View
6
Download
0
Category
Preview:
Citation preview
Automation systemsDrive solutions
ControlsInvertersMotorsGearboxesEngineering Tools
Motors:MF three-phase AC motors
Gearboxes:GSThelical gearboxes,GFL shaft-mountedhelical gearboxes
L-force catalogue
!Änderung!The GST03 gearbox has beenreplaced by the new, iden�callyconstructed g500-H45 gearbox.Do not order the GST03 anymore.
h�p://www.lenze.com !
Lenze makes many things easy for you.About Lenze
Amatter of principle: the right products for every application.
L-force product portfolio
1.1Controller-based AutomationAutomation systems
1.2Drive-based automation
2.1HighLine tasksDrive solutions
2.2StateLine tasks
2.3BaseLine tasks
3.1Controller 3200 CCabinet ControllerControls
3.2I/O system 1000
3.3Controller p500Panel Controller
3.4Monitor Panel'
4.1Inverter Drives 8400 protecDecentralisedInverters
4.2Inverter Drives 8400 motec
4.3Inverter Drives SMV IP65
4.4Servo Drives 9400 HighLineCabinet
4.5Inverter Drives 8400 TopLine
4.6Servo Inverters i700
4.7Inverter Drives 8400 HighLine
4.8Inverter Drives 8400 StateLine
4.9Inverter Drives SMV IP31
4.10Inverter Drives 8400 BaseLine
5.1MCS synchronous servo motorsServo motorsMotors
5.2MD☐KS synchronous servo motors
5.3MQA asynchronous servo motors
5.4MCA asynchronous servo motors
5.5MF three-phase AC motorsThree-phase AC motors
5.6MH three-phase AC motors
5.7MD three-phase AC motors
5.8m300 Lenze Smart Motor
5.9MD/MH basic three-phase AC motors
6.1g700-P planetary gearboxAxial gearboxGearboxes
6.2MPR/MPG planetary gearboxes
6.3g500-H helical gearbox
6.4GST helical gearboxes
6.5g500-S shaft-mounted helical gearbox
6.6GFL shaft-mounted helical gearboxes
6.7g500-B bevel gearboxRight-angle gearbox
6.8GKR bevel gearboxes
6.9GKS helical-bevel gearboxes
6.10GSS helical-worm gearboxes
6.11Assignment see aboveMotor data
7.1NavigatorEngineering Tools
7.2Drive Solution Designer
7.3Drive Solution Catalogue
7.4Engineer
7.5PLC Designer
7.6VisiWinNET®
7.7EASY Starter
Selected portfolio
Additional portfolio
Contents of the L-force catalogue
Lenze makes manythings easy for you.Withourmotivated and committed approach,weworktogether with you to create the best possible solutionand set your ideas inmotion - whether you are lookingto optimise an existingmachine or develop a new one.We always strive to make things easy and seek perfec-tion therein. This is anchored in our thinking, in ourservices and in every detail of our products. It's as easyas that!
321
Implementing solutionsDrafting conceptsDeveloping ideas
Our easy formula for satisfied customers isto establish an active partnership with fast
We seewelcome challenges in yourmachinetasks, supporting youwith our comprehens-
Are you looking to build the best machinepossible and alreadyhave some initial ideas?
decision-making processes and an individu-ive expertise andproviding valuable impetusThenget thesedownonpaper togetherwithally tailored offer. We have been using thisfor your innovations. We take a holistic viewus, startingwith small innovative details andsimple principle to meet the ever more spe-of the individual motion and control func-stretching all the way to completely newcialised customer requirements in the fieldof mechanical engineering for many years.
tions here and draw up consistent, end-to-end drive and automation solutions for you
machines.Working together,wewill developan intelligent and sustainable concept that
- keeping everything as easy as possible andas extensive as necessary.
is perfectly alignedwith your specific require-ments.
54
Ensuring productivityManufacturing machines
Productivity, reliability andnewperformancepeaks on a daily basis – these are our key
Functional diversity in perfect harmony: asone of the few full-range providers in the
success factors for yourmachine. After deliv-market, we can provide you with preciselyery, we offer you cleverly devised servicethoseproducts that youactually need for anyconcepts to ensure continued safe operation.machine task – no more and no less. Our L-The primary focus here is on technical sup-force product portfolio, a consistent platformport, based on the excellent application ex-for implementing drive and automation
tasks, is invaluable in this regard. pertise of our highly-skilled and knowledge-able after-sales team.
Amatter of prin-ciple:the right productsfor every application.
Lenze's extensive L-force product portfolio follows avery simple principle. The functions of our finely scaledproducts areassigned to the three linesBase-Line, State-Line or High-Line.
But what does this mean for you? It allows you toquickly recognise which products represent the bestsolution for your own specific requirements.
Powerful products with a major impact:• Easy handling• High quality and durability• Reliable technologies in tunewith the latest develop-ments
Lenze products undergo the most stringent testing inour own laboratory. This allows us to ensure that youwill receive consistently high quality and a long servicelife. In addition to this, five logistics centres ensure thatthe Lenze products you select are available for quickdelivery anywhere across the globe. It's as easy as that!
Controls
Engineering Tools
L-force product portfolio
Inverters
L-force product portfolio
Motors
L-force product portfolio
Gearboxes
L-force product portfolio
GST helicalgearboxes0.55 to 22 kW
Gearboxes
6.4 - 4List of abbreviationsGeneral information
6.4 - 5Product key
6.4 - 7Product information
6.4 - 8Functions and features
6.4 - 13Dimensioning
6.4 - 18Notes on ordering
6.4 - 19Ordering details checklist
6.4 - 23Permissible radial and axial forces at outputTechnical data
6.4 - 27Output backlash in angular minutes
6.4 - 29Moments of inertia
6.4 - 36Weights
6.4 - 42Selection tables
6.4 - 78Dimensions
6.4 - 97GST☐☐-2/3M VARAccessories
6.4 - 98GST☐☐-2/3M VAL
6.4 - 99Ventilations
GST helical gearboxesContents
6.4
List of abbreviations
Communauté EuropéenneCEEfficiencyηc=1Canadian Standards AssociationCSALoad capacitycDeutsches Institut für Normung e.V.DINRated frequency[Hz]fNElectromagnetic compatibilityEMCMax. axial force[N]Fax,maxEuropean standardENMax. radial force[N]Frad,maxInternational Electrotechnical CommissionIECSite altitude[m]HmaxInternational Mounting CodeIMRatioiInternational Protection CodeIPMoment of inertia[kgcm²]JNational Electrical Manufacturers AssociationNEMAMass[kg]mUnderwriters Laboratory Listed ProductULOutput torque[Nm]M2Underwriters Laboratory Recognized ProductUROutput speed[r/min]n2Verband deutscher Elektrotechniker (Associationof German Electrical Engineers)
VDERated speed[r/min]nNRated power[kW]PN
China Compulsory CertificateCCCTransition operating frequency[1/h]ShüCertificate for Russian FederationGOSTMax. ambient operating temperature[°C]Topr,maxCombined certification marks of UL for the USAand Canada
cURusMin. ambient operating temperature[°C]Topr,minRated voltage[V]UN, Δ
Certificate for UkraineUkrSEPRORated voltage[V]UN, Y
V00-en_GB-12/20136.4 - 4
GST helical gearboxesGeneral information
6.4
Product key
6.4 - 5V00-en_GB-12/2013
GST helical gearboxesGeneral information
6.4
Product key
Mounting position (A...F) and position of system blocks (1...6)
Terminal box / motec: 2, 3, 4, 5
Gearbox designs
OptionsBasic versions
Standard efficiencyMotor efficiency OKS-G (primer: grey) for GST03-2Surface and corrosionprotection OKS-S (special paint according to RAL)Increased efficiency (IE2)
OKS-M (special paint according to RAL)No OKS (unpainted, aluminium housing)for GST03
Surface and corrosionprotection OKS-L (special paint according to RAL)
CLP HC 320 (synthetic)LubricantOKS-G (primer: grey)OKS-S (paint: RAL 7012) CLP HC 220 USDA H1 (synthetic)
CLP 460 (mineral)Lubricant Driven shaft: VitonShaft sealing rings
Driven shaft: reinforced for GST04 ... 09-2/3
BearingsOil control plugs for GST05 ... 14Breather elements for GST06 … 14
Ventilation
Breather elements for GST05VentilationCompensation reservoir for GST09 ... 14-2in mounting position C
Metal nameplate (supplied loose)NameplateAdhesive nameplate (supplied loose)
V00-en_GB-12/20136.4 - 6
GST helical gearboxesGeneral information
6.4
Product information
DesignsLenze provides a geared motor construction kit, which covers a widerangeof requirements. Numerous drive-side andoutput-side optionsenable precise adaptationof thedrive to the specific application. This • 1-stage, 2-stage and 3-stage gearboxesis the basis for versatile applications and functional scalability of ourgearboxes and geared motors.
• Solid shaft with keyway• Foot or flange mounting
The modular concept and high power density make extremely com-pact sizespossible.Optimised teethprofiles andgroundgears ensure
• With MF three-phase AC motors (inverter-optimised)power range 0.55 … 22 kW
low-noise operation and lowbacklash. The gearboxes are of compactand hence space-saving construction.
Robust design with high efficiency
Together with three-phase AC motors, our helical gearboxes form acompact and powerful drive unit. They are rugged in design and fea-ture high permissible radial forces, closely stepped speed reductionratios and minimum backlash. The gearboxes are available as 1 and2 and 3-stage versions with a torque of up to 5,920 Nm and a ratioof up to i= 435.
Inverters for motor-proximity installation
The Drive Package with decentralised Inverter Drives 8400 moteccovers a power range up to 7.5 kW.
Helical geared motor GST07-2M VBR 100-32
6.4 - 7V00-en_GB-12/2013
GST helical gearboxesGeneral information
6.4
Functions and features
Gearbox type
GSTHousing
CuboidDesign
Aluminium / cast ironMaterialSolid shaft
with keyway to DIN 6885Design
m6 (d > 50 mm)Tolerancek6 (d ≤ 50 mm)
Tempered steel C45 or 42CrMo4MaterialHollow shaft
Design
Tolerance
MaterialToothed parts
Optimised tooth flanks and profile geometryDesignGround tooth flanks
Case-hardened steelMaterialShaft-hub joint
1st stage/prestage/helical (bevel) gearbox: Friction-type connectionOutput stage (= 2nd, 3rd or 4th stage): Friction-type or positive-fit connection
Shaft sealing rings
With dust lipDesign
NB / FPMaterialBearing
Ball bearing / tapered-roller bearing depending on size and designDesignLubricants
DIN 51502Standard
corresponding to mounting position (see operating instructions)QuantitiesMechanical efficiency
0.981-stage gearboxes [ηc=1]0.972-stage gearboxes [ηc=1]0.953-stage gearboxes [ηc=1]
4-stage gearboxes [ηc=1]Notes
V00-en_GB-12/20136.4 - 8
GST helical gearboxesGeneral information
6.4
Functions and features
Lubricants
Lenze gearboxes and gearedmotors are ready for operation on deliv-ery and are filled with lubricants specific to both the drive and thedesign. The mounting position and design specified in the order arekey factors in choosing the volume of lubricant.
The lubricants listed in the lubricant table are approved for use inLenze drives.
Lubricant table
Mode
CLP HC 220CLP HC 320CLP 460USDA H1-20 … +40-25 … +500 … +40Ambient temperature [°C]
Synthetic-based oil (synthetic hydrocarbon / poly-alpha-olefin oil)Mineral based oil with additivesSpecificationFor food processing industryNote
16000 operating hours25000 operating hours16000 operating hoursChanging intervalnot later than after three years (oil
temperature 70...80 °C)not later than after three years (oil
temperature 70...80 °C)not later than after three years (oil
temperature 70...80 °C)bremer & leguilFuchs RenolinFuchs RenolinFuchs
Cassida Fluid GL 220Unisyn CLP 320CLP 460KlüberoilKlübersynthKlüberoilKlüber
4 UH1-220 NGEM4-320 NGEM1-460 NShell OmalaShell OmalaShellOil HD 320460
ƒ Please contact your Lenze office if you are operating at ambienttemperatures in areas up to < -20 °C > or up to +40°C.
6.4 - 9V00-en_GB-12/2013
GST helical gearboxesGeneral information
6.4
Functions and features
Surface and corrosion protection
Various surface coatings combined with other protective measuresensure that the geared motors operate reliably even at high air hu-
Foroptimumprotectionofgearedmotors against ambient conditions,the surface and corrosion protection system (OKS) offers tailor-madesolutions. midity, in outdoor installations or in the presence of atmospheric
impurities. Any colour from the RAL Classic collection can be chosenfor the top coat. The geared motors are also available unpainted (nosurface and corrosion protection).
MeasuresApplicationsSurface and corrosion protec-tion system
Catalogue textCatalogue text
OKS-G(primed)
•
•
1K priming coat (grey)
Dependent on subsequenttop coat applied
• Zinc-coated screws• Rust-free breather elementsOptional measures• Stainless steel nameplate
OKS-S(small)
••
Surface coating as per corrosivity category C1 (in line with EN 12944-2)Standard applications
• Internal installation inheatedbuildings
• Zinc-coated screws
••
Air humidity up to 90%Rust-free breather elements
Optional measures• Stainless steel nameplate
OKS-M(medium)
•
•
Surface coating as per corrosivity category C2 (in line with EN 12944-2)
Internal installation in non-heated buildings
•
•
Zinc-coated screws
Covered, protected externalinstallation
• Rust-free breather elementsOptional measures
• Air humidity up to 95%• Stainless steel shaft• Stainless steel nameplate• Rust-free shrink disc (on request)
OKS-L(high)
•
•
Surface coating as per corrosivity category C3 (in line with EN 12944-2)
External installation• Air humidity above 95%
•
•
Blower cover and B end shield additionally primed
Chemical industry plants•
•
Food industry
Cable glands with gaskets• Corrosion-resistant brake with cover ring, stainless friction plate, andchrome-plated armature plate (on request)
• All screws/screw plugs zinc-coated• Stainless breather elements• Threaded holes that are not used are closed by means of plastic plugsOptional measures• Sealed recesses on motor (on request)• Stainless steel shaft• Stainless steel nameplate• Rust-free shrink disc (on request)• Additional priming coat on cast iron fan• Oil expansion tank and torque plates painted separately and suppliedloose
V00-en_GB-12/20136.4 - 10
GST helical gearboxesGeneral information
6.4
Functions and features
Structure of surface coating
ColourSurface coatingCorrosivity categorySurface and corrosion protec-tion system
StructureDIN EN ISO 12944-2
Dipping primed gearboxWithout OKS(uncoated)
Dipping primed gearbox1K priming coat
OKS-G(primed)
Standard: RAL 7012Optional: RAL Classic
Dipping primed gearbox2K-PUR top coat
C1OKS-S(small)
Standard: RAL 7012Optional: RAL Classic
Dipping primed gearbox1K priming coatC2
OKS-M(medium)
2K-PUR top coat
Standard: RAL 7012Optional: RAL Classic
Dipping primed gearbox2K-EP priming coatC3
OKS-L(high)
2K-PUR top coat
ƒ The gearboxes GST 03 have an aluminium housing, therefore adipping primer is dispensed with in the case of these gearboxes.
6.4 - 11V00-en_GB-12/2013
GST helical gearboxesGeneral information
6.4
Functions and features
Ventilation
Gearboxes without ventilationNo ventilation is required for gearboxes GST03 ... 04.
Gearboxes that may optionally be equipped with ventilationSpecialmeasures arenotusually requiredwhenusinggearboxGST05.In borderline cases, e.g. at input speeds >2000 r/min,we recommendthe use of breather elements which we can supply if required.
Gearboxes with ventilationGearboxes GST06…14 are supplied with breather elements as stand-ard.
Special measures for mounting position C (motor on top)We recommend that an oil compensation reservoir is always usedwith gearbox sizes G☐☐09...14 in this mounting position. This reser-voir can be purchased as an option. For illustrations and measuressee accessories chapter.
This is not required at higher ratios or low input speeds. Please contactLenze in this event.
V00-en_GB-12/20136.4 - 12
GST helical gearboxesGeneral information
6.4
Dimensioning
General information about the data provided in this catalogue
Powers, torques and speedsThe powers, torques and speeds specified in this catalogue are roun-ded values and are valid under the following conditions:• Operating time/day = 8 h (100% OT)• Duty class I for up to 10 switching operations/h• Mounting positions and designs in this catalogue• Standard lubricant• Tamb = 20 °C for gearboxes,Tamb = 40 °C for motors (in accordance with EN 60034)
• Site altitude < = 1000 m amsl• The selection tables provide the permissible mechanical powersand torques. For notes on the thermal power limit, see chapterdrive dimensioning.
• The rated power specified for motors and geared motors appliesto operating mode S1 (in accordance with EN 60034).
Under different operating conditions, the values obtained may varyfrom those listed here.In the case of extreme operating conditions, please consult yourLenze sales office.
6.4 - 13V00-en_GB-12/2013
GST helical gearboxesGeneral information
6.4
Dimensioning
Thermal power limit
The thermal power limit is affected by:The thermal power limit, defined by the heat balance, limits the per-missible gearbox continuous power. It may be less than themechan-ical power ratings listed in the selection tables.
• the churning losses in the lubricant. These are determined by themounting position and the circumferential speed of the wheels
• the load and the speed• the ambient conditions: temperature, air circulation, input or dis-sipation via shafts and the foundation
Please consult your Lenze subsidiary• if the following input speeds n 1 are exceeded on a continuousbasis (continuous is defined as more than 8 h/day):
Mounting position C, DMounting position A, B, E, FMotor frame size
3000 r/min3000 r/min063 ... 100
1500 r/min3000 r/min112 ... 132
1500 r/min2000 r/min160 ... 225
• if the following input speeds n 1 are exceeded:
Mounting position C, DMounting position A, B, E, FMotor frame size
3000 r/min4000 r/min063 ... 100
2000 r/min4000 r/min112 ... 132
1500 r/min3000 r/min160 ... 225
• or if you are using the following gearbox type, size and ratio com-binations at an input speed of n 1 > 1500 r/min:
Ratio iGearbox sizeGearbox type
≤ 1007, 09, 11, 14GST helical gearbox
Possible ways of extending the application area
• synthetic lubricant (option)• shaft sealing rings made from FP material/Viton (option)• reduction in lubricant quantity• cooling of the geared motor by means of air convection on themachine/system
V00-en_GB-12/20136.4 - 14
GST helical gearboxesGeneral information
6.4
Dimensioning
Load capacity and application factor
Application factor k (according to DIN 3990)Load capacity c of gearboxTakes into account the influence of temporally variable loads whichare actually present during the anticipated operating time of gear-boxes and geared motors.
Rated value for the load capacity of Lenze geared motors.• c is the ratio of the permissible rated torque of the gearbox to therated torque supplied by the drive component (e.g. the built-inLenze motor). k is determined by:
• The value of cmust always be greater than the value of the applic-ation factor k calculated for the application.
• the type of load• the load intensity• temporal influences
Load typeDuty class
Smooth operation, small or light joltsI
Uneven operation, average joltsII
Uneven operation, severe jolts and/or alternating loadIII
Application factor k
6.4 - 15V00-en_GB-12/2013
GST helical gearboxesGeneral information
6.4
Dimensioning
Torque derating at lowmotor frequencies
Motor size-dependent torque reduction, taking into account thethermal response during operation on the inverter.
Torque characteristics
A = Operation with integral fan and brakeB = Operation with integral fan and brake control "Holding currentreduction"
ƒ Themotor specifications stated in this catalogue for inverter op-eration apply to operationwith a Lenze inverter. If you are uncer-tain, get in touch with the manufacturer of the inverter to askwhether thedevice is capableof driving themotorwith the statedspecifications (e.g. setting range, base frequency).
You can use the Drive Solution Designer for precise drive dimension-ing.
The Drive Solution Designer helps you to carry out a fast and high-quality drive dimensioning.The software includes well-founded and proven knowledge on driveapplications and electro-mechanical drive components.
Please contact your Lenze sales office.
V00-en_GB-12/20136.4 - 16
GST helical gearboxesGeneral information
6.4
Dimensioning
Notes on the selection tables
The selection tables show the available combinations of gearboxtype, number of stages, ratio and motor. The following legend indic-ates the structure of the selection tables.
6.4 - 17V00-en_GB-12/2013
GST helical gearboxesGeneral information
6.4
Notes on ordering
Wewant to be sure that you receive the correct products in goodtime.
To allow us to achieve this we need:• your address and your company data• our product key for the individual products in this catalogue• your delivery date and delivery address
Ordering procedurePlease use the ordering information checklist to ensure that youprovide all the ordering information required for the various products.
Theordering information checklist, theproduct key, thebasic versions,options, mounting position and position of the system blocks will befound in the General – Product key section.
A list of Lenze's worldwide sales offices can be found on the Internet:www.Lenze.com.
V00-en_GB-12/20136.4 - 18
GST helical gearboxesGeneral information
6.4
Ordering details checklist
6.4 - 19V00-en_GB-12/2013
GST helical gearboxesGeneral information
6.4
Ordering details checklist
V00-en_GB-12/20136.4 - 20
GST helical gearboxesGeneral information
6.4
Ordering details checklist
Three-phase AC motors options
6.4 - 21V00-en_GB-12/2013
GST helical gearboxesGeneral information
6.4
Ordering details checklist
Three-phase AC motors options
V00-en_GB-12/20136.4 - 22
GST helical gearboxesGeneral information
6.4
Permissible radial and axial forces at output
Permissible axial forcePermissible radial forceFax,per = Fax,max if Frad = 0Frad,per = min(fw x fα x Frad,max ; fw x Frad,max at n2 ≤ 50 r/min)
If Frad and Fax ≠ 0, please contact Lenze.
Application of forces
Effective direction factor fα at output shaft
GST04...09-1GST03-2
GST11...14-2, 3GST04...09-2, 3
——— Direction of rotation R——— Direction of rotation L
6.4 - 23V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Permissible radial and axial forces at output
Additional load factor fw at output shaft
GST04...09-1, 2, 3GST03-2
GST☐☐-1
n2 [r/min]Size
≤5080125200400600100016002500Gearbox
Max. radial force, Solid shaft
Frad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,max
[N][N][N][N][N][N][N][N][N]
1050105010501050850600440180100GST04
23002300230020001400750550250100GST05
35003500290022001100800800600200GST06
53004700390030001900130012001000700GST07
950090007900620035002500250022001750GST09
Max. axial force, Solid shaft
Fax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,max
[N][N][N][N][N][N][N][N][N]
1400140014001400140013001000800600GST04
20002000200020002000200014001100800GST05
25002500250025002500200015001200900GST06
370037003700370033002700200016001200GST07
700070007000700068005700430034002500GST09
ƒ Application of force Frad: centre of shaft journal (x = l/2)ƒ Fax,max only valid with Frad = 0
V00-en_GB-12/20136.4 - 24
GST helical gearboxesTechnical data
6.4
Permissible radial and axial forces at output
GST☐☐-2 / 3 with standard bearings
n2 [r/min]Size
≤162540631001602504006301000Gearbox
Max. radial force, Solid shaft
Frad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,max
[N][N][N][N][N][N][N][N][N][N]
1500150014001100920800710630300100GST03
26502650265025002100170014501250950730GST04
3900390038003500300026002200195015001150GST05
43504350435043003600310026002350750140GST06
950091007600640054004500380034002050140GST07
115001150011500115001150094007600680019501500GST09
21000210002100021000210002100019000170001440011500GST11
40000400004000039000360003100027000240002070016600GST14
Max. axial force, Solid shaft
Fax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,max
[N][N][N][N][N][N][N][N][N][N]
1000100010001000900800700600400300GST03
20002000200020002000165013001100800600GST04
3600360036003600310026502300200016001200GST05
480048003600260018001250900850600500GST06
7000700070005300390029002200190015001100GST07
1200012000110008100560040002800230018001300GST09
16000160001600016000140001100010000950076005700GST11
2000020000200002000020000180001600015000120009000GST14
ƒ Application of force Frad: centre of shaft journal (x = l/2)ƒ Fax,max only valid with Frad = 0
6.4 - 25V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Permissible radial and axial forces at output
GST☐☐-2 / 3 with reinforced bearing
n2 [r/min]Size
≤162540631001602504006301000Gearbox
Max. radial force, Solid shaft (reinforced bearings))
Frad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,max
[N][N][N][N][N][N][N][N][N][N]
3750375037503750375035503150285023501900GST04
5400540054005400540054005400490039503350GST05
7700770077007700770077007000630051004250GST06
1300013000130001300012500105009500850068505650GST07
17000170001700017000170001700017000165001400011300GST09
Max. axial force, Solid shaft (reinforced bearings))
Fax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,max
[N][N][N][N][N][N][N][N][N][N]
2500250025002500250022001900170013001000GST04
4500450045004500450043003900360028002100GST05
5700570057005700490042003600350028002100GST06
9000900090009000830071006100550044003300GST07
1400014000140001400012500105009000800064004800GST09
ƒ Application of force Frad: centre of shaft journal (x = l/2)ƒ Fax,max only valid with Frad = 0
V00-en_GB-12/20136.4 - 26
GST helical gearboxesTechnical data
6.4
Output backlash in angular minutes
ƒ Backlash ϕ depending on ratio i
GST04...09-1
GST03-2
6.4 - 27V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Output backlash in angular minutes
ƒ Backlash ϕ depending on ratio i
GST04...14-2
GST05...14-3
V00-en_GB-12/20136.4 - 28
GST helical gearboxesTechnical data
6.4
Moments of inertia
GST☐☐-1
ƒ Moment of inertia (J) depending on ratio i
GST05GearboxGST04Gearbox0.267[kgcm²]J1.600 0.760[kgcm²]J1.600
0.549[kgcm²]J2.0480.194[kgcm²]J2.0480.172[kgcm²]J2.240 0.480[kgcm²]J2.240
0.354[kgcm²]J2.8570.126[kgcm²]J2.8570.099[kgcm²]J3.500 0.272[kgcm²]J3.500
0.175[kgcm²]J4.5560.067[kgcm²]J4.4000.047[kgcm²]J5.667 0.129[kgcm²]J5.667
0.062[kgcm²]J7.3330.031[kgcm²]J7.1820.022[kgcm²]J9.000 0.060[kgcm²]J8.900
0.039[kgcm²]J11.3750.013[kgcm²]J11.857
GST07GearboxGST06Gearbox2.010[kgcm²]J1.600 6.120[kgcm²]J1.625
4.780[kgcm²]J2.0001.460[kgcm²]J2.0481.270[kgcm²]J2.240 4.020[kgcm²]J2.240
2.690[kgcm²]J2.8570.969[kgcm²]J2.8570.736[kgcm²]J3.500 2.150[kgcm²]J3.500
1.370[kgcm²]J4.5560.481[kgcm²]J4.5560.359[kgcm²]J5.667 1.050[kgcm²]J5.583
0.664[kgcm²]J7.3330.226[kgcm²]J7.3330.167[kgcm²]J8.900 0.494[kgcm²]J8.900
0.320[kgcm²]J11.2500.109[kgcm²]J11.250
GST09Gearbox22.200[kgcm²]J1.56015.600[kgcm²]J2.04812.200[kgcm²]J2.3339.580[kgcm²]J2.8107.300[kgcm²]J3.4444.600[kgcm²]J4.6673.510[kgcm²]J5.6672.260[kgcm²]J7.3331.660[kgcm²]J8.9001.110[kgcm²]J11.250
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
6.4 - 29V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Moments of inertia
GST☐☐-2
ƒ Moment of inertia (J) depending on ratio i
GST04GearboxGST03Gearbox0.260[kgcm²]J2.597 0.337[kgcm²]J2.956
0.324[kgcm²]J3.3330.169[kgcm²]J3.4130.117[kgcm²]J4.368 0.312[kgcm²]J4.053
0.300[kgcm²]J4.5710.179[kgcm²]J5.3120.173[kgcm²]J5.965 0.222[kgcm²]J5.187
0.215[kgcm²]J5.8500.122[kgcm²]J6.9820.119[kgcm²]J7.840 0.189[kgcm²]J6.400
0.264[kgcm²]J7.0400.089[kgcm²]J8.9350.086[kgcm²]J10.033 0.257[kgcm²]J8.000
0.193[kgcm²]J9.0100.059[kgcm²]J11.4290.057[kgcm²]J12.833 0.170[kgcm²]J9.856
0.166[kgcm²]J11.2000.041[kgcm²]J14.8360.040[kgcm²]J16.660 0.126[kgcm²]J12.571
0.123[kgcm²]J14.2860.028[kgcm²]J19.0130.027[kgcm²]J21.350 0.098[kgcm²]J15.400
0.097[kgcm²]J17.5000.019[kgcm²]J24.5950.019[kgcm²]J27.618 0.063[kgcm²]J19.360
0.062[kgcm²]J22.0000.012[kgcm²]J32.0000.012[kgcm²]J35.933 0.044[kgcm²]J24.933
0.043[kgcm²]J28.3330.008[kgcm²]J41.4550.008[kgcm²]J46.550 0.030[kgcm²]J31.600
0.030[kgcm²]J35.9090.005[kgcm²]J52.9090.005[kgcm²]J59.413 0.021[kgcm²]J39.600
0.021[kgcm²]J45.0000.013[kgcm²]J52.1710.013[kgcm²]J59.286
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
V00-en_GB-12/20136.4 - 30
GST helical gearboxesTechnical data
6.4
Moments of inertia
GST☐☐-2
ƒ Moment of inertia (J) depending on ratio i
GST06GearboxGST05Gearbox0.986[kgcm²]J2.956 2.720[kgcm²]J3.033
2.610[kgcm²]J3.3330.944[kgcm²]J3.3330.903[kgcm²]J4.053 2.510[kgcm²]J4.160
2.410[kgcm²]J4.5710.864[kgcm²]J4.5710.637[kgcm²]J5.187 1.760[kgcm²]J5.324
1.710[kgcm²]J5.8500.613[kgcm²]J5.8500.533[kgcm²]J6.400 1.470[kgcm²]J6.400
2.070[kgcm²]J7.0400.400[kgcm²]J7.2380.388[kgcm²]J8.163 1.060[kgcm²]J8.163
1.500[kgcm²]J9.0100.543[kgcm²]J9.0100.300[kgcm²]J10.000 0.820[kgcm²]J10.000
1.260[kgcm²]J11.2000.462[kgcm²]J11.2000.178[kgcm²]J13.016 0.955[kgcm²]J12.571
0.932[kgcm²]J14.2860.131[kgcm²]J14.3560.128[kgcm²]J16.190 0.748[kgcm²]J15.400
0.733[kgcm²]J17.5000.271[kgcm²]J17.5000.164[kgcm²]J20.044 0.457[kgcm²]J20.044
0.450[kgcm²]J22.7780.161[kgcm²]J22.7780.119[kgcm²]J24.933 0.332[kgcm²]J24.933
0.326[kgcm²]J28.3330.117[kgcm²]J28.3330.079[kgcm²]J32.267 0.221[kgcm²]J32.267
0.218[kgcm²]J36.6670.078[kgcm²]J36.6670.058[kgcm²]J39.160 0.162[kgcm²]J39.160
0.160[kgcm²]J44.5000.057[kgcm²]J44.5000.039[kgcm²]J50.050 0.110[kgcm²]J49.500
0.108[kgcm²]J56.2500.038[kgcm²]J56.875
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
6.4 - 31V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Moments of inertia
GST☐☐-2
ƒ Moment of inertia (J) depending on ratio i
GST09GearboxGST07Gearbox8.200[kgcm²]J3.048 27.000[kgcm²]J4.056
25.900[kgcm²]J4.4577.920[kgcm²]J3.3507.650[kgcm²]J4.225 18.100[kgcm²]J5.324
17.500[kgcm²]J5.8507.390[kgcm²]J4.6435.640[kgcm²]J5.200 14.200[kgcm²]J6.667
11.300[kgcm²]J7.3055.460[kgcm²]J5.7144.490[kgcm²]J6.400 11.000[kgcm²]J8.027
15.200[kgcm²]J9.0106.270[kgcm²]J7.1506.040[kgcm²]J8.125 12.400[kgcm²]J10.267
12.100[kgcm²]J11.6674.730[kgcm²]J8.8003.900[kgcm²]J9.856 9.790[kgcm²]J12.362
9.530[kgcm²]J14.0483.780[kgcm²]J11.2002.860[kgcm²]J12.571 7.650[kgcm²]J15.156
7.490[kgcm²]J17.2222.790[kgcm²]J14.2862.260[kgcm²]J15.400 4.500[kgcm²]J20.533
4.410[kgcm²]J23.3332.210[kgcm²]J17.5001.380[kgcm²]J20.044 3.380[kgcm²]J24.933
3.320[kgcm²]J28.3331.350[kgcm²]J22.7781.020[kgcm²]J24.567 2.250[kgcm²]J32.267
2.210[kgcm²]J36.6671.010[kgcm²]J27.9170.664[kgcm²]J32.267 1.640[kgcm²]J39.160
1.620[kgcm²]J44.5000.653[kgcm²]J36.6670.487[kgcm²]J39.160 1.120[kgcm²]J49.500
1.100[kgcm²]J56.2500.479[kgcm²]J44.5000.330[kgcm²]J49.5000.325[kgcm²]J56.250
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
V00-en_GB-12/20136.4 - 32
GST helical gearboxesTechnical data
6.4
Moments of inertia
GST☐☐-2
ƒ Moment of inertia (J) depending on ratio i
GST14GearboxGST11Gearbox82.200[kgcm²]J4.056 226.000[kgcm²]J4.225
216.000[kgcm²]J4.64379.000[kgcm²]J4.45755.400[kgcm²]J5.324 168.000[kgcm²]J5.200
161.000[kgcm²]J5.71453.500[kgcm²]J5.85045.700[kgcm²]J6.400 141.000[kgcm²]J6.286
183.000[kgcm²]J7.15067.500[kgcm²]J6.86465.100[kgcm²]J7.800 100.000[kgcm²]J8.027
139.000[kgcm²]J8.80046.800[kgcm²]J9.01040.200[kgcm²]J9.856 75.100[kgcm²]J9.841
119.000[kgcm²]J11.00039.000[kgcm²]J11.20029.400[kgcm²]J12.571 89.000[kgcm²]J12.362
86.600[kgcm²]J14.04828.700[kgcm²]J14.28623.000[kgcm²]J15.400 67.600[kgcm²]J15.156
66.000[kgcm²]J17.22222.500[kgcm²]J17.50014.300[kgcm²]J20.289 45.800[kgcm²]J20.044
44.900[kgcm²]J22.77814.100[kgcm²]J23.05610.600[kgcm²]J24.933 33.200[kgcm²]J24.567
32.600[kgcm²]J27.91710.400[kgcm²]J28.3337.040[kgcm²]J32.267 21.500[kgcm²]J32.267
21.200[kgcm²]J36.6676.930[kgcm²]J36.6675.150[kgcm²]J39.160 15.700[kgcm²]J39.160
15.500[kgcm²]J44.5005.080[kgcm²]J44.5003.520[kgcm²]J49.500 10.600[kgcm²]J49.500
10.500[kgcm²]J56.2503.440[kgcm²]J56.250
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
6.4 - 33V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Moments of inertia
GST☐☐-3
ƒ Moment of inertia (J) depending on ratio i
GST06GearboxGST05Gearbox0.195[kgcm²]J36.267 0.362[kgcm²]J39.200
0.195[kgcm²]J44.0000.141[kgcm²]J46.2590.108[kgcm²]J56.667 0.320[kgcm²]J51.022
0.178[kgcm²]J53.9000.192[kgcm²]J63.4670.073[kgcm²]J71.238 0.114[kgcm²]J67.760
0.160[kgcm²]J70.1560.139[kgcm²]J80.9520.050[kgcm²]J91.746 0.203[kgcm²]J80.952
0.150[kgcm²]J87.2670.107[kgcm²]J99.1670.033[kgcm²]J116.277 0.150[kgcm²]J99.167
0.096[kgcm²]J109.7070.072[kgcm²]J124.6670.023[kgcm²]J145.714 0.096[kgcm²]J124.667
0.063[kgcm²]J141.2890.050[kgcm²]J160.5560.033[kgcm²]J179.067 0.063[kgcm²]J160.556
0.043[kgcm²]J179.0670.014[kgcm²]J191.9730.023[kgcm²]J224.400 0.042[kgcm²]J203.485
0.040[kgcm²]J231.7330.023[kgcm²]J255.0000.014[kgcm²]J295.638 0.029[kgcm²]J255.000
0.027[kgcm²]J290.4000.014[kgcm²]J335.9520.027[kgcm²]J330.0000.026[kgcm²]J382.5900.025[kgcm²]J434.762
GST09GearboxGST07Gearbox0.974[kgcm²]J39.200 2.140[kgcm²]J40.136
1.550[kgcm²]J43.2670.534[kgcm²]J44.0000.843[kgcm²]J51.022 1.530[kgcm²]J49.167
1.380[kgcm²]J53.0440.484[kgcm²]J53.9000.313[kgcm²]J65.079 1.370[kgcm²]J60.278
1.170[kgcm²]J71.8670.431[kgcm²]J70.1560.536[kgcm²]J79.762 1.160[kgcm²]J81.667
0.706[kgcm²]J93.5410.400[kgcm²]J85.9830.399[kgcm²]J97.708 1.070[kgcm²]J99.167
0.652[kgcm²]J113.5850.238[kgcm²]J111.9150.237[kgcm²]J127.176 0.649[kgcm²]J129.074
0.458[kgcm²]J141.2890.166[kgcm²]J139.2110.166[kgcm²]J158.194 0.456[kgcm²]J160.556
0.297[kgcm²]J182.8440.108[kgcm²]J180.1560.107[kgcm²]J204.722 0.295[kgcm²]J207.778
0.275[kgcm²]J236.6220.101[kgcm²]J236.6220.077[kgcm²]J248.458 0.212[kgcm²]J252.167
0.275[kgcm²]J268.8890.101[kgcm²]J268.8890.073[kgcm²]J326.333 0.198[kgcm²]J326.333
0.255[kgcm²]J363.0000.094[kgcm²]J367.0330.067[kgcm²]J417.083 0.183[kgcm²]J412.500
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
V00-en_GB-12/20136.4 - 34
GST helical gearboxesTechnical data
6.4
Moments of inertia
GST☐☐-3
ƒ Moment of inertia (J) depending on ratio i
GST14GearboxGST11Gearbox6.360[kgcm²]J40.816 24.400[kgcm²]J40.185
18.300[kgcm²]J42.5805.660[kgcm²]J44.0005.600[kgcm²]J50.000 18.100[kgcm²]J48.386
20.500[kgcm²]J53.1484.770[kgcm²]J57.9684.080[kgcm²]J61.250 13.200[kgcm²]J59.321
11.500[kgcm²]J69.0423.520[kgcm²]J71.0113.500[kgcm²]J80.694 11.400[kgcm²]J78.457
6.570[kgcm²]J93.5413.220[kgcm²]J87.2673.200[kgcm²]J99.167 10.400[kgcm²]J96.157
6.520[kgcm²]J106.2962.930[kgcm²]J112.9331.940[kgcm²]J129.074 6.000[kgcm²]J130.278
4.420[kgcm²]J139.2111.770[kgcm²]J146.9931.400[kgcm²]J158.194 4.400[kgcm²]J158.194
5.490[kgcm²]J171.1111.290[kgcm²]J180.1560.880[kgcm²]J207.778 2.860[kgcm²]J204.722
2.650[kgcm²]J236.6220.818[kgcm²]J236.6220.633[kgcm²]J252.167 2.060[kgcm²]J248.458
2.650[kgcm²]J268.8890.816[kgcm²]J268.8890.589[kgcm²]J326.333 1.920[kgcm²]J326.333
2.450[kgcm²]J363.0000.756[kgcm²]J363.0000.545[kgcm²]J412.500 1.780[kgcm²]J412.500
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
6.4 - 35V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Weights
GST☐☐-1M VBR
132C32132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
