed when reading the
CA Database Management Solutions for DB2 for z/OS product parmlib
members in order to diagnose a rare condition where a CHECK call
abends.
This PTF does not solve the underlying problem, but will provide
additional information in a generated SYSMDUMP that will assist
in diagnosing the problem.
SYMPTOMS:
S001 abends when reading product parmlib members. This can also
occur when an Xmanager performs a Health Check.
IMPACT:
The process reading the parmlib fails.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Database Management Solution for DB2 for zOS Base Install Release 17.0
CA Database Management Solution for DB2 for zOS Base Install Version 18.0
CA Database Management Solution for DB2 for zOS Base Install Version 19.0
Related Problem:
GEN 1262
Copyright (C) 2015 CA. All rights reserved. R01120-D180-SP1
DESC(ADDITIONAL ERROR LOGIC WHEN READING PRODUCT PARMLIB MEMBERS).
++VER (Z038)
FMID (CINSI00)
SUP ( TR85107 )
CA DB2 Tools 18.0 45
CA RS 1511 - PTF RO85115 DetailsCA DB2 Tools 18.0 45
CA RS 1511 - PTF RO85115 Details
Release Service Details18.0 RO85115 RO85115 M.C.S. ENTRIES = ++PTF (RO85115)
BATCH CMD IN IDENTIFY PROBLEM SQL GETS PPPPBPM PANEL ERROR
PROBLEM DESCRIPTION:
In CA Plan Analyzer for DB2 for z/OS(PPA), the BATCH primary command
in Identify Problem SQL report encountered a panel error in PPPPRMB.
SYMPTOMS:
A user had generated the Identify Problem SQL report online, and
in between specifying the BATCH primary command had changed a couple
of the input header fields resulting in a field error. A combination
of the error message pointing the cursor to the field in error and
processing allowed to proceed forward to BATCH Reporting JOB Submission
panel (PPPPRMB) resulted in ISPF panel DIALOG error.
IMPACT:
Although an ISPF dialog panel error is issued, the impact is minor.
The user is able to correct the field error, before resubmitting the
BATCH command a second time.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
Plan Analyzer Release 17.0
Plan Analyzer Version 18.0
Plan Analyzer Version 19.0
Related Problem:
PPADB2 931
Copyright (C) 2015 CA. All rights reserved. R01121-D180-SP1
DESC(BATCH CMD IN IDENTIFY PROBLEM SQL GETS PPPPBPM PANEL ERROR).
++VER (Z038)
FMID (CPPAI00)
PRE ( RO73796 RO74983 RO75760 )
SUP ( TR85115 )
CA DB2 Tools 18.0 46
CA RS 1511 - PTF RO85120 DetailsCA DB2 Tools 18.0 46
CA RS 1511 - PTF RO85120 Details
Release Service Details18.0 RO85120 RO85120 M.C.S. ENTRIES = ++PTF (RO85120)
S0C1 ABEND IN UTLGLIOE OFFSET +19C
PROBLEM DESCRIPTION:
Executing CA Rapid Reorg for DB2 for z/OS to reorg an object.
When the number of SYSREC or SYSUT1 DDNAMES exceeds the defaulted
or specified UNLOAD-TASKS or MAXTASK values, Rapid Reorg may abend
in UTAGLIOE.
SYMPTOMS:
Reorg may encounter an abend in UTLGLIOE:
IEA995I SYMPTOM DUMP OUTPUT 213
SYSTEM COMPLETION CODE=0C1 REASON CODE=00000001
TIME=10.01.51 SEQ=61232 CPU=0000 ASID=026C
PSW AT TIME OF ERROR 078C2000 B40B119C ILC 2 INTC 01
ACTIVE LOAD MODULE ADDRESS=340B1000 OFFSET=0000019C
NAME=UTLGLIOE
DATA AT PSW 340B1196 - 301807FE 00DEAD1E C995A581
PRR3001I - Tablespace DATABASE.TSNAME.0017 Opened for Unload - UL1
PRR0072E - CSECT: RRA$UL1 Abended, Code: X'840C1000' - ESTAE Intercepted
PRR0091E - Tablespace Database.TSSPACE.0021
Application Abended when UNLOADing the Tablespace
Task ECB: X'000C1000' Return Code: X'0000000C'
Detected in module RRA$ULD
PRR0028I - RAPID REORG Processing Ended - Return Code: 008
IMPACT:
Rapid Reorg abends. No recovery is needed.
CIRCUMVENTION:
Increase the value for UNLOAD-TASKS to be at least the number of
SYSRECs specified in JCL.
PRODUCT(S) AFFECTED:
CA Rapid Reorg for DB2 for z/OS Version 18.0
CA Rapid Reorg for DB2 for z/OS Version 19.0
Related Problem:
PRR 1265
Copyright (C) 2015 CA. All rights reserved. R01122-D180-SP1
DESC(S0C1 ABEND IN UTLGLIOE OFFSET +19C).
++VER (Z038)
FMID (CPRRI00)
PRE ( RO79588 )
SUP ( TR85120 )
CA DB2 Tools 18.0 47
CA RS 1511 - PTF RO85171 DetailsCA DB2 Tools 18.0 47
CA RS 1511 - PTF RO85171 Details
Release Service Details18.0 RO85171 RO85171 M.C.S. ENTRIES = ++PTF (RO85171)
S438 ABEND IN UTLGLRI2
PROBLEM DESCRIPTION:
Fast Load for DB2 for z/OS part level Load replace can receive an
S438 Abend when processing an index.
SYMPTOMS:
Fast Load can abend with the following:
PUT2101E - CSECT UTAGLIX2 Abended - X'84438000' ESTAE Intercepted
**SDWA**3A8E8070 3A8E84A4 84438000 FF040010 00000000 ................
.....
PUT2101E - CSECT UTAGLRI2 Abended - X'84438000' ESTAE Intercepted
PFL3003E - Index task processing abended
PFL3004E - Task ECB X'00438000' Return Code: X'00000010'
PFL0208E - Datasets did not load successfully -
RECOVERY required before RESTART
IMPACT:
The load fails.
CIRCUMVENTION:
Use a GLOBAL RESUME YES load instead of partition level load.
PRODUCT(S) AFFECTED:
CA Fast Load for DB2 for z/OS Version 18.0
CA Fast Load for DB2 for z/OS Version 19.0
Related Problem:
PFL 1162
Copyright (C) 2015 CA. All rights reserved. R01123-D180-SP1
DESC(S438 ABEND IN UTLGLRI2).
++VER (Z038)
FMID (CPFLI00)
PRE ( RO73812 RO74758 RO75088 RO75158 RO76020 RO77232
RO79586 RO82027 RO82275 RO83928 )
SUP ( RO75738 TR75738 TR85171 )
++IF FMID(CPUTI00) REQ(RO85172 ) .
++HOLD (RO85171) SYSTEM FMID(CPFLI00)
REASON (MSGSKEL) DATE (15279)
COMMENT (
+----------------------------------------------------------------------+
| CA Fast Load for DB2 for z/OS Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | After Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | Relink XMESSAGES |
+----------+-----------------------------------------------------------+
|USERS | |
|AFFECTED | All CA DB2 Tools Users |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | |
|REQUIRED | CA DB2 Tools Post Install Customization. |
+----------+-----------------------------------------------------------+
|ACCESS | 1. CA DB2 Tools Post Install |
|REQUIRED | 2. BIND Authority on DB2 subsystems |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
XMESSAGE components have changes as part of this maintenance.
If you do not customize XMESSAGES, no further action is required.
If you do customize XMESSAGES, after maintenance is APPLIED
1. Re-apply XMESSAGE customizations and relink XMESSAGE load modules.
Refer to the Post Installation and Customization Guide for details.
).
CA DB2 Tools 18.0 48
CA RS 1511 - PTF RO85172 DetailsCA DB2 Tools 18.0 48
CA RS 1511 - PTF RO85172 Details
Release Service Details18.0 RO85172 RO85172 M.C.S. ENTRIES = ++PTF (RO85172)
S438 ABEND IN UTLGLRI2
PROBLEM DESCRIPTION:
Fast Load for DB2 for z/OS part level Load replace can receive an
S438 Abend when processing an index.
SYMPTOMS:
Fast Load can abend with the following:
PUT2101E - CSECT UTAGLIX2 Abended - X'84438000' ESTAE Intercepted
**SDWA**3A8E8070 3A8E84A4 84438000 FF040010 00000000 ................
.....
PUT2101E - CSECT UTAGLRI2 Abended - X'84438000' ESTAE Intercepted
PFL3003E - Index task processing abended
PFL3004E - Task ECB X'00438000' Return Code: X'00000010'
PFL0208E - Datasets did not load successfully -
RECOVERY required before RESTART
IMPACT:
The load fails.
CIRCUMVENTION:
Use a GLOBAL RESUME YES load instead of partition level load.
PRODUCT(S) AFFECTED:
CA Fast Load for DB2 for z/OS Version 18.0
CA Fast Load for DB2 for z/OS Version 19.0
Related Problem:
PFL 1162
Copyright (C) 2015 CA. All rights reserved. R01123-D180-SP1
DESC(S438 ABEND IN UTLGLRI2).
++VER (Z038)
FMID (CPUTI00)
PRE ( RO75162 RO79897 RO82144 RO82277 RO83930 )
SUP ( TR85172 )
++IF FMID(CPFLI00) REQ(RO85171 ) .
++HOLD (RO85172) SYSTEM FMID(CPUTI00)
REASON (MSGSKEL) DATE (15279)
COMMENT (
+----------------------------------------------------------------------+
| CA Utilities Common For DB2 Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | After Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | Relink XMESSAGES |
+----------+-----------------------------------------------------------+
|USERS | |
|AFFECTED | All CA DB2 Tools Users |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | |
|REQUIRED | CA DB2 Tools Post Install Customization. |
+----------+-----------------------------------------------------------+
|ACCESS | 1. CA DB2 Tools Post Install |
|REQUIRED | 2. BIND Authority on DB2 subsystems |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
XMESSAGE components have changes as part of this maintenance.
If you do not customize XMESSAGES, no further action is required.
If you do customize XMESSAGES, after maintenance is APPLIED
1. Re-apply XMESSAGE customizations and relink XMESSAGE load modules.
Refer to the Post Installation and Customization Guide for details.
).
CA DB2 Tools 18.0 49
CA RS 1511 - PTF RO85182 DetailsCA DB2 Tools 18.0 49
CA RS 1511 - PTF RO85182 Details
Release Service Details18.0 RO85182 RO85182 M.C.S. ENTRIES = ++PTF (RO85182)
IDB2ACCT DB2-CPU VALUE INCORRECT
PROBLEM DESCRIPTION:
The CA Insight Database Performance Monitor for DB2 for z/OS (IDB2) may
report an incorrect value for the IDB2ACCT DB2-CPU field. IDB2 uses the class
1 time stored procedure CPU time instead of class 2 in the field value
computation.
SYMPTOMS:
The DB2 CPU field on the Thread IDB2 Accounting Overview screen shows a
higher time value than the Total DB2 CPU field on the Active Threads Detail
screen.
IMPACT:
The DB2 CPU time is reported incorrectly on the IDB2 accounting screens.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Insight Database Performance Monitor for DB2 for z/OS Release 16.0
CA Insight Database Performance Monitor for DB2 for z/OS Release 17.0
CA SYSVIEW Performance Management Option for DB2 for z/OS Release 18.0
CA SYSVIEW Performance Management Option for DB2 for z/OS Release 19.0
Related Problem:
IDB2 1896
Copyright (C) 2015 CA. All rights reserved. R01124-D180-SP1
DESC(IDB2ACCT DB2-CPU VALUE INCORRECT).
++VER (Z038)
FMID (CIDBI00)
PRE ( RO73925 RO74129 RO74677 RO74879 RO75439 RO77226
RO78006 RO78828 RO78961 RO82325 RO83711 )
SUP ( RO75810 RO79219 RO81583 RO83466 TR75810 TR79219
TR81583 TR83466 TR85182 )
CA DB2 Tools 18.0 50
CA RS 1511 - PTF RO85200 DetailsCA DB2 Tools 18.0 50
CA RS 1511 - PTF RO85200 Details
Release Service Details18.0 RO85200 RO85200 M.C.S. ENTRIES = ++PTF (RO85200)
PTATOKE SQLDA C AND C++ SUPPORT
PROBLEM DESCRIPTION:
When using products that use the SQL Tokenizer a S0C4 could occur when
C HOSTLANG statements that had pointer host variables were being
proccessed.
SYMPTOMS:
S0C4
IMPACT:
Only affects the small subset of C HOSTLANG SQL statements that use
pointers in host variables.
CIRCUMVENTION:
N/A
PRODUCT(S) AFFECTED:
CA Plan Analyzer for DB2 for z/OS Version 18.0
CA Plan Analyzer for DB2 for z/OS Version 19.0
Related Problem:
PPADB2 893
Copyright (C) 2015 CA. All rights reserved. R01125-D180-SP1
DESC(PTATOKE SQLDA C AND C++ SUPPORT).
++VER (Z038)
FMID (CINSI00)
PRE ( RO73813 RO75756 RO76119 RO79460 RO80174 RO80886 )
SUP ( RO74576 RO77247 TR74576 TR76604 TR77247 TR85200 )
CA DB2 Tools 18.0 51
CA RS 1511 - PTF RO85222 DetailsCA DB2 Tools 18.0 51
CA RS 1511 - PTF RO85222 Details
Release Service Details18.0 RO85222 RO85222 M.C.S. ENTRIES = ++PTF (RO85222)
DA CRITICAL EXTENDED CREATES NON RECOVERABLE ICS FOR PFR
PROBLEM DESCRIPTION:
CA Online Rapid Reorg for DB2 for Z/OS (POR), using the
EXTENDED-TSREORG YES option produces inline image copies
that CA Fast Recover for DB2 for Z/OS (PFR) cannot process
during recovery.
The circumstances are as follows:
1) EXTENDED-TSREORG YES is specified or
EXTENDED-TSREORG NO is specified and the RIDDSP keyword is not used.
2) PQC BEFORE or AFTER is specified.
3) Tablespace is a 4-byte RID object.
SYMPTOMS:
PRR online completes normally. There is no indication of a problem.
PFR will restore less or in some cases no data. The tablespace
can be empty after recovery.
IMPACT:
A data recovery can result in DATA lost.
CIRCUMVENTION:
Specify EXTENDED-TSREORG NO using RID datasets. Do not specify
the RIDDSP option.
PRODUCT(S) AFFECTED: POR Release 18
Release 19
Related Problem:
POR 542
Copyright (C) 2015 CA. All rights reserved. R01126-D180-SP1
DESC(DA CRITICAL EXTENDED CREATES NON RECOVERABLE ICS FOR PFR).
++VER (Z038)
FMID (CPRRI00)
PRE ( RO73665 RO74445 RO76022 RO76403 RO78826 RO80353
RO81515 RO82143 RO82276 RO83344 RO83976 )
SUP ( TR84897 TR84962 TR85222 )
++IF FMID(CPUTI00) REQ(RO85223 ) .
CA DB2 Tools 18.0 52
CA RS 1511 - PTF RO85223 DetailsCA DB2 Tools 18.0 52
CA RS 1511 - PTF RO85223 Details
Release Service Details18.0 RO85223 RO85223 M.C.S. ENTRIES = ++PTF (RO85223)
DA CRITICAL EXTENDED CREATES NON RECOVERABLE ICS FOR PFR
PROBLEM DESCRIPTION:
CA Online Rapid Reorg for DB2 for Z/OS (POR), using the
EXTENDED-TSREORG YES option produces inline image copies
that CA Fast Recover for DB2 for Z/OS (PFR) cannot process
during recovery.
The circumstances are as follows:
1) EXTENDED-TSREORG YES is specified or
EXTENDED-TSREORG NO is specified and the RIDDSP keyword is not used.
2) PQC BEFORE or AFTER is specified.
3) Tablespace is a 4-byte RID object.
SYMPTOMS:
PRR online completes normally. There is no indication of a problem.
PFR will restore less or in some cases no data. The tablespace
can be empty after recovery.
IMPACT:
A data recovery can result in DATA lost.
CIRCUMVENTION:
Specify EXTENDED-TSREORG NO using RID datasets. Do not specify
the RIDDSP option.
PRODUCT(S) AFFECTED: POR Release 18
Release 19
Related Problem:
POR 542
Copyright (C) 2015 CA. All rights reserved. R01126-D180-SP1
DESC(DA CRITICAL EXTENDED CREATES NON RECOVERABLE ICS FOR PFR).
++VER (Z038)
FMID (CPUTI00)
SUP ( TR85223 )
++IF FMID(CPRRI00) REQ(RO85222 ) .
CA DB2 Tools 18.0 53
CA RS 1511 - PTF RO85226 DetailsCA DB2 Tools 18.0 53
CA RS 1511 - PTF RO85226 Details
Release Service Details18.0 RO85226 RO85226 M.C.S. ENTRIES = ++PTF (RO85226)
APPLY RO80595 FAILS WITHOUT DETECTOR
PROBLEM DESCRIPTION:
Applying fix RO80595 to CA Database Management for DB2 for z/OS fails
if CA Detector for DB2 for z/OS (PDT) is not installed.
SYMPTOMS:
SMP apply fails with error message GIM67301W for the following modules.
DT$DXRCC
DT$EXVCC
DT$VALCC
DT$VUNCC
IMPACT:
Users are unable to apply maintenance to the INS component of CA
Database Management for DB2 for z/OS.
CIRCUMVENTION:
None
Related Problem:
INS 406
Copyright (C) 2015 CA. All rights reserved. R01127-D180-SP1
DESC(APPLY RO80595 FAILS WITHOUT DETECTOR).
++VER (Z038)
FMID (CINSI00)
PRE ( RO83358 )
SUP ( AR83358 TR85226 )
VERSION(CPDTI00).
VERSION(CPDTI00).
VERSION(CPDTI00).
VERSION(CPDTI00).
CA DB2 Tools 18.0 54
CA RS 1511 - PTF RO85228 DetailsCA DB2 Tools 18.0 54
CA RS 1511 - PTF RO85228 Details
Release Service Details18.0 RO85228 RO85228 M.C.S. ENTRIES = ++PTF (RO85228)
INCORRECT ENQ RNAME OF D
PROBLEM DESCRIPTION:
CA Utilities for DB2 for z/OS will use an incorrect RNAME value when
serializing DB2 Catalog Access. The RNAME value is --D-- when it
should be --DB2 CATALOG ACCESS SERIALIZING FOR ssid-- where ssid
is the Local DB2 subsystem name.
SYMPTOMS:
When conflicts are present the DISPLAY GRS,C command shows:
MIM1181I CONFLICTS DISPLAY
S=SYS CADB2 D
IMPACT:
The RNAME does not have include the proper DB2 system so
the JOB may be prevented from executing when no lock is necessary.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
Utilities Common Release 17.0
Utilities Common Version 18.0
Utilities Common Version 19.0
Related Problem:
PUT 749
Copyright (C) 2015 CA. All rights reserved. R01128-D180-SP1
DESC(INCORRECT ENQ RNAME OF D).
