View
313
Download
3
Category
Tags:
Preview:
DESCRIPTION
The latest addressable fire alarm systems catalogue from Zeta Alarm Systems.
Citation preview
AddressableFire Alarm Systems
Contents
Introduction 3-7
Premier AL 1-4 Loop Analogue Addressable Fire Alarm Panel 8-9
Premier AL 5-8 Loop Analogue Addressable Fire Alarm Panel 10
Premier AL: Addressable System Network 11
Premier AL: Alarm Manager Graphics System 12
Simplicity Plus Analogue Addressable Fire Alarm Panel 13
Zeta TCP/IP Communicator 14
Premier Addressable Repeater Panel 14
Simplicity Micro Analogue Addressable Fire Alarm Panel 15
Fyreye Extra Analogue Addressable Combined Smoke & Heat Detector 16
Fyreye Extra Analogue Addressable Optical Smoke Detector 17
Fyreye Extra Analogue Addressable Heat Detectors 18
Addressable Remote Indicator LED 19
Zeta Common Sounder Base & Zeta Common Combined Sounder & Flasher Base 20
Fyreye Common & Isolator Bases 21
Fyreye Addressable Reflective Beam Smoke Detector 22
Addressable Manual Call Point 23
Addressable Weatherproof Manual Call Point 24
Zeta Addressable Explosion Proof Break Glass Unit 25
Zeta Addressable Securetone 2 Sounder 26
Zeta Addressable Securetone 2 Combined Sounder & Flasher 27
Zeta Addressable Securetone 2 Addressable Flasher 28
Maxitone Addressable Sounder & Sounder Flasher 29
Zeta Common Addressable Input Unit 30
Zeta Addressable Input Output Units 31
Zeta Addressable Sounder Circuit Controller 32
Zeta Addressable Zone Monitoring Units 33
Zeta GSM Communicator 34
Loop Powered Door Magnet 35
Future Products 36-37
Product Compatibility Chart 38
Device Current Consumption 39
Cable Comparison 39
Notes 40-42
2
IntroductionZeta Alarm Systems, a trading name of GLT Exports Ltd, was founded in 1985 and is a privately held UK manufacturer of Fire Alarm, Gas Detection and Emergency Systems.
Our brand name is well known throughout the industry and is acclaimed in over forty countries worldwide. We are currently represented in the UK, Europe, Africa, the Middle East, Southern Asia & South America and this list continues to grow.
Complete System SupplierTo meet the requirements of our ever-changing market, we pride ourselves on being a complete system supplier. This means our customers can rely on us for their entire system requirements.
One of the main advantages of using a complete system supplier, compared with a component supplier, is that system wide compatibility is assured and there is one point of contact.
Marketing our products as systems has played a vital role in our worldwide success.
The FutureOur continued inward investment and constant endeavour to offer the very best products is recognised by our increased turnover and profit margin year-on-year. Our mission is to support our existing & future customers by providing them with the highest quality products, at the most competitive prices.
Customer Support & Product WarrantyWe value our customers greatly and to ensure they have the best experience we have a dedicated support team who are able to assist with sales, technical or logistical queries.
Our products carry a full 24 month manufacturers’ guarantee from the date of purchase. Our network of authorised agents is fully trained on the use of our products and will provide a helpful & friendly service.
Research & DevelopmentAs with all electronic equipment there is an ever present drive to manufacture products that are increasingly effective whilst becoming more cost sensitive. To meet this objective we spend a significant percentage of our profits on the continued development of products, whether it be introducing new items, or improving existing ones. We have a team of engineers & designers all of whom have vast industry knowledge & experience.
As a manufacturer we always follow the market needs closely to evaluate how we should adapt our product range. This, combined with welcomed customer feedback, has proved to be a successful formula for meeting the current and future industry needs.
Statement Of Quality PolicyWe maintain a Quality System, which conforms to BS EN ISO9001:2008. We are committed, where applicable, to manufacture in compliance with all appropriate legislation & regulatory requirements.
3
Introduction To Addressable Fire Alarm Systems
Fire Detection & Alarm Systems BS5839
Addressable fire alarm systems have traditionally been associated with the larger, more complicated applications. However, with downward price trends, they have become feasible for smaller systems that would have historically been designed with conventional fire alarm equipment.
