Building Success After Hours - Bentley...• AECOsim Building Designer SELECTseries 5 Release...

© 2014 Bentley Systems, Incorporated

4th March 2014

Building Success After Hours

2 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Agenda - Datasets

6:00 Technical session – Updates • AECOsim Building Designer Grid Systems Phase one • Dataset Migration from SS3/4 to SS5 • SS5 Update

6:15 Featured Speakers – • Stephen Holmes • Robert Jones How Foster + Partners are implementing AECOsim Building Designer and customising datasets

7:15 Wrap up followed by “Drinks and Nibbles”

7:30 End

3 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated 3 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

News

4 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Product Releases

• AECOsim Building Designer SELECTseries 5 Release Candidate v 08.11.09.735

• Dataset_GB SELECTseries 5 Release Candidate v 08.11.09.714

• Bentley Navigator V8i (SELECTseries 5) v 08.11.09.536

• Early Access Program release of 64 bit MicroStation (the next major version) - Anticipated during Q2

5 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Bentley LEARNing Conference UK

03 June 2014 - 04 June 2014

International Convention Centre and Hyatt, Birmingham

Tracks will include: • Open Roads Technology, GEOPAK, and InRoads • MicroStation • ProjectWise • AECOsim Building Designer and Hevacomp • Bentley Developer Network

6 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

BIM Show Live

23 April 2014 - 24 April 2014

Manchester Central

This year Bentley will be exhibiting, so come up and see us!

• www.bimshowlive.co.uk

7 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Software Fulfilment Centre

From the SELECTservices downloads page try Web Downloads

8 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

http://apps.bentley.com/fulfillmentcenter/

9 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated 9 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Grid Systems – Phase One

Technical Updates

10 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Grid Systems – Phase One

• Create grid using the Column Grid tool

• search help for: ‘Create a Grid System’

11 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Grid Systems – Phase One

• Create grid models and reference into your project’s master models

12 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Grid Systems – Phase One

• Tick Show Grid System to display the grid in your DVs.

• Grids are included by Display Sheet Annotations in Models

13 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Grid Systems – Phase One

To see the grid, the Elevation callout must be parallel to the grid

14 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Grid Systems – Phase One

Floor Levels can be displayed in elevation by setting the floor’s Annotation property to True

15 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Grid Systems – Phase One

Floor Levels only

16 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Grid and Floor Levels

Grid Systems – Phase One

17 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Grid Systems – Phase One

• Grid Systems Phase Two is targeted for SS6 in late 2014

18 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated 18 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Dataset Migration From SS3/4 to SS5

Technical Updates

19 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Dataset Migration From SS3/4 to SS5

• The SS4 dataset includes a guide to migration from SS3: – C:\ProgramData\Bentley\AECOsimBuildingDesigner V8i

Ss4\WorkSpace\BuildingDatasets\Dataset_GB\Dataset_GB Notes.pdf

• Updating/Migrating and SS3 Datasets to SS4

20 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Dataset Migration From SS3/4 to SS5

1. Create a new network location for your workspace and dataset in parallel to the existing ss3 dataset

2. Copy existing workspace folders and contents to the new SS4 folder

3. Copy the delivered SS4 Building Dataset to the SS4 folder

4. Copy your Company Dataset (if you have one) folders from SS3 to SS4

5. Identify any other dataset files that you created in SS3, then copy to the SS4 dataset

6. Update any modified Dynamic View DrawingSeeds

7. Modify existing Project Configuration Files for projects that are being migrated to SS4

8. Upgrade or recreate the BB_Floormaster files for any projects that are being migrated to SS4

9. Modify your PCF template then copy it to an appropriate location

10. Run DG and Dataset update utilities as described in ABD help

11. Update project datasets as above where relevant

21 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Dataset Migration From SS4 to SS5

These changes are included in the SS5 Datasets

1. Systems Configuration Changes:

…\config\appl\BuildingDisciplines.cfg

Added New Configuration Variable

BMECH_OVERRIDESETTING_FILE : (TFDIR_SETTING)MechanicalOverrides.xml

Removed (not compatible with Structural & Mechanical workflows) #‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ # Include configuration for accelerating Plotting by not enabling DataGroup Validation when Plotting #‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ %if !defined (_PWEXPLORER) MS_PLT_ENGINE_CMDLINE_ARGS =‐wsBB_DISCIPLINE=MicroStation %endif

22 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Dataset Migration From SS4 to SS5

2. New systems schema …\AECOsimBuildingDesigner\datagroupsystem\CustomParamLinearSlotDiffuser.xsd

3. Modification in existing systems schema …\AECOsimBuildingDesigner\datagroupsystem\Mechanicalcatalogtypes.xml

4. New Dataset File …\Dataset_XX\setting\MechanicalOverrides.xml

5. Modification of Dataset Files ..\Dataset_XX\cell\symbols\DuctSymbols.cel ..\Dataset_XX\datagroupcatalogs\HVAC_Diffusers.xml ..\Dataset_XX\datagroupsystem\Dataset_catalogtypeexts_Mechanical.xml ..\Dataset_XX\datagroupsystem\DisplayNames_Mechanical.xml ..\Dataset_XX\datagroupsystem\Enumlookups_Mechanical.xml

23 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated 23 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

AECOsim Building Designer SS5 Release Candidate

24 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

ABD SS5 -

Building Platform: • Windows 8.1 Compatibility • Microsoft Office 2013 Compatibility • RFA Interpreter • Reporting Enhancements • Replicate Drawing Option • IFC Export Enhancements • Create Plan View(s) Tool Enhancement • Label Coordinate Annotation Tool • Sneak Preview of Future

Mechanical: • Duct Sizer (New and Improved) • New Mechanical Content • Drawing Enhancements

Structural: • Steel Deck Enhancements • Bar Joist Enhancements

25 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

ABD SS5 – RFA Interpreter

26 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Multi-Category Schedules

27 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

IFC Import/Export

• 64-bit IFC translation module – Faster and able to handle larger models

• But…

• Make sure you have enough RAM!

28 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Two New ACS Related Features

• Create Plan tool – Align View options – Global Coordinates – Active ACS – Floor ACS

• Label Coordinate – By ACS

29 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Create Plan by Floor ACS

30 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Enhanced Label Coordinates Tool

• Place coordinates relative to the active ACS

• Includes a Leader Line

• Symbology controlled by Annotate Tool Settings

31 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

Two new Variables to Set

• BB_DG_ECSCHEMA_CACHE

• BB_DG_ANNOTATION_HONORS_ACS

32 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

BB_DG_ECSCHEMA_CACHE

Speeds up platform tools that access EC data – e.g. Element Information

In your PCF Set: BB_DG_ECSCHEMA_CACHE = $(_USTN_PROJECTDATA)support/dataset/data/

33 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

BB_DG_ECSCHEMA_CACHE

Store the cache file in the project dataset's data folder - to cache project specific data.

A local copy of the cache is created in the background. - there is no need to direct this variable to a local folder.

Changes to the dataset are picked up automatically - addition of custom parts for instance,.

34 | WWW.BENTLEY.COM | © 2014 Bentley Systems, Incorporated

BB_DG_ANNOTATION_HONORS_ACS

• Set this = 1 in the PCF

• Refresh Auto Annotation

• The annotation rotates to the active floor ACS

• Save Settings to preserve the rotation

• It will not control: – unmanaged annotations – a managed annotation that has

been manually rotated.