++VER (Z038)
FMID (CINSI00)
PRE ( RO81827 )
SUP ( TR85228 )
CA DB2 Tools 18.0 55
CA RS 1511 - PTF RO85247 DetailsCA DB2 Tools 18.0 55
CA RS 1511 - PTF RO85247 Details
Release Service Details18.0 RO85247 RO85247 M.C.S. ENTRIES = ++PTF (RO85247)
INVALID DATABASE NAME ON SQL TRACE DISPLAY WITH DB2 11
PROBLEM DESCRIPTION:
On the CA Detector for DB2 for z/OS (PDT) "DETECTOR SQL Trace Locks
Acquired Display," a DBASE value (a database name) may be blanks or
an invalid value. This problem can occur only with DB2 11.
SYMPTOMS:
On the DETECTOR SQL Trace Locks Acquired Display, a DBASE value (a
database name) is blanks or an invalid value.
IMPACT:
Determining the correct database name for a lock may be difficult
or impossible.
CIRCUMVENTION:
None.
Detector Release 17.0
Detector Release 18.0
Detector Version 19.0
Related Problem:
PDT 1338
Copyright (C) 2015 CA. All rights reserved. R01130-D180-SP1
DESC(INVALID DATABASE NAME ON SQL TRACE DISPLAY WITH DB2 11).
++VER (Z038)
FMID (CPDTI00)
SUP ( TR85245 TR85247 )
++HOLD (RO85247) SYSTEM FMID(CPDTI00)
REASON (RESTART) DATE (15277)
COMMENT (
+----------------------------------------------------------------------+
| CA Detector for DB2 for z/OS Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | Before Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | Avoidance of module mismatch related errors in an Xmanager|
+----------+-----------------------------------------------------------+
|USERS | Collections of DB2 statistics via Detector or Subsystem |
|AFFECTED | Analyzer. |
| | DB2 subsystems that have active collections. |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | 1. SMP/E |
|REQUIRED | 2. z/OS System Programming |
| | 3. CA DB2 Tools Installation and Maintenance procedures. |
+----------+-----------------------------------------------------------+
|ACCESS | 1. Product runtime libraries. |
|REQUIRED | |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
To implement the PTF:
1. Stop product collections.
2. Stop the Xmanager task.
3. Update the runtime library.
4. Restart the Xmanager task.
Important!
Please do not apply maintenance to the Xmanager runtime libraries with
Xmanager active as it may result in a discrepancy between
dynamically loaded components and statically loaded components.
This may result in unpredictable behavior with CA-DB2 tools and/or may
compromise the operating system/DB2 including possible failures.
).
CA DB2 Tools 18.0 56
CA RS 1511 - PTF RO85252 DetailsCA DB2 Tools 18.0 56
CA RS 1511 - PTF RO85252 Details
Release Service Details18.0 RO85252 RO85252 M.C.S. ENTRIES = ++PTF (RO85252)
GRAPHIHC/VARGRAPHIC DATA TRUNCATION IN FORM MODE
PROBLEM DESCRIPTION:
CA RC/Update for DB2 for z/OS, RC/Browse does not display GRAPHIC/VARGRAPHIC
data correctly in FORM mode.
SYMPTOMS:
Data in GRAPHICH/VARGRAPHIC columns might be truncated one character when
browsing or editing a table in FORM mode.
IMPACT:
Display of GRAPHIC/VARGRAPHIC column data is incorrect.
CIRCUMVENTION:
You have to switch to column mode view.
Related Problem:
RCU 1055
Copyright (C) 2015 CA. All rights reserved. R01131-D180-SP1
DESC(GRAPHIHC/VARGRAPHIC DATA TRUNCATION IN FORM MODE).
++VER (Z038)
FMID (CRCUI00)
PRE ( RO82562 RO84506 )
SUP ( TR85252 )
CA DB2 Tools 18.0 57
CA RS 1511 - PTF RO85259 DetailsCA DB2 Tools 18.0 57
CA RS 1511 - PTF RO85259 Details
Release Service Details18.0 RO85259 RO85259 M.C.S. ENTRIES = ++PTF (RO85259)
DC-GROUP SYSPARM NOT OVERRIDDEN BY LAST OCCURRENCE IN FILE
PROBLEM DESCRIPTION:
CA SYSVIEW Performance Management Option for DB2 for z/OS (IDB2)
data collector initialization will use the value in the FIRST
occurrence of the DC-GROUP= system parameter. This is inconsistent
with Sysview/DB2 SYSPARM handling (last occurrence of a SYSPARM is always
used).
The last occurrence of DC-GROUP will now be used.
SYMPTOMS:
If DC-GROUP is coded more than once in the SYSPARMS deck, the last
occurrence is ignored.
IMPACT:
Processing is inconsistent with standard SYSPARM handling rules.
CIRCUMVENTION:
Only code the DC-GROUP= parameter once.
PRODUCT(S) AFFECTED:
CA SYSVIEW Performance Management Option for DB2 for z/OS Version 18.0
CA SYSVIEW Performance Management Option for DB2 for z/OS Version 19.0
Related Problem:
IDB2 1894
Copyright (C) 2015 CA. All rights reserved. R01132-D180-SP1
DESC(DC-GROUP SYSPARM NOT OVERRIDDEN BY LAST OCCURRENCE IN FILE).
++VER (Z038)
FMID (CIDBI00)
PRE ( RO73660 RO74677 RO74826 RO74879 RO75439 RO77226
RO78511 RO78828 RO78961 RO82325 )
SUP ( RO81339 TR81339 TR85076 TR85259 )
++HOLD (RO85259) SYSTEM FMID(CIDBI00)
REASON (ACTION ) DATE (15279)
COMMENT (
+----------------------------------------------------------------------+
| CA SYSVIEW Performance Management Option for DB2 for z/OS |
| Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | Before Restart |
+----------+-----------------------------------------------------------+
|PURPOSE |Ensure that you will be using the correct DC-GROUP Sysparm.|
+----------+-----------------------------------------------------------+
|USERS | |
|AFFECTED | |
| |Sysview/DB2 data collector address spaces. |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | |
|REQUIRED | |
| |Sysview/DB2 customization. |
+----------+-----------------------------------------------------------+
|ACCESS | |
|REQUIRED | |
| |Update access to the CA-Sysview/DB2 Sysparm file. |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
Review your Sysview/DB2 Sysparms. If DC-GROUP is coded more than
once, the LAST occurrence of it will be used. If this is NOT what
you want, remove the duplicate entries.
).
CA DB2 Tools 18.0 58
CA RS 1511 - PTF RO85263 DetailsCA DB2 Tools 18.0 58
CA RS 1511 - PTF RO85263 Details
Release Service Details18.0 RO85263 RO85263 M.C.S. ENTRIES = ++PTF (RO85263)
VARIABLE FORMAT DUMMY ROWID COLUMN FAILS TO LOAD
PROBLEM DESCRIPTION:
CA Fast Load for DB2 for z/OS (PFL) can issue an error message when
the following conditions are met:
- The table contains a ROWID column
- The ROWID column is loaded as a DUMMY column
- The positional parameter for the column is an *
If these conditions are met, PFL will issue an error message and stop
processing.
SYMPTOMS:
PFL will issue an error message and stop processing. The error message
is:
PFL0713E - Column DUMMY_ROWID_00001 is a dummy column that requires
definition.
IMPACT:
Error message PFL0713E will be issued and the product will stop
processing.
CIRCUMVENTION:
Alter the column definition on the LOAD control card to be a
VARCHAR type. The DUMMY processing will work correctly and PFL will
complete processing normally.
PRODUCT(S) AFFECTED:
CA Fast Load for DB2 for z/OS Version 18.0
CA Fast Load for DB2 for z/OS Version 19.0
Related Problem:
PFL 1155
Copyright (C) 2015 CA. All rights reserved. R01133-D180-SP1
DESC(VARIABLE FORMAT DUMMY ROWID COLUMN FAILS TO LOAD).
++VER (Z038)
FMID (CPFLI00)
PRE ( RO75158 RO76002 RO82275 RO83928 )
SUP ( RO77543 TR77543 TR84255 TR85263 )
CA DB2 Tools 18.0 59
CA RS 1511 - PTF RO85287 DetailsCA DB2 Tools 18.0 59
CA RS 1511 - PTF RO85287 Details
Release Service Details18.0 RO85287 RO85287 M.C.S. ENTRIES = ++PTF (RO85287)
COPY USER PROFILE DURING PRFCNVRT SQL -803
PROBLEM DESCRIPTION:
CA Report Facility (BIPRF) Running the conversion utility to copy the user
profile with the DUPLICATE(SKIP) parameter set, an SQL -803 is issued. This
occurs when converting from PRF release 15.0 and earlier.
SYMPTOMS:
When converting user profile with assigned group profile the conversion may
end with SQL error -803.
IMPACT:
The PRF conversion is not complete and PRF might not be useable.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
Report Facility Release 17.0
Report Facility Version 18.0
Report Facility Version 19.0
Related Problem:
BIPRF 591
Copyright (C) 2015 CA. All rights reserved. R01134-D180-SP1
DESC(COPY USER PROFILE DURING PRFCNVRT SQL -803).
++VER (Z038)
FMID (CPRFI00)
PRE ( RO75311 )
SUP ( TR85287 )
CA DB2 Tools 18.0 60
CA RS 1511 - PTF RO85294 DetailsCA DB2 Tools 18.0 60
CA RS 1511 - PTF RO85294 Details
Release Service Details18.0 RO85294 RO85294 M.C.S. ENTRIES = ++PTF (RO85294)
ZLB0002E DICTIONARY SEQUENTIAL ORDER REBUILD INDEX(ALL)
PROBLEM DESCRIPTION:
CA Fast Recover for DB2 for z/OS (PFR) can end with RC=8 when
processing multiple indexes with a REBUILD INDEX or a RECOVER
TABLESPACE with concurrent REBUILD INDEX on a compressed tablespace
SYMPTOMS:
PFR step ends with RC=8.
PTIMSGS shows message:
ZLB0002E DICTIONARY PAGES MUST BE IN SEQUENTIAL ORDER
The following error may also occur and is accompanied by another internal
abend S13E:
PUT2101E - CSECT UTAGLIX2 Abended - X'0013E000' ESTAE Intercepted
IMPACT:
The object is not recovered/rebuilt correctly and is not usable.
CIRCUMVENTION:
Split the REBUILD of multiple indexes in different REBUILD Index steps.
Each step should process only one index.
PRODUCT(S) AFFECTED:
Utility General Recovery and PFR PMM PQC PFC Version 18.0.0B
Utility General Recovery and PFR PMM PQC PFC Version 19.0.0B
Related Problem:
PFR 951
Copyright (C) 2015 CA. All rights reserved. R01136-D180-SP1
DESC(ZLB0002E DICTIONARY SEQUENTIAL ORDER REBUILD INDEX(ALL)).
++VER (Z038)
FMID (CUGRI00)
PRE ( RO73869 RO74491 RO74954 RO75421 RO78617 RO78711
RO79590 RO82145 RO82278 )
SUP ( RO73769 TR73769 TR85294 )
CA DB2 Tools 18.0 61
CA RS 1511 - PTF RO85331 DetailsCA DB2 Tools 18.0 61
CA RS 1511 - PTF RO85331 Details
Release Service Details18.0 RO85331 RO85331 M.C.S. ENTRIES = ++PTF (RO85331)
XNET ABEND S0C3 PXNMGXNT IXNTACAG WITH OFA SCALABILITY
PROBLEM DESCRIPTION:
Xnet PTFs that introduced OFA scalability (r18 RO84333 and
r19 RO83861) are marked in error. When these PTFs are applied and
Xnet is used in a configuration without CA Unified Facility
Application Server or CA Chorus the IXNTACAG (create Agent) routine
incurs ABEND S0C3 attempting to access the Xnet Execution Space
component.
This fixing PTF also addresses an unreported ABEND S0C3 occurrence
when the XES command is issued to an Xnet STC that does not have
the XES component activated.
SYMPTOMS:
The Xnet STC incurs an ABEND S0C3 when an agent STC issues the
AGENT-UP request (for example, when an Insight Data Collector STC
signals AGENT_UP).
The Xnet STC incurs an ABEND S0C3 when the XES command is issued
and the XES component is not active (the XES startup parameter
was not specified in the PXNPARM parameter member used by Xnet).
IMPACT:
The AGENT_UP indication from the agent STC is not processed due to
the ABEND S0C3 and communication with the agent is not possible.
CIRCUMVENTION:
Adding the XES parameter to the PXNPARM parameter member used by
Xnet will activate the XES component and prevent most occurrences
of the ABEND S0C3. There is a "timing" condition that may result
in ABEND S0C3 during AGENT_UP processing even when the XES
component has been activated. In this case the Xnet STC and the
agent STC should be stopped. The Xnet STC should be restarted.
After the Xnet STC is completely initialized the agent STC
should be restarted.
PRODUCT(S) AFFECTED:
CA XNET Communications Server For DB2 Version 18.0
CA XNET Communications Server For DB2 Version 19.0
Related Problem:
PXN 75
Copyright (C) 2015 CA. All rights reserved. R01137-D180-SP1
DESC(XNET ABEND S0C3 PXNMGXNT IXNTACAG WITH OFA SCALABILITY).
++VER (Z038)
FMID (CPXNI00)
PRE ( RO84333 )
SUP ( AR84333 TR85331 )
++HOLD (RO85331) SYSTEM FMID(CPXNI00)
REASON (ACTION ) DATE (15280)
COMMENT (
+----------------------------------------------------------------------+
| CA XNET Communications Server For DB2 Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | Before Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | This change resolves PE PTF RO84333. |
+----------+-----------------------------------------------------------+
|USERS | All Xnet users. |
|AFFECTED | |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | Xnet operations. |
|REQUIRED | |
+----------+-----------------------------------------------------------+
|ACCESS | Authority to stop and start the Xnet STC. |
|REQUIRED | |
+----------+-----------------------------------------------------------+
**************************
CA DB2 Tools 18.0 62
CA RS 1511 - PTF RO85331 Details
Release Service Details* STEPS TO PERFORM *
**************************
1. Apply this PTF to resolve problems with PE PTF RO84333 and its
companion PTF RO84332.
Follow all HOLDDATA instructions for PTFs RO84332 and RO84333.
).
CA DB2 Tools 18.0 63
CA RS 1511 - PTF RO85332 DetailsCA DB2 Tools 18.0 63
CA RS 1511 - PTF RO85332 Details
Release Service Details18.0 RO85332 RO85332 M.C.S. ENTRIES = ++PTF (RO85332)
SQLCODE -303 WHEN USING UTILITY OPTION STATS -> 'S'
PROBLEM DESCRIPTION:
When using CA RC/Migrator for DB2 for z/OS (RCM) to analyze a strategy
the analysis will end with SQLCODE -303 if the following conditions are true:
1) The strategy includes partitioned index.
2) The utility option STATS is set to 'S' during analysis.
3) The subsystem is V8 or V10(CM8) or V9(CM).
SYMPTOMS:
RMA199E PROGRAM RMA I2 RECEIVED THE FOLLOWING SQL ERROR:
DSNT408I SQLCODE = -303, ERROR: A VALUE CANNOT BE ASSIGNED TO OUTPUT
HOST VARIABLE NUMBER 13 BECAUSE THE DATA TYPES ARE NOT
COMPARABLE
IMPACT:
The analysis will end without generating any DDL.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA RC/Migrator for DB2 for z/OS Version 18.0
CA RC/Migrator for DB2 for z/OS Version 19.0
Related Problem:
RCM 2739
Copyright (C) 2015 CA. All rights reserved. R01138-D180-SP1
DESC(SQLCODE -303 WHEN USING UTILITY OPTION STATS -> 'S').
++VER (Z038)
FMID (CINSI00)
PRE ( RO74744 RO75329 RO83397 )
SUP ( TR85332 )
++HOLD (RO85332) SYSTEM FMID(CINSI00)
REASON (DB2BIND) DATE (15279)
COMMENT (
+----------------------------------------------------------------------+
| CA Database Management Solution for DB2 for zOS Base Install |
| Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | After Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | Bind Plans and Packages |
+----------+-----------------------------------------------------------+
|USERS | |
|AFFECTED | All Users |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | |
|REQUIRED | CA DB2 Tools Post Install Customization. |
+----------+-----------------------------------------------------------+
|ACCESS | 1. CA DB2 Tools Post Install |
|REQUIRED | 2. BIND, SYSADM or SYSCNTL on DB2 subsystem. |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
DBRMs have changed as part of this maintenance. Refer to the
Implementation Guide for details on how to perform the following step.
1. Use Post-Install Tailoring option to Bind Product Packages and Plans.
).
CA DB2 Tools 18.0 64
CA RS 1511 - PTF RO85342 DetailsCA DB2 Tools 18.0 64
CA RS 1511 - PTF RO85342 Details
Release Service Details18.0 RO85342 RO85342 M.C.S. ENTRIES = ++PTF (RO85342)
RU678E ERROR ON BROWSE OF SYSTRIGGERS
PROBLEM DESCRIPTION:
In CA RC/Update for DB2 for z/OS (RCU), While browsing a table in SEARCHED
mode with LOB, XML or DECFLOAT columns , browsing of the data ends with a
RU678E error message.
SYMPTOMS:
While browsing a table with LOB, XML or DECFLOAT columns and when the table
has no primary key defined, a RU678E message will occur.
Example:
When browsing e.g.table SYSTRIGGERS or SYSVIEWS it fails with
following error
RU678E RC/Edit can't edit or browse the current table.
IMPACT:
You are not able to browse a table having LOB/XML/DECFLOAT columns.
CIRCUMVENTION:
Change the RC/EDIT Profile to have: Default method for applying updates ==> P
Related Problem:
RCU 1056
Copyright (C) 2015 CA. All rights reserved. R01139-D180-SP1
DESC(RU678E ERROR ON BROWSE OF SYSTRIGGERS).
++VER (Z038)
FMID (CRCUI00)
PRE ( RO75337 RO82562 RO83334 RO83638 )
SUP ( TR85342 )
CA DB2 Tools 18.0 65
CA RS 1511 - PTF RO85385 DetailsCA DB2 Tools 18.0 65
CA RS 1511 - PTF RO85385 Details
Release Service Details18.0 RO85385 RO85385 M.C.S. ENTRIES = ++PTF (RO85385)
BROKEN PAGE AFTER PFL ON PARTITION V11 BIGTAIL
PROBLEM DESCRIPTION:
When CA Fast Load for DB2 for z/OS (PFL) loads a partitioned object with
extended RBA values in DB2 11, it provides an incorrect value in the
FOSMNENT space map page field. FOSMNENT indicates the maximum number of
pages allowed per space map. If you subsequently try to copy the object with
an IBM COPY job, or with a CA Quick Copy for DB2 for z/OS (PQC) job that
specifies SHRLEVEL REFERENCE and AUDIT 1 or 2, the job will fail with a
broken page message.
