By XXXXXXX Coop 120

By XXXXXXXCoop 120

HVAC-R Trade(Heating, Ventilating, Air Conditioning, Refrigeration)

Location: 385 Wilsey Road, NB

What is the Job Description?Most Heating, Ventilation, Air Conditioning and Refrigeration Technicians commonly referred to as HVAC+R techs work with electrical, mechanical, sheet metal, control wiring and chemicals blended to make refrigerants. They study temperatures and pressures to determine proper system operation. Mechanical devices are analyzed to identify problems. In this trade, the technician is provided with a service van which he uses as a means of transportation to get to the sites where the problems are. Techs must be trustworthy as they have a great deal of freedom. Techs must be honest, hard working and reliable.

Troubleshooting Change filters Check belts Change compressors Clean condenser coils Greased moving parts Put refrigerant in units Insulate Pipes Installed Pot Feeders Installed Refrigerant Detection ETC.

Tasks and Duties Brazing Welding Checking Temperatures Run Wire Recover Refrigerant out of units Bending pipe Flaring pipe Solder Joints Making electrical connections Pick up supplies Hook up actuators and thermostats

633 Queen Street

J7 Base Gagetown

Refrigerant Detection System

Mechanical Room

Rooftop Unit at Kent Building Supplies

THANK YOU!

Sources of Information http://www.carmichael-eng.ca/E_index.html http://www.scc.spokane.edu/?hvac http://www.directoryofschools.com/Salary-Guides/HVACR

.htm

http://www.google.ca/imgres?imgurl=http://cfnewsads.thomasnet.com/images/large/518/518055.jpg&imgrefurl=http://news.thomasnet.com/npProductsInNews.html%3Fpncat%3D5555

http://www.plumbersurplus.com/Prod/Klein-Tools-631-7-Piece-Cushion-Grip-Nut-Driver-Set-3-Shanks/98455/Cat/507

http://www.drillspot.com/products/74664/Klein_Tools_11055_Wire_Striper