Brochure English DELTRAK 2 2010 Edit JSB Final (B&S Vanguard) Toyota – Daihatsu 3-cylinder...

EXTREMESLOPE

The history of IRUS

1865

JG

TrI

HM Iit

Micky

TwlT

IT

Id3

KM 300

2

SHtf

2

KOMTRAK 2

LC

2

Ic

DELTRAK

. Rilling founded a manufacturing operation of mills in Dusslingen. The

1

1

1

1

1

928

he world's first bar mower type HM is being developed by IRUS andeceives a patent in the same year.

953

RUS leads the single-axle U 600 in the agricultural industry;n subsequent years, the types U 300, U 900 and U 1200 with ZF

968

he most successful of IRUS mower is the famous "MICKEY"ith the IRUS succeeds in developing a hitherto unknown small and

ightweight mower.

985

RUS passes into new ownership.

986

RUS is presenting a world first - a sickle bar mower with aifferential lock, steering brakes and low-pressure tires Terra - the

003

tart of production of a new generation of hydrostatic equipment rack. TheYTRAK marks a new era. On the demo of the park in Fulda KOMTRAK 25,

he first radio-controlled machine IRUS is presented, and awarded a medal

004

Ww

ith the IRUS KOMTRAK presents the strongest single axle in the

005

aunch of DELTRAK, the first radio-controlled flail mower with

008

RUS Celebrates 80 years of motorized equipment

IRUS DELTRAK 2.0

DELTRAK 2.0 with theflail mower mowing ofscrub and foliage on asteep slope.

The radio-controlled carrier DELTRAK 2.0 is the clear leader when it comes to mowinginaccessible steep terrain, soft terrain and areas that present operational hazards tobystanders or highway traffic.The Deltrak 2.00 is a Commercial product that is designed with safety and precision.Pure German technology from a Company that has a deep, 83 year engineeringbackground.The traction unit has a multitude of attachments that ensures maximum utilization afterthe purchase.

DELTRAK 2.0 with theflail mower on anembankment ,mowing.

IRUS DELTRAK 2.0

Deltrak 2.00 can be Heli lifted into inaccessible country for fuel reduction necessaryfor safe back-burning and for reduction of fuel in bushfire prone areas.Walking tracks in National Parks can be easily maintained with a choice of quick fit ,front mounted attachments.

The Deltak 2.00 allows many benefits over other obsolete andunsafe methods of sloping terrain maintenance .

Significant cost savings :1. Deltrak 2.00

Reduces maintenance costs by up80% when compared to hand heproducts such as brush-cutters anwalk behind machines.At .71 hp per inch of cut, the machinhas huge power reserves to covlarge areas of terrain that would staall other modes of cutting. Stickbranches, shrubs and long grass aall mulched safely by Deltrak 2.00.Ground coverage can exceed 10,00square meters per hour on even anunobstructed grounds

Benefits!

toldd

eerll

s,re

0d

MTzopm

MONhnijh

aximum Security:he operator is located outside the dangerone. Flail mower is safe when thrownbjects are considered. All objects arerocessed into the ground behind the

aintaining the health of theperator:

o mountaineering, no slipping, noanging on branches, thorns and scrub,o vibration on hands , no exhaust fumes

n the immediate vicinity, no stress ofoints. In tropical areas, venomousazards are not an issue.

IRUS DELTRAK 2.0

When working with the 2stage snow blower,e.g. avalanche areas can

be cleared and slipperysurfaces processed withoutrisk.

StumpgrinderRemoving, roots, snags andrhizomes . Operator can bea safe distance away oninaccessible or steepslopes.

Front mounted Flail Moweris wider than the trackseliminating compressedgrass, hydraulic remotefront lift allows 40cm ofclearance for removal ofdebris and easy blade maint

IRUS DELTRAK 2.0

Technical data:

Motor: (B&S Vanguard) Toyota – Daihatsu 3-cylinder turbo-diesel engine 25.4 KW( 35.0 HP), liquid cooled, electric start, hour meter, oil, and temp controllers

Drive: hydraulic crawler tracks with direct drive, proportional speed control of crawlerdrive on the radio control, forward and backward, trim control allows easystraight tracking on steep slopes

Speeds: 0 - 10 km/h Reverse: 0 - 10 km/hMaximum speed, via infinitely variable cruise control on the multi function remote.