Protocol StatementZeta Protocol is unique to Zeta Alarm Systems. All Zeta addressable devices can only be installed on Zeta control panels. No mixing with any other manufacturers’ products or control panels is permitted and warranty will be void.
What are the advantages of an addressable system over a conventional alternative?
Each device communicates directly with the control panel, so it knows the exact location of any fire or fault reported.
Each device can be assigned a courtesy label to help identify the device (for instance “Reception”).
Each detector reports a smoke value and the panel then decides whether this is an alarm. This allows some panels to make detectors more or less sensitive according to current conditions or time of day.
All devices (detectors, manual call points, sounders & interfaces) are all connected on the same loop of wires.
Detectors are assigned to zones by the panel, which allows for easier zone changes if the building layout is altered at a future date.
Addressable panels typically have an event history which logs past system events.
Some addressable panels allow for complicated cause & effect programming, where outputs are only triggered by certain detectors.
Risk AssessmentThe ‘Fire precautions (Workplace) Regulations’ require any business employing five or more persons to hold a written ‘Fire Risk Assessment’ and ‘Emergency Plan’. This must be periodically reviewed.
The local fire brigade can enforce compliance, and close any building that does not meet this act.
In the event of a fire in a building without a written ‘Fire Risk Assessment’, those responsible may face fines and imprisonment, and/or private litigation.
What the law requires you to do:
Complete a fire risk assessment for your work place (considering all employees, the public, disabled people and people with special needs).
Identify and record any significant findings or persons at risk.
Provide and maintain fire precautions.
Provide information, instruction and training.
Nominate persons responsible to implement your emergency plan.
Consult employees about the above nominations and your proposals to improve fire precautions.
Inform other employees who may have work places in the building about any significant risks which may affect their safety and co-operate with them to reduce/control these risks.
If you are not an employer, but control premises which contain more than one workplace, you are responsible for complying with fire regulations.
You must establish a suitable means of contacting the emergency services.
Your employees must co-operate to ensure the workplace is safe from fire and its effects.
4
If the total floor area is greater than 300m2:
The maximum area for a zone is 2000m2
If a stairwell (or similar) extends beyond one floor it should be a separate zone.
If a zone covers more than one fire compartment then the zone boundaries should follow the compartment boundaries.
The search distance within the zone in order to ascertain the position of the fire should not exceed 60m. Remember that the use of Remote Indicator lamps may help to reduce the distance travelled.
If a building is divided between occupiers, zones must not be shared between them.
System Zoning Information
60m Max.
Manual Call PointsA ‘Manual Call Point’ is a device which enables personnel to raise an alarm in the event of a fire incident by pressing a frangible element to activate the alarm system.
Manual Call Points should be installed at a height of 1.2m above floor level at easily accessible, conspicuous positions, on exit routes, at the entry floor landings of staircases and at all exits to the open air.
Manual Call Points should be spaced so that one may always be found within a maximum distance of 45m apart or 25m for disabled person.
1.2m - 1.4m
45m Max. or25m Max. for disabled person
The following guide lines should be observed:
If the total floor area of the building is less than 300m2 then the building needs only one zone, regardless of the number of storeys.
In order to aid identification of the source of a possible fire, the protected building should be divided into ‘zones’. When deciding on a suitable zoning scheme for a building, consideration should be given to the size, any existing fire routines, escape routes, zone accessibility, and structural fire compartmentation.
5
Detector InformationAutomatic DetectorsWhen deciding on the type of detector to be used in any area it is important to remember that the detector has to discriminate between a genuine fire and the normal conditions existing therein.
Smoke DetectorsIn open spaces under flat horizontal ceilings, every point should lie within 7.5m of a smoke detector.
Smoke detection should be generally avoided in the following areas to avoid unwanted alarms. They should be protected by means of other detectors such as heat detectors.
Contamination in dusty areas may cause unwanted alarms and reduce the life of the detector.
Damp or humid conditions such as showers, bathrooms and external areas should be avoided as the water vapour may cause unwanted alarms and reduce the life of the detector.
Detectors should not be mounted where gases, vapours or fumes are present.