SYMPTOMS:
IBM COPY jobs fail with the following message:
DSNU441I -DTTA 223 11:28:14.89 DSNUBASA - BROKEN PAGE FOUND
DBNAME = DBname
TSNAME = TSname
DSNUM = DSnum
PAGE = page number
ERRORCODE = X'0CA8'
PQC jobs that specify SHRLEVEL REFERENCE with AUDIT 1 or 2 fail with the
following messages:
PUT0150E - Error(s) found for Tablespace DBNAME.TSNAME Partition 1
PUT0151E - Error(s) found for page 00000001
PUT0170E - The number of SPACEMAP entries is invalid
PUT0152E - Invalid data: 00002A28
PQC0072E ERROR ENCOUNTERED FROM AUDIT INIT CALL, RC = 0000
PQC0192E INTERNAL RC 16 AT LOCATION 0160
IMPACT:
You cannot copy the object with IBM COPY or with a PQC job that specifies
SHRLEVEL REFERENCE with AUDIT 1 or 2.
CIRCUMVENTION:
Run Reorg and then rerun IBM image copy.
PRODUCT(S) AFFECTED:
CA Fast Load for DB2 for z/OS Version 17.0
CA Fast Load for DB2 for z/OS Version 18.0
CA Fast Load for DB2 for z/OS Version 19.0
Related Problem:
PFL 1153
Copyright (C) 2015 CA. All rights reserved. R01142-D180-SP1
DESC(BROKEN PAGE AFTER PFL ON PARTITION V11 BIGTAIL).
++VER (Z038)
FMID (CPFLI00)
PRE ( RO75158 RO77232 RO82275 RO83928 )
SUP ( RO77538 RO79476 TR77538 TR79476 TR84218 TR85385 )
++IF FMID(CPUTI00) REQ(RO85386 ) .
CA DB2 Tools 18.0 66
CA RS 1511 - PTF RO85386 DetailsCA DB2 Tools 18.0 66
CA RS 1511 - PTF RO85386 Details
Release Service Details18.0 RO85386 RO85386 M.C.S. ENTRIES = ++PTF (RO85386)
BROKEN PAGE AFTER PFL ON PARTITION V11 BIGTAIL
PROBLEM DESCRIPTION:
When CA Fast Load for DB2 for z/OS (PFL) loads a partitioned object with
extended RBA values in DB2 11, it provides an incorrect value in the
FOSMNENT space map page field. FOSMNENT indicates the maximum number of
pages allowed per space map. If you subsequently try to copy the object with
an IBM COPY job, or with a CA Quick Copy for DB2 for z/OS (PQC) job that
specifies SHRLEVEL REFERENCE and AUDIT 1 or 2, the job will fail with a
broken page message.
SYMPTOMS:
IBM COPY jobs fail with the following message:
DSNU441I -DTTA 223 11:28:14.89 DSNUBASA - BROKEN PAGE FOUND
DBNAME = DBname
TSNAME = TSname
DSNUM = DSnum
PAGE = page number
ERRORCODE = X'0CA8'
PQC jobs that specify SHRLEVEL REFERENCE with AUDIT 1 or 2 fail with the
following messages:
PUT0150E - Error(s) found for Tablespace DBNAME.TSNAME Partition 1
PUT0151E - Error(s) found for page 00000001
PUT0170E - The number of SPACEMAP entries is invalid
PUT0152E - Invalid data: 00002A28
PQC0072E ERROR ENCOUNTERED FROM AUDIT INIT CALL, RC = 0000
PQC0192E INTERNAL RC 16 AT LOCATION 0160
IMPACT:
You cannot copy the object with IBM COPY or with a PQC job that specifies
SHRLEVEL REFERENCE with AUDIT 1 or 2.
CIRCUMVENTION:
Run Reorg and then rerun IBM image copy.
PRODUCT(S) AFFECTED:
CA Fast Load for DB2 for z/OS Version 17.0
CA Fast Load for DB2 for z/OS Version 18.0
CA Fast Load for DB2 for z/OS Version 19.0
Related Problem:
PFL 1153
Copyright (C) 2015 CA. All rights reserved. R01142-D180-SP1
DESC(BROKEN PAGE AFTER PFL ON PARTITION V11 BIGTAIL).
++VER (Z038)
FMID (CPUTI00)
SUP ( AC85453 TR85386 )
++IF FMID(CPFLI00) REQ(RO85385 ) .
CA DB2 Tools 18.0 67
CA RS 1511 - PTF RO85391 DetailsCA DB2 Tools 18.0 67
CA RS 1511 - PTF RO85391 Details
Release Service Details18.0 RO85391 RO85391 M.C.S. ENTRIES = ++PTF (RO85391)
ONLINE HELP MISSING FOR INTERVAL OPTION
PROBLEM DESCRIPTION:
CA Report Facility (BIPRF) online HELP is missing description of the Commit
Interval (INTERVAL) parameter on the Post Install screens for the PRF Table
Conversion Utility (PRFCNVRT) task.
SYMPTOMS:
There is no online help for the Commit Interval parameter in Post Install
screens.
IMPACT:
User cannot easily find the description of the Commit Interval parameter.
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED:
Report Facility Release 17.0
Report Facility Version 18.0
Report Facility Version 19.0
Related Problem:
BIPRF 612
Copyright (C) 2015 CA. All rights reserved. R01143-D180-SP1
DESC(ONLINE HELP MISSING FOR INTERVAL OPTION).
++VER (Z038)
FMID (CPRFI00)
PRE ( RO75249 )
SUP ( TR85350 TR85391 )
CA DB2 Tools 18.0 68
CA RS 1511 - PTF RO85395 DetailsCA DB2 Tools 18.0 68
CA RS 1511 - PTF RO85395 Details
Release Service Details18.0 RO85395 RO85395 M.C.S. ENTRIES = ++PTF (RO85395)
ABEND S0C4 NGRABPC0 AMXSSXC0 AFTER EDB CONTROL BLOCK CHANGE
PROBLEM DESCRIPTION:
CA SYSVIEW Performance Management Option for DB2 for z/OS (IDB2) may
encounter an S0C4 ABEND in the data collector if the Data Base
exceptions for high space used or high number extents is active. An
ABEND S0C4 may also occur when viewing the Open Data Sets request
(Option 1.6.2).
SYMPTOMS:
ABEND S0C4 in data collector module NGRABPC9/0/1 or AMXSSXC9/0/1.
Alternate symptoms may be missing or erroneous exceptions raised
for the Data Base exceptions (High Space Used or High number of Extents), or
invalid data displayed when viewing the DATASETS or EXTENTS requests.
IMPACT:
The status of DB2 data sets is not accurately reported. Exceptions may be
not raised, or erroneously raised.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Insight Database Performance Monitor for DB2 for z/OS Release 17.0
CA SYSVIEW Performance Management Option for DB2 for z/OS Version 18.0
CA SYSVIEW Performance Management Option for DB2 for z/OS Version 19.0
Related Problem:
IDB2 1876
Copyright (C) 2015 CA. All rights reserved. R01144-D180-SP1
DESC(ABEND S0C4 NGRABPC0 AMXSSXC0 AFTER EDB CONTROL BLOCK CHANGE).
++VER (Z038)
FMID (CIDBI00)
PRE ( RO73625 RO73861 RO73901 RO73925 RO73990 RO74129
RO74677 RO74826 RO74879 RO75439 RO76303 RO76570
RO77226 RO77678 RO78738 RO78961 RO81335 RO81582
RO81947 RO82229 RO82325 RO83061 RO83711 RO84357
RO84503 )
SUP ( RO75070 RO76117 RO77067 TR75070 TR76117 TR77067
TR85395 )
CA DB2 Tools 18.0 69
CA RS 1511 - PTF RO85397 DetailsCA DB2 Tools 18.0 69
CA RS 1511 - PTF RO85397 Details
Release Service Details18.0 RO85397 RO85397 M.C.S. ENTRIES = ++PTF (RO85397)
RCM0179W WHEN LRSN/RBA UPDATE ALL PAGES IN SAME SUBSYSTEM
PROBLEM DESCRIPTION:
In CA RC/Migrator for DB2 for z/OS (RCM), while executing an RC/Merger (RMM)
analysis on a strategy with the MOVE option selected within the same
subsystem, RMM resets the RBA/LRSN values on all the headers and data pages.
SYMPTOMS:
While executing the analysis, the following message is displayed:
RCM0179W - THE SOURCE SUBSYSTEM RBA/LRSN IS GREATER THAN THAT OF THE
TARGET SUBSYSTEM. RC/MERGER WILL NEED TO RESET
THE LAST UPDATED RBA/LRSN ON EVERY PAGE.
IMPACT:
As the pages of the target are updated, the performance of RC/Merger is
impacted.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: RC/Migrator Release 18.0
RC/Migrator Release 19.0
Related Problem:
RMM 204
Copyright (C) 2015 CA. All rights reserved. R01145-D180-SP1
DESC(RCM0179W WHEN LRSN/RBA UPDATE ALL PAGES IN SAME SUBSYSTEM).
++VER (Z038)
FMID (CINSI00)
PRE ( RO75319 RO83587 RO84941 RO85050 )
SUP ( RO84719 TR84678 TR84719 TR85397 )
CA DB2 Tools 18.0 70
CA RS 1511 - PTF RO85418 DetailsCA DB2 Tools 18.0 70
CA RS 1511 - PTF RO85418 Details
Release Service Details18.0 RO85418 RO85418 M.C.S. ENTRIES = ++PTF (RO85418)
SYSTEM_TIME COLUMN ATTRIBUTES MISSING FROM ALTER TABLE DDL
PROBLEM DESCRIPTION:
CA RC/Migrator for DB2 for z/OS (RCM) generates alter table DDL without
key attributes 'GENERATED ALWAYS', 'ROW BEGIN', 'ROW END' if the newly added
column is a SYSTEM_TIME column and the target subsystem supports DB2 V11.
SYMPTOMS:
'NOT NULL GENERATED ALWAYS AS ROW BEGIN' is missing from the follwoing
alter table DDL:
ALTER TABLE BDBS.LANT2XX
ADD SYS_START TIMESTAMP ( 12 )
;
IMPACT:
Customer will not be able to add a SYSTEM_TIME column.
CIRCUMVENTION:
PRODUCT(S) AFFECTED:
CA RC/Migrator for DB2 for z/OS Version 18.0
CA RC/Migrator for DB2 for z/OS Version 19.0
Related Problem:
RCM 2741
Copyright (C) 2015 CA. All rights reserved. R01147-D180-SP1
DESC(SYSTEM_TIME COLUMN ATTRIBUTES MISSING FROM ALTER TABLE DDL).
++VER (Z038)
FMID (CINSI00)
PRE ( RO75754 )
SUP ( RO80620 TR80620 TR85418 )
CA DB2 Tools 18.0 71
CA RS 1511 - PTF RO85435 DetailsCA DB2 Tools 18.0 71
CA RS 1511 - PTF RO85435 Details
Release Service Details18.0 RO85435 RO85435 M.C.S. ENTRIES = ++PTF (RO85435)
DB2 00C20110 ERROR AFTER PBG TABLESPACE REORG
PROBLEM DESCRIPTION:
CA Rapid Reorg for DB2 for z/OS (PRR) after reorganizing a partition by
growth tablespace, can cause subsequent
DB2 00C20110 errors when processing DB2 utilities.
The circumstances are as follows:
1) DATA-AVAILABLE NORMAL has been specified.
2) The tablespace being reorged is partitioned by growth.
3) The tablespace is defined with a DSSIZE specification.
4) PIECESIZE has a value of zero in the DB2 catalog for a non
partitioned index defined to the tablespace.
5) The index grows beyond the first dataset.
SYMPTOMS:
The reorg completes normally however,
A subsequent DB utility or DML returns the following ERROR code
DSNU590I !DB2G 251 12:17:32.54 DSNUKDRN - RESOURCE NOT AVAILABLE,
REASON=X'00C20110', ON DBname.IXname PROHIBITS PROCESSING
IMPACT:
The reorg builds the index incorrectly.
CIRCUMVENTION:
NONE.
PRODUCT(S) AFFECTED: PRR 16.0
PRR 17.0
PRR 18.0
PRR 19.0
Related Problem:
PRR 1262
Copyright (C) 2015 CA. All rights reserved. R01148-D180-SP1
DESC(DB2 00C20110 ERROR AFTER PBG TABLESPACE REORG).
++VER (Z038)
FMID (CPRRI00)
PRE ( RO73528 RO74121 RO75161 RO77233 RO77346 RO79588
RO82276 RO83929 )
SUP ( RO75741 RO83539 TR74106 TR75741 TR76800 TR83539
TR85435 )
CA DB2 Tools 18.0 72
CA RS 1511 - PTF RO85441 DetailsCA DB2 Tools 18.0 72
CA RS 1511 - PTF RO85441 Details
Release Service Details18.0 RO85441 RO85441 M.C.S. ENTRIES = ++PTF (RO85441)
INV RETCDE FROM -DISP DB DURING STRATEGY ANALYSIS
PROBLEM DESCRIPTION:
CA Recovery Analyzer for DB2 for z/OS (PRA) displays error message
"Inv Retcde from -DISP DB" in "Check TS/IX status" phase during strategy
analysis for index-space. This occurs if a database has been dropped but
an object that was within that database still has an entry in the strategy.
Analysis process stops.
SYMPTOMS:
PRA error report (PRAERRPT) displays:
Phase: Validate Spaces Exists
Warning IX is-name db-name Space not found in Catlg
Phase: Check TS/IX status
Sev Err IX is-name 0000 db-name Inv Retcde from -DISP DB
for missing object, followed by error message:
RAE00418: OVERRIDE_ERRORS parmlib setting of Y will be ignored:
The JCL generated may be unexecutable and therefore
will not be created
Analysis process stops.
IMPACT:
Recovery analysis process stops.
CIRCUMVENTION:
Remove dropped objects from strategy.
PRODUCT(S) AFFECTED:
Recovery Analyzer Release 17.0
Recovery Analyzer Version 18.0
Recovery Analyzer Version 19.0
Related Problem:
PRA 852
Copyright (C) 2015 CA. All rights reserved. R01149-D180-SP1
DESC(INV RETCDE FROM -DISP DB DURING STRATEGY ANALYSIS).
++VER (Z038)
FMID (CPRAI00)
SUP ( RO83784 RO84676 TR83784 TR84676 TR85441 )
CA DB2 Tools 18.0 73
CA RS 1511 - PTF RO85468 DetailsCA DB2 Tools 18.0 73
CA RS 1511 - PTF RO85468 Details
Release Service Details18.0 RO85468 RO85468 M.C.S. ENTRIES = ++PTF (RO85468)
PARTIAL ITE$STCK CAUSES DATA LOSS
PROBLEM DESCRIPTION:
Partial STCK value collected by CA Detector for DB2 for z/OS (PDT)
may cause missing or incorrect SQL statement statistics in the CA SYSVIEW
Performance Management Option for DB2 for z/OS (IDB2) accounting record.
These statistics are collected when the PDTSQL is specified in the
HIST-ACCT-DETAIL SYSPARM parameter.
SYMPTOMS:
Missing or incorrect SQL statement executions on the THRDIDSQ
(thread detail "SYSVDB2 Acct Rec SQL Summary"), HTUIDSQL (thread history
summary "SYSVDB2 Acct Rec SQL History Summary"), or HTIDBSQL (thread
history detail "SYSVDB2 Acct Rec SQL History") IQL displays.
IMPACT:
All CA SYSVIEW Performance Management Option for DB2 for z/OS users who
have the PDTSQL option included in the HIST-ACCT-DETAIL SYSPARM parameter.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Detector for DB2 for z/OS Version 18.0
CA Detector for DB2 for z/OS Version 19.0
Related Problem:
PDT 1339
Copyright (C) 2015 CA. All rights reserved. R01150-D180-SP1
DESC(PARTIAL ITE$STCK CAUSES DATA LOSS).
++VER (Z038)
FMID (CPDTI00)
PRE ( RO74470 RO75583 RO76368 RO76486 RO77248 RO77329
RO77520 RO78101 RO78198 RO78446 RO78514 RO78682
RO79431 RO79574 RO79877 RO79934 RO79949 RO80038
RO80194 RO80397 RO80869 RO80899 RO81146 RO81196
RO81417 RO82518 RO82587 RO82974 RO83695 RO84200 )
SUP ( RO73491 RO73552 RO74003 RO74580 RO83776 RO84898
TR73491 TR73552 TR74003 TR74580 TR74996 TR75133
TR75226 TR75241 TR75379 TR75436 TR75468 TR75494
TR75533 TR78973 TR79455 TR80527 TR80717 TR83776
TR84898 TR85468 )
++HOLD (RO85468) SYSTEM FMID(CPDTI00)
REASON (RESTART) DATE (15285)
COMMENT (
+----------------------------------------------------------------------+
| CA Detector for DB2 for z/OS Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | Before Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | Avoidance of module mismatch related errors in an Xmanager|
+----------+-----------------------------------------------------------+
|USERS | Collections of DB2 statistics via Detector or Subsystem |
|AFFECTED | Analyzer. |
| | DB2 subsystems that have active collections. |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | 1. SMP/E |
|REQUIRED | 2. z/OS System Programming |
| | 3. CA DB2 Tools Installation and Maintenance procedures. |
+----------+-----------------------------------------------------------+
|ACCESS | 1. Product runtime libraries. |
|REQUIRED | |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
To implement the PTF:
CA DB2 Tools 18.0 74
CA RS 1511 - PTF RO85468 Details
Release Service Details1. Stop product collections.
2. Stop the Xmanager task.
3. Update the runtime library.
4. Restart the Xmanager task.
Important!
Please do not apply maintenance to the Xmanager runtime libraries with
Xmanager active as it may result in a discrepancy between
dynamically loaded components and statically loaded components.
This may result in unpredictable behavior with CA-DB2 tools and/or may
compromise the operating system/DB2 including possible failures.
).
CA DB2 Tools 18.0 75
CA RS 1511 - PTF RO85474 DetailsCA DB2 Tools 18.0 75
CA RS 1511 - PTF RO85474 Details
Release Service Details18.0 RO85474 RO85474 M.C.S. ENTRIES = ++PTF (RO85474)
TRUNCATED VPSIZE DATA IN BP-DS REPORT
PROBLEM DESCRIPTION:
In CA RC/Query for DB2 for z/OS (RCQ), BP-DS report shows a truncated value
for the VPSIZE column.
SYMPTOMS:
The BP-DS report displays only 6 character data under VPSIZE report column.
even when buffer pool size is greater than 6 characters.
Example:
CMD NAME ID USE VPSIZE HPSIZE VPSEQT VPPSEQT
________ BP3 38 0 000000 N/A 80 50
________ BP4 39 0 30 N/A 80 50
IMPACT:
You cannot not be able to determine the VPSIZE value from the BP-DS report.
CIRCUMVENTION:
None.
Related Problem:
RCQ 1497
Copyright (C) 2015 CA. All rights reserved. R01152-D180-SP1
DESC(TRUNCATED VPSIZE DATA IN BP-DS REPORT).