Track Width: 1100 - 1250 mm (infinitely adjustable)

Centre of Gravity Diesel engine is 63cm ( 24.8” ) high, width of tracks 1250 max. ( refer JSB )

Max. Slope: 55° | 120% ( refer to JSB Equip Risk Docs)

Radio range: approx. 200-300 m (line of sight)

Standard drive: - Drive / steer (continuously, proportional)Features: - Motor start / Motor stop

- Infinitely variable control of engine speed- Deltronic electronic monitoring system, continuous monitoring ofall fluids, fuel, hydraulic oil, engine oil and engine coolant.

- Remote PTO engagement- Front attachment lift and lowering

Optional: - Control of auxiliary hydraulic cylinders

Features: - Control additional electric cylinders

Total weight: - approx. 690 kg (base machine incl. crawler chassis) add attachments..

Multi award winner atnumerous Europeannational and internationaltrade fairs:

Ground Pressure - 2 PSI ( dependant on track setup )

IRUS DELTRAK 2.0

Optional equipment:- Tapered 50mm track spikes- Transport rubbers for spikes- Front and Rear Work lights- Rotating Beacon- Additional hydraulic connections- Additional electrical connections- Valve to control the lowering speed- Lifting sling frame and perimeter bar.- Recovery Kit, Winch, plasma rope.- Helicopter sling kit.(Certified)

IRUS DELTRAK 4.0IRUS DELTRAK 2.0

Radio control:The most important part of DELTRAK 2.0 is theradio control system. Equipped with two largejoysticks for easy driving and steering, as well asvarious additional switches to control othermachine functions. 18 controls in total .

Full hydraulic drive (no belts,chains,clutches) :The full hydraulic drive of DELTRAK 2.0 consists of3 high quality axial piston pumps. 1 gear pump.The DELTRAK has 2 very large oil cooler s toincrease the efficiency and protection of thehydraulic components. Twin cooling fans fitted.

Zero gravity engine articulation :To protect the engine, the engine has 155mm ofoil under the level mark ( deep sump)The auto engine tilt system ensures that theengine oil supply is protected at all times.Watchdog system is fitted, early warning device.

HAmcc

Hydraulic connections:The interface between DELTRAK 2.0 andattachment are hydraulic . Screw couplings areused here to avoid against unintentionaldisconnection. High flow hydraulic hoses &

ydraulic front attachment mount :ll attachments fitted to Deltrak 2.00 areounted on a quick hitch system, self

entering, this ensure easy attachmenthanges . Counter balance system is fitted.

IRUS DELTRAK 2.0

Maintenance / cleaning:The panels of DELTRAK 2.0 can simply beopened for the cleaning and maintenance of allcomponents. Swing up oil coolers allow accessto both suction and pusher electric fans. The twincoolers are robust solid aluminium for durability.

Diesel engine:The drive of DELTRAK 2.0 is a very light androbust 3-cylinder turbo-diesel engine with watercooling . The B& S (Toyota -Daihatsu) industrialmotor is designed for use under harshconditions. Fuel filter monitor is included.

Twin tracks:The robust crawler chassis has direct hydraulicdrives with high sprocket design, free runningand optimally arranged rollers on the side guidesof track. The IRUS tracks can be used smooth,with replaceable metal cleats and optionalspikes. # 3 modes for all terrain applications #

Attachments

Flail Mulcher 2 models :-Working width: 1050 mm or 1250 mm - Cutting

height adjustment of trailing roller and/or lateralskids .

- Axial piston motor and triple v-belt drive AX 33- BladesThree different Schlegel available:

- Y-blade: 36 blades / 42 blades- Delta blade: 18 blades / 21 blades- Hammer flail: 18hammers / 21 PCs - Weight:..110 kg / 120 kg- For extensive landscaping, level cutting- To cut grass, scrub and foliage up to 50 mm- Heavy duty high speed rotor shaft on both models.