16108[kg]mGST043527191412[kg]mGST05
534031231816[kg]mGST069262494133[kg]mGST07
107766455[kg]mGST09
GST☐☐-1M VCR
132C32132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
15108[kg]mGST043426181311[kg]mGST05
513830211715[kg]mGST068959463829[kg]mGST07
102725951[kg]mGST09
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
V00-en_GB-12/20136.4 - 36
GST helical gearboxesTechnical data
6.4
Weights
GST☐☐-1M VCK
132C32132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
16119[kg]mGST043627191513[kg]mGST05
544133242018[kg]mGST069363504233[kg]mGST07
109796658[kg]mGST09
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
6.4 - 37V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Weights
GST☐☐-2M VAR / VBR
132C12112C22100C32100C12090C32080C32071C32063C32132C22080C42071C42063C42132C32
6[kg]mGST03181210[kg]mGST04
3930221816[kg]mGST05594638292523[kg]mGST06
10474615345[kg]mGST071311018880[kg]mGST09176146134[kg]mGST11265238[kg]mGST14
GST☐☐-2M VCR
132C12112C22100C32100C12090C32080C32071C32063C32132C22080C42071C42063C42132C32
6[kg]mGST03171210[kg]mGST04
3729211614[kg]mGST05574435272220[kg]mGST06
10070574840[kg]mGST07123928071[kg]mGST09161131120[kg]mGST11237210[kg]mGST14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
V00-en_GB-12/20136.4 - 38
GST helical gearboxesTechnical data
6.4
Weights
GST☐☐-2M VCK
132C12112C22100C32100C12090C32080C32071C32063C32132C22080C42071C42063C42132C32
7[kg]mGST03181311[kg]mGST04
3930221816[kg]mGST05604738302523[kg]mGST06
10474615244[kg]mGST07130998778[kg]mGST09171142130[kg]mGST11253226[kg]mGST14
GST☐☐-2M VAL
132C12112C22100C32100C12090C32080C32071C32063C32132C22080C42071C42063C42132C32
191311[kg]mGST044032241917[kg]mGST05
624941322826[kg]mGST0610878655749[kg]mGST071381089587[kg]mGST09186157145[kg]mGST11281254[kg]mGST14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
6.4 - 39V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Weights
GST☐☐-3M VAR / VBR
132C12112C22100C32100C12090C32080C32071C42071C32063C32132C22080C42063C42132C32
1916[kg]mGST05342926[kg]mGST06
6961534846[kg]mGST0711410193858078[kg]mGST09
198169156147139[kg]mGST11305274262253[kg]mGST14
GST☐☐-3M VCR
132C12112C22100C32100C12090C32080C32071C42071C32063C32132C22080C42063C42132C32
1715[kg]mGST05312624[kg]mGST06
6556484441[kg]mGST071069384767169[kg]mGST09
183154141132124[kg]mGST11277246234225[kg]mGST14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
V00-en_GB-12/20136.4 - 40
GST helical gearboxesTechnical data
6.4
Weights
GST☐☐-3M VCK
132C12112C22100C32100C12090C32080C32071C42071C32063C32132C22080C42063C42132C32
1916[kg]mGST05342927[kg]mGST06
6960524845[kg]mGST0711310091837876[kg]mGST09
194164151143135[kg]mGST11292262249241[kg]mGST14
GST☐☐-3M VAL
132C12112C22100C32100C12090C32080C32071C42071C32063C32132C22080C42063C42132C32
2018[kg]mGST05373229[kg]mGST06
7365575250[kg]mGST07121108100928785[kg]mGST09
209179166158150[kg]mGST11320290277269[kg]mGST14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
6.4 - 41V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 0.55 kW
n22/n2 = 1 ... 24.0
n1 = 143.3 ... 3440 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
78E84AV☐☐☐5514☐☐0GST04-1M☐☐☐063C322.0484.53.02.31680-29370
78E84AV☐☐☐5514☐☐0GST05-1M☐☐☐063C322.2403.93.02.61536-26864
78E84AV☐☐☐5514☐☐0GST04-1M☐☐☐063C322.8574.14.03.31204-21050
78E84AV☐☐☐5514☐☐0GST04-1M☐☐☐063C323.5003.65.04.0983-17141
84E84AV☐☐☐5514☐☐0GST03-2M☐☐☐063C324.3682.57.04.9788-13733
78E84AV☐☐☐5514☐☐0GST04-1M☐☐☐063C324.4002.97.05.0782-13633
84E84AV☐☐☐5514☐☐0GST04-2M☐☐☐063C325.1874.58.05.8663-11628
78E84AV☐☐☐5514☐☐0GST04-1M☐☐☐063C325.6672.29.06.5607-10625
78E84AV☐☐☐5514☐☐0GST05-1M☐☐☐063C325.6673.29.06.5607-10625
84E84AV☐☐☐5514☐☐0GST05-2M☐☐☐063C326.4003.9107.2538-9422
78E84AV☐☐☐5514☐☐0GST04-1M☐☐☐063C327.1821.8118.2479-8420
78E84AV☐☐☐5514☐☐0GST05-1M☐☐☐063C327.3332.8118.4469-8220
78E84AV☐☐☐5514☐☐0GST06-1M☐☐☐063C327.3333.2118.4469-8220
84E84AV☐☐☐5514☐☐0GST05-2M☐☐☐063C328.1634.5129.2421-7418
78E84AV☐☐☐5514☐☐0GST05-1M☐☐☐063C328.9002.41310387-6716
78E84AV☐☐☐5514☐☐0GST06-1M☐☐☐063C328.9002.81310387-6716
84E84AV☐☐☐5514☐☐0GST03-2M☐☐☐063C328.9351.91310385-6716
78E84AV☐☐☐5514☐☐0GST04-1M☐☐☐063C329.0001.01410382-6716
84E84AV☐☐☐5514☐☐0GST04-2M☐☐☐063C329.8563.41511349-6115
84E84AV☐☐☐5514☐☐0GST03-2M☐☐☐063C3210.0331.81511343-6014
84E84AV☐☐☐5514☐☐0GST04-2M☐☐☐063C3211.2002.71713307-5413
78E84AV☐☐☐5514☐☐0GST06-1M☐☐☐063C3211.2502.21713306-5313
78E84AV☐☐☐5514☐☐0GST05-1M☐☐☐063C3211.3751.21713302-5313
84E84AV☐☐☐5514☐☐0GST03-2M☐☐☐063C3211.4291.61713301-5313
84E84AV☐☐☐5514☐☐0GST04-2M☐☐☐063C3212.5712.81914274-4811
84E84AV☐☐☐5514☐☐0GST03-2M☐☐☐063C3212.8331.51914268-4711
84E84AV☐☐☐5514☐☐0GST04-2M☐☐☐063C3214.2862.22116241-4210
84E84AV☐☐☐5514☐☐0GST05-2M☐☐☐063C3214.3563.22116240-4210
84E84AV☐☐☐5514☐☐0GST03-2M☐☐☐063C3214.8361.32217232-409.7
84E84AV☐☐☐5514☐☐0GST04-2M☐☐☐063C3215.4002.62317223-399.3
84E84AV☐☐☐5514☐☐0GST03-2M☐☐☐063C3216.6601.42519207-368.6
84E84AV☐☐☐5514☐☐0GST04-2M☐☐☐063C3217.5002.12620197-348.2
84E84AV☐☐☐5514☐☐0GST03-2M☐☐☐063C3219.0131.32821181-327.5
84E84AV☐☐☐5514☐☐0GST04-2M☐☐☐063C3219.3602.12922178-317.4
84E84AV☐☐☐5514☐☐0GST03-2M☐☐☐063C3221.3501.23224161-286.7
84E84AV☐☐☐5514☐☐0GST04-2M☐☐☐063C3222.0001.63325156-276.5
84E84AV☐☐☐5514☐☐0GST03-2M☐☐☐063C3224.5951.13628140-245.8
84E84AV☐☐☐5514☐☐0GST04-2M☐☐☐063C3224.9331.73728138-245.8
84E84AV☐☐☐5514☐☐0GST03-2M☐☐☐063C3227.6180.94131125-225.2
84E84AV☐☐☐5514☐☐0GST04-2M☐☐☐063C3228.3331.34232121-215.1
84E84AV☐☐☐5514☐☐0GST05-2M☐☐☐063C3228.3333.04232121-215.1
V00-en_GB-12/20136.4 - 42
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 0.55 kW
n22/n2 = 1 ... 24.0
n1 = 143.3 ... 3440 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
84E84AV☐☐☐5514☐☐0GST04-2M☐☐☐063C3231.6001.34735109-194.5
84E84AV☐☐☐5514☐☐0GST05-2M☐☐☐063C3232.2673.04836107-194.4
84E84AV☐☐☐5514☐☐0GST04-2M☐☐☐063C3235.9091.0534096-174.0
90E84AV☐☐☐5514☐☐0GST05-3M☐☐☐063C3236.2672.2534095-174.0
84E84AV☐☐☐5514☐☐0GST05-2M☐☐☐063C3236.6672.3544194-163.9
84E84AV☐☐☐5514☐☐0GST05-2M☐☐☐063C3239.1602.5584488-153.7
84E84AV☐☐☐5514☐☐0GST06-2M☐☐☐063C3239.1603.1584488-153.7
84E84AV☐☐☐5514☐☐0GST04-2M☐☐☐063C3239.6001.1594487-153.6
84E84AV☐☐☐5514☐☐0GST05-2M☐☐☐063C3244.5002.2665077-143.2
84E84AV☐☐☐5514☐☐0GST04-2M☐☐☐063C3245.0000.9675176-133.2
90E84AV☐☐☐5514☐☐0GST05-3M☐☐☐063C3246.2592.1685174-133.1
84E84AV☐☐☐5514☐☐0GST06-2M☐☐☐063C3249.5002.8735670-122.9
84E84AV☐☐☐5514☐☐0GST05-2M☐☐☐063C3250.0501.5745669-122.9
84E84AV☐☐☐5514☐☐0GST05-2M☐☐☐063C3256.8751.5846461-112.5
90E84AV☐☐☐5514☐☐0GST05-3M☐☐☐063C3256.6671.8836361-112.5
84E84AV☐☐☐5514☐☐0GST06-2M☐☐☐063C3256.2502.8836361-112.6
90E84AV☐☐☐5514☐☐0GST05-3M☐☐☐063C3263.4671.5937054-9.52.3
90E84AV☐☐☐5514☐☐0GST05-3M☐☐☐063C3271.2381.51047948-8.42.0
90E84AV☐☐☐5514☐☐0GST05-3M☐☐☐063C3280.9521.21188943-7.41.8
90E84AV☐☐☐5514☐☐0GST06-3M☐☐☐063C3280.9522.71188943-7.41.8
90E84AV☐☐☐5514☐☐0GST06-3M☐☐☐063C3287.2672.81279639-6.91.6
90E84AV☐☐☐5514☐☐0GST05-3M☐☐☐063C3291.7461.213410138-6.51.6
90E84AV☐☐☐5514☐☐0GST05-3M☐☐☐063C3299.1671.014511035-6.11.5
90E84AV☐☐☐5514☐☐0GST06-3M☐☐☐063C3299.1672.214511035-6.11.5
90E84AV☐☐☐5514☐☐0GST06-3M☐☐☐063C32109.7072.216012131-5.51.3
90E84AV☐☐☐5514☐☐0GST05-3M☐☐☐063C32116.2771.017012830-5.21.2
90E84AV☐☐☐5514☐☐0GST06-3M☐☐☐063C32124.6671.818213828-4.81.2
90E84AV☐☐☐5514☐☐0GST06-3M☐☐☐063C32141.2891.720615624-4.31.0
90E84AV☐☐☐5514☐☐0GST07-3M☐☐☐063C32158.1942.923117522-3.80.9
90E84AV☐☐☐5514☐☐0GST06-3M☐☐☐063C32160.5561.423417721-3.70.9
90E84AV☐☐☐5514☐☐0GST06-3M☐☐☐063C32179.0671.426119819-3.40.8
90E84AV☐☐☐5514☐☐0GST07-3M☐☐☐063C32180.1562.626319919-3.30.8
90E84AV☐☐☐5514☐☐0GST06-3M☐☐☐063C32203.4851.129722517-3.00.7
90E84AV☐☐☐5514☐☐0GST07-3M☐☐☐063C32204.7222.329922617-2.90.7
90E84AV☐☐☐5514☐☐0GST06-3M☐☐☐063C32231.7331.133825615-2.60.6
90E84AV☐☐☐5514☐☐0GST07-3M☐☐☐063C32236.6222.034526115-2.50.6
90E84AV☐☐☐5514☐☐0GST07-3M☐☐☐063C32248.4581.936327414-2.40.6
90E84AV☐☐☐5514☐☐0GST07-3M☐☐☐063C32268.8891.739229713-2.20.5
90E84AV☐☐☐5514☐☐0GST07-3M☐☐☐063C32326.3331.447636011-1.80.4
90E84AV☐☐☐5514☐☐0GST09-3M☐☐☐063C32363.0002.85304019.5-1.70.4
90E84AV☐☐☐5514☐☐0GST07-3M☐☐☐063C32367.0331.35364059.4-1.60.4
6.4 - 43V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 0.55 kW
n22/n2 = 1 ... 24.0
n1 = 143.3 ... 3440 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
90E84AV☐☐☐5514☐☐0GST07-3M☐☐☐063C32417.0831.16094618.3-1.40.3
90E84AV☐☐☐5514☐☐0GST09-3M☐☐☐063C32412.5002.66024568.3-1.50.4
V00-en_GB-12/20136.4 - 44
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 0.75 kW
n22/n2 = 1 ... 24.0
n1 = 141.7 ... 3400 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
78E84AV☐☐☐7514☐☐0GST04-1M☐☐☐063C422.0483.34.03.21661-29369
78E84AV☐☐☐7514☐☐0GST05-1M☐☐☐063C422.2402.95.03.51518-26863
78E84AV☐☐☐7514☐☐0GST04-1M☐☐☐063C422.8573.06.04.41190-21050
78E84AV☐☐☐7514☐☐0GST04-1M☐☐☐063C423.5002.67.05.4971-17141
84E84AV☐☐☐7514☐☐0GST03-2M☐☐☐063C424.3681.89.06.7778-13732
78E84AV☐☐☐7514☐☐0GST04-1M☐☐☐063C424.4002.19.06.8773-13632
78E84AV☐☐☐7514☐☐0GST05-1M☐☐☐063C424.5562.7107.1746-13231
84E84AV☐☐☐7514☐☐0GST04-2M☐☐☐063C425.1873.3117.9655-11627
78E84AV☐☐☐7514☐☐0GST04-1M☐☐☐063C425.6671.6128.8600-10625
78E84AV☐☐☐7514☐☐0GST05-1M☐☐☐063C425.6672.3128.8600-10625
84E84AV☐☐☐7514☐☐0GST05-2M☐☐☐063C426.4002.9139.8531-9422
84E84AV☐☐☐7514☐☐0GST04-2M☐☐☐063C426.4003.2139.8531-9422
78E84AV☐☐☐7514☐☐0GST04-1M☐☐☐063C427.1821.31511473-8420
78E84AV☐☐☐7514☐☐0GST05-1M☐☐☐063C427.3332.11511464-8219
78E84AV☐☐☐7514☐☐0GST06-1M☐☐☐063C427.3332.31511464-8219
84E84AV☐☐☐7514☐☐0GST05-2M☐☐☐063C428.1633.31713417-7417
78E84AV☐☐☐7514☐☐0GST05-1M☐☐☐063C428.9001.71914382-6716
78E84AV☐☐☐7514☐☐0GST06-1M☐☐☐063C428.9002.01914382-6716
84E84AV☐☐☐7514☐☐0GST03-2M☐☐☐063C428.9351.41814381-6716
84E84AV☐☐☐7514☐☐0GST04-2M☐☐☐063C429.0102.61814377-6716
84E84AV☐☐☐7514☐☐0GST04-2M☐☐☐063C429.8562.42015345-6114
84E84AV☐☐☐7514☐☐0GST03-2M☐☐☐063C4210.0331.32115339-6014
84E84AV☐☐☐7514☐☐0GST04-2M☐☐☐063C4211.2002.02317304-5413
84E84AV☐☐☐7514☐☐0GST05-2M☐☐☐063C4211.2002.92317304-5413
78E84AV☐☐☐7514☐☐0GST06-1M☐☐☐063C4211.2501.62318302-5313
84E84AV☐☐☐7514☐☐0GST03-2M☐☐☐063C4211.4291.22318298-5312
84E84AV☐☐☐7514☐☐0GST04-2M☐☐☐063C4212.5712.02619271-4811
84E84AV☐☐☐7514☐☐0GST03-2M☐☐☐063C4212.8331.12620265-4711
84E84AV☐☐☐7514☐☐0GST05-2M☐☐☐063C4213.0162.72720261-4611
84E84AV☐☐☐7514☐☐0GST04-2M☐☐☐063C4214.2861.62922238-429.9
84E84AV☐☐☐7514☐☐0GST05-2M☐☐☐063C4214.3562.32922237-429.9
84E84AV☐☐☐7514☐☐0GST03-2M☐☐☐063C4214.8361.03023229-409.6
84E84AV☐☐☐7514☐☐0GST04-2M☐☐☐063C4215.4001.93224221-399.2
84E84AV☐☐☐7514☐☐0GST05-2M☐☐☐063C4216.1902.63325210-378.8
84E84AV☐☐☐7514☐☐0GST03-2M☐☐☐063C4216.6601.03426204-368.5
84E84AV☐☐☐7514☐☐0GST04-2M☐☐☐063C4217.5001.53627194-348.1
84E84AV☐☐☐7514☐☐0GST03-2M☐☐☐063C4219.0130.93929179-327.5
84E84AV☐☐☐7514☐☐0GST04-2M☐☐☐063C4219.3601.54030176-317.3
84E84AV☐☐☐7514☐☐0GST05-2M☐☐☐063C4220.0443.14131170-307.1
84E84AV☐☐☐7514☐☐0GST04-2M☐☐☐063C4222.0001.24534155-276.4
84E84AV☐☐☐7514☐☐0GST05-2M☐☐☐063C4222.7782.74735149-266.2
6.4 - 45V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 0.75 kW
n22/n2 = 1 ... 24.0
n1 = 141.7 ... 3400 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
84E84AV☐☐☐7514☐☐0GST04-2M☐☐☐063C4224.9331.25138136-245.7
84E84AV☐☐☐7514☐☐0GST05-2M☐☐☐063C4224.9332.65138136-245.7
84E84AV☐☐☐7514☐☐0GST04-2M☐☐☐063C4228.3330.95843120-215.0
84E84AV☐☐☐7514☐☐0GST05-2M☐☐☐063C4228.3332.25843120-215.0
84E84AV☐☐☐7514☐☐0GST04-2M☐☐☐063C4231.6001.06548108-194.5
84E84AV☐☐☐7514☐☐0GST05-2M☐☐☐063C4232.2672.26649105-194.4
84E84AV☐☐☐7514☐☐0GST06-2M☐☐☐063C4232.2672.66649105-194.4
90E84AV☐☐☐7514☐☐0GST05-3M☐☐☐063C4236.2671.6735594-173.9
84E84AV☐☐☐7514☐☐0GST05-2M☐☐☐063C4236.6671.7755693-163.9
84E84AV☐☐☐7514☐☐0GST06-2M☐☐☐063C4236.6672.6755693-163.9
84E84AV☐☐☐7514☐☐0GST05-2M☐☐☐063C4239.1601.8806087-153.6
84E84AV☐☐☐7514☐☐0GST06-2M☐☐☐063C4239.1602.3806087-153.6
84E84AV☐☐☐7514☐☐0GST05-2M☐☐☐063C4244.5001.6916876-143.2
84E84AV☐☐☐7514☐☐0GST06-2M☐☐☐063C4244.5002.5916876-143.2
90E84AV☐☐☐7514☐☐0GST05-3M☐☐☐063C4246.2591.5937074-133.1
84E84AV☐☐☐7514☐☐0GST06-2M☐☐☐063C4249.5002.01017669-122.9
84E84AV☐☐☐7514☐☐0GST05-2M☐☐☐063C4250.0501.11027768-122.8
90E84AV☐☐☐7514☐☐0GST06-3M☐☐☐063C4251.0223.01037767-122.8
90E84AV☐☐☐7514☐☐0GST06-3M☐☐☐063C4253.9003.11098163-112.6
84E84AV☐☐☐7514☐☐0GST05-2M☐☐☐063C4256.8751.11168760-112.5
90E84AV☐☐☐7514☐☐0GST05-3M☐☐☐063C4256.6671.31148560-112.5
84E84AV☐☐☐7514☐☐0GST06-2M☐☐☐063C4256.2502.01158660-112.5
90E84AV☐☐☐7514☐☐0GST05-3M☐☐☐063C4263.4671.11289654-9.52.2
90E84AV☐☐☐7514☐☐0GST06-3M☐☐☐063C4267.7602.613610250-8.92.1
90E84AV☐☐☐7514☐☐0GST06-3M☐☐☐063C4270.1562.414110649-8.62.0
90E84AV☐☐☐7514☐☐0GST05-3M☐☐☐063C4271.2381.114310748-8.42.0
90E84AV☐☐☐7514☐☐0GST06-3M☐☐☐063C4280.9522.016312242-7.41.8
90E84AV☐☐☐7514☐☐0GST06-3M☐☐☐063C4287.2672.017613139-6.91.6
90E84AV☐☐☐7514☐☐0GST06-3M☐☐☐063C4299.1671.620014934-6.11.4
90E84AV☐☐☐7514☐☐0GST06-3M☐☐☐063C42109.7071.622116531-5.51.3
90E84AV☐☐☐7514☐☐0GST07-3M☐☐☐063C42111.9153.022516930-5.41.3
90E84AV☐☐☐7514☐☐0GST06-3M☐☐☐063C42124.6671.325118827-4.81.1
90E84AV☐☐☐7514☐☐0GST07-3M☐☐☐063C42127.1762.725619227-4.71.1
90E84AV☐☐☐7514☐☐0GST06-3M☐☐☐063C42141.2891.328421324-4.31.0
90E84AV☐☐☐7514☐☐0GST07-3M☐☐☐063C42139.2112.428021024-4.31.0
90E84AV☐☐☐7514☐☐0GST07-3M☐☐☐063C42158.1942.131923822-3.80.9
90E84AV☐☐☐7514☐☐0GST06-3M☐☐☐063C42160.5561.032324221-3.70.9
90E84AV☐☐☐7514☐☐0GST06-3M☐☐☐063C42179.0671.036127019-3.40.8
90E84AV☐☐☐7514☐☐0GST07-3M☐☐☐063C42180.1561.936327119-3.30.8
90E84AV☐☐☐7514☐☐0GST09-3M☐☐☐063C42182.8442.936827519-3.30.8
90E84AV☐☐☐7514☐☐0GST07-3M☐☐☐063C42204.7221.741230817-2.90.7
V00-en_GB-12/20136.4 - 46
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 0.75 kW
n22/n2 = 1 ... 24.0
n1 = 141.7 ... 3400 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
90E84AV☐☐☐7514☐☐0GST09-3M☐☐☐063C42207.7782.941831316-2.90.7
90E84AV☐☐☐7514☐☐0GST07-3M☐☐☐063C42236.6221.447635614-2.50.6
90E84AV☐☐☐7514☐☐0GST07-3M☐☐☐063C42248.4581.450037414-2.40.6
90E84AV☐☐☐7514☐☐0GST09-3M☐☐☐063C42252.1672.550838014-2.40.6
90E84AV☐☐☐7514☐☐0GST09-3M☐☐☐063C42236.6222.947635614-2.50.6
90E84AV☐☐☐7514☐☐0GST07-3M☐☐☐063C42268.8891.354140513-2.20.5
90E84AV☐☐☐7514☐☐0GST09-3M☐☐☐063C42268.8892.954140513-2.20.5
90E84AV☐☐☐7514☐☐0GST07-3M☐☐☐063C42326.3331.065749110-1.80.4
90E84AV☐☐☐7514☐☐0GST09-3M☐☐☐063C42326.3332.465749110-1.80.4
90E84AV☐☐☐7514☐☐0GST09-3M☐☐☐063C42363.0002.07315479.4-1.70.4
90E84AV☐☐☐7514☐☐0GST07-3M☐☐☐063C42367.0330.97395539.3-1.60.4
90E84AV☐☐☐7514☐☐0GST09-3M☐☐☐063C42412.5001.98306218.2-1.50.3
6.4 - 47V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 1.10 kW
n22/n2 = 1 ... 24.0
n1 = 145.4 ... 3490 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
78E84AV☐☐☐1124☐☐0GST04-1M☐☐☐071C322.0482.86.04.71704-29371
78E84AV☐☐☐1124☐☐0GST04-1M☐☐☐071C322.2402.87.05.11558-26865
78E84AV☐☐☐1124☐☐0GST04-1M☐☐☐071C322.8572.29.06.51222-21051
78E84AV☐☐☐1124☐☐0GST04-1M☐☐☐071C323.5001.8108.0997-17142
78E84AV☐☐☐1124☐☐0GST04-1M☐☐☐071C324.4001.41310793-13633
78E84AV☐☐☐1124☐☐0GST05-1M☐☐☐071C324.5563.01410766-13232
84E84AV☐☐☐1124☐☐0GST04-2M☐☐☐071C325.1872.51512673-11628
78E84AV☐☐☐1124☐☐0GST04-1M☐☐☐071C325.6671.11713616-10626
78E84AV☐☐☐1124☐☐0GST05-1M☐☐☐071C325.6672.41713616-10626
78E84AV☐☐☐1124☐☐0GST06-1M☐☐☐071C325.6673.01713616-10626
84E84AV☐☐☐1124☐☐0GST04-2M☐☐☐071C325.8502.41713597-10325
84E84AV☐☐☐1124☐☐0GST04-2M☐☐☐071C326.4002.21914545-9423
78E84AV☐☐☐1124☐☐0GST05-1M☐☐☐071C327.3331.62217476-8220
78E84AV☐☐☐1124☐☐0GST06-1M☐☐☐071C327.3332.72217476-8220
84E84AV☐☐☐1124☐☐0GST05-2M☐☐☐071C328.1633.62418428-7418
78E84AV☐☐☐1124☐☐0GST05-1M☐☐☐071C328.9001.22620392-6716
78E84AV☐☐☐1124☐☐0GST06-1M☐☐☐071C328.9002.22620392-6716
84E84AV☐☐☐1124☐☐0GST04-2M☐☐☐071C329.0101.82620387-6716
84E84AV☐☐☐1124☐☐0GST04-2M☐☐☐071C329.8561.72922354-6115
84E84AV☐☐☐1124☐☐0GST05-2M☐☐☐071C3210.0003.22922349-6015
84E84AV☐☐☐1124☐☐0GST04-2M☐☐☐071C3211.2001.43325312-5413
84E84AV☐☐☐1124☐☐0GST05-2M☐☐☐071C3211.2002.93325312-5413
78E84AV☐☐☐1124☐☐0GST06-1M☐☐☐071C3211.2501.33326310-5313
84E84AV☐☐☐1124☐☐0GST04-2M☐☐☐071C3212.5711.43728278-4812
84E84AV☐☐☐1124☐☐0GST05-2M☐☐☐071C3213.0162.73829268-4611
84E84AV☐☐☐1124☐☐0GST04-2M☐☐☐071C3214.2861.14232244-4210
84E84AV☐☐☐1124☐☐0GST05-2M☐☐☐071C3214.3562.54232243-4210
84E84AV☐☐☐1124☐☐0GST04-2M☐☐☐071C3215.4001.34535227-399.4
84E84AV☐☐☐1124☐☐0GST05-2M☐☐☐071C3216.1902.74736216-379.0
84E84AV☐☐☐1124☐☐0GST04-2M☐☐☐071C3217.5001.05139199-348.3
84E84AV☐☐☐1124☐☐0GST05-2M☐☐☐071C3217.5002.45139199-348.3
84E84AV☐☐☐1124☐☐0GST04-2M☐☐☐071C3219.3601.15743180-317.5
84E84AV☐☐☐1124☐☐0GST05-2M☐☐☐071C3220.0442.35945174-307.3
84E84AV☐☐☐1124☐☐0GST05-2M☐☐☐071C3222.7781.96751153-266.4
84E84AV☐☐☐1124☐☐0GST05-2M☐☐☐071C3224.9331.97356140-245.8
84E84AV☐☐☐1124☐☐0GST05-2M☐☐☐071C3228.3331.58364123-215.1
84E84AV☐☐☐1124☐☐0GST05-2M☐☐☐071C3232.2671.59472108-194.5
84E84AV☐☐☐1124☐☐0GST06-2M☐☐☐071C3232.2673.19472108-194.5
90E84AV☐☐☐1124☐☐0GST05-3M☐☐☐071C3236.2671.11048096-174.0
84E84AV☐☐☐1124☐☐0GST05-2M☐☐☐071C3236.6671.21078295-164.0
84E84AV☐☐☐1124☐☐0GST06-2M☐☐☐071C3236.6672.61078295-164.0
V00-en_GB-12/20136.4 - 48
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 1.10 kW
n22/n2 = 1 ... 24.0
n1 = 145.4 ... 3490 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
84E84AV☐☐☐1124☐☐0GST05-2M☐☐☐071C3239.1601.21148889-153.7
90E84AV☐☐☐1124☐☐0GST06-3M☐☐☐071C3239.2002.41138789-153.7
84E84AV☐☐☐1124☐☐0GST06-2M☐☐☐071C3239.1602.51148889-153.7
90E84AV☐☐☐1124☐☐0GST06-3M☐☐☐071C3244.0002.51279779-143.3
84E84AV☐☐☐1124☐☐0GST05-2M☐☐☐071C3244.5001.113010078-143.3
84E84AV☐☐☐1124☐☐0GST06-2M☐☐☐071C3244.5002.413010078-143.3
90E84AV☐☐☐1124☐☐0GST05-3M☐☐☐071C3246.2591.013310275-133.1
84E84AV☐☐☐1124☐☐0GST06-2M☐☐☐071C3249.5001.614511171-122.9
90E84AV☐☐☐1124☐☐0GST06-3M☐☐☐071C3251.0222.114711368-122.9
90E84AV☐☐☐1124☐☐0GST06-3M☐☐☐071C3253.9002.115511965-112.7
90E84AV☐☐☐1124☐☐0GST05-3M☐☐☐071C3256.6670.916312562-112.6
84E84AV☐☐☐1124☐☐0GST06-2M☐☐☐071C3256.2501.616412662-112.6
90E84AV☐☐☐1124☐☐0GST06-3M☐☐☐071C3267.7601.819515052-8.92.2
90E84AV☐☐☐1124☐☐0GST06-3M☐☐☐071C3270.1561.720215550-8.62.1
90E84AV☐☐☐1124☐☐0GST07-3M☐☐☐071C3279.7622.922917644-7.51.8
90E84AV☐☐☐1124☐☐0GST06-3M☐☐☐071C3280.9521.423317943-7.41.8
90E84AV☐☐☐1124☐☐0GST07-3M☐☐☐071C3285.9832.724719041-7.01.7
90E84AV☐☐☐1124☐☐0GST06-3M☐☐☐071C3287.2671.425119340-6.91.7
90E84AV☐☐☐1124☐☐0GST07-3M☐☐☐071C3297.7082.428121636-6.11.5
90E84AV☐☐☐1124☐☐0GST06-3M☐☐☐071C3299.1671.128521935-6.11.5
90E84AV☐☐☐1124☐☐0GST06-3M☐☐☐071C32109.7071.131624232-5.51.3
90E84AV☐☐☐1124☐☐0GST07-3M☐☐☐071C32111.9152.132224731-5.41.3
90E84AV☐☐☐1124☐☐0GST07-3M☐☐☐071C32127.1761.836628127-4.71.1
90E84AV☐☐☐1124☐☐0GST07-3M☐☐☐071C32139.2111.740030825-4.31.0
90E84AV☐☐☐1124☐☐0GST07-3M☐☐☐071C32158.1941.545534922-3.80.9
90E84AV☐☐☐1124☐☐0GST07-3M☐☐☐071C32180.1561.351839819-3.30.8
90E84AV☐☐☐1124☐☐0GST09-3M☐☐☐071C32182.8442.952640419-3.30.8
90E84AV☐☐☐1124☐☐0GST07-3M☐☐☐071C32204.7221.158945217-2.90.7
90E84AV☐☐☐1124☐☐0GST09-3M☐☐☐071C32207.7782.659845917-2.90.7
90E84AV☐☐☐1124☐☐0GST07-3M☐☐☐071C32236.6221.068152315-2.50.6
90E84AV☐☐☐1124☐☐0GST09-3M☐☐☐071C32236.6222.368152315-2.50.6
90E84AV☐☐☐1124☐☐0GST07-3M☐☐☐071C32248.4580.971554914-2.40.6
90E84AV☐☐☐1124☐☐0GST09-3M☐☐☐071C32252.1672.172555714-2.40.6
90E84AV☐☐☐1124☐☐0GST09-3M☐☐☐071C32268.8892.077359413-2.20.5
90E84AV☐☐☐1124☐☐0GST09-3M☐☐☐071C32326.3331.693972111-1.80.5
90E84AV☐☐☐1124☐☐0GST09-3M☐☐☐071C32363.0001.510448029.6-1.70.4
90E84AV☐☐☐1124☐☐0GST09-3M☐☐☐071C32412.5001.311879118.5-1.50.4
6.4 - 49V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 1.50 kW
n22/n2 = 1 ... 24.0
n1 = 143.8 ... 3450 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
78E84AV☐☐☐1524☐☐0GST04-1M☐☐☐071C422.0482.18.06.41685-29370
78E84AV☐☐☐1524☐☐0GST05-1M☐☐☐071C422.0483.18.06.41685-29370
78E84AV☐☐☐1524☐☐0GST04-1M☐☐☐071C422.2402.09.07.01540-26864
78E84AV☐☐☐1524☐☐0GST05-1M☐☐☐071C422.2403.19.07.01540-26864
78E84AV☐☐☐1524☐☐0GST04-1M☐☐☐071C422.8571.6128.91208-21050
78E84AV☐☐☐1524☐☐0GST05-1M☐☐☐071C422.8572.9128.91208-21050
78E84AV☐☐☐1524☐☐0GST06-1M☐☐☐071C422.8573.1128.91208-21050
78E84AV☐☐☐1524☐☐0GST04-1M☐☐☐071C423.5001.31411986-17141
78E84AV☐☐☐1524☐☐0GST05-1M☐☐☐071C423.5002.61411986-17141
78E84AV☐☐☐1524☐☐0GST04-1M☐☐☐071C424.4001.11814784-13633
78E84AV☐☐☐1524☐☐0GST05-1M☐☐☐071C424.5562.21914757-13232
78E84AV☐☐☐1524☐☐0GST06-1M☐☐☐071C424.5562.61914757-13232
84E84AV☐☐☐1524☐☐0GST04-2M☐☐☐071C425.1871.82116665-11628
84E84AV☐☐☐1524☐☐0GST05-2M☐☐☐071C425.1873.12116665-11628
78E84AV☐☐☐1524☐☐0GST05-1M☐☐☐071C425.6671.82318609-10625
78E84AV☐☐☐1524☐☐0GST06-1M☐☐☐071C425.6672.22318609-10625
84E84AV☐☐☐1524☐☐0GST04-2M☐☐☐071C425.8501.72418590-10325
84E84AV☐☐☐1524☐☐0GST05-2M☐☐☐071C425.8503.12418590-10325
84E84AV☐☐☐1524☐☐0GST04-2M☐☐☐071C426.4001.62620539-9423
84E84AV☐☐☐1524☐☐0GST05-2M☐☐☐071C426.4003.12620539-9423
84E84AV☐☐☐1524☐☐0GST05-2M☐☐☐071C427.2382.82922477-8320
78E84AV☐☐☐1524☐☐0GST05-1M☐☐☐071C427.3331.23023471-8220
78E84AV☐☐☐1524☐☐0GST06-1M☐☐☐071C427.3332.03023471-8220
84E84AV☐☐☐1524☐☐0GST05-2M☐☐☐071C428.1632.73325423-7418
84E84AV☐☐☐1524☐☐0GST06-2M☐☐☐071C428.1633.13325423-7418
78E84AV☐☐☐1524☐☐0GST06-1M☐☐☐071C428.9001.63628388-6716
84E84AV☐☐☐1524☐☐0GST04-2M☐☐☐071C429.0101.33628383-6716
84E84AV☐☐☐1524☐☐0GST05-2M☐☐☐071C429.0102.53628383-6716
84E84AV☐☐☐1524☐☐0GST04-2M☐☐☐071C429.8561.24030350-6115
84E84AV☐☐☐1524☐☐0GST05-2M☐☐☐071C4210.0002.34031345-6014
84E84AV☐☐☐1524☐☐0GST04-2M☐☐☐071C4211.2001.04534308-5413
84E84AV☐☐☐1524☐☐0GST05-2M☐☐☐071C4211.2002.14534308-5413
78E84AV☐☐☐1524☐☐0GST06-1M☐☐☐071C4211.2500.94635307-5313
84E84AV☐☐☐1524☐☐0GST04-2M☐☐☐071C4212.5711.05138274-4811
84E84AV☐☐☐1524☐☐0GST06-2M☐☐☐071C4212.5713.15138274-4811
84E84AV☐☐☐1524☐☐0GST05-2M☐☐☐071C4213.0162.05240265-4611
84E84AV☐☐☐1524☐☐0GST06-2M☐☐☐071C4214.2863.15844242-4210
84E84AV☐☐☐1524☐☐0GST05-2M☐☐☐071C4214.3561.85844240-4210
84E84AV☐☐☐1524☐☐0GST04-2M☐☐☐071C4215.4001.06247224-399.3
84E84AV☐☐☐1524☐☐0GST05-2M☐☐☐071C4216.1902.06550213-378.9
84E84AV☐☐☐1524☐☐0GST05-2M☐☐☐071C4217.5001.77154197-348.2
V00-en_GB-12/20136.4 - 50
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 1.50 kW
n22/n2 = 1 ... 24.0
n1 = 143.8 ... 3450 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
84E84AV☐☐☐1524☐☐0GST05-2M☐☐☐071C4220.0441.78161172-307.2
84E84AV☐☐☐1524☐☐0GST06-2M☐☐☐071C4220.0442.98161172-307.2
84E84AV☐☐☐1524☐☐0GST05-2M☐☐☐071C4222.7781.49270152-266.3
84E84AV☐☐☐1524☐☐0GST06-2M☐☐☐071C4222.7782.99270152-266.3
84E84AV☐☐☐1524☐☐0GST05-2M☐☐☐071C4224.9331.410076138-245.8
84E84AV☐☐☐1524☐☐0GST06-2M☐☐☐071C4224.9332.410076138-245.8
84E84AV☐☐☐1524☐☐0GST05-2M☐☐☐071C4228.3331.111487122-215.1
84E84AV☐☐☐1524☐☐0GST06-2M☐☐☐071C4228.3332.411487122-215.1
84E84AV☐☐☐1524☐☐0GST05-2M☐☐☐071C4232.2671.113099107-194.5
84E84AV☐☐☐1524☐☐0GST06-2M☐☐☐071C4232.2672.213099107-194.5
84E84AV☐☐☐1524☐☐0GST06-2M☐☐☐071C4236.6671.914811294-163.9
84E84AV☐☐☐1524☐☐0GST05-2M☐☐☐071C4239.1600.915812088-153.7
84E84AV☐☐☐1524☐☐0GST06-2M☐☐☐071C4239.1601.815812088-153.7
90E84AV☐☐☐1524☐☐0GST06-3M☐☐☐071C4239.2001.815611888-153.7
84E84AV☐☐☐1524☐☐0GST06-2M☐☐☐071C4244.5001.717913678-143.2
90E84AV☐☐☐1524☐☐0GST06-3M☐☐☐071C4244.0001.817513378-143.3
90E84AV☐☐☐1524☐☐0GST07-3M☐☐☐071C4244.0003.217513378-143.3
84E84AV☐☐☐1524☐☐0GST06-2M☐☐☐071C4249.5001.219915170-122.9
90E84AV☐☐☐1524☐☐0GST06-3M☐☐☐071C4251.0221.520215468-122.8
90E84AV☐☐☐1524☐☐0GST06-3M☐☐☐071C4253.9001.621416264-112.7
90E84AV☐☐☐1524☐☐0GST07-3M☐☐☐071C4253.9003.221416264-112.7
84E84AV☐☐☐1524☐☐0GST06-2M☐☐☐071C4256.2501.222717261-112.6
90E84AV☐☐☐1524☐☐0GST07-3M☐☐☐071C4265.0792.625819653-9.22.2
90E84AV☐☐☐1524☐☐0GST06-3M☐☐☐071C4267.7601.326920451-8.92.1
90E84AV☐☐☐1524☐☐0GST06-3M☐☐☐071C4270.1561.227821149-8.62.1
90E84AV☐☐☐1524☐☐0GST07-3M☐☐☐071C4270.1562.427821149-8.62.1
90E84AV☐☐☐1524☐☐0GST06-3M☐☐☐071C4280.9521.032124443-7.41.8
90E84AV☐☐☐1524☐☐0GST07-3M☐☐☐071C4279.7622.131724043-7.51.8
90E84AV☐☐☐1524☐☐0GST06-3M☐☐☐071C4287.2671.034626340-6.91.7
90E84AV☐☐☐1524☐☐0GST07-3M☐☐☐071C4285.9832.034125940-7.01.7
90E84AV☐☐☐1524☐☐0GST09-3M☐☐☐071C4293.5413.237128237-6.41.5
90E84AV☐☐☐1524☐☐0GST07-3M☐☐☐071C4297.7081.738829435-6.11.5
90E84AV☐☐☐1524☐☐0GST07-3M☐☐☐071C42111.9151.544433731-5.41.3
90E84AV☐☐☐1524☐☐0GST09-3M☐☐☐071C42113.5853.245134230-5.31.3
90E84AV☐☐☐1524☐☐0GST07-3M☐☐☐071C42127.1761.350538327-4.71.1
90E84AV☐☐☐1524☐☐0GST09-3M☐☐☐071C42129.0743.051238927-4.71.1
90E84AV☐☐☐1524☐☐0GST07-3M☐☐☐071C42139.2111.255241925-4.31.0
90E84AV☐☐☐1524☐☐0GST09-3M☐☐☐071C42141.2892.756142624-4.31.0
90E84AV☐☐☐1524☐☐0GST07-3M☐☐☐071C42158.1941.162847622-3.80.9
90E84AV☐☐☐1524☐☐0GST09-3M☐☐☐071C42160.5562.463748422-3.70.9
90E84AV☐☐☐1524☐☐0GST07-3M☐☐☐071C42180.1560.971554319-3.30.8
6.4 - 51V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 1.50 kW
n22/n2 = 1 ... 24.0
n1 = 143.8 ... 3450 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
90E84AV☐☐☐1524☐☐0GST09-3M☐☐☐071C42182.8442.172655119-3.30.8
90E84AV☐☐☐1524☐☐0GST09-3M☐☐☐071C42207.7781.982462617-2.90.7
90E84AV☐☐☐1524☐☐0GST09-3M☐☐☐071C42236.6221.693971315-2.50.6
90E84AV☐☐☐1524☐☐0GST09-3M☐☐☐071C42252.1671.5100176014-2.40.6
90E84AV☐☐☐1524☐☐0GST09-3M☐☐☐071C42268.8891.5106781013-2.20.5
90E84AV☐☐☐1524☐☐0GST09-3M☐☐☐071C42326.3331.2129598311-1.80.4
90E84AV☐☐☐1524☐☐0GST09-3M☐☐☐071C42363.0001.1144010939.5-1.70.4
90E84AV☐☐☐1524☐☐0GST09-3M☐☐☐071C42412.5000.9163712428.4-1.50.4
V00-en_GB-12/20136.4 - 52
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 2.20 kW
n22/n2 = 1 ... 24.0
n1 = 145.8 ... 3500 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
78E84AV☐☐☐2224☐☐0GST04-1M☐☐☐080C322.0481.4129.11709-29371
78E84AV☐☐☐2224☐☐0GST04-1M☐☐☐080C322.2401.4139.91563-26865
78E84AV☐☐☐2224☐☐0GST05-1M☐☐☐080C322.2403.0139.91563-26865
78E84AV☐☐☐2224☐☐0GST04-1M☐☐☐080C322.8571.117131225-21051
78E84AV☐☐☐2224☐☐0GST05-1M☐☐☐080C322.8572.417131225-21051
78E84AV☐☐☐2224☐☐0GST04-1M☐☐☐080C323.5000.921161000-17142
78E84AV☐☐☐2224☐☐0GST05-1M☐☐☐080C323.5002.021161000-17142
78E84AV☐☐☐2224☐☐0GST05-1M☐☐☐080C324.5561.52720768-13232
78E84AV☐☐☐2224☐☐0GST06-1M☐☐☐080C324.5562.92720768-13232
84E84AV☐☐☐2224☐☐0GST04-2M☐☐☐080C325.1871.23023675-11628
84E84AV☐☐☐2224☐☐0GST05-2M☐☐☐080C325.1872.23023675-11628
78E84AV☐☐☐2224☐☐0GST07-1M☐☐☐080C325.5832.93325627-10826
78E84AV☐☐☐2224☐☐0GST05-1M☐☐☐080C325.6671.23425618-10626
78E84AV☐☐☐2224☐☐0GST06-1M☐☐☐080C325.6672.43425618-10626
84E84AV☐☐☐2224☐☐0GST04-2M☐☐☐080C325.8501.23426598-10325
84E84AV☐☐☐2224☐☐0GST05-2M☐☐☐080C325.8502.23426598-10325
84E84AV☐☐☐2224☐☐0GST04-2M☐☐☐080C326.4001.13728547-9423
84E84AV☐☐☐2224☐☐0GST05-2M☐☐☐080C326.4002.13728547-9423
84E84AV☐☐☐2224☐☐0GST05-2M☐☐☐080C327.2381.94232484-8320
78E84AV☐☐☐2224☐☐0GST06-1M☐☐☐080C327.3331.74333477-8220
78E84AV☐☐☐2224☐☐0GST07-1M☐☐☐080C327.3332.74333477-8220
84E84AV☐☐☐2224☐☐0GST05-2M☐☐☐080C328.1631.84836429-7418
78E84AV☐☐☐2224☐☐0GST06-1M☐☐☐080C328.9001.25339393-6716
78E84AV☐☐☐2224☐☐0GST07-1M☐☐☐080C328.9002.25339393-6716
84E84AV☐☐☐2224☐☐0GST04-2M☐☐☐080C329.0100.95339389-6716
84E84AV☐☐☐2224☐☐0GST05-2M☐☐☐080C329.0101.75339389-6716
84E84AV☐☐☐2224☐☐0GST05-2M☐☐☐080C3210.0001.65844350-6015
84E84AV☐☐☐2224☐☐0GST05-2M☐☐☐080C3211.2001.56549313-5413
84E84AV☐☐☐2224☐☐0GST06-2M☐☐☐080C3211.2003.26549313-5413
78E84AV☐☐☐2224☐☐0GST07-1M☐☐☐080C3211.2501.36750311-5313
84E84AV☐☐☐2224☐☐0GST06-2M☐☐☐080C3212.5713.07355278-4812
84E84AV☐☐☐2224☐☐0GST05-2M☐☐☐080C3213.0161.47657269-4611
84E84AV☐☐☐2224☐☐0GST06-2M☐☐☐080C3214.2862.88362245-4210
84E84AV☐☐☐2224☐☐0GST05-2M☐☐☐080C3214.3561.38463244-4210
84E84AV☐☐☐2224☐☐0GST06-2M☐☐☐080C3215.4003.09067227-399.5
84E84AV☐☐☐2224☐☐0GST05-2M☐☐☐080C3216.1901.39471216-379.0
84E84AV☐☐☐2224☐☐0GST05-2M☐☐☐080C3217.5001.210276200-348.3
84E84AV☐☐☐2224☐☐0GST06-2M☐☐☐080C3217.5002.610276200-348.3
84E84AV☐☐☐2224☐☐0GST05-2M☐☐☐080C3220.0441.211788175-307.3
84E84AV☐☐☐2224☐☐0GST06-2M☐☐☐080C3220.0442.611788175-307.3
84E84AV☐☐☐2224☐☐0GST05-2M☐☐☐080C3222.7780.913399154-266.4
6.4 - 53V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 2.20 kW
n22/n2 = 1 ... 24.0
n1 = 145.8 ... 3500 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
84E84AV☐☐☐2224☐☐0GST06-2M☐☐☐080C3222.7782.013399154-266.4
84E84AV☐☐☐2224☐☐0GST05-2M☐☐☐080C3224.9331.0145109140-245.9
84E84AV☐☐☐2224☐☐0GST06-2M☐☐☐080C3224.9332.1145109140-245.9
84E84AV☐☐☐2224☐☐0GST06-2M☐☐☐080C3228.3331.6165124124-215.2
84E84AV☐☐☐2224☐☐0GST06-2M☐☐☐080C3232.2671.7188141109-194.5
84E84AV☐☐☐2224☐☐0GST07-2M☐☐☐080C3232.2673.1188141109-194.5
84E84AV☐☐☐2224☐☐0GST06-2M☐☐☐080C3236.6671.321416096-164.0
84E84AV☐☐☐2224☐☐0GST07-2M☐☐☐080C3236.6672.821416096-164.0
90E84AV☐☐☐2224☐☐0GST06-3M☐☐☐080C3239.2001.222516989-153.7
84E84AV☐☐☐2224☐☐0GST06-2M☐☐☐080C3239.1601.422817189-153.7
84E84AV☐☐☐2224☐☐0GST07-2M☐☐☐080C3239.1602.422817189-153.7
90E84AV☐☐☐2224☐☐0GST07-3M☐☐☐080C3239.2002.622516989-153.7
90E84AV☐☐☐2224☐☐0GST06-3M☐☐☐080C3244.0001.325218980-143.3
90E84AV☐☐☐2224☐☐0GST07-3M☐☐☐080C3244.0002.725218980-143.3
84E84AV☐☐☐2224☐☐0GST06-2M☐☐☐080C3244.5001.225919479-143.3
84E84AV☐☐☐2224☐☐0GST07-2M☐☐☐080C3244.5002.625919479-143.3
84E84AV☐☐☐2224☐☐0GST07-2M☐☐☐080C3249.5001.628821671-123.0
90E84AV☐☐☐2224☐☐0GST06-3M☐☐☐080C3251.0221.129321969-122.9
90E84AV☐☐☐2224☐☐0GST07-3M☐☐☐080C3251.0222.329321969-122.9
90E84AV☐☐☐2224☐☐0GST06-3M☐☐☐080C3253.9001.130923265-112.7
90E84AV☐☐☐2224☐☐0GST07-3M☐☐☐080C3253.9002.230923265-112.7
84E84AV☐☐☐2224☐☐0GST07-2M☐☐☐080C3256.2501.632824662-112.6
90E84AV☐☐☐2224☐☐0GST07-3M☐☐☐080C3265.0791.837328054-9.22.2
90E84AV☐☐☐2224☐☐0GST07-3M☐☐☐080C3270.1561.740330250-8.62.1
90E84AV☐☐☐2224☐☐0GST07-3M☐☐☐080C3279.7621.545834344-7.51.8
90E84AV☐☐☐2224☐☐0GST09-3M☐☐☐080C3281.6673.246935143-7.41.8
90E84AV☐☐☐2224☐☐0GST07-3M☐☐☐080C3285.9831.449337041-7.01.7
90E84AV☐☐☐2224☐☐0GST09-3M☐☐☐080C3293.5412.953740237-6.41.6
90E84AV☐☐☐2224☐☐0GST07-3M☐☐☐080C3297.7081.256142036-6.11.5
90E84AV☐☐☐2224☐☐0GST09-3M☐☐☐080C3299.1672.756942735-6.11.5
90E84AV☐☐☐2224☐☐0GST07-3M☐☐☐080C32111.9151.064248131-5.41.3
90E84AV☐☐☐2224☐☐0GST09-3M☐☐☐080C32113.5852.465248931-5.31.3
90E84AV☐☐☐2224☐☐0GST07-3M☐☐☐080C32127.1760.973054728-4.71.2
90E84AV☐☐☐2224☐☐0GST09-3M☐☐☐080C32129.0742.174155527-4.71.1
90E84AV☐☐☐2224☐☐0GST09-3M☐☐☐080C32141.2891.981160825-4.31.0
90E84AV☐☐☐2224☐☐0GST11-3M☐☐☐080C32146.9933.084363224-4.11.0
90E84AV☐☐☐2224☐☐0GST09-3M☐☐☐080C32160.5561.792169122-3.70.9
90E84AV☐☐☐2224☐☐0GST11-3M☐☐☐080C32158.1942.990868022-3.80.9
90E84AV☐☐☐2224☐☐0GST09-3M☐☐☐080C32182.8441.5104978619-3.30.8
90E84AV☐☐☐2224☐☐0GST11-3M☐☐☐080C32180.1562.5103477519-3.30.8
90E84AV☐☐☐2224☐☐0GST09-3M☐☐☐080C32207.7781.3119289417-2.90.7
V00-en_GB-12/20136.4 - 54
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 2.20 kW
n22/n2 = 1 ... 24.0
n1 = 145.8 ... 3500 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
90E84AV☐☐☐2224☐☐0GST11-3M☐☐☐080C32207.7782.2119289417-2.90.7
90E84AV☐☐☐2224☐☐0GST09-3M☐☐☐080C32236.6221.11357101815-2.50.6
90E84AV☐☐☐2224☐☐0GST11-3M☐☐☐080C32236.6221.91357101815-2.50.6
90E84AV☐☐☐2224☐☐0GST09-3M☐☐☐080C32252.1671.11447108414-2.40.6
90E84AV☐☐☐2224☐☐0GST11-3M☐☐☐080C32252.1671.81447108414-2.40.6
90E84AV☐☐☐2224☐☐0GST09-3M☐☐☐080C32268.8891.01543115613-2.20.5
90E84AV☐☐☐2224☐☐0GST11-3M☐☐☐080C32268.8891.81543115613-2.20.5
90E84AV☐☐☐2224☐☐0GST11-3M☐☐☐080C32326.3331.41872140311-1.80.5
90E84AV☐☐☐2224☐☐0GST11-3M☐☐☐080C32363.0001.2208215619.6-1.70.4
90E84AV☐☐☐2224☐☐0GST11-3M☐☐☐080C32412.5001.1236617748.5-1.50.4
6.4 - 55V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 3.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
78E84AV☐☐☐3024☐☐0GST04-1M☐☐☐080C422.0481.017131700-44071
78E84AV☐☐☐3024☐☐0GST05-1M☐☐☐080C422.0482.417131700-44071
78E84AV☐☐☐3024☐☐0GST06-1M☐☐☐080C422.0483.117131700-44071
78E84AV☐☐☐3024☐☐0GST04-1M☐☐☐080C422.2401.018141554-40265
78E84AV☐☐☐3024☐☐0GST05-1M☐☐☐080C422.2402.218141554-40265
78E84AV☐☐☐3024☐☐0GST06-1M☐☐☐080C422.2403.118141554-40265
78E84AV☐☐☐3024☐☐0GST05-1M☐☐☐080C422.8571.723171218-31551
78E84AV☐☐☐3024☐☐0GST06-1M☐☐☐080C422.8572.923171218-31551
78E84AV☐☐☐3024☐☐0GST07-1M☐☐☐080C422.8573.123171218-31551
78E84AV☐☐☐3024☐☐0GST05-1M☐☐☐080C423.5001.42821994-25741
78E84AV☐☐☐3024☐☐0GST06-1M☐☐☐080C423.5002.62821994-25741
78E84AV☐☐☐3024☐☐0GST05-1M☐☐☐080C424.5561.13728764-19832
78E84AV☐☐☐3024☐☐0GST06-1M☐☐☐080C424.5562.13728764-19832
78E84AV☐☐☐3024☐☐0GST07-1M☐☐☐080C424.5562.63728764-19832
84E84AV☐☐☐3024☐☐0GST04-2M☐☐☐080C425.1870.94131671-17428
84E84AV☐☐☐3024☐☐0GST05-2M☐☐☐080C425.1871.64131671-17428
84E84AV☐☐☐3024☐☐0GST06-2M☐☐☐080C425.3243.14332654-16927
78E84AV☐☐☐3024☐☐0GST07-1M☐☐☐080C425.5832.14534623-16126
78E84AV☐☐☐3024☐☐0GST06-1M☐☐☐080C425.6671.74635614-15926
84E84AV☐☐☐3024☐☐0GST05-2M☐☐☐080C425.8501.64735595-15425
84E84AV☐☐☐3024☐☐0GST06-2M☐☐☐080C425.8503.14735595-15425
84E84AV☐☐☐3024☐☐0GST05-2M☐☐☐080C426.4001.55138544-14123
84E84AV☐☐☐3024☐☐0GST06-2M☐☐☐080C426.4003.15138544-14123
84E84AV☐☐☐3024☐☐0GST05-2M☐☐☐080C427.2381.45843481-12420
78E84AV☐☐☐3024☐☐0GST06-1M☐☐☐080C427.3331.36045475-12320
78E84AV☐☐☐3024☐☐0GST07-1M☐☐☐080C427.3332.06045475-12320
84E84AV☐☐☐3024☐☐0GST05-2M☐☐☐080C428.1631.36549426-11018
84E84AV☐☐☐3024☐☐0GST06-2M☐☐☐080C428.1632.96549426-11018
78E84AV☐☐☐3024☐☐0GST07-1M☐☐☐080C428.9001.67254391-10116
84E84AV☐☐☐3024☐☐0GST05-2M☐☐☐080C429.0101.27254386-10016
84E84AV☐☐☐3024☐☐0GST06-2M☐☐☐080C429.0102.77254386-10016
84E84AV☐☐☐3024☐☐0GST05-2M☐☐☐080C4210.0001.28060348-9015
84E84AV☐☐☐3024☐☐0GST06-2M☐☐☐080C4210.0002.58060348-9015
84E84AV☐☐☐3024☐☐0GST05-2M☐☐☐080C4211.2001.19067311-8013
84E84AV☐☐☐3024☐☐0GST06-2M☐☐☐080C4211.2002.49067311-8013
78E84AV☐☐☐3024☐☐0GST07-1M☐☐☐080C4211.2500.99168309-8013
84E84AV☐☐☐3024☐☐0GST06-2M☐☐☐080C4212.5712.210075277-7212
84E84AV☐☐☐3024☐☐0GST07-2M☐☐☐080C4212.5713.110075277-7212
84E84AV☐☐☐3024☐☐0GST05-2M☐☐☐080C4213.0161.010478267-6911
84E84AV☐☐☐3024☐☐0GST06-2M☐☐☐080C4214.2862.011486244-6310
84E84AV☐☐☐3024☐☐0GST07-2M☐☐☐080C4214.2863.111486244-6310
V00-en_GB-12/20136.4 - 56
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 3.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
84E84AV☐☐☐3024☐☐0GST05-2M☐☐☐080C4214.3560.911586242-6310
84E84AV☐☐☐3024☐☐0GST06-2M☐☐☐080C4215.4002.212392226-589.4
84E84AV☐☐☐3024☐☐0GST05-2M☐☐☐080C4216.1901.012997215-569.0
84E84AV☐☐☐3024☐☐0GST06-2M☐☐☐080C4217.5001.9140105199-518.3
84E84AV☐☐☐3024☐☐0GST06-2M☐☐☐080C4220.0441.9160120174-457.2
84E84AV☐☐☐3024☐☐0GST07-2M☐☐☐080C4220.0442.9160120174-457.2
84E84AV☐☐☐3024☐☐0GST06-2M☐☐☐080C4222.7781.5182137153-406.4
84E84AV☐☐☐3024☐☐0GST07-2M☐☐☐080C4222.7782.9182137153-406.4
84E84AV☐☐☐3024☐☐0GST07-2M☐☐☐080C4224.5672.4196147142-375.9
84E84AV☐☐☐3024☐☐0GST06-2M☐☐☐080C4224.9331.6199149140-365.8
84E84AV☐☐☐3024☐☐0GST07-2M☐☐☐080C4227.9172.4223167125-325.2
84E84AV☐☐☐3024☐☐0GST06-2M☐☐☐080C4228.3331.2226170123-325.1
84E84AV☐☐☐3024☐☐0GST06-2M☐☐☐080C4232.2671.2258193108-284.5
84E84AV☐☐☐3024☐☐0GST07-2M☐☐☐080C4232.2672.3258193108-284.5
84E84AV☐☐☐3024☐☐0GST06-2M☐☐☐080C4236.6670.929322095-254.0
84E84AV☐☐☐3024☐☐0GST07-2M☐☐☐080C4236.6672.129322095-254.0
84E84AV☐☐☐3024☐☐0GST06-2M☐☐☐080C4239.1601.031323589-233.7
84E84AV☐☐☐3024☐☐0GST07-2M☐☐☐080C4239.1601.831323589-233.7
90E84AV☐☐☐3024☐☐0GST07-3M☐☐☐080C4239.2001.930823189-233.7
90E84AV☐☐☐3024☐☐0GST06-3M☐☐☐080C4244.0000.934626079-213.3
90E84AV☐☐☐3024☐☐0GST07-3M☐☐☐080C4244.0001.934626079-213.3
84E84AV☐☐☐3024☐☐0GST07-2M☐☐☐080C4244.5001.935526778-203.3
84E84AV☐☐☐3024☐☐0GST07-2M☐☐☐080C4249.5001.239529770-182.9
90E84AV☐☐☐3024☐☐0GST07-3M☐☐☐080C4251.0221.740130168-182.8
90E84AV☐☐☐3024☐☐0GST09-3M☐☐☐080C4253.0443.141731366-172.7
90E84AV☐☐☐3024☐☐0GST07-3M☐☐☐080C4253.9001.642431865-172.7