Detectors should never be used at low temperature where ice or condensation can affect detector sensitivity.
Kitchens, garages, welding shops and boiler houses should generally be avoided.
5.3m
10.6m
112m² (10.6m x 10.6m)
7.5m
Room boundary
Heat Detectors GeneralIn open spaces under flat horizontal ceilings, every point should lie within 5.3m of a heat detector.
Heat detectors are designed to either detect a rapid rise in temperature or to operate at a fixed temperature. Although they provide a slower response time than smoke detectors they do provide a method of protection for areas where smoke detectors cannot be used.
Heat detectors should not be used for the protection of life or where extensive property loss may be expected.
‘Rate of Rise’ Heat Detectors‘Rate of Rise’ heat detectors respond to both rapid increases of temperature and to fixed top temperature.
‘Fixed Temperature’ Heat DetectorsFixed temperature heat detectors are available with different temperature settings, and are normally installed in kitchens, boiler rooms, etc.
3.8m
7.5m
56.3m² (7.5m x 7.5m)
5.3m
Room boundary
6
Fire Alarm SoundersFire Alarm Sounders should be installed throughout the building with an even distribution, to generally provide a minimum sound level of 65dB(A) or 5dB(A) above any background noise which is likely to persist for more than 30 seconds.
Where the alarm may have to arouse sleeping persons e.g. Hotel bedrooms, nursing homes, etc, a minimum sound level of 75dB(A) is required, at the bed head with all the doors shut.
All fire alarm sounders in a building should produce the same sound, distinct from any other audible warning devices in the building.
Where fire alarm sounders are required in extremely noisy areas e.g. Machine shops, it may be necessary to install additional ‘Visual Indication Beacons’.
65dB(A)@ 500Hz - 1000Hz
+5dB(A)@ 500Hz - 1000Hz
Background noise
75dB(A)
Detection In Apex RoofsIf the ceiling is pitched or sloping, smoke will tend to rise towards the highest point (apex) of the roof, therefore detection should be placed in the apex. As the slope tends to reduce the delay before smoke or heat reaches the detectors, it is permissible to use a greater spacing between the detectors mounted there.
Limits of Ceiling Height
Small Apex= Standard Spacing
Apex <150mm
Heat Detector
Apex <600mm
SmokeDetector
Apex >150mm
Heat Detector
Apex >600mm
SmokeDetector
Large Apex= Extended Spacing
CablingThe operation of a Fire Alarm and Detection System’ depends on the cabling and connections between the components. It is essential that connection between Manual Call Points and Detectors function correctly when they are operated.
Cables within the system are required to function correctly for significant periods after being attacked by fire. These include the power supply cables to the control panel, the detection circuits and the fire alarm sounder circuits. Thus the cables chosen must be correctly rated to withstand these conditions.
7
Premier AL 1-4 Loop Analogue Addressable Fire Alarm Panel (PR-AL/1, PR-AL/2, PR-AL/3, PR-AL/4)
The Premier AL analogue addressable panels are a powerful yet user-friendly series of control panels. They are designed to a high standard with LPCB approval to EN54, parts 2 & 4. Each panel in this modular series has considerable processing ability but is easy to install, programme and operate. This is supported by comprehensive support documentation. Panels are housed in steel enclosures and are finished in hardwearing epoxy paint.
This panel is ideally suited to installations which require very complex sounder and control/shutdown functions. The panels are programmable to meet individual site requirements by means of a cause & effect matrix. This is downloaded from a PC, using the Cause & Effect Edit Programme. Text may be edited via a keyboard or downloaded from a PC.
The Premier AL has a 4 line x 20 character backlit LCD display, showing the first and most recent event. Other events may be reviewed using the More Messages facility. User controls are accessed by means of keyswitch-enabled membrane controls, with password protection for engineer purposes.
Each panel has a high level of processing power and each loop has its own processor. The panel allows up to 126 addresses per loop. All addresses on a loop may be used for output functions, with 3 independently programmable output bits per address.
Up to 248 user-definable panel inputs and relay/programmable alarm outputs can be provided via expansions boards. Many useful testing and service functions are also provided. All events may be recorded on the optional printer and zonal indications are included as standard.