++VER (Z038)
FMID (CRCQI00)
PRE ( RO75330 )
SUP ( TR85474 )
CA DB2 Tools 18.0 76
CA RS 1511 - PTF RO85481 DetailsCA DB2 Tools 18.0 76
CA RS 1511 - PTF RO85481 Details
Release Service Details18.0 RO85481 RO85481 M.C.S. ENTRIES = ++PTF (RO85481)
LBIND/LREBIND COMMANDS NOT SUPPORTED IN DB2 V10 CM8 MODE
PROBLEM DESCRIPTION:
In CA RC/Query for DB2 for z/OS (RCQ), LBIND/LREBIND commands are not
supported in DB2 v10 CM8 mode.
SYMPTOMS:
In DB2 v10 CM8 mode, issuing LBIND/LREBIND commands on packages returns an
error:-
DSNT408I SQLCODE = -206, ERROR: BUSTIMESENSITIVE IS NOT VALID IN THE
CONTEXT WHERE IT IS USED
IMPACT:
You cannot use LBIND/LREBIND commands in DB2 v10 CM8 mode.
CIRCUMVENTION:
NONE.
Related Problem:
RCQ 1498
Copyright (C) 2015 CA. All rights reserved. R01153-D180-SP1
DESC(LBIND/LREBIND COMMANDS NOT SUPPORTED IN DB2 V10 CM8 MODE).
++VER (Z038)
FMID (CINSI00)
PRE ( RO75312 )
SUP ( RO77458 TR77458 TR85038 TR85473 TR85481 )
CA DB2 Tools 18.0 77
CA RS 1511 - PTF RO85521 DetailsCA DB2 Tools 18.0 77
CA RS 1511 - PTF RO85521 Details
Release Service Details18.0 RO85521 RO85521 M.C.S. ENTRIES = ++PTF (RO85521)
INACCURATE CPU TIMES/STALE ZIIP TIMES FOR DISTRIBUTED THREAD
PROBLEM DESCRIPTION:
CA Thread Termination/Dynamic ZPARM for DB2 for z/OS (PTT) reports
inaccurate INDB2 CPU times for distributed threads. In addition, the
"Thread ZIIP CPU" time value on the Thread Terminator Thread Time
Display may not be updated readily for a distributed thread in
comparison to the corresponding time values on the CA Sysview
Performance Management Option for DB2 for z/OS (IDB2) "Active Thread
Detail" and "Thread Response Time" displays. This problem occurs with
DB2 10 and above. This solution resolves the problem for DB2 11 and
above, including DB2 11 CM.
SYMPTOMS:
The INDB2_CPU time value for a distributed thread on the Thread
Terminator Active Threads Display is inaccurate.
The "INDB2 CPU" time value on the Thread Terminator Thread Time Display
for a distributed thread is inaccurate.
The thread monitor does not select the appropriate distributed threads
when a nonzero "INDB2 CPU Time" thread monitor threshold value is in use
for distributed threads.
The "Thread ZIIP CPU" time value on the Thread Terminator Thread Time
Display for a distributed thread is not updated readily in comparison to
the "DB2 zIIP Time" and "Local DB2 zIIP" time values on the IDB2 "Active
Thread Detail" and "Thread Response Time" displays respectively.
IMPACT:
The thread monitor may terminate the wrong distributed threads or fail
to terminate the right distributed threads.
Viewing the PTT displays for distributed threads may lead to incorrect
conclusions based on the reported INDB2 CPU time consumption and zIIP
CPU time consumption of the distributed threads.
CIRCUMVENTION:
To ensure that the thread monitor will select the appropriate
distributed threads, do not use a nonzero "INDB2 CPU Time" thread monitor
threshold value for distributed threads.
PRODUCT(S) AFFECTED:
Thread Terminator Release 16.0
Thread Terminator Release 17.0
Thread Terminator Release 18.0
Thread Terminator Version 19.0
Related Problem:
PTT 330
Copyright (C) 2015 CA. All rights reserved. R01154-D180-SP1
DESC(INACCURATE CPU TIMES/STALE ZIIP TIMES FOR DISTRIBUTED THREAD).
++VER (Z038)
FMID (CINSI00)
PRE ( RO83304 RO83329 )
SUP ( RO74668 TR74668 TR85521 )
++IF FMID(CPDTI00) REQ(RO85522 ) .
++HOLD (RO85521) SYSTEM FMID(CINSI00)
REASON (RESTART) DATE (15285)
COMMENT (
+----------------------------------------------------------------------+
| CA Database Management Solution for DB2 for zOS Base Install |
| Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | Before Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | Avoidance of module mismatch related errors in an Xmanager|
+----------+-----------------------------------------------------------+
|USERS | Collections of DB2 statistics via Detector or Subsystem |
|AFFECTED | Analyzer. |
| | DB2 subsystems that have active collections. |
CA DB2 Tools 18.0 78
CA RS 1511 - PTF RO85521 Details
Release Service Details+----------+-----------------------------------------------------------+
|KNOWLEDGE | 1. SMP/E |
|REQUIRED | 2. z/OS System Programming |
| | 3. CA DB2 Tools Installation and Maintenance procedures. |
+----------+-----------------------------------------------------------+
|ACCESS | 1. Product runtime libraries. |
|REQUIRED | |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
To implement the PTF:
1. Stop product collections.
2. Stop the Xmanager task.
3. Update the runtime library.
4. Restart the Xmanager task.
Important!
Please do not apply maintenance to the Xmanager runtime libraries with
Xmanager active as it may result in a discrepancy between
dynamically loaded components and statically loaded components.
This may result in unpredictable behavior with CA-DB2 tools and/or may
compromise the operating system/DB2 including possible failures.
).
CA DB2 Tools 18.0 79
CA RS 1511 - PTF RO85522 DetailsCA DB2 Tools 18.0 79
CA RS 1511 - PTF RO85522 Details
Release Service Details18.0 RO85522 RO85522 M.C.S. ENTRIES = ++PTF (RO85522)
INACCURATE CPU TIMES/STALE ZIIP TIMES FOR DISTRIBUTED THREAD
PROBLEM DESCRIPTION:
CA Thread Termination/Dynamic ZPARM for DB2 for z/OS (PTT) reports
inaccurate INDB2 CPU times for distributed threads. In addition, the
"Thread ZIIP CPU" time value on the Thread Terminator Thread Time
Display may not be updated readily for a distributed thread in
comparison to the corresponding time values on the CA Sysview
Performance Management Option for DB2 for z/OS (IDB2) "Active Thread
Detail" and "Thread Response Time" displays. This problem occurs with
DB2 10 and above. This solution resolves the problem for DB2 11 and
above, including DB2 11 CM.
SYMPTOMS:
The INDB2_CPU time value for a distributed thread on the Thread
Terminator Active Threads Display is inaccurate.
The "INDB2 CPU" time value on the Thread Terminator Thread Time Display
for a distributed thread is inaccurate.
The thread monitor does not select the appropriate distributed threads
when a nonzero "INDB2 CPU Time" thread monitor threshold value is in use
for distributed threads.
The "Thread ZIIP CPU" time value on the Thread Terminator Thread Time
Display for a distributed thread is not updated readily in comparison to
the "DB2 zIIP Time" and "Local DB2 zIIP" time values on the IDB2 "Active
Thread Detail" and "Thread Response Time" displays respectively.
IMPACT:
The thread monitor may terminate the wrong distributed threads or fail
to terminate the right distributed threads.
Viewing the PTT displays for distributed threads may lead to incorrect
conclusions based on the reported INDB2 CPU time consumption and zIIP
CPU time consumption of the distributed threads.
CIRCUMVENTION:
To ensure that the thread monitor will select the appropriate
distributed threads, do not use a nonzero "INDB2 CPU Time" thread monitor
threshold value for distributed threads.
PRODUCT(S) AFFECTED:
Thread Terminator Release 16.0
Thread Terminator Release 17.0
Thread Terminator Release 18.0
Thread Terminator Version 19.0
Related Problem:
PTT 330
Copyright (C) 2015 CA. All rights reserved. R01154-D180-SP1
DESC(INACCURATE CPU TIMES/STALE ZIIP TIMES FOR DISTRIBUTED THREAD).
++VER (Z038)
FMID (CPDTI00)
PRE ( RO77329 )
SUP ( RO73722 TR73722 TR85522 )
++IF FMID(CINSI00) REQ(RO85521 ) .
CA DB2 Tools 18.0 80
CA RS 1511 - PTF RO85527 DetailsCA DB2 Tools 18.0 80
CA RS 1511 - PTF RO85527 Details
Release Service Details18.0 RO85527 RO85527 M.C.S. ENTRIES = ++PTF (RO85527)
SPECIAL CHARACTERS ARE NOT DISPLAYED IN EDIT OR BROWSE
PROBLEM DESCRIPTION:
In CA RC/Update for DB2 for z/OS (RCU), when you browse or edit table data
that contains special characters (for example, accented vowels or currency
symbols), the special characters are not displayed properly on the screen.
SYMPTOMS:
Special characters are displayed as periods in regular display mode, or
as blanks in hex display mode.
IMPACT:
Determining the true contents of table data is difficult as it is unclear.
CIRCUMVENTION:
None.
Related Problem:
RCU 927
Copyright (C) 2015 CA. All rights reserved. R01156-D180-SP1
DESC(SPECIAL CHARACTERS ARE NOT DISPLAYED IN EDIT OR BROWSE).
++VER (Z038)
FMID (CRCUI00)
SUP ( TR85527 )
CA DB2 Tools 18.0 81
CA RS 1511 - PTF RO85529 DetailsCA DB2 Tools 18.0 81
CA RS 1511 - PTF RO85529 Details
Release Service Details18.0 RO85529 RO85529 M.C.S. ENTRIES = ++PTF (RO85529)
MESSAGES SCREEN IS HORIZONTALLY TRUNCATED
PROBLEM DESCRIPTION:
The CA SYSVIEW Performance Management Option for DB2 for z/OS (IDB2) User
Interface may display horizontally truncated output on certain screens. The
problem occurs when PTF RO80935, RO82325 or RO83196 has been applied.
The list of affected screens includes Messages and the DCCPU command output.
SYMPTOMS:
After having visited the Active Threads screen, navigating to the Messages
screen produces a horizontally truncated output, with only the first ~50
characters of each line visible.
IMPACT:
Poor usability of the affected screens.
CIRCUMVENTION:
Restart the UI session before accessing one of the affected screens.
PRODUCT(S) AFFECTED:
CA SYSVIEW Performance Management Option for DB2 for z/OS Release 19.0
CA SYSVIEW Performance Management Option for DB2 for z/OS Release 18.0
CA Insight Database Performance Monitor for DB2 for z/OS Release 17.0
CA Insight Database Performance Monitor for DB2 for z/OS Release 16.0
Related Problem:
IDB2 1901
Copyright (C) 2015 CA. All rights reserved. R01157-D180-SP1
DESC(MESSAGES SCREEN IS HORIZONTALLY TRUNCATED).
++VER (Z038)
FMID (CIDBI00)
PRE ( RO73660 RO74463 RO74677 RO74826 RO74879 RO75439
RO78961 RO82325 )
SUP ( AR82325 TR85526 TR85529 )
CA DB2 Tools 18.0 82
CA RS 1511 - PTF RO85561 DetailsCA DB2 Tools 18.0 82
CA RS 1511 - PTF RO85561 Details
Release Service Details18.0 RO85561 RO85561 M.C.S. ENTRIES = ++PTF (RO85561)
EXPLAIN FAILS WITH SQL299
PROBLEM DESCRIPTION:
IN CA Plan Analyzer Services for DB2 for z/OS (PAS)Explain fails with SQL299
when derived column names exceeds 30 characters.
SYMPTOMS:
A generated SQL statement with derived column names with more than 30
characters triggered the SQL299 internal error message:
SQL299: You have specified an ordinary long column name
with a length exceeding 30 characters.
Total length must not exceed 30 characters.
IMPACT:
Any SQL using derived column names with more than 30 characters.
CIRCUMVENTION:
Change the SQL column name to be 30 characters or less.
PRODUCT(S) AFFECTED:
Plan Analyzer Services Release 18.0
Plan Analyzer Services Release 19.0
Related Problem:
PPADB2 932
Copyright (C) 2015 CA. All rights reserved. R01158-D180-SP1
DESC(EXPLAIN FAILS WITH SQL299).
++VER (Z038)
FMID (CINSI00)
PRE ( RO76119 RO76640 RO84444 )
SUP ( RO74300 RO74907 RO79359 RO84889 TR74300 TR74907
TR79359 TR84889 TR85561 )
CA DB2 Tools 18.0 83
CA RS 1511 - PTF RO85565 DetailsCA DB2 Tools 18.0 83
CA RS 1511 - PTF RO85565 Details
Release Service Details18.0 RO85565 RO85565 M.C.S. ENTRIES = ++PTF (RO85565)
PRR2251E INDEX DELETE ERROR
PROBLEM DESCRIPTION:
CA Rapid Reorg for DB2 for z/OS (PRR) receives an error when performing a
standard mode, partition level reorg with DATA-AVAILABLE NORMAL on a DB2 11
subsystem.
SYMPTOMS:
Reorg fails with the following messages:
UTAIXUIN IX: L#@IP01X Updates Expected: 000000444 Keys Processed: 000000000
PRR3002I - Tablespace L#@DP01.L#@SP01.0002 Unload...........898 Rows
PRR2251E - Index PDUTL01.L#@IP01X Delete Error
PRR0174E - Strip Index Processor Abended
IMPACT:
Reorg fails to reorg the object.
CIRCUMVENTION:
Reorg the entire object not just the specific partitions.
PRODUCT(S) AFFECTED:
CA Rapid Reorg for DB2 for z/OS Version 18.0
CA Rapid Reorg for DB2 for z/OS Version 19.0
Related Problem:
PRR 1266
Copyright (C) 2015 CA. All rights reserved. R01159-D180-SP1
DESC(PRR2251E INDEX DELETE ERROR).
++VER (Z038)
FMID (CPRRI00)
PRE ( RO73528 RO73629 RO74121 RO74302 RO74445 RO74759
RO75161 RO76022 RO76403 RO77233 RO77346 RO78826
RO79588 RO82143 RO82276 RO83344 RO83929 )
SUP ( RO75741 RO76551 RO83539 RO85120 RO85435 TR74106
TR75741 TR76551 TR76800 TR83539 TR85120 TR85435
TR85565 )
++IF FMID(CPUTI00) REQ(RO85566 ) .
CA DB2 Tools 18.0 84
CA RS 1511 - PTF RO85566 DetailsCA DB2 Tools 18.0 84
CA RS 1511 - PTF RO85566 Details
Release Service Details18.0 RO85566 RO85566 M.C.S. ENTRIES = ++PTF (RO85566)
PRR2251E INDEX DELETE ERROR
PROBLEM DESCRIPTION:
CA Rapid Reorg for DB2 for z/OS (PRR) receives an error when performing a
standard mode, partition level reorg with DATA-AVAILABLE NORMAL on a DB2 11
subsystem.
SYMPTOMS:
Reorg fails with the following messages:
UTAIXUIN IX: L#@IP01X Updates Expected: 000000444 Keys Processed: 000000000
PRR3002I - Tablespace L#@DP01.L#@SP01.0002 Unload...........898 Rows
PRR2251E - Index PDUTL01.L#@IP01X Delete Error
PRR0174E - Strip Index Processor Abended
IMPACT:
Reorg fails to reorg the object.
CIRCUMVENTION:
Reorg the entire object not just the specific partitions.
PRODUCT(S) AFFECTED:
CA Rapid Reorg for DB2 for z/OS Version 18.0
CA Rapid Reorg for DB2 for z/OS Version 19.0
Related Problem:
PRR 1266
Copyright (C) 2015 CA. All rights reserved. R01159-D180-SP1
DESC(PRR2251E INDEX DELETE ERROR).
++VER (Z038)
FMID (CPUTI00)
PRE ( RO74446 RO82277 )
SUP ( TR85566 )
++IF FMID(CPRRI00) REQ(RO85565 ) .
CA DB2 Tools 18.0 85
CA RS 1511 - PTF RO85569 DetailsCA DB2 Tools 18.0 85
CA RS 1511 - PTF RO85569 Details
Release Service Details18.0 RO85569 RO85569 M.C.S. ENTRIES = ++PTF (RO85569)
INVALID OPTIONS GENERATED FOR PLAN LBIND & LREBIND
ENHANCEMENT DESCRIPTION:
In CA RC/Query for DB2 for z/OS(RCQ), LBIND and LREBIND line commands on a
plan generates invalid keywords SYSTIMESENSITIVE, BUSTIMESENSITIVE, DESCSTAT
and ARCHIVESENSITIVE.
SYMPTOMS:
SYSTIMESENSITIVE, BUSTIMESENSITIVE, DESCSTAT and ARCHIVESENSITIVE are invalid
for a PLAN LBIND and LREBIND, the following error is displayed:
BPA0016E: DB2 UTILITY APPLICATION - INCOMPLETE. RETCODE = 8
IKJ56712I INVALID KEYWORD, SYSTIMESENSITIVE(NO)
IMPACT:
You cannot LBIND or REBIND the PLAN.
CIRCUMVENTION:
Manually remove these keywords from the generated batch cards.
PRODUCT(S) AFFECTED:
CA RC/Query for DB2 for z/OS Version 19.0
CA RC/Query for DB2 for z/OS Version 18.0
Related Problem:
RCQ 1489
Copyright (C) 2015 CA. All rights reserved. R01160-D180-SP1
DESC(INVALID OPTIONS GENERATED FOR PLAN LBIND & LREBIND).
++VER (Z038)
FMID (CINSI00)
PRE ( RO75312 )
SUP ( RO77458 RO85481 TR77458 TR85038 TR85473 TR85481
TR85569 )
CA DB2 Tools 18.0 86
CA RS 1511 - PTF RO85581 DetailsCA DB2 Tools 18.0 86
CA RS 1511 - PTF RO85581 Details
Release Service Details18.0 RO85581 RO85581 M.C.S. ENTRIES = ++PTF (RO85581)
S0C4 DURING ONLINE EXTENDED EXTRACT
PROBLEM DESCRIPTION:
In CA RC Extract for DB2 for z/OS(RCX), the ONLINE extract on EXTENDED
EXTRACT DEFINITION containing multiple SRCDEFS abends with a S0C4.
SYMPTOMS:
The following abend occurs when an ONLINE extraction is attempted:
SYSTEM COMPLETION CODE=0C4 REASON CODE=00000004
IMPACT:
You cannot perform the online extraction on an EXTENDED EXTRACT DEFINITION.
CIRCUMVENTION:
BATCH extraction on the EXTENDED EXTRACT DEFINITION runs successfully.
PRODUCTS AFFECTED:
RC/X 17.0
Related Problem:
RCX 567
Copyright (C) 2015 CA. All rights reserved. R01161-D180-SP1
DESC(S0C4 DURING ONLINE EXTENDED EXTRACT).