84E84AV☐☐☐3024☐☐0GST07-2M☐☐☐080C4256.2501.244933762-162.6
90E84AV☐☐☐3024☐☐0GST09-3M☐☐☐080C4260.2783.147435658-152.4
90E84AV☐☐☐3024☐☐0GST07-3M☐☐☐080C4265.0791.351238454-142.2
90E84AV☐☐☐3024☐☐0GST07-3M☐☐☐080C4270.1561.255241450-132.1
90E84AV☐☐☐3024☐☐0GST09-3M☐☐☐080C4271.8672.556542448-132.0
90E84AV☐☐☐3024☐☐0GST07-3M☐☐☐080C4279.7621.162847144-111.8
90E84AV☐☐☐3024☐☐0GST09-3M☐☐☐080C4281.6672.364348243-111.8
90E84AV☐☐☐3024☐☐0GST07-3M☐☐☐080C4285.9831.067750741-111.7
90E84AV☐☐☐3024☐☐0GST09-3M☐☐☐080C4293.5412.173655237-9.61.6
90E84AV☐☐☐3024☐☐0GST09-3M☐☐☐080C4299.1671.978058535-9.11.5
90E84AV☐☐☐3024☐☐0GST09-3M☐☐☐080C42113.5851.789467031-7.91.3
90E84AV☐☐☐3024☐☐0GST09-3M☐☐☐080C42129.0741.5101676227-7.01.1
90E84AV☐☐☐3024☐☐0GST11-3M☐☐☐080C42129.0742.6101676227-7.01.1
90E84AV☐☐☐3024☐☐0GST09-3M☐☐☐080C42141.2891.4111283425-6.41.0
90E84AV☐☐☐3024☐☐0GST11-3M☐☐☐080C42146.9932.2115786724-6.11.0
6.4 - 57V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 3.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
90E84AV☐☐☐3024☐☐0GST09-3M☐☐☐080C42160.5561.2126394722-5.60.9
90E84AV☐☐☐3024☐☐0GST11-3M☐☐☐080C42158.1942.1124593422-5.70.9
90E84AV☐☐☐3024☐☐0GST09-3M☐☐☐080C42182.8441.11439107919-4.90.8
90E84AV☐☐☐3024☐☐0GST11-3M☐☐☐080C42180.1561.81417106319-5.00.8
90E84AV☐☐☐3024☐☐0GST09-3M☐☐☐080C42207.7780.91635122617-4.30.7
90E84AV☐☐☐3024☐☐0GST11-3M☐☐☐080C42207.7781.61635122617-4.30.7
90E84AV☐☐☐3024☐☐0GST11-3M☐☐☐080C42236.6221.41862139615-3.80.6
90E84AV☐☐☐3024☐☐0GST11-3M☐☐☐080C42252.1671.31984148814-3.60.6
90E84AV☐☐☐3024☐☐0GST11-3M☐☐☐080C42268.8891.32116158713-3.40.5
90E84AV☐☐☐3024☐☐0GST11-3M☐☐☐080C42326.3331.12568192611-2.80.4
V00-en_GB-12/20136.4 - 58
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 4.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
78E84AV☐☐☐4024☐☐0GST05-1M☐☐☐090C322.0481.822161700-29371
78E84AV☐☐☐4024☐☐0GST06-1M☐☐☐090C322.0482.522161700-29371
78E84AV☐☐☐4024☐☐0GST05-1M☐☐☐090C322.2401.724171554-26865
78E84AV☐☐☐4024☐☐0GST06-1M☐☐☐090C322.2402.424171554-26865
78E84AV☐☐☐4024☐☐0GST05-1M☐☐☐090C322.8571.331221218-21051
78E84AV☐☐☐4024☐☐0GST06-1M☐☐☐090C322.8572.331221218-21051
78E84AV☐☐☐4024☐☐0GST07-1M☐☐☐090C322.8572.931221218-21051
78E84AV☐☐☐4024☐☐0GST05-1M☐☐☐090C323.5001.13827994-17141
78E84AV☐☐☐4024☐☐0GST06-1M☐☐☐090C323.5002.13827994-17141
78E84AV☐☐☐4024☐☐0GST06-1M☐☐☐090C324.5561.64935764-13232
78E84AV☐☐☐4024☐☐0GST07-1M☐☐☐090C324.5562.44935764-13232
84E84AV☐☐☐4024☐☐0GST05-2M☐☐☐090C325.1871.25539671-11628
84E84AV☐☐☐4024☐☐0GST06-2M☐☐☐090C325.3242.85740654-11327
78E84AV☐☐☐4024☐☐0GST07-1M☐☐☐090C325.5832.06042623-10826
78E84AV☐☐☐4024☐☐0GST06-1M☐☐☐090C325.6671.36143614-10626
84E84AV☐☐☐4024☐☐0GST05-2M☐☐☐090C325.8501.26244595-10325
84E84AV☐☐☐4024☐☐0GST06-2M☐☐☐090C325.8502.76244595-10325
84E84AV☐☐☐4024☐☐0GST05-2M☐☐☐090C326.4001.26848544-9423
84E84AV☐☐☐4024☐☐0GST06-2M☐☐☐090C326.4002.56848544-9423
84E84AV☐☐☐4024☐☐0GST05-2M☐☐☐090C327.2381.17754481-8320
78E84AV☐☐☐4024☐☐0GST06-1M☐☐☐090C327.3331.07956475-8220
78E84AV☐☐☐4024☐☐0GST07-1M☐☐☐090C327.3331.77956475-8220
78E84AV☐☐☐4024☐☐0GST09-1M☐☐☐090C327.3332.07956475-8220
84E84AV☐☐☐4024☐☐0GST05-2M☐☐☐090C328.1631.08761426-7418
84E84AV☐☐☐4024☐☐0GST06-2M☐☐☐090C328.1632.28761426-7418
78E84AV☐☐☐4024☐☐0GST07-1M☐☐☐090C328.9001.49667391-6716
78E84AV☐☐☐4024☐☐0GST09-1M☐☐☐090C328.9001.89667391-6716
84E84AV☐☐☐4024☐☐0GST05-2M☐☐☐090C329.0100.99667386-6716
84E84AV☐☐☐4024☐☐0GST06-2M☐☐☐090C329.0102.19667386-6716
84E84AV☐☐☐4024☐☐0GST06-2M☐☐☐090C3210.0001.910775348-6015
84E84AV☐☐☐4024☐☐0GST06-2M☐☐☐090C3211.2001.811984311-5413
78E84AV☐☐☐4024☐☐0GST09-1M☐☐☐090C3211.2501.412285309-5313
84E84AV☐☐☐4024☐☐0GST06-2M☐☐☐090C3212.5711.713494277-4812
84E84AV☐☐☐4024☐☐0GST07-2M☐☐☐090C3212.5712.913494277-4812
84E84AV☐☐☐4024☐☐0GST06-2M☐☐☐090C3214.2861.5152107244-4210
84E84AV☐☐☐4024☐☐0GST07-2M☐☐☐090C3214.2862.9152107244-4210
84E84AV☐☐☐4024☐☐0GST06-2M☐☐☐090C3215.4001.7164115226-399.4
84E84AV☐☐☐4024☐☐0GST06-2M☐☐☐090C3217.5001.4186131199-348.3
84E84AV☐☐☐4024☐☐0GST06-2M☐☐☐090C3220.0441.4214149174-307.2
84E84AV☐☐☐4024☐☐0GST07-2M☐☐☐090C3220.0442.8214149174-307.2
84E84AV☐☐☐4024☐☐0GST06-2M☐☐☐090C3222.7781.1243170153-266.4
6.4 - 59V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 4.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
84E84AV☐☐☐4024☐☐0GST07-2M☐☐☐090C3222.7782.4243170153-266.4
84E84AV☐☐☐4024☐☐0GST07-2M☐☐☐090C3224.5672.3262183142-245.9
84E84AV☐☐☐4024☐☐0GST06-2M☐☐☐090C3224.9331.2266186140-245.8
84E84AV☐☐☐4024☐☐0GST07-2M☐☐☐090C3227.9172.0297208125-225.2
84E84AV☐☐☐4024☐☐0GST06-2M☐☐☐090C3228.3330.9302211123-215.1
84E84AV☐☐☐4024☐☐0GST06-2M☐☐☐090C3232.2670.9344241108-194.5
84E84AV☐☐☐4024☐☐0GST07-2M☐☐☐090C3232.2671.8344241108-194.5
84E84AV☐☐☐4024☐☐0GST09-2M☐☐☐090C3232.2672.3344241108-194.5
84E84AV☐☐☐4024☐☐0GST07-2M☐☐☐090C3236.6671.539127395-164.0
84E84AV☐☐☐4024☐☐0GST09-2M☐☐☐090C3236.6672.339127395-164.0
90E84AV☐☐☐4024☐☐0GST07-3M☐☐☐090C3239.2001.441128889-153.7
84E84AV☐☐☐4024☐☐0GST07-2M☐☐☐090C3239.1601.541729289-153.7
84E84AV☐☐☐4024☐☐0GST09-2M☐☐☐090C3239.1602.041729289-153.7
90E84AV☐☐☐4024☐☐0GST09-3M☐☐☐090C3240.1362.742129587-153.6
90E84AV☐☐☐4024☐☐0GST09-3M☐☐☐090C3243.2672.745431880-143.4
90E84AV☐☐☐4024☐☐0GST07-3M☐☐☐090C3244.0001.546232379-143.3
84E84AV☐☐☐4024☐☐0GST07-2M☐☐☐090C3244.5001.447433278-143.3
84E84AV☐☐☐4024☐☐0GST09-2M☐☐☐090C3244.5002.247433278-143.3
90E84AV☐☐☐4024☐☐0GST09-3M☐☐☐090C3249.1672.751636171-123.0
84E84AV☐☐☐4024☐☐0GST07-2M☐☐☐090C3249.5001.152736970-122.9
84E84AV☐☐☐4024☐☐0GST09-2M☐☐☐090C3249.5001.752736970-122.9
90E84AV☐☐☐4024☐☐0GST07-3M☐☐☐090C3251.0221.253537568-122.8
90E84AV☐☐☐4024☐☐0GST09-3M☐☐☐090C3253.0442.455739066-112.7
90E84AV☐☐☐4024☐☐0GST07-3M☐☐☐090C3253.9001.256539665-112.7
84E84AV☐☐☐4024☐☐0GST07-2M☐☐☐090C3256.2501.159941962-112.6
84E84AV☐☐☐4024☐☐0GST09-2M☐☐☐090C3256.2501.759941962-112.6
90E84AV☐☐☐4024☐☐0GST09-3M☐☐☐090C3260.2782.463244358-102.4
90E84AV☐☐☐4024☐☐0GST07-3M☐☐☐090C3265.0791.068347854-9.22.2
90E84AV☐☐☐4024☐☐0GST07-3M☐☐☐090C3270.1560.973651550-8.62.1
90E84AV☐☐☐4024☐☐0GST09-3M☐☐☐090C3271.8671.975452848-8.42.0
90E84AV☐☐☐4024☐☐0GST09-3M☐☐☐090C3281.6671.885760043-7.41.8
90E84AV☐☐☐4024☐☐0GST09-3M☐☐☐090C3293.5411.698168737-6.41.6
90E84AV☐☐☐4024☐☐0GST09-3M☐☐☐090C3299.1671.5104072835-6.11.5
90E84AV☐☐☐4024☐☐0GST09-3M☐☐☐090C32113.5851.3119283431-5.31.3
90E84AV☐☐☐4024☐☐0GST09-3M☐☐☐090C32129.0741.1135494827-4.71.1
90E84AV☐☐☐4024☐☐0GST11-3M☐☐☐090C32129.0742.0135494827-4.71.1
90E84AV☐☐☐4024☐☐0GST09-3M☐☐☐090C32141.2891.01482103825-4.31.0
90E84AV☐☐☐4024☐☐0GST11-3M☐☐☐090C32146.9931.71542107924-4.11.0
90E84AV☐☐☐4024☐☐0GST09-3M☐☐☐090C32160.5560.91684117922-3.70.9
90E84AV☐☐☐4024☐☐0GST11-3M☐☐☐090C32158.1941.61660116222-3.80.9
90E84AV☐☐☐4024☐☐0GST11-3M☐☐☐090C32180.1561.41890132319-3.30.8
V00-en_GB-12/20136.4 - 60
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 4.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
90E84AV☐☐☐4024☐☐0GST11-3M☐☐☐090C32207.7781.22180152617-2.90.7
90E84AV☐☐☐4024☐☐0GST14-3M☐☐☐090C32204.7222.52148150317-2.90.7
90E84AV☐☐☐4024☐☐0GST11-3M☐☐☐090C32236.6221.02482173815-2.50.6
90E84AV☐☐☐4024☐☐0GST14-3M☐☐☐090C32236.6222.22482173815-2.50.6
90E84AV☐☐☐4024☐☐0GST11-3M☐☐☐090C32252.1671.02645185214-2.40.6
90E84AV☐☐☐4024☐☐0GST14-3M☐☐☐090C32248.4582.22606182514-2.40.6
90E84AV☐☐☐4024☐☐0GST11-3M☐☐☐090C32268.8891.02821197513-2.20.5
90E84AV☐☐☐4024☐☐0GST14-3M☐☐☐090C32268.8892.02821197513-2.20.5
90E84AV☐☐☐4024☐☐0GST14-3M☐☐☐090C32326.3331.63423239611-1.80.4
90E84AV☐☐☐4024☐☐0GST14-3M☐☐☐090C32363.0001.4380826669.6-1.70.4
90E84AV☐☐☐4024☐☐0GST14-3M☐☐☐090C32412.5001.3432730298.4-1.50.4
6.4 - 61V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 5.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.9 ... 3525 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
78E84AV☐☐☐5524☐☐0GST07-1M☐☐☐100C122.0003.229211763-30073
78E84AV☐☐☐5524☐☐0GST05-1M☐☐☐100C122.0481.330211722-29372
78E84AV☐☐☐5524☐☐0GST06-1M☐☐☐100C122.0481.830211722-29372
78E84AV☐☐☐5524☐☐0GST05-1M☐☐☐100C122.2401.233231574-26866
78E84AV☐☐☐5524☐☐0GST06-1M☐☐☐100C122.2401.833231574-26866
78E84AV☐☐☐5524☐☐0GST07-1M☐☐☐100C122.2403.133231574-26866
78E84AV☐☐☐5524☐☐0GST05-1M☐☐☐100C122.8571.042291234-21051
78E84AV☐☐☐5524☐☐0GST06-1M☐☐☐100C122.8571.742291234-21051
78E84AV☐☐☐5524☐☐0GST07-1M☐☐☐100C122.8572.842291234-21051
78E84AV☐☐☐5524☐☐0GST06-1M☐☐☐100C123.5001.551361007-17142
78E84AV☐☐☐5524☐☐0GST07-1M☐☐☐100C123.5002.551361007-17142
78E84AV☐☐☐5524☐☐0GST06-1M☐☐☐100C124.5561.26747774-13232
78E84AV☐☐☐5524☐☐0GST07-1M☐☐☐100C124.5562.16747774-13232
78E84AV☐☐☐5524☐☐0GST09-1M☐☐☐100C124.6673.06948755-12932
84E84AV☐☐☐5524☐☐0GST05-2M☐☐☐100C125.1870.97553680-11628
84E84AV☐☐☐5524☐☐0GST06-2M☐☐☐100C125.3242.07754662-11328
78E84AV☐☐☐5524☐☐0GST07-1M☐☐☐100C125.5831.88257631-10826
78E84AV☐☐☐5524☐☐0GST06-1M☐☐☐100C125.6671.08358622-10626
78E84AV☐☐☐5524☐☐0GST09-1M☐☐☐100C125.6672.58358622-10626
84E84AV☐☐☐5524☐☐0GST05-2M☐☐☐100C125.8500.98559603-10325
84E84AV☐☐☐5524☐☐0GST06-2M☐☐☐100C125.8502.08559603-10325
84E84AV☐☐☐5524☐☐0GST06-2M☐☐☐100C126.4001.99365551-9423
78E84AV☐☐☐5524☐☐0GST07-1M☐☐☐100C127.3331.410875481-8220
78E84AV☐☐☐5524☐☐0GST09-1M☐☐☐100C127.3332.010875481-8220
84E84AV☐☐☐5524☐☐0GST06-2M☐☐☐100C128.1631.611883432-7418
84E84AV☐☐☐5524☐☐0GST07-2M☐☐☐100C128.8003.112789401-6817
78E84AV☐☐☐5524☐☐0GST07-1M☐☐☐100C128.9001.113191396-6717
78E84AV☐☐☐5524☐☐0GST09-1M☐☐☐100C128.9001.713191396-6717
84E84AV☐☐☐5524☐☐0GST06-2M☐☐☐100C129.0101.513091391-6716
84E84AV☐☐☐5524☐☐0GST07-2M☐☐☐100C129.8562.9143100358-6115
84E84AV☐☐☐5524☐☐0GST06-2M☐☐☐100C1210.0001.4145101353-6015
84E84AV☐☐☐5524☐☐0GST06-2M☐☐☐100C1211.2001.3162113315-5413
84E84AV☐☐☐5524☐☐0GST07-2M☐☐☐100C1211.2002.8162113315-5413
78E84AV☐☐☐5524☐☐0GST09-1M☐☐☐100C1211.2501.3165116313-5313
84E84AV☐☐☐5524☐☐0GST06-2M☐☐☐100C1212.5711.2182127280-4812
84E84AV☐☐☐5524☐☐0GST07-2M☐☐☐100C1212.5712.5182127280-4812
84E84AV☐☐☐5524☐☐0GST06-2M☐☐☐100C1214.2861.1207145247-4210
84E84AV☐☐☐5524☐☐0GST07-2M☐☐☐100C1214.2862.3207145247-4210
84E84AV☐☐☐5524☐☐0GST06-2M☐☐☐100C1215.4001.2223156229-399.5
84E84AV☐☐☐5524☐☐0GST07-2M☐☐☐100C1215.4002.5223156229-399.5
84E84AV☐☐☐5524☐☐0GST06-2M☐☐☐100C1217.5001.1253177201-348.4
V00-en_GB-12/20136.4 - 62
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 5.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.9 ... 3525 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
84E84AV☐☐☐5524☐☐0GST07-2M☐☐☐100C1217.5002.3253177201-348.4
84E84AV☐☐☐5524☐☐0GST06-2M☐☐☐100C1220.0441.0290203176-307.3
84E84AV☐☐☐5524☐☐0GST07-2M☐☐☐100C1220.0442.0290203176-307.3
84E84AV☐☐☐5524☐☐0GST07-2M☐☐☐100C1222.7781.8329231155-266.5
84E84AV☐☐☐5524☐☐0GST07-2M☐☐☐100C1224.5671.7355249144-246.0
84E84AV☐☐☐5524☐☐0GST09-2M☐☐☐100C1224.9332.9361252141-245.9
84E84AV☐☐☐5524☐☐0GST07-2M☐☐☐100C1227.9171.5404283126-225.3
84E84AV☐☐☐5524☐☐0GST09-2M☐☐☐100C1228.3332.9410287124-215.2
84E84AV☐☐☐5524☐☐0GST07-2M☐☐☐100C1232.2671.3467327109-194.6
84E84AV☐☐☐5524☐☐0GST09-2M☐☐☐100C1232.2672.3467327109-194.6
84E84AV☐☐☐5524☐☐0GST11-2M☐☐☐100C1232.2672.9467327109-194.6
84E84AV☐☐☐5524☐☐0GST07-2M☐☐☐100C1236.6671.153037196-164.0
84E84AV☐☐☐5524☐☐0GST09-2M☐☐☐100C1236.6672.353037196-164.0
84E84AV☐☐☐5524☐☐0GST11-2M☐☐☐100C1236.6672.953037196-164.0
90E84AV☐☐☐5524☐☐0GST07-3M☐☐☐100C1239.2001.155839190-153.8
84E84AV☐☐☐5524☐☐0GST07-2M☐☐☐100C1239.1601.156639690-153.8
84E84AV☐☐☐5524☐☐0GST09-2M☐☐☐100C1239.1601.956639690-153.8
84E84AV☐☐☐5524☐☐0GST11-2M☐☐☐100C1239.1602.456639690-153.8
90E84AV☐☐☐5524☐☐0GST09-3M☐☐☐100C1240.1362.057240088-153.7
90E84AV☐☐☐5524☐☐0GST09-3M☐☐☐100C1243.2672.061643182-143.4
90E84AV☐☐☐5524☐☐0GST07-3M☐☐☐100C1244.0001.162743980-143.3
84E84AV☐☐☐5524☐☐0GST07-2M☐☐☐100C1244.5001.064345079-143.3
84E84AV☐☐☐5524☐☐0GST09-2M☐☐☐100C1244.5002.164345079-143.3
84E84AV☐☐☐5524☐☐0GST11-2M☐☐☐100C1244.5002.764345079-143.3
90E84AV☐☐☐5524☐☐0GST09-3M☐☐☐100C1249.1672.070049072-123.0
84E84AV☐☐☐5524☐☐0GST09-2M☐☐☐100C1249.5001.771650171-123.0
84E84AV☐☐☐5524☐☐0GST11-2M☐☐☐100C1249.5002.271650171-123.0
90E84AV☐☐☐5524☐☐0GST07-3M☐☐☐100C1251.0220.972750969-122.9
90E84AV☐☐☐5524☐☐0GST09-3M☐☐☐100C1253.0441.775552967-112.8
84E84AV☐☐☐5524☐☐0GST09-2M☐☐☐100C1256.2501.781356963-112.6
84E84AV☐☐☐5524☐☐0GST11-2M☐☐☐100C1256.2502.281356963-112.6
90E84AV☐☐☐5524☐☐0GST11-3M☐☐☐100C1257.9683.082657861-102.5
90E84AV☐☐☐5524☐☐0GST09-3M☐☐☐100C1260.2781.785860159-102.4
90E84AV☐☐☐5524☐☐0GST11-3M☐☐☐100C1261.2503.087261158-9.82.4
90E84AV☐☐☐5524☐☐0GST11-3M☐☐☐100C1271.0112.5101170850-8.52.1
90E84AV☐☐☐5524☐☐0GST09-3M☐☐☐100C1271.8671.4102371649-8.42.0
90E84AV☐☐☐5524☐☐0GST11-3M☐☐☐100C1280.6942.3114980444-7.41.8
90E84AV☐☐☐5524☐☐0GST09-3M☐☐☐100C1281.6671.3116381443-7.41.8
90E84AV☐☐☐5524☐☐0GST11-3M☐☐☐100C1287.2672.0124387040-6.91.7
90E84AV☐☐☐5524☐☐0GST09-3M☐☐☐100C1293.5411.1133293238-6.41.6
90E84AV☐☐☐5524☐☐0GST09-3M☐☐☐100C1299.1671.1141298936-6.11.5
6.4 - 63V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 5.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.9 ... 3525 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
90E84AV☐☐☐5524☐☐0GST11-3M☐☐☐100C1299.1671.9141298936-6.11.5
90E84AV☐☐☐5524☐☐0GST09-3M☐☐☐100C12113.5850.91618113231-5.31.3
90E84AV☐☐☐5524☐☐0GST11-3M☐☐☐100C12112.9331.61608112631-5.31.3
90E84AV☐☐☐5524☐☐0GST11-3M☐☐☐100C12129.0741.41838128727-4.71.1
90E84AV☐☐☐5524☐☐0GST14-3M☐☐☐100C12130.2783.01855129927-4.61.1
90E84AV☐☐☐5524☐☐0GST14-3M☐☐☐100C12139.2112.71982138825-4.31.1
90E84AV☐☐☐5524☐☐0GST11-3M☐☐☐100C12146.9931.22093146524-4.11.0
90E84AV☐☐☐5524☐☐0GST11-3M☐☐☐100C12158.1941.22253157722-3.80.9
90E84AV☐☐☐5524☐☐0GST14-3M☐☐☐100C12158.1942.52253157722-3.80.9
90E84AV☐☐☐5524☐☐0GST14-3M☐☐☐100C12171.1112.32437170621-3.50.9
90E84AV☐☐☐5524☐☐0GST11-3M☐☐☐100C12180.1561.02565179620-3.30.8
90E84AV☐☐☐5524☐☐0GST11-3M☐☐☐100C12207.7780.92959207117-2.90.7
90E84AV☐☐☐5524☐☐0GST14-3M☐☐☐100C12204.7221.92915204117-2.90.7
90E84AV☐☐☐5524☐☐0GST14-3M☐☐☐100C12236.6221.63370235915-2.50.6
90E84AV☐☐☐5524☐☐0GST14-3M☐☐☐100C12248.4581.63538247714-2.40.6
90E84AV☐☐☐5524☐☐0GST14-3M☐☐☐100C12268.8891.53829268013-2.20.6
90E84AV☐☐☐5524☐☐0GST14-3M☐☐☐100C12326.3331.24647325311-1.80.5
90E84AV☐☐☐5524☐☐0GST14-3M☐☐☐100C12363.0001.1516936189.7-1.70.4
90E84AV☐☐☐5524☐☐0GST14-3M☐☐☐100C12412.5001.0587441128.6-1.50.4
V00-en_GB-12/20136.4 - 64
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 7.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.5 ... 3515 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
78E84AV☐☐☐7524☐☐0GST07-1M☐☐☐100C322.0002.340281758-30073
78E84AV☐☐☐7524☐☐0GST05-1M☐☐☐100C322.0481.041291717-29372
78E84AV☐☐☐7524☐☐0GST06-1M☐☐☐100C322.0481.341291717-29372
78E84AV☐☐☐7524☐☐0GST06-1M☐☐☐100C322.2401.345321569-26865
78E84AV☐☐☐7524☐☐0GST07-1M☐☐☐100C322.2402.345321569-26865
78E84AV☐☐☐7524☐☐0GST09-1M☐☐☐100C322.8103.156401251-21452
78E84AV☐☐☐7524☐☐0GST06-1M☐☐☐100C322.8571.257401230-21051
78E84AV☐☐☐7524☐☐0GST07-1M☐☐☐100C322.8572.157401230-21051
78E84AV☐☐☐7524☐☐0GST06-1M☐☐☐100C323.5001.170491004-17142
78E84AV☐☐☐7524☐☐0GST07-1M☐☐☐100C323.5001.870491004-17142
78E84AV☐☐☐7524☐☐0GST07-1M☐☐☐100C324.5561.59164772-13232
78E84AV☐☐☐7524☐☐0GST09-1M☐☐☐100C324.6672.29466753-12931
84E84AV☐☐☐7524☐☐0GST07-2M☐☐☐100C325.2003.110372676-11528
84E84AV☐☐☐7524☐☐0GST06-2M☐☐☐100C325.3241.510574660-11328
78E84AV☐☐☐7524☐☐0GST07-1M☐☐☐100C325.5831.311278630-10826
78E84AV☐☐☐7524☐☐0GST09-1M☐☐☐100C325.6671.911480620-10626
84E84AV☐☐☐7524☐☐0GST07-2M☐☐☐100C325.7143.011379615-10526
84E84AV☐☐☐7524☐☐0GST06-2M☐☐☐100C325.8501.411681601-10325
84E84AV☐☐☐7524☐☐0GST06-2M☐☐☐100C326.4001.412789549-9423
84E84AV☐☐☐7524☐☐0GST07-2M☐☐☐100C326.4002.812789549-9423
84E84AV☐☐☐7524☐☐0GST09-2M☐☐☐100C327.3053.1144101481-8220
78E84AV☐☐☐7524☐☐0GST07-1M☐☐☐100C327.3331.0147103479-8220
78E84AV☐☐☐7524☐☐0GST09-1M☐☐☐100C327.3331.5147103479-8220
84E84AV☐☐☐7524☐☐0GST09-2M☐☐☐100C328.0273.1159111438-7518
84E84AV☐☐☐7524☐☐0GST06-2M☐☐☐100C328.1631.2161113431-7418
84E84AV☐☐☐7524☐☐0GST07-2M☐☐☐100C328.8002.3174122399-6817
78E84AV☐☐☐7524☐☐0GST09-1M☐☐☐100C328.9001.2179125395-6717
84E84AV☐☐☐7524☐☐0GST06-2M☐☐☐100C329.0101.1178125390-6716
84E84AV☐☐☐7524☐☐0GST07-2M☐☐☐100C329.8562.1195136357-6115
84E84AV☐☐☐7524☐☐0GST06-2M☐☐☐100C3210.0001.0198138352-6015
84E84AV☐☐☐7524☐☐0GST06-2M☐☐☐100C3211.2001.0221155314-5413
84E84AV☐☐☐7524☐☐0GST07-2M☐☐☐100C3211.2002.0221155314-5413
78E84AV☐☐☐7524☐☐0GST09-1M☐☐☐100C3211.2501.0226158312-5313
84E84AV☐☐☐7524☐☐0GST09-2M☐☐☐100C3212.3623.1244171284-4912
84E84AV☐☐☐7524☐☐0GST07-2M☐☐☐100C3212.5711.8249174280-4812
84E84AV☐☐☐7524☐☐0GST09-2M☐☐☐100C3214.0483.1278194250-4310
84E84AV☐☐☐7524☐☐0GST07-2M☐☐☐100C3214.2861.7282198246-4210
84E84AV☐☐☐7524☐☐0GST07-2M☐☐☐100C3215.4001.8305213228-399.5
84E84AV☐☐☐7524☐☐0GST07-2M☐☐☐100C3217.5001.7346242201-348.4
84E84AV☐☐☐7524☐☐0GST07-2M☐☐☐100C3220.0441.5396277175-307.3
84E84AV☐☐☐7524☐☐0GST09-2M☐☐☐100C3220.5332.5406284171-297.1
6.4 - 65V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 7.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.5 ... 3515 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
84E84AV☐☐☐7524☐☐0GST07-2M☐☐☐100C3222.7781.3450315154-266.4
84E84AV☐☐☐7524☐☐0GST09-2M☐☐☐100C3223.3332.5461323151-266.3
84E84AV☐☐☐7524☐☐0GST07-2M☐☐☐100C3224.5671.2486340143-246.0
84E84AV☐☐☐7524☐☐0GST09-2M☐☐☐100C3224.9332.1493345141-245.9
84E84AV☐☐☐7524☐☐0GST07-2M☐☐☐100C3227.9171.1552386126-225.3
84E84AV☐☐☐7524☐☐0GST09-2M☐☐☐100C3228.3332.1560392124-215.2
84E84AV☐☐☐7524☐☐0GST07-2M☐☐☐100C3232.2670.9638447109-194.5
84E84AV☐☐☐7524☐☐0GST09-2M☐☐☐100C3232.2671.7638447109-194.5
84E84AV☐☐☐7524☐☐0GST11-2M☐☐☐100C3232.2672.1638447109-194.5
84E84AV☐☐☐7524☐☐0GST09-2M☐☐☐100C3236.6671.772550796-164.0
84E84AV☐☐☐7524☐☐0GST11-2M☐☐☐100C3236.6672.172550796-164.0
84E84AV☐☐☐7524☐☐0GST09-2M☐☐☐100C3239.1601.477454290-153.7
84E84AV☐☐☐7524☐☐0GST11-2M☐☐☐100C3239.1601.877454290-153.7
90E84AV☐☐☐7524☐☐0GST09-3M☐☐☐100C3240.1361.578254788-153.7
90E84AV☐☐☐7524☐☐0GST11-3M☐☐☐100C3240.8162.779555686-153.6
90E84AV☐☐☐7524☐☐0GST09-3M☐☐☐100C3243.2671.584359081-143.4
90E84AV☐☐☐7524☐☐0GST11-3M☐☐☐100C3244.0002.785760080-143.3
84E84AV☐☐☐7524☐☐0GST09-2M☐☐☐100C3244.5001.688061679-143.3
84E84AV☐☐☐7524☐☐0GST11-2M☐☐☐100C3244.5002.088061679-143.3
90E84AV☐☐☐7524☐☐0GST09-3M☐☐☐100C3249.1671.595867072-123.0
84E84AV☐☐☐7524☐☐0GST09-2M☐☐☐100C3249.5001.297968571-123.0
84E84AV☐☐☐7524☐☐0GST11-2M☐☐☐100C3249.5001.697968571-123.0
90E84AV☐☐☐7524☐☐0GST11-3M☐☐☐100C3250.0002.797468270-122.9
90E84AV☐☐☐7524☐☐0GST09-3M☐☐☐100C3253.0441.3103372366-112.8
84E84AV☐☐☐7524☐☐0GST09-2M☐☐☐100C3256.2501.2111277963-112.6
84E84AV☐☐☐7524☐☐0GST11-2M☐☐☐100C3256.2501.6111277963-112.6
90E84AV☐☐☐7524☐☐0GST11-3M☐☐☐100C3257.9682.2112979061-102.5
90E84AV☐☐☐7524☐☐0GST09-3M☐☐☐100C3260.2781.3117482258-102.4
90E84AV☐☐☐7524☐☐0GST11-3M☐☐☐100C3261.2502.2119383557-9.82.4
90E84AV☐☐☐7524☐☐0GST11-3M☐☐☐100C3271.0111.8138396850-8.52.1
90E84AV☐☐☐7524☐☐0GST09-3M☐☐☐100C3271.8671.0140098049-8.42.0
90E84AV☐☐☐7524☐☐0GST11-3M☐☐☐100C3280.6941.71571110044-7.41.8
90E84AV☐☐☐7524☐☐0GST09-3M☐☐☐100C3281.6670.91590111343-7.41.8
90E84AV☐☐☐7524☐☐0GST11-3M☐☐☐100C3287.2671.51699119040-6.91.7
90E84AV☐☐☐7524☐☐0GST14-3M☐☐☐100C3293.5412.71822127538-6.41.6
90E84AV☐☐☐7524☐☐0GST11-3M☐☐☐100C3299.1671.41931135235-6.11.5
90E84AV☐☐☐7524☐☐0GST14-3M☐☐☐100C32106.2962.72070144933-5.61.4
90E84AV☐☐☐7524☐☐0GST11-3M☐☐☐100C32112.9331.22199154031-5.31.3
90E84AV☐☐☐7524☐☐0GST11-3M☐☐☐100C32129.0741.12514176027-4.71.1
90E84AV☐☐☐7524☐☐0GST14-3M☐☐☐100C32130.2782.22537177627-4.61.1
90E84AV☐☐☐7524☐☐0GST14-3M☐☐☐100C32139.2112.02711189825-4.31.1
V00-en_GB-12/20136.4 - 66
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 7.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.5 ... 3515 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
90E84AV☐☐☐7524☐☐0GST14-3M☐☐☐100C32158.1941.83081215622-3.80.9
90E84AV☐☐☐7524☐☐0GST14-3M☐☐☐100C32171.1111.73332233321-3.50.9
90E84AV☐☐☐7524☐☐0GST14-3M☐☐☐100C32204.7221.43987279117-2.90.7
90E84AV☐☐☐7524☐☐0GST14-3M☐☐☐100C32236.6221.24608322615-2.50.6
90E84AV☐☐☐7524☐☐0GST14-3M☐☐☐100C32248.4581.24838338714-2.40.6
90E84AV☐☐☐7524☐☐0GST14-3M☐☐☐100C32268.8891.15236366513-2.20.5
6.4 - 67V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 11.00 kW
n22/n2 = 1 ... 24.0
n1 = 147.1 ... 3530 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
78E84AV☐☐☐1134☐☐0GST07-1M☐☐☐112C222.0001.659381765-30074
78E84AV☐☐☐1134☐☐0GST06-1M☐☐☐112C222.0480.960381724-29372
78E84AV☐☐☐1134☐☐0GST09-1M☐☐☐112C222.0483.260381724-29372
78E84AV☐☐☐1134☐☐0GST07-1M☐☐☐112C222.2401.566421576-26866
78E84AV☐☐☐1134☐☐0GST09-1M☐☐☐112C222.3332.968441513-25763
78E84AV☐☐☐1134☐☐0GST09-1M☐☐☐112C222.8102.582531256-21452
78E84AV☐☐☐1134☐☐0GST07-1M☐☐☐112C222.8571.484541236-21052
78E84AV☐☐☐1134☐☐0GST09-1M☐☐☐112C223.4442.2101651025-17443
78E84AV☐☐☐1134☐☐0GST07-1M☐☐☐112C223.5001.3103661009-17142
78E84AV☐☐☐1134☐☐0GST07-1M☐☐☐112C224.5561.013486775-13232
78E84AV☐☐☐1134☐☐0GST09-1M☐☐☐112C224.6671.713788756-12932
84E84AV☐☐☐1134☐☐0GST07-2M☐☐☐112C225.2002.115096679-11528
84E84AV☐☐☐1134☐☐0GST06-2M☐☐☐112C225.3241.015498663-11328
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C225.3243.215498663-11328
78E84AV☐☐☐1134☐☐0GST07-1M☐☐☐112C225.5830.9164105632-10826
78E84AV☐☐☐1134☐☐0GST09-1M☐☐☐112C225.6671.5166106623-10626
84E84AV☐☐☐1134☐☐0GST07-2M☐☐☐112C225.7142.0165106618-10526
84E84AV☐☐☐1134☐☐0GST06-2M☐☐☐112C225.8501.0169108603-10325
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C225.8503.2169108603-10325
84E84AV☐☐☐1134☐☐0GST06-2M☐☐☐112C226.4000.9185118552-9423
84E84AV☐☐☐1134☐☐0GST07-2M☐☐☐112C226.4001.9185118552-9423
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C226.6672.9193123530-9022
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C227.3052.5211135483-8220
78E84AV☐☐☐1134☐☐0GST09-1M☐☐☐112C227.3331.2215138481-8220
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C228.0272.5232148440-7518
84E84AV☐☐☐1134☐☐0GST07-2M☐☐☐112C228.8001.6254163401-6817
78E84AV☐☐☐1134☐☐0GST09-1M☐☐☐112C228.9001.0261167397-6717
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C229.0103.2260167392-6716
84E84AV☐☐☐1134☐☐0GST07-2M☐☐☐112C229.8561.5285182358-6115
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C2210.2672.9296190344-5814
84E84AV☐☐☐1134☐☐0GST07-2M☐☐☐112C2211.2001.4323207315-5413
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C2211.6672.7337216303-5113
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C2212.3622.5357228286-4912
84E84AV☐☐☐1134☐☐0GST07-2M☐☐☐112C2212.5711.2363232281-4812
84E84AV☐☐☐1134☐☐0GST11-2M☐☐☐112C2212.5713.1363232281-4812
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C2214.0482.4406260251-4311
84E84AV☐☐☐1134☐☐0GST07-2M☐☐☐112C2214.2861.2413264247-4210
84E84AV☐☐☐1134☐☐0GST11-2M☐☐☐112C2214.2863.1413264247-4210
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C2215.1562.5438280233-409.7
84E84AV☐☐☐1134☐☐0GST07-2M☐☐☐112C2215.4001.2445285229-399.6
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C2217.2222.4497318205-358.5
V00-en_GB-12/20136.4 - 68
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 11.00 kW
n22/n2 = 1 ... 24.0
n1 = 147.1 ... 3530 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
84E84AV☐☐☐1134☐☐0GST07-2M☐☐☐112C2217.5001.1505323202-348.4
84E84AV☐☐☐1134☐☐0GST07-2M☐☐☐112C2220.0441.0579370176-307.3
84E84AV☐☐☐1134☐☐0GST11-2M☐☐☐112C2220.2892.5586375174-307.3
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C2220.5331.9593379172-297.2
84E84AV☐☐☐1134☐☐0GST11-2M☐☐☐112C2223.0562.5666426153-266.4
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C2223.3331.9674431151-266.3
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C2224.9331.7720461142-245.9
84E84AV☐☐☐1134☐☐0GST11-2M☐☐☐112C2224.9332.1720461142-245.9
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C2228.3331.6818524125-215.2
84E84AV☐☐☐1134☐☐0GST11-2M☐☐☐112C2228.3332.1818524125-215.2
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C2232.2671.3932596109-194.6
84E84AV☐☐☐1134☐☐0GST11-2M☐☐☐112C2232.2671.6932596109-194.6
84E84AV☐☐☐1134☐☐0GST14-2M☐☐☐112C2232.2672.0932596109-194.6
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C2236.6671.2105967896-164.0
84E84AV☐☐☐1134☐☐0GST11-2M☐☐☐112C2236.6671.6105967896-164.0
84E84AV☐☐☐1134☐☐0GST14-2M☐☐☐112C2236.6672.0105967896-164.0
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C2239.1601.1113172490-153.8
84E84AV☐☐☐1134☐☐0GST11-2M☐☐☐112C2239.1601.4113172490-153.8
84E84AV☐☐☐1134☐☐0GST14-2M☐☐☐112C2239.1601.7113172490-153.8
90E84AV☐☐☐1134☐☐0GST09-3M☐☐☐112C2240.1361.0114273188-153.7
90E84AV☐☐☐1134☐☐0GST11-3M☐☐☐112C2240.8161.9116174387-153.6
90E84AV☐☐☐1134☐☐0GST14-3M☐☐☐112C2242.5803.2121177583-143.5
90E84AV☐☐☐1134☐☐0GST09-3M☐☐☐112C2243.2671.0123178882-143.4
90E84AV☐☐☐1134☐☐0GST11-3M☐☐☐112C2244.0001.8125180180-143.3
84E84AV☐☐☐1134☐☐0GST09-2M☐☐☐112C2244.5001.1128582279-143.3
84E84AV☐☐☐1134☐☐0GST11-2M☐☐☐112C2244.5001.5128582279-143.3
84E84AV☐☐☐1134☐☐0GST14-2M☐☐☐112C2244.5001.9128582279-143.3
90E84AV☐☐☐1134☐☐0GST14-3M☐☐☐112C2248.3863.2137688173-123.0
90E84AV☐☐☐1134☐☐0GST09-3M☐☐☐112C2249.1671.0139889572-123.0
84E84AV☐☐☐1134☐☐0GST11-2M☐☐☐112C2249.5001.2142991571-123.0
84E84AV☐☐☐1134☐☐0GST14-2M☐☐☐112C2249.5001.5142991571-123.0
90E84AV☐☐☐1134☐☐0GST11-3M☐☐☐112C2250.0001.8142291071-122.9
90E84AV☐☐☐1134☐☐0GST14-3M☐☐☐112C2253.1483.0151296766-112.8
84E84AV☐☐☐1134☐☐0GST11-2M☐☐☐112C2256.2501.21624103963-112.6
84E84AV☐☐☐1134☐☐0GST14-2M☐☐☐112C2256.2501.51624103963-112.6
90E84AV☐☐☐1134☐☐0GST11-3M☐☐☐112C2257.9681.51649105561-102.5
90E84AV☐☐☐1134☐☐0GST14-3M☐☐☐112C2259.3212.71687108060-102.5
90E84AV☐☐☐1134☐☐0GST11-3M☐☐☐112C2261.2501.51742111558-9.82.4
90E84AV☐☐☐1134☐☐0GST14-3M☐☐☐112C2269.0422.41964125751-8.72.1
90E84AV☐☐☐1134☐☐0GST11-3M☐☐☐112C2271.0111.22020129350-8.52.1
90E84AV☐☐☐1134☐☐0GST14-3M☐☐☐112C2278.4572.42231142845-7.71.9
6.4 - 69V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 11.00 kW
n22/n2 = 1 ... 24.0
n1 = 147.1 ... 3530 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
90E84AV☐☐☐1134☐☐0GST11-3M☐☐☐112C2280.6941.22295146944-7.41.8
90E84AV☐☐☐1134☐☐0GST11-3M☐☐☐112C2287.2671.02482158841-6.91.7
90E84AV☐☐☐1134☐☐0GST14-3M☐☐☐112C2293.5412.02660170338-6.41.6
90E84AV☐☐☐1134☐☐0GST14-3M☐☐☐112C2296.1572.02735175037-6.21.5
90E84AV☐☐☐1134☐☐0GST11-3M☐☐☐112C2299.1670.92820180536-6.11.5
90E84AV☐☐☐1134☐☐0GST14-3M☐☐☐112C22106.2961.93023193533-5.61.4
90E84AV☐☐☐1134☐☐0GST14-3M☐☐☐112C22130.2781.53705237127-4.61.1
90E84AV☐☐☐1134☐☐0GST14-3M☐☐☐112C22139.2111.43959253425-4.31.1
90E84AV☐☐☐1134☐☐0GST14-3M☐☐☐112C22158.1941.24499287922-3.80.9
90E84AV☐☐☐1134☐☐0GST14-3M☐☐☐112C22171.1111.24866311521-3.50.9
90E84AV☐☐☐1134☐☐0GST14-3M☐☐☐112C22204.7221.05822372617-2.90.7
V00-en_GB-12/20136.4 - 70
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 15.00 kW
n22/n2 = 1 ... 24.0
n1 = 148.3 ... 3560 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
78E84AV☐☐☐1534☐☐0GST07-1M☐☐☐132C122.0001.279511780-30074
78E84AV☐☐☐1534☐☐0GST09-1M☐☐☐132C122.0483.181521739-29372
78E84AV☐☐☐1534☐☐0GST07-1M☐☐☐132C122.2401.189571589-26866
78E84AV☐☐☐1534☐☐0GST09-1M☐☐☐132C122.3333.093591526-25764
78E84AV☐☐☐1534☐☐0GST09-1M☐☐☐132C122.8102.8111711267-21453
78E84AV☐☐☐1534☐☐0GST07-1M☐☐☐132C122.8571.1113731246-21052
78E84AV☐☐☐1534☐☐0GST09-1M☐☐☐132C123.4442.4137871034-17443
78E84AV☐☐☐1534☐☐0GST07-1M☐☐☐132C123.5000.9139891017-17142
78E84AV☐☐☐1534☐☐0GST09-1M☐☐☐132C124.6671.5185118763-12932
84E84AV☐☐☐1534☐☐0GST07-2M☐☐☐132C125.2001.6203130685-11529
78E84AV☐☐☐1534☐☐0GST09-1M☐☐☐132C125.6671.6225144628-10626
84E84AV☐☐☐1534☐☐0GST07-2M☐☐☐132C125.7141.5223143623-10526
84E84AV☐☐☐1534☐☐0GST07-2M☐☐☐132C126.4001.4250160556-9423
84E84AV☐☐☐1534☐☐0GST09-2M☐☐☐132C126.6673.1260167534-9022
84E84AV☐☐☐1534☐☐0GST09-2M☐☐☐132C127.3052.9285183487-8220
84E84AV☐☐☐1534☐☐0GST09-2M☐☐☐132C128.0272.7313201444-7519
84E84AV☐☐☐1534☐☐0GST07-2M☐☐☐132C128.8001.2344220405-6817
84E84AV☐☐☐1534☐☐0GST09-2M☐☐☐132C129.0102.4352225395-6717
84E84AV☐☐☐1534☐☐0GST07-2M☐☐☐132C129.8561.1385246361-6115
84E84AV☐☐☐1534☐☐0GST09-2M☐☐☐132C1210.2672.2401257347-5814
84E84AV☐☐☐1534☐☐0GST07-2M☐☐☐132C1211.2001.0437280318-5413
84E84AV☐☐☐1534☐☐0GST09-2M☐☐☐132C1211.6672.0456292305-5113
84E84AV☐☐☐1534☐☐0GST09-2M☐☐☐132C1212.3621.9483309288-4912
84E84AV☐☐☐1534☐☐0GST07-2M☐☐☐132C1212.5710.9491314283-4812
84E84AV☐☐☐1534☐☐0GST09-2M☐☐☐132C1214.0481.8548351253-4311
84E84AV☐☐☐1534☐☐0GST09-2M☐☐☐132C1215.1561.9592379235-409.8
84E84AV☐☐☐1534☐☐0GST07-2M☐☐☐132C1215.4000.9601385231-399.6
84E84AV☐☐☐1534☐☐0GST09-2M☐☐☐132C1217.2221.7672430207-358.6
84E84AV☐☐☐1534☐☐0GST11-2M☐☐☐132C1220.2893.0792507176-307.3
84E84AV☐☐☐1534☐☐0GST09-2M☐☐☐132C1220.5331.6802513173-297.2
84E84AV☐☐☐1534☐☐0GST11-2M☐☐☐132C1223.0562.8900576154-266.4
84E84AV☐☐☐1534☐☐0GST09-2M☐☐☐132C1223.3331.4911583153-266.4
84E84AV☐☐☐1534☐☐0GST09-2M☐☐☐132C1224.9331.4973623143-246.0
84E84AV☐☐☐1534☐☐0GST11-2M☐☐☐132C1224.9332.4973623143-246.0
84E84AV☐☐☐1534☐☐0GST09-2M☐☐☐132C1228.3331.21106708126-215.2
84E84AV☐☐☐1534☐☐0GST11-2M☐☐☐132C1228.3332.31106708126-215.2
84E84AV☐☐☐1534☐☐0GST11-2M☐☐☐132C1232.2671.91260806110-194.6
84E84AV☐☐☐1534☐☐0GST14-2M☐☐☐132C1232.2673.21260806110-194.6
84E84AV☐☐☐1534☐☐0GST11-2M☐☐☐132C1236.6671.7143291697-164.1
84E84AV☐☐☐1534☐☐0GST14-2M☐☐☐132C1236.6673.2143291697-164.1
84E84AV☐☐☐1534☐☐0GST11-2M☐☐☐132C1239.1601.6152997991-153.8
6.4 - 71V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 15.00 kW
n22/n2 = 1 ... 24.0
n1 = 148.3 ... 3560 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
84E84AV☐☐☐1534☐☐0GST14-2M☐☐☐132C1239.1602.7152997991-153.8
90E84AV☐☐☐1534☐☐0GST14-3M☐☐☐132C1240.1852.5154598989-153.7
90E84AV☐☐☐1534☐☐0GST11-3M☐☐☐132C1240.8161.41570100587-153.6
90E84AV☐☐☐1534☐☐0GST14-3M☐☐☐132C1242.5802.51637104884-143.5
90E84AV☐☐☐1534☐☐0GST11-3M☐☐☐132C1244.0001.31692108381-143.4
84E84AV☐☐☐1534☐☐0GST11-2M☐☐☐132C1244.5001.61737111280-143.3
84E84AV☐☐☐1534☐☐0GST14-2M☐☐☐132C1244.5003.01737111280-143.3
90E84AV☐☐☐1534☐☐0GST14-3M☐☐☐132C1248.3862.51861119174-123.1
84E84AV☐☐☐1534☐☐0GST14-2M☐☐☐132C1249.5002.11933123772-123.0
90E84AV☐☐☐1534☐☐0GST11-3M☐☐☐132C1250.0001.31923123171-123.0
90E84AV☐☐☐1534☐☐0GST14-3M☐☐☐132C1253.1482.22044130867-112.8
84E84AV☐☐☐1534☐☐0GST14-2M☐☐☐132C1256.2502.12196140663-112.6
90E84AV☐☐☐1534☐☐0GST11-3M☐☐☐132C1257.9681.12229142761-102.6
90E84AV☐☐☐1534☐☐0GST14-3M☐☐☐132C1259.3212.22281146060-102.5
90E84AV☐☐☐1534☐☐0GST11-3M☐☐☐132C1261.2501.12355150758-9.82.4
90E84AV☐☐☐1534☐☐0GST14-3M☐☐☐132C1269.0421.72655169952-8.72.2
90E84AV☐☐☐1534☐☐0GST11-3M☐☐☐132C1271.0110.92731174850-8.52.1
90E84AV☐☐☐1534☐☐0GST14-3M☐☐☐132C1278.4571.73017193145-7.71.9
90E84AV☐☐☐1534☐☐0GST14-3M☐☐☐132C1293.5411.53597230238-6.41.6
90E84AV☐☐☐1534☐☐0GST14-3M☐☐☐132C1296.1571.53698236737-6.21.5
90E84AV☐☐☐1534☐☐0GST14-3M☐☐☐132C12106.2961.44088261634-5.61.4
90E84AV☐☐☐1534☐☐0GST14-3M☐☐☐132C12130.2781.15010320627-4.61.1
90E84AV☐☐☐1534☐☐0GST14-3M☐☐☐132C12139.2111.05353342626-4.31.1
90E84AV☐☐☐1534☐☐0GST14-3M☐☐☐132C12158.1940.96083389323-3.80.9
V00-en_GB-12/20136.4 - 72
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 18.50 kW
n22/n2 = 1 ... 24.0
n1 = 148.3 ... 3560 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
78E84AV☐☐☐1834☐☐0GST07-1M☐☐☐132C222.0000.998631780-30074
78E84AV☐☐☐1834☐☐0GST09-1M☐☐☐132C222.0482.5100641739-29372
78E84AV☐☐☐1834☐☐0GST07-1M☐☐☐132C222.2400.9110701589-26866
78E84AV☐☐☐1834☐☐0GST09-1M☐☐☐132C222.3332.4114731526-25764
78E84AV☐☐☐1834☐☐0GST09-1M☐☐☐132C222.8102.3137881267-21453
78E84AV☐☐☐1834☐☐0GST09-1M☐☐☐132C223.4442.01681081034-17443
78E84AV☐☐☐1834☐☐0GST09-1M☐☐☐132C224.6671.2228146763-12932
84E84AV☐☐☐1834☐☐0GST07-2M☐☐☐132C225.2001.3250160685-11529
84E84AV☐☐☐1834☐☐0GST09-2M☐☐☐132C225.3242.9256164669-11328
78E84AV☐☐☐1834☐☐0GST09-1M☐☐☐132C225.6671.3277177628-10626
84E84AV☐☐☐1834☐☐0GST07-2M☐☐☐132C225.7141.2275176623-10526
84E84AV☐☐☐1834☐☐0GST09-2M☐☐☐132C225.8502.7282180609-10325
84E84AV☐☐☐1834☐☐0GST07-2M☐☐☐132C226.4001.1308197556-9423
84E84AV☐☐☐1834☐☐0GST09-2M☐☐☐132C226.6672.5321205534-9022
84E84AV☐☐☐1834☐☐0GST09-2M☐☐☐132C227.3052.4352225487-8220
84E84AV☐☐☐1834☐☐0GST09-2M☐☐☐132C228.0272.2387247444-7519
84E84AV☐☐☐1834☐☐0GST07-2M☐☐☐132C228.8000.9424271405-6817
84E84AV☐☐☐1834☐☐0GST09-2M☐☐☐132C229.0101.9434278395-6717
84E84AV☐☐☐1834☐☐0GST09-2M☐☐☐132C2210.2671.8494316347-5814
84E84AV☐☐☐1834☐☐0GST09-2M☐☐☐132C2211.6671.6562360305-5113
84E84AV☐☐☐1834☐☐0GST09-2M☐☐☐132C2212.3621.6595381288-4912
84E84AV☐☐☐1834☐☐0GST11-2M☐☐☐132C2212.5713.1605387283-4812
84E84AV☐☐☐1834☐☐0GST09-2M☐☐☐132C2214.0481.4676433253-4311
84E84AV☐☐☐1834☐☐0GST11-2M☐☐☐132C2214.2862.8688440249-4210
84E84AV☐☐☐1834☐☐0GST09-2M☐☐☐132C2215.1561.6730467235-409.8
84E84AV☐☐☐1834☐☐0GST11-2M☐☐☐132C2215.4003.1742475231-399.6
84E84AV☐☐☐1834☐☐0GST09-2M☐☐☐132C2217.2221.4829531207-358.6
84E84AV☐☐☐1834☐☐0GST11-2M☐☐☐132C2217.5002.8843539203-348.5
84E84AV☐☐☐1834☐☐0GST11-2M☐☐☐132C2220.2892.4977625176-307.3
84E84AV☐☐☐1834☐☐0GST09-2M☐☐☐132C2220.5331.3989633173-297.2
84E84AV☐☐☐1834☐☐0GST11-2M☐☐☐132C2223.0562.21110711154-266.4
84E84AV☐☐☐1834☐☐0GST09-2M☐☐☐132C2223.3331.11124719153-266.4
84E84AV☐☐☐1834☐☐0GST14-2M☐☐☐132C2224.5673.21183757145-246.0
84E84AV☐☐☐1834☐☐0GST09-2M☐☐☐132C2224.9331.11201768143-246.0
84E84AV☐☐☐1834☐☐0GST11-2M☐☐☐132C2224.9332.01201768143-246.0
84E84AV☐☐☐1834☐☐0GST14-2M☐☐☐132C2227.9173.21344860128-225.3
84E84AV☐☐☐1834☐☐0GST09-2M☐☐☐132C2228.3330.91364873126-215.2
84E84AV☐☐☐1834☐☐0GST11-2M☐☐☐132C2228.3331.81364873126-215.2
84E84AV☐☐☐1834☐☐0GST11-2M☐☐☐132C2232.2671.51554994110-194.6
84E84AV☐☐☐1834☐☐0GST14-2M☐☐☐132C2232.2672.61554994110-194.6
84E84AV☐☐☐1834☐☐0GST11-2M☐☐☐132C2236.6671.41766113097-164.1
6.4 - 73V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 18.50 kW
n22/n2 = 1 ... 24.0
n1 = 148.3 ... 3560 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
84E84AV☐☐☐1834☐☐0GST14-2M☐☐☐132C2236.6672.61766113097-164.1
84E84AV☐☐☐1834☐☐0GST11-2M☐☐☐132C2239.1601.31886120791-153.8
84E84AV☐☐☐1834☐☐0GST14-2M☐☐☐132C2239.1602.21886120791-153.8
90E84AV☐☐☐1834☐☐0GST14-3M☐☐☐132C2240.1852.01906122089-153.7
90E84AV☐☐☐1834☐☐0GST11-3M☐☐☐132C2240.8161.11936123987-153.6
90E84AV☐☐☐1834☐☐0GST14-3M☐☐☐132C2242.5802.02020129384-143.5
90E84AV☐☐☐1834☐☐0GST11-3M☐☐☐132C2244.0001.12087133681-143.4
84E84AV☐☐☐1834☐☐0GST11-2M☐☐☐132C2244.5001.32143137180-143.3
84E84AV☐☐☐1834☐☐0GST14-2M☐☐☐132C2244.5002.42143137180-143.3
90E84AV☐☐☐1834☐☐0GST14-3M☐☐☐132C2248.3862.02295146974-123.1
84E84AV☐☐☐1834☐☐0GST14-2M☐☐☐132C2249.5001.72383152572-123.0
90E84AV☐☐☐1834☐☐0GST11-3M☐☐☐132C2250.0001.12371151871-123.0
90E84AV☐☐☐1834☐☐0GST14-3M☐☐☐132C2253.1481.82521161367-112.8
84E84AV☐☐☐1834☐☐0GST14-2M☐☐☐132C2256.2501.72708173363-112.6
90E84AV☐☐☐1834☐☐0GST14-3M☐☐☐132C2259.3211.82814180160-102.5
90E84AV☐☐☐1834☐☐0GST14-3M☐☐☐132C2269.0421.43275209652-8.72.2
90E84AV☐☐☐1834☐☐0GST14-3M☐☐☐132C2278.4571.43721238245-7.71.9
90E84AV☐☐☐1834☐☐0GST14-3M☐☐☐132C2293.5411.24436283938-6.41.6
90E84AV☐☐☐1834☐☐0GST14-3M☐☐☐132C2296.1571.24561291937-6.21.5
90E84AV☐☐☐1834☐☐0GST14-3M☐☐☐132C22106.2961.15041322734-5.61.4
90E84AV☐☐☐1834☐☐0GST14-3M☐☐☐132C22130.2780.96179395427-4.61.1
V00-en_GB-12/20136.4 - 74
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 22.00 kW
n22/n2 = 1 ... 24.0
n1 = 147.9 ... 3550 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
78E84AV☐☐☐2234☐☐0GST09-1M☐☐☐132C322.0482.1119761734-29372
78E84AV☐☐☐2234☐☐0GST09-1M☐☐☐132C322.3332.0136871521-25763
78E84AV☐☐☐2234☐☐0GST09-1M☐☐☐132C322.8101.91641051264-21453
78E84AV☐☐☐2234☐☐0GST09-1M☐☐☐132C323.4441.72011291031-17443