There is a complete range of compatible accessories available to support the Premier AL panels to meet most customer requirements. The addition of a network card to the panel will allow monitoring, indication and control of the functions of a networked installation, allowing signals to be distributed around a large site.
Features 1-4 loop addressable fire alarm panel (each with a 126 device capacity)
LPCB Approved to EN54 parts 2 & 4
Devices can be grouped into 32 zones
Network up to 15 panels (giving a total of 60 loops)
Extensive mode change options by day/night and special group allocation
Windows based, full upload/download PC software package
500mA output per loop with highly stable voltage platform, even under mains-failed conditions
Powerful processing and extensive panel and loop I/O capability
User-friendly controls (enabled by key switch) and a clear, unambiguous screen (4 x 20 character LCD display)
Membrane facia with tactile switches
Complies with EMC and LVD Directives
8
Addressable Fire Alarm Systems /
Optional extrasPanel Printer:
Add to panel to have a permanent record of all events printed.
Part No. Model Description
37-201P PR-AL/1P Premier AL 1 Loop Addressable FACP, c/w Printer
37-202P PR-AL/2P Premier AL 2 Loop Addressable FACP, c/w Printer
37-203P PR-AL/3P Premier AL 3 Loop Addressable FACP, c/w Printer
37-204P PR-AL/4P Premier AL 4 Loop Addressable FACP, c/w Printer
Repeater interface card:
Fit to panel to allow repeater panels to be added (supplied with repeater).
Network interface card:
Fit to panel to allow up to 15 panels to be networked and to add Global Network Repeater Panels.
The Premier AL 1-4 loop panel can use the Standard Repeater (for a stand alone panel) or a Global Network Repeater (for a networked system).
Part no. Model Description
37-250P REP-AL/P Premier AL Repeater Panel
37-255 REP-AL/G Premier AL Global Network Repeater
Technical Specification
Model PR-AL/1 PR-AL/2 PR-AL/3 PR-AL/4
Part No. 37-201 37-202 37-203 37-204
Detection Loops 1 2 3 4
Repeater Model Premier AL Repeater (REP-AL)
Repeater Part No. 37-220
Mains Voltage 230V AC + 10% / -6% @ 50/60 Hz
System Voltage 28V DC (nominal)
Loop Voltage 24V DC + 9V AC Signal (nominal)
Sounder Alarm Output 2 x 1 A Common @ 24V DC (nominal)
Fault Relay 1 x Relay SELV @ 1A maximum
Fire Relay 2 x Relay SELV @ 1A maximum
Zone Capacity 32 programmable zones
Sounder EOL 3K9 (Orange, White, Red, Gold)
Charge Voltage 27.1 Volt (with battery disconnected)
Charger Size 3 Amp
Aux Supply 500mA max
Batteries (Min. Size) 2 x 12V, 12AH SLA Batteries
Ingress Protection IP43
Enclosure 410 W x 480 H x 144 D (mm)
Weight 15kg (Excluding Batteries)
Premier AL 1-4 Loop Analogue Addressable Fire Alarm Panel (PR-AL/1, PR-AL/2, PR-AL/3, PR-AL/4)
9
Addressable Fire Alarm Systems /
Premier AL 5-8 Loop Analogue Addressable Fire Alarm Panel (PR-AL/5, PR-AL/6, PR-AL/7, PR-AL/8)
The Premier AL 5-8 loop analogue addressable fire alarm control panel has been designed to meet the demand for larger centralised panels, rather than smaller panels distributed on a network.
The panel consists of a large enclosure that houses two 4 loop panels (PR-AL/4) that are networked together and run off a single power supply. The second panel has its screen facing inwards behind the blank door (due to this configuration it is recommended to use the network repeater with this control panel).
This panel will occupy 2 network addresses. When viewing the loop contents, loop 1 to 4 can be viewed from the main screen and loops 5 to 8 must be viewed using the internal display.