++VER (Z038)
FMID (CRCXI00)
PRE ( RO75425 RO81440 RO82482 )
SUP ( TR85581 )
CA DB2 Tools 18.0 87
CA RS 1511 - PTF RO85582 DetailsCA DB2 Tools 18.0 87
CA RS 1511 - PTF RO85582 Details
Release Service Details18.0 RO85582 RO85582 M.C.S. ENTRIES = ++PTF (RO85582)
ERROR ON USING OPTION I ON XO IN COMMAND CENTER
PROBLEM DESCRIPTION:
In CA RC Extract for DB2 for z/OS(RCX), when using the 'I' option (INSERT
INTO DEFAULT TARGETS USING SQL) on an extract object through the command
center it fails with return code 99.This happens when the table being loaded
has one or more index other than the primary index defined on it.
SYMPTOMS:
The Below error message is given during the online execution:
RCX1001E: RC/EXTRACT SQL LOAD INCOMPLETE.
RETCODE = 99
IMPACT:
You cannot use the 'I' option.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
RC/Extract Release 17.0
RC/Extract Version 18.0
RC/Extract Release 19.0
Related Problem:
RCX 569
Copyright (C) 2015 CA. All rights reserved. R01162-D180-SP1
DESC(ERROR ON USING OPTION I ON XO IN COMMAND CENTER).
++VER (Z038)
FMID (CRCXI00)
PRE ( RO82482 )
SUP ( TR85582 )
CA DB2 Tools 18.0 88
CA RS 1511 - PTF RO85583 DetailsCA DB2 Tools 18.0 88
CA RS 1511 - PTF RO85583 Details
Release Service Details18.0 RO85583 RO85583 M.C.S. ENTRIES = ++PTF (RO85583)
ERROR DURING SQL LOAD
PROBLEM DESCRIPTION:
In CA RC Extract for DB2 for z/OS(RCX), the SQL LOAD fails with error code
99.This happens when the table being loaded has a primary index and one or
more other index defined on it.
SYMPTOMS:
The Below error message is given during the online execution:
RCX1001E: RC/EXTRACT SQL LOAD INCOMPLETE.
RETCODE = 99
IMPACT:
You cannot perform the SQL LOAD.
CIRCUMVENTION:
Utility Load can be used.
PRODUCT(S) AFFECTED:
RC/Extract Release 17.0
RC/Extract Version 18.0
RC/Extract Version 19.0
Related Problem:
RCX 570
Copyright (C) 2015 CA. All rights reserved. R01163-D180-SP1
DESC(ERROR DURING SQL LOAD).
++VER (Z038)
FMID (CRCXI00)
SUP ( TR85583 )
CA DB2 Tools 18.0 89
CA RS 1511 - PTF RO85584 DetailsCA DB2 Tools 18.0 89
CA RS 1511 - PTF RO85584 Details
Release Service Details18.0 RO85584 RO85584 M.C.S. ENTRIES = ++PTF (RO85584)
U0047 FOLLOWED BY SC03 IN EXTENDED EXTRACT SQL DELETE
PROBLEM DESCRIPTION:
In CA RC/Extract for DB2 for z/OS(RCX), the SQL Delete for an EXTENDED
EXTRACT fails with U0047 error followed by SC03 abend.
SYMPTOMS:
The below abend occurs when an SQL Delete is attempted on an EXTENDED EXTRACT
IEF450I P$DBCA01 STEP1 - ABEND=SC03 U0000 REASON=00000000 401
ICE047A 1 RECORD COUNT OFF, SPECIFIED 1472 , RECEIVED 78065.
BPA0071E: CALLED PROGRAM RXL$SLEI ABENDED. ABEND CODE U0047 REASON CODE
00000000 - PROCESSING TERMINATES.
RETCODE = 20
IMPACT:
You cannot perform the SQL Delete operation for an EXTENDED EXTRACT.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
RC/Extract Release 17.0
RC/Extract Version 18.0
RC/Extract Version 19.0
Related Problem:
RCX 571
Copyright (C) 2015 CA. All rights reserved. R01164-D180-SP1
DESC(U0047 FOLLOWED BY SC03 IN EXTENDED EXTRACT SQL DELETE).
++VER (Z038)
FMID (CRCXI00)
PRE ( RO75425 )
SUP ( TR85584 )
CA DB2 Tools 18.0 90
CA RS 1511 - PTF RO85594 DetailsCA DB2 Tools 18.0 90
CA RS 1511 - PTF RO85594 Details
Release Service Details18.0 RO85594 RO85594 M.C.S. ENTRIES = ++PTF (RO85594)
TEMPORAL TABLE DROPPED AND CREATED WHEN RENAMING A COLUMN
PROBLEM DESCRIPTION:
Customer may experience two different problems when using RC/Migrator
for DB2 for z/OS (RCM) to rename a column of a temporal table.
Problem 1: The analysis will generate DDL to drop and create the
base table if the column is defined as 'TRANSACTION START ID'
or 'ROW BEGIN' or 'ROW END'.
Problem 2: The analysis generates DDL to rename the column of the
history table without generating DDL to drop the view
if the view references the history table.
SYMPTOMS:
The generated script will have drop and create DDL for the base table.
DDL to drop the view which references the history table will be missing.
IMPACT:
The execution of the generated script will unnecessarily unload and load
base table.
The execution of the alter table DDL to rename the column of the
history table will fail.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
RC/Migrator Release 17.0
RC/Migrator Version 18.0
RC/Migrator Version 19.0
Related Problem:
RCM 2738
Copyright (C) 2015 CA. All rights reserved. R01165-D180-SP1
DESC(TEMPORAL TABLE DROPPED AND CREATED WHEN RENAMING A COLUMN).
++VER (Z038)
FMID (CINSI00)
PRE ( RO74132 RO75326 RO76410 RO78051 )
SUP ( RO82505 TR82505 TR85594 )
CA DB2 Tools 18.0 91
CA RS 1511 - PTF RO85604 DetailsCA DB2 Tools 18.0 91
CA RS 1511 - PTF RO85604 Details
Release Service Details18.0 RO85604 RO85604 M.C.S. ENTRIES = ++PTF (RO85604)
COLLECTION TERMINATES AFTER 0C4 IN DT$DII
PROBLEM DESCRIPTION:
CA Detector for DB2 for z/OS (PDT) may stop collections after receiving
0C4 abends.
SYMPTOMS:
Messages similar to the following appear in the Xmanager joblog:
PDT0185 ABEND=S0C4 MODULE=DT$DII OFFSET=0000386C DB2=111
PDT0102 DETECTOR TERM IN PROGRESS FOR DB2=DBH2 USER=CONSOLE
PDT generates a SVC dump having a title similar to the following:
CA-DETECTOR 18.0 DIAG/DUMP ABEND=S0C4 MODULE=DT$DII
OFFSET=0000386C DB2=XXXX
IMPACT:
PDT collection terminates.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Detector for DB2 for z/OS Version 18.0
CA Detector for DB2 for z/OS Version 19.0
Related Problem:
PDT 1341
Copyright (C) 2015 CA. All rights reserved. R01166-D180-SP1
DESC(COLLECTION TERMINATES AFTER 0C4 IN DT$DII).
++VER (Z038)
FMID (CPDTI00)
PRE ( RO74470 RO75583 RO76368 RO76486 RO77248 RO77329
RO77520 RO78101 RO78446 RO78514 RO78682 RO79431
RO79574 RO79877 RO79934 RO80038 RO80194 RO80397
RO80869 RO80899 RO81196 RO82518 RO82587 RO82974
RO83776 RO84200 RO85468 )
SUP ( RO73552 RO74003 RO74580 RO84898 TR73552 TR74003
TR74580 TR74996 TR75133 TR75226 TR75241 TR75379
TR75436 TR75468 TR75494 TR75533 TR80527 TR80717
TR84898 TR85604 )
++HOLD (RO85604) SYSTEM FMID(CPDTI00)
REASON (RESTART) DATE (15288)
COMMENT (
+----------------------------------------------------------------------+
| CA Detector for DB2 for z/OS Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | Before Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | Avoidance of module mismatch related errors in an Xmanager|
+----------+-----------------------------------------------------------+
|USERS | Collections of DB2 statistics via Detector or Subsystem |
|AFFECTED | Analyzer. |
| | DB2 subsystems that have active collections. |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | 1. SMP/E |
|REQUIRED | 2. z/OS System Programming |
| | 3. CA DB2 Tools Installation and Maintenance procedures. |
+----------+-----------------------------------------------------------+
|ACCESS | 1. Product runtime libraries. |
|REQUIRED | |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
To implement the PTF:
1. Stop product collections.
2. Stop the Xmanager task.
3. Update the runtime library.
CA DB2 Tools 18.0 92
CA RS 1511 - PTF RO85604 Details
Release Service Details4. Restart the Xmanager task.
Important!
Please do not apply maintenance to the Xmanager runtime libraries with
Xmanager active as it may result in a discrepancy between
dynamically loaded components and statically loaded components.
This may result in unpredictable behavior with CA-DB2 tools and/or may
compromise the operating system/DB2 including possible failures.
).
CA DB2 Tools 18.0 93
CA RS 1511 - PTF RO85607 DetailsCA DB2 Tools 18.0 93
CA RS 1511 - PTF RO85607 Details
Release Service Details18.0 RO85607 RO85607 M.C.S. ENTRIES = ++PTF (RO85607)
RQ078E WITH FLDSTAT LINE COMMAND ON THE C-D REPORT
PROBLEM DESCRIPTION:
In CA RC/Query for DB2 for z/OS (RCQ), FLDSTAT line command does not work
from column detail(C-D) report.
SYMPTOMS:
Execution of the FLDSTAT line command from the C-D report ends with the
following error even though SYSCOLDIST holds the entry for the same columns.
RQ078E - COMMAND REQUESTED IS NOT VALID FOR SELECTED OBJECT
IMPACT:
You cannot use FLDSTAT command from C-D report.
CIRCUMVENTION:
None.
Related Problem:
RCQ 1490
Copyright (C) 2015 CA. All rights reserved. R01167-D180-SP1
DESC(RQ078E WITH FLDSTAT LINE COMMAND ON THE C-D REPORT).
++VER (Z038)
FMID (CINSI00)
PRE ( RO74957 RO75206 RO75312 RO82105 RO83825 )
SUP ( TR85042 TR85607 )
++IF FMID(CRCQI00) REQ(RO85608 ) .
CA DB2 Tools 18.0 94
CA RS 1511 - PTF RO85608 DetailsCA DB2 Tools 18.0 94
CA RS 1511 - PTF RO85608 Details
Release Service Details18.0 RO85608 RO85608 M.C.S. ENTRIES = ++PTF (RO85608)
RQ078E WITH FLDSTAT LINE COMMAND ON THE C-D REPORT
PROBLEM DESCRIPTION:
In CA RC/Query for DB2 for z/OS (RCQ), FLDSTAT line command does not work
from column detail(C-D) report.
SYMPTOMS:
Execution of the FLDSTAT line command from the C-D report ends with the
following error even though SYSCOLDIST holds the entry for the same columns.
RQ078E - COMMAND REQUESTED IS NOT VALID FOR SELECTED OBJECT
IMPACT:
You cannot use FLDSTAT command from C-D report.
CIRCUMVENTION:
None.
Related Problem:
RCQ 1490
Copyright (C) 2015 CA. All rights reserved. R01167-D180-SP1
DESC(RQ078E WITH FLDSTAT LINE COMMAND ON THE C-D REPORT).
++VER (Z038)
FMID (CRCQI00)
PRE ( RO74958 RO75207 RO85034 )
SUP ( TR85043 TR85608 )
++IF FMID(CINSI00) REQ(RO85607 ) .
CA DB2 Tools 18.0 95
CA RS 1511 - PTF RO85614 DetailsCA DB2 Tools 18.0 95
CA RS 1511 - PTF RO85614 Details
Release Service Details18.0 RO85614 RO85614 M.C.S. ENTRIES = ++PTF (RO85614)
ABEND S138 FOLLOWING ERROR IN HISTORY FILE INITIALIZATION
PROBLEM DESCRIPTION:
The CA SYSVIEW Performance Management Option for DB2 for z/OS (IDB2)
may fail during startup with an ABEND S138 if initialization of the
history task fails for any reason.
Additionally, the format of error message DBG21023E has been changed to
include a reason code:
DBG21023E ssid hh:mm:ss HISTORY: FILE histfile INVALID HISTORY FILE: reasoncd
SYMPTOMS:
CCSR010E NMSPRMVC S138 at 3CD92C9A LMOD NAINSLOG CSECT NUHSTLOM+4C9A
IEA794I SVC DUMP HAS CAPTURED: 924
DUMPID=166 REQUESTED BY JOB (IDCD11AS)
CCSR021I OWNER = CA SYSVIEW for DB2 R19.0
CCSR022I MODULE = NUHSTLOM FMID = CIDBJ00 RMID = RO85183
CCSR060I BREAKING EVENT ADDRESS: 00000000 0190097A
CCSR061I PSW: 07042001 80000000 00000000 3A84F2C6
CCSR062I ILC: 02 INTERRUPT CODE: 0D
CCSR067I COMPLETION CODE S138 REASON CODE 02470003
IMPACT:
The data collector is terminated and must be restarted.
CIRCUMVENTION:
Correct the underlying problem causing history initialization to
fail.
PRODUCT(S) AFFECTED:
CA Insight Database Performance Monitor for DB2 for z/OS Release 17.0
CA SYSVIEW Performance Management Option for DB2 for z/OS Version 18.0
CA SYSVIEW Performance Management Option for DB2 for z/OS Version 19.0
Related Problem:
IDB2 1905
Copyright (C) 2015 CA. All rights reserved. R01168-D180-SP1
DESC(ABEND S138 FOLLOWING ERROR IN HISTORY FILE INITIALIZATION).
++VER (Z038)
FMID (CIDBI00)
PRE ( RO73660 RO73925 RO74129 RO74677 RO74879 RO75439
RO75472 RO77226 RO78006 RO78828 RO78961 RO82325
RO83061 RO83708 RO83711 )
SUP ( RO75810 RO79219 RO81583 RO83466 RO85182 TR75810
TR79219 TR81583 TR83466 TR85182 TR85614 )
CA DB2 Tools 18.0 96
CA RS 1511 - PTF RO85626 DetailsCA DB2 Tools 18.0 96
CA RS 1511 - PTF RO85626 Details
Release Service Details18.0 RO85626 RO85626 M.C.S. ENTRIES = ++PTF (RO85626)
S0C4 S0C6 NO ACTIVE MODULE AFTER SUCCESSFUL LOAD
PROBLEM DESCRIPTION:
CA Fast Load for DB2 for z/OS (PFL) may experience an abend when it
is attempting to remove an ESTAE because of a corrupt control
block. With this solution Fast Load will detect the situation,
issue message PFL0746W and continue processing.
SYMPTOMS:
Various S0C4 and S0C6 abends may occur:
JOB05494 IEA995I SYMPTOM DUMP OUTPUT 551
SYSTEM COMPLETION CODE=0C4 REASON CODE=00000010
TIME=17.44.44 SEQ=00310 CPU=0000 ASID=0198
PSW AT TIME OF ERROR 070C0000 F86FC5F8 ILC 2 INTC 10
NO ACTIVE MODULE FOUND
NAME=UNKNOWN
DATA AT PSW IS UNAVAILABLE AT THIS TIME
JOB04074 IEA995I SYMPTOM DUMP OUTPUT 212
SYSTEM COMPLETION CODE=0C6 REASON CODE=00000006
TIME=16.17.34 SEQ=00177 CPU=0000 ASID=016F
PSW AT TIME OF ERROR 070C0000 F86FC4F5 ILC 2 INTC 06
NO ACTIVE MODULE FOUND
NAME=UNKNOWN
DATA AT PSW IS UNAVAILABLE AT THIS TIME
IMPACT:
Fast Load successfully completes but the job abends during cleanup.
The dynamic deallocation of datasets is not performed.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Fast Load for DB2 for z/OS Version 18.0
CA Fast Load for DB2 for z/OS Version 19.0
Related Problem:
PFL 1163
Copyright (C) 2015 CA. All rights reserved. R01169-D180-SP1
DESC(S0C4 S0C6 NO ACTIVE MODULE AFTER SUCCESSFUL LOAD).
++VER (Z038)
FMID (CPFLI00)
PRE ( RO73812 RO74758 RO75088 RO75158 RO76020 RO82027
RO82275 RO83928 RO85171 )
SUP ( TR85626 )
++IF FMID(CPUTI00) REQ(RO85627 ) .
++HOLD (RO85626) SYSTEM FMID(CPFLI00)
REASON (MSGSKEL) DATE (15292)
COMMENT (
+----------------------------------------------------------------------+
| CA Fast Load for DB2 for z/OS Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | After Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | Relink XMESSAGES |
+----------+-----------------------------------------------------------+
|USERS | |
|AFFECTED | All CA DB2 Tools Users |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | |
|REQUIRED | CA DB2 Tools Post Install Customization. |
+----------+-----------------------------------------------------------+
|ACCESS | 1. CA DB2 Tools Post Install |
|REQUIRED | 2. BIND Authority on DB2 subsystems |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
CA DB2 Tools 18.0 97
CA RS 1511 - PTF RO85626 Details
Release Service DetailsXMESSAGE components have changes as part of this maintenance.
If you do not customize XMESSAGES, no further action is required.
If you do customize XMESSAGES, after maintenance is APPLIED
1. Re-apply XMESSAGE customizations and relink XMESSAGE load modules.
Refer to the Post Installation and Customization Guide for details.
).
CA DB2 Tools 18.0 98
CA RS 1511 - PTF RO85627 DetailsCA DB2 Tools 18.0 98
CA RS 1511 - PTF RO85627 Details
Release Service Details18.0 RO85627 RO85627 M.C.S. ENTRIES = ++PTF (RO85627)
S0C4 S0C6 NO ACTIVE MODULE AFTER SUCCESSFUL LOAD
PROBLEM DESCRIPTION:
CA Fast Load for DB2 for z/OS (PFL) may experience an abend when it
is attempting to remove an ESTAE because of a corrupt control
block. With this solution Fast Load will detect the situation,
issue message PFL0746W and continue processing.
SYMPTOMS:
Various S0C4 and S0C6 abends may occur:
JOB05494 IEA995I SYMPTOM DUMP OUTPUT 551
SYSTEM COMPLETION CODE=0C4 REASON CODE=00000010
TIME=17.44.44 SEQ=00310 CPU=0000 ASID=0198
PSW AT TIME OF ERROR 070C0000 F86FC5F8 ILC 2 INTC 10
NO ACTIVE MODULE FOUND
NAME=UNKNOWN
DATA AT PSW IS UNAVAILABLE AT THIS TIME
JOB04074 IEA995I SYMPTOM DUMP OUTPUT 212
SYSTEM COMPLETION CODE=0C6 REASON CODE=00000006
TIME=16.17.34 SEQ=00177 CPU=0000 ASID=016F
PSW AT TIME OF ERROR 070C0000 F86FC4F5 ILC 2 INTC 06
NO ACTIVE MODULE FOUND
NAME=UNKNOWN
DATA AT PSW IS UNAVAILABLE AT THIS TIME
IMPACT:
Fast Load successfully completes but the job abends during cleanup.
