View
220
Download
2
Category
Preview:
Citation preview
CURRICULUM VITAE
NAME: MOHAMED AFSAL.V.KPOSITION: Technical Engineer
PROFESSION: Mechanical Engineer
Mohamed Afsal is a Mechanical Engineer with 4 years experience assisting in the design, maintenance, administration of a variety projects associated with the variety of process and mechanical equipment. He has been involved in the tendering, design, procurement and project management and commissioning of various projects on plant. Afsal has extensive experience in fabrication, erection, quality control, Compressible and Non- compressible Fluid Flow, Pipeline design, Valve Selection, Material Takeoff, Equipment Specification, Procurement and Project management. Afsal continues to develop and is a hardworking and worthy asset to any design team.
KEY SKILLS
Project Engineering and Technical Development. Technical Evaluation of documents and quality assurance. Equipment Specification and Procurement Material Takeoff and P+ID Management Pipe Hydraulics & Sizing Compressible and Non-compressible
Fluid Flow, Including Pipeline Design, Pipe Specification Takeoff. Preparation of Equipment Layout, Process Piping Layout, Utility
Piping Layout. Evaluation of mechanical systems through the process of, Design
including the preparation of system models, sizing datasheets, technical specification, drawings and technical reports.
Good knowledge in softwares like AUTOCAD, Primavera, I-DEAS-8, PDMS, CEASAR-II.
Preventive maintenance by testing of fuel and Lube oil. Design of drainage system for Gas Turbines.
RECENT ASSIGNMENTS
Commissioning of Gas Treatment Facility in our plant. Commissioning of Gas Pipeline to our power plant. HVAC and MEP project for American Military Coaliation Compound Billeting Project Preparation of as build PID drawing for the plant and KKS tagging. Design and Installation of Compressed Air Supply to the Diesel
Generator Island. Assisted in Boroscopic Inspection to investigate the failure of Gas
Turbines.
Assisted in the technical evaluation of technical documents for the Natural Gas Supply Project. Testing, Inspection, maintenance and field repair of Turbomach Titan 130 Gas Turbines.
Version: 29/08/2012 Mohamed, Afsal Page 1 of 4
EDUCATION AND TRAINING
Bachelor of Technology in Mechanical Engineering from TKM College of Engineering, University of Kerala .
Post graduate program in Engineering& Management for Oil & Gas Industry , Zabeel Institute of Management and Technology
Advanced Diploma for Oil & Gas Industry by Academic College of London, United Kingdom
ASNT Level II certification in MT, UT, PT & RT.
CONTACT DETAILS
Address:Po Box no: 200410 Doha, Qatar
Phone: (974) 77139739E-mail: afsal.mohmd@gmail.com
CURRICULUM VITAE
Testing, Inspection and maintenance of SAKR Diesel Generators.
Preventive maintenance of machines through the daily laboratory testing of Fuel and Lube Oil.
Assisted in Design, Procurement, Fabrication and Commissioning of Advanced Power System (Diesel Generator) including the pipe sizing and specification, valve takeoff, P+ID’s, Process Design, co-ordinated the drafting and the quotations for the Engineering Team.
Design of drainage system for Gas Turbines.
Project Engineer for the installation of fire system for the diesel tanks.
Design Proposal to modify the drainage system of Gas Turbines including the drainage calculation, preparation of pipe sizing and specification, valve takeoff, P+ID’s and budgetary report.
Preventive maintenance of machines through the daily laboratory testing of fuel and lube oil.
Assisted in Planning, scheduling, Fabrication, Erection and commissioning of Service Water Pump House for Bhavini Nuclear Power Plant.
Assisted in Planning, scheduling, Fabrication, Erection and commissioning of utility tanks.
Planning, scheduling, resource controlling for the load testing of L&T Steam Generators for Bhavini Nuclear Power plant in early 2010.
Planning, scheduling, resource controlling for the erection of four L&T Steam Generators for Bhavini Nuclear Power plant in early 2010.
E
EXPERIENCE
Company: QIT POWERTECH – AUAB Gas Power Plant
Position: Technical Engineer Date: 07/2011 till Present
Duties: Worked as part of a team responsible for design, documentation of a various projects in the power plant. Assist in various Testing, Inspection and maintenance activities of Gas Turbines and Diesel Generators.
Key duties included:
Proactively coordinate all aspects of the project, determine new ways of project development and to
keep the Project Manager well informed of any updates.
Actively manage the activation of ongoing contracts with contractors and consultants to ensure all
services are provided as agreed within contracts.
Evaluation of mechanical systems through the process of, Design including the preparation of system
models, sizing datasheets, technical specification, drawings and technical reports.
Empirical Data Collection and Analysis, including the preparation of test procedures, record sheets, and
technical analysis presented in an engineering memo or report.
Review quotes for mechanical components for the power plant and prepare an evaluation report.
Evaluating vendor bids and drawings to ensure compliance with specifications.
Version: 29/08/2012 Mohamed, Afsal Page 2 of 4
CURRICULUM VITAE
Review of construction documentation including the review of welding procedures,
construction method statements and quality test results
Inspect the installation work in line with the specification, contract, construction best practice and
relevant codes and standards.
Dimensional Checks to ensure the construction is following the drawing and the engineers design intent.
Welding Quality check to ensure welds are leak tight, neat and done by qualified personnel.
General site supervision to ensure the healthy operation of the plant during construction.
Proactively engage with all internal departments to ensure all project requirements are delivered and
fulfilled.
Company: AMEC – American Corps of Engineers
Position: Technical Engineer Date: 08/2013 till Present
Duties: AUAB Power Plant supplied to AMEC as a Technical Engineer to look after their job (Build Coalition Compound Billeting for Military Accommodation).
Key duties included:
Review technical documents and submittals from subcontractor and make sure that it’s in line with
American military specifications.
Site inspection.
Supervision of HVAC, MEP and Fire Fighting installation for the American Corps of Engineers
Material Inspection to make sure that it’s in line with American military specifications.
Company: Technofab Engineering LTD (Bhavini Nuclear Power Plant)
Position: Site Engineer Date: 07/ 2010 – 06/2011
Duties: Worked as part of a team responsible for the Planning, Scheduling, Resource control, Quality Control and general supervision for the fabrication and erection work on site. Key duties included:
Planning and scheduling of the works Carrying the work according to the schedule. Placing tender and quotations for the new work. Monthly bill preparations Preparation of Mechanical Workshop, Drawing prior to submitting to Consultant for approval Prepare material submittals for approval Communicate all commercial and technical requirements to designers Follow-up/review/approval on design drawings
Version: 29/08/2012 Mohamed, Afsal Page 3 of 4
CURRICULUM VITAE
Quantity take-off and initiate purchase orders to satisfy specified requirements of the project Major material order and tracking
Monitor the availability of the types and quantities of material required on site. Inspection of materials received on site to ensure conformity with approval and project
requirement Visual test of fit-up and DPT test after root and final weld.
LANGUAGES & PROFICIENCY
English - reading, writing and speaking (advanced)Arabic – reading and writing (basic)Hindi – reading, writing and speaking (advanced)Malayalam - reading, writing and speaking (advanced)Tamil - Speaking (basic)
COUNTRIES OF OVERSEAS EXPERIENCE
India (1 Years) Qatar (2 Years and 9 months )
Version: 29/08/2012 Mohamed, Afsal Page 4 of 4
Recommended