78E84AV☐☐☐2234☐☐0GST09-1M☐☐☐132C324.6671.0272174761-12932
84E84AV☐☐☐2234☐☐0GST07-2M☐☐☐132C325.2001.1299191683-11528
84E84AV☐☐☐2234☐☐0GST09-2M☐☐☐132C325.3242.4306196667-11328
78E84AV☐☐☐2234☐☐0GST09-1M☐☐☐132C325.6671.1330211627-10626
84E84AV☐☐☐2234☐☐0GST07-2M☐☐☐132C325.7141.0328210621-10526
84E84AV☐☐☐2234☐☐0GST09-2M☐☐☐132C325.8502.3336215607-10325
84E84AV☐☐☐2234☐☐0GST07-2M☐☐☐132C326.4000.9368235555-9423
84E84AV☐☐☐2234☐☐0GST11-2M☐☐☐132C326.4003.2368235555-9423
84E84AV☐☐☐2234☐☐0GST09-2M☐☐☐132C326.6672.1383245533-9022
84E84AV☐☐☐2234☐☐0GST09-2M☐☐☐132C327.3052.0419268486-8220
84E84AV☐☐☐2234☐☐0GST09-2M☐☐☐132C328.0271.8461295442-7518
84E84AV☐☐☐2234☐☐0GST09-2M☐☐☐132C329.0101.6517331394-6716
84E84AV☐☐☐2234☐☐0GST11-2M☐☐☐132C329.8563.1566362360-6115
84E84AV☐☐☐2234☐☐0GST09-2M☐☐☐132C3210.2671.5590377346-5814
84E84AV☐☐☐2234☐☐0GST11-2M☐☐☐132C3211.2002.8643412317-5413
84E84AV☐☐☐2234☐☐0GST09-2M☐☐☐132C3211.6671.4670429304-5113
84E84AV☐☐☐2234☐☐0GST09-2M☐☐☐132C3212.3621.3710454287-4912
84E84AV☐☐☐2234☐☐0GST11-2M☐☐☐132C3212.5712.6722462282-4812
84E84AV☐☐☐2234☐☐0GST09-2M☐☐☐132C3214.0481.2807516253-4311
84E84AV☐☐☐2234☐☐0GST11-2M☐☐☐132C3214.2862.4820525249-4210
84E84AV☐☐☐2234☐☐0GST09-2M☐☐☐132C3215.1561.3870557234-409.8
84E84AV☐☐☐2234☐☐0GST11-2M☐☐☐132C3215.4002.6884566231-399.6
84E84AV☐☐☐2234☐☐0GST09-2M☐☐☐132C3217.2221.2989633206-358.6
84E84AV☐☐☐2234☐☐0GST11-2M☐☐☐132C3217.5002.31005643203-348.5
84E84AV☐☐☐2234☐☐0GST14-2M☐☐☐132C3220.0442.91151737177-307.4
84E84AV☐☐☐2234☐☐0GST11-2M☐☐☐132C3220.2892.01165746175-307.3
84E84AV☐☐☐2234☐☐0GST09-2M☐☐☐132C3220.5331.11179755173-297.2
84E84AV☐☐☐2234☐☐0GST14-2M☐☐☐132C3222.7782.91308837156-266.5
84E84AV☐☐☐2234☐☐0GST11-2M☐☐☐132C3223.0561.91324847154-266.4
84E84AV☐☐☐2234☐☐0GST09-2M☐☐☐132C3223.3331.01340858152-266.3
84E84AV☐☐☐2234☐☐0GST14-2M☐☐☐132C3224.5672.71411903145-246.0
84E84AV☐☐☐2234☐☐0GST09-2M☐☐☐132C3224.9330.91432916142-245.9
84E84AV☐☐☐2234☐☐0GST11-2M☐☐☐132C3224.9331.71432916142-245.9
84E84AV☐☐☐2234☐☐0GST14-2M☐☐☐132C3227.9172.716031026127-225.3
84E84AV☐☐☐2234☐☐0GST11-2M☐☐☐132C3228.3331.516271041125-215.2
84E84AV☐☐☐2234☐☐0GST11-2M☐☐☐132C3232.2671.318531186110-194.6
84E84AV☐☐☐2234☐☐0GST14-2M☐☐☐132C3232.2672.218531186110-194.6
6.4 - 75V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Selection tables
ƒ 120 Hz: PN = 22.00 kW
n22/n2 = 1 ... 24.0
n1 = 147.9 ... 3550 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
84E84AV☐☐☐2234☐☐0GST11-2M☐☐☐132C3236.6671.22105134897-164.0
84E84AV☐☐☐2234☐☐0GST14-2M☐☐☐132C3236.6672.22105134897-164.0
84E84AV☐☐☐2234☐☐0GST11-2M☐☐☐132C3239.1601.12249143991-153.8
84E84AV☐☐☐2234☐☐0GST14-2M☐☐☐132C3239.1601.82249143991-153.8
90E84AV☐☐☐2234☐☐0GST14-3M☐☐☐132C3240.1851.72273145588-153.7
90E84AV☐☐☐2234☐☐0GST11-3M☐☐☐132C3240.8160.92309147887-153.6
90E84AV☐☐☐2234☐☐0GST14-3M☐☐☐132C3242.5801.72408154183-143.5
90E84AV☐☐☐2234☐☐0GST11-3M☐☐☐132C3244.0000.92489159381-143.4
84E84AV☐☐☐2234☐☐0GST11-2M☐☐☐132C3244.5001.12555163580-143.3
84E84AV☐☐☐2234☐☐0GST14-2M☐☐☐132C3244.5002.02555163580-143.3
90E84AV☐☐☐2234☐☐0GST14-3M☐☐☐132C3248.3861.72737175273-123.1
84E84AV☐☐☐2234☐☐0GST14-2M☐☐☐132C3249.5001.42842181972-123.0
90E84AV☐☐☐2234☐☐0GST11-3M☐☐☐132C3250.0000.92828181071-123.0
90E84AV☐☐☐2234☐☐0GST14-3M☐☐☐132C3253.1481.53006192467-112.8
84E84AV☐☐☐2234☐☐0GST14-2M☐☐☐132C3256.2501.43230206763-112.6
90E84AV☐☐☐2234☐☐0GST14-3M☐☐☐132C3259.3211.53355214760-102.5
90E84AV☐☐☐2234☐☐0GST14-3M☐☐☐132C3269.0421.23905249951-8.72.1
90E84AV☐☐☐2234☐☐0GST14-3M☐☐☐132C3278.4571.24438284045-7.71.9
90E84AV☐☐☐2234☐☐0GST14-3M☐☐☐132C3293.5411.05291338638-6.41.6
90E84AV☐☐☐2234☐☐0GST14-3M☐☐☐132C3296.1571.05439348137-6.21.5
90E84AV☐☐☐2234☐☐0GST14-3M☐☐☐132C32106.2960.96012384833-5.61.4
V00-en_GB-12/20136.4 - 76
GST helical gearboxesTechnical data
6.4
6.4 - 77V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Dimensions
GST☐☐-1M VBR
V00-en_GB-12/20136.4 - 78
GST helical gearboxesTechnical data
6.4
132C32132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
258218194176156139123g195176166157150109100MFEMAXX
g1 187158147137132118107MFEMABR403319324274224.5207187MFEMAXXk1265222180145120k2109.5907668735240MFEMABR
Δ k 115102109128MFFMAXX201.5183170181183165170MFFMABR
k373351331GST04
504454394372352GST05528527477417395375GST06
649557556506446GST07692600599549GST09
p1)o1)h1)a
1381005036GST04
1681156345GST05
2111458056GST06
26418010070GST07
32922212589GST09
s5n1nmf5e5c5b7b5o1i5itul2l1ld2d
k6
9252024801281710555134453518520632M516GST04
11292632991542212570165564322.5628640M620GST05
13.54330371151942716072191685328840450M1025GST06
1857404813724535200802238464338457.560M1030GST07
1856455116129643245105271107844312638.580M1640GST09
k2 !1)
6.4 - 79V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Dimensions
GST☐☐-1M VCR
V00-en_GB-12/20136.4 - 80
GST helical gearboxesTechnical data
6.4
132C32132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
258218194176156139123g195176166157150109100MFEMAXX
g1 187158147137132118107MFEMABR403319324274224.5207187MFEMAXXk1265222180145120k2109.5907668735240MFEMABR
Δ k 115102109128MFFMAXX201.5183170181183165170MFFMABR
k373351331GST04
504454394372352GST05528527477417395375GST06
649557556506446GST07692600599549GST09
p1p1)o1)k8a
411291003536GST04
511561154345GST05
631941454856GST06
822451806070GST07
1013042227489GST09
s1f1e1b1a1o1i1tul2l1ld2d
h7k6
M5x1086148721344318520632M516GST04
M6x1097458881655222.5628640M620GST05
M8x141190701091916428840450M1025GST06
M10x181312010014022377338457.560M1030GST07
M12x20151451201742711004312638.580M1640GST09
k2 !1)
6.4 - 81V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Dimensions
GST☐☐-1M VCK
V00-en_GB-12/20136.4 - 82
GST helical gearboxesTechnical data
6.4
132C32132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42
258218194176156139123g195176166157150109100MFEMAXX
g1 187158147137132118107MFEMABR403319324274224.5207187MFEMAXXk1265222180145120k2109.5907668735240MFEMABR
Δ k 115102109128MFFMAXX201.5183170181183165170MFFMABR
k373351331GST04
504454394372352GST05528527477417395375GST06
649557556506446GST07692600599549GST09
p31)p1o1)k8a
88411003536GST04
105511154345GST05
131631454856GST06
164821806070GST07
2041012227489GST09
s2f2e2c2b2a2o1i2tul2l1ld2d
j7k6
79
33
100115
1010
8095
1201401343218520632M516GST04
93.51301011016079
33
100115
1010
8095
120140
1654022.5628640M620GST0593.513010110160113.516512130200911
3.53.5
130165
1212
110130
160200
1915028840450M1025GST06
1113.5
3.54
165215
1415
130180
200250
22360338457.560M1030GST07
13.513.5
44
215265
1618
180230
250300
271804312638.580M1640GST09
k2 !1)
6.4 - 83V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Dimensions
GST☐☐-2M VBR
V00-en_GB-12/20136.4 - 84
GST helical gearboxesTechnical data
6.4
132C12112C22100C32100C12090C32080C32071C32063C32132C22080C42071C42063C42132C32258218194176156139123g195176166157150109100MFEMAXX
g1 187158147137132118107MFEMABR403319324274224.5207187MFEMAXXk1265222180145120k2109.5907668735240MFEMABR
Δ k 115102109128MFFMAXX201.5183170181183165170MFFMABR
k329GST03
413391371GST04553503443421401GST05
580579529469447427GST06728636635585525GST07791699698648GST09848756755GST11938846GST14
p1)o1)h1)a
10190652GST03
132100800GST04
158.51151001GST05
1981451252GST06
2511801603GST07
3112222004GST09
3852702504GST11
4793283156GST14
s5n1nmf5e5c5b7b5o1i5itul2l1ld2dd
m6k6
6.62084105119160127139
4052
3446
1622.5
56
2028
45
2840
M5M6
1420
GST03
9362024.51121291810576174534322.5628540M620GST04
11492632.51391552312590214665328840450M1025GST05
13.552353815719628160106243796433845660M1030GST06
18664548.51962473420013030210484431263780M1640GST07
1874485423929844245165370127.510553.514808100M1650GST09
228065692803685430020043315512564181008120M2060GST11
2691858534046065380250533200165852212515160M2080GST14
k2 !1)
6.4 - 85V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Dimensions
GST☐☐-2M VCR
V00-en_GB-12/20136.4 - 86
GST helical gearboxesTechnical data
6.4
132C12112C22100C32100C12090C32080C32071C32063C32132C22080C42071C42063C42132C32258218194176156139123g195176166157150109100MFEMAXX
g1 187158147137132118107MFEMABR403319324274224.5207187MFEMAXXk1265222180145120k2109.5907668735240MFEMABR
Δ k 115102109128MFFMAXX201.5183170181183165170MFFMABR
k329GST03
413391371GST04553503443421401GST05
580579529469447427GST06728636635585525GST07791699698648GST09848756755GST11938846GST14
p1p1)o1)a
64100902GST03
771291000GST04
981561151GST05
1211941452GST06
1552451803GST07
1943042224GST09
2433782704GST11
3064703286GST14
s1f1e1b1a1o1i1tul2l1ld2dd
h7m6k6
M5x108614871127139
3951
1622.5
56
2028
45
2840
M5M6
1420
GST03
M5x1086148721745122.5628540M620GST04
M6x1297458882146228840450M1025GST05
M8x141090701092437433845660M1030GST06
M10x181312010014030297431263780M1640GST07
M12x201514512017437012053.514808100M1650GST09
M16x261818515021543314364181008120M2060GST11
M20x3422230195265533187852212515160M2080GST14
k2 !1)
6.4 - 87V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Dimensions
GST☐☐-2M VCK
V00-en_GB-12/20136.4 - 88
GST helical gearboxesTechnical data
6.4
132C12112C22100C32100C12090C32080C32071C32063C32132C22080C42071C42063C42132C32258218194176156139123g195176166157150109100MFEMAXX
g1 187158147137132118107MFEMABR403319324274224.5207187MFEMAXXk1265222180145120k2109.5907668735240MFEMABR
Δ k 115102109128MFFMAXX201.5183170181183165170MFFMABR
k329GST03
413391371GST04553503443421401GST05
580579529469447427GST06728636635585525GST07791699698648GST09848756755GST11938846GST14
p1p1)o1)a
64100902GST03
771291000GST04
981561151GST05
1211941452GST06
1552451803GST07
1943042224GST09
2433782704GST11
3064703286GST14
s2f2e2c2b2a2o1i2tul2l1ld2dd
j7m6k6
79
33
100115
1010
8095
120140
127139
2840
1622.5
56
2028
45
2840
M5M6
1420
GST0393.51301011016079
33
100115
1010
8095
1201401744022.5628540M620GST04
93.51301011016079
33
100115
1010
8095
120140
2145028840450M1025GST0593.513010110160113.516512130200911
3.53.5
130165
1212
110130
160200
2436033845660M1030GST06
1113.5
3.54
165215
1415
130180
200250
30280431263780M1640GST07
13.513.5
44
215265
1618
180230
250300
37010053.514808100M1650GST09
1418
45
265300
1820
230250
300350
43312064181008120M2060GST11
1818
55
300350
2224
250300
350400
533160852212515160M2080GST14
k2 !1)
6.4 - 89V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Dimensions
GST☐☐-3M VBR
080C32071C42071C32063C32080C42063C42156139123g150109100MFEMAXX
g1 132118107MFEMABR224.5207187MFEMAXXk1145120k2735240MFEMABR
Δ k 128MFFMAXX183165170MFFMABR
k497477GST05
563540520GST06630607587GST07711688668GST09787GST11
V00-en_GB-12/20136.4 - 90
GST helical gearboxesTechnical data
6.4
132C12112C22100C32100C12090C32132C22132C32258218194176g195176166157MFEMAXX
g1 187158147137MFEMABR403319324274MFEMAXXk1265222180k2109.5907668MFEMABR
Δ k 115102109128MFFMAXX201.5183170181MFFMABR
k739689GST07
821820770GST09989897896846GST11111310211020970GST14
p1)o1)ha
158.511510035GST05
19814512534GST06
25118016042GST07
31122220052GST09
38527025066GST11
47932831583GST14
s5n1nmf5e5c5b7b5o1i5itul2l1ld2dd
m6k6
11492632.51391552312590208665328840450M1025GST05
13.552353815719628160106240796433845660M1030GST06
18664548.51962473420013030210484431263780M1640GST07
1874485423929844245165370127.510553.514808100M1650GST09
228065692803685430020043315512564181008120M2060GST11
2691858534046065380250533200165852212515160M2080GST14
k2 !1)
6.4 - 91V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Dimensions
GST☐☐-3M VCR
080C32071C42071C32063C32080C42063C42156139123g150109100MFEMAXX
g1 132118107MFEMABR224.5207187MFEMAXXk1145120k2735240MFEMABR
Δ k 128MFFMAXX183165170MFFMABR
k497477GST05
563540520GST06630607587GST07711688668GST09787GST11
V00-en_GB-12/20136.4 - 92
GST helical gearboxesTechnical data
6.4
132C12112C22100C32100C12090C32132C22132C32258218194176g195176166157MFEMAXX
g1 187158147137MFEMABR403319324274MFEMAXXk1265222180k2109.5907668MFEMABR
Δ k 115102109128MFFMAXX201.5183170181MFFMABR
k739689GST07
821820770GST09989897896846GST11111310211020970GST14
p1p1)o1)a
9815611535GST05
12119414534GST06
15524518042GST07
19430422252GST09
24337827066GST11
30647032883GST14
s1f1e1b1a1o1i1tul2l1ld2dd
h7m6k6
M6x1297458882086228840450M1025GST05
M8x141090701092407433845660M1030GST06
M10x181312010014030297431263780M1640GST07
M12x201514512017437012053.514808100M1650GST09
M16x261818515021543314364181008120M2060GST11
M20x3422230195265533187852212515160M2080GST14
k2 !1)
6.4 - 93V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
Dimensions
GST☐☐-3M VCK
080C32071C42071C32063C32080C42063C42156139123g150109100MFEMAXX
g1 132118107MFEMABR224.5207187MFEMAXXk1145120k2735240MFEMABR
Δ k 128MFFMAXX183165170MFFMABR
k497477GST05
563540520GST06630607587GST07711688668GST09787GST11
V00-en_GB-12/20136.4 - 94
GST helical gearboxesTechnical data
6.4
132C12112C22100C32100C12090C32132C22132C32258218194176g195176166157MFEMAXX
g1 187158147137MFEMABR403319324274MFEMAXXk1265222180k2109.5907668MFEMABR
Δ k 115102109128MFFMAXX201.5183170181MFFMABR
k739689GST07
821820770GST09989897896846GST11111310211020970GST14
p1p1)o1)a
9815611535GST05
12119414534GST06
15524518042GST07
19430422252GST09
24337827066GST11
30647032883GST14
s2f2e2c2b2a2o1i2tul2l1ld2dd
j7m6k6
79
33
100115
1010
8095
120140
2085028840450M1025GST0593.513010110160113.516512130200911
3.53.5
130165
1212
110130
160200
2406033845660M1030GST06
1113.5
3.54
165215
1415
130180
200250
30280431263780M1640GST07
13.513.5
44
215265
1618
180230
250300
37010053.514808100M1650GST09
1418
45
265300
1820
230250
300350
43312064181008120M2060GST11
1818
55
300350
2224
250300
350400
533160852212515160M2080GST14
k2 !1)
6.4 - 95V00-en_GB-12/2013
GST helical gearboxesTechnical data
6.4
V00-en_GB-12/20136.4 - 96
GST helical gearboxesTechnical data
6.4
GST☐☐-2/3M VAR
s1i1f1e1b1a1h7
M5x1051.08.0614872GST04
M6x1262.09.0745888GST05
M8x1474.010.09070109GST06
M10x1897.013.0120100140GST07
M12x20120.015.0145120174GST09
M16x26143.018.0185150215GST11
M20x34187.022.0230195265GST14
6.4 - 97V00-en_GB-12/2013
GST helical gearboxesAccessories
6.4
GST☐☐-2/3M VAL
s2i2f2e2c2b2a2j7
M6M8
403.03.0
100115
1010
8095
120140
GST04
M6M850
3.03.0
100115
1010
8095
120140GST05
M83.513010110160M8M10
603.53.5
130165
1212
110130
160200
GST06
M10M12
803.54.0
165215
1415
130180
200250
GST07
M12M12
1004.04.0
215265
1618
180230
250300
GST09
M12M16
1204.05.0
265300
1820
230250
300350
GST11
M16M16
1605.05.0
300350
2224
250300
350400
GST14
V00-en_GB-12/20136.4 - 98
GST helical gearboxesAccessories
6.4
Ventilations
Position of ventilation, sealing elements and oil level check
GST05…09-1
Item 1 standardA ... FMounting positionItem 2 only with:⊗ Ventilation / Oil filler plug
● Oil drain plug • GST05-1M V☐☐ 090C☐☐◒ Oil control plug • GST05-1M V☐☐ 100C☐☐* On both sides • GST06-1M V☐☐ 112C☐☐** On opposite side • GST07-1M V☐☐ 160C☐☐
6.4 - 99V00-en_GB-12/2013
GST helical gearboxesAccessories
6.4
Ventilations
Position of ventilation, sealing elements and oil level check
GST05…14-2
Item 1 standardA ... FMounting positionItem 2 only with:⊗ Ventilation / Oil filler plug
● Oil drain plug • GST05-2M V☐☐ 090C☐☐◒ Oil control plug • GST05-2M V☐☐ 100C☐☐* On both sides • GST06-2M V☐☐ 112C☐☐** On opposite side • GST07-2M V☐☐ 160C☐☐
V00-en_GB-12/20136.4 - 100
GST helical gearboxesAccessories
6.4
Ventilations
Position of ventilation, sealing elements and oil level check
GST05…14-3
Item 1 standardA ... FMounting positionItem 2 only with:⊗ Ventilation / Oil filler plug
● Oil drain plug • GST07-3M V☐☐ 090C☐☐◒ Oil control plug • GST07-3M V☐☐ 100C☐☐* On both sides • GST09-3M V☐☐ 112C☐☐** On opposite side
6.4 - 101V00-en_GB-12/2013
GST helical gearboxesAccessories
6.4
Ventilations
Compensation reservoir for mounting position C
GST☐☐-2
160132112090Motor180100225
o6o5o6o5o6o5o6o5[mm][mm][mm][mm][mm][mm][mm][mm]
477260477245477226477206GST09
540268540254540230536208GST11
640282640282640252GST14
ƒ Terminal box position 4 not permitted.
V00-en_GB-12/20136.4 - 102
GST helical gearboxesAccessories
6.4
6.4 - 103V00-en_GB-12/2013
GST helical gearboxesAccessories
6.4
V00-en_GB-12/20136.4 - 104
GST helical gearboxesAccessories
6.4
GFL shaft-mountedhelical gearboxes0.55 to 22 kW
Gearboxes
6.6 - 4List of abbreviationsGeneral information
6.6 - 5Product key
6.6 - 7Product information
6.6 - 8Functions and features
6.6 - 13Dimensioning
6.6 - 18Notes on ordering
6.6 - 19Ordering details checklist
6.6 - 23Permissible radial and axial forces at outputTechnical data
6.6 - 27Output backlash in angular minutes
6.6 - 28Moments of inertia
6.6 - 33Weights
6.6 - 45Selection tables
6.6 - 74Dimensions
6.6 - 91Hollow shaft with shrink discAccessories
6.6 - 93Mounting set for hollow shaft circlip: Proposed design forauxiliary tools
6.6 - 94Foot mounting in position 3
6.6 - 95Foot mounting in position 4
6.6 - 96Rubber buffer for torque plate
6.6 - 97Ventilations
GFL shaft-mounted helical gearboxesContents
6.6
List of abbreviations
Communauté EuropéenneCEEfficiencyηc=1Canadian Standards AssociationCSALoad capacitycDeutsches Institut für Normung e.V.DINRated frequency[Hz]fNElectromagnetic compatibilityEMCMax. axial force[N]Fax,maxEuropean standardENMax. radial force[N]Frad,maxInternational Electrotechnical CommissionIECSite altitude[m]HmaxInternational Mounting CodeIMRatioiInternational Protection CodeIPMoment of inertia[kgcm²]JNational Electrical Manufacturers AssociationNEMAMass[kg]mUnderwriters Laboratory Listed ProductULOutput torque[Nm]M2Underwriters Laboratory Recognized ProductUROutput speed[r/min]n2Verband deutscher Elektrotechniker (Associationof German Electrical Engineers)
VDERated speed[r/min]nNRated power[kW]PN
China Compulsory CertificateCCCTransition operating frequency[1/h]ShüCertificate for Russian FederationGOSTMax. ambient operating temperature[°C]Topr,maxCombined certification marks of UL for the USAand Canada
cURusMin. ambient operating temperature[°C]Topr,minRated voltage[V]UN, Δ
Certificate for UkraineUkrSEPRORated voltage[V]UN, Y
Lenze | V02-en_GB-03/20146.6 - 4
GFL shaft-mounted helical gearboxesGeneral information
6.6
Product key
6.6 - 5Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesGeneral information
6.6
Product key
Mounting position (A to F) and position of system blocks (1 to 6)
Without foot: 0Hollow shaft: 0Foot: 3, 4Solid shaft: 6Terminal box / motec: 2, 3, 4, 5Hollow shaft with shrink disc: 1, 6
Gearbox designs
OptionsBasic versions
Standard efficiencyMotor efficiency OKS-S (special paint according to RAL)Surface and corrosionprotection OKS-M (special paint according to RAL)Increased efficiency (IE2)
OKS-L (special paint according to RAL)OKS-G (primer: grey)OKS-S (paint: RAL 7012)
Surface and corrosionprotection CLP HC 320 (synthetic)
CLP HC 220 USDA H1 (synthetic)Lubricant
CLP 460 (mineral)LubricantDriven shaft: VitonShaft sealing ringsOil control plugs for GFL05 to 14VentilationBreather elements for GFL05VentilationBreather elements for GFL06 … 14Compensation reservoir for GFL09 to 14-2in mounting position C
Rubber buffer for torque plateAccessoriesShrink disc coverMounting set for hollow shaft circlip
Metal nameplate (supplied loose)NameplateAdhesive nameplate (supplied loose)
Lenze | V02-en_GB-03/20146.6 - 6
GFL shaft-mounted helical gearboxesGeneral information
6.6
Product information
DesignsLenze provides a geared motor construction kit, which covers a widerangeof requirements. Numerous drive-side andoutput-side optionsenable precise adaptationof thedrive to the specific application. This • 2-stage and 3-stage gearboxesis the basis for versatile applications and functional scalability of ourgearboxes and geared motors.
• Hollow shaft with keyway or shrink disc• Solid shaft with keyway
The modular concept and high power density make extremely com-pact sizespossible.Optimised teethprofiles andgroundgears ensure
• Foot or flange mounting• Torque plate, including rubber buffer
low-noise operation and lowbacklash. The gearboxes are of compactand hence space-saving construction.
• With MF three-phase AC motors (inverter-optimised)power range 0.55 … 22 kW
Compact and powerful
In combination with three-phase AC motors, our shaft-mountedhelical gearboxes form a compact and effective drive unit. The lowlevel of backlash of the gear teeth ensures highest precision. In addi-tion, they can also distribute the power output and torque via anoutput shaft on both sides. The gearboxes are available in 2- and 3-stage versions with a torque of up to 11,615 Nm and a ratio of up toi=856.
Inverters for motor-proximity installation
The Drive Package with decentralised Inverter Drives 8400 moteccovers a power range up to 7.5 kW.
Shaft-mounted helical geared motor GFL07-2M HCR 100-32
6.6 - 7Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesGeneral information
6.6
Functions and features
Gearbox type
GFLHousing
CuboidDesign
Aluminium / cast ironMaterialSolid shaft
with keyway to DIN 6885Design
k6 (d ≤ 50 mm)Tolerancem6 (d > 50 mm)
Tempered steel C45 or 42CrMo4MaterialHollow shaft
H: with keywayDesignS: smooth
Bore H7Tolerance
Tempered steel C45MaterialToothed part
Ground tooth flanksDesignOptimised tooth flank geometry
Case-hardened steelMaterialShaft-hub joint
1st stage/prestage/helical (bevel) gearbox: Friction-type connectionOutput stage (= 2nd, 3rd or 4th stage): Friction-type or positive-fit connection
Shaft sealing rings
With dust lipDesign
NB / FPMaterialBearing
Ball bearing / tapered-roller bearing depending on size and designDesignSchmierstoffe
DIN 51502Standard
corresponding to mounting position (see operating instructions)QuantitiesMechanical efficiency
1-stage gearboxes [ηc=1]0.972-stage gearboxes [ηc=1]0.953-stage gearboxes [ηc=1]
4-stage gearboxes [ηc=1]Notes
Lenze | V02-en_GB-03/20146.6 - 8
GFL shaft-mounted helical gearboxesGeneral information
6.6
Functions and features
Lubricants
Lenze gearboxes and gearedmotors are ready for operation on deliv-ery and are filled with lubricants specific to both the drive and thedesign. The mounting position and design specified in the order arekey factors in choosing the volume of lubricant.
The lubricants listed in the lubricant table are approved for use inLenze drives.
Lubricant table
Mode
CLP HC 220CLP HC 320CLP 460USDA H1-20 … +40-25 … +500 … +40Ambient temperature [°C]
Synthetic-based oil (synthetic hydrocarbon / poly-alpha-olefin oil)Mineral based oil with additivesSpecificationFor food processing industryNote
16000 operating hours25000 operating hours16000 operating hoursChanging intervalnot later than after three years (oil
temperature 70 to 80 °C)not later than after three years (oil
temperature 70 to 80 °C)not later than after three years (oil
temperature 70 to 80 °C)bremer & leguilFuchs RenolinFuchs RenolinFuchs
Cassida Fluid GL 220Unisyn CLP 320CLP 460KlüberoilKlübersynthKlüberoilKlüber
4 UH1-220 NGEM4-320 NGEM1-460 NShell OmalaShell OmalaShellS4 GX HD 320S2 G 460
ƒ Please contact your Lenze sales office if you are operating atambient temperatures in areas up to< -20 °C bzw. > or up to+40°C.
6.6 - 9Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesGeneral information
6.6
Functions and features
Surface and corrosion protection
Various surface coatings combined with other protective measuresensure that the geared motors operate reliably even at high air hu-
Foroptimumprotectionofgearedmotors against ambient conditions,the surface and corrosion protection system (OKS) offers tailor-madesolutions. midity, in outdoor installations or in the presence of atmospheric
impurities. Any colour from the RAL Classic collection can be chosenfor the top coat. The geared motors are also available unpainted (nosurface and corrosion protection).
MeasuresApplicationsSurface and corrosion protec-tion system
Catalogue textCatalogue text
OKS-G(primed)
•
•
2K PUR priming coat (grey)
Dependent on subsequenttop coat applied
• Zinc-coated screws• Rust-free breather elementsOptional measures• Stainless steel nameplate
OKS-S(small)
••
Surface coating as per corrosivity category C1 (in line with EN 12944-2)Standard applications
• Internal installation inheatedbuildings
• Zinc-coated screws
••
Air humidity up to 90%Rust-free breather elements
Optional measures• Stainless steel nameplate
OKS-M(medium)
•
•
Surface coating as per corrosivity category C2 (in line with EN 12944-2)
Internal installation in non-heated buildings
•
•
Zinc-coated screws
Covered, protected externalinstallation
• Rust-free breather elementsOptional measures
• Air humidity up to 95%• Stainless steel shaft• Stainless steel nameplate• Rust-free shrink disc (on request)
OKS-L(high)
•
•
Surface coating as per corrosivity category C3 (in line with EN 12944-2)
External installation• Air humidity above 95%
•
•
Blower cover and B end shield additionally primed
Chemical industry plants•
•
Food industry
Cable glands with gaskets• Corrosion-resistant brake with cover ring, stainless friction plate, andchrome-plated armature plate (on request)
• All screws/screw plugs zinc-coated• Stainless breather elements• Threaded holes that are not used are closed by means of plastic plugsOptional measures• Sealed recesses on motor (on request)• Stainless steel shaft• Stainless steel nameplate• Rust-free shrink disc (on request)• Additional priming coat on cast iron fan• Oil expansion tank and torque plates painted separately and suppliedloose
Lenze | V02-en_GB-03/20146.6 - 10
GFL shaft-mounted helical gearboxesGeneral information
6.6
Functions and features
Structure of surface coating
ColourSurface coatingCorrosivity categorySurface and corrosion protec-tion system
StructureDIN EN ISO 12944-2
Dipping primed gearboxWithout OKS(uncoated)
Dipping primed gearbox2K PUR priming coat
OKS-G(primed)
Standard: RAL 7012Optional: RAL Classic
Dipping primed gearbox2K-PUR top coat
C1OKS-S(small)
Standard: RAL 7012Optional: RAL Classic
Dipping primed gearbox2K PUR priming coatC2
OKS-M(medium)
2K-PUR top coat
Standard: RAL 7012Optional: RAL Classic
Dipping primed gearbox2K PUR priming coatC3
OKS-L(high)
2K-PUR top coat
6.6 - 11Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesGeneral information
6.6
Functions and features
Ventilation
Non-ventilated gearboxesNo ventilation is required for the GFL04 gearbox.
Gearboxes that may optionally be equipped with ventilationSpecial measures are not usually required when using the GFL05gearbox. In borderline cases, e.g. at input speeds > 2000 rpm, we re-commend the use of breather elements, which we can supply if re-quired.
Ventilated gearboxesThe gearboxes GFL06 to 14 are supplied with breather elements asstandard.
Special measures for mounting position C (motor on top)We recommend that an oil compensation reservoir is always usedwith gearbox sizes G☐☐09 to 14 in this mounting position. Thisreservoir can be purchased as an option. For illustrations and meas-ures, please refer to the Accessories chapter.
This is not required at higher ratios or low input speeds. Please contactLenze for confirmation in this case.
Lenze | V02-en_GB-03/20146.6 - 12
GFL shaft-mounted helical gearboxesGeneral information
6.6
Dimensioning
General information about the data provided in this catalogue
Powers, torques and speedsThe powers, torques and speeds specified in this catalogue are roun-ded values and are valid under the following conditions:• Operating time/day = 8 h (100% OT)• Duty class I for up to 10 switching operations/h• Mounting positions and designs in this catalogue• Standard lubricant• Tamb = 20 °C for gearboxes,Tamb = 40 °C for motors (in accordance with EN 60034)
• Site altitude < = 1000 m amsl• The selection tables provide the permissible mechanical powersand torques. For notes on the thermal power limit, see chapterdrive dimensioning.
• The rated power specified for motors and geared motors appliesto operating mode S1 (in accordance with EN 60034).
Under different operating conditions, the values obtained may varyfrom those listed here.In the case of extreme operating conditions, please consult yourLenze sales office.
6.6 - 13Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesGeneral information
6.6
Dimensioning
Thermal power limit
The thermal power limit is affected by:The thermal power limit, defined by the heat balance, limits the per-missible gearbox continuous power. It may be less than themechan-ical power ratings listed in the selection tables.
• the churning losses in the lubricant. These are determined by themounting position and the circumferential speed of the wheels
• the load and the speed• the ambient conditions: temperature, air circulation, input or dis-sipation via shafts and the foundation
Please consult your Lenze sales office• if the following input speeds n 1 are exceeded on a continuousbasis (continuous is defined as more than 8 h/day):
Mounting position C, DMounting position A, B, E, FMotor frame size
3000 r/min3000 r/min063 ... 100
1500 r/min3000 r/min112 ... 132
1500 r/min2000 r/min160 ... 225
• if the following input speeds n 1 are exceeded:
Mounting position C, DMounting position A, B, E, FMotor frame size
3000 r/min4000 r/min063 ... 100
2000 r/min4000 r/min112 ... 132
1500 r/min3000 r/min160 ... 225
• or if you are using the following gearbox type, size and ratio com-binations at an input speed of n 1 > 1500 r/min:
Ratio iGearbox sizeGearbox type
≤ 1607, 09, 11, 14GFL shaft-mounted helical gearbox
Possible ways of extending the application area
• synthetic lubricant (option)• shaft sealing rings made from FP material/Viton (option)• reduction in lubricant quantity• cooling of the geared motor by means of air convection on themachine/system
Lenze | V02-en_GB-03/20146.6 - 14
GFL shaft-mounted helical gearboxesGeneral information
6.6
Dimensioning
Load capacity and application factor
Application factor k (according to DIN 3990)Load capacity c of gearboxTakes into account the influence of temporally variable loads whichare actually present during the anticipated operating time of gear-boxes and geared motors.
Rated value for the load capacity of Lenze geared motors.• c is the ratio of the permissible rated torque of the gearbox to therated torque supplied by the drive component (e.g. the built-inLenze motor). k is determined by:
• The value of cmust always be greater than the value of the applic-ation factor k calculated for the application.
• the type of load• the load intensity• temporal influences
Load typeDuty class
Smooth operation, small or light joltsI
Uneven operation, average joltsII
Uneven operation, severe jolts and/or alternating loadIII
Application factor k
6.6 - 15Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesGeneral information
6.6
Dimensioning
Torque derating at lowmotor frequencies
Motor size-dependent torque reduction, taking into account thethermal response during operation on the inverter.
Torque characteristics
A = Operation with integral fan and brakeB = Operation with integral fan and brake control "Holding currentreduction"
ƒ Themotor specifications stated in this catalogue for inverter op-eration apply to operationwith a Lenze inverter. If you are uncer-tain, get in touch with the manufacturer of the inverter to askwhether thedevice is capableof driving themotorwith the statedspecifications (e.g. setting range, base frequency).
You can use the Drive Solution Designer for precise drive dimension-ing.
The Drive Solution Designer helps you to carry out a fast and high-quality drive dimensioning.The software includes well-founded and proven knowledge on driveapplications and electro-mechanical drive components.
Please contact your Lenze sales office.
Lenze | V02-en_GB-03/20146.6 - 16
GFL shaft-mounted helical gearboxesGeneral information
6.6
Dimensioning
Notes on the selection tables
The selection tables show the available combinations of gearboxtype, number of stages, ratio andmotor. They are usedonly to providebasic orientation.The following legend indicates the structure of the selection tables.
6.6 - 17Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesGeneral information
6.6
Notes on ordering
Wewant to be sure that you receive the correct products in goodtime.
To allow us to achieve this we need:• your address and your company data• our product key for the individual products in this catalogue• your delivery date and delivery address
Ordering procedurePlease use the ordering information checklist to ensure that youprovide all the ordering information required for the various products.
Theordering information checklist, theproduct key, thebasic versions,options, mounting position and position of the system blocks will befound in the General – Product key section.
A list of Lenze's worldwide sales offices can be found on the Internet:www.Lenze.com.
Lenze | V02-en_GB-03/20146.6 - 18
GFL shaft-mounted helical gearboxesGeneral information
6.6
Ordering details checklist
6.6 - 19Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesGeneral information
6.6
Ordering details checklist
Lenze | V02-en_GB-03/20146.6 - 20
GFL shaft-mounted helical gearboxesGeneral information
6.6
Ordering details checklist
Three-phase AC motors options
6.6 - 21Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesGeneral information
6.6
Ordering details checklist
Three-phase AC motors options
Lenze | V02-en_GB-03/20146.6 - 22
GFL shaft-mounted helical gearboxesGeneral information
6.6
Permissible radial and axial forces at output
Permissible axial forcePermissible radial forceFax,per = Fax,max if Frad = 0Frad,per = min(fw x fα x Frad,max ; fw x Frad,max at n2 ≤ 16 r/min)
If Frad and Fax ≠ 0, please contact your Lenze sales office.
Application of forces
Effective direction factor fα at output shaft
——— Direction of rotation R——— Direction of rotation L
6.6 - 23Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Permissible radial and axial forces at output
Additional load factor fw at output shaft
— ּ — Hollow shaft (H☐☐)——— Solid shaft (V☐☐)——— Solid shaft with flange (V☐K)
GFL☐☐-2/3☐ H☐☐
n2 [r/min]Size
≤162540631001602504006301000Gearbox
Max. radial force, Hollow shaft
Frad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,max
[N][N][N][N][N][N][N][N][N][N]
7000700063005500460038003200280027002100GFL04
8000800071006000500041003400300024001800GFL05
1200012000108008500660050004700430033002400GFL06
1600015000115009300790064005100450034002200GFL07
2400022000150001300010500720060005000GFL09
30000270002300019000142001000087007300GFL11
4500030000180001400011500950090008000GFL14
Max. axial force, Hollow shaft
Fax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,max
[N][N][N][N][N][N][N][N][N][N]
5500550055005300420032002600220017001300GFL04
6600660066006600590042003600280022001600GFL05
10000100001000010000850060005200400032002400GFL06
14000140001400012000850060004700340027002000GFL07
2100021000170001350010000580042003100GFL09
2700027000250001900014000750060004700GFL11
350003100017500110007500620050004000GFL14
ƒ Application of force Frad: at hollow shaft end face (x = 0)ƒ Fax,max only valid with Frad = 0ƒ Neither radial nor axial forces are permissible for thehollow shaft
with shrink disc (S☐☐).