Features 5-8 loop addressable fire alarm panel (each loop with a 126 device capacity)
Complies fully to EN54 parts 2 & 4
Consists of 2 PR-AL/4 panels networked together (where each offers the same functionality)
Model PR-AL/5 PR-AL/6 PR-AL/7 PR-AL/8
Part No. 37-211 37-212 37-213 37-214
Supply Voltage 230V AC +/- 10%
System Voltage 28V DC (Nominal)
Addressable Loops 5 6 7 8
Loop Voltage 24V + 9 V Data
Loop Capacity 500mA
Sounder Output 4 x 1A @ 24V DC
Sounder EOL 3K9 (Orange, White, Red, Gold)
Sounder Delay 0 to 9 Minutes
Fire Relay 4 x Relay, SELV @ 1A
Fault Relay 2 x Relay, SELV @ 1A (Normally Energised)
Aux Supply 2 x 500mA (Monitored)
Other ConnectionsClass Change Input, Remote Fault Input, Remote Evacuate Input, Remote Reset Input, Remote Silence Input
Operating Temperature -0°C to +50°C
Enclosure Size 960 x 480 x 144mm
Weight 28 KG (Excluding Batteries)
Display to view contents of loops 1 to 4
POWERSUPPLY ON
FIRE
ALERT
SYSTEMFAULT
GENERALFAULT
ALARM FAULT/DISABLEMENT
DELAY ON
MAINTENANCE
GENERALDISABLEMENT
BUZZERSILENCED
TEST
MOREMESSAGES
EVACUATE
SILENCE / RESOUNDALARMS
SCROLLMESSAGES
SILENCEBUZZER
OVERRIDEDELAY
TESTALARMS
TESTDISPLAY
ACCESS MENUMENU UP
MENU DOWN
RESET
ESCAPE
ENTER
ACCESSCONTROLS
ZONAL FIRE AND FAULT INDICATION
1
2
3
4
5
6
<
>
I
O
1 2 3 4 5
17 18 19 20 21
6 7
22 23
8 9
24 25
10 11
26 27
12 13
28 29
14 15
30 31
16
32
1
2
3
4
5
17
18
19
20
216
722
23
8
9
24
25
10
11
26
27
12
13
28
29
14
15
30
31
16 32
POWERSUPPLY ON
FIRE
ALERT
SYSTEMFAULT
GENERALFAULT
ALARM FAULT/DISABLEMENT
DELAY ON
MAINTENANCE
GENERALDISABLEMENT
BUZZERSILENCED
TEST
MOREMESSAGES
EVACUATE
SILENCE / RESOUNDALARMS
SCROLLMESSAGES
SILENCEBUZZER
OVERRIDEDELAY
TESTALARMS
TESTDISPLAY
ACCESS MENUMENU UP
MENU DOWN
RESET
ESCAPE
ENTER
ACCESSCONTROLS
ZONAL FIRE AND FAULT INDICATION
1
2
3
4
5
6
<
>
I
O
1 2 3 4 5
17 18 19 20 21
6 7
22 23
8 9
24 25
10 11
26 27
12 13
28 29
14 15
30 31
16
32
1
2
3
4
5
17
18
19
20
216
722
23
8
9
24
25
10
11
26
27
12
13
28
29
14
15
30
31
16 32
Display to view contents of loops 5 to 8
10
Addressable Fire Alarm Systems /
Premier AL: Addressable System Network
The addressable system network has the facility to monitor, indicate and control the functions of a fire alarm installation, thus allowing signals to be distributed around a large site.
The network operates as a global communication system and does not require a master panel or computer. This approach reduces cost and no single panel/equipment failure will disable the entire system.
Each item of equipment connected to the network is referred to as a node. Each node can be either active or passive. Up to 15 active nodes plus an additional 17 passive nodes may be connected.
Each node is programmed independently to listen, respond to, or ignore any or all of the messages sent by the other nodes on the network.
The network uses RS 485 data communication. Up to a total network cable length of 5km is possible. All panels will continue to function in stand-alone mode, even if the network fails.
The use of a networking system will allow individual parts of the site to be installed and commissioned prior to connection to the network.
The operation of the network is such that each node has total stand alone capability in that its local operation is not directly affected by its connection to or disconnection from the network. The ability of a local control panel to observe events means that it can be programmed to respond to events elsewhere on the network. The effect of this capability is that any control panel is able to respond to any sensor device connected anywhere on the network. This provides a possible effective 60 loop control panel distributed around a single site as a number of smaller units. Network repeater panels provide the ability to observe and control elements of the network via a compact unit which may be conveniently mounted at manned control points and still provide all essential display and control facilities.