Rotary Disc Mower,timed blades:- Working width: 1300 mm or 1660 mm -number of discs: 3 or 4- Number of blades: 2 blades per disc- Central passage of cut material- Wide drop- Lighter and more stable aluminum frame ofbridge- Direct hydraulic drive hydraulic motor - easyaccess for cleaning, maintenance, and bladechange via hinged panels- Detachable cage protection whentransporting- Weight: 140 kg / 160 kg- to cut grass, preferably if mulch is notrequired/prohibited and/or if the grass shouldbe required for the production of feed.

IRUS DELTRAK 4.0Attachments:

Front Mower :Double reciprocating blade Bidux-system

- Working width: 1150 mm / 1500 mm / 1900mm - cutting from front, tiltable .- Mower can cut on steep slopes and streamcourses to +/-weight 80° tilted up and down- Standard impact protection

- Depending on the bar width: 130-160 kg

Anbaugeräte

Front Debris/ Belt rake :-Working width: 1450 mm- 2 leading wheels to the height adjustment- Reversable in the right direction - work speed is..adjustable- Ground following- weight: 135 kg

Stone burrier, tiller :-Working width: 1000 mm- Trencher teeth: 14 piece (as standard) max up to28- Large passage to prevent blockage and deadlockby stones- Working depth adjustment via crank- Mesh roller- hydraulic drive hydraulic motor and duplex rollerchains weight:

137 kg

– For use in creating seed beds in stony areas, hidesstone and pebble

Anbaugeräte

t

Snow and Soil Blade :- Working width: 1250 mm / 1500 mm- Lift height: up to 400 mm- Rubber cutting edge for concrete / ashphalareas (removable)- Hydraulic slew, left and right ( extra remotekit required )– Weight: 70 kg / 80 kg

Zuagg Snow Blower:-Manufacturer: Zaugg AG Eggiwil (CH)- working width: 1000 mm- Height: 700 mm- Hydraulically rotating discharge- Electric throwing adjustment- Suitable for soft, hard, and wet - extremelyrobust construction - weight: 238 kg

Attachments with Adaptor Coupling

Adaptor Coupling:-For the propulsion of IRUS implements with Ø 65

mm nozzle and 3 claws profile- Hydraulic drive gear motor and spur gears- Connection of the attachments of IRUS system- Support pressure reduction and tilt adjustment

Sweeper :-Working width: 1300 mm- Central drive between the brushes- Height adjustment via swivel wheels- Hydraulic slew, left and right- Roller diameter 400 mm- Available with differing brushes:- Dirt placing brushes, 16 rows- Universal Sweeper brush 12-row- Snow Sweeper brush, 8-rows

- Weight with brushes: 52 kg

- Optional equipment:- Hopper- Mudguard- Crank adjustment of swivel wheels

IRUS DELTRAK 8.0Attachments with Adaptor Coupling

Weed Brush :- Working width: 1000 mm- Tilt the brush rotor- Round wire bundles and plastic bundle available

- Weight: approx. 100 kgFor weed removal on hard or soft surfaces,

Power Harrow:- Working width: 1100 mm / 1300 mm- Complete drive cone plate wheel and cylindricalgear in an oil bath- Circular Tine- Working depth adjustment of mesh roller andcrank - adjustable blade

- weight: 118 kg / 137 kg

Rotary weederWorking width: 1400 mm

- Low-vibration operation , two opposing rotors

- Drive on cone plate of control and export centercrank

- Working depth adjustment via cookie roller .

- Weight: 103 kg

A

QUATRAK Universal-Einachser

2007Balkenmäher

2007Kommunal

2007

Quatrak

• Extremely safe• Remote control

Single AxleHD Hoe Field Mower

Mowing in a new DIMENSION:• Extremely steep• extreme soil compaction

Australian Importer and Distributorfor Deltrak 2.00

JSB Equipment Pty. Ltd.28 TOVA DRIVE CARRUM DOWNS VIC 3201.P: (03) 97708424 F: (03) 97708494