Lenze | V02-en_GB-03/20146.6 - 24
GFL shaft-mounted helical gearboxesTechnical data
6.6
Permissible radial and axial forces at output
GFL☐☐-2/3☐ V☐R
n2 [r/min]Size
≤162540631001602504006301000Gearbox
Max. radial force, Solid shaft without flange
Frad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,max
[N][N][N][N][N][N][N][N][N][N]
3600360036003600360032002700230021001650GFL04
6200620058004800400032002700240019001400GFL05
9000900084006500510039003600320025001850GFL06
9000900084006500510039003600320026001650GFL07
180001800012000100008000550044003800GFL09 1)
2300020500174001450011200730063005500GFL11 1)
6500065000650006500065000620005400047000GFL14
Max. axial force, Solid shaft without flange
Fax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,max
[N][N][N][N][N][N][N][N][N][N]
5500550055005300420032002600220017001300GFL04
6600660066006600590042003600280022001600GFL05
10000100001000010000850060005200400032002400GFL06
14000140001400012000850060004700340027002000GFL07
2100021000170001350010000580042003100GFL09 1)
2700027000250001900014000750060004700GFL11 1)
3500035000350003500032000290002700025000GFL14
Reinforced output shaft bearings are available on request for V☐R versions.1)
ƒ Application of force Frad: centre of shaft journal (x = l/2)ƒ Fax,max only valid with Frad = 0
6.6 - 25Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Permissible radial and axial forces at output
GFL☐☐-2/3☐ V☐K
n2 [r/min]Size
≤162540631001602504006301000Gearbox
Max. radial force, Solid shaft with flange
Frad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,maxFrad,max
[N][N][N][N][N][N][N][N][N][N]
4600460046004600460044003700320028002300GFL04
7000700070007000680059005100430037002900GFL05
10000100001000010000960078007000610050004000GFL06
140001400013000120001050089007400640052004000GFL07
15000150001500015000140001050090007800GFL09
3000030000300002600021500170001450012500GFL11
4300043000380003200027500230002000018000GFL14
Max. axial force, Solid shaft with flange
Fax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,maxFax,max
[N][N][N][N][N][N][N][N][N][N]
4400440044004400420032002600220017001300GFL04
6600660066006600640048003900310024001800GFL05
10000100001000010000850065005500430034002500GFL06
11500115001150011500950070006500610048003600GFL07
115001150011500115009500700065006100GFL09
27000270002700022000170001050085006800GFL11
35000350002600019000130001000080006000GFL14
ƒ Application of force Frad: centre of shaft journal (x = l/2)ƒ Fax,max only valid with Frad = 0
Lenze | V02-en_GB-03/20146.6 - 26
GFL shaft-mounted helical gearboxesTechnical data
6.6
Output backlash in angular minutes
ƒ Backlash ϕ depending on ratio i
GFL04 to 14-2
GFL05 to 14-3
6.6 - 27Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Moments of inertia
GFL☐☐-2
ƒ Moment of inertia (J) depending on ratio i
GFL05GearboxGFL04Gearbox1.510[kgcm²]J3.659 1.677[kgcm²]J3.333
2.133[kgcm²]J4.5710.858[kgcm²]J5.0180.925[kgcm²]J5.833 2.372[kgcm²]J5.133
2.329[kgcm²]J5.6670.555[kgcm²]J6.4220.473[kgcm²]J7.025 0.822[kgcm²]J6.400
1.470[kgcm²]J7.0400.666[kgcm²]J8.3790.613[kgcm²]J9.333 1.450[kgcm²]J7.771
0.951[kgcm²]J9.0100.366[kgcm²]J10.2380.410[kgcm²]J11.491 0.885[kgcm²]J9.946
1.082[kgcm²]J11.3600.382[kgcm²]J12.8000.282[kgcm²]J14.706 1.012[kgcm²]J12.800
0.746[kgcm²]J14.5380.245[kgcm²]J16.0870.230[kgcm²]J17.920 0.603[kgcm²]J15.904
0.609[kgcm²]J17.9200.171[kgcm²]J20.5190.163[kgcm²]J22.857 0.428[kgcm²]J20.286
0.434[kgcm²]J22.8570.129[kgcm²]J25.1360.123[kgcm²]J28.000 0.345[kgcm²]J24.850
0.331[kgcm²]J28.0000.086[kgcm²]J31.6000.082[kgcm²]J35.200 0.204[kgcm²]J32.344
0.195[kgcm²]J36.4440.058[kgcm²]J40.6970.056[kgcm²]J45.333 0.148[kgcm²]J40.233
0.142[kgcm²]J45.3330.038[kgcm²]J51.5790.037[kgcm²]J57.455 0.093[kgcm²]J52.067
0.090[kgcm²]J58.6670.026[kgcm²]J64.6360.025[kgcm²]J72.000 0.068[kgcm²]J63.190
0.064[kgcm²]J71.2000.016[kgcm²]J85.1560.015[kgcm²]J94.857 0.043[kgcm²]J80.763
0.042[kgcm²]J91.000
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
Lenze | V02-en_GB-03/20146.6 - 28
GFL shaft-mounted helical gearboxesTechnical data
6.6
Moments of inertia
GFL☐☐-2
ƒ Moment of inertia (J) depending on ratio i
GFL07GearboxGFL06Gearbox7.755[kgcm²]J3.675 19.570[kgcm²]J3.350
11.988[kgcm²]J4.6436.636[kgcm²]J5.2116.044[kgcm²]J5.750 11.120[kgcm²]J5.159
18.094[kgcm²]J5.6953.651[kgcm²]J6.4504.044[kgcm²]J7.147 9.831[kgcm²]J6.400
11.878[kgcm²]J7.1504.264[kgcm²]J8.4003.879[kgcm²]J9.463 13.113[kgcm²]J8.324
12.037[kgcm²]J9.3792.520[kgcm²]J10.0921.730[kgcm²]J11.520 8.030[kgcm²]J9.714
8.520[kgcm²]J11.5382.610[kgcm²]J12.9781.950[kgcm²]J14.743 7.970[kgcm²]J13.000
6.350[kgcm²]J14.2001.680[kgcm²]J16.1281.570[kgcm²]J18.169 5.270[kgcm²]J15.904
4.980[kgcm²]J17.9201.190[kgcm²]J20.5711.130[kgcm²]J23.175 3.470[kgcm²]J20.286
3.268[kgcm²]J22.8570.904[kgcm²]J25.2000.861[kgcm²]J28.389 2.645[kgcm²]J24.850
2.525[kgcm²]J28.0000.581[kgcm²]J32.8000.556[kgcm²]J36.951 1.690[kgcm²]J32.344
1.610[kgcm²]J36.4440.425[kgcm²]J40.8000.407[kgcm²]J45.963 1.250[kgcm²]J39.642
1.200[kgcm²]J44.6670.264[kgcm²]J52.8000.251[kgcm²]J59.481 0.783[kgcm²]J52.067
0.753[kgcm²]J58.6670.193[kgcm²]J64.0800.187[kgcm²]J72.189 0.573[kgcm²]J63.190
0.555[kgcm²]J71.2000.125[kgcm²]J81.0000.121[kgcm²]J91.250 0.366[kgcm²]J79.875
0.358[kgcm²]J90.000
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
6.6 - 29Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Moments of inertia
GFL☐☐-2
ƒ Moment of inertia (J) depending on ratio i
GFL11GearboxGFL09Gearbox41.300[kgcm²]J6.864 124.000[kgcm²]J6.864
116.000[kgcm²]J7.46638.700[kgcm²]J7.46626.800[kgcm²]J9.010 79.600[kgcm²]J9.010
74.800[kgcm²]J9.79925.300[kgcm²]J9.79919.500[kgcm²]J11.167 65.000[kgcm²]J10.720
81.500[kgcm²]J12.48027.600[kgcm²]J12.30720.000[kgcm²]J14.333 58.400[kgcm²]J14.538
51.300[kgcm²]J15.90415.500[kgcm²]J16.33314.600[kgcm²]J18.407 48.300[kgcm²]J17.920
36.100[kgcm²]J20.28612.100[kgcm²]J19.66711.300[kgcm²]J22.164 34.300[kgcm²]J22.857
26.900[kgcm²]J24.8509.040[kgcm²]J24.1118.630[kgcm²]J27.173 25.700[kgcm²]J28.000
17.100[kgcm²]J32.7395.430[kgcm²]J32.6675.210[kgcm²]J36.815 16.500[kgcm²]J36.889
12.600[kgcm²]J40.2334.070[kgcm²]J39.6673.920[kgcm²]J44.704 12.200[kgcm²]J45.333
8.080[kgcm²]J52.0672.590[kgcm²]J51.3332.500[kgcm²]J57.852 7.810[kgcm²]J58.667
5.900[kgcm²]J63.1901.890[kgcm²]J62.3001.830[kgcm²]J70.211 5.720[kgcm²]J71.200
3.870[kgcm²]J79.8751.250[kgcm²]J78.7501.210[kgcm²]J88.750 3.760[kgcm²]J90.000
GFL14Gearbox344.000[kgcm²]J7.150321.000[kgcm²]J7.777247.000[kgcm²]J8.800232.000[kgcm²]J9.571242.000[kgcm²]J11.538225.000[kgcm²]J13.000625.000[kgcm²]J14.200156.000[kgcm²]J15.620146.000[kgcm²]J17.600111.000[kgcm²]J19.948105.000[kgcm²]J22.47683.200[kgcm²]J24.45679.400[kgcm²]J27.55652.900[kgcm²]J32.34450.700[kgcm²]J36.44438.000[kgcm²]J39.64236.600[kgcm²]J44.66724.600[kgcm²]J52.06723.800[kgcm²]J58.66718.000[kgcm²]J63.19017.400[kgcm²]J71.20011.800[kgcm²]J79.87511.500[kgcm²]J90.000
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
Lenze | V02-en_GB-03/20146.6 - 30
GFL shaft-mounted helical gearboxesTechnical data
6.6
Moments of inertia
GFL☐☐-3
ƒ Moment of inertia (J) depending on ratio i
GFL06GearboxGFL05Gearbox0.202[kgcm²]J61.653 0.292[kgcm²]J66.213
0.264[kgcm²]J72.0000.145[kgcm²]J78.6390.197[kgcm²]J90.123 0.259[kgcm²]J81.111
0.190[kgcm²]J88.2000.196[kgcm²]J101.5470.142[kgcm²]J114.952 0.187[kgcm²]J99.361
0.091[kgcm²]J116.5710.141[kgcm²]J129.5240.109[kgcm²]J140.817 0.208[kgcm²]J131.323
0.110[kgcm²]J144.3200.109[kgcm²]J158.6670.073[kgcm²]J177.027 0.109[kgcm²]J162.583
0.102[kgcm²]J179.5200.073[kgcm²]J199.4670.051[kgcm²]J227.989 0.101[kgcm²]J202.237
0.068[kgcm²]J231.2000.050[kgcm²]J256.8890.033[kgcm²]J288.948 0.067[kgcm²]J260.457
0.044[kgcm²]J293.0180.033[kgcm²]J325.5760.023[kgcm²]J362.100 0.064[kgcm²]J299.200
0.030[kgcm²]J367.2000.023[kgcm²]J408.0000.014[kgcm²]J477.052 0.030[kgcm²]J413.667
0.029[kgcm²]J475.2000.014[kgcm²]J537.5240.028[kgcm²]J535.3330.028[kgcm²]J576.7200.028[kgcm²]J649.7000.017[kgcm²]J759.8060.017[kgcm²]J855.954
GFL09GearboxGFL07Gearbox0.790[kgcm²]J65.306 2.344[kgcm²]J63.326
2.472[kgcm²]J73.1730.894[kgcm²]J72.4520.880[kgcm²]J81.636 2.428[kgcm²]J82.465
1.679[kgcm²]J93.3330.609[kgcm²]J92.4130.601[kgcm²]J104.127 1.651[kgcm²]J105.185
1.230[kgcm²]J114.3330.448[kgcm²]J113.2060.442[kgcm²]J127.556 1.212[kgcm²]J128.852
0.773[kgcm²]J148.8150.275[kgcm²]J147.3470.271[kgcm²]J166.025 0.762[kgcm²]J167.712
0.548[kgcm²]J185.1110.194[kgcm²]J183.2850.192[kgcm²]J206.519 0.541[kgcm²]J208.617
0.505[kgcm²]J224.7780.180[kgcm²]J224.6360.179[kgcm²]J253.111 0.500[kgcm²]J253.321
0.313[kgcm²]J290.8890.112[kgcm²]J290.7060.111[kgcm²]J327.556 0.310[kgcm²]J327.827
0.226[kgcm²]J353.0330.081[kgcm²]J352.8110.080[kgcm²]J397.533 0.224[kgcm²]J397.863
0.286[kgcm²]J424.2470.104[kgcm²]J430.2220.075[kgcm²]J522.133 0.208[kgcm²]J514.881
0.201[kgcm²]J554.4700.073[kgcm²]J562.3910.073[kgcm²]J633.680 0.200[kgcm²]J624.879
0.130[kgcm²]J700.8750.047[kgcm²]J718.7860.046[kgcm²]J809.900 0.129[kgcm²]J789.875
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
6.6 - 31Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Moments of inertia
GFL☐☐-3
ƒ Moment of inertia (J) depending on ratio i
GFL14GearboxGFL11Gearbox6.967[kgcm²]J65.306 26.316[kgcm²]J64.296
19.862[kgcm²]J68.7087.844[kgcm²]J73.3357.707[kgcm²]J82.631 19.381[kgcm²]J77.418
21.590[kgcm²]J85.0375.050[kgcm²]J93.5404.965[kgcm²]J105.397 9.324[kgcm²]J104.889
8.318[kgcm²]J114.1263.712[kgcm²]J114.5863.656[kgcm²]J129.111 8.144[kgcm²]J128.593
16.779[kgcm²]J136.8892.299[kgcm²]J149.1442.265[kgcm²]J168.049 5.917[kgcm²]J156.148
6.962[kgcm²]J170.0741.661[kgcm²]J182.7921.639[kgcm²]J205.963 3.692[kgcm²]J202.074
4.742[kgcm²]J224.6361.515[kgcm²]J224.6361.501[kgcm²]J253.111 4.697[kgcm²]J253.111
5.759[kgcm²]J273.7781.865[kgcm²]J267.2591.373[kgcm²]J327.556 4.300[kgcm²]J332.444
2.163[kgcm²]J352.8110.679[kgcm²]J358.0770.673[kgcm²]J403.467 2.145[kgcm²]J397.533
2.727[kgcm²]J430.2220.853[kgcm²]J430.2220.623[kgcm²]J522.133 1.984[kgcm²]J522.133
1.910[kgcm²]J562.3910.599[kgcm²]J562.3910.596[kgcm²]J633.680 1.903[kgcm²]J633.680
1.259[kgcm²]J710.8880.385[kgcm²]J710.8880.384[kgcm²]J801.000 1.254[kgcm²]J801.000
ƒ The moments of inertia relate to the drive shaft of the gearbox.ƒ The totalmoment of inertia is calculated by adding the values of
the gearbox, motor and accessories.
Lenze | V02-en_GB-03/20146.6 - 32
GFL shaft-mounted helical gearboxesTechnical data
6.6
Weights
GFL☐☐-2M HAR / HBR
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42132C32
191412[kg]mGFL044940322825[kg]mGFL05
776456474341[kg]mGFL06134104918375[kg]mGFL07184153141132[kg]mGFL09274245233[kg]mGFL11424396[kg]mGFL14
GFL☐☐-2M HCR / HDR
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42132C32
181311[kg]mGFL044739312624[kg]mGFL05
746253454038[kg]mGFL06130100877971[kg]mGFL07177146134125[kg]mGFL09260231219[kg]mGFL11401373[kg]mGFL14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
6.6 - 33Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Weights
GFL☐☐-2M HAK
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42132C32
221614[kg]mGFL045344363229[kg]mGFL05
847163545048[kg]mGFL061451151029486[kg]mGFL07200169157148[kg]mGFL09298269257[kg]mGFL11457429[kg]mGFL14
GFL☐☐-2M HCK
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42132C32
211513[kg]mGFL045143353028[kg]mGFL05
816960524745[kg]mGFL06141111989082[kg]mGFL07193162150141[kg]mGFL09284255243[kg]mGFL11434406[kg]mGFL14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
Lenze | V02-en_GB-03/20146.6 - 34
GFL shaft-mounted helical gearboxesTechnical data
6.6
Weights
GFL☐☐-2M VAR / VBR
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42132C32
27201512[kg]mGFL045041332926[kg]mGFL05
796758504543[kg]mGFL06139109968880[kg]mGFL07192161149140[kg]mGFL09290261249[kg]mGFL11457429[kg]mGFL14
GFL☐☐-2M VCR / VDR
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42132C32
26191411[kg]mGFL044840322725[kg]mGFL05
776456474341[kg]mGFL06135105928476[kg]mGFL07185154142133[kg]mGFL09276247235[kg]mGFL11434406[kg]mGFL14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
6.6 - 35Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Weights
GFL☐☐-2M VAK
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42132C32
30221715[kg]mGFL045445373330[kg]mGFL05
867465575250[kg]mGFL061501201079991[kg]mGFL07208177165156[kg]mGFL09314285273[kg]mGFL11490462[kg]mGFL14
GFL☐☐-2M VCK
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42132C32
29211614[kg]mGFL045244363129[kg]mGFL05
847163545048[kg]mGFL061461161039587[kg]mGFL07201170158149[kg]mGFL09300271259[kg]mGFL11467439[kg]mGFL14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
Lenze | V02-en_GB-03/20146.6 - 36
GFL shaft-mounted helical gearboxesTechnical data
6.6
Weights
GFL☐☐-2M SAR / SBR
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42132C32
27201512[kg]mGFL045041332926[kg]mGFL05
786557484442[kg]mGFL06135106938476[kg]mGFL07187156144135[kg]mGFL09279250238[kg]mGFL11435407[kg]mGFL14
GFL☐☐-2M SCR / SDR
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42132C32
26191411[kg]mGFL044840322725[kg]mGFL05
756354464139[kg]mGFL06131102898072[kg]mGFL07180149137128[kg]mGFL09265236224[kg]mGFL11412384[kg]mGFL14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
6.6 - 37Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Weights
GFL☐☐-2M SAK
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42132C32
5445373330[kg]mGFL05857264555149[kg]mGFL06
1461171049587[kg]mGFL07203172160151[kg]mGFL09303274262[kg]mGFL11468440[kg]mGFL14
GFL☐☐-2M SCK
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42132C32
5244363129[kg]mGFL05827061534846[kg]mGFL06
1421131009183[kg]mGFL07196165153144[kg]mGFL09289260248[kg]mGFL11445417[kg]mGFL14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
Lenze | V02-en_GB-03/20146.6 - 38
GFL shaft-mounted helical gearboxesTechnical data
6.6
Weights
GFL☐☐-3M HAR / HBR
132C22132C12112C22100C12090C32080C32071C42071C32063C32132C32100C32080C42063C42
2826[kg]mGFL05514644[kg]mGFL06
91837876[kg]mGFL07154145137132130[kg]mGFL09
297267254245237[kg]mGFL11462432419411[kg]mGFL14
GFL☐☐-3M HCR / HDR
132C22132C12112C22100C12090C32080C32071C42071C32063C32132C32100C32080C42063C42
2725[kg]mGFL05494442[kg]mGFL06
87797472[kg]mGFL07147138130125123[kg]mGFL09
283253240231223[kg]mGFL11439409396388[kg]mGFL14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
6.6 - 39Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Weights
GFL☐☐-3M HAK
132C22132C12112C22100C12090C32080C32071C42071C32063C32132C32100C32080C42063C42
3230[kg]mGFL05585351[kg]mGFL06
102948987[kg]mGFL07170161153148146[kg]mGFL09
321291278269261[kg]mGFL11495465452444[kg]mGFL14
GFL☐☐-3M HCK
132C22132C12112C22100C12090C32080C32071C42071C32063C32132C32100C32080C42063C42
3129[kg]mGFL05565149[kg]mGFL06
98908583[kg]mGFL07163154146141139[kg]mGFL09
307277264255247[kg]mGFL11472442429421[kg]mGFL14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
Lenze | V02-en_GB-03/20146.6 - 40
GFL shaft-mounted helical gearboxesTechnical data
6.6
Weights
GFL☐☐-3M VAR / VBR
132C22132C12112C22100C12090C32080C32071C42071C32063C32132C32100C32080C42063C42
2927[kg]mGFL05544947[kg]mGFL06
96888381[kg]mGFL07162153145140138[kg]mGFL09
313283270261253[kg]mGFL11495465452444[kg]mGFL14
GFL☐☐-3M VCR / VDR
132C22132C12112C22100C12090C32080C32071C42071C32063C32132C32100C32080C42063C42
2826[kg]mGFL05514644[kg]mGFL06
92847977[kg]mGFL07155146138133131[kg]mGFL09
299269256247239[kg]mGFL11472442429421[kg]mGFL14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
6.6 - 41Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Weights
GFL☐☐-3M VAK
132C22132C12112C22100C12090C32080C32071C42071C32063C32132C32100C32080C42063C42
3331[kg]mGFL05615654[kg]mGFL06
107999492[kg]mGFL07178169161156154[kg]mGFL09
337307294285277[kg]mGFL11528498485477[kg]mGFL14
GFL☐☐-3M HCK
132C22132C12112C22100C12090C32080C32071C42071C32063C32132C32100C32080C42063C42
3230[kg]mGFL05585351[kg]mGFL06
103959088[kg]mGFL07171162154149147[kg]mGFL09
323293280271263[kg]mGFL11505475462454[kg]mGFL14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
Lenze | V02-en_GB-03/20146.6 - 42
GFL shaft-mounted helical gearboxesTechnical data
6.6
Weights
GFL☐☐-3M SAR / SBR
132C22132C12112C22100C12090C32080C32071C42071C32063C32132C32100C32080C42063C42
2927[kg]mGFL05524745[kg]mGFL06
92848077[kg]mGFL07157148140135133[kg]mGFL09
302272259250242[kg]mGFL11473443430422[kg]mGFL14
GFL☐☐-3M SCR / SDR
132C22132C12112C22100C12090C32080C32071C42071C32063C32132C32100C32080C42063C42
2826[kg]mGFL05504543[kg]mGFL06
88807673[kg]mGFL07150141133128126[kg]mGFL09
288258245236228[kg]mGFL11450420407399[kg]mGFL14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
6.6 - 43Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Weights
GFL☐☐-3M SAK
132C22132C12112C22100C12090C32080C32071C42071C32063C32132C32100C32080C42063C42
3331[kg]mGFL05595452[kg]mGFL06
103959188[kg]mGFL07173164156151149[kg]mGFL09
326296283274266[kg]mGFL11506476463455[kg]mGFL14
GFL☐☐-3M SCK
132C22132C12112C22100C12090C32080C32071C42071C32063C32132C32100C32080C42063C42
3230[kg]mGFL05575250[kg]mGFL06
99918784[kg]mGFL07166157149144142[kg]mGFL09
312282269260252[kg]mGFL11483453440432[kg]mGFL14
ƒ Weights with oil filling for mounting position A; all values areapproximate.The weights relate to the basic version. Bear in mind that addi-tional weights may be needed, e.g. for motor options.
Lenze | V02-en_GB-03/20146.6 - 44
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 0.55 kW
n22/n2 = 1 ... 24.0
n1 = 143.3 ... 3440 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐5514☐☐0GFL05-2M☐☐☐063C326.4003.9107.2538-9422
74E84AV☐☐☐5514☐☐0GFL04-2M☐☐☐063C327.0254.5107.9490-8520
74E84AV☐☐☐5514☐☐0GFL04-2M☐☐☐063C3210.2384.51512336-5914
74E84AV☐☐☐5514☐☐0GFL04-2M☐☐☐063C3214.7064.52217234-419.8
74E84AV☐☐☐5514☐☐0GFL05-2M☐☐☐063C3215.9043.92418216-389.0
74E84AV☐☐☐5514☐☐0GFL05-2M☐☐☐063C3217.9203.92720192-348.0
74E84AV☐☐☐5514☐☐0GFL04-2M☐☐☐063C3220.5194.13023168-297.0
74E84AV☐☐☐5514☐☐0GFL04-2M☐☐☐063C3222.8573.73426151-266.3
74E84AV☐☐☐5514☐☐0GFL04-2M☐☐☐063C3225.1364.23728137-245.7
74E84AV☐☐☐5514☐☐0GFL04-2M☐☐☐063C3228.0003.54231123-215.1
74E84AV☐☐☐5514☐☐0GFL04-2M☐☐☐063C3231.6003.44735109-194.5
74E84AV☐☐☐5514☐☐0GFL04-2M☐☐☐063C3235.2002.8524098-174.1
74E84AV☐☐☐5514☐☐0GFL04-2M☐☐☐063C3240.6972.7604685-153.5
74E84AV☐☐☐5514☐☐0GFL04-2M☐☐☐063C3245.3332.2675176-133.2
74E84AV☐☐☐5514☐☐0GFL04-2M☐☐☐063C3251.5792.1765867-122.8
74E84AV☐☐☐5514☐☐0GFL05-2M☐☐☐063C3252.0673.2775866-122.8
74E84AV☐☐☐5514☐☐0GFL04-2M☐☐☐063C3257.4551.8856460-102.5
74E84AV☐☐☐5514☐☐0GFL05-2M☐☐☐063C3258.6673.2876659-102.4
82E84AV☐☐☐5514☐☐0GFL05-3M☐☐☐063C3261.6532.0906856-9.72.3
74E84AV☐☐☐5514☐☐0GFL05-2M☐☐☐063C3263.1902.6947154-9.52.3
74E84AV☐☐☐5514☐☐0GFL06-2M☐☐☐063C3264.0803.1957254-9.42.2
74E84AV☐☐☐5514☐☐0GFL04-2M☐☐☐063C3264.6361.2967353-9.32.2
74E84AV☐☐☐5514☐☐0GFL04-2M☐☐☐063C3272.0001.31078148-8.32.0
74E84AV☐☐☐5514☐☐0GFL05-2M☐☐☐063C3271.2002.81068048-8.42.0
82E84AV☐☐☐5514☐☐0GFL05-3M☐☐☐063C3278.6391.91158744-7.61.8
74E84AV☐☐☐5514☐☐0GFL05-2M☐☐☐063C3280.7631.51209143-7.41.8
74E84AV☐☐☐5514☐☐0GFL06-2M☐☐☐063C3281.0002.81209143-7.41.8
74E84AV☐☐☐5514☐☐0GFL05-2M☐☐☐063C3291.0001.513510238-6.61.6
82E84AV☐☐☐5514☐☐0GFL05-3M☐☐☐063C3290.1232.213210038-6.71.6
74E84AV☐☐☐5514☐☐0GFL06-2M☐☐☐063C3291.2502.813510238-6.61.6
82E84AV☐☐☐5514☐☐0GFL05-3M☐☐☐063C32101.5472.114811234-5.91.4
82E84AV☐☐☐5514☐☐0GFL05-3M☐☐☐063C32114.9521.916812730-5.21.3
82E84AV☐☐☐5514☐☐0GFL06-3M☐☐☐063C32116.5713.017012930-5.21.2
82E84AV☐☐☐5514☐☐0GFL05-3M☐☐☐063C32129.5241.718914327-4.61.1
82E84AV☐☐☐5514☐☐0GFL06-3M☐☐☐063C32131.3233.019214526-4.61.1
82E84AV☐☐☐5514☐☐0GFL05-3M☐☐☐063C32140.8171.620615624-4.31.0
82E84AV☐☐☐5514☐☐0GFL06-3M☐☐☐063C32144.3202.521115924-4.21.0
82E84AV☐☐☐5514☐☐0GFL05-3M☐☐☐063C32158.6671.423217522-3.80.9
82E84AV☐☐☐5514☐☐0GFL06-3M☐☐☐063C32162.5832.523718021-3.70.9
82E84AV☐☐☐5514☐☐0GFL05-3M☐☐☐063C32177.0271.325819619-3.40.8
82E84AV☐☐☐5514☐☐0GFL06-3M☐☐☐063C32179.5202.226219819-3.30.8
6.6 - 45Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 0.55 kW
n22/n2 = 1 ... 24.0
n1 = 143.3 ... 3440 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
82E84AV☐☐☐5514☐☐0GFL05-3M☐☐☐063C32199.4671.129122017-3.00.7
82E84AV☐☐☐5514☐☐0GFL06-3M☐☐☐063C32202.2372.029522317-3.00.7
82E84AV☐☐☐5514☐☐0GFL05-3M☐☐☐063C32227.9891.033325215-2.60.6
82E84AV☐☐☐5514☐☐0GFL06-3M☐☐☐063C32231.2001.833725515-2.60.6
82E84AV☐☐☐5514☐☐0GFL06-3M☐☐☐063C32260.4571.538028813-2.30.6
82E84AV☐☐☐5514☐☐0GFL06-3M☐☐☐063C32299.2001.343733012-2.00.5
82E84AV☐☐☐5514☐☐0GFL06-3M☐☐☐063C32293.0181.542832412-2.10.5
82E84AV☐☐☐5514☐☐0GFL07-3M☐☐☐063C32290.7063.142432112-2.10.5
82E84AV☐☐☐5514☐☐0GFL07-3M☐☐☐063C32327.5562.547836211-1.80.4
82E84AV☐☐☐5514☐☐0GFL07-3M☐☐☐063C32352.8112.65153909.8-1.70.4
82E84AV☐☐☐5514☐☐0GFL06-3M☐☐☐063C32367.2001.25364069.4-1.60.4
82E84AV☐☐☐5514☐☐0GFL07-3M☐☐☐063C32397.5332.15804398.7-1.50.4
82E84AV☐☐☐5514☐☐0GFL06-3M☐☐☐063C32413.6671.06044578.3-1.50.4
82E84AV☐☐☐5514☐☐0GFL07-3M☐☐☐063C32430.2221.96284758.0-1.40.3
82E84AV☐☐☐5514☐☐0GFL06-3M☐☐☐063C32475.2000.96935257.2-1.30.3
82E84AV☐☐☐5514☐☐0GFL07-3M☐☐☐063C32522.1331.67625776.6-1.20.3
82E84AV☐☐☐5514☐☐0GFL09-3M☐☐☐063C32554.4702.58096126.2-1.10.3
82E84AV☐☐☐5514☐☐0GFL07-3M☐☐☐063C32562.3911.38216216.1-1.10.3
82E84AV☐☐☐5514☐☐0GFL09-3M☐☐☐063C32624.8792.49126905.5-1.00.2
82E84AV☐☐☐5514☐☐0GFL07-3M☐☐☐063C32633.6801.39257005.4-1.00.2
82E84AV☐☐☐5514☐☐0GFL09-3M☐☐☐063C32700.8752.010237744.9-0.90.2
82E84AV☐☐☐5514☐☐0GFL07-3M☐☐☐063C32718.7861.010497944.8-0.80.2
82E84AV☐☐☐5514☐☐0GFL09-3M☐☐☐063C32789.8751.911538724.4-0.80.2
82E84AV☐☐☐5514☐☐0GFL07-3M☐☐☐063C32809.9001.011828944.3-0.70.2
Lenze | V02-en_GB-03/20146.6 - 46
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 0.75 kW
n22/n2 = 1 ... 24.0
n1 = 141.7 ... 3400 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐7514☐☐0GFL05-2M☐☐☐063C426.4002.9139.8531-9422
74E84AV☐☐☐7514☐☐0GFL04-2M☐☐☐063C427.0253.31411484-8520
74E84AV☐☐☐7514☐☐0GFL04-2M☐☐☐063C4210.2383.32116332-5914
74E84AV☐☐☐7514☐☐0GFL04-2M☐☐☐063C4214.7063.33023231-419.6
74E84AV☐☐☐7514☐☐0GFL05-2M☐☐☐063C4215.9042.93324214-388.9
74E84AV☐☐☐7514☐☐0GFL05-2M☐☐☐063C4217.9202.93727190-347.9
74E84AV☐☐☐7514☐☐0GFL04-2M☐☐☐063C4220.5193.04231166-296.9
74E84AV☐☐☐7514☐☐0GFL04-2M☐☐☐063C4222.8572.74735149-266.2
74E84AV☐☐☐7514☐☐0GFL04-2M☐☐☐063C4225.1363.15138135-245.6
74E84AV☐☐☐7514☐☐0GFL04-2M☐☐☐063C4228.0002.55743121-215.1
74E84AV☐☐☐7514☐☐0GFL04-2M☐☐☐063C4231.6002.56548108-194.5
74E84AV☐☐☐7514☐☐0GFL05-2M☐☐☐063C4232.3443.16649105-194.4
74E84AV☐☐☐7514☐☐0GFL04-2M☐☐☐063C4235.2002.0725497-174.0
74E84AV☐☐☐7514☐☐0GFL05-2M☐☐☐063C4236.4443.1755693-173.9
74E84AV☐☐☐7514☐☐0GFL05-2M☐☐☐063C4240.2332.6826285-153.5
74E84AV☐☐☐7514☐☐0GFL04-2M☐☐☐063C4240.6971.9836284-153.5
74E84AV☐☐☐7514☐☐0GFL04-2M☐☐☐063C4245.3331.6936975-133.1
74E84AV☐☐☐7514☐☐0GFL05-2M☐☐☐063C4245.3332.6936975-133.1
74E84AV☐☐☐7514☐☐0GFL04-2M☐☐☐063C4251.5791.61057966-122.8
74E84AV☐☐☐7514☐☐0GFL05-2M☐☐☐063C4252.0672.31068065-122.7
74E84AV☐☐☐7514☐☐0GFL06-2M☐☐☐063C4252.8002.61088164-112.7
74E84AV☐☐☐7514☐☐0GFL04-2M☐☐☐063C4257.4551.31178859-102.5
74E84AV☐☐☐7514☐☐0GFL05-2M☐☐☐063C4258.6672.31209058-102.4
74E84AV☐☐☐7514☐☐0GFL06-2M☐☐☐063C4259.4812.61229157-102.4
82E84AV☐☐☐7514☐☐0GFL05-3M☐☐☐063C4261.6531.41249355-9.72.3
74E84AV☐☐☐7514☐☐0GFL05-2M☐☐☐063C4263.1901.91299754-9.52.2
74E84AV☐☐☐7514☐☐0GFL06-2M☐☐☐063C4264.0802.31319853-9.42.2
74E84AV☐☐☐7514☐☐0GFL05-2M☐☐☐063C4271.2002.014610948-8.42.0
74E84AV☐☐☐7514☐☐0GFL04-2M☐☐☐063C4272.0001.014711047-8.32.0
74E84AV☐☐☐7514☐☐0GFL06-2M☐☐☐063C4272.1892.514811047-8.32.0
82E84AV☐☐☐7514☐☐0GFL05-3M☐☐☐063C4278.6391.415811843-7.61.8
74E84AV☐☐☐7514☐☐0GFL05-2M☐☐☐063C4280.7631.116512442-7.41.8
74E84AV☐☐☐7514☐☐0GFL06-2M☐☐☐063C4281.0002.016612442-7.41.8
82E84AV☐☐☐7514☐☐0GFL06-3M☐☐☐063C4281.1112.916312242-7.41.8
82E84AV☐☐☐7514☐☐0GFL06-3M☐☐☐063C4288.2002.617813339-6.81.6
82E84AV☐☐☐7514☐☐0GFL05-3M☐☐☐063C4290.1231.618113638-6.71.6
74E84AV☐☐☐7514☐☐0GFL05-2M☐☐☐063C4291.0001.118613937-6.61.6
74E84AV☐☐☐7514☐☐0GFL06-2M☐☐☐063C4291.2502.018714037-6.61.6
82E84AV☐☐☐7514☐☐0GFL05-3M☐☐☐063C42101.5471.520415334-5.91.4
82E84AV☐☐☐7514☐☐0GFL06-3M☐☐☐063C4299.3612.620015034-6.01.4
82E84AV☐☐☐7514☐☐0GFL05-3M☐☐☐063C42114.9521.423117330-5.21.2
6.6 - 47Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 0.75 kW
n22/n2 = 1 ... 24.0
n1 = 141.7 ... 3400 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
82E84AV☐☐☐7514☐☐0GFL06-3M☐☐☐063C42116.5712.223517629-5.21.2
82E84AV☐☐☐7514☐☐0GFL05-3M☐☐☐063C42129.5241.226119526-4.61.1
82E84AV☐☐☐7514☐☐0GFL06-3M☐☐☐063C42131.3232.226419826-4.61.1
82E84AV☐☐☐7514☐☐0GFL05-3M☐☐☐063C42140.8171.228421224-4.31.0
82E84AV☐☐☐7514☐☐0GFL06-3M☐☐☐063C42144.3201.829121724-4.21.0
82E84AV☐☐☐7514☐☐0GFL05-3M☐☐☐063C42158.6671.031923921-3.80.9
82E84AV☐☐☐7514☐☐0GFL06-3M☐☐☐063C42162.5831.832724521-3.70.9
82E84AV☐☐☐7514☐☐0GFL05-3M☐☐☐063C42177.0270.935626719-3.40.8
82E84AV☐☐☐7514☐☐0GFL06-3M☐☐☐063C42179.5201.636127019-3.30.8
82E84AV☐☐☐7514☐☐0GFL07-3M☐☐☐063C42183.2852.936927619-3.30.8
82E84AV☐☐☐7514☐☐0GFL06-3M☐☐☐063C42202.2371.440730517-3.00.7
82E84AV☐☐☐7514☐☐0GFL07-3M☐☐☐063C42206.5192.941631117-2.90.7
82E84AV☐☐☐7514☐☐0GFL06-3M☐☐☐063C42231.2001.346534815-2.60.6
82E84AV☐☐☐7514☐☐0GFL07-3M☐☐☐063C42224.6362.845233815-2.70.6
82E84AV☐☐☐7514☐☐0GFL06-3M☐☐☐063C42260.4571.152439213-2.30.5
82E84AV☐☐☐7514☐☐0GFL07-3M☐☐☐063C42253.1112.451038113-2.40.6
82E84AV☐☐☐7514☐☐0GFL06-3M☐☐☐063C42293.0181.159044112-2.10.5
82E84AV☐☐☐7514☐☐0GFL07-3M☐☐☐063C42290.7062.358543812-2.10.5
82E84AV☐☐☐7514☐☐0GFL09-3M☐☐☐063C42290.8892.958643812-2.10.5
82E84AV☐☐☐7514☐☐0GFL06-3M☐☐☐063C42299.2001.060245111-2.00.5
82E84AV☐☐☐7514☐☐0GFL07-3M☐☐☐063C42327.5561.865949310-1.80.4
82E84AV☐☐☐7514☐☐0GFL09-3M☐☐☐063C42327.8272.966049410-1.80.4
82E84AV☐☐☐7514☐☐0GFL07-3M☐☐☐063C42352.8111.97105319.6-1.70.4
82E84AV☐☐☐7514☐☐0GFL09-3M☐☐☐063C42353.0332.57115329.6-1.70.4
82E84AV☐☐☐7514☐☐0GFL07-3M☐☐☐063C42397.5331.58005998.6-1.50.4
82E84AV☐☐☐7514☐☐0GFL09-3M☐☐☐063C42397.8632.58015998.6-1.50.4
82E84AV☐☐☐7514☐☐0GFL09-3M☐☐☐063C42424.2472.98546398.0-1.40.3
82E84AV☐☐☐7514☐☐0GFL07-3M☐☐☐063C42430.2221.48666487.9-1.40.3
82E84AV☐☐☐7514☐☐0GFL09-3M☐☐☐063C42514.8812.510377756.6-1.20.3
82E84AV☐☐☐7514☐☐0GFL07-3M☐☐☐063C42522.1331.210517866.5-1.20.3
82E84AV☐☐☐7514☐☐0GFL07-3M☐☐☐063C42562.3911.011328476.1-1.10.3
82E84AV☐☐☐7514☐☐0GFL09-3M☐☐☐063C42554.4701.811168356.1-1.10.3
82E84AV☐☐☐7514☐☐0GFL07-3M☐☐☐063C42633.6800.912769545.4-1.00.2
82E84AV☐☐☐7514☐☐0GFL09-3M☐☐☐063C42624.8791.712589415.4-1.00.2
82E84AV☐☐☐7514☐☐0GFL09-3M☐☐☐063C42700.8751.4141110554.9-0.90.2
82E84AV☐☐☐7514☐☐0GFL09-3M☐☐☐063C42789.8751.4159011904.3-0.80.2
Lenze | V02-en_GB-03/20146.6 - 48
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 1.10 kW
n22/n2 = 1 ... 24.0
n1 = 145.4 ... 3490 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐1124☐☐0GFL04-2M☐☐☐071C326.4223.91914543-9323
74E84AV☐☐☐1124☐☐0GFL04-2M☐☐☐071C327.0253.92116497-8521
74E84AV☐☐☐1124☐☐0GFL05-2M☐☐☐071C329.0104.22620387-6716
74E84AV☐☐☐1124☐☐0GFL04-2M☐☐☐071C3210.2383.93023341-5914
74E84AV☐☐☐1124☐☐0GFL04-2M☐☐☐071C3214.7063.24333237-419.9
74E84AV☐☐☐1124☐☐0GFL04-2M☐☐☐071C3216.0872.94736217-379.0
74E84AV☐☐☐1124☐☐0GFL04-2M☐☐☐071C3217.9202.45240195-348.1
74E84AV☐☐☐1124☐☐0GFL04-2M☐☐☐071C3220.5192.36046170-297.1
74E84AV☐☐☐1124☐☐0GFL04-2M☐☐☐071C3222.8571.96751153-266.4
74E84AV☐☐☐1124☐☐0GFL04-2M☐☐☐071C3225.1362.17356139-245.8
74E84AV☐☐☐1124☐☐0GFL04-2M☐☐☐071C3228.0001.88263125-215.2
74E84AV☐☐☐1124☐☐0GFL04-2M☐☐☐071C3231.6001.79271110-194.6
74E84AV☐☐☐1124☐☐0GFL05-2M☐☐☐071C3232.3443.19573108-194.5
74E84AV☐☐☐1124☐☐0GFL04-2M☐☐☐071C3235.2001.41037999-174.1
74E84AV☐☐☐1124☐☐0GFL05-2M☐☐☐071C3236.4442.51068296-174.0
74E84AV☐☐☐1124☐☐0GFL05-2M☐☐☐071C3240.2332.51189087-153.6
74E84AV☐☐☐1124☐☐0GFL04-2M☐☐☐071C3240.6971.31199186-153.6
74E84AV☐☐☐1124☐☐0GFL04-2M☐☐☐071C3245.3331.113210277-133.2
74E84AV☐☐☐1124☐☐0GFL05-2M☐☐☐071C3245.3332.113210277-133.2
74E84AV☐☐☐1124☐☐0GFL05-2M☐☐☐071C3252.0671.715211767-122.8
74E84AV☐☐☐1124☐☐0GFL06-2M☐☐☐071C3252.8003.115411866-112.8
74E84AV☐☐☐1124☐☐0GFL05-2M☐☐☐071C3258.6671.617113260-102.5
74E84AV☐☐☐1124☐☐0GFL06-2M☐☐☐071C3259.4813.017413359-102.4
82E84AV☐☐☐1124☐☐0GFL05-3M☐☐☐071C3261.6531.017713657-9.72.4
74E84AV☐☐☐1124☐☐0GFL05-2M☐☐☐071C3263.1901.318514255-9.52.3
74E84AV☐☐☐1124☐☐0GFL06-2M☐☐☐071C3264.0802.518714455-9.42.3
82E84AV☐☐☐1124☐☐0GFL06-3M☐☐☐071C3266.2132.519114653-9.12.2
74E84AV☐☐☐1124☐☐0GFL05-2M☐☐☐071C3271.2001.420816049-8.42.0
82E84AV☐☐☐1124☐☐0GFL06-3M☐☐☐071C3272.0002.320715949-8.32.0
74E84AV☐☐☐1124☐☐0GFL06-2M☐☐☐071C3272.1892.821116248-8.32.0
82E84AV☐☐☐1124☐☐0GFL05-3M☐☐☐071C3278.6390.922617444-7.61.9
74E84AV☐☐☐1124☐☐0GFL06-2M☐☐☐071C3281.0001.623718243-7.41.8
82E84AV☐☐☐1124☐☐0GFL06-3M☐☐☐071C3281.1112.023317943-7.41.8
82E84AV☐☐☐1124☐☐0GFL06-3M☐☐☐071C3288.2001.825419540-6.81.7
82E84AV☐☐☐1124☐☐0GFL05-3M☐☐☐071C3290.1231.125919939-6.71.6
74E84AV☐☐☐1124☐☐0GFL06-2M☐☐☐071C3291.2501.626720538-6.61.6
82E84AV☐☐☐1124☐☐0GFL06-3M☐☐☐071C3299.3611.828622035-6.01.5
82E84AV☐☐☐1124☐☐0GFL05-3M☐☐☐071C32101.5471.129222434-5.91.4
82E84AV☐☐☐1124☐☐0GFL07-3M☐☐☐071C32113.2063.032625031-5.31.3
82E84AV☐☐☐1124☐☐0GFL05-3M☐☐☐071C32114.9520.933125430-5.21.3
82E84AV☐☐☐1124☐☐0GFL06-3M☐☐☐071C32116.5711.533525830-5.21.3
6.6 - 49Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 1.10 kW
n22/n2 = 1 ... 24.0
n1 = 145.4 ... 3490 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
82E84AV☐☐☐1124☐☐0GFL06-3M☐☐☐071C32131.3231.537829027-4.61.1
82E84AV☐☐☐1124☐☐0GFL07-3M☐☐☐071C32127.5563.036728227-4.71.1
82E84AV☐☐☐1124☐☐0GFL06-3M☐☐☐071C32144.3201.341531924-4.21.0
82E84AV☐☐☐1124☐☐0GFL07-3M☐☐☐071C32147.3472.642432524-4.11.0
82E84AV☐☐☐1124☐☐0GFL06-3M☐☐☐071C32162.5831.246835922-3.70.9
82E84AV☐☐☐1124☐☐0GFL07-3M☐☐☐071C32166.0252.547836721-3.60.9
82E84AV☐☐☐1124☐☐0GFL06-3M☐☐☐071C32179.5201.151639719-3.30.8
82E84AV☐☐☐1124☐☐0GFL07-3M☐☐☐071C32183.2852.252740519-3.30.8
82E84AV☐☐☐1124☐☐0GFL06-3M☐☐☐071C32202.2371.058244717-3.00.7
82E84AV☐☐☐1124☐☐0GFL07-3M☐☐☐071C32206.5192.059445617-2.90.7
82E84AV☐☐☐1124☐☐0GFL07-3M☐☐☐071C32224.6362.064649616-2.70.7
82E84AV☐☐☐1124☐☐0GFL06-3M☐☐☐071C32231.2000.966551115-2.60.6
82E84AV☐☐☐1124☐☐0GFL07-3M☐☐☐071C32253.1111.672855914-2.40.6
82E84AV☐☐☐1124☐☐0GFL07-3M☐☐☐071C32290.7061.683664212-2.10.5
82E84AV☐☐☐1124☐☐0GFL09-3M☐☐☐071C32290.8893.083764312-2.10.5
82E84AV☐☐☐1124☐☐0GFL07-3M☐☐☐071C32327.5561.394272411-1.80.4
82E84AV☐☐☐1124☐☐0GFL09-3M☐☐☐071C32327.8273.094372411-1.80.4
82E84AV☐☐☐1124☐☐0GFL07-3M☐☐☐071C32352.8111.310157799.9-1.70.4
82E84AV☐☐☐1124☐☐0GFL09-3M☐☐☐071C32353.0332.610167809.9-1.70.4
82E84AV☐☐☐1124☐☐0GFL07-3M☐☐☐071C32397.5331.011448788.8-1.50.4
82E84AV☐☐☐1124☐☐0GFL09-3M☐☐☐071C32397.8632.611448798.8-1.50.4
82E84AV☐☐☐1124☐☐0GFL09-3M☐☐☐071C32424.2472.112209378.2-1.40.3
82E84AV☐☐☐1124☐☐0GFL07-3M☐☐☐071C32430.2221.012389508.1-1.40.3
82E84AV☐☐☐1124☐☐0GFL09-3M☐☐☐071C32514.8811.7148111376.8-1.20.3
82E84AV☐☐☐1124☐☐0GFL09-3M☐☐☐071C32554.4701.3159512256.3-1.10.3
82E84AV☐☐☐1124☐☐0GFL09-3M☐☐☐071C32624.8791.2179713805.6-1.00.2
82E84AV☐☐☐1124☐☐0GFL09-3M☐☐☐071C32700.8751.0201615485.0-0.90.2
82E84AV☐☐☐1124☐☐0GFL09-3M☐☐☐071C32789.8751.0227217454.4-0.80.2
Lenze | V02-en_GB-03/20146.6 - 50
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 1.50 kW
n22/n2 = 1 ... 24.0
n1 = 143.8 ... 3450 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐1524☐☐0GFL05-2M☐☐☐071C426.4003.12620539-9423
74E84AV☐☐☐1524☐☐0GFL04-2M☐☐☐071C426.4222.92620537-9322
74E84AV☐☐☐1524☐☐0GFL04-2M☐☐☐071C427.0252.82822491-8521
74E84AV☐☐☐1524☐☐0GFL05-2M☐☐☐071C429.0103.13628383-6716
