View
234
Download
3
Category
Tags:
Preview:
DESCRIPTION
MacDermid Autotype Industrial Film Systems brochure
Citation preview
Autotype Film Systems
Film Systems for MembraneSwitches, Keyboards, Fascia Panels,Touch Screens and Optical Displays
Film Systems 07:Optical brochure 4pp 10/06/2013 15:38 Page 2
MacDermid Autotype is at the forefront of film coatingtechnology for the electronics industry and has establisheditself as a market leader with its film range for theMembrane Touch Switch (MTS) and Electronic Displaymarket. The unique properties of MacDermid Autotypefilms enable MTS keypads to operate with total reliability ineven the most hazardous or demanding environments,providing durable and effective solutions for a diverse rangeof industrial and domestic applications.
The product range comprises speciality films withantimicrobial protection, resistance to UV light andhumidity, anti-reflection, antiglare, textured and glossfinishes. Most films can easily integrate windows andembossed switches and are available with a variety ofprimers for screen printing, ink jet and digital printing.
Autotex Film Range
Autotex is a range of screen printable, textured polyesterfilms designed to offer a tough and durable but tactilesurface for use on MTS overlays, fascia panels and productnameplates. Autotex films offer the MTS designer completeflexibility. They are extremely durable offering resistance toscratching, scuffing, chemicals and solvents and can beembossed providing extensive switch life performance. Togive total design flexibility Autotex can be selectivelyprinted with Windotex lacquer to provide transparent glossor antiglare windows.
AutotexAutotex is available in Fine and Velvet finishes in a range ofthicknesses and with solvent and UV ink primer options forscreen printing.
Autotex AMAutotex AM offers the additional benefit of provenMicroban® antimicrobial technology developed to improvehygiene and reduce the risk of spreading infections.Microban® protection is a trusted system that inhibits thegrowth of potentially harmful bacteria, mould and mildewover the life of the film.
Autotex XEAutotex XE has been specifically developed for outdoor use.It is capable of withstanding high temperatures and highhumidity conditions as well as UV light.
Autotype Film Systems
Autotex Ink JetAutotex Ink Jet can be digitally printed with a wide range ofink jet inks offering the printer design flexibility for short andmedium print runs, proofing capability and extending theuse of Autotex into the digital print market.
WindotexWindotex is a screenprintable UV curable windowprinting lacquer available ingloss and antiglare finishes.Windotex is designed for usewith Autotex and producesclear, attractive displaywindows that are bothscratch and chemicalresistant.
Film Systems 07:Optical brochure 4pp 10/06/2013 15:38 Page 3
• Membrane touch switches
• Fascia panels
• Electronic displays
• Circuitry
• Automotive instrument panels
• Diagnostic test strips
• Smart cards
• Mobile phone lenses
• Nameplates and decals
Key Applications
Autoflex Film Range
Autoflex is a range of hard coated polyester andpolycarbonate films available in gloss and antiglare finishes.Both film types are screen printable and receptive toFototex, the Autotype texturing lacquers. Autoflex films areused in a wide range of products including flat paneldisplay units, touch screens, mobile phone lens applications,smart cards, electro luminescent lamp displays and MTS.These applications require the film to be tough, durable butoffer exceptional clarity and cosmetic quality. Autoflex filmsmeet these requirements.
Autoflex EBAutoflex EB is a hard coated polyester film range developedto offer a combination of high abrasion, chemical andsolvent resistance, together with excellent optical propertiesand flexibility. These films can be embossed whilst offeringextended switch life. Available in gloss and antiglare finishesand with solvent and UV ink primer options for screenprinting.
Autoflex PCAutoflex PC is a hard coated polycarbonate film rangeproviding a high level of scratch resistance, outstandingclarity, low haze and low yellowness even in films with athickness in excess of 500 micron. Autoflex PC is availablewith a gloss or antiglare finish.