The dynamic deallocation of datasets is not performed.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Fast Load for DB2 for z/OS Version 18.0
CA Fast Load for DB2 for z/OS Version 19.0
Related Problem:
PFL 1163
Copyright (C) 2015 CA. All rights reserved. R01169-D180-SP1
DESC(S0C4 S0C6 NO ACTIVE MODULE AFTER SUCCESSFUL LOAD).
++VER (Z038)
FMID (CPUTI00)
PRE ( RO82277 )
SUP ( TR85627 )
++IF FMID(CPFLI00) REQ(RO85626 ) .
CA DB2 Tools 18.0 99
CA RS 1511 - PTF RO85634 DetailsCA DB2 Tools 18.0 99
CA RS 1511 - PTF RO85634 Details
Release Service Details18.0 RO85634 RO85634 M.C.S. ENTRIES = ++PTF (RO85634)
SEMICOLON MISSING IN ALTER TABLESPACE DDL TO CHANGE LOCKPART
PROBLEM DESCRIPTION:
When CA RC/Migrator for DB2 for z/OS (RCM) generates DDL to alter the
LOCKPART of a tablespace, the ending semicolon(;) is missing from the
alter DDL.
SYMPTOMS:
The alter tablespace DDL will be without the ending semicolon(;).
The execution will end with sqlcode -104.
IMPACT:
Customer will not be able to alter the LOCKPART of the tablespace.
CIRCUMVENTION:
Edit the script and add a semicolon(;) at the end of the alter tablespace
DDL before executing the script.
PRODUCT(S) AFFECTED:
RC/Migrator Release 17.0
RC/Migrator Version 18.0
RC/Migrator Version 19.0
Related Problem:
RCM 2737
Copyright (C) 2015 CA. All rights reserved. R01170-D180-SP1
DESC(SEMICOLON MISSING IN ALTER TABLESPACE DDL TO CHANGE LOCKPART).
++VER (Z038)
FMID (CINSI00)
SUP ( RO73986 RO76209 RO76621 RO78409 TR73986 TR76209
TR76621 TR78409 TR85634 )
CA DB2 Tools 18.0 100
CA RS 1511 - PTF RO85637 DetailsCA DB2 Tools 18.0 100
CA RS 1511 - PTF RO85637 Details
Release Service Details18.0 RO85637 RO85637 M.C.S. ENTRIES = ++PTF (RO85637)
OBJECT IDENTIFICATION MESSAGE PFL0747I
ENHANCEMENT DESCRIPTION:
Identification of general tablespace and index characteristics has
increased in complexity with each release of DB2. CA Fast Load for
DB2 for z/OS will now issue message PFL0747I to display some of
these characteristics.
The following tablespace information will be displayed:
Tablespace type: Classic Segmented, Classic Partitioned, Partitioned by
Growth, or Partitioned by Range
SEGSIZE if greater than 0
Number of partitions if object is partitioned
Maximum number of partitions if applicable
Number of tables if greater than 1
The following index information will be displayed for each index:
CLUSTERED
PARTITIONED
The UNIQUERULE value of the index:
Unique, Enforce Constraint
Duplicates are allowed
Unique
Unique, primary index
Unique where not null
Unique, non-primary parent
Unique, ROWID gen-by-dflt
Unique, XML Values
Non-default values for the following attributes: COPY, PADDED, SPARSE,
COMPRESS and EXT-TYPE
PRODUCT(S) AFFECTED:
CA Fast Load for DB2 for z/OS Version 18.0
CA Fast Load for DB2 for z/OS Version 19.0
Related Problem:
PFL 1164
Copyright (C) 2015 CA. All rights reserved. R01171-D180-SP1
DESC(OBJECT IDENTIFICATION MESSAGE PFL0747I).
++VER (Z038)
FMID (CPFLI00)
PRE ( RO73812 RO74758 RO75088 RO75158 RO76020 RO77236
RO77345 RO79586 RO82027 RO82142 RO82275 RO83928
RO85023 RO85171 RO85626 )
SUP ( RO73432 TR73432 TR76799 TR85637 )
++HOLD (RO85637) SYSTEM FMID(CPFLI00)
REASON (MSGSKEL) DATE (15292)
COMMENT (
+----------------------------------------------------------------------+
| CA Fast Load for DB2 for z/OS Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | After Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | Relink XMESSAGES |
+----------+-----------------------------------------------------------+
|USERS | |
|AFFECTED | All CA DB2 Tools Users |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | |
|REQUIRED | CA DB2 Tools Post Install Customization. |
+----------+-----------------------------------------------------------+
|ACCESS | 1. CA DB2 Tools Post Install |
|REQUIRED | 2. BIND Authority on DB2 subsystems |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
CA DB2 Tools 18.0 101
CA RS 1511 - PTF RO85637 Details
Release Service Details**************************
XMESSAGE components have changes as part of this maintenance.
If you do not customize XMESSAGES, no further action is required.
If you do customize XMESSAGES, after maintenance is APPLIED
1. Re-apply XMESSAGE customizations and relink XMESSAGE load modules.
Refer to the Post Installation and Customization Guide for details.
).
CA DB2 Tools 18.0 102
CA RS 1511 - PTF RO85640 DetailsCA DB2 Tools 18.0 102
CA RS 1511 - PTF RO85640 Details
Release Service Details18.0 RO85640 RO85640 M.C.S. ENTRIES = ++PTF (RO85640)
INCORRECT DATA REPORTED FOR IFCIDS WITH REPEATING SECTIONS
PROBLEM DESCRIPTION:
The CA SYSVIEW Performance Management Option for DB2 for z/OS (IDB2)
may report incorrect data based on IQL declared fields when processing
an IFCID with a repeating section that has more than 256 occurrences.
SYMPTOMS:
Data reported are incorrect or incomplete.
IMPACT:
Invalid data reported.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA SYSVIEW Performance Management Option for DB2 for z/OS Version 19.0
CA SYSVIEW Performance Management Option for DB2 for z/OS Version 18.0
CA Insight Database Performance Monitor for DB2 for z/OS Release 17.0
CA Insight Database Performance Monitor for DB2 for z/OS Release 16.0
Related Problem:
IDB2 1902
Copyright (C) 2015 CA. All rights reserved. R01172-D180-SP1
DESC(INCORRECT DATA REPORTED FOR IFCIDS WITH REPEATING SECTIONS).
++VER (Z038)
FMID (CIDBI00)
PRE ( RO74677 RO74879 RO75439 RO78961 )
SUP ( RO74496 TR74496 TR85358 TR85640 )
CA DB2 Tools 18.0 103
CA RS 1511 - PTF RO85654 DetailsCA DB2 Tools 18.0 103
CA RS 1511 - PTF RO85654 Details
Release Service Details18.0 RO85654 RO85654 M.C.S. ENTRIES = ++PTF (RO85654)
FALSE ALTER TABLE ADD COLUMN ENTRY IN DDL REPORT OR SQL
PROBLEM DESCRIPTION:
CA Log Analyzer for DB2 for z/OS (PLA) may report false ALTER TABLE ADD
COLUMN statements even if no such activity occurred. The problem is caused by
a coincidence of several factors, so it occurs in seemingly random cases, but
always when SYSIBM.SYSCOLUMNS table gets updated. For example when a RUNSTATS
utility was run, or a COMMENT ON COLUMN sql statement was issued.
SYMPTOMS:
DDL object report contain false entries related to ALTER TABLE ADD COLUMN
statement.
IMPACT:
Generated DDL object report is inaccurate.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Log Analyzer for DB2 for z/OS Release 19.0
CA Log Analyzer for DB2 for z/OS Release 18.0
CA Log Analyzer for DB2 for z/OS Release 17.0
Related Problem:
PLA 1203
Copyright (C) 2015 CA. All rights reserved. R01173-D180-SP1
DESC(FALSE ALTER TABLE ADD COLUMN ENTRY IN DDL REPORT OR SQL).
++VER (Z038)
FMID (CPLAI00)
PRE ( RO73663 RO74232 )
SUP ( TR85654 )
CA DB2 Tools 18.0 104
CA RS 1511 - PTF RO85665 DetailsCA DB2 Tools 18.0 104
CA RS 1511 - PTF RO85665 Details
Release Service Details18.0 RO85665 RO85665 M.C.S. ENTRIES = ++PTF (RO85665)
RM005E HELP PANEL DOES NOT SAY REGION SIZE BEING SMALL.
PROBLEM DESCRIPTION:
CA RC/Compare for DB2 for z/OS (RCC) may issue RM005E message when
the requested region size is too small. When the customer increases the
region size, the RM005E message may disappear. But the help panel RM005E
does not say anything about the region size.
SYMPTOMS:
RM005E help panel message does not say anything about the region size
being one of the reasons for RM005E message.
IMPACT:
Customer does not know that the region size needs to be increased.
CIRCUMVENTION:
Increase the region size.
PRODUCT(S) AFFECTED:
RC/Migrator Release 17.0
RC/Migrator Version 18.0
RC/Migrator Version 19.0
Related Problem:
RCC 664
Copyright (C) 2015 CA. All rights reserved. R01174-D180-SP1
DESC(RM005E HELP PANEL DOES NOT SAY REGION SIZE BEING SMALL.).
++VER (Z038)
FMID (CRCMI00)
SUP ( TR85665 )
CA DB2 Tools 18.0 105
CA RS 1511 - PTF RO85679 DetailsCA DB2 Tools 18.0 105
CA RS 1511 - PTF RO85679 Details
Release Service Details18.0 RO85679 RO85679 M.C.S. ENTRIES = ++PTF (RO85679)
RC=16 ON COPY WHEN SHRLVL NS/R AND SSID DIFFERENT DB2 VERSIO
PROBLEM DESCRIPTION:
CA RC/Migrator for DB2 for z/OS (RCM) , when executing an RC/Merger (RMM)
copy or data only copy analysis on a partitioned object where the source
and target reside on different DB2 versions and sharelevel is set to NS/R,
the job fails with RC=16.
SYMPTOMS:
The job fails with RC=16 without displaying any error message.
IMPACT:
You cannot analyse a copy or data only copy analysis successfully.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
RC/Migrator Release 17.0
RC/Migrator Release 18.0
RC/Migrator Release 19.0
Related Problem:
RMM 202
Copyright (C) 2015 CA. All rights reserved. R01175-D180-SP1
DESC(RC=16 ON COPY WHEN SHRLVL NS/R AND SSID DIFFERENT DB2 VERSIO).
++VER (Z038)
FMID (CINSI00)
PRE ( RO75319 RO83587 RO84941 RO85050 RO85397 )
SUP ( RO84719 TR84678 TR84719 TR85679 )
CA DB2 Tools 18.0 106
CA RS 1511 - PTF RO85686 DetailsCA DB2 Tools 18.0 106
CA RS 1511 - PTF RO85686 Details
Release Service Details18.0 RO85686 RO85686 M.C.S. ENTRIES = ++PTF (RO85686)
PSABATCH UNLOAD CAUSES DATASTORE COMPATIBILITY ERROR
PROBLEM DESCRIPTION:
When using the CA Subsystem Analyzer for DB2 for z/OS Batch Report and/or
Unload the job fails due with Datastore compatibility error messages.
SYMPTOMS:
Occurrence of PXM2002 followed by PSA0312, PSA0356, and PXM2001.
IMPACT:
The PSABATCH job fails with a non-zero return code and has to be restarted
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
Subsystem Analyzer Release 16.0
Subsystem Analyzer Release 17.0
Subsystem Analyzer Version 18.0
Subsystem Analyzer Version 19.0
Related Problem:
PSA 454
Copyright (C) 2015 CA. All rights reserved. R01176-D180-SP1
DESC(PSABATCH UNLOAD CAUSES DATASTORE COMPATIBILITY ERROR).
++VER (Z038)
FMID (CPSAI00)
PRE ( RO73433 RO73932 )
SUP ( TR85686 )
++HOLD (RO85686) SYSTEM FMID(CPSAI00)
REASON (RESTART) DATE (15292)
COMMENT (
+----------------------------------------------------------------------+
| CA Subsystem Analyzer for DB2 for z/OS Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | Before Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | Avoidance of module mismatch related errors in an Xmanager|
+----------+-----------------------------------------------------------+
|USERS | Collections of DB2 statistics via Detector or Subsystem |
|AFFECTED | Analyzer. |
| | DB2 subsystems that have active collections. |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | 1. SMP/E |
|REQUIRED | 2. z/OS System Programming |
| | 3. CA DB2 Tools Installation and Maintenance procedures. |
+----------+-----------------------------------------------------------+
|ACCESS | 1. Product runtime libraries. |
|REQUIRED | |
+----------+-----------------------------------------------------------+
| | |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
To implement the PTF:
1. Stop product collections.
2. Stop the Xmanager task.
3. Update the runtime library.
4. Restart the Xmanager task.
Note:
DO NOT apply maintenance to the Xmanager runtime libraries with
Xmanager active as it may result in a discrepancy between dynamically
loaded components and statically loaded components. This may result in
unpredictable behavior with CA-DB2 tools and/or compromise the
operating system/DB2 including possible failure.
).
CA DB2 Tools 18.0 107
CA RS 1511 - PTF RO85696 DetailsCA DB2 Tools 18.0 107
CA RS 1511 - PTF RO85696 Details
Release Service Details18.0 RO85696 RO85696 M.C.S. ENTRIES = ++PTF (RO85696)
CMG999 - RM632E MESSAGE NOT FOUND IN 'ISPMLIB' LIBRARY
PROBLEM DESCRIPTION:
When creating a migration strategy using CA RC/Migrator for DB2
for Z/OS (RCM), you may experience an ISPF dialog error if the following
conditions are true:
1) The primary object should include at least two different dependent
object types in the hierarchy.
2) An invalid implode/explode option is used for the first dependent
object in the hierarchy.
3) Implode/Explode option 'S' is used to select the second dependent
object.
4) After selecting the second dependent object, hit PF3.
SYMPTOMS:
CMG999
Message RM632E
RM632E message not found in 'ISPMLIB' library.
IMPACT:
Customer will not be able to save the strategy.
CIRCUMVENTION:
Create a new strategy and use valid Implode/Explode options.
PRODUCT(S) AFFECTED:
RC/Migrator Release 17.0
RC/Migrator Version 18.0
RC/Migrator Version 19.0
Related Problem:
RCM 2742
Copyright (C) 2015 CA. All rights reserved. R01177-D180-SP1
DESC(CMG999 - RM632E MESSAGE NOT FOUND IN 'ISPMLIB' LIBRARY).
++VER (Z038)
FMID (CINSI00)
SUP ( TR85696 )
CA DB2 Tools 18.0 108
CA RS 1511 - PTF RO85707 DetailsCA DB2 Tools 18.0 108
CA RS 1511 - PTF RO85707 Details
Release Service Details18.0 RO85707 RO85707 M.C.S. ENTRIES = ++PTF (RO85707)
PBG GROWING ABEND S13E PUT9807E RC 8 RSN 02000000
PROBLEM DESCRIPTION:
When CA Fast Load for DB2 for z/OS (PFL) attempts to grow a Partition
By Growth (PBG) tablespace, a partition instantiation
can fail with a return code 8 and reason code 02000000.
SYMPTOMS:
When PFL attempts to grow a PBG tablespace, a partition instantiation
can fail with a return code 08 and reason code 02000000. The data sets
do not load.
Below is an example of the output received:
PUT9807E - Partition instantiation for a Partition By Growth Tablespace
failed.
Part number: 0002, Return Code: 08, Reason Code: 02000000
PFL1201W - Number of pages exceeds maximum allowed for partition 00001
Load will Continue or End depending on DISCARDS value
PFL3019E - ESTAE intercepted in CSECT FLAUTS1 - ABEND code X'840C4000'
PFL0206E - FASTLOAD application did not complete successfully
PFL0207E - T_Space Task ECB: X'000C4000' Return Code: X'00000004'
PFL2104E - CSECT: FLAUIX4 Abended, Code: X'0013E000' - ESTAE
Intercepted
PFL0212E - Data sets did not load successfully
IMPACT:
The job will abend with S13E. The data sets will not load successfully.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Fast Load for DB2 for z/OS Version 18.0
CA Fast Load for DB2 for z/OS Version 19.0
Related Problem:
PFL 1156
Copyright (C) 2015 CA. All rights reserved. R01178-D180-SP1
DESC(PBG GROWING ABEND S13E PUT9807E RC 8 RSN 02000000).
++VER (Z038)
FMID (CPFLI00)
PRE ( RO74758 RO75158 RO76020 RO76399 RO77503 RO79586
RO82142 RO82275 RO83928 )
SUP ( TR75998 TR77032 TR77037 TR85707 )
++IF FMID(CPFUI00) REQ(RO85708 ) .
++IF FMID(CPUTI00) REQ(RO85709 ) .
CA DB2 Tools 18.0 109
CA RS 1511 - PTF RO85708 DetailsCA DB2 Tools 18.0 109
CA RS 1511 - PTF RO85708 Details
Release Service Details18.0 RO85708 RO85708 M.C.S. ENTRIES = ++PTF (RO85708)
PBG GROWING ABEND S13E PUT9807E RC 8 RSN 02000000
PROBLEM DESCRIPTION:
When CA Fast Load for DB2 for z/OS (PFL) attempts to grow a Partition
By Growth (PBG) tablespace, a partition instantiation
can fail with a return code 8 and reason code 02000000.
SYMPTOMS:
When PFL attempts to grow a PBG tablespace, a partition instantiation
can fail with a return code 08 and reason code 02000000. The data sets
do not load.
Below is an example of the output received:
PUT9807E - Partition instantiation for a Partition By Growth Tablespace
failed.
Part number: 0002, Return Code: 08, Reason Code: 02000000
PFL1201W - Number of pages exceeds maximum allowed for partition 00001
Load will Continue or End depending on DISCARDS value
PFL3019E - ESTAE intercepted in CSECT FLAUTS1 - ABEND code X'840C4000'
PFL0206E - FASTLOAD application did not complete successfully
PFL0207E - T_Space Task ECB: X'000C4000' Return Code: X'00000004'
PFL2104E - CSECT: FLAUIX4 Abended, Code: X'0013E000' - ESTAE
Intercepted
PFL0212E - Data sets did not load successfully
IMPACT:
The job will abend with S13E. The data sets will not load successfully.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Fast Load for DB2 for z/OS Version 18.0
CA Fast Load for DB2 for z/OS Version 19.0
Related Problem:
PFL 1156
Copyright (C) 2015 CA. All rights reserved. R01178-D180-SP1
DESC(PBG GROWING ABEND S13E PUT9807E RC 8 RSN 02000000).
++VER (Z038)
FMID (CPFUI00)
PRE ( RO73618 RO73751 RO73974 RO74303 RO74533 RO74618
RO75160 RO77504 RO78859 RO79248 RO80890 RO82436
RO82899 RO84292 )
SUP ( RO75430 RO76686 TR74336 TR74987 TR75098 TR75430
TR75999 TR76592 TR76686 TR77033 TR77038 TR85708 )
++IF FMID(CPUTI00) REQ(RO85709 ) .
++IF FMID(CPFLI00) REQ(RO85707 ) .