74E84AV☐☐☐1524☐☐0GFL05-2M☐☐☐071C429.9463.14030347-6015
74E84AV☐☐☐1524☐☐0GFL04-2M☐☐☐071C4210.2382.94131337-5914
74E84AV☐☐☐1524☐☐0GFL05-2M☐☐☐071C4214.5383.15945237-419.9
74E84AV☐☐☐1524☐☐0GFL04-2M☐☐☐071C4214.7062.35945235-419.8
74E84AV☐☐☐1524☐☐0GFL05-2M☐☐☐071C4215.9043.16449217-389.0
74E84AV☐☐☐1524☐☐0GFL04-2M☐☐☐071C4216.0872.16549215-378.9
74E84AV☐☐☐1524☐☐0GFL04-2M☐☐☐071C4217.9201.87255193-348.0
74E84AV☐☐☐1524☐☐0GFL05-2M☐☐☐071C4217.9203.17255193-348.0
74E84AV☐☐☐1524☐☐0GFL05-2M☐☐☐071C4220.2862.98262170-307.1
74E84AV☐☐☐1524☐☐0GFL04-2M☐☐☐071C4220.5191.78363168-297.0
74E84AV☐☐☐1524☐☐0GFL06-2M☐☐☐071C4220.5713.18363168-297.0
74E84AV☐☐☐1524☐☐0GFL04-2M☐☐☐071C4222.8571.49270151-266.3
74E84AV☐☐☐1524☐☐0GFL05-2M☐☐☐071C4222.8572.69270151-266.3
74E84AV☐☐☐1524☐☐0GFL06-2M☐☐☐071C4223.1753.19371149-266.2
74E84AV☐☐☐1524☐☐0GFL05-2M☐☐☐071C4224.8502.910076139-245.8
74E84AV☐☐☐1524☐☐0GFL04-2M☐☐☐071C4225.1361.610177137-245.7
74E84AV☐☐☐1524☐☐0GFL04-2M☐☐☐071C4228.0001.311386123-215.1
74E84AV☐☐☐1524☐☐0GFL05-2M☐☐☐071C4228.0002.411386123-215.1
74E84AV☐☐☐1524☐☐0GFL04-2M☐☐☐071C4231.6001.312797109-194.6
74E84AV☐☐☐1524☐☐0GFL05-2M☐☐☐071C4232.3442.313099107-194.4
74E84AV☐☐☐1524☐☐0GFL06-2M☐☐☐071C4232.8002.9132100105-184.4
74E84AV☐☐☐1524☐☐0GFL04-2M☐☐☐071C4235.2001.014210898-174.1
74E84AV☐☐☐1524☐☐0GFL05-2M☐☐☐071C4236.4441.914711195-173.9
74E84AV☐☐☐1524☐☐0GFL06-2M☐☐☐071C4236.9512.914911393-163.9
74E84AV☐☐☐1524☐☐0GFL05-2M☐☐☐071C4240.2331.816212386-153.6
74E84AV☐☐☐1524☐☐0GFL04-2M☐☐☐071C4240.6971.016412485-153.5
74E84AV☐☐☐1524☐☐0GFL06-2M☐☐☐071C4240.8002.416412585-153.5
74E84AV☐☐☐1524☐☐0GFL05-2M☐☐☐071C4245.3331.518313976-133.2
74E84AV☐☐☐1524☐☐0GFL06-2M☐☐☐071C4245.9632.418514175-133.1
74E84AV☐☐☐1524☐☐0GFL05-2M☐☐☐071C4252.0671.321015966-122.8
74E84AV☐☐☐1524☐☐0GFL06-2M☐☐☐071C4252.8002.221316165-112.7
74E84AV☐☐☐1524☐☐0GFL05-2M☐☐☐071C4258.6671.223617959-102.5
74E84AV☐☐☐1524☐☐0GFL06-2M☐☐☐071C4259.4812.224018258-102.4
74E84AV☐☐☐1524☐☐0GFL05-2M☐☐☐071C4263.1901.025519355-9.52.3
74E84AV☐☐☐1524☐☐0GFL06-2M☐☐☐071C4264.0801.825819654-9.42.2
82E84AV☐☐☐1524☐☐0GFL06-3M☐☐☐071C4266.2131.826319952-9.12.2
74E84AV☐☐☐1524☐☐0GFL05-2M☐☐☐071C4271.2001.028721849-8.42.0
6.6 - 51Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 1.50 kW
n22/n2 = 1 ... 24.0
n1 = 143.8 ... 3450 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
82E84AV☐☐☐1524☐☐0GFL06-3M☐☐☐071C4272.0001.728621748-8.32.0
74E84AV☐☐☐1524☐☐0GFL06-2M☐☐☐071C4272.1892.029122148-8.32.0
82E84AV☐☐☐1524☐☐0GFL07-3M☐☐☐071C4272.4522.928821848-8.32.0
74E84AV☐☐☐1524☐☐0GFL06-2M☐☐☐071C4281.0001.232624843-7.41.8
82E84AV☐☐☐1524☐☐0GFL06-3M☐☐☐071C4281.1111.532224443-7.41.8
82E84AV☐☐☐1524☐☐0GFL07-3M☐☐☐071C4281.6362.932424642-7.41.8
82E84AV☐☐☐1524☐☐0GFL06-3M☐☐☐071C4288.2001.335026639-6.81.6
74E84AV☐☐☐1524☐☐0GFL06-2M☐☐☐071C4291.2501.236827938-6.61.6
82E84AV☐☐☐1524☐☐0GFL07-3M☐☐☐071C4292.4132.536727837-6.51.6
82E84AV☐☐☐1524☐☐0GFL06-3M☐☐☐071C4299.3611.339429935-6.01.5
82E84AV☐☐☐1524☐☐0GFL07-3M☐☐☐071C42104.1272.541331433-5.81.4
82E84AV☐☐☐1524☐☐0GFL07-3M☐☐☐071C42113.2062.244934131-5.31.3
82E84AV☐☐☐1524☐☐0GFL06-3M☐☐☐071C42116.5711.146335130-5.21.2
82E84AV☐☐☐1524☐☐0GFL07-3M☐☐☐071C42127.5562.250638427-4.71.1
82E84AV☐☐☐1524☐☐0GFL06-3M☐☐☐071C42131.3231.152139626-4.61.1
82E84AV☐☐☐1524☐☐0GFL06-3M☐☐☐071C42144.3200.957343524-4.21.0
82E84AV☐☐☐1524☐☐0GFL07-3M☐☐☐071C42147.3471.958544423-4.11.0
82E84AV☐☐☐1524☐☐0GFL09-3M☐☐☐071C42148.8153.259144823-4.01.0
82E84AV☐☐☐1524☐☐0GFL06-3M☐☐☐071C42162.5830.964549021-3.70.9
82E84AV☐☐☐1524☐☐0GFL07-3M☐☐☐071C42166.0251.865950021-3.60.9
82E84AV☐☐☐1524☐☐0GFL09-3M☐☐☐071C42167.7123.266650521-3.60.9
82E84AV☐☐☐1524☐☐0GFL07-3M☐☐☐071C42183.2851.672755219-3.30.8
82E84AV☐☐☐1524☐☐0GFL09-3M☐☐☐071C42185.1112.773555819-3.20.8
82E84AV☐☐☐1524☐☐0GFL07-3M☐☐☐071C42206.5191.581962217-2.90.7
82E84AV☐☐☐1524☐☐0GFL09-3M☐☐☐071C42208.6172.782862817-2.90.7
82E84AV☐☐☐1524☐☐0GFL07-3M☐☐☐071C42224.6361.489167715-2.70.6
82E84AV☐☐☐1524☐☐0GFL09-3M☐☐☐071C42224.7782.689267715-2.70.6
82E84AV☐☐☐1524☐☐0GFL07-3M☐☐☐071C42253.1111.2100476214-2.40.6
82E84AV☐☐☐1524☐☐0GFL09-3M☐☐☐071C42253.3212.6100576314-2.40.6
82E84AV☐☐☐1524☐☐0GFL07-3M☐☐☐071C42290.7061.1115487612-2.10.5
82E84AV☐☐☐1524☐☐0GFL09-3M☐☐☐071C42290.8892.2115487612-2.10.5
82E84AV☐☐☐1524☐☐0GFL07-3M☐☐☐071C42327.5560.9130098711-1.80.4
82E84AV☐☐☐1524☐☐0GFL09-3M☐☐☐071C42327.8272.2130198711-1.80.4
82E84AV☐☐☐1524☐☐0GFL07-3M☐☐☐071C42352.8110.9140010639.8-1.70.4
82E84AV☐☐☐1524☐☐0GFL09-3M☐☐☐071C42353.0331.9140110639.8-1.70.4
82E84AV☐☐☐1524☐☐0GFL09-3M☐☐☐071C42397.8631.9157911988.7-1.50.4
82E84AV☐☐☐1524☐☐0GFL09-3M☐☐☐071C42424.2471.5168312788.1-1.40.3
82E84AV☐☐☐1524☐☐0GFL09-3M☐☐☐071C42514.8811.3204315516.7-1.20.3
82E84AV☐☐☐1524☐☐0GFL09-3M☐☐☐071C42554.4700.9220016706.2-1.10.3
Lenze | V02-en_GB-03/20146.6 - 52
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 2.20 kW
n22/n2 = 1 ... 24.0
n1 = 145.8 ... 3500 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐2224☐☐0GFL04-2M☐☐☐080C326.4222.33728545-9323
74E84AV☐☐☐2224☐☐0GFL04-2M☐☐☐080C327.0252.14131498-8521
74E84AV☐☐☐2224☐☐0GFL05-2M☐☐☐080C329.0103.85339389-6716
74E84AV☐☐☐2224☐☐0GFL04-2M☐☐☐080C3210.2382.06045342-5914
74E84AV☐☐☐2224☐☐0GFL05-2M☐☐☐080C3214.5382.78564241-4110
74E84AV☐☐☐2224☐☐0GFL04-2M☐☐☐080C3214.7061.68664238-419.9
74E84AV☐☐☐2224☐☐0GFL05-2M☐☐☐080C3215.9042.59369220-389.2
74E84AV☐☐☐2224☐☐0GFL04-2M☐☐☐080C3216.0871.59470218-379.1
74E84AV☐☐☐2224☐☐0GFL04-2M☐☐☐080C3217.9201.210478195-348.1
74E84AV☐☐☐2224☐☐0GFL05-2M☐☐☐080C3217.9202.310478195-348.1
74E84AV☐☐☐2224☐☐0GFL05-2M☐☐☐080C3220.2862.111889173-307.2
74E84AV☐☐☐2224☐☐0GFL04-2M☐☐☐080C3220.5191.212090171-297.1
74E84AV☐☐☐2224☐☐0GFL04-2M☐☐☐080C3222.8570.9133100153-266.4
74E84AV☐☐☐2224☐☐0GFL05-2M☐☐☐080C3222.8571.8133100153-266.4
74E84AV☐☐☐2224☐☐0GFL05-2M☐☐☐080C3224.8502.0145109141-245.9
74E84AV☐☐☐2224☐☐0GFL04-2M☐☐☐080C3225.1361.1146110139-245.8
74E84AV☐☐☐2224☐☐0GFL05-2M☐☐☐080C3228.0001.6163122125-215.2
74E84AV☐☐☐2224☐☐0GFL06-2M☐☐☐080C3228.3893.1165124123-215.1
74E84AV☐☐☐2224☐☐0GFL05-2M☐☐☐080C3232.3441.6188141108-194.5
74E84AV☐☐☐2224☐☐0GFL06-2M☐☐☐080C3232.8002.9191143107-184.5
74E84AV☐☐☐2224☐☐0GFL05-2M☐☐☐080C3236.4441.321215996-174.0
74E84AV☐☐☐2224☐☐0GFL06-2M☐☐☐080C3236.9512.421516195-164.0
74E84AV☐☐☐2224☐☐0GFL05-2M☐☐☐080C3240.2331.323417687-153.6
74E84AV☐☐☐2224☐☐0GFL06-2M☐☐☐080C3240.8002.423817886-153.6
74E84AV☐☐☐2224☐☐0GFL05-2M☐☐☐080C3245.3331.026419877-133.2
74E84AV☐☐☐2224☐☐0GFL06-2M☐☐☐080C3245.9632.026820176-133.2
74E84AV☐☐☐2224☐☐0GFL07-2M☐☐☐080C3252.0673.130322767-122.8
74E84AV☐☐☐2224☐☐0GFL06-2M☐☐☐080C3252.8001.830823166-112.8
74E84AV☐☐☐2224☐☐0GFL07-2M☐☐☐080C3258.6673.134225660-102.5
74E84AV☐☐☐2224☐☐0GFL06-2M☐☐☐080C3259.4811.534626059-102.5
74E84AV☐☐☐2224☐☐0GFL06-2M☐☐☐080C3264.0801.337328055-9.42.3
74E84AV☐☐☐2224☐☐0GFL07-2M☐☐☐080C3263.1902.436827655-9.52.3
82E84AV☐☐☐2224☐☐0GFL07-3M☐☐☐080C3265.3062.237528154-9.22.2
82E84AV☐☐☐2224☐☐0GFL06-3M☐☐☐080C3266.2131.238028553-9.12.2
82E84AV☐☐☐2224☐☐0GFL06-3M☐☐☐080C3272.0001.141331049-8.32.0
74E84AV☐☐☐2224☐☐0GFL06-2M☐☐☐080C3272.1891.442031549-8.32.0
74E84AV☐☐☐2224☐☐0GFL07-2M☐☐☐080C3271.2002.741531149-8.42.1
82E84AV☐☐☐2224☐☐0GFL07-3M☐☐☐080C3272.4522.041631248-8.32.0
74E84AV☐☐☐2224☐☐0GFL07-2M☐☐☐080C3279.8751.646534944-7.51.8
82E84AV☐☐☐2224☐☐0GFL06-3M☐☐☐080C3281.1111.046534943-7.41.8
82E84AV☐☐☐2224☐☐0GFL07-3M☐☐☐080C3281.6362.046835143-7.41.8
6.6 - 53Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 2.20 kW
n22/n2 = 1 ... 24.0
n1 = 145.8 ... 3500 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
82E84AV☐☐☐2224☐☐0GFL06-3M☐☐☐080C3288.2000.950637940-6.81.7
74E84AV☐☐☐2224☐☐0GFL07-2M☐☐☐080C3290.0001.652439339-6.71.6
82E84AV☐☐☐2224☐☐0GFL07-3M☐☐☐080C3292.4131.753039738-6.51.6
82E84AV☐☐☐2224☐☐0GFL09-3M☐☐☐080C3293.3333.053540138-6.41.6
82E84AV☐☐☐2224☐☐0GFL06-3M☐☐☐080C3299.3610.957042735-6.01.5
82E84AV☐☐☐2224☐☐0GFL07-3M☐☐☐080C32104.1271.759744834-5.81.4
82E84AV☐☐☐2224☐☐0GFL09-3M☐☐☐080C32105.1853.060345233-5.71.4
82E84AV☐☐☐2224☐☐0GFL07-3M☐☐☐080C32113.2061.564948731-5.31.3
82E84AV☐☐☐2224☐☐0GFL09-3M☐☐☐080C32114.3332.765649231-5.31.3
82E84AV☐☐☐2224☐☐0GFL07-3M☐☐☐080C32127.5561.573254927-4.71.1
82E84AV☐☐☐2224☐☐0GFL09-3M☐☐☐080C32128.8522.773955427-4.71.1
82E84AV☐☐☐2224☐☐0GFL07-3M☐☐☐080C32147.3471.384563424-4.11.0
82E84AV☐☐☐2224☐☐0GFL09-3M☐☐☐080C32148.8152.385464024-4.01.0
82E84AV☐☐☐2224☐☐0GFL07-3M☐☐☐080C32166.0251.295271421-3.60.9
82E84AV☐☐☐2224☐☐0GFL09-3M☐☐☐080C32167.7122.396272121-3.60.9
82E84AV☐☐☐2224☐☐0GFL07-3M☐☐☐080C32183.2851.1105278819-3.30.8
82E84AV☐☐☐2224☐☐0GFL09-3M☐☐☐080C32185.1112.0106279619-3.20.8
82E84AV☐☐☐2224☐☐0GFL07-3M☐☐☐080C32206.5191.0118588817-2.90.7
82E84AV☐☐☐2224☐☐0GFL09-3M☐☐☐080C32208.6172.0119789717-2.90.7
82E84AV☐☐☐2224☐☐0GFL07-3M☐☐☐080C32224.6361.0128996616-2.70.7
82E84AV☐☐☐2224☐☐0GFL09-3M☐☐☐080C32224.7781.8129096716-2.70.7
82E84AV☐☐☐2224☐☐0GFL09-3M☐☐☐080C32253.3211.81453108914-2.40.6
82E84AV☐☐☐2224☐☐0GFL11-3M☐☐☐080C32267.2593.21533114913-2.30.6
82E84AV☐☐☐2224☐☐0GFL09-3M☐☐☐080C32290.8891.51669125112-2.10.5
82E84AV☐☐☐2224☐☐0GFL09-3M☐☐☐080C32327.8271.51881141011-1.80.4
82E84AV☐☐☐2224☐☐0GFL11-3M☐☐☐080C32327.5562.81879140911-1.80.5
82E84AV☐☐☐2224☐☐0GFL09-3M☐☐☐080C32353.0331.3202515189.9-1.70.4
82E84AV☐☐☐2224☐☐0GFL11-3M☐☐☐080C32358.0772.4205415409.8-1.70.4
82E84AV☐☐☐2224☐☐0GFL09-3M☐☐☐080C32397.8631.3228217118.8-1.50.4
82E84AV☐☐☐2224☐☐0GFL11-3M☐☐☐080C32403.4672.4231517358.7-1.50.4
82E84AV☐☐☐2224☐☐0GFL09-3M☐☐☐080C32424.2471.1243418258.3-1.40.3
82E84AV☐☐☐2224☐☐0GFL11-3M☐☐☐080C32430.2222.3246818508.1-1.40.3
82E84AV☐☐☐2224☐☐0GFL11-3M☐☐☐080C32522.1331.9299522456.7-1.20.3
82E84AV☐☐☐2224☐☐0GFL11-3M☐☐☐080C32562.3911.6322624196.2-1.10.3
82E84AV☐☐☐2224☐☐0GFL11-3M☐☐☐080C32633.6801.5363527255.5-1.00.2
82E84AV☐☐☐2224☐☐0GFL11-3M☐☐☐080C32710.8881.2407830574.9-0.80.2
82E84AV☐☐☐2224☐☐0GFL11-3M☐☐☐080C32801.0001.2459534454.4-0.80.2
Lenze | V02-en_GB-03/20146.6 - 54
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 3.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐3024☐☐0GFL05-2M☐☐☐080C426.4002.65138544-14123
74E84AV☐☐☐3024☐☐0GFL04-2M☐☐☐080C426.4221.75139542-14023
74E84AV☐☐☐3024☐☐0GFL06-2M☐☐☐080C426.4503.15239540-14023
74E84AV☐☐☐3024☐☐0GFL04-2M☐☐☐080C427.0251.55642495-12821
74E84AV☐☐☐3024☐☐0GFL05-2M☐☐☐080C429.0102.87254386-10016
74E84AV☐☐☐3024☐☐0GFL05-2M☐☐☐080C429.9462.67960350-9115
74E84AV☐☐☐3024☐☐0GFL06-2M☐☐☐080C4210.0923.18161345-8914
74E84AV☐☐☐3024☐☐0GFL04-2M☐☐☐080C4210.2381.58261340-8814
74E84AV☐☐☐3024☐☐0GFL05-2M☐☐☐080C4214.5382.011687239-6210
74E84AV☐☐☐3024☐☐0GFL04-2M☐☐☐080C4214.7061.211888237-619.9
74E84AV☐☐☐3024☐☐0GFL06-2M☐☐☐080C4214.7433.111888236-619.8
74E84AV☐☐☐3024☐☐0GFL05-2M☐☐☐080C4215.9041.812795219-579.1
74E84AV☐☐☐3024☐☐0GFL04-2M☐☐☐080C4216.0871.112996216-569.0
74E84AV☐☐☐3024☐☐0GFL06-2M☐☐☐080C4216.1283.112997216-569.0
74E84AV☐☐☐3024☐☐0GFL05-2M☐☐☐080C4217.9201.6143107194-508.1
74E84AV☐☐☐3024☐☐0GFL06-2M☐☐☐080C4218.1693.1145109192-508.0
74E84AV☐☐☐3024☐☐0GFL05-2M☐☐☐080C4220.2861.6162122172-447.2
74E84AV☐☐☐3024☐☐0GFL07-2M☐☐☐080C4220.2863.1162122172-447.2
74E84AV☐☐☐3024☐☐0GFL06-2M☐☐☐080C4220.5712.9164123169-447.1
74E84AV☐☐☐3024☐☐0GFL05-2M☐☐☐080C4222.8571.3183137152-396.3
74E84AV☐☐☐3024☐☐0GFL07-2M☐☐☐080C4222.8573.1183137152-396.3
74E84AV☐☐☐3024☐☐0GFL06-2M☐☐☐080C4223.1752.5185139150-396.3
74E84AV☐☐☐3024☐☐0GFL05-2M☐☐☐080C4224.8501.5199149140-365.8
74E84AV☐☐☐3024☐☐0GFL06-2M☐☐☐080C4225.2002.8201151138-365.8
74E84AV☐☐☐3024☐☐0GFL05-2M☐☐☐080C4228.0001.2224168124-325.2
74E84AV☐☐☐3024☐☐0GFL06-2M☐☐☐080C4228.3892.3227170123-325.1
74E84AV☐☐☐3024☐☐0GFL05-2M☐☐☐080C4232.3441.1258194108-284.5
74E84AV☐☐☐3024☐☐0GFL07-2M☐☐☐080C4232.3442.9258194108-284.5
74E84AV☐☐☐3024☐☐0GFL06-2M☐☐☐080C4232.8002.1262197106-274.4
74E84AV☐☐☐3024☐☐0GFL05-2M☐☐☐080C4236.4440.929121896-254.0
74E84AV☐☐☐3024☐☐0GFL07-2M☐☐☐080C4236.4442.929121896-254.0
74E84AV☐☐☐3024☐☐0GFL06-2M☐☐☐080C4236.9511.829522194-243.9
74E84AV☐☐☐3024☐☐0GFL07-2M☐☐☐080C4239.6422.431723888-233.7
74E84AV☐☐☐3024☐☐0GFL05-2M☐☐☐080C4240.2330.932124187-223.6
74E84AV☐☐☐3024☐☐0GFL06-2M☐☐☐080C4240.8001.732624485-223.6
74E84AV☐☐☐3024☐☐0GFL07-2M☐☐☐080C4244.6672.435726878-203.3
74E84AV☐☐☐3024☐☐0GFL06-2M☐☐☐080C4245.9631.436727576-203.2
74E84AV☐☐☐3024☐☐0GFL07-2M☐☐☐080C4252.0672.341631267-172.8
74E84AV☐☐☐3024☐☐0GFL06-2M☐☐☐080C4252.8001.342231666-172.8
74E84AV☐☐☐3024☐☐0GFL06-2M☐☐☐080C4259.4811.147535659-152.4
74E84AV☐☐☐3024☐☐0GFL07-2M☐☐☐080C4258.6672.346935259-152.5
6.6 - 55Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 3.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐3024☐☐0GFL07-2M☐☐☐080C4263.1901.850537955-142.3
82E84AV☐☐☐3024☐☐0GFL09-3M☐☐☐080C4263.3262.649837455-142.3
74E84AV☐☐☐3024☐☐0GFL06-2M☐☐☐080C4264.0801.051238454-142.3
82E84AV☐☐☐3024☐☐0GFL06-3M☐☐☐080C4266.2130.952139153-142.2
82E84AV☐☐☐3024☐☐0GFL07-3M☐☐☐080C4265.3061.651438553-142.2
74E84AV☐☐☐3024☐☐0GFL07-2M☐☐☐080C4271.2002.056942749-132.0
74E84AV☐☐☐3024☐☐0GFL06-2M☐☐☐080C4272.1891.057743348-132.0
82E84AV☐☐☐3024☐☐0GFL07-3M☐☐☐080C4272.4521.557042848-122.0
82E84AV☐☐☐3024☐☐0GFL09-3M☐☐☐080C4273.1732.557643248-122.0
74E84AV☐☐☐3024☐☐0GFL07-2M☐☐☐080C4279.8751.263847944-111.8
82E84AV☐☐☐3024☐☐0GFL07-3M☐☐☐080C4281.6361.564248243-111.8
82E84AV☐☐☐3024☐☐0GFL09-3M☐☐☐080C4282.4652.564948742-111.8
74E84AV☐☐☐3024☐☐0GFL07-2M☐☐☐080C4290.0001.271953939-101.6
82E84AV☐☐☐3024☐☐0GFL07-3M☐☐☐080C4292.4131.372754538-9.71.6
82E84AV☐☐☐3024☐☐0GFL09-3M☐☐☐080C4293.3332.273455137-9.61.6
82E84AV☐☐☐3024☐☐0GFL07-3M☐☐☐080C42104.1271.381961433-8.61.4
82E84AV☐☐☐3024☐☐0GFL09-3M☐☐☐080C42105.1852.282862133-8.61.4
82E84AV☐☐☐3024☐☐0GFL07-3M☐☐☐080C42113.2061.189166831-8.01.3
82E84AV☐☐☐3024☐☐0GFL09-3M☐☐☐080C42114.3332.090067530-7.91.3
82E84AV☐☐☐3024☐☐0GFL07-3M☐☐☐080C42127.5561.1100475327-7.11.1
82E84AV☐☐☐3024☐☐0GFL09-3M☐☐☐080C42128.8522.0101476027-7.01.1
82E84AV☐☐☐3024☐☐0GFL07-3M☐☐☐080C42147.3470.9115987024-6.11.0
82E84AV☐☐☐3024☐☐0GFL09-3M☐☐☐080C42148.8151.7117187823-6.11.0
82E84AV☐☐☐3024☐☐0GFL11-3M☐☐☐080C42149.1443.2117388023-6.01.0
82E84AV☐☐☐3024☐☐0GFL07-3M☐☐☐080C42166.0250.9130698021-5.40.9
82E84AV☐☐☐3024☐☐0GFL09-3M☐☐☐080C42167.7121.7132099021-5.40.9
82E84AV☐☐☐3024☐☐0GFL11-3M☐☐☐080C42168.0493.2132299221-5.40.9
82E84AV☐☐☐3024☐☐0GFL09-3M☐☐☐080C42185.1111.51456109219-4.90.8
82E84AV☐☐☐3024☐☐0GFL11-3M☐☐☐080C42182.7922.71438107919-4.90.8
82E84AV☐☐☐3024☐☐0GFL09-3M☐☐☐080C42208.6171.51641123117-4.30.7
82E84AV☐☐☐3024☐☐0GFL11-3M☐☐☐080C42205.9632.71621121517-4.40.7
82E84AV☐☐☐3024☐☐0GFL09-3M☐☐☐080C42224.7781.31769132616-4.00.7
82E84AV☐☐☐3024☐☐0GFL11-3M☐☐☐080C42224.6362.41767132616-4.00.7
82E84AV☐☐☐3024☐☐0GFL09-3M☐☐☐080C42253.3211.31993149514-3.60.6
82E84AV☐☐☐3024☐☐0GFL11-3M☐☐☐080C42253.1112.41991149414-3.60.6
82E84AV☐☐☐3024☐☐0GFL11-3M☐☐☐080C42267.2592.32103157713-3.40.5
82E84AV☐☐☐3024☐☐0GFL09-3M☐☐☐080C42290.8891.12289171712-3.10.5
82E84AV☐☐☐3024☐☐0GFL09-3M☐☐☐080C42327.8271.12579193511-2.80.4
82E84AV☐☐☐3024☐☐0GFL11-3M☐☐☐080C42327.5562.02577193311-2.80.4
82E84AV☐☐☐3024☐☐0GFL09-3M☐☐☐080C42353.0331.0277820839.9-2.60.4
82E84AV☐☐☐3024☐☐0GFL11-3M☐☐☐080C42358.0771.8281721139.7-2.50.4
Lenze | V02-en_GB-03/20146.6 - 56
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 3.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
82E84AV☐☐☐3024☐☐0GFL09-3M☐☐☐080C42397.8631.0313023488.8-2.30.4
82E84AV☐☐☐3024☐☐0GFL11-3M☐☐☐080C42403.4671.8317423818.6-2.20.4
82E84AV☐☐☐3024☐☐0GFL11-3M☐☐☐080C42430.2221.7338525398.1-2.10.3
82E84AV☐☐☐3024☐☐0GFL11-3M☐☐☐080C42522.1331.4410830816.7-1.70.3
82E84AV☐☐☐3024☐☐0GFL11-3M☐☐☐080C42562.3911.1442533196.2-1.60.3
82E84AV☐☐☐3024☐☐0GFL11-3M☐☐☐080C42633.6801.1498637395.5-1.40.2
82E84AV☐☐☐3024☐☐0GFL11-3M☐☐☐080C42710.8880.9559341954.9-1.30.2
6.6 - 57Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 4.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐4024☐☐0GFL05-2M☐☐☐090C326.4001.96848544-9423
78E84AV☐☐☐4024☐☐0GFL04-2M☐☐☐090C326.4221.26848542-9323
74E84AV☐☐☐4024☐☐0GFL06-2M☐☐☐090C326.4502.96948540-9323
78E84AV☐☐☐4024☐☐0GFL04-2M☐☐☐090C327.0251.17552495-8521
74E84AV☐☐☐4024☐☐0GFL05-2M☐☐☐090C329.0102.19667386-6716
74E84AV☐☐☐4024☐☐0GFL05-2M☐☐☐090C329.9462.010674350-6015
74E84AV☐☐☐4024☐☐0GFL06-2M☐☐☐090C3210.0922.910875345-6014
78E84AV☐☐☐4024☐☐0GFL04-2M☐☐☐090C3210.2381.110976340-5914
74E84AV☐☐☐4024☐☐0GFL05-2M☐☐☐090C3214.5381.5155108239-4110
74E84AV☐☐☐4024☐☐0GFL06-2M☐☐☐090C3214.7432.9157110236-419.8
74E84AV☐☐☐4024☐☐0GFL05-2M☐☐☐090C3215.9041.4169119219-389.1
74E84AV☐☐☐4024☐☐0GFL06-2M☐☐☐090C3216.1282.8172120216-379.0
74E84AV☐☐☐4024☐☐0GFL05-2M☐☐☐090C3217.9201.2191134194-348.1
74E84AV☐☐☐4024☐☐0GFL06-2M☐☐☐090C3218.1692.3194136192-338.0
74E84AV☐☐☐4024☐☐0GFL05-2M☐☐☐090C3220.2861.2216151172-307.2
74E84AV☐☐☐4024☐☐0GFL07-2M☐☐☐090C3220.2862.9216151172-307.2
74E84AV☐☐☐4024☐☐0GFL06-2M☐☐☐090C3220.5712.2219153169-297.1
74E84AV☐☐☐4024☐☐0GFL05-2M☐☐☐090C3222.8571.0243170152-266.3
74E84AV☐☐☐4024☐☐0GFL07-2M☐☐☐090C3222.8572.9243170152-266.3
74E84AV☐☐☐4024☐☐0GFL06-2M☐☐☐090C3223.1751.8247173150-266.3
74E84AV☐☐☐4024☐☐0GFL05-2M☐☐☐090C3224.8501.1265185140-245.8
74E84AV☐☐☐4024☐☐0GFL06-2M☐☐☐090C3225.2002.1268188138-245.8
74E84AV☐☐☐4024☐☐0GFL05-2M☐☐☐090C3228.0000.9298209124-215.2
74E84AV☐☐☐4024☐☐0GFL06-2M☐☐☐090C3228.3891.7302212123-215.1
74E84AV☐☐☐4024☐☐0GFL07-2M☐☐☐090C3232.3442.8345241108-194.5
74E84AV☐☐☐4024☐☐0GFL06-2M☐☐☐090C3232.8001.6349245106-184.4
74E84AV☐☐☐4024☐☐0GFL07-2M☐☐☐090C3236.4442.838827296-174.0
74E84AV☐☐☐4024☐☐0GFL06-2M☐☐☐090C3236.9511.339427694-163.9
74E84AV☐☐☐4024☐☐0GFL07-2M☐☐☐090C3239.6422.342229688-153.7
74E84AV☐☐☐4024☐☐0GFL06-2M☐☐☐090C3240.8001.343530485-153.6
74E84AV☐☐☐4024☐☐0GFL07-2M☐☐☐090C3244.6672.347633378-133.3
74E84AV☐☐☐4024☐☐0GFL06-2M☐☐☐090C3245.9631.149034376-133.2
74E84AV☐☐☐4024☐☐0GFL09-2M☐☐☐090C3251.3332.354738368-122.8
74E84AV☐☐☐4024☐☐0GFL07-2M☐☐☐090C3252.0671.955538867-122.8
74E84AV☐☐☐4024☐☐0GFL06-2M☐☐☐090C3252.8001.056239466-112.8
74E84AV☐☐☐4024☐☐0GFL09-2M☐☐☐090C3257.8522.361643160-102.5
74E84AV☐☐☐4024☐☐0GFL07-2M☐☐☐090C3258.6671.762543759-102.5
74E84AV☐☐☐4024☐☐0GFL09-2M☐☐☐090C3262.3002.066446556-9.62.3
74E84AV☐☐☐4024☐☐0GFL07-2M☐☐☐090C3263.1901.667347155-9.52.3
82E84AV☐☐☐4024☐☐0GFL09-3M☐☐☐090C3263.3262.066446555-9.52.3
82E84AV☐☐☐4024☐☐0GFL07-3M☐☐☐090C3265.3061.268548053-9.22.2
Lenze | V02-en_GB-03/20146.6 - 58
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 4.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐4024☐☐0GFL09-2M☐☐☐090C3270.2112.274852350-8.62.1
74E84AV☐☐☐4024☐☐0GFL07-2M☐☐☐090C3271.2001.675853149-8.42.0
82E84AV☐☐☐4024☐☐0GFL07-3M☐☐☐090C3272.4521.176053248-8.32.0
82E84AV☐☐☐4024☐☐0GFL09-3M☐☐☐090C3273.1731.976853748-8.22.0
74E84AV☐☐☐4024☐☐0GFL07-2M☐☐☐090C3279.8751.085159644-7.51.8
74E84AV☐☐☐4024☐☐0GFL09-2M☐☐☐090C3278.7501.783958744-7.61.8
82E84AV☐☐☐4024☐☐0GFL07-3M☐☐☐090C3281.6361.185660043-7.41.8
82E84AV☐☐☐4024☐☐0GFL09-3M☐☐☐090C3282.4651.986560642-7.31.8
74E84AV☐☐☐4024☐☐0GFL07-2M☐☐☐090C3290.0000.995967139-6.71.6
74E84AV☐☐☐4024☐☐0GFL09-2M☐☐☐090C3288.7501.794566239-6.81.6
82E84AV☐☐☐4024☐☐0GFL07-3M☐☐☐090C3292.4130.996967938-6.51.6
82E84AV☐☐☐4024☐☐0GFL09-3M☐☐☐090C3293.3331.697968537-6.41.6
82E84AV☐☐☐4024☐☐0GFL11-3M☐☐☐090C3293.5403.198168737-6.41.6
82E84AV☐☐☐4024☐☐0GFL07-3M☐☐☐090C32104.1270.9109276533-5.81.4
82E84AV☐☐☐4024☐☐0GFL09-3M☐☐☐090C32105.1851.6110377233-5.71.4
82E84AV☐☐☐4024☐☐0GFL11-3M☐☐☐090C32105.3973.1110677433-5.71.4
82E84AV☐☐☐4024☐☐0GFL09-3M☐☐☐090C32114.3331.5119984030-5.31.3
82E84AV☐☐☐4024☐☐0GFL09-3M☐☐☐090C32128.8521.5135294627-4.71.1
82E84AV☐☐☐4024☐☐0GFL09-3M☐☐☐090C32148.8151.31561109323-4.01.0
82E84AV☐☐☐4024☐☐0GFL11-3M☐☐☐090C32149.1442.41565109523-4.01.0
82E84AV☐☐☐4024☐☐0GFL09-3M☐☐☐090C32167.7121.31759123221-3.60.9
82E84AV☐☐☐4024☐☐0GFL11-3M☐☐☐090C32168.0492.41763123421-3.60.9
82E84AV☐☐☐4024☐☐0GFL09-3M☐☐☐090C32185.1111.11942135919-3.20.8
82E84AV☐☐☐4024☐☐0GFL11-3M☐☐☐090C32182.7922.11918134219-3.30.8
82E84AV☐☐☐4024☐☐0GFL09-3M☐☐☐090C32208.6171.12189153217-2.90.7
82E84AV☐☐☐4024☐☐0GFL11-3M☐☐☐090C32205.9632.12161151217-2.90.7
82E84AV☐☐☐4024☐☐0GFL14-3M☐☐☐090C32202.0742.52120148417-3.00.7
82E84AV☐☐☐4024☐☐0GFL09-3M☐☐☐090C32224.7781.02358165116-2.70.7
82E84AV☐☐☐4024☐☐0GFL11-3M☐☐☐090C32224.6361.82357165016-2.70.7
82E84AV☐☐☐4024☐☐0GFL09-3M☐☐☐090C32253.3211.02657186014-2.40.6
82E84AV☐☐☐4024☐☐0GFL11-3M☐☐☐090C32253.1111.82655185914-2.40.6
82E84AV☐☐☐4024☐☐0GFL11-3M☐☐☐090C32267.2591.72804196313-2.30.5
82E84AV☐☐☐4024☐☐0GFL11-3M☐☐☐090C32327.5561.53436240511-1.80.4
82E84AV☐☐☐4024☐☐0GFL14-3M☐☐☐090C32352.8112.2370125919.9-1.70.4
82E84AV☐☐☐4024☐☐0GFL11-3M☐☐☐090C32358.0771.3375626309.7-1.70.4
82E84AV☐☐☐4024☐☐0GFL14-3M☐☐☐090C32397.5332.2417029198.8-1.50.4
82E84AV☐☐☐4024☐☐0GFL11-3M☐☐☐090C32403.4671.3423329638.6-1.50.4
82E84AV☐☐☐4024☐☐0GFL11-3M☐☐☐090C32430.2221.3451331598.1-1.40.3
82E84AV☐☐☐4024☐☐0GFL14-3M☐☐☐090C32430.2222.2451331598.1-1.40.3
82E84AV☐☐☐4024☐☐0GFL11-3M☐☐☐090C32522.1331.0547738346.7-1.20.3
82E84AV☐☐☐4024☐☐0GFL14-3M☐☐☐090C32522.1331.8547738346.7-1.20.3
6.6 - 59Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 4.00 kW
n22/n2 = 1 ... 24.0
n1 = 145.0 ... 3480 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
82E84AV☐☐☐4024☐☐0GFL14-3M☐☐☐090C32562.3911.5590041306.2-1.10.3
82E84AV☐☐☐4024☐☐0GFL14-3M☐☐☐090C32633.6801.4664846535.5-1.00.2
82E84AV☐☐☐4024☐☐0GFL14-3M☐☐☐090C32710.8881.2745852204.9-0.80.2
82E84AV☐☐☐4024☐☐0GFL14-3M☐☐☐090C32801.0001.1840358824.3-0.80.2
Lenze | V02-en_GB-03/20146.6 - 60
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 5.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.9 ... 3525 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐5524☐☐0GFL05-2M☐☐☐100C126.4001.49365551-9423
74E84AV☐☐☐5524☐☐0GFL06-2M☐☐☐100C126.4502.89365547-9323
74E84AV☐☐☐5524☐☐0GFL05-2M☐☐☐100C129.0101.513091391-6716
74E84AV☐☐☐5524☐☐0GFL05-2M☐☐☐100C129.9461.4144101354-6015
74E84AV☐☐☐5524☐☐0GFL06-2M☐☐☐100C1210.0922.4146102349-6015
74E84AV☐☐☐5524☐☐0GFL05-2M☐☐☐100C1214.5381.1210147243-4110
74E84AV☐☐☐5524☐☐0GFL06-2M☐☐☐100C1214.7432.3213149239-4110
74E84AV☐☐☐5524☐☐0GFL05-2M☐☐☐100C1215.9041.0230161222-389.2
74E84AV☐☐☐5524☐☐0GFL06-2M☐☐☐100C1216.1282.1233163219-379.1
74E84AV☐☐☐5524☐☐0GFL05-2M☐☐☐100C1217.9200.9259181197-348.2
74E84AV☐☐☐5524☐☐0GFL06-2M☐☐☐100C1218.1691.7263184194-338.1
74E84AV☐☐☐5524☐☐0GFL07-2M☐☐☐100C1220.2863.2293205174-307.2
74E84AV☐☐☐5524☐☐0GFL06-2M☐☐☐100C1220.5711.6297208171-297.1
74E84AV☐☐☐5524☐☐0GFL07-2M☐☐☐100C1222.8572.8330231154-266.4
74E84AV☐☐☐5524☐☐0GFL06-2M☐☐☐100C1223.1751.4335235152-266.3
74E84AV☐☐☐5524☐☐0GFL07-2M☐☐☐100C1224.8503.2359252142-245.9
74E84AV☐☐☐5524☐☐0GFL06-2M☐☐☐100C1225.2001.5364255140-245.8
74E84AV☐☐☐5524☐☐0GFL07-2M☐☐☐100C1228.0002.6405283126-215.3
74E84AV☐☐☐5524☐☐0GFL06-2M☐☐☐100C1228.3891.3410287124-215.2
74E84AV☐☐☐5524☐☐0GFL07-2M☐☐☐100C1232.3442.5468327109-194.5
74E84AV☐☐☐5524☐☐0GFL06-2M☐☐☐100C1232.8001.2474332108-184.5
74E84AV☐☐☐5524☐☐0GFL07-2M☐☐☐100C1236.4442.052736997-174.0
74E84AV☐☐☐5524☐☐0GFL06-2M☐☐☐100C1236.9511.053437495-164.0
74E84AV☐☐☐5524☐☐0GFL07-2M☐☐☐100C1239.6422.157340189-153.7
74E84AV☐☐☐5524☐☐0GFL09-2M☐☐☐100C1239.6672.957440189-153.7
74E84AV☐☐☐5524☐☐0GFL06-2M☐☐☐100C1240.8001.059041386-153.6
74E84AV☐☐☐5524☐☐0GFL07-2M☐☐☐100C1244.6671.764645279-133.3
74E84AV☐☐☐5524☐☐0GFL09-2M☐☐☐100C1244.7042.964645279-133.3
74E84AV☐☐☐5524☐☐0GFL09-2M☐☐☐100C1251.3332.374252069-122.9
74E84AV☐☐☐5524☐☐0GFL07-2M☐☐☐100C1252.0671.575352768-122.8
74E84AV☐☐☐5524☐☐0GFL11-2M☐☐☐100C1252.0672.975352768-122.8
74E84AV☐☐☐5524☐☐0GFL09-2M☐☐☐100C1257.8522.383658661-102.5
74E84AV☐☐☐5524☐☐0GFL07-2M☐☐☐100C1258.6671.384859460-102.5
74E84AV☐☐☐5524☐☐0GFL11-2M☐☐☐100C1258.6672.984859460-102.5
74E84AV☐☐☐5524☐☐0GFL09-2M☐☐☐100C1262.3001.990163157-9.62.4
74E84AV☐☐☐5524☐☐0GFL07-2M☐☐☐100C1263.1901.291464056-9.52.3
82E84AV☐☐☐5524☐☐0GFL09-3M☐☐☐100C1263.3261.490263156-9.52.3
74E84AV☐☐☐5524☐☐0GFL11-2M☐☐☐100C1263.1902.491464056-9.52.3
82E84AV☐☐☐5524☐☐0GFL11-3M☐☐☐100C1265.3062.993065154-9.22.3
74E84AV☐☐☐5524☐☐0GFL07-2M☐☐☐100C1271.2001.2102972150-8.42.1
74E84AV☐☐☐5524☐☐0GFL09-2M☐☐☐100C1270.2112.1101571150-8.62.1
6.6 - 61Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 5.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.9 ... 3525 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐5524☐☐0GFL11-2M☐☐☐100C1271.2002.7102972150-8.42.1
82E84AV☐☐☐5524☐☐0GFL09-3M☐☐☐100C1273.1731.4104272948-8.22.0
82E84AV☐☐☐5524☐☐0GFL11-3M☐☐☐100C1273.3352.6104473148-8.22.0
74E84AV☐☐☐5524☐☐0GFL09-2M☐☐☐100C1278.7501.4113979745-7.61.9
74E84AV☐☐☐5524☐☐0GFL11-2M☐☐☐100C1279.8752.2115580844-7.51.8
82E84AV☐☐☐5524☐☐0GFL09-3M☐☐☐100C1282.4651.4117482243-7.31.8
82E84AV☐☐☐5524☐☐0GFL11-3M☐☐☐100C1282.6312.6117782443-7.31.8
74E84AV☐☐☐5524☐☐0GFL09-2M☐☐☐100C1288.7501.3128389840-6.81.7
74E84AV☐☐☐5524☐☐0GFL11-2M☐☐☐100C1290.0002.2130191139-6.71.6
82E84AV☐☐☐5524☐☐0GFL09-3M☐☐☐100C1293.3331.2132993038-6.41.6
82E84AV☐☐☐5524☐☐0GFL11-3M☐☐☐100C1293.5402.3133293238-6.41.6
82E84AV☐☐☐5524☐☐0GFL09-3M☐☐☐100C12105.1851.21498104934-5.71.4
82E84AV☐☐☐5524☐☐0GFL11-3M☐☐☐100C12105.3972.31501105133-5.71.4
82E84AV☐☐☐5524☐☐0GFL09-3M☐☐☐100C12114.3331.11628114031-5.31.3
82E84AV☐☐☐5524☐☐0GFL11-3M☐☐☐100C12114.5862.01632114231-5.21.3
82E84AV☐☐☐5524☐☐0GFL09-3M☐☐☐100C12128.8521.11835128427-4.71.1
82E84AV☐☐☐5524☐☐0GFL11-3M☐☐☐100C12129.1112.01839128727-4.71.1
82E84AV☐☐☐5524☐☐0GFL09-3M☐☐☐100C12148.8150.92119148324-4.01.0
82E84AV☐☐☐5524☐☐0GFL11-3M☐☐☐100C12149.1441.72124148724-4.01.0
82E84AV☐☐☐5524☐☐0GFL14-3M☐☐☐100C12156.1483.22224155723-3.80.9
82E84AV☐☐☐5524☐☐0GFL09-3M☐☐☐100C12167.7120.92388167221-3.60.9
82E84AV☐☐☐5524☐☐0GFL11-3M☐☐☐100C12168.0491.72393167521-3.60.9
82E84AV☐☐☐5524☐☐0GFL11-3M☐☐☐100C12182.7921.52603182219-3.30.8
82E84AV☐☐☐5524☐☐0GFL11-3M☐☐☐100C12205.9631.52933205317-2.90.7
82E84AV☐☐☐5524☐☐0GFL14-3M☐☐☐100C12202.0742.62878201417-3.00.7
82E84AV☐☐☐5524☐☐0GFL11-3M☐☐☐100C12224.6361.33199223916-2.70.7
82E84AV☐☐☐5524☐☐0GFL14-3M☐☐☐100C12224.6362.63199223916-2.70.7
82E84AV☐☐☐5524☐☐0GFL11-3M☐☐☐100C12253.1111.33604252314-2.40.6
82E84AV☐☐☐5524☐☐0GFL14-3M☐☐☐100C12253.1112.63604252314-2.40.6
82E84AV☐☐☐5524☐☐0GFL11-3M☐☐☐100C12267.2591.33806266413-2.30.6
82E84AV☐☐☐5524☐☐0GFL14-3M☐☐☐100C12273.7782.43899272913-2.20.5
82E84AV☐☐☐5524☐☐0GFL11-3M☐☐☐100C12327.5561.14665326511-1.80.5
82E84AV☐☐☐5524☐☐0GFL14-3M☐☐☐100C12332.4442.14734331411-1.80.4
82E84AV☐☐☐5524☐☐0GFL14-3M☐☐☐100C12352.8112.05024351710-1.70.4
82E84AV☐☐☐5524☐☐0GFL11-3M☐☐☐100C12358.0771.0509935699.8-1.70.4
82E84AV☐☐☐5524☐☐0GFL14-3M☐☐☐100C12397.5331.9566139638.9-1.50.4
82E84AV☐☐☐5524☐☐0GFL11-3M☐☐☐100C12403.4671.0574540228.7-1.50.4
82E84AV☐☐☐5524☐☐0GFL11-3M☐☐☐100C12430.2220.9612642898.2-1.40.3
82E84AV☐☐☐5524☐☐0GFL14-3M☐☐☐100C12430.2221.6612642898.2-1.40.3
82E84AV☐☐☐5524☐☐0GFL14-3M☐☐☐100C12522.1331.3743552056.8-1.20.3
82E84AV☐☐☐5524☐☐0GFL14-3M☐☐☐100C12562.3911.1800956066.3-1.10.3
Lenze | V02-en_GB-03/20146.6 - 62
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 5.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.9 ... 3525 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
82E84AV☐☐☐5524☐☐0GFL14-3M☐☐☐100C12633.6801.0902463175.6-1.00.2
6.6 - 63Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 7.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.5 ... 3515 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐7524☐☐0GFL05-2M☐☐☐100C326.4001.012789549-9423
74E84AV☐☐☐7524☐☐0GFL07-2M☐☐☐100C326.4003.012789549-9423
74E84AV☐☐☐7524☐☐0GFL06-2M☐☐☐100C326.4502.112889545-9323
74E84AV☐☐☐7524☐☐0GFL05-2M☐☐☐100C329.0101.1178125390-6716
74E84AV☐☐☐7524☐☐0GFL07-2M☐☐☐100C329.7143.1192134362-6215
74E84AV☐☐☐7524☐☐0GFL05-2M☐☐☐100C329.9461.1197138353-6015
74E84AV☐☐☐7524☐☐0GFL06-2M☐☐☐100C3210.0921.7200140348-6015
74E84AV☐☐☐7524☐☐0GFL07-2M☐☐☐100C3214.2003.1281197248-4210
74E84AV☐☐☐7524☐☐0GFL06-2M☐☐☐100C3214.7431.7292204238-419.9
74E84AV☐☐☐7524☐☐0GFL07-2M☐☐☐100C3215.9042.8314220221-389.2
74E84AV☐☐☐7524☐☐0GFL06-2M☐☐☐100C3216.1281.5319223218-379.1
74E84AV☐☐☐7524☐☐0GFL07-2M☐☐☐100C3217.9202.5354248196-348.2
74E84AV☐☐☐7524☐☐0GFL06-2M☐☐☐100C3218.1691.3359251194-338.1
74E84AV☐☐☐7524☐☐0GFL09-2M☐☐☐100C3219.6673.1389272179-317.5
74E84AV☐☐☐7524☐☐0GFL07-2M☐☐☐100C3220.2862.4401281173-307.2
74E84AV☐☐☐7524☐☐0GFL06-2M☐☐☐100C3220.5711.2407285171-297.1
74E84AV☐☐☐7524☐☐0GFL09-2M☐☐☐100C3222.1643.1438307159-276.6
74E84AV☐☐☐7524☐☐0GFL07-2M☐☐☐100C3222.8572.1452316154-266.4
74E84AV☐☐☐7524☐☐0GFL06-2M☐☐☐100C3223.1751.0458321152-266.3
74E84AV☐☐☐7524☐☐0GFL07-2M☐☐☐100C3224.8502.3491344141-245.9
74E84AV☐☐☐7524☐☐0GFL06-2M☐☐☐100C3225.2001.1498349140-245.8
74E84AV☐☐☐7524☐☐0GFL07-2M☐☐☐100C3228.0001.9554388126-215.2
74E84AV☐☐☐7524☐☐0GFL06-2M☐☐☐100C3228.3890.9561393124-215.2
74E84AV☐☐☐7524☐☐0GFL07-2M☐☐☐100C3232.3441.8640448109-194.5
74E84AV☐☐☐7524☐☐0GFL09-2M☐☐☐100C3232.6672.5646452108-184.5
74E84AV☐☐☐7524☐☐0GFL07-2M☐☐☐100C3236.4441.572150496-174.0
74E84AV☐☐☐7524☐☐0GFL09-2M☐☐☐100C3236.8152.572851096-164.0
74E84AV☐☐☐7524☐☐0GFL07-2M☐☐☐100C3239.6421.578454989-153.7
74E84AV☐☐☐7524☐☐0GFL09-2M☐☐☐100C3239.6672.178454989-153.7
74E84AV☐☐☐7524☐☐0GFL07-2M☐☐☐100C3244.6671.288361879-133.3
74E84AV☐☐☐7524☐☐0GFL09-2M☐☐☐100C3244.7042.188461979-133.3
74E84AV☐☐☐7524☐☐0GFL09-2M☐☐☐100C3251.3331.7101571069-122.9
74E84AV☐☐☐7524☐☐0GFL07-2M☐☐☐100C3252.0671.1102972168-122.8
74E84AV☐☐☐7524☐☐0GFL11-2M☐☐☐100C3252.0672.1102972168-122.8
74E84AV☐☐☐7524☐☐0GFL09-2M☐☐☐100C3257.8521.7114480161-102.5
74E84AV☐☐☐7524☐☐0GFL07-2M☐☐☐100C3258.6670.9116081260-102.5
74E84AV☐☐☐7524☐☐0GFL11-2M☐☐☐100C3258.6672.1116081260-102.5
82E84AV☐☐☐7524☐☐0GFL09-3M☐☐☐100C3263.3261.0123386356-9.52.3
74E84AV☐☐☐7524☐☐0GFL09-2M☐☐☐100C3262.3001.4123286256-9.62.4
74E84AV☐☐☐7524☐☐0GFL11-2M☐☐☐100C3263.1901.8124987556-9.52.3
82E84AV☐☐☐7524☐☐0GFL11-3M☐☐☐100C3265.3062.2127289054-9.22.2
Lenze | V02-en_GB-03/20146.6 - 64
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 7.50 kW
n22/n2 = 1 ... 24.0
n1 = 146.5 ... 3515 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐7524☐☐0GFL09-2M☐☐☐100C3270.2111.6138897250-8.62.1
74E84AV☐☐☐7524☐☐0GFL11-2M☐☐☐100C3271.2002.0140898549-8.42.1
82E84AV☐☐☐7524☐☐0GFL09-3M☐☐☐100C3273.1731.0142599848-8.22.0
82E84AV☐☐☐7524☐☐0GFL11-3M☐☐☐100C3273.3351.91428100048-8.22.0
74E84AV☐☐☐7524☐☐0GFL09-2M☐☐☐100C3278.7501.01557109045-7.61.9
74E84AV☐☐☐7524☐☐0GFL11-2M☐☐☐100C3279.8751.61579110544-7.51.8
82E84AV☐☐☐7524☐☐0GFL09-3M☐☐☐100C3282.4651.01606112443-7.31.8
82E84AV☐☐☐7524☐☐0GFL11-3M☐☐☐100C3282.6311.91609112643-7.31.8
74E84AV☐☐☐7524☐☐0GFL09-2M☐☐☐100C3288.7501.01755122840-6.81.7
74E84AV☐☐☐7524☐☐0GFL11-2M☐☐☐100C3290.0001.61779124639-6.71.6
82E84AV☐☐☐7524☐☐0GFL11-3M☐☐☐100C3293.5401.71822127538-6.41.6
82E84AV☐☐☐7524☐☐0GFL14-3M☐☐☐100C32104.8892.72043143034-5.71.4
82E84AV☐☐☐7524☐☐0GFL11-3M☐☐☐100C32105.3971.72053143733-5.71.4
82E84AV☐☐☐7524☐☐0GFL11-3M☐☐☐100C32114.5861.52231156231-5.21.3
82E84AV☐☐☐7524☐☐0GFL14-3M☐☐☐100C32114.1262.72223155631-5.31.3
82E84AV☐☐☐7524☐☐0GFL11-3M☐☐☐100C32129.1111.52514176027-4.71.1
82E84AV☐☐☐7524☐☐0GFL14-3M☐☐☐100C32128.5932.72504175327-4.71.1
82E84AV☐☐☐7524☐☐0GFL11-3M☐☐☐100C32149.1441.32904203324-4.01.0
82E84AV☐☐☐7524☐☐0GFL14-3M☐☐☐100C32156.1482.33041212923-3.80.9
82E84AV☐☐☐7524☐☐0GFL11-3M☐☐☐100C32168.0491.33273229121-3.60.9
82E84AV☐☐☐7524☐☐0GFL14-3M☐☐☐100C32170.0742.43312231821-3.50.9
82E84AV☐☐☐7524☐☐0GFL11-3M☐☐☐100C32182.7921.13560249219-3.30.8
82E84AV☐☐☐7524☐☐0GFL11-3M☐☐☐100C32205.9631.14011280817-2.90.7
82E84AV☐☐☐7524☐☐0GFL14-3M☐☐☐100C32202.0741.93935275517-3.00.7
82E84AV☐☐☐7524☐☐0GFL11-3M☐☐☐100C32224.6361.04375306216-2.70.7
82E84AV☐☐☐7524☐☐0GFL14-3M☐☐☐100C32224.6361.94375306216-2.70.7
82E84AV☐☐☐7524☐☐0GFL11-3M☐☐☐100C32253.1111.04929345014-2.40.6
82E84AV☐☐☐7524☐☐0GFL14-3M☐☐☐100C32253.1111.94929345014-2.40.6
82E84AV☐☐☐7524☐☐0GFL11-3M☐☐☐100C32267.2590.95205364313-2.30.6
82E84AV☐☐☐7524☐☐0GFL14-3M☐☐☐100C32273.7781.75332373213-2.20.5