FototexFototex is a UV curable texturing lacquer designed for usewith all Autoflex films or uncoated polycarbonate. Fototexoffers a simple and cost effective method for producing arange of surface textures. When printed on automotivedials Fototex can be used to produce flat matt, nonreflective finishes. Fototex is available in a range of finishesfor conventional UV curing units or Linde type/Nitrogencuring units.
Print & PeelPrint & Peel is a water based, screen printable lacquerdesigned to be selectively printed onto a wide range ofsurface finishes to act as an easily removable protectivemask. Print & Peel is the alternative solution toexpensive and difficult to position over laminates. Itprotects surfaces from scratches and scuffs duringproduction processes and shipment.
Heat Stabilised Films
AutostatAutostat is a heat stabilized polyester film used for thecircuitry layers in membrane touch switches, keyboards,keypads and diagnostic test strips. Heat stabilizationallows the circuit printer to cure conductive inks at hightemperatures with minimal effect on the registration orthe lay-flat characteristics of the film. Autostat isavailable in a wide range of base films, offering excellentstability and flatness with an absence of surfaceimperfections.
Film Systems 07:Optical brochure 4pp 10/06/2013 15:38 Page 4
Autotype Film Systems
It takes more than innovation, high performance productsand superior technical service to help our customerscompete and win in today’s global market place. It takes a total commitment to understand their needsand the ability to provide the right solutions – every time.
When success is your only goal, trust the company that says “Yes We Can”.
The information and recommendations contained in the Company’s literature or elsewhere are based on knowledge at thetime of printing and are believed to be accurate. Whilst such details are printed in good faith they are intended to be a guideonly and shall not bind the Company. Due to constant development, customers are urged to obtain up-to-date technicalinformation from representatives of the Company and not to rely exclusively on printed material. Customers are reminded of the importance of obtaining and complying with the instructions for the handling and use of chemicals and materialssupplied as the Company cannot accept responsibility for any loss or injury caused through non-compliance.
© 2006 MacDermid, Inc. All rights reserved. All trademarks are the property of their respective owners.1240/25488/0107
MacDermid Autotype LimitedGrove Road, Wantage OX12 7BZ, UKTel: +44 (0) 1235 771111 Fax: +44 (0) 1235 771196
MacDermid Autotype Pte LtdNo. 20 Tuas Avenue 6, Singapore 639307Tel: +65 689 79670 Fax: +65 686 31025
MacDermid Autotype Inc.701 Industrial Dr.Middletown, DE 19709, USATel: +1 302-378-3100 Fax: +1 302-378-3123
www.macdermidautotype.com
Product
Autotex
Autotex AM
Autotex XE
Autotex Ink Jet
Windotex
Autoflex EB
Autoflex PC
Fototex
Autostat
Print & Peel
Surface Finish
Fine, Velvet
Fine
Fine, Velvet
Fine
Gloss, Antiglare
Gloss, Antiglare
Gloss, Antiglare
UV Matt, N Matt,N Supermatt
Clear, Hazy, White
NA
Gauge
150µ, 200µ, 280µ
150µ, 200µ
150µ, 200µ, 280µ
150µ
NA
130µ, 180µ, 250µ
180µ, 250µ, 380µ,480µ, 640µ, 750µ
NA
75µ, 100µ, 125µ, 175µ,250µ, 350µ, 500µ
NA
Available Ink Primers
Solvent, UV
Solvent, UV
Solvent, UV
Ink Jet
NA
Solvent, UV
Solvent
NA
Silver, Dielectric, Carbon
NA
Product Range
MacDermid Autotype is a global company with its headquarters in the UK. It also operate facilities in the USA, Singaporeand China all providing local customer support and technical staff to respond to specific customer needs around theworld.
MacDermid Autotype is committed to a programme of continuous improvement and development; in 1989accreditation to BS EN ISO 9001 was achieved. In 1994 and again in 2005, the company was conferred with the Queen'sAward for Technology and in 1996 MacDermid Autotype became one of the first companies in its field to achieveISO14001, the environmental management standard.
Individual Technical PDF data sheets are available on request.
Film Systems 07:Optical brochure 4pp 10/06/2013 15:38 Page 1
Recommended