CA DB2 Tools 18.0 110
CA RS 1511 - PTF RO85709 DetailsCA DB2 Tools 18.0 110
CA RS 1511 - PTF RO85709 Details
Release Service Details18.0 RO85709 RO85709 M.C.S. ENTRIES = ++PTF (RO85709)
PBG GROWING ABEND S13E PUT9807E RC 8 RSN 02000000
PROBLEM DESCRIPTION:
When CA Fast Load for DB2 for z/OS (PFL) attempts to grow a Partition
By Growth (PBG) tablespace, a partition instantiation
can fail with a return code 8 and reason code 02000000.
SYMPTOMS:
When PFL attempts to grow a PBG tablespace, a partition instantiation
can fail with a return code 08 and reason code 02000000. The data sets
do not load.
Below is an example of the output received:
PUT9807E - Partition instantiation for a Partition By Growth Tablespace
failed.
Part number: 0002, Return Code: 08, Reason Code: 02000000
PFL1201W - Number of pages exceeds maximum allowed for partition 00001
Load will Continue or End depending on DISCARDS value
PFL3019E - ESTAE intercepted in CSECT FLAUTS1 - ABEND code X'840C4000'
PFL0206E - FASTLOAD application did not complete successfully
PFL0207E - T_Space Task ECB: X'000C4000' Return Code: X'00000004'
PFL2104E - CSECT: FLAUIX4 Abended, Code: X'0013E000' - ESTAE
Intercepted
PFL0212E - Data sets did not load successfully
IMPACT:
The job will abend with S13E. The data sets will not load successfully.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Fast Load for DB2 for z/OS Version 18.0
CA Fast Load for DB2 for z/OS Version 19.0
Related Problem:
PFL 1156
Copyright (C) 2015 CA. All rights reserved. R01178-D180-SP1
DESC(PBG GROWING ABEND S13E PUT9807E RC 8 RSN 02000000).
++VER (Z038)
FMID (CPUTI00)
PRE ( RO75162 RO75346 RO76023 RO76036 RO77234 RO77505
RO80960 RO82008 RO82144 RO82277 RO82878 RO83394
RO83930 )
SUP ( RO83945 TR83945 TR85709 )
++IF FMID(CPFUI00) REQ(RO85708 ) .
++IF FMID(CPFLI00) REQ(RO85707 ) .
CA DB2 Tools 18.0 111
CA RS 1511 - PTF RO85710 DetailsCA DB2 Tools 18.0 111
CA RS 1511 - PTF RO85710 Details
Release Service Details18.0 RO85710 RO85710 M.C.S. ENTRIES = ++PTF (RO85710)
DROP & ADD VERSIONING GENERATED WHEN TEMPORAL TBLS COMPARED
PROBLEM DESCRIPTION:
CA RC/Migrator for DB2 for z/OS (RCC) generates DDL to drop and add
versioning when two identical SYSTEM PERIOD temporal tables with different
creators are compared.
SYMPTOMS:
DDL to drop and add versioning are generated when there are no changes
between the source and target base tables.
IMPACT:
The execution will unnecessarily drop and add versioning.
CIRCUMVENTION:
Do not execute the script.
PRODUCT(S) AFFECTED:
RC/Migrator Release 17.0
RC/Migrator Version 18.0
RC/Migrator Version 19.0
Related Problem:
RCC 663
Copyright (C) 2015 CA. All rights reserved. R01179-D180-SP1
DESC(DROP & ADD VERSIONING GENERATED WHEN TEMPORAL TBLS COMPARED).
++VER (Z038)
FMID (CINSI00)
PRE ( RO73682 )
SUP ( TR85710 )
CA DB2 Tools 18.0 112
CA RS 1511 - PTF RO85734 DetailsCA DB2 Tools 18.0 112
CA RS 1511 - PTF RO85734 Details
Release Service Details18.0 RO85734 RO85734 M.C.S. ENTRIES = ++PTF (RO85734)
PFR0688E WHEN ONE TABLE IN TABLE SPACE
PROBLEM DESCRIPTION:
CA Fast Recover for DB2 for z/OS (PFR) may fail when OBIDXLAT is performed
on a tablespace that contains or did contain more than one table.
SYMPTOMS:
The following message is issued:
PFR0688E DUE TO HPGTBLC > 1, OBIDXLAT SYNTAX USING OLD-OBID,NEW-OBID
MUST BE ENTERED FOR OBJECT '&DB..&TS.'
IMPACT:
The OBIDXLAT processing with automatic OBID translation (source and target
OBID not specified in the SYSIN) cannot be used for a tablespace that
currently contains only one table, but contained more tables in the past.
CIRCUMVENTION:
Specify source and target OBID in the SYSIN.
PRODUCT(S) AFFECTED:
Fast Recover Release 15.0
Fast Recover Release 16.0
Fast Recover Release 17.0
Related Problem:
PFR 918
Copyright (C) 2015 CA. All rights reserved. R01182-D180-SP1
DESC(PFR0688E WHEN ONE TABLE IN TABLE SPACE).
++VER (Z038)
FMID (CUGRI00)
PRE ( RO73869 RO74954 RO78711 )
SUP ( RO74130 RO83262 TR73206 TR73418 TR74130 TR83262
TR85734 )
CA DB2 Tools 18.0 113
CA RS 1511 - PTF RO85758 DetailsCA DB2 Tools 18.0 113
CA RS 1511 - PTF RO85758 Details
Release Service Details18.0 RO85758 RO85758 M.C.S. ENTRIES = ++PTF (RO85758)
IDB2UIFI DBG73106E FILE ALREADY LOADED WHEN FILE IS EMPTY
PROBLEM DESCRIPTION:
The CA SYSVIEW Performance Management Option for DB2 for z/OS (IDB2)
history file LOAD/UNLOAD utility IDB2UIFI will get error message
DBG73106E FILE ALREADY LOADED even though the output file is empty.
The utility may also get error DBG21022E FILE INIT FAILED - FILE TOO
SMALL if the input parms to the utility specify that a LOAD is to be
done, but UNLOAD parms such as UNLD and UNLDTYP are also coded.
SYMPTOMS:
DBG73106E 04:40:37 HISTSTAT FILE ALREADY LOADED
DBG21022E 04:40:37 HISTORY:
FILE HISTACCT INITIALIZATION FAILED. FILE IS TOO SMALL
IMPACT:
The LOAD utility cannot load the LDS history file.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA SYSVIEW Performance Management Option for DB2 for z/OS Version 18.0
CA SYSVIEW Performance Management Option for DB2 for z/OS Version 19.0
CA Insight Database Performance Monitor for DB2 for z/OS Release 17.0
Related Problem:
IDB2 1907
Copyright (C) 2015 CA. All rights reserved. R01183-D180-SP1
DESC(IDB2UIFI DBG73106E FILE ALREADY LOADED WHEN FILE IS EMPTY).
++VER (Z038)
FMID (CIDBI00)
PRE ( RO74677 RO74879 RO75439 RO78961 RO83185 RO83711 )
SUP ( AR83711 TR85758 )
CA DB2 Tools 18.0 114
CA RS 1511 - PTF RO85759 DetailsCA DB2 Tools 18.0 114
CA RS 1511 - PTF RO85759 Details
Release Service Details18.0 RO85759 RO85759 M.C.S. ENTRIES = ++PTF (RO85759)
NO DATA SCREEN AFTER PICK WITH INVALID SSID
PROBLEM DESCRIPTION:
The CA SYSVIEW Performance Management Option for DB2 for z/OS (IDB2) User
interface displays No data screen when the PICK command is called with
an invalid subsystem name from the THRDACTV screen (Active threads).
SYMPTOMS:
No data screen is displayed instead of the list of active threads.
IMPACT:
The user interface claims there are no threads running.
CIRCUMVENTION:
Reload the screen by pressing ENTER.
PRODUCT(S) AFFECTED:
CA SYSVIEW Performance Management Option for DB2 for z/OS Release 19.0
CA SYSVIEW Performance Management Option for DB2 for z/OS Release 18.0
CA Insight Database Performance Monitor for DB2 for z/OS Release 17.0
CA Insight Database Performance Monitor for DB2 for z/OS Release 16.0
Related Problem:
IDB2 1908
Copyright (C) 2015 CA. All rights reserved. R01184-D180-SP1
DESC(NO DATA SCREEN AFTER PICK WITH INVALID SSID).
++VER (Z038)
FMID (CIDBI00)
PRE ( RO73660 RO74463 RO74677 RO74826 RO74879 RO75101
RO75381 RO75439 RO75508 RO78961 RO80610 RO81060
RO82325 RO84357 )
SUP ( RO74286 RO75071 RO75137 RO80242 RO81720 RO84818
TR74286 TR75071 TR75137 TR80242 TR81720 TR84818
TR85759 )
CA DB2 Tools 18.0 115
CA RS 1511 - PTF RO85821 DetailsCA DB2 Tools 18.0 115
CA RS 1511 - PTF RO85821 Details
Release Service Details18.0 RO85821 RO85821 M.C.S. ENTRIES = ++PTF (RO85821)
DYN_TEXT_TOKEN IN PDT_STANTEXT TABLE CONTAINS SPACES
PROBLEM DESCRIPTION:
When loading data from the sysrec file into CA Detector for DB2 for z/OS
(PDT) history tables, the load control cards for the PDT_STANTEXT table
specify the wrong position for the DYN_TEXT_TOKEN column. This field can be
used to join the dynamic SQL text information with the standard activity data
in the PDT_STANDARD table.
SYMPTOMS:
When viewing records in the PDT_STANTEXT table with a RECTYPE of "DTXT", the
DYN_TEXT_TOKEN column contains EBCIDIC spaces.
IMPACT:
Does not allow the PDT_STANTEXT table to be joined with other PDT history
tables using that column.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Detector for DB2 for z/OS Version 18.0
CA Detector for DB2 for z/OS Version 19.0
Related Problem:
PDT 1345
Copyright (C) 2015 CA. All rights reserved. R01186-D180-SP1
DESC(DYN_TEXT_TOKEN IN PDT_STANTEXT TABLE CONTAINS SPACES).
++VER (Z038)
FMID (CPDTI00)
SUP ( TR85821 )
CA DB2 Tools 18.0 116
CA RS 1511 - PTF RO85854 DetailsCA DB2 Tools 18.0 116
CA RS 1511 - PTF RO85854 Details
Release Service Details18.0 RO85854 RO85854 M.C.S. ENTRIES = ++PTF (RO85854)
PFR0221E EXISTING OBID FOUND WITHOUT NEW OBID
PROBLEM DESCRIPTION:
CA Fast Recover for DB2 for z/OS (PFR) ends with RC=8 executing
RECOVER TABLESPACE OBIDXLAT and only 1 table exists in the tablespace.
The HPGTBLC field of FULLDD header page is > 1 and there is no
OLD-OBID,NEW-OBID specified in PFR SYSIN OBIDXLAT.
Message PFR0221E - EXISTING OBID(S) X'zzzz' FOUND WITHOUT NEW OBID
is written out.
SYMPTOMS:
PFR step ends with RC=8.
PTIMSG shows message
PFR0221E - EXISTING OBID(S) X'zzzz'
FOUND WITHOUT SPECIFIED NEW OBID(S)
IN TABLESPACE 'DB1.TS1'
IMPACT:
The object is not recovered/rebuilt correctly and is not usable.
CIRCUMVENTION:
Specify the OLD-OBID and NEW-OBID values in the PFR OBIDXLAT step.
PRODUCT(S) AFFECTED:
Utility General Recovery and PFR PMM PQC PFC Release 17.0
Utility General Recovery and PFR PMM PQC PFC Version 18.0
Utility General Recovery and PFR PMM PQC PFC Version 19.0
Related Problem:
PFR 954
Copyright (C) 2015 CA. All rights reserved. R01188-D180-SP1
DESC(PFR0221E EXISTING OBID FOUND WITHOUT NEW OBID).
++VER (Z038)
FMID (CUGRI00)
PRE ( RO74491 RO74954 RO78617 RO82278 RO85294 )
SUP ( TR85854 )
CA DB2 Tools 18.0 117
CA RS 1511 - PTF RO85856 DetailsCA DB2 Tools 18.0 117
CA RS 1511 - PTF RO85856 Details
Release Service Details18.0 RO85856 RO85856 M.C.S. ENTRIES = ++PTF (RO85856)
COLUMN FILTERS CANNOT BE TURNED ON
PROBLEM DESCRIPTION:
The CA SYSVIEW Performance Management Option for DB2 for z/OS (IDB2) User
Interface may not display the column filters on some tabular reports. The
problem occurs when the IQL request layout has changed since the user last
used the SORT command.
SYMPTOMS:
The column headers on the affected screen contain dashes (-) instead of the
filter input fields. Using the "FILTER" or "FILTER ON" commands has no
effect.
IMPACT:
Column filtering feature is not available on some screens.
CIRCUMVENTION:
Navigate to the affected screen and issue command "SORT OFF". Press ENTER to
refresh the screen.
PRODUCT(S) AFFECTED:
CA SYSVIEW Performance Management Option for DB2 for z/OS Release 19.0
CA SYSVIEW Performance Management Option for DB2 for z/OS Release 18.0
Related Problem:
IDB2 1898
Copyright (C) 2015 CA. All rights reserved. R01189-D180-SP1
DESC(COLUMN FILTERS CANNOT BE TURNED ON).
++VER (Z038)
FMID (CIDBI00)
PRE ( RO73660 RO74463 RO74677 RO74826 RO74879 RO75101
RO75381 RO75439 RO75508 RO78961 RO80610 RO81060
RO82325 RO84357 RO85759 )
SUP ( RO74286 RO75071 RO75137 RO80242 RO84818 TR74286
TR75071 TR75137 TR80242 TR84818 TR85856 )
CA DB2 Tools 18.0 118
CA RS 1511 - PTF RO85859 DetailsCA DB2 Tools 18.0 118
CA RS 1511 - PTF RO85859 Details
Release Service Details18.0 RO85859 RO85859 M.C.S. ENTRIES = ++PTF (RO85859)
VERSION MISMATCH BETWEEN BSDS AND DB2 RELEASE
PROBLEM DESCRIPTION:
CA Recovery Analyzer for DB2 for z/OS (PRA) fails to run ssid@CDC recovery
job on a migrated V11 NFM DB2 subsystem with BSDS converted to extended RBA
by the DSNJCNVT utility.
SYMPTOMS:
The ssid@CDC job abends in the ARCHLOG step. The following messages appear
in the joblog:
RAE00123: Program PRA#ARCL abnormally terminating.
GEN0301E Version mismatch between the BSDS and the DB2 release.
DB2 version:
BSDS version: 11
DSN: bsds.dsname
Cannot process BSDS, program aborting.
IMPACT:
Archive logs are not created and restore jobs are not generated for the
disaster recovery strategy.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Recovery Analyzer for DB2 for z/OS Version 18.0
CA Recovery Analyzer for DB2 for z/OS Version 19.0
Related Problem:
PRA 853
Copyright (C) 2015 CA. All rights reserved. R01190-D180-SP1
DESC(VERSION MISMATCH BETWEEN BSDS AND DB2 RELEASE).
++VER (Z038)
FMID (CPRAI00)
PRE ( RO82069 )
SUP ( TR85859 )
CA DB2 Tools 18.0 119
CA RS 1511 - PTF RO85894 DetailsCA DB2 Tools 18.0 119
CA RS 1511 - PTF RO85894 Details
Release Service Details18.0 RO85894 RO85894 M.C.S. ENTRIES = ++PTF (RO85894)
ONE CHARACTER CREATOR OR OBJECT ISSUE/S0C1/SQL -311
PROBLEM DESCRIPTION:
In CA RI Manager for DB2 for z/OS (PRI)
1.
When trying to add a child to a table with one character creator name or one
character table name, the column list for selection is not displayed.
2.
When trying to create a user defined RI, SQL ERROR -311 occurs after
selecting the foreign keys.
3.
When trying to create a user defined RI, S0C1 is encountered after
selecting the foreign keys.
4.
When trying to create a system RI, if the table is with one character creator
name or one character table name, the DDL generated for execution does not
have the creator name.
SYMPTOMS:
Below messages are displayed :
1.
None.
2.
DSNT408I SQLCODE = -311, ERROR: THE LENGTH OF INPUT HOST VARIABLE
NUMBER 001 IS NEGATIVE OR GREATER THAN THE MAXIMUM
3.
IEA995I SYMPTOM DUMP OUTPUT
SYSTEM COMPLETION CODE=0C1 REASON CODE=00000001
4.
None.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
PRI Release 18.0
PRI Version 19.0
Related Problem:
PRI 82
Copyright (C) 2015 CA. All rights reserved. R01192-D180-SP1
DESC(ONE CHARACTER CREATOR OR OBJECT ISSUE/S0C1/SQL -311).
++VER (Z038)
FMID (CINSI00)
PRE ( RO75302 RO75316 RO82105 )
SUP ( TR85894 )
CA DB2 Tools 18.0 120
CA RS 1511 - PTF RO85922 DetailsCA DB2 Tools 18.0 120
CA RS 1511 - PTF RO85922 Details
Release Service Details18.0 RO85922 RO85922 M.C.S. ENTRIES = ++PTF (RO85922)
SQL ERROR WHEN UPDATING A TABLE WITH VARYING LENGTH IX NAMES
PROBLEM DESCRIPTION:
CA Fast Load for DB2 for z/OS (PFL) can run into an SQL Error when a table
in a DEFINE NO tablespace has multiple indexes that have names with
different lengths.
SYMPTOMS:
PFL will issue an SQL error message followed by the SQL that was attempted to
be executed. This may look like the following:
PUT0701E - An SQL error has occurred:
DSNT408I SQLCODE = -104, ERROR: ILLEGAL SYMBOL "BWGCAWD1". SOME
SYMBOLS THAT MIGHT BE LEGAL ARE: AT MICROSECONDS MICROSECOND
SECONDS SECOND MINUTES MINUTE HOU
DSNT418I SQLSTATE = 42601 SQLSTATE RETURN CODE
DSNT415I SQLERRP = DSNHPARS SQL PROCEDURE DETECTING ERROR
DSNT416I SQLERRD = 3 0 0 -1 205 502 SQL DIAGNOSTIC INFORMATION
DSNT416I SQLERRD = X'00000003' X'00000000' X'00000000'
X'FFFFFFFF' X'000000CD' X'000001F6' SQL DIAGNOSTIC
INFORMATION
UPDATE SYSIBM.SYSINDEXPART SET SPACE = 0 WHERE IXNAME = 'xxxxxxx''
AND IXCREATOR = 'yyyyyyyy'
AND PARTITION = 00000
IMPACT:
Error message PUT0701E/SQLCODE -104 will be issued, and the program will
terminate processing with an RC=16.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Fast Load for DB2 for z/OS Version 17.0
0
Related Problem:
PFL 1160
Copyright (C) 2015 CA. All rights reserved. R01196-D180-SP1
DESC(SQL ERROR WHEN UPDATING A TABLE WITH VARYING LENGTH IX NAMES).