82E84AV☐☐☐7524☐☐0GFL14-3M☐☐☐100C32332.4441.56474453211-1.80.4
82E84AV☐☐☐7524☐☐0GFL14-3M☐☐☐100C32352.8111.46871480910-1.70.4
82E84AV☐☐☐7524☐☐0GFL14-3M☐☐☐100C32397.5331.4774154198.8-1.50.4
82E84AV☐☐☐7524☐☐0GFL14-3M☐☐☐100C32430.2221.2837858658.2-1.40.3
82E84AV☐☐☐7524☐☐0GFL14-3M☐☐☐100C32522.1331.01016871186.7-1.20.3
6.6 - 65Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 11.00 kW
n22/n2 = 1 ... 24.0
n1 = 147.1 ... 3530 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐1134☐☐0GFL07-2M☐☐☐112C226.4002.3185118552-9423
74E84AV☐☐☐1134☐☐0GFL06-2M☐☐☐112C226.4501.4186119547-9323
74E84AV☐☐☐1134☐☐0GFL09-2M☐☐☐112C229.0103.2260167392-6716
74E84AV☐☐☐1134☐☐0GFL07-2M☐☐☐112C229.7142.4281180363-6215
74E84AV☐☐☐1134☐☐0GFL09-2M☐☐☐112C229.7993.2283181360-6115
74E84AV☐☐☐1134☐☐0GFL06-2M☐☐☐112C2210.0921.2291187350-6015
74E84AV☐☐☐1134☐☐0GFL09-2M☐☐☐112C2211.1672.9322206316-5413
74E84AV☐☐☐1134☐☐0GFL07-2M☐☐☐112C2214.2002.1410262249-4210
74E84AV☐☐☐1134☐☐0GFL09-2M☐☐☐112C2214.3333.2414265246-4210
74E84AV☐☐☐1134☐☐0GFL06-2M☐☐☐112C2214.7431.1426272239-4110
74E84AV☐☐☐1134☐☐0GFL07-2M☐☐☐112C2215.9041.9459294222-389.3
74E84AV☐☐☐1134☐☐0GFL06-2M☐☐☐112C2216.1281.0466298219-379.1
74E84AV☐☐☐1134☐☐0GFL09-2M☐☐☐112C2216.3332.9472302216-379.0
74E84AV☐☐☐1134☐☐0GFL07-2M☐☐☐112C2217.9201.7517331197-348.2
74E84AV☐☐☐1134☐☐0GFL09-2M☐☐☐112C2218.4072.9532340192-338.0
74E84AV☐☐☐1134☐☐0GFL09-2M☐☐☐112C2219.6672.5568363180-317.5
74E84AV☐☐☐1134☐☐0GFL07-2M☐☐☐112C2220.2861.6586375174-307.3
74E84AV☐☐☐1134☐☐0GFL11-2M☐☐☐112C2220.2863.1586375174-307.3
74E84AV☐☐☐1134☐☐0GFL09-2M☐☐☐112C2222.1642.5640410159-276.6
74E84AV☐☐☐1134☐☐0GFL07-2M☐☐☐112C2222.8571.4660422154-266.4
74E84AV☐☐☐1134☐☐0GFL11-2M☐☐☐112C2222.8573.1660422154-266.4
74E84AV☐☐☐1134☐☐0GFL09-2M☐☐☐112C2224.1112.5696446146-256.1
74E84AV☐☐☐1134☐☐0GFL07-2M☐☐☐112C2224.8501.6718459142-245.9
74E84AV☐☐☐1134☐☐0GFL09-2M☐☐☐112C2227.1732.5785502130-225.4
74E84AV☐☐☐1134☐☐0GFL07-2M☐☐☐112C2228.0001.3808517126-215.3
74E84AV☐☐☐1134☐☐0GFL07-2M☐☐☐112C2232.3441.3934598109-194.6
74E84AV☐☐☐1134☐☐0GFL09-2M☐☐☐112C2232.6671.9943604108-184.5
74E84AV☐☐☐1134☐☐0GFL11-2M☐☐☐112C2232.7392.5945605108-184.5
74E84AV☐☐☐1134☐☐0GFL07-2M☐☐☐112C2236.4441.0105267397-174.0
74E84AV☐☐☐1134☐☐0GFL09-2M☐☐☐112C2236.8151.9106368096-164.0
74E84AV☐☐☐1134☐☐0GFL11-2M☐☐☐112C2236.8892.5106568296-164.0
74E84AV☐☐☐1134☐☐0GFL07-2M☐☐☐112C2239.6421.0114573389-153.7
74E84AV☐☐☐1134☐☐0GFL09-2M☐☐☐112C2239.6671.7114573389-153.7
74E84AV☐☐☐1134☐☐0GFL11-2M☐☐☐112C2240.2332.1116274488-153.7
74E84AV☐☐☐1134☐☐0GFL09-2M☐☐☐112C2244.7041.7129182679-133.3
74E84AV☐☐☐1134☐☐0GFL11-2M☐☐☐112C2245.3332.1130983878-133.2
74E84AV☐☐☐1134☐☐0GFL09-2M☐☐☐112C2251.3331.3148294969-122.9
74E84AV☐☐☐1134☐☐0GFL11-2M☐☐☐112C2252.0671.6150396268-122.8
74E84AV☐☐☐1134☐☐0GFL14-2M☐☐☐112C2252.0672.0150396268-122.8
74E84AV☐☐☐1134☐☐0GFL09-2M☐☐☐112C2257.8521.31670106961-102.5
74E84AV☐☐☐1134☐☐0GFL11-2M☐☐☐112C2258.6671.61694108460-102.5
Lenze | V02-en_GB-03/20146.6 - 66
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 11.00 kW
n22/n2 = 1 ... 24.0
n1 = 147.1 ... 3530 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐1134☐☐0GFL14-2M☐☐☐112C2258.6672.01694108460-102.5
74E84AV☐☐☐1134☐☐0GFL09-2M☐☐☐112C2262.3001.11799115157-9.62.4
74E84AV☐☐☐1134☐☐0GFL11-2M☐☐☐112C2263.1901.41825116856-9.52.3
74E84AV☐☐☐1134☐☐0GFL14-2M☐☐☐112C2263.1901.71825116856-9.52.3
82E84AV☐☐☐1134☐☐0GFL14-3M☐☐☐112C2264.2962.61829117055-9.32.3
82E84AV☐☐☐1134☐☐0GFL11-3M☐☐☐112C2265.3061.51857118954-9.22.3
82E84AV☐☐☐1134☐☐0GFL14-3M☐☐☐112C2268.7082.61954125151-8.72.1
74E84AV☐☐☐1134☐☐0GFL09-2M☐☐☐112C2270.2111.22027129750-8.62.1
74E84AV☐☐☐1134☐☐0GFL11-2M☐☐☐112C2271.2001.52056131650-8.42.1
74E84AV☐☐☐1134☐☐0GFL14-2M☐☐☐112C2271.2001.92056131650-8.42.1
82E84AV☐☐☐1134☐☐0GFL11-3M☐☐☐112C2273.3351.32086133548-8.22.0
82E84AV☐☐☐1134☐☐0GFL14-3M☐☐☐112C2277.4182.62202140946-7.81.9
74E84AV☐☐☐1134☐☐0GFL11-2M☐☐☐112C2279.8751.22306147644-7.51.8
74E84AV☐☐☐1134☐☐0GFL14-2M☐☐☐112C2279.8751.52306147644-7.51.8
82E84AV☐☐☐1134☐☐0GFL11-3M☐☐☐112C2282.6311.32350150443-7.31.8
82E84AV☐☐☐1134☐☐0GFL14-3M☐☐☐112C2285.0372.52419154842-7.11.7
74E84AV☐☐☐1134☐☐0GFL11-2M☐☐☐112C2290.0001.22599166339-6.71.6
74E84AV☐☐☐1134☐☐0GFL14-2M☐☐☐112C2290.0001.52599166339-6.71.6
82E84AV☐☐☐1134☐☐0GFL11-3M☐☐☐112C2293.5401.12660170338-6.41.6
82E84AV☐☐☐1134☐☐0GFL11-3M☐☐☐112C22105.3971.12998191834-5.71.4
82E84AV☐☐☐1134☐☐0GFL14-3M☐☐☐112C22104.8892.12983190934-5.71.4
82E84AV☐☐☐1134☐☐0GFL11-3M☐☐☐112C22114.5861.03259208631-5.21.3
82E84AV☐☐☐1134☐☐0GFL14-3M☐☐☐112C22114.1262.03246207731-5.31.3
82E84AV☐☐☐1134☐☐0GFL14-3M☐☐☐112C22128.5932.03657234128-4.71.1
82E84AV☐☐☐1134☐☐0GFL11-3M☐☐☐112C22129.1111.03672235027-4.71.1
82E84AV☐☐☐1134☐☐0GFL14-3M☐☐☐112C22136.8891.83893249226-4.41.1
82E84AV☐☐☐1134☐☐0GFL14-3M☐☐☐112C22156.1481.84441284223-3.80.9
82E84AV☐☐☐1134☐☐0GFL14-3M☐☐☐112C22170.0741.64837309621-3.50.9
82E84AV☐☐☐1134☐☐0GFL14-3M☐☐☐112C22202.0741.55747367818-3.00.7
82E84AV☐☐☐1134☐☐0GFL14-3M☐☐☐112C22224.6361.36389408916-2.70.7
82E84AV☐☐☐1134☐☐0GFL14-3M☐☐☐112C22253.1111.37199460714-2.40.6
82E84AV☐☐☐1134☐☐0GFL14-3M☐☐☐112C22273.7781.27786498313-2.20.5
82E84AV☐☐☐1134☐☐0GFL14-3M☐☐☐112C22332.4441.19455605111-1.80.4
82E84AV☐☐☐1134☐☐0GFL14-3M☐☐☐112C22352.8111.010034642210-1.70.4
82E84AV☐☐☐1134☐☐0GFL14-3M☐☐☐112C22397.5331.01130672368.9-1.50.4
6.6 - 67Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 15.00 kW
n22/n2 = 1 ... 24.0
n1 = 148.3 ... 3560 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐1534☐☐0GFL07-2M☐☐☐132C126.4002.0250160556-9423
74E84AV☐☐☐1534☐☐0GFL09-2M☐☐☐132C129.0104.3352225395-6717
74E84AV☐☐☐1534☐☐0GFL07-2M☐☐☐132C129.7141.9379243367-6215
74E84AV☐☐☐1534☐☐0GFL09-2M☐☐☐132C1211.1674.0436279319-5413
74E84AV☐☐☐1534☐☐0GFL07-2M☐☐☐132C1214.2001.5554355251-4210
74E84AV☐☐☐1534☐☐0GFL09-2M☐☐☐132C1214.3333.2560358248-4210
74E84AV☐☐☐1534☐☐0GFL07-2M☐☐☐132C1215.9041.4621397224-389.3
74E84AV☐☐☐1534☐☐0GFL09-2M☐☐☐132C1216.3332.9638408218-379.1
74E84AV☐☐☐1534☐☐0GFL07-2M☐☐☐132C1217.9201.3700448199-348.3
74E84AV☐☐☐1534☐☐0GFL09-2M☐☐☐132C1218.4072.6719460193-338.1
74E84AV☐☐☐1534☐☐0GFL09-2M☐☐☐132C1219.6672.5768491181-317.5
74E84AV☐☐☐1534☐☐0GFL07-2M☐☐☐132C1220.2861.2792507176-307.3
74E84AV☐☐☐1534☐☐0GFL09-2M☐☐☐132C1222.1642.3865554161-276.7
74E84AV☐☐☐1534☐☐0GFL07-2M☐☐☐132C1222.8571.0892571156-266.5
74E84AV☐☐☐1534☐☐0GFL09-2M☐☐☐132C1224.1112.5941602148-256.2
74E84AV☐☐☐1534☐☐0GFL07-2M☐☐☐132C1224.8501.2970621143-246.0
74E84AV☐☐☐1534☐☐0GFL09-2M☐☐☐132C1227.1732.21061679131-225.5
74E84AV☐☐☐1534☐☐0GFL07-2M☐☐☐132C1228.0001.01093700127-215.3
74E84AV☐☐☐1534☐☐0GFL09-2M☐☐☐132C1232.6672.01275816109-184.5
74E84AV☐☐☐1534☐☐0GFL11-2M☐☐☐132C1232.7393.11278818109-184.5
74E84AV☐☐☐1534☐☐0GFL09-2M☐☐☐132C1236.8151.8143792097-164.0
74E84AV☐☐☐1534☐☐0GFL11-2M☐☐☐132C1236.8892.7144092297-164.0
74E84AV☐☐☐1534☐☐0GFL09-2M☐☐☐132C1239.6671.7154999190-153.7
74E84AV☐☐☐1534☐☐0GFL11-2M☐☐☐132C1240.2332.61571100589-153.7
74E84AV☐☐☐1534☐☐0GFL09-2M☐☐☐132C1244.7041.51745111780-133.3
74E84AV☐☐☐1534☐☐0GFL11-2M☐☐☐132C1245.3332.31770113379-133.3
74E84AV☐☐☐1534☐☐0GFL11-2M☐☐☐132C1252.0672.22033130168-122.9
74E84AV☐☐☐1534☐☐0GFL14-2M☐☐☐132C1252.0673.22033130168-122.9
74E84AV☐☐☐1534☐☐0GFL11-2M☐☐☐132C1258.6672.02290146661-102.5
74E84AV☐☐☐1534☐☐0GFL14-2M☐☐☐132C1258.6673.22290146661-102.5
74E84AV☐☐☐1534☐☐0GFL11-2M☐☐☐132C1263.1901.92467157956-9.52.4
74E84AV☐☐☐1534☐☐0GFL14-2M☐☐☐132C1263.1902.72467157956-9.52.4
82E84AV☐☐☐1534☐☐0GFL11-3M☐☐☐132C1265.3061.12511160755-9.22.3
82E84AV☐☐☐1534☐☐0GFL14-3M☐☐☐132C1264.2961.92473158255-9.32.3
82E84AV☐☐☐1534☐☐0GFL14-3M☐☐☐132C1268.7081.92642169152-8.72.2
74E84AV☐☐☐1534☐☐0GFL11-2M☐☐☐132C1271.2001.92780177950-8.42.1
74E84AV☐☐☐1534☐☐0GFL14-2M☐☐☐132C1271.2003.02780177950-8.42.1
82E84AV☐☐☐1534☐☐0GFL11-3M☐☐☐132C1273.3351.02820180549-8.22.0
82E84AV☐☐☐1534☐☐0GFL14-3M☐☐☐132C1277.4181.92977190546-7.81.9
74E84AV☐☐☐1534☐☐0GFL14-2M☐☐☐132C1279.8752.13118199645-7.51.9
82E84AV☐☐☐1534☐☐0GFL11-3M☐☐☐132C1282.6311.03178203443-7.31.8
Lenze | V02-en_GB-03/20146.6 - 68
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 15.00 kW
n22/n2 = 1 ... 24.0
n1 = 148.3 ... 3560 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
82E84AV☐☐☐1534☐☐0GFL14-3M☐☐☐132C1285.0371.83270209342-7.11.7
74E84AV☐☐☐1534☐☐0GFL14-2M☐☐☐132C1290.0002.13514224940-6.71.7
82E84AV☐☐☐1534☐☐0GFL14-3M☐☐☐132C12104.8891.64034258134-5.71.4
82E84AV☐☐☐1534☐☐0GFL14-3M☐☐☐132C12114.1261.44389280931-5.31.3
82E84AV☐☐☐1534☐☐0GFL14-3M☐☐☐132C12128.5931.44945316528-4.71.2
82E84AV☐☐☐1534☐☐0GFL14-3M☐☐☐132C12136.8891.35264336926-4.41.1
82E84AV☐☐☐1534☐☐0GFL14-3M☐☐☐132C12156.1481.36005384323-3.81.0
82E84AV☐☐☐1534☐☐0GFL14-3M☐☐☐132C12170.0741.26540418621-3.50.9
82E84AV☐☐☐1534☐☐0GFL14-3M☐☐☐132C12224.6361.08638552916-2.70.7
82E84AV☐☐☐1534☐☐0GFL14-3M☐☐☐132C12253.1111.09733622914-2.40.6
6.6 - 69Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 18.50 kW
n22/n2 = 1 ... 24.0
n1 = 148.3 ... 3560 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐1834☐☐0GFL07-2M☐☐☐132C226.4001.6308197556-9423
74E84AV☐☐☐1834☐☐0GFL09-2M☐☐☐132C229.0103.5434278395-6717
74E84AV☐☐☐1834☐☐0GFL07-2M☐☐☐132C229.7141.6468299367-6215
74E84AV☐☐☐1834☐☐0GFL09-2M☐☐☐132C2211.1673.2538344319-5413
74E84AV☐☐☐1834☐☐0GFL07-2M☐☐☐132C2214.2001.3684438251-4210
74E84AV☐☐☐1834☐☐0GFL09-2M☐☐☐132C2214.3332.6690442248-4210
74E84AV☐☐☐1834☐☐0GFL07-2M☐☐☐132C2215.9041.2766490224-389.3
74E84AV☐☐☐1834☐☐0GFL09-2M☐☐☐132C2216.3332.3787503218-379.1
74E84AV☐☐☐1834☐☐0GFL07-2M☐☐☐132C2217.9201.0863552199-348.3
74E84AV☐☐☐1834☐☐0GFL09-2M☐☐☐132C2218.4072.1886567193-338.1
74E84AV☐☐☐1834☐☐0GFL09-2M☐☐☐132C2219.6672.0947606181-317.5
74E84AV☐☐☐1834☐☐0GFL07-2M☐☐☐132C2220.2861.0977625176-307.3
74E84AV☐☐☐1834☐☐0GFL11-2M☐☐☐132C2220.2863.1977625176-307.3
74E84AV☐☐☐1834☐☐0GFL09-2M☐☐☐132C2222.1641.81067683161-276.7
74E84AV☐☐☐1834☐☐0GFL11-2M☐☐☐132C2222.8572.81101704156-266.5
74E84AV☐☐☐1834☐☐0GFL09-2M☐☐☐132C2224.1112.01161743148-256.2
74E84AV☐☐☐1834☐☐0GFL07-2M☐☐☐132C2224.8501.01197766143-246.0
74E84AV☐☐☐1834☐☐0GFL11-2M☐☐☐132C2224.8503.01197766143-246.0
74E84AV☐☐☐1834☐☐0GFL09-2M☐☐☐132C2227.1731.81308837131-225.5
74E84AV☐☐☐1834☐☐0GFL11-2M☐☐☐132C2228.0002.71348863127-215.3
74E84AV☐☐☐1834☐☐0GFL09-2M☐☐☐132C2232.6671.615731007109-184.5
74E84AV☐☐☐1834☐☐0GFL11-2M☐☐☐132C2232.7392.515761009109-184.5
74E84AV☐☐☐1834☐☐0GFL09-2M☐☐☐132C2236.8151.51773113597-164.0
74E84AV☐☐☐1834☐☐0GFL11-2M☐☐☐132C2236.8892.21776113797-164.0
74E84AV☐☐☐1834☐☐0GFL09-2M☐☐☐132C2239.6671.41910122290-153.7
74E84AV☐☐☐1834☐☐0GFL14-2M☐☐☐132C2239.6423.21909122290-153.7
74E84AV☐☐☐1834☐☐0GFL11-2M☐☐☐132C2240.2332.11937124089-153.7
74E84AV☐☐☐1834☐☐0GFL09-2M☐☐☐132C2244.7041.22153137880-133.3
74E84AV☐☐☐1834☐☐0GFL14-2M☐☐☐132C2244.6673.22151137780-133.3
74E84AV☐☐☐1834☐☐0GFL11-2M☐☐☐132C2245.3331.92183139779-133.3
74E84AV☐☐☐1834☐☐0GFL11-2M☐☐☐132C2252.0671.82507160568-122.9
74E84AV☐☐☐1834☐☐0GFL14-2M☐☐☐132C2252.0672.62507160568-122.9
74E84AV☐☐☐1834☐☐0GFL11-2M☐☐☐132C2258.6671.62825180861-102.5
74E84AV☐☐☐1834☐☐0GFL14-2M☐☐☐132C2258.6672.62825180861-102.5
74E84AV☐☐☐1834☐☐0GFL11-2M☐☐☐132C2263.1901.63043194756-9.52.4
74E84AV☐☐☐1834☐☐0GFL14-2M☐☐☐132C2263.1902.23043194756-9.52.4
82E84AV☐☐☐1834☐☐0GFL14-3M☐☐☐132C2264.2961.63049195255-9.32.3
82E84AV☐☐☐1834☐☐0GFL14-3M☐☐☐132C2268.7081.63259208652-8.72.2
74E84AV☐☐☐1834☐☐0GFL11-2M☐☐☐132C2271.2001.53428219450-8.42.1
74E84AV☐☐☐1834☐☐0GFL14-2M☐☐☐132C2271.2002.43428219450-8.42.1
82E84AV☐☐☐1834☐☐0GFL14-3M☐☐☐132C2277.4181.63672235046-7.81.9
Lenze | V02-en_GB-03/20146.6 - 70
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 18.50 kW
n22/n2 = 1 ... 24.0
n1 = 148.3 ... 3560 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐1834☐☐0GFL14-2M☐☐☐132C2279.8751.73846246145-7.51.9
82E84AV☐☐☐1834☐☐0GFL14-3M☐☐☐132C2285.0371.54033258142-7.11.7
74E84AV☐☐☐1834☐☐0GFL14-2M☐☐☐132C2290.0001.74334277340-6.71.7
82E84AV☐☐☐1834☐☐0GFL14-3M☐☐☐132C22104.8891.34975318434-5.71.4
82E84AV☐☐☐1834☐☐0GFL14-3M☐☐☐132C22114.1261.25413346431-5.31.3
82E84AV☐☐☐1834☐☐0GFL14-3M☐☐☐132C22128.5931.26099390328-4.71.2
82E84AV☐☐☐1834☐☐0GFL14-3M☐☐☐132C22136.8891.16492415526-4.41.1
82E84AV☐☐☐1834☐☐0GFL14-3M☐☐☐132C22156.1481.07406474023-3.81.0
82E84AV☐☐☐1834☐☐0GFL14-3M☐☐☐132C22170.0741.08066516221-3.50.9
6.6 - 71Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 22.00 kW
n22/n2 = 1 ... 24.0
n1 = 147.9 ... 3550 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐2234☐☐0GFL07-2M☐☐☐132C326.4001.4368235555-9423
74E84AV☐☐☐2234☐☐0GFL09-2M☐☐☐132C329.0103.0517331394-6716
74E84AV☐☐☐2234☐☐0GFL07-2M☐☐☐132C329.7141.3558357365-6215
74E84AV☐☐☐2234☐☐0GFL09-2M☐☐☐132C329.7993.0563360362-6115
74E84AV☐☐☐2234☐☐0GFL11-2M☐☐☐132C3210.7203.2616394331-5614
74E84AV☐☐☐2234☐☐0GFL09-2M☐☐☐132C3211.1672.7641410318-5413
74E84AV☐☐☐2234☐☐0GFL07-2M☐☐☐132C3214.2001.1815522250-4210
74E84AV☐☐☐2234☐☐0GFL09-2M☐☐☐132C3214.3332.2823527248-4210
74E84AV☐☐☐2234☐☐0GFL07-2M☐☐☐132C3215.9041.0913585223-389.3
74E84AV☐☐☐2234☐☐0GFL11-2M☐☐☐132C3215.9043.1913585223-389.3
74E84AV☐☐☐2234☐☐0GFL09-2M☐☐☐132C3216.3332.0938600217-379.1
74E84AV☐☐☐2234☐☐0GFL11-2M☐☐☐132C3217.9202.81029659198-348.3
74E84AV☐☐☐2234☐☐0GFL09-2M☐☐☐132C3218.4071.81057677193-338.0
74E84AV☐☐☐2234☐☐0GFL09-2M☐☐☐132C3219.6671.71129723181-317.5
74E84AV☐☐☐2234☐☐0GFL11-2M☐☐☐132C3220.2862.61165746175-307.3
74E84AV☐☐☐2234☐☐0GFL09-2M☐☐☐132C3222.1641.51273815160-276.7
74E84AV☐☐☐2234☐☐0GFL11-2M☐☐☐132C3222.8572.31313840155-266.5
74E84AV☐☐☐2234☐☐0GFL09-2M☐☐☐132C3224.1111.71385886147-256.1
74E84AV☐☐☐2234☐☐0GFL11-2M☐☐☐132C3224.8502.61427913143-246.0
74E84AV☐☐☐2234☐☐0GFL09-2M☐☐☐132C3227.1731.51560999131-225.4
74E84AV☐☐☐2234☐☐0GFL11-2M☐☐☐132C3228.0002.316081029127-215.3
74E84AV☐☐☐2234☐☐0GFL14-2M☐☐☐132C3232.3442.918571189110-194.6
74E84AV☐☐☐2234☐☐0GFL09-2M☐☐☐132C3232.6671.418761201109-184.5
74E84AV☐☐☐2234☐☐0GFL11-2M☐☐☐132C3232.7392.118801203108-184.5
74E84AV☐☐☐2234☐☐0GFL14-2M☐☐☐132C3236.4442.92093133997-174.1
74E84AV☐☐☐2234☐☐0GFL09-2M☐☐☐132C3236.8151.22114135396-164.0
74E84AV☐☐☐2234☐☐0GFL11-2M☐☐☐132C3236.8891.92118135696-164.0
74E84AV☐☐☐2234☐☐0GFL09-2M☐☐☐132C3239.6671.22278145890-153.7
74E84AV☐☐☐2234☐☐0GFL14-2M☐☐☐132C3239.6422.72276145790-153.7
74E84AV☐☐☐2234☐☐0GFL11-2M☐☐☐132C3240.2331.82310147988-153.7
74E84AV☐☐☐2234☐☐0GFL14-2M☐☐☐132C3244.6672.72565164280-133.3
74E84AV☐☐☐2234☐☐0GFL09-2M☐☐☐132C3244.7041.02567164379-133.3
74E84AV☐☐☐2234☐☐0GFL11-2M☐☐☐132C3245.3331.62603166678-133.3
74E84AV☐☐☐2234☐☐0GFL11-2M☐☐☐132C3252.0671.52990191368-122.8
74E84AV☐☐☐2234☐☐0GFL14-2M☐☐☐132C3252.0672.22990191368-122.8
74E84AV☐☐☐2234☐☐0GFL11-2M☐☐☐132C3258.6671.33369215661-102.5
74E84AV☐☐☐2234☐☐0GFL14-2M☐☐☐132C3258.6672.23369215661-102.5
74E84AV☐☐☐2234☐☐0GFL11-2M☐☐☐132C3263.1901.33628232256-9.52.3
74E84AV☐☐☐2234☐☐0GFL14-2M☐☐☐132C3263.1901.83628232256-9.52.3
82E84AV☐☐☐2234☐☐0GFL14-3M☐☐☐132C3264.2961.33637232755-9.32.3
82E84AV☐☐☐2234☐☐0GFL14-3M☐☐☐132C3268.7081.33886248752-8.72.2
Lenze | V02-en_GB-03/20146.6 - 72
GFL shaft-mounted helical gearboxesTechnical data
6.6
Selection tables
ƒ 120 Hz: PN = 22.00 kW
n22/n2 = 1 ... 24.0
n1 = 147.9 ... 3550 r/min
icM2M22n2n21n22
[Nm][Nm][r/min][r/min][r/min]
74E84AV☐☐☐2234☐☐0GFL11-2M☐☐☐132C3271.2001.34088261750-8.42.1
74E84AV☐☐☐2234☐☐0GFL14-2M☐☐☐132C3271.2002.04088261750-8.42.1
82E84AV☐☐☐2234☐☐0GFL14-3M☐☐☐132C3277.4181.34379280246-7.81.9
74E84AV☐☐☐2234☐☐0GFL14-2M☐☐☐132C3279.8751.44587293544-7.51.9
82E84AV☐☐☐2234☐☐0GFL14-3M☐☐☐132C3285.0371.24810307842-7.11.7
74E84AV☐☐☐2234☐☐0GFL14-2M☐☐☐132C3290.0001.45168330739-6.71.6
82E84AV☐☐☐2234☐☐0GFL14-3M☐☐☐132C32104.8891.15933379734-5.71.4
82E84AV☐☐☐2234☐☐0GFL14-3M☐☐☐132C32114.1261.06455413131-5.31.3
82E84AV☐☐☐2234☐☐0GFL14-3M☐☐☐132C32128.5931.07273465528-4.71.2
6.6 - 73Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Dimensions
GFL☐☐-2M H☐R
Lenze | V02-en_GB-03/20146.6 - 74
GFL shaft-mounted helical gearboxesTechnical data
6.6
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42132C32258218194176156139123g195176166157150109100MFEMAXX
g1 187158147137132118107MFEMABR403319324274224.5207187MFEMAXXk1265222180145120k2109.5907668735240MFEMABR
Δ k 115102109128MFFMAXX201.5183170181183165170MFFMABR
k354332312GFL04
485435376353333GFL05499498448389366346GFL06
624532531481422GFL07658566565515GFL09699607606GFL11744652GFL14
s6p1p1)o1)k7k6c6a8a7a4a
12.56921414835321412822.512.590.5GFL04
14782521653835161552918.5112.5GFL05
14983152064646201953522140GFL06
181183862565656252404429173GFL07
221494863187070323005037.5220GFL09
261816003959084403756550276.5GFL11
32228740490114100504558065339GFL14
s1f1e1b1a1o1i1tul1ld1d2)
H7+0,2JS9H7
M6x1239075110115115
2.52.5
28.333.3
88
100100
115115
4545
2530
GFL04
M8x14410080118140140
44
33.338.3
810
124124
140140
5050
3035
GFL05
M10x164120100140160160
55
43.348.8
1214
140140
160160
6565
4045
GFL06
M12x185140115165200200
55
53.859.3
1416
175175
200200
7575
5055
GFL07
M16x246175145205240240
55
64.474.9
1820
210210
240240
9595
6070
GFL09
M20x324205170240290290
66
74.985.4
2022
250250
290290
108108
7080
GFL11
M24x3562501702903507106.428305350135100GFL14
k2 !1)
Not suitable for through machine shaft at motor end:2)
GFL04-2M H☐☐ 080C☐☐; d=30GFL05-2M H☐☐ 100C☐☐; d=35GFL06-2M H☐☐ 132C☐☐; d=40/45GFL07-2M H☐☐ 160C☐☐; d=50/55GFL11-2M H☐☐ 225C☐☐; d=80
6.6 - 75Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Dimensions
GFL☐☐-2M HCK
Lenze | V02-en_GB-03/20146.6 - 76
GFL shaft-mounted helical gearboxesTechnical data
6.6
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42132C32258218194176156139123g195176166157150109100MFEMAXX
g1 187158147137132118107MFEMABR403319324274224.5207187MFEMAXXk1265222180145120k2109.5907668735240MFEMABR
Δ k 115102109128MFFMAXX201.5183170181183165170MFFMABR
k387365345GFL04
518468409386366GFL05540539489430407387GFL06
679587586536477GFL07718626625575GFL09759667666GFL11804712GFL14
p1p1)o1)k8a4a
6921414841.812.590.5GFL04
782521654618.5112.5GFL05
9831520655.522140GFL06
11838625672.529173GFL07
14948631877.537.5220GFL09
18160039585.550276.5GFL11
22874049089.565339GFL14
s2f2e2c2b2a2o1i2tul1ld1d2)
j7+0,2JS9H7
4 x 93.513010110160148148
33.533.5
28.333.3
88
100100
115115
4545
2530
GFL04
4 x 11416512130200173173
3333
33.338.3
810
124124
140140
5050
3035
GFL05
4 x 14421515180250201201
4241
43.348.8
1214
140140
160160
6565
4045
GFL06
4 x 144 x 14
44
215265
1517
180230
250300
255255
5555
53.859.3
1416
175175
200200
7575
5055
GFL07
4 x17.5
430018250350300300
6060
64.474.9
1820
210210
240240
9595
6070
GFL09
4 x17.55
5350400
2022
300350
400450
350350
6060
74.985.4
2022
250250
290290
108108
7080
GFL118 x17.58 x17.5
54002235045041060106.428305350135100GFL14
k2 !1)
Not suitable for through machine shaft at motor end:2)
GFL04-2M H☐☐ 080C☐☐; d=30GFL05-2M H☐☐ 100C☐☐; d=35GFL06-2M H☐☐ 132C☐☐; d=40/45GFL07-2M H☐☐ 160C☐☐; d=50/55GFL11-2M H☐☐ 225C☐☐; d=80
6.6 - 77Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Dimensions
GFL☐☐-2M V☐R
Lenze | V02-en_GB-03/20146.6 - 78
GFL shaft-mounted helical gearboxesTechnical data
6.6
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42132C32258218194176156139123g195176166157150109100MFEMAXX
g1 187158147137132118107MFEMABR403319324274224.5207187MFEMAXXk1265222180145120k2109.5907668735240MFEMABR
Δ k 115102109128MFFMAXX201.5183170181183165170MFFMABR
k464404382362GFL04
545495436413393GFL05579578528469446426GFL06
724632631581522GFL07778686685635GFL09859767766GFL11944852GFL14
s6p1p1)o1)k7k6c6a8a7a4a
12.56921414835321412822.512.590.5GFL04
14782521653835161552918.5112.5GFL05
14983152064646201953522140GFL06
181183862565656252404429173GFL07
221494863187070323005037.5220GFL09
261816003959084403756550276.5GFL11
32228740490114100504558065339GFL14
s1f1e1b1a1o1tul2l1ld2d1dd
H7m6k6
M6x1239075110162.528840650M104525GFL04
M8x14410080118196.533845660M104530GFL05
M10x164120100140235.5431263780M166540GFL06
M12x185140115165295.553.514808100M167550GFL07
M16x246175145205355.564181008120M209560GFL09
M20x324205170240444.5852212515160M2010880GFL11
M24x356250170290543.51062816018200M24135100GFL14
k2 !1)
6.6 - 79Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Dimensions
GFL☐☐-2M VCK
Lenze | V02-en_GB-03/20146.6 - 80
GFL shaft-mounted helical gearboxesTechnical data
6.6
132C12112C22100C12090C32080C32071C32063C32132C22100C32080C42071C42063C42132C32258218194176156139123g195176166157150109100MFEMAXX
g1 187158147137132118107MFEMABR403319324274224.5207187MFEMAXXk1265222180145120k2109.5907668735240MFEMABR
Δ k 115102109128MFFMAXX201.5183170181183165170MFFMABR
k497437415395GFL04
578528469446426GFL05620619569510487467GFL06
779687686636577GFL07838746745695GFL09919827826GFL111004912GFL14
p1p1)o1)k8a4a
6921414841.812.590.5GFL04
782521654618.5112.5GFL05
9831520655.522140GFL06
11838625672.529173GFL07
14948631877.537.5220GFL09
18160039585.550276.5GFL11
22874049089.565339GFL14
s2f2e2c2b2a2o1i2tul2l1ld2d1dd
j7m6k6
4 x 93.513010110160195.55028840650M104525GFL04
4 x11
416512130200229.56033845660M104530GFL05
4 x14
421515180250276.580431263780M166540GFL06
4 x144
4215265
1517
180230
250300
350.510053.514808100M167550GFL074 x144 x17.5
430018250350415.512064181008120M209560GFL09
4 x17.55
5350400
2022
300350
400450
504.5160852212515160M2010880GFL118 x17.58 x17.5
540022350450603.52001062816018200M24135100GFL14
k2 !1)
6.6 - 81Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Dimensions
GFL☐☐-3M H☐R
080C32071C42071C32063C32080C42063C42156139123g150109100MFEMAXX
g1 132118107MFEMABR224.5207187MFEMAXXk1145120k2735240MFEMABR
Δ k 128MFFMAXX183165170MFFMABR
k430410GFL05
482460440GFL06526504484GFL07578556536GFL09638GFL11
Lenze | V02-en_GB-03/20146.6 - 82
GFL shaft-mounted helical gearboxesTechnical data
6.6
132C22132C12112C22100C12090C32132C32100C32
258218194176g195176166157MFEMAXX
g1 187158147137MFEMABR403319324274MFEMAXXk1265222180k2109.5907668MFEMABR
Δ k 115102109128MFFMAXX201.5183170181MFFMABR
k586GFL07
688638GFL09841749748698GFL11
920828827777GFL14
s6p1p1)o4o3o2o1)k7k6c6a8a7a4a
147825222.6140.5106.51653835161552954.5112.5GFL05
149831520.2159.51112064646201953558140GFL06
18118386241991352565656252404474173GFL07
2214948627237.51703187070323005093.5220GFL09
2618160033.5284.521639590844037565120276.5GFL11
3222874038339.52714901141005045580154339GFL14
s1f1e1b1a1o1i1tul1ld1d
H7+0,2JS9H7
M8x14410080118140140
44
33.338.3
810
124124
140140
5050
3035
GFL05
M10x164120100140160160
55
43.348.8
1214
140140
160160
6565
4045
GFL06
M12x185140115165200200
55
53.859.3
1416
175175
200200
7575
5055
GFL07
M16x246175145205240240
55
64.474.9
1820
210210
240240
9595
6070
GFL09
M20x324205170240290290
66
74.985.4
2022
250250
290290
108108
7080
GFL11
M24x3562501702903507106.428305350135100GFL14
k2 !1)
6.6 - 83Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Dimensions
GFL☐☐-3M HCK
080C32071C42071C32063C32080C42063C42156139123g150109100MFEMAXX
g1 132118107MFEMABR224.5207187MFEMAXXk1145120k2735240MFEMABR
Δ k 128MFFMAXX183165170MFFMABR
k463443GFL05
523501481GFL06581559539GFL07638616596GFL09698GFL11
Lenze | V02-en_GB-03/20146.6 - 84
GFL shaft-mounted helical gearboxesTechnical data
6.6
132C22132C12112C22100C12090C32132C32100C32
258218194176g195176166157MFEMAXX
g1 187158147137MFEMABR403319324274MFEMAXXk1265222180k2109.5907668MFEMABR
Δ k 115102109128MFFMAXX201.5183170181MFFMABR
k641GFL07
748698GFL09901809808758GFL11
980888887837GFL14
p1p1)o4o3o2o1)k8a4a
7825222.6173.5106.51654654.5112.5GFL05
9831520.2200.511120655.558140GFL06
1183862425413525672.574173GFL07
14948627297.517031877.593.5220GFL09
18160033.5344.521639585.5120276.5GFL11
22874038399.527149089.5154339GFL14
s2f2e2c2b2a2o1i2tul1ld1d
j7+0,2JS9H7
4 x 11416512130200173173
3333
33.338.3
810
124124
140140
5050
3035
GFL05
4 x 14421515180250201201
4241
43.348.8
1214
140140
160160
6565
4045
GFL06
4 x 144 x 14
44
215265
1517
180230
250300
255255
5555
53.859.3
1416
175175
200200
7575
5055
GFL07
4 x17.5
430018250350300300
6060
64.474.9
1820
210210
240240
9595
6070
GFL09
4 x17.55
5350400
2022
300350
400450
350350
6060
74.985.4
2022
250250
290290
108108
7080
GFL118 x17.58 x17.5
54002235045041060106.428305350135100GFL14
k2 !1)
6.6 - 85Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Dimensions
GFL☐☐-3M V☐R
080C32071C42071C32063C32080C42063C42156139123g150109100MFEMAXX
g1 132118107MFEMABR224.5207187MFEMAXXk1145120k2735240MFEMABR
Δ k 128MFFMAXX183165170MFFMABR
k490470GFL05
562540520GFL06626604584GFL07698676656GFL09798GFL11
Lenze | V02-en_GB-03/20146.6 - 86
GFL shaft-mounted helical gearboxesTechnical data
6.6
132C22132C12112C22100C12090C32132C32100C32
258218194176g195176166157MFEMAXX
g1 187158147137MFEMABR403319324274MFEMAXXk1265222180k2109.5907668MFEMABR
Δ k 115102109128MFFMAXX201.5183170181MFFMABR
k686GFL07
808758GFL091001909908858GFL11
112010281027977GFL14
s6p1p1)o4o3o2o1)k7k6c6a8a7a4a
147825222.6200.5106.51653835161552954.5112.5GFL05
149831520.2239.51112064646201953558140GFL06
18118386242991352565656252404474173GFL07
2214948627357.51703187070323005093.5220GFL09
2618160033.5444.521639590844037565120276.5GFL11
3222874038539.52714901141005045580154339GFL14
s1f1e1b1a1o1tul2l1ld2d1dd
H7m6k6
M8x14410080118196.533845660M104530GFL05
M10x164120100140235.5431263780M166540GFL06
M12x185140115165295.553.514808100M167550GFL07
M16x246175145205355.564181008120M209560GFL09
M20x324205170240444.5852212515160M2010880GFL11
M24x356250170290543.51062816018200M24135100GFL14
k2 !1)
6.6 - 87Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Dimensions
GFL☐☐-3M VCK
080C32071C42071C32063C32080C42063C42156139123g150109100MFEMAXX
g1 132118107MFEMABR224.5207187MFEMAXXk1145120k2735240MFEMABR
Δ k 128MFFMAXX183165170MFFMABR
k523503GFL05
603581561GFL06681659639GFL07758736716GFL09858GFL11
Lenze | V02-en_GB-03/20146.6 - 88
GFL shaft-mounted helical gearboxesTechnical data
6.6
132C22132C12112C22100C12090C32132C32100C32
258218194176g195176166157MFEMAXX
g1 187158147137MFEMABR403319324274MFEMAXXk1265222180k2109.5907668MFEMABR
Δ k 115102109128MFFMAXX201.5183170181MFFMABR
k741GFL07
868818GFL091061969968918GFL11
1180108810871037GFL14
p1p1)o4o3o2o1)k8a4a
7825222.6233.5106.51654654.5112.5GFL05
9831520.2280.511120655.558140GFL06
1183862435413525672.574173GFL07
14948627417.517031877.593.5220GFL09
18160033.5504.521639585.5120276.5GFL11
22874038599.527149089.5154339GFL14
s2f2e2c2b2a2o1i2tul2l1ld2d1dd
j7m6k6
4 x11
416512130200229.56033845660M104530GFL05
4 x14
421515180250276.580431263780M166540GFL06
4 x144
4215265
1517
180230
250300
350.510053.514808100M167550GFL074 x144 x17.5
430018250350415.512064181008120M209560GFL09
4 x17.55
5350400
2022
300350
400450
504.5160852212515160M2010880GFL118 x17.58 x17.5
540022350450603.52001062816018200M24135100GFL14
k2 !1)
6.6 - 89Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesTechnical data
6.6
Lenze | V02-en_GB-03/20146.6 - 90
GFL shaft-mounted helical gearboxesTechnical data
6.6
Hollow shaft with shrink disc
l4l1lk12k11k10k9i1g4g3g2d 1)
h6
261221421541541481502.57679722530
GFL04
261221421541541481502.57679722530
GFL04
281481681801791741764.084908035GFL05
301641942052042002025.0941009040GFL06
261922322452442382415.011612411050GFL07
302282782882872852885.014715914165GFL09
422383383503493443476.017619117080GFL11
553074074224214154187.0221253215100GFL14
Machine shaft design.1)
ƒ Output flange and hollow shaft with shrink disc (design S☐K) isonly possible with shrink disc in position 1.
ƒ Not suitable for through machine shaft at motor end:GFL04-2M S☐☐ 080C☐☐; d=30GFL05-2M S☐☐ 100C☐☐; d=35GFL06-2M S☐☐ 132C☐☐; d=40GFL07-2M S☐☐ 160C☐☐; d=50GFL11-2M S☐☐ 225C☐☐; d=80
6.6 - 91Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesAccessories
6.6
Hollow shaft with shrink disc
ƒ Ensure that the strength of the machine shaft material is ad-equate in shrink disc designs.When using typical steels, e.g. C45, 42CrMo4, the torques listedin the selection tables can be used without restriction.Please consult us if you wish to use material that is considerablyweaker. Medium surface roughness Rz must not exceed 15 µm(turning is sufficient).
Combination options with shrink disc in position 1 (drive end)
GFL☐☐-2M
Motor frame sizeGearbox
GFL04
063 1)
071 1)GFL05
063071
GFL06 080090 1)
100 1)
080090
GFL07100112 1)
090100
GFL09112132100112
GFL11132160180225112132
GFL14 160180225
Only possible without cover1)
ƒ For geared motors GFL☐☐-2M/E S... with shrink disc position 1:terminal box position / motec position 4 not possible!
Lenze | V02-en_GB-03/20146.6 - 92
GFL shaft-mounted helical gearboxesAccessories
6.6
Mounting set for hollow shaft circlip:Proposed design for auxiliary tools
l8, maxc9c8c7l9d2l1d
H7
85
310
5
40M10100
2530
GFL04
6
1071243035
GFL0512750M12
118416
8
60M16140
4045
GFL069
148
5
10175
5055
GFL07
20
11
80M20182
13210
6070
GFL09
14
22162507080
GFL1116
27082420100M24305100GFL14
6.6 - 93Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesAccessories
6.6
Foot mounting in position 3
s5nmi5i4i3ih1f6e5c5b6a6a5
6.625
2278.545.528.54.5901401521811547130GFL04
9.02591.058.031.02.0
1001921852116765160GFL05
11.0283011978.039.01252332052720580175GFL06
13.5323515297.052.0
3.0
15529225531260100220GFL07
17.54040177117
57.0
19037530036335125260GFL09
22.0505021715724048536548435155315GFL11
26.0605525719729560043057540200375GFL14
Foot design is not available for the following combinations:• GFL04: Motor frame size 090• GFL05: Motor frame size 090• GFL05: Motor frame size 100• GFL06: Motor frame size 112• GFL06: Motor frame size 132• GFL07: Motor frame size 160
Lenze | V02-en_GB-03/20146.6 - 94
GFL shaft-mounted helical gearboxesAccessories
6.6
Foot mounting in position 4
s5nmi5i4i3ihf5e5c5b5a5
6.625
2278.545.528.54.585133.015218108130GFL04
9.02591.058.031.02.0
95165.018521140160GFL05
11.0283011978.039.0120203.020527175175GFL06
13.5323515297.052.0
3.0
145252.025531220220GFL07
17.54040177117
57.0
180315.030036275260GFL09
22.05050217157224390.036548340315GFL11
26.06055257197278485.043057425375GFL14
ƒ In mounting positions E and F, the oil check bore hole/oil-sightglass are located between the feet in position 4!
6.6 - 95Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesAccessories
6.6
Rubber buffer for torque plate
c7cDd
4314.53011GFL04
4514.53011GFL05
5015.04013GFL06
7927.05017GFL07
8828.06021GFL09
9829.07226GFL11
11030.09233GFL14
Lenze | V02-en_GB-03/20146.6 - 96
GFL shaft-mounted helical gearboxesAccessories
6.6
Ventilations
Position of ventilation, sealing elements and oil level check
GFL05…14-2
Item 1 standardA to FMounting positionItem 2 only with:⊗ Ventilation / Oil filler plug
● Oil drain plug • GFL05-2M☐☐☐ 090C☐☐◒ Oil control plug • GFL05-2M☐☐☐ 100C☐☐* On both sides • GFL06-2M☐☐☐ 112C☐☐** On opposite side • GFL07-2M☐☐☐ 160C☐☐
6.6 - 97Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesAccessories
6.6
Ventilations
Position of ventilation, sealing elements and oil level check
GFL05…14-3
Item 1 standardA to FMounting positionItem 2 only with:⊗ Ventilation / Oil filler plug
● Oil drain plug • GFL07-3M☐☐☐ 090C☐☐◒ Oil control plug • GFL07-3M☐☐☐ 100C☐☐* On both sides • GFL09-3M☐☐☐ 112C☐☐** On opposite side
Lenze | V02-en_GB-03/20146.6 - 98
GFL shaft-mounted helical gearboxesAccessories
6.6
Ventilations
Compensation reservoir for mounting position C
GFL☐☐-2
112090Motor100
o9o8o7o6o5o9o8o7o6o5[mm][mm][mm][mm][mm][mm][mm][mm][mm][mm]
525464405344187525464405344165GFL09
612551452391176608547448387154GFL11
707646507446181GFL14
160132Motor180225
o9o8o7o6o5o9o8o7o6o5[mm][mm][mm][mm][mm][mm][mm][mm][mm][mm]
525464405344219525464405344204GFL09
612551452391214612551452391200GFL11
707646507446211707646507446211GFL14
ƒ Terminal box position 3 not permitted.ƒ Foot in position 3 not permitted.