Features All talk - selective listen Peer-to-Peer network wide communication
No master panel or PC required and thus no single device of failure
Network together:-
Premier AL panels
Network repeaters
Alarm manager graphics systems
Up to 15 active panels or 60 loops may be networked together plus an additional 17 passive nodes
Premier AL panels, network repeaters and alarm manager graphics systems may be configured as active or passive
Network communication takes place over a single pair of wires providing a link to all nodes.
The overall concept can be described as ‘all talk - selective listen’, which means that every event that occurs on any node is transmitted into the network. Each node then decides (via programming) whether or not it is required to take any action. During quiescent conditions all active nodes signify their presence on the network by generating default messages.
11
Addressable Fire Alarm Systems /
Premier AL: Alarm Manager Graphics System
The Alarm Manager system is designed as a user-friendly tool to view a potentially complex fire situation.
Once the system has been set up on-site by a qualified engineer, the keyboard is no longer required, as all event maps and user buttons will appear on the screen as necessary to manage the particular event taking place.
The end user, who may not be technically-minded, will still be able to operate the system on a daily basis. All the system’s management functions are protected via up to 7 different password levels.
When an event occurs, the first map will appear along with the relevant user controls. There are up to 5 different maps for each sensor showing the device location in different degrees of accuracy and also a procedure page which is allocated to each type of event as prioritised within the configuration menu. There is also an instantly available current event log.
Features For use with all Premier AL protocol analogue addressable control panels
End-user friendly
Up to 5 map pages per sensor
Up to 32 devices or groups of devices per map page
Up to 999 maps
2,000 event historic log
All functions protected via up to 7 different password levels
Identifies each user separately
Up to 3 networks may communicate with the Alarm Manager
Technical Specifications
The full Alarm Manager package includes;
PC
17″ TFT monitor
Network interface for 1 network
Installed Alarm Manager software
12
Addressable Fire Alarm Systems /
Simplicity Plus Analogue Addressable Fire Alarm Panel (SP-64, SP-126)
The Simplicity Plus is the ideal introduction to the world of addressable fire alarm panels.
As its name suggests, it has been designed with ease of use in mind, using pre-programmed values for its programming options. The installer simply needs to configure the loop and enter text labels via the built in keypad (optional).
The Simplicity Plus is available in 64 or 126 device versions and has user definable zones, option for zonal or common alarm operation, options for I/O operation, alarm verification and user selectable languages.
It can be connected to an RS232 desktop printer for real time event log printing (Epson LQ300+ recommended) and it can also drive a serial repeater model AD-REP (Part No. 37-156).
Zonal AddressingAll devices are assigned to a specific zone based on their address. This removes a programming step and helps to streamline the commissioning process. The following table outlines which addresses fall in which zones.
Loop & Address SP-126 SP-64
1: Address 1-16 Zone 1 Zone 1
1: Address 17-32 Zone 2 Zone 2
1: Address 33-48 Zone 3 Zone 3
1: Address 49-64 Zone 4 Zone 4
1: Address 65-80 Zone 5 -
1: Address 81-96 Zone 6 -
1: Address 97-112 Zone 7 -
1: Address 113-126 Zone 8 -
Features Single loop addressable fire alarm panel (with either 64 or 126 device capacity)
Complies fully to EN54 parts 2 & 4
User definable zones
Option for zonal or common alarm operation
Options for I/O operation
Alarm verification (help prevent false alarms)
User selectable languages
Set of changeover relay contacts for fault condition
Set of changeover relay contacts for fire condition
2,048 event log (fire & fault)
Zone or device disablement
One man test mode
Plug & play, no need for any special tools or laptop for commissioning
Fully integrated QWERTY keypad
All associated devices are loop powered
Flame retardant ABS plastic
Model SP-64 SP-126
Part No. 37-160 37-165
Supply Voltage 230V AC +/- 10% 230V AC +/- 10%
System Voltage 24V DC (Nominal)
Number of Loops 1
Loop Capacity 64 Devices 126 Devices
Number of Zones 4 8
Sounder Output Addressable Sounders Only
Fault Output 28 V Repeat Output to Drive Relay (Normally Energised)
Fire Output 28 V Repeat Output to Drive Relay
Operating Temperature -0°C to 50°C
Enclosure Size 355 x 275 x 100mm
Weight 3.5 Kg
Alarm VerificationTo help prevent false alarms causing a full evacuation, any smoke detector can be set to alarm verification mode with a time delay of between 30 seconds and 4 minutes. Should any of these detectors go into alarm then only the detector’s LEDs and sounder/flasher base (if connected) will activate. Should the alarm not be cleared with this time delay then a common alarm will occur.
