View
227
Download
0
Category
Preview:
Citation preview
BINNS & BERRYCRAWFORD SWIFT
Part of the CQMEGroup of Companies ABSOLUTE PRECISION MAKES ALL THE DIFFERENCE
BINNS & BERRYCRAWFORD SWIFT
www.ptgheavyindustries.com
PTG HEAVY INDUSTRIESVERSA TURN HOLLOW SPINDLE LATHE
PTG Deutschland GmbH (Europe)
Pilsener Straße 9, D-86199 AugsburgGermany
Tel: +49 821 908983 0Fax: +49 821 908983 20 Email: info@ptgltd.com
PTG Asia (Shanghai)
ShanghaiChina
Tel: +86 136 5181 9693Email: info@ptgheavyindustries.com
PTG Asia (Beijing)
BeijingChina
Tel: +86 136 0 1351260Email: info@ptgheavyindustries.com
Bulat Galeev (Russian Representative)
MoscowRussia
Tel: +7 903 109 09 23Fax: +7 903 109 09 23
Email: info@ptgheavyindustries.com
Francis Klein
IndiaKolkata 700 071
Tel: +91 33 221 719 26 / 27 / 28 / 221 715 41Fax: +91 33 221 715 40
E-mail: fkleinkol@francisklein.in
Wyatt Machine Tools International
USATel: +1 (804) 337-9433Fax: +1 (804) 769-3682
Email: phil.wyatt@ptgheavyindustries.com
CKB Corporation (Japan)
TokyoJapan
Tel: +81 3 3498 2131 Email: info@ptgheavyindustries.com
PTG Heavy Industries Ltd
Bays 5 & 6, Rosemount Works,
Huddersfi eld Road, Elland,
West Yorkshire, UK
HX5 0EE
Tel: +44 (0)1422 379 222
Fax: +44 (0)1422 379 122
Email: info@ptgheavyindustries.comHeavy Industries Limited.Registered in England and Wales. Registration No. 06594872
PTG Heavy Industries operate aquality management system which complies with the requirements of
BS EN ISO 9001;2008
001_12_PTG_HI_A4_4P_VERSA_LATHE_FINAL.indd 1-2 30/08/2012 20:15
BINNS & BERRYCRAWFORD SWIFT
BINNS & BERRYCRAWFORD SWIFT
THE VERSA TURN SERIESThe VERSA TURN series offers a modern concept in lathe design, which retains the traditional fl at bed confi guration, time proven as the optimum between ‘stability’, ‘capacity’ and ‘cost’.
The machine offered is a standard item of equipment manufactured in the United Kingdom and featured in our range of lathes that are in current and regular manufacture. Equipped for sliding, surfacing, contouring, and screw cutting operations by CNC control, the machine additionally meets the requirements for manual operations for turning and facing using power assisted Micro-Handwheel controls.
The clutchless Headstock, positioned between two 3/4 guideway beds, has a Siemens Digital AC Spindle Drive, rated at 80 kW (107 HP) with a 450 mm Spindle bore.
■ Y axis with +/- 100mm of travel for both 1st and 2nd carriage
■ Second carriage with Turret and extra wide, full across Saddle with extended single piece Cross slide
■ Heavy Duty, Interchangeable, Boring Bar Holder, 150-200mm (6-8”)for second carriage
■ Heavy duty chip conveyor to the full length rear of the machine
■ Powered Clamping of the Tailstock to the Machine Bed
■ Motorised Towing pin for Tailstock Positioning via CNC Control
■ Air-condition unit for electrical cabinet & CNC pendant
■ CNC “C” Axis with hydraulic disk brake giving 360,000 Continuous Path,+/- .01 Degree Accuracy supplied with a separate “C” axis drive
STANDARD EQUIPMENT& INSTALLATION SERVICE■ Installation supervision and machine start-up
■ Machine programming and operator training
■ Siemens 840 D switchable to MDI and manual control
■ Siemens 6FT series digital AC variable frequency servo drives
■ Siemens series digital AC variable frequency spindle drive motor
■ Siemens MMU pendant handwheel
■ Heidenhain Linear scale to X and Z axes
■ Spindle speeds, infi nitely variable, surface speed programming
■ Three range headstock with automatic range selection
■ Hardened and ground tool steel ways on X and Z axes
■ Ball screw drive for X1 and twin pinion drive for Z1 axis
■ Ball screw drive for X2 and Z2 axis
■ CE Safety Standard
■ Electric’s to suit your supply specifi cations
■ Stand alone IP 55 electrical enclosure
■ Jog button for spindle
■ Voltage spikes protection
■ Low lubrication indicator light on pendant
■ Sliding chip guard and sliding chuck guard
■ Full rear guarding
■ Surrounding coolant tray
■ Electric coolant pump and fi ttings
■ Set of foundation bolts for machine ordered
■ Warranty on parts and labour
■ 2 weeks training for 3 engineers
SPECIFICATIONSModel, Universal Versa Turn - 1000 x 9000
Swing over bed 1000 mm
Turning diameter 800 mm
Cross travel (X axis) 550 mm
Distance between centre Z1 9100 mm
Distance between centre Z2 3000 mm
Rapid traverse rate - Z axis 6000 mm/min
Rapid traverse rate - X axis 6000 mm/min
Spindle power 80 kW (107 Hp)
Spindle nose (front) DIN 55026
Spindle through bore 450 mm
Spindle speeds, infi nite 1.5 - 550 RPM
CNC control (Seven axis) Siemens 840 D
Turret Disc turret 8 position (4 live)
Chucks (2 off) 1000 mm Ø, 4 off 2 pc ,jaw
Dimensions (approx.) Width 2640 mm, Length 16,400 mm, Weight 44,000 Kg
PTG HEAVY INDUSTRIES VERSA TURN HOLLOW SPINDLE LATHE PTG HEAVY INDUSTRIES VERSA TURN HOLLOW SPINDLE LATHE
001_12_PTG_HI_A4_4P_VERSA_LATHE_FINAL.indd 3-4 30/08/2012 20:15
Recommended