6.6 - 99Lenze | V02-en_GB-03/2014
GFL shaft-mounted helical gearboxesAccessories
6.6
Lenze | V02-en_GB-03/20146.6 - 100
GFL shaft-mounted helical gearboxesAccessories
6.6
MF three-phase ACmotors0.55 to 22 kW
Motors
6.11 - 4List of abbreviationsGeneral information
6.11 - 5Product key
6.11 - 6Product information
6.11 - 7Functions and features
6.11 - 10Motor – inverter assignment
6.11 - 11Dimensioning
6.11 - 13Standards and operating conditionsTechnical data
6.11 - 14Rated data for 120 Hz
6.11 - 15Dimensions, self-ventilated (4-pole)
6.11 - 16Dimensions, forced ventilated (4-pole)
6.11 - 17Dimensions, 8400 motec inverter
6.11 - 19Spring-applied brakeAccessories
6.11 - 31Resolver
6.11 - 32Incremental encoder and SinCos absolute value encoder
6.11 - 33Blowers
6.11 - 35Temperature monitoring
6.11 - 37Terminal box
6.11 - 42Plug connectors
6.11 - 42ICN connector
6.11 - 51M12 connector
6.11 - 52HAN connector
6.11 - 572nd shaft end
6.11 - 58Protection cover
MF three-phase AC motorsContents
6.11
List of abbreviations
Max. mains voltage[V]UmaxEfficiency[%]η100 %Efficiency[%]η75 % Min. mains voltage[V]Umin
Rated voltage[V]UN, ΔEfficiency[%]η50 %Power factorcos ϕ Rated voltage[V]UN, YRated current[A]INMax. current consumption[A]ImaxMoment of inertia[kgcm²]JMass[kg]mStarting torque[Nm]MaStalling torque[Nm]MbMax. torque[Nm]MmaxRated torque[Nm]MNRated speed[r/min]nNRated power[kW]PNMax. power input[kW]Pmax
Communauté EuropéenneCECanadian Standards AssociationCSADeutsches Institut für Normung e.V.DINElectromagnetic compatibilityEMCEuropean standardENInternational Electrotechnical CommissionIECInternational Mounting CodeIMInternational Protection CodeIPNational Electrical Manufacturers AssociationNEMAUnderwriters Laboratory Listed ProductULUnderwriters Laboratory Recognized ProductURVerband deutscher Elektrotechniker (Association ofGerman Electrical Engineers)
VDE
China Compulsory CertificateCCCCertificate for Russian FederationGOSTCombined certification marks of UL for the USA andCanada
cURus
Certificate for UkraineUkrSEPRO
V01-en_GB-02/20146.11 - 4
MF three-phase AC motorsGeneral information
6.11
Product key
6.11 - 5V01-en_GB-02/2014
MF three-phase AC motorsGeneral information
6.11
Product information
Special motors have been designed for direct attachment to Lenzegearboxes.
Thesemotors are attached to the gearboxwithout theuse of a clutch.Torque transmission between the toothing and the motor shaft isfriction-locked via a tapered connection here.Thismotor designmeans that the gearedmotors only require a smallinstallation space.
OptionsL-forceMF three-phaseACmotors are available in apower range from0.55 to 22 kW and have been fully optimised for inverter operation. • Various brake sizes – each available with several braking torques
– can be combined with the three-phase AC motors.The benefits for you: • The LongLife version of the brake can easily reach 10 x 106
switching cycles.• Up to sizes smaller than standard three-phase AC motors• A resolver and various incremental and absolute value encoderscan be fitted for speed and position detection.
• The motors exceed the minimum efficiency levels of efficiencyclass IE2
• Large speed setting range: 1:24 (without field weakening) • For fast commissioning, themotors are also availablewith connect-ors for the power connection, brake, blower and feedback.• Dynamic thanks to a lowmoment of inertia
• Instead of an integral fan, the motor can optionally be equippedwith a blower. No torque reduction is then necessary, even atspeeds below 20 Hz.
Basic versions• The thermal sensors integrated as standard allow for permanenttemperature monitoring and are coordinated to the motor wind-ing's temperature class F (155°C).
• For drive tasks in decentralised applications, the motor can beordered with the motec inverter connected to the terminal box.
• Themotors of the basic version are adapted to ambient conditionsby enclosure IP55.
• The motors are available with cURus, GOST-R, CCC and UkrSeproapproval.
• Smooth start/braking is possible by increasing themotor's centri-fugal mass with a cast iron fan.
• In toughoperating conditions, the surface and corrosionprotectionsystem is provided to reliably protect the motor from corrosivemedia. • The motor can be equipped with a handwheel for manual setup
or emergency operations.• To protect the fan from falling objects, the fan cover can beequipped with a protection cover.
• A 2nd shaft end is available for further modifications.
V01-en_GB-02/20146.11 - 6
MF three-phase AC motorsGeneral information
6.11
Functions and features
Size
090080071063MotorSpring-applied brake
Standard or LongLife designStandard or LongLife designDesignReduced, standard or increased braking torqueReduced or standard braking torque
With rectifierWith rectifierWith manual release leverWith manual release lever
Low noiseLow noiseFeedback
ResolverDesignIncremental encoder
Absolute value encoder (multi-turn)Thermal sensor
TKOThermal contact
KTY83-110Thermal detectorKTY84-130
PTCPTC thermistorMotor connection
Terminal boxPower connectionICN connector
HAN10E connectorHANmodular connector
Terminal boxBrake connectionICN connector
HANmodular connectorHAN10E connector
Terminal boxBlower connectionICN connector
Terminal boxFeedback connectionICN connector
Terminal boxTemperature sensor connectionTKO or PTC at connector in the power connectionKTY at connector in the feedback connection
Shaft bearings
Standard motors (B3, B5, B14): side BPosition of the locating bearingMotors for gearbox direct mounting: side A
Deep-groove ball bearing with high-temperature resistant grease, 2 sealing discs or cover platesBearing typeColour
Not coatedPrimed
Paint in various corrosion-protection designs in accordance with RAL coloursFurther options
Protection coverProtection cover2nd shaft end
6.11 - 7V01-en_GB-02/2014
MF three-phase AC motorsGeneral information
6.11
Functions and features
Size
132112100MotorSpring-applied brake
Standard designStandard or LongLife designDesignReduced, standard or increased braking torqueReduced, standard or increased
braking torque With rectifierWith rectifier With manual release lever
With manual release lever Low noiseLow noise
Feedback
ResolverDesignIncremental encoder
Absolute value encoder (multi-turn)Thermal sensor
TKOThermal contact
KTY83-110Thermal detectorKTY84-130
PTCPTC thermistorMotor connection
Terminal boxTerminal boxTerminal boxPower connectionHANmodular connectorICN connector
HAN10E connectorHANmodular connector
Terminal boxTerminal boxTerminal boxBrake connectionHANmodular connectorICN connector
HANmodular connectorHAN10E connector
Terminal boxBlower connectionICN connector
Terminal boxFeedback connectionICN connector
Terminal boxTerminal boxTemperature sensor connectionKTY at connector in the feedback connectionTKO or PTC at connector in the
power connectionKTY at connector in the feedback
connectionShaft bearings
Standard motors (B3, B5, B14): side BPosition of the locating bearingMotors for gearbox direct mounting: side A
Deep-groove ball bearing with high-temperature resistant grease, 2 sealing discs or cover platesBearing typeColour
Not coatedPrimed
Paint in various corrosion-protection designs in accordance with RAL coloursFurther options
Protection cover2nd shaft end
V01-en_GB-02/20146.11 - 8
MF three-phase AC motorsGeneral information
6.11
Functions and features
Surface and corrosion protection
Various surface coatings ensure that themotors operate reliably evenat high air humidity, in outdoor installation or in the presence of at-
For optimum protection of three-phase AC motors against ambientconditions, the surface and corrosion protection system (OKS) offerstailor-made solutions. mospheric impurities. Any colour from the RAL Classic collection can
be chosen for the top coat. The three-phase AC motors are alsoavailable unpainted (no surface and corrosion protection).
MeasuresApplicationsSurface and corrosion protec-tion systemOKS-G(primed)
•• 2K PUR priming coat (grey)Dependent on subsequent top coat applied
OKS-S(small)
••
Surface coating as per corrosivity category C1 (inline with EN 12944-2)
Standard applications• Internal installation in heated buildings• Air humidity up to 90%
OKS-M(medium)
••
Surface coating as per corrosivity category C2 (inline with EN 12944-2)
Internal installation in non-heated buildings• Covered, protected external installation• Air humidity up to 95%
OKS-L(high)
•
•
Surface coating as per corrosivity category C3 (inline with EN 12944-2)
External installation• Air humidity above 95%
• Blower cover andB end shield additionally primed
• Chemical industry plants•
•
Food industry
Screws zinc-coated• Cable glands with gaskets• Corrosion-resistant brakewith cover ring, stainlessfriction plate, and chrome-plated armature plate(on request)
Optional measures:• Motor recesses sealed off (on request)
Structure of surface coating
ColourSurface coatingCorrosivity categorySurface and corrosion protec-tion system
StructureDIN EN ISO 12944-2
Without OKS(uncoated)
2K PUR priming coatOKS-G(primed)
Standard: RAL 7012Optional: RAL Classic
2K-PUR top coatC1OKS-S(small)
2K PUR priming coat2K-PUR top coat
C2OKS-M(medium)
C3OKS-L(high)
6.11 - 9V01-en_GB-02/2014
MF three-phase AC motorsGeneral information
6.11
Motor – inverter assignment
Rated frequency 120 Hz
ƒ Decentralised inverter 8400 motec (E84DVB)ƒ Inverter Drives 8400 (E84AV)
Product keyRated power
InverterMotor
PN[kW]
E84DVB☐5514S☐☐☐2☐MF☐☐☐☐☐063-320.55
E84DVB☐7514S☐☐☐2☐MF☐☐☐☐☐063-420.75
E84DVB☐1124S☐☐☐2☐MF☐☐☐☐☐071-321.10
E84DVB☐1524S☐☐☐2☐MF☐☐☐☐☐071-421.50
E84DVB☐2224S☐☐☐2☐MF☐☐☐☐☐080-322.20
E84DVB☐3024S☐☐☐2☐MF☐☐☐☐☐080-423.00
E84DVB☐4024S☐☐☐2☐MF☐☐☐☐☐090-324.00
E84DVB☐5524S☐☐☐2☐MF☐☐☐☐☐100-125.50
E84DVB☐7524S☐☐☐2☐MF☐☐☐☐☐100-327.50
MF☐☐☐☐☐112-2211.0
MF☐☐☐☐☐132-1215.0
MF☐☐☐☐☐132-2218.5
MF☐☐☐☐☐132-3222.0
V01-en_GB-02/20146.11 - 10
MF three-phase AC motorsGeneral information
6.11
Dimensioning
Torque derating at lowmotor frequencies
Motor size-dependent torque reduction, taking into account thethermal response during operation on the inverter.
Torque characteristics
A = Operation with integral fan and brakeB = Operation with integral fan and brake control "Holding currentreduction"
ƒ Themotor specifications stated in this catalogue for inverter op-eration apply to operationwith a Lenze inverter. If you are uncer-tain, get in touch with the manufacturer of the inverter to askwhether thedevice is capableof driving themotorwith the statedspecifications (e.g. setting range, base frequency).
You can use the Drive Solution Designer for precise drive dimension-ing.
The Drive Solution Designer helps you to carry out a fast and high-quality drive dimensioning.The software includes well-founded and proven knowledge on driveapplications and electro-mechanical drive components.
Please contact your Lenze sales office.
6.11 - 11V01-en_GB-02/2014
MF three-phase AC motorsGeneral information
6.11
V01-en_GB-02/20146.11 - 12
MF three-phase AC motorsGeneral information
6.11
Standards and operating conditions
Enclosure
IP55EN 60529Approval
cURusClassCCC
GOST-RUkrSepro
Temperature class
BIEC/EN 60034-1; utilisation
FIEC/EN60034-1; insulationsystem(enamel-insu-lated wire)Min. ambient operating temperature
-20[°C]Topr,minMax. ambient operating temperature
40[°C]Topr,max
60[°C]Topr,maxWith power reductionSite altitude
4000[m]HmaxAmslMax. speed
4500[r/min]nmax
6.11 - 13V01-en_GB-02/2014
MF three-phase AC motorsTechnical data
6.11
Rated data for 120 Hz
4-pole motors
IN, YUN, YIN, ΔUN, ΔnNPN± 10 %± 10 %
[A][V][A][V][r/min][kW]
1.803453.2020034400.55MF☐☐☐☐☐063-322.303704.0021034000.75MF☐☐☐☐☐063-423.203455.5020034901.10MF☐☐☐☐☐071-323.903606.8020534501.50MF☐☐☐☐☐071-425.303459.1020035002.20MF☐☐☐☐☐080-326.6037011.421034803.00MF☐☐☐☐☐080-428.5037034804.00MF☐☐☐☐☐090-3212.934035255.50MF☐☐☐☐☐100-1215.937535157.50MF☐☐☐☐☐100-3223.5370353011.0MF☐☐☐☐☐112-2231.2370356015.0MF☐☐☐☐☐132-1239.0360356018.5MF☐☐☐☐☐132-2244.5380355022.0MF☐☐☐☐☐132-32
m 1)J 1)η100 %η75 %cos ϕMmaxMN
[kg][kgcm²][%][%][Nm][Nm]
4.403.7075.075.00.686.001.53MF☐☐☐☐☐063-324.403.7079.679.60.698.002.11MF☐☐☐☐☐063-426.4012.881.481.40.7712.03.01MF☐☐☐☐☐071-326.4012.882.882.80.8016.04.15MF☐☐☐☐☐071-4211.028.084.384.30.8624.06.00MF☐☐☐☐☐080-3211.028.085.585.50.8632.08.20MF☐☐☐☐☐080-4218.032.086.687.00.8544.010.9MF☐☐☐☐☐090-3226.561.087.787.90.8160.014.9MF☐☐☐☐☐100-1226.561.088.788.90.8180.020.3MF☐☐☐☐☐100-3238.010789.889.80.7812029.7MF☐☐☐☐☐112-2266.033690.688.90.8416040.3MF☐☐☐☐☐132-1266.033691.289.90.8420049.6MF☐☐☐☐☐132-2266.033691.690.50.8324059.2MF☐☐☐☐☐132-32
Without accessories1)
V01-en_GB-02/20146.11 - 14
MF three-phase AC motorsTechnical data
6.11
Dimensions, self-ventilated (4-pole)
Motor type
MFEMARSMFEMAIG
MFEMABSMFEMABIMFEMABRMFEMAXX
MFEMAAGMFEMABA
Motor framesize
Δ kΔ kΔ kΔ k
[mm][mm][mm][mm]
5610340
0
063-32063-42
529652071-32071-42
11111173080-32080-42
8710568090-32
8110176100-12100-32
8012090112-22
103125110132-12132-22132-32
6.11 - 15V01-en_GB-02/2014
MF three-phase AC motorsTechnical data
6.11
Dimensions, forced ventilated (4-pole)
Motor type
MFFMARSMFFMAIG
MFFMABSMFFMABIMFFMABRMFFMAXX
MFFMAAGMFFMABA
Motor frame size
P6n3m2g3k4Δ kΔ kΔ kΔ k
[mm][mm][mm][mm][mm][mm][mm][mm][mm]
1xM16x1.5
10595115
12
128
170170
128
063-32063-42
122165165071-32071-42
1069613213183183080-32080-42
10595
141
22
181181090-32
150109170170109100-12100-32
162183183183102112-22
18232202202202115132-12132-22132-32
V01-en_GB-02/20146.11 - 16
MF three-phase AC motorsTechnical data
6.11
Dimensions, 8400 motec inverter
Rated frequency 120 Hz
Product key
InverterMotor
x120Hzn2, 120Hzm1, 120Hzg1, 120Hz[mm][mm][mm][mm]
18.8
161241
154E84DVB☐5514S☐☐☐2☐MF☐☐☐☐☐063-32E84DVB☐7514S☐☐☐2☐MF☐☐☐☐☐063-42
21.0163E84DVB☐1124S☐☐☐2☐MF☐☐☐☐☐071-32E84DVB☐1524S☐☐☐2☐MF☐☐☐☐☐071-42
24.5176260201E84DVB☐2224S☐☐☐2☐MF☐☐☐☐☐080-32E84DVB☐3024S☐☐☐2☐MF☐☐☐☐☐080-42
16.0
195325
261E84DVB☐4024S☐☐☐2☐MF☐☐☐☐☐090-32
17.1272E84DVB☐5524S☐☐☐2☐MF☐☐☐☐☐100-12E84DVB☐7524S☐☐☐2☐MF☐☐☐☐☐100-32
6.11 - 17V01-en_GB-02/2014
MF three-phase AC motorsTechnical data
6.11
V01-en_GB-02/20146.11 - 18
MF three-phase AC motorsTechnical data
6.11
Spring-applied brake
Three-phaseACmotors canbe fittedwith a spring-appliedbrake. Thisis activated after the supply voltage is switched off (closed-circuitprinciple). For optimumadjustment of the brakemotor to the applic-ation, a range of braking torques and control modes is available forevery motor frame size. For applications with very high operatingfrequencies the brake is also available in a LongLife version, with re-inforced mechanical brake components.
Features
ControlVersions• DC supply• Standard
- 1 x 106 repeating switching cycles • AC supply via rectifier in the terminal box- 1 x 106 reversing switching cycles
Enclosure• LongLife- 10 x 106 repeating switching cycles • Without manual release IP55- 15 x 106 reversing switching cycles • With manual release IP54
Friction lining• Non-asbestos, low wearing
Options• Manual release• UL/CSA approval• Noise-reduced
Motor – brake assignment
Design
LongLifeStandard
Rated torqueSizeRated torqueSizeMotor frame size
BrakeBrake
MkMk
[Nm][Nm]
4.00062.504.00
0606
063-32063-42
4.003.50
0608
2.504.00
0606071-32
3.5008
4.003.50
0608
2.504.00
0606
071-428.0008
3.50088.0008
8.007.00
0810
3.508.00
0808080-32
7.0010
8.007.00
0810
3.508.00
0808
080-4216.010
7.001016.010
6.11 - 19V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Motor – brake assignment
Design
LongLifeStandard
Rated torqueSizeRated torqueSizeMotor frame size
BrakeBrake
MkMk
[Nm][Nm]
8.007.00
0810
3.508.00
0808
090-3216.010
7.001016.01023.010
16.014.0
1012
7.0016.0
1010
100-12
32.012
14.01232.0127.0016.0
1010
100-32 14.01232.01246.01214.032.0
1212
112-2235.01460.01435.060.0
1414
132-1260.01680.01635.060.0
1414
132-22132-32
60.01680.01610016
V01-en_GB-02/20146.11 - 20
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Direct connection without rectifier
If the brake is activated directly without a rectifier, a freewheelingdiode or a spark suppressor is required to protect against inductionpeaks.• Supply voltagesDC 24 VDC 180 VDC 205 V
Connection via mains voltage with brake rectifier
If the brake is not directly supplied with DC voltage, a rectifier is re-quired. This is included in the scope of supply and is located in theterminal box of the motor. The rectifier converts the AC voltage ofthe connection intoDC voltage. The following rectifiers are available:
Half-wave rectifier, 6-pole• Ratio of supply voltage to brake coil voltage = 2.22• Approved by UL/CSA• Supply voltagesAC 230 VAC 400 VAC 460 V
Bridge rectifier, 6-pole• Ratio of supply voltage to brake coil voltage = 1.11• Supply voltageAC 230 V
Bridge/half-wave rectifier, 6-pole• Ratio of supply voltage to brake coil voltageup to overexcitation time = 1.11beyond overexcitation time = 2.22
Supply voltages:• AC 230 V• AC 400 V
6.11 - 21V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Connection via mains voltage with brake rectifier
Bridge/half-wave rectifier, 6-pole• Ratio of supply voltage to brake coil voltageup to overexcitation time = 1.11beyond overexcitation time = 2.22
Supply voltages:• AC 230 V• AC 400 V
During the switching operation the bridge/half-wave rectifier func-tions as a bridge rectifier for the overexcitation time tü and then asa half-wave rectifier. This combination optimises the performanceof the brake – depending on the assignment of brake coil voltage andsupply voltage:
• Holding current reduction (cold brake)• Short-time overexcitation of the brake coilBy reducing the holding current, the bridge/half-wave rectifier isable to reduce the power input to the open brake. As the brakeheats up less, this type of activation is known as "cold brake".
Activating the brake coil for the overexcitation time tüwith twicethe rated voltage allows the disengagement time to be reduced.The brake opens more quickly and wear on the friction lining isreduced.These features make this activation version particularly suitablefor lifting applications. It is therefore only available in combinationwith a brake with increased braking torque.
V01-en_GB-02/20146.11 - 22
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Permissible friction energy
Q =Switching energy per switching cycleSh =Operating frequencyBrake size = 06 to 25
6.11 - 23V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Rated data with reduced braking torque
ƒ Please enquire for braking torques andmaximumswitchingworkvalues not listed here.
Size
252018161412100806Power input
0.110.100.0850.0550.0500.0400.0300.0250.020[kW]PinBraking torque
26514580.060.035.014.07.003.502.50[Nm]MB100
20311565.050.030.012.06.103.102.30[Nm]MB1000
19911263.048.029.012.06.003.102.30[Nm]MB1200
193 1)109 1)61.047.028.011.05.803.002.20[Nm]MB1500
60.0 1)46.028.011.05.702.902.10[Nm]MB1800
43.0 1)26.0 1)10.05.302.802.00[Nm]MB3000
10.0 1)5.202.702.00[Nm]MB3600Maximum switching energy
12080.060.036.030.024.012.07.503.00[KJ]QE100
12080.060.036.030.024.012.07.503.00[KJ]QE1000
12080.060.036.030.024.012.07.503.00[KJ]QE1200
36.0 1)24.0 1)60.036.030.024.012.07.503.00[KJ]QE1500
36.0 1)36.030.024.012.07.503.00[KJ]QE1800
11.0 1)18.0 1)24.012.07.503.00[KJ]QE3000
7.00 1)12.07.503.00[KJ]QE3600Transition operating frequency
15.019.020.027.028.030.040.050.079.0[1/h]ShüMoment of inertia
20.07.302.901.500.630.450.200.0610.015[kgcm²]JMass
31.019.512.68.705.804.202.601.500.90[kg]m
In the regionof the load limit the value for friction energyQBW canbe reducedto 40 %.
1)
V01-en_GB-02/20146.11 - 24
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Rated data with reduced braking torque
ƒ Activation via half-wave or bridge rectifier
Size
252018161412100806Friction energy
352223221542966761706264210113[MJ]QBWDelay time
26447.032.053.037.021.020.014.011.0[ms]t11EngagingRise time
12010020.030.022.019.017.010.013.0[ms]t12Braking torqueEngagement time
38414752.083.059.040.037.024.0[ms]t1Disengagement time
26920723016914865.057.037.035.0[ms]t2
ƒ Activation via bridge/half-wave rectifier
Design
Holding current reduction (cold brake)Size
252018161412100806Friction energy
352223221542966761706264210113[MJ]QBWOverexcitation time
1300300[ms]tüMin. rest time
3900900[ms]tDelay time
30412683.011461.049.035.022.012.0[ms]t11EngagingRise time
13826952.065.037.045.030.016.014.0[ms]t12Braking torqueEngagement time
44339513418097.093.066.038.026.0[ms]t1Disengagement time
26920723016914865.057.037.035.0[ms]t2
ƒ The brake response and application times are guide values. Theengagement time is 10 times longer with AC-side switching.With themaximumair gap thedisengagement time t2–depend-ing on the brake and control – is up to 4 times longer than thedisengagement time with the rated air gap.
6.11 - 25V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Rated data with standard braking torque
ƒ Please enquire for braking torques andmaximumswitchingworkvalues not listed here.
Size
252018161412100806Power input
0.110.100.0850.0550.0500.0400.0300.0250.020[kW]PinBraking torque
40026015080.060.032.016.08.004.00[Nm]MB100
30720612166.051.027.014.07.203.70[Nm]MB1000
30020111865.050.027.014.07.003.60[Nm]MB1200
291 1)195 1)11563.048.026.013.06.803.50[Nm]MB1500
112 1)61.047.026.013.06.703.40[Nm]MB1800
57.0 1)44.0 1)24.012.06.303.20[Nm]MB3000
23.0 1)12.06.103.20[Nm]MB3600Maximum switching energy
12080.060.036.030.024.012.07.503.00[KJ]QE100
12080.060.036.030.024.012.07.503.00[KJ]QE1000
12080.060.036.030.024.012.07.503.00[KJ]QE1200
36.0 1)24.0 1)60.036.030.024.012.07.503.00[KJ]QE1500
36.0 1)36.030.024.012.07.503.00[KJ]QE1800
11.0 1)18.0 1)24.012.07.503.00[KJ]QE3000
7.00 1)12.07.503.00[KJ]QE3600Transition operating frequency
15.019.020.027.028.030.040.050.079.0[1/h]ShüMoment of inertia
20.07.302.901.500.630.450.200.0610.015[kgcm²]JMass
31.019.512.68.705.804.202.601.500.90[kg]m
In the regionof the load limit the value for friction energyQBW canbe reducedto 40 %.
1)
V01-en_GB-02/20146.11 - 26
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Rated data with standard braking torque
ƒ Activation via half-wave or bridge rectifier
Size
252018161412100806Friction energy
35222322154296657153026415885.0[MJ]QBWDelay time
11065.033.027.017.028.015.0[ms]t11EngagingRise time
12010045.030.025.019.016.013.0[ms]t12Braking torqueEngagement time
23016578.057.042.053.047.031.028.0[ms]t1Disengagement time
39034027022021011576.057.045.0[ms]t2
ƒ Activation via bridge/half-wave rectifier
Design
Holding current reduction (cold brake)Size
252018161412100806Friction energy
35222322154296657153026415885.0[MJ]QBWOverexcitation time
1300300[ms]tüMin. rest time
3900900[ms]tDelay time
15410280.058.033.048.031.025.016.0[ms]t11EngagingRise time
16815710964.049.043.021.027.014.0[ms]t12Braking torqueEngagement time
32225918912282.090.052.030.0[ms]t1Disengagement time
39034027022021011576.057.045.0[ms]t2
ƒ The brake response and application times are guide values. Theengagement time is 10 times longer with AC-side switching.With themaximumair gap thedisengagement time t2–depend-ing on the brake and control – is up to 4 times longer than thedisengagement time with the rated air gap.
6.11 - 27V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Rated data with increased braking torque
ƒ Please enquire for braking torques andmaximumswitchingworkvalues not listed here.
Size
25252020181616141210Power input
0.110.110.100.100.0850.0550.0550.0500.0400.030[kW]PinBraking torque
60049040031520012510075.046.023.0[Nm]MB100
46137631724916210383.064.039.020.0[Nm]MB1000
44936730924415810181.062.039.020.0[Nm]MB1200
436 1)356 1)300 1)237 1)15398.078.060.038.019.0[Nm]MB1500
150 1)96.077.059.037.019.0[Nm]MB1800
89.0 1)71.0 1)55.0 1)34.017.0[Nm]MB3000
33.0 1)17.0[Nm]MB3600Maximum switching energy
12012080.080.060.036.036.030.024.012.0[KJ]QE100
12012080.080.060.036.036.030.024.012.0[KJ]QE1000
12012080.080.060.036.036.030.024.012.0[KJ]QE1200
36.0 1)36.0 1)24.0 1)24.0 1)60.036.036.030.024.012.0[KJ]QE1500
36.0 1)36.036.030.024.012.0[KJ]QE1800
11.0 1)11.0 1)18.0 1)24.012.0[KJ]QE3000
7.00 1)12.0[KJ]QE3600Transition operating frequency
15.015.019.019.020.027.027.028.030.040.0[1/h]ShüMoment of inertia
20.020.07.307.302.901.501.500.630.450.20[kgcm²]JMass
31.031.019.519.512.68.708.705.804.202.60[kg]m
In the regionof the load limit the value for friction energyQBW canbe reducedto 40 %.
1)
ƒ Activation via half-wave or bridge rectifier
Size
25201816141210Friction energy
140924655801596578241563253353198[MJ]QBWDelay time
38.077.017.046.024.017.022.011.016.010.0[ms]t11EngagingRise time
12010045.030.025.019.0[ms]t12Braking torqueEngagement time
15819711714669.047.052.036.041.029.0[ms]t1Disengagement time
532451470378356435297308193109[ms]t2
V01-en_GB-02/20146.11 - 28
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Rated data with increased braking torque
ƒ Activation via bridge/half-wave rectifier
Design
Holding current reduction (cold brake)Size
25201816141210Friction energy
140924655801596578241563253353198[MJ]QBWOverexcitation time
1300300[ms]tüMin. rest time
3900900[ms]tDelay time
85.012317.069.060.021.041.017.027.024.0[ms]t11EngagingRise time
27019010014811337.055.037.043.044.0[ms]t12Braking torqueEngagement time
35531333421717357.097.054.070.068.0[ms]t1Disengagement time
532451470378356435297308193109[ms]t2
Design
Over-excitationSize
25201816141210Friction energy
352223221542966761706264[MJ]QBWOverexcitation time
1300300[ms]tüMin. rest time
3900900[ms]tDelay time
13517155.010386.046.070.031.054.029.0[ms]t11EngagingRise time
43026631922216083.093.068.087.053.0[ms]t12Braking torqueEngagement time
56543737432524612916399.014182.0[ms]t1Disengagement time
20418416716015116814111781.053.0[ms]t2
ƒ The brake response and application times are guide values. Theengagement time is 10 times longer with AC-side switching.With themaximumair gap thedisengagement time t2–depend-ing on the brake and control – is up to 4 times longer than thedisengagement time with the rated air gap.
6.11 - 29V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Spring-applied brake
Manual release lever
SizeMotor frame size
Brake
d12h5Δ kk5[mm][mm][mm][mm]
13.01072917306063-32063-42
13.013.0
107116
2927
186187
0608
071-32071-42
13.013.0
107116
2927
207218
0608
080-32080-42
13.013.0
116132
2728
245256
0810
090-32
13.013.0
132161
2837
294296
1012
100-12100-32
13.024.0
161195
3741
292296
1214
112-22
24.024.0
195240
4155
373373
1416
132-12132-22132-32
The following combinations with manual release lever and motorconnection in the same position are not possible:• HAN connector with connection in position 1• Inverter motec• Terminal box of motor sizes 071, 080, 090 for brake and retracting(M☐☐MA BR/BS/BA/BI)
V01-en_GB-02/20146.11 - 30
MF three-phase AC motorsAccessories
6.11
Resolver
Stator-fed resolver with two stator windings offset by 90° and onerotor winding with transformer winding.
ƒ The three-phase AC motors with resolver cannot be used forspeed-dependent safety functions in connectionwith the SM301safety module.
Product key
RS1Accuracy
-10 ... 10[']Absolute positioning
1 revolutionMax. input voltage
10.0[V]Uin,maxDCMax. input frequency
4.00[kHz]fin,maxRatio
0.30± 5 %Stator / rotorRotor impedance
51 + j90[Ω]ZroStator impedance
102 + j150[Ω]ZsoImpedance
44 + j76[Ω]ZrsMin. insulation resistance
10.0[MΩ]RAt DC 500 VNumber of pole pairs
1
6.11 - 31V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Incremental encoder andSinCosabsolute valueencoder
ƒ The three-phase ACmotorswith incremental encoders or SinCosabsolute value encoders cannot be used for speed-dependentsafety functions in connection with the SM 301 safety module.
Encoder type
SinCosabsolutevalue
TTL incrementalHTL incremental
Product key
AM1024-8V-H
IG2048-5V-T
IG1024-5V-T
IG512-5V-T
IG2048-24V-H
IG1024-24V-H
IG512-24V-H
IG128-24V-H
Encoder type
Multi-turn
Pulses
10242048102451220481024512128Output signals
1 VssTTLHTLInterfaces
HiperfaceA, B, N track and invertedA, B trackAbsolute revolutions
40960Accuracy
-0.8 ... 0.8-2 ... 2-22.5 ...22.5
[']
Min. input voltage
7.004.758.00[V]Uin,minDCMax. input voltage
12.05.2530.026.0[V]Uin,maxDCMax. current consumption
0.0800.150.040[A]ImaxLimit frequency
20030016030.0[kHz]fmaxInverter assignment
E84AVTCE84AVHCE84AVSCE94AE84AVHCECS
EVS93
Servo-InvertersInverters• Servo Drives 9400 (E94A)• Inverter Drives 8400 StateLine (E84AVSC)
• Inverter Drives 8400 HighLine (E84AVHC) • 9300 servo inverters (EVS93)• Servo Drives ECS• Inverter Drives 8400 TopLine (E84AVTC)
V01-en_GB-02/20146.11 - 32
MF three-phase AC motorsAccessories
6.11
Blowers
ƒ The use of a blower enables operation below 20 Hz withouttorque derating.
Rated data for 50 Hz
Connectionmethod
Number ofphases
Size
Motor
mImaxPmaxUmaxUmin
[kg][A][kW][V][V]
2.00
0.110.0272772301
063 0.120.028
303200Δ3
0.070525346Y
2.10
0.100.0272772301
071 0.110.031
303200Δ3
0.060525346Y
2.300.11
0.0292772301
0800.031
303200Δ3
0.060525346Y
2.70
0.290.0652772201
090 0.380.091
303200Δ3
0.22525346Y
3.00
0.280.0662772201
100 0.370.091
303200Δ3
0.22525346Y
3.10
0.280.0712772201
112 0.350.097
303200Δ3
0.20525346Y
4.20
0.400.0982772301
132 0.580.12
303200Δ3
0.33525346Y
6.20
0.97
0.25
2772301
160 0.87303200Δ3
0.50525346Y
8.00
0.972772301
180 0.87303200Δ3
0.50525346Y
6.11 - 33V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Blowers
Rated data for 50 Hz
Connectionmethod
Number ofphases
Size
Motor
mImaxPmaxUmaxUmin
[kg][A][kW][V][V]
8.00
0.97
0.25
2772301
200 0.87303200Δ
30.50525346Y
15.01.100.28400200Δ
2250.350.17525346Y
Rated data for 60 Hz
Connectionmethod
Number ofphases
Size
Motor
mImaxPmaxUmaxUmin
[kg][A][kW][V][V]
2.00
0.120.0322772301
063 0.100.028
332220Δ3
0.060575380Y
2.10
0.120.0332772301
071 0.100.029
332220Δ3
0.060575380Y
2.30
0.140.0372772301
080 0.100.034
332220Δ3
0.060575380Y
2.70
0.250.065277220
1
090 0.330.077
332Δ3
0.19575380Y
3.00
0.300.075277220
1
100 0.310.087
332Δ3
0.18575380Y
3.10
0.370.094277220
1
112 0.310.10
332Δ3
0.18575380Y
4.20
0.57
0.15
2772301
132 0.44332220Δ
3
0.25575380Y
6.200.93
0.36
332220Δ160
0.56575380Y
8.00
0.93332220Δ180
0.56575380Y
0.93332220Δ200
0.56575380Y
15.00.760.28400220Δ
2250.430.26575380Y
V01-en_GB-02/20146.11 - 34
MF three-phase AC motorsAccessories
6.11
Temperature monitoring
ƒ The thermal sensors are integrated in the windings. The use ofan additional motor protection switch is recommended.
TKO thermal contacts
Max. input voltageMax. input currentMax. reset temperat-ure
Min. reset temperat-ure
Operating temperat-ure
Function
AC
Uin,maxIin,maxTmaxTminT
-5 ... 5
[V][A][°C][°C][°C]
2502.5013590.0150NC contact
PTC thermistor
StandardRated resistanceOperating temperat-ure
Function
140 °C-20 °C155 °C
RNRNRNT
-5 ... 5
[Ω][Ω][Ω][°C]
DIN 44080DIN VDE 0660 Part
30325030.0550150
Sudden change in res-istance
6.11 - 35V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Temperature monitoring
KTY temperature sensor
Max. input currentRated resistanceFunction
170 °C25 °C170 °C150 °C25 °C
Iin,maxIin,maxRNRNRN[A][A][Ω][Ω][Ω]
0.0020.010247122251000Continuous resistance changeKTY83-110
0.0020.01014821334603Continuous resistance changeKTY84-130
Variation of resistance
ƒ If the detector is supplied with a measured current of 1 mA, theabove relationship between the temperature and the resistanceapplies.
V01-en_GB-02/20146.11 - 36
MF three-phase AC motorsAccessories
6.11
Terminal box
In the standard version, the motors are connected in the terminalbox. As an option, the motors are also available with the connectors
The MF three-phase AC motors are designed specifically for inverteroperation. With a base frequency of 120Hz, the rated voltage has
described on the following pages as long as the permissible ratingsare not exceeded.
been specified at approximately 200 V in delta connection (up to 2.2kW) and approximately 350V in star configurations.
Motor terminal box - built-onaccessories assignment: 4-pole / 6-polemotors
Motor type
M☐☐MAZEM☐☐MARSM☐☐MAXXM☐☐MAIGM☐☐MAAG
Motor framesize
Terminal box
KK2KK1063-32063-42
KK2KK2KK1071-32071-42
KK2KK2KK1080-32080-42
KK2KK2KK1090-32
KK2KK2KK1100-12100-32
KK2KK2KK1112-22
KK3KK3KK1132-12132-22132-32
Motor type
M☐☐MABZM☐☐MABSM☐☐MABRM☐☐MABIM☐☐MABA
Motor framesize
Terminal box
KK3KK2063-32063-42
KK2KK3KK2071-32071-42
KK2KK3KK2080-32080-42
KK2KK3KK2090-32
KK2KK3KK2100-12100-32
KK2KK3KK2112-22
KK3KK3KK3132-12132-22132-32
6.11 - 37V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Terminal box
Dimensions of KK1
ƒ Formotors withmotor terminal box KK1, the connector positioncan be selected in accordance with the terminal box position.
ƒ If preferred positions are not specified in the order, the cableentry will be positioned as circled on the diagram below.
Size
Motor
P2P1n2m1g1x
[mm][mm][mm][mm][mm][mm]
M20x1.5M20x1.5
M16x1.5M20x1.5 1)
75.093.0 1)
75.093.0 1)
100117 1)
2112 1)
063
109126 1)
2415 1)
071
M25x1.5M20x1.5115115
15014080
15719090
16620100
17622112
M32x1.5M32x1.512212219533132
UL/CSA approval: cURus1)
V01-en_GB-02/20146.11 - 38
MF three-phase AC motorsAccessories
6.11
Terminal box
Cable entry position when using KK1
Terminal box in position 3Terminal box in position 2
Terminal box in position 5Terminal box in position 4
6.11 - 39V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Terminal box
Dimensions of KK2
Size
Motor
P2P1n2m1g1x
[mm][mm][mm][mm][mm][mm]
M20x1.5M16x1.510313610713063
11815071
M25x1.5M20x1.5121152
13217080
13722090
14723100
15825112
V01-en_GB-02/20146.11 - 40
MF three-phase AC motorsAccessories
6.11
Terminal box
Dimensions of KK3
Size
Motor
P5P4P3P2P1n2m1g1x
[mm][mm][mm][mm][mm][mm][mm][mm][mm]
M20x1.5
M20x1.5
M32x1.5M25x1.5125195
1242063
1335071
14215080
14720090
15821100
16823112
18738132
M16x1.5M16x1.5M50x1.512722621035160
23073180
M16x1.5M50x1.5 1)M63x1.5 1)20535434695225
Cable entry only possible at one position.1)
Terminal box position 2: cable entry at position 5.Terminal box position 3: cable entry at position 2.Terminal box position 4: cable entry at position 3.Terminal box position 5: cable entry at position 4.
6.11 - 41V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Plug connectors
ICN, HAN andM12 connectors (only for IG128-24V-H incrementalencoder) are available for the three-phase AC motors.
ICN connector
A connector is used for power, brake and temperature monitoring.The connections to the feedback systemand the blower each employa separate connector.
Connection for power, brake and temperature monitoring
The connectors can be rotated through 270° and are fitted with abayonet catch for SpeedTec connectors. As this connector is alsocompatiblewith conventional unionnuts, existingmating connectorscan continue to be used without difficulty. The motor connection isdetermined in the terminal boxandmust be checkedbefore commis-sioning.
ƒ ICN 6-pole
Pin assignment
MeaningDesignationContact
Brake +/ACBD1 / BA11
Brake /ACBD2 / BA22
PE conductorPEPE
Phase U powerU4
Phase V powerV5
Phase W powerW6
ƒ ICN 8-pole
Pin assignment
MeaningDesignationContact
Phase U powerU1
PE conductorPEPE
Phase V powerV3
Phase W powerW4
Thermal sensor: TKO/PTC/ +KTYTB1 / TP1 / R1A
Thermal sensor: TKO/PTC/-KTYTB2 / TP2 / R2B
Brake +/ACBD1 / BA1C
Brake /ACBD2 / BA2D
V01-en_GB-02/20146.11 - 42
MF three-phase AC motorsAccessories
6.11
ICN connector
Feedback connection
All encoder systems (apart from IG128-24V-H) are also availablewithan ICN connector fixed to the motor terminal box for exceptionallyfast commissioning. The connectors are fitted with a bayonet fixing,which is also compatible with conventional union nuts. Existingmating connectors can therefore continue to be used without diffi-culty.
ƒ Resolver
Pin assignment
MeaningDesignationContact
Transformer windings+Ref1
-Ref2
Supply: Electronic nameplate+VCC ETS3
Cosine stator windings+COS4
-COS5
Sine stator windings+SIN6
-SIN7
Not assigned
8
9
10
KTY temperature sensor+KTY11
-KTY12
ƒ Hiperface incremental encoderandSinCosabsolutevalueencoder
Pin assignment
MeaningDesignationContact
Track B/+SINB1
Track A inverse/-COSA¯2
Track A/+COSA3
Supply ++UB4
MassGND5
Zero track inverse/-RS485Z¯6
Zero track/+RS485Z7
Not assigned8
Track B inverse/-SINB¯9
Not assigned10
KTY temperature sensor+KTY11
-KTY12
6.11 - 43V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
ICN connector
Motor terminal boxwith ICN connectors - built-onaccessories assign-ment: 4-pole / 6-pole motors
Motor type
M☐☐MAZEM☐☐MARSM☐☐MAXXM☐☐MAIGM☐☐MAAG
Motor framesize
Terminal box
KK2KK1063-32063-42
KK2KK2KK1071-32071-42
KK2KK2KK1080-32080-42
KK2KK2KK1090-32
KK2KK2KK1100-12100-32
Motor type
M☐☐MABZM☐☐MABSM☐☐MABRM☐☐MABIM☐☐MABA
Motor framesize
Terminal box
KK3KK2063-32063-42
KK2KK3KK2071-32071-42
KK2KK3KK2080-32080-42
KK2KK3KK2090-32
KK2KK3KK2100-12100-32
V01-en_GB-02/20146.11 - 44
MF three-phase AC motorsAccessories
6.11
ICN connector
Dimensions of KK1
ƒ Formotorswith connectors, the connector position can be selec-ted in accordance with the terminal box position.
ƒ If preferred positions are not specified in the order, the connectorwill be positioned as circled on the diagram below.
Size
Motor
n2m1g1x
[mm][mm][mm][mm]
93.093.011712063
12615071
115115
15014080
15719090
16620100
17622112
12212219533132
6.11 - 45V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
ICN connector
Connector position when using KK1
Terminal box in position 3Terminal box in position 2
Terminal box in position 5Terminal box in position 4
V01-en_GB-02/20146.11 - 46
MF three-phase AC motorsAccessories
6.11
ICN connector
Dimensions of KK2/KK3
ƒ Formotorswith connectors, the connector position can be selec-ted in accordance with the terminal box position.
ƒ If preferred positions are not specified in the order, the connectorwill be positioned as circled on the diagram below.
Size
Motor
z1, maxx8x7n2m1g1x
[mm][mm][mm][mm][mm][mm][mm]
431091610313610713063
11815071
4112523121152
13217080
13722090
14723100
15825112
711662712519518738132
6.11 - 47V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
ICN connector
Connector position when using KK2/KK3
Terminal box in position 3Terminal box in position 2
Terminal box in position 5Terminal box in position 4
V01-en_GB-02/20146.11 - 48
MF three-phase AC motorsAccessories
6.11
ICN connector
Blower connection
The blower is also optionally available with an ICN connector fixedto the terminal box of the blower for exceptionally fast commission-ing. The connectors are fitted with a bayonet fixing, which is alsocompatiblewith conventional union nuts. Existing counter plugs cantherefore continue to be used without difficulty.
ƒ Blower 1-ph
Pin assignment
MeaningDesignationContact
PE conductorPEPE
FanU11
U22
Not assigned
3
4
5
6
ƒ Blower 3-ph
Pin assignment
MeaningDesignationContact
PE conductorPEPE
Phase U powerU1
Not assigned2
Phase V powerV3
Not assigned4
5
Phase W powerW6
6.11 - 49V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
ICN connector
Dimensions of blower
Size
Motor
n3m2g3k4[mm][mm][mm][mm]
10595115
12063
122071
1069613213080
10595
141
22
090
150100
162112
18232132
1069620931
160
180
225
ƒ In addition, the cover of the blower terminal box (including con-nectors) can be rotated progressively through 90° if necessary.
V01-en_GB-02/20146.11 - 50
MF three-phase AC motorsAccessories
6.11
M12 connector
IG128-24V-H incremental encoder connection
Asa standard this incremental encoder is equippedwith a connectioncable of about 0.5 m length and with a common industry standardM12 connector at its end.
Pin assignment
MeaningDesignationContact
Supply ++UB1
Track BB2
MassGND3
Track AA4
6.11 - 51V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
HAN connector
10E
In the case of the rectangular HAN-10E connectors, all six ends of thethreewindingphases are takenout to thepower contacts. Themotorcircuit is therefore determined in the mating connector.
Pin assignment
MeaningContact
Terminal board: U11
Terminal board: V12
Terminal board: W13
Brake +/AC4
Brake -/AC5
Terminal board: W26
Terminal board: U27
Terminal board: V28
Thermal sensor: +KTY/PTC/TKO9
Thermal sensor: KTY/PTC/TKO10
V01-en_GB-02/20146.11 - 52
MF three-phase AC motorsAccessories
6.11
HAN connector
Modular
The connector is available with two different power modules (16 Aor 40A), dependingon the ratedmotor current. Themotor connectionis determined in the terminal box and must be checked before com-missioning.
ƒ HANmodular 16 A
Pin assignment
MeaningContactModule
DummymoduleB
Thermal sensor: +KTY/PTC/TKO1
C
Brake +/AC2
Brake -/AC3
Rectifier: Switching contact4
5
Thermal sensor: KTY/PTC/TKO6
ƒ HANmodular 40 A
Pin assignment
MeaningContactModule
Terminal board: U11
A Terminal board: V12
Terminal board: W13
DummymoduleB
Thermal sensor: +KTY/PTC/TKO1
C
Brake +/AC2
Brake -/AC3
Rectifier: Switching contact4
5
Thermal sensor: KTY/PTC/TKO6
6.11 - 53V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
HAN connector
Motor type
M☐☐MAZEM☐☐MAXXM☐☐MABZM☐☐MABR
Motor framesize
Terminal box with HAN connector
HAN-10EHANmodular
063-32063-42
HAN-10EHANmodular
HAN-10EHANmodular
071-32071-42
HAN-10EHANmodular
HAN-10EHANmodular
080-32080-42
HAN-10EHANmodular
HAN-10EHANmodular
090-32
HAN-10EHANmodular
HAN-10EHANmodular
100-12100-32
112-22
HANmodularHANmodular132-12132-22132-32
Motor terminal box with HAN connectors - built-on accessories as-signment: 4-pole / 6-pole motors
V01-en_GB-02/20146.11 - 54
MF three-phase AC motorsAccessories
6.11
HAN connector
Dimensions
ƒ Formotorswith connectors, the connector position can be selec-ted in accordance with the terminal box position.
ƒ Unless the connector position is specified, it will be supplied inposition 1.
Size
Motor
x4x3g4[mm][mm][mm]
6.005.00120063
8.007.00129071
19.011.0138080
23.015.0143090
24.016.0154100
21.513.5164112
4.5034.5233132
9.0039.0248160
6.11 - 55V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
HAN connector
Position of connector
Connector in position 3Connector in position 2
Connector in position 5Connector in position 4
V01-en_GB-02/20146.11 - 56
MF three-phase AC motorsAccessories
6.11
2nd shaft end
Dimensions, self-ventilated (4/6-pole)
Motor type
M☐☐MAZEBuilt-on ac-cessories M☐☐MABZ
Motor framesize
t2u2l8l7l4d7d5d4d4c4k3Δ k
j6h6
[mm][mm][mm][mm][mm][mm][mm][mm][mm][mm][mm][mm]
3.005.003.0019.034.0M514.01.1011.047071-32071-42
3.005.004.5019.034.0M514.01.109.0068080-32080-42
3.005.005.0019.034.0M514.01.109.0057090-32
3.506.0010.532.517.034.0M620.01.3018.571100-12100-32
3.506.007.0028.517.034.0M620.01.3016.084112-22
4.008.008.5042.024.546.0M1030.01.6024.5101132-12132-22132-32
During operation, appropriate measures must be taken to make fan coveropening safe.
1)
6.11 - 57V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
Protection cover
Dimensions, self-ventilated (4/6-pole)
Motor type
M☐☐MARSM☐☐MAIG
M☐☐MABSM☐☐MABIM☐☐MABRM☐☐MAXX
M☐☐MAAGM☐☐MABA
Motor framesize
g6k3Δ kΔ kΔ kΔ k
[mm][mm][mm][mm][mm][mm]
12311.0821296626063-32063-42
13812.0781227826071-32071-42
15616.01271379926080-32080-42
17615.01131319426090-32
19417.011213210731100-12100-32
21818.011115112131112-22
25720.013415614131132-12132-22132-32
V01-en_GB-02/20146.11 - 58
MF three-phase AC motorsAccessories
6.11
Protection cover
Dimensions, forced ventilated (4/6-pole)
Motor type
M☐☐MARSM☐☐MAIG
M☐☐MABRM☐☐MABSM☐☐MAXX
M☐☐MAAGM☐☐MABI
Motor framesize
g6Δ kΔ kΔ k
[mm][mm][mm][mm]
133169209169063-32063-42
150165202165071-32071-42
170168224168080-32080-42
188157210157090-32
210137198137100-12100-32
249216216135112-22
300226226140132-12132-22132-32
6.11 - 59V01-en_GB-02/2014
MF three-phase AC motorsAccessories
6.11
V01-en_GB-02/20146.11 - 60
MF three-phase AC motorsAccessories
6.11
15593808
Lenze SEHans-Lenze-Straße 1D-31855 AerzenPhone: +49 (0)5154 82-0Telefax: +49 (0)5154 82 28 00
www.Lenze.com
Recommended