13
Addressable Fire Alarm Systems /
Premier Addressable Repeater Panel (AD-REP)
The Premier addressable repeater Panel is a serial repeater panel for use with the Premier AD and Simplicity Plus analogue addressable fire alarm panels.
It is a display only repeater (no controls) which indicates power, general fault and general fire via LEDs. Information about the device in fault or alarm is displayed on the LCD screen.
It also has an internal buzzer to indicate that it requires attention.
Compatible Panels NPAD - Premier AD Analogue Addressable Fire Alarm Panel
SP-64 - Simplicity Plus Analogue Addressable Fire Alarm Panel
SP-126 - Simplicity Plus Analogue Addressable Fire Alarm Panel
Features Addressable repeater panel (display only, no controls)
Complies fully to EN54 parts 2 & 4
Model AD-REP
Part No. 37-156
Supply Voltage 20 – 30 V DC
System Voltage 29V DC (Nominal)
Connections Supply + ,Supply –, Data +, Data -
Operating Temperature -0°C to 50°C
Enclosure Size 355 x 275 x 70mm
Weight 1 KG
Zeta TCP/IP Communicator
The Zeta TCP/IP Communicator connects to the serial port of a Simplicity Plus panel (SP-126 or SP-64) to allow the panel to broadcast alarm or fault information to a monitoring PC set on any TCP/IP network.
The Simplicity panel can transmit the following information;
Device alarm (including loop & address information)
Device fault (including loop & address information)
Panel reset
Loop reconfigured
Loop wiring fault
Power supply fault
Earth fault
Clock reset
Evacuate started
Using the Zeta Alarm Watch software, multiple panels can be monitored from a central PC. The panels can be grouped by company to give a structured display on the PC.
Future development of this product will see other panels being able to interface with the TCP/IP communicator, starting with the Premier Quatro panel in early 2010.
14
Addressable Fire Alarm Systems /
Simplicity Micro Analogue Addressable Fire Alarm Panel (SP-M)
The Simplicity Micro is a unique concept that provides the best possible entry level solution for addressable fire alarm systems. It is directed primarily towards small installations, where traditionally the use of addressable systems would have been considered cost prohibitive. The Micro is based upon the successful Simplicity 64 & 126 fire alarm panels and incorporates many of the larger systems features. These include single loop connection, minimal commissioning & configuration, 20 character label for each connected device and a 2,048 history event log.
Alarm VerificationTo help prevent false alarms causing a full evacuation, any smoke detector can be set to alarm verification mode with a time delay of between 30 seconds and 4 minutes. Should any of these detectors go into alarm then only the detector’s LEDs and sounder/flasher base (if connected) will activate. Should the alarm not be cleared with this time delay then a common alarm will occur.