++VER (Z038)
FMID (CPFLI00)
PRE ( RO75158 RO77503 RO82142 RO82275 RO83928 RO85707 )
SUP ( TR85922 )
CA DB2 Tools 18.0 121
CA RS 1511 - PTF RO85926 DetailsCA DB2 Tools 18.0 121
CA RS 1511 - PTF RO85926 Details
Release Service Details18.0 RO85926 RO85926 M.C.S. ENTRIES = ++PTF (RO85926)
ENH: PAD SAAS UNLOAD
ENHANCEMENT DESCRIPTION:
Allow CA Performance Analytics for DB2 (PAD) to unload CA Detector for
DB2 for z/OS datastore data for upload to SaaS version of PAD.
PRODUCT(S) AFFECTED:
CA Detector for DB2 for z/OS Release 17.0
CA Detector for DB2 for z/OS Version 18.0
CA Detector for DB2 for z/OS Version 19.0
Related Problem:
PDT 1328
Copyright (C) 2015 CA. All rights reserved. R01197-D180-SP1
DESC(ENH: PAD SAAS UNLOAD).
++VER (Z038)
FMID (CINSI00)
PRE ( RO83358 RO84444 )
SUP ( TR85895 TR85926 )
CA DB2 Tools 18.0 122
CA RS 1511 - PTF RO85941 DetailsCA DB2 Tools 18.0 122
CA RS 1511 - PTF RO85941 Details
Release Service Details18.0 RO85941 RO85941 M.C.S. ENTRIES = ++PTF (RO85941)
ABEND S0C4 IN UTL#SYM WHEN USING TEMPLATE TO ALLOCATE COPIES
PROBLEM DESCRIPTION:
When CA Quick Copy for DB2 for z/OS (PQC) uses TEMPLATE to dynamically
allocate image copies, an S0C4 ABEND may occur in module UTL#SYM.
SYMPTOMS:
ABEND S0C4 occurs in module UTL#SYM.
IMPACT:
Creation of dynamically allocated image copy fails.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA Quick Copy Version 17.0
CA Quick Copy Version 18.0
CA Quick Copy Version 19.0
Related Problem:
PQC 801
Copyright (C) 2015 CA. All rights reserved. R01198-D180-SP1
DESC(ABEND S0C4 IN UTL#SYM WHEN USING TEMPLATE TO ALLOCATE COPIES).
++VER (Z038)
FMID (CPUTI00)
PRE ( RO74951 RO75456 )
SUP ( TR74732 TR85941 )
CA DB2 Tools 18.0 123
CA RS 1511 - PTF RO85943 DetailsCA DB2 Tools 18.0 123
CA RS 1511 - PTF RO85943 Details
Release Service Details18.0 RO85943 RO85943 M.C.S. ENTRIES = ++PTF (RO85943)
EXECUTION ALTER TABLE FAILS WITH SQLCODE -20385
PROBLEM DESCRIPTION:
In CA RC/Migrator for DB2 for z/OS (RCM), an SQLCODE -20385 will result
when executing the analysis of an alter table DDL if the analysis generates
DDL as follows:
1) Alter tablespace to alter SEGSIZE.
The execution of this alter tablespace will place the tablespace
in advisory reorg pending status.
2) Alter table which follows the Alter tablespace. The table is created
in the altered tablespace.
SYMPTOMS:
The execution of the Alter tablespace DDL will issue SQLCODE 610 as follows:
DSNT404I SQLCODE = 610, WARNING: A CREATE/ALTER ON OBJECT
<Database>.<Tsname> HAS PLACED OBJECT IN ADVISORY REORG PENDING
DSNT408I SQLCODE = -20385, ERROR: THE STATEMENT CANNOT BE PROCESSED
BECAUSE THERE ARE PENDING DEFINITION CHANGES FOR OBJECT
<Database>.<Tsname> OF TYPE TABLESPACE (REASON 2)
IMPACT:
Customer will not be able to make changes to the table when an alter on
tablespace causes an advisory reorg pending status.
CIRCUMVENTION:
Re-analyze the strategy setting the analysis option 'Drop & Re-create'
to 'Y'.
PRODUCT(S) AFFECTED:
CA RC/Migrator for DB2 for z/OS Version 17.0
CA RC/Migrator for DB2 for z/OS Version 18.0
CA RC/Migrator for DB2 for z/OS Version 19.0
Related Problem:
RCM 2740
Copyright (C) 2015 CA. All rights reserved. R01199-D180-SP1
DESC(EXECUTION ALTER TABLE FAILS WITH SQLCODE -20385).
++VER (Z038)
FMID (CINSI00)
PRE ( RO75383 RO75714 )
SUP ( TR85416 TR85906 TR85943 )
++HOLD (RO85943) SYSTEM FMID(CINSI00)
REASON (ACTION ) DATE (15300)
COMMENT (
+----------------------------------------------------------------------+
| CA Database Management Solution for DB2 for zOS Base Install |
| Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | Before using CA RC/Migrator for DB2 for z/OS (RCM) |
+----------+-----------------------------------------------------------+
|PURPOSE | To activate this PTF, the customer must perform a |
| | post-install process to load the new MODEL. Additionally, |
| | a change to the BATPROC CDBAPARM library member is |
| | suggested. |
+----------+-----------------------------------------------------------+
|USERS | This process is recommended for ALL USERS; however, it is |
|AFFECTED | specific to customers using CA RC/Migrator to alter |
| | TABLESPACE parameters - MAXROWS, SEGSIZE, DSSIZE, |
| | BUFFERPOOL and/or MEMBER CLUSTER - which result in the |
| | TABLESPACE being placed in Advisory REORG Pending status. |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | RCM Product Administration |
|REQUIRED | |
+----------+-----------------------------------------------------------+
|ACCESS | Access to the RCM product tables. |
|REQUIRED | Access to update the CDBAPARM library (BATPROC member). |
CA DB2 Tools 18.0 124
CA RS 1511 - PTF RO85943 Details
Release Service Details+----------+-----------------------------------------------------------+
| | |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
NOTE: This action is not required if CA RC/Migrator is NOT being used
to act on table spaces by modifying the following parameters - MAXROWS,
SEGSIZE, DSSIZE, BUFFERPOOL and/or MEMBER CLUSTER. However, if CA
RC/Migrator is being used to act on table spaces in such a manner, take
the action described below.
First, the customer must use the post-install process to load the new
model definition which has been delivered. Alternatively, below is a
copy of the MODEL definition which may be used to CUT and PASTE the
utility into your custom MODEL.
1. Start up the Install process.
2. Enter 3 Tasks.
3. Select your desired subsystem to customize.
4. Select the RCM post-install task of LOAD AND CUSTOMIZE THE MODEL
SERVICES TABLE
5. After entering necessary information, run the generated job to
install the delivered MODEL.
6. Exit the install process.
7. Once the job completes successfully, access the Main Menu for the
CA Database Management Solutions for DB2 for z/OS.
8. Select RC/Migrator (2).
9. Select Profile (0).
10. Select Utility Model Services (6).
11. Use the U line command to update the Model installed in 5 above.
12. Use the X line command next to the OREORGTS utility to activate it.
13. Use PF-3 or END command to save the changes.
Next, it is recommended that the BATPROC CDBAPARM library member be
updated as follows.
1. From the CA DB2 Tools product main menu, select EP to edit a
parmlib member.
2. Select the BATPROC member.
3. Use the I line command to insert a line for a new message number.
4. Enter DSNU1166 in the MESSAGE ID field and O in the FLAG field.
5. Use PF-3 or END to save the changes.
Note the following additional information:
With this PTF, we have delivered a "new" custom utility. This utility
is designed to allow Pending DDL changes made to a TABLESPACE to be
applied via an IBM REORG. This REORG must use SHRLEVEL CHANGE or the
REORG will not apply the pending change. Please go through the
post-install steps to load the new model with the new symbols (see
below). To take advantage of this updated process, this utility or one
like it must be used to allow timely application of TABLESPACE changes
which may restrict the ability to make subsequent TABLE and/or INDEX
changes.
To enable processing:
1. This utility must be in an ACTIVE state.
2. The %OREORG symbol, must be set to a value of 1 so that the
analysis processing can determine whether the IBM REORG was
generated. It may have an X in the ERR column if this symbol is not
in use by the utility text.
When running the generated REORG (under Batch Processor), it is
expected that the utility will issue message DSNU1166I, an
informational message, which results in a RC=4. To override this RC=4
when this message is issued, add message DSNU1166 to the BATPROC
CDBAPARM library as follows:
(DSNU1166,O)
Without the addition of this message to BATPROC, the REORG (if message
DSNU1166I is issued) will stop the script prior to the .SYNC that
follows it.
CA DB2 Tools 18.0 125
CA RS 1511 - PTF RO85943 Details
Release Service DetailsOne final note, this utility relies on a new auto-symbol, %PENDDDL,
which was added specifically for this process. It MUST NOT appear in
the utilities symbol list, or that symbol's value will override the
set auto-symbol. If the utility should have generated, but didn't,
verify that this new auto-symbol is not in the utilities user-symbol
list. To verify, use the BROWSE line command on the model, then the
SYMBOLS line command on the utility, If the symbol is listed, then it
is included in the utility's user symbol list and must be removed.
Here is the new custom utility, OREORGTS:
UTILITY OBJ DESCRIPTION SIZE
OREORGTS TS PENDING DDL ONLINE REORG
CMD SYMBOL ERR REPLACEMENT VALUE
_ COPYDSN %ODSN.&PA..COPY______________________________________
_ DATACLAS _____________________________________________________
_ DISCDSN %ODSN..DISC__________________________________________
_ DSN %USERID..%DSNQUAL2..%DSNQUAL3________________________
_ MGMTCLAS _____________________________________________________
_ ODSN %DSN..TS_____________________________________________
_ OREORG 1____________________________________________________
_ PRIQTY -1___________________________________________________
_ SECQTY -1___________________________________________________
_ STORCLAS _____________________________________________________
_ UNLDDSN %ODSN..UNLD__________________________________________
#CM *******************************************************************
#CM * *
#CM * THIS MODEL IS USED TO GENERATE AN ON-LINE IBM REORG TO APPLY *
#CM * PENDING DDL CHANGES MADE AT THE TABLESPACE-LEVEL. IT IS MEANT *
#CM * TO BE EXECUTED AT THE SQLPOSO POSITION IMMEDIATELY AFTER ALL *
#CM * TABLESPACE DDL HAS BEEN PRODUCED. WITHOUT THIS REORG, POTENTIAL *
#CM * TABLE OR INDEX DDL MAY FAIL DURING EXECUTION. *
#CM * *
#CM * NEW SYMBOL ADDED: *
#CM * %PENDDDL 0 | 1 - THIS IS AN AUTO SYMBOL ONLY SET AT THE SQLPOSO *
#CM * POSITION WHEN DETECTED TS CHANGES HAVE BEEN *
#CM * MADE CAUSING PENDING DDL. *
#CM * %OREORG 1 - IF THIS USER SYMBOL IS PRESENT, IT INDICATES *
#CM * THAT THIS IS AN ON-LINE REORG UTILITY USED TO *
#CM * APPLY PENDING DDL. IF THIS VALUE IS MISSING OR *
#CM * SET TO A VALUE OTHER THAN 1, SUPPRESSION TO *
#CM * CURRENTLY QUEUED REORGS WILL NOT BE DONE. *
#CM * *
#CM *******************************************************************
#IF(%SQLPOSO)
#IF(%OBJDISP,EQ,ALTER)
#IF(%PENDDDL)
.CALL UTIL REORG PARM(%TOSSID)
.DATA
TEMPLATE PTIUNLD DSN '%UNLDDSN'
DATACLAS(%DATACLAS)
MGMTCLAS(%MGMTCLAS)
STORCLAS(%STORCLAS)
SPACE CYL
TEMPLATE PTICOPY DSN '%COPYDSN'
DATACLAS(%DATACLAS)
MGMTCLAS(%MGMTCLAS)
STORCLAS(%STORCLAS)
SPACE CYL
TEMPLATE PTIDISC DSN '%DISCDSN'
DATACLAS(%DATACLAS)
MGMTCLAS(%MGMTCLAS)
STORCLAS(%STORCLAS)
SPACE CYL
EXEC SQL
CREATE TABLESPACE %STRATEGY
IN %DBNAME
CA DB2 Tools 18.0 126
CA RS 1511 - PTF RO85943 Details
Release Service DetailsUSING STOGROUP SYSDEFLT
PRIQTY %PRIQTY
SECQTY %SECQTY
ERASE NO
SEGSIZE 4
BUFFERPOOL BP0
LOCKSIZE ANY
LOCKMAX SYSTEM
LOCKPART NO
CLOSE NO
CCSID EBCDIC;
ENDEXEC
EXEC SQL
CREATE TABLE MT%DBNAME%OBJECT._TB
(TYPE CHAR( 01 ) NOT NULL,
SOURCE_RID CHAR( 05 ) NOT NULL,
TARGET_XRID CHAR( 09 ) NOT NULL,
LRSN CHAR( 06 ) NOT NULL)
IN %DBNAME..%STRATEGY
CCSID EBCDIC
ENDEXEC
EXEC SQL
CREATE UNIQUE INDEX MI%DBNAME%OBJECT_IDX
ON MT%DBNAME%OBJECT._TB
(SOURCE_RID ASC,
TYPE,
TARGET_XRID,
LRSN)
USING STOGROUP PTSG
PRIQTY %PRIQTY
SECQTY %SECQTY
ERASE NO
BUFFERPOOL BP0
CLOSE NO
ENDEXEC
REORG %OBJTYPE %CREATOR..%OBJECT
LOG NO
COPYDDN PTICOPY
UNLDDN PTIUNLD
DISCARDDN PTIDISC
SHRLEVEL CHANGE
DRAIN_WAIT 20
RETRY 10
RETRY_DELAY 60
MAPPINGTABLE MT%DBNAME%OBJECT._TB
MAXRO 18
DRAIN WRITERS
LONGLOG CONTINUE
DELAY 1200
FASTSWITCH YES
UNLOAD CONTINUE
KEEPDICTIONARY
STATISTICS
TABLE(ALL)
INDEX(ALL)
REPORT NO
UPDATE ALL
HISTORY NONE
FORCEROLLUP NO
EXEC SQL
DROP TABLESPACE %DBNAME..%STRATEGY
ENDEXEC
.ENDDATA
#ENDIF
#ENDIF
#ENDIF
).
CA DB2 Tools 18.0 127
CA RS 1511 - PTF RO85958 DetailsCA DB2 Tools 18.0 127
CA RS 1511 - PTF RO85958 Details
Release Service Details18.0 RO85958 RO85958 M.C.S. ENTRIES = ++PTF (RO85958)
LBIND/LREBIND ON PLAN OR PACKAGE FAILS WITH S0C4
PROBLEM DESCRIPTION:
In CA RC/Query for DB2 for z/OS (RCQ), LBIND/LREBIND commands on a plan or
package may fail with abend S0C4.
SYMPTOMS:
Issuing LBIND/LREBIND commands on a plan or package fails with S0C4 abend in
module PTALBND.
Example:
IRX0250E System abend code 0C4, reason code 00000017
IRX0255E Abend in host command ISPEXEC or address environment routine TSO.
IMPACT:
You cannot use LBIND/LREBIND commands on plan/packages.
CIRCUMVENTION:
NONE.
Related Problem:
RCQ 1499
Copyright (C) 2015 CA. All rights reserved. R01203-D180-SP1
DESC(LBIND/LREBIND ON PLAN OR PACKAGE FAILS WITH S0C4).
++VER (Z038)
FMID (CINSI00)
PRE ( RO75312 )
SUP ( RO77458 RO85481 RO85569 TR77458 TR85038 TR85473
TR85481 TR85569 TR85958 )
++HOLD (RO85958) SYSTEM FMID(CINSI00)
REASON (DB2BIND) DATE (15302)
COMMENT (
+----------------------------------------------------------------------+
| CA Database Management Solution for DB2 for zOS Base Install |
| Version 18.0 |
+----------+-----------------------------------------------------------+
|SEQUENCE | After Apply |
+----------+-----------------------------------------------------------+
|PURPOSE | Bind Plans and Packages |
+----------+-----------------------------------------------------------+
|USERS | |
|AFFECTED | All Users |
+----------+-----------------------------------------------------------+
|KNOWLEDGE | |
|REQUIRED | CA DB2 Tools Post Install Customization. |
+----------+-----------------------------------------------------------+
|ACCESS | 1. CA DB2 Tools Post Install |
|REQUIRED | 2. BIND, SYSADM or SYSCNTL on DB2 subsystem. |
+----------+-----------------------------------------------------------+
**************************
* STEPS TO PERFORM *
**************************
DBRMs have changed as part of this maintenance. Refer to the
Implementation Guide for details on how to perform the following step.
1. Use Post-Install Tailoring option to Bind Product Packages and Plans.
).
CA DB2 Tools 18.0 128
CA RS 1511 - PTF RO85972 DetailsCA DB2 Tools 18.0 128
CA RS 1511 - PTF RO85972 Details
Release Service Details18.0 RO85972 RO85972 M.C.S. ENTRIES = ++PTF (RO85972)
BROKEN PAGE AFTER PRR ON PARTITION V11 BIGTAIL
PROBLEM DESCRIPTION:
When CA Rapid Reorg for DB2 for z/OS (PRR) reorgs a partitioned object
with extended RBA values in DB2 11, it updates an incorrect value in the
FOSMNENT space map page field. FOSMNENT indicates the maximum number of
pages allowed per space map. If you subsequently try to copy the object
with an IBM COPY job, or with a CA Quick Copy for DB2 for z/OS (PQC) job
that specified SHRLEVEL REFERENCE and AUDIT 1 or 2, the job will fail with
a broken page found message.
SYMPTOMS:
IBM COPY jobs fail with the following message:
DSNU441I -DTTA 223 11:28:14.89 DSNUBASA - BROKEN PAGE FOUND
DBNAME = DBname
TSNAME = TSname
DSNUM = DSnum
PAGE = page number
ERRORCODE = X'0CA8'
PQC jobs that specify SHRLEVEL REFERENCE with AUDIT 1 or 2 fail with the
following messages:
PUT0150E - Error(s) found for Tablespace DBNAME.TSNAME Partition 1
PUT0151E - Error(s) found for page 00000001
PUT0170E - The number of SPACEMAP entries is invalid
PUT0152E - Invalid data: 00002A28
PQC0072E ERROR ENCOUNTERED FROM AUDIT INIT CALL, RC = 0000
PQC0192E INTERNAL RC 16 AT LOCATION 0160
IMPACT:
Users cannot copy the object with IBM COPY or with a PQC job that
specifies SHRLEVEL REFERENCE with AUDIT 1 or 2.
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED:
CA Rapid Reorg for DB2 for Z/OS Version 17.0
CA Rapid Reorg for DB2 for Z/OS Version 18.0
CA Rapid Reorg for DB2 for Z/OS Version 19.0
Related Problem:
PRR 1267
Copyright (C) 2015 CA. All rights reserved. R01205-D180-SP1
DESC(BROKEN PAGE AFTER PRR ON PARTITION V11 BIGTAIL).
++VER (Z038)
FMID (CPRRI00)
PRE ( RO73458 RO78826 RO80267 RO82276 )
SUP ( TR85972 )
Recommended