Features Complies fully to EN54 parts 2 & 4
CE marked
User definable zones
Option for zonal or common alarm operation
Options for I/O operation
Alarm verification (help prevent false alarms)
User selectable languages
Slimline enclosure
Flame retardant ABS plastic
Set of changeover relay output in fault condition
Set of changeover relay output in fire condition
Each detector can have a sounder or combined sounder & flasher base
2,048 event log (fire & fault)
Zone or device disablement
One man test mode
Plug & play, no need for any special tools or laptop for commissioning
Fully integrated keypad
All associated devices are loop powered
Model SP-M
Supply Voltage 230V AC +/- 10%
System Voltage 24V DC (nominal)
Number of Loops 1
Loop Capacity 32 devices
Number of Zones 4
Sounder Output Addressable sounder only
Fault Output 28 V repeat output to drive relay (normally energised)
Fire Output 28 V repeat output to drive relay
Operating Temperature -0°C to 50°C
Enclosure Size (mm) 355 x 275 x 70mm
Weight 2.8 Kg
Range of standalone addressable detectorsCompatible with conventional detectors to save money
Addressable Optical Detector
FEAOE2000
Addressable Opto-Heat Detector
FEAOH2000
AddressableRate of Rise Heat Detector
FEAHE2000
AddressableFixed Heat Detector
FEAHHE2000
AddressableManual Call Point
ZT-CP2/AD
Securetone Micro AddressableSounder & Flasher Base
SM-ASFIB
Securetone Micro Addressable Sounder Base
SM-ASB
Addressable Maxitone Sounderavailable in Red ZAMT/R
or White ZAMT/W
Addressable MaxitoneSounder & Flasher
ZAMTF/R
AddressableSecuretone 2 Sounder
available in Red ZAS2/Ror White ZAS2/W
Addressable Securetone 2Sounder Flasher c/w Isolator
available in Red ZAS2/RFIor White ZAS2/WFI
Range of input/output
modulesSimplicity MicroSP-M
15
Addressable Fire Alarm Systems /
Fyreye Extra Analogue Addressable Combined Smoke & Heat Detector (FEAOH2000)
The Fyreye Extra analogue addressable combined smoke & heat detector works with the Zeta Addressable Protocol and is compatible with all current Zeta analogue addressable control panels.
The FEAOH2000 is a dual type detector, which reacts to both smoke & heat independently. It is suitable for use in places where traditionally an ionisation type detector may have been chosen.
It comes supplied with a locking grub screw to prevent unauthorised head removal.
Features Addressable combined smoke & heat detector
DIFT approved
Complies fully to EN54 parts 5 & 7
Twin LEDs to improve alarm indication
Includes locking grub screw to prevent unauthorised head removal
Model FEAOH2000
Part No. 80-140
Detector Class Optical Smoke, Rate of Rise & Fixed Heat
Design Standard EN54 Part 5 & Part 7
Approval DIFT
Operating Voltage 17-28V DC (Plus Protocol Signal)
Quiescent Current 520µA
Alarm Current 2.3mA
Operating Temperature -10°C to +50°C
Minimum Continuous Temperature 0°C
Maximum Humidity 95% RH Non Condensing
Return Value of 55 (Nominal Alarm Level) 2.4% Obscuration per metre
Return value of 75 Rate of Rise Trigger
Return value of 95 Fixed heat trigger
Coverage 100m²
IP Protection Rating IP43
Start-up Time 30 Seconds
Size, Diameter x Height (with base) 100 x 48 mm (101 x 64 mm)
Weight (with base) 100g (158g)
50mm100mm
16
Addressable Fire Alarm Systems /
Fyreye Extra Analogue Addressable Optical Smoke Detector (FEAOE2000)
The Fyreye Extra analogue addressable optical smoke detector is particularly suitable for detecting optically dense smoke, involving materials such as soft furnishings, PVC, plastic, foam and all similar materials which produce small visible particles (0.5 to 10 μm).
The FEAOE2000 works with the Zeta Addressable Protocol and is compatible with all current Zeta analogue addressable control panels.
It also comes supplied with a locking grub screw to prevent unauthorised head removal.
Features Addressable optical smoke detector
DIFT approved
Complies fully to EN54 parts 5 & 7
Twin LEDs to improve alarm indication
Includes locking grub screw to prevent unauthorised head removal
Model FEAOE2000
Part No. 80-125
Detector Class Optical Smoke
Design Standard EN54 Pt 7
Approval DIFT
Operating Voltage 17 – 28V DC (Plus Protocol)
Quiescent Current 480μA
Alarm Current 2.3mA
Operating Temperature -10°C to +50°C
Minimum Continuous Temperature 0°C
Maximum Humidity 95% RH Non Condensing
Return Value of 55 (Nominal Alarm Level) 2.4% Obscuration per metre
Coverage 100m2
IP Protection Rating IP43
Start-up Time 10 Seconds
Size, Diameter x Height (with base) 100 x 37 mm (101 x 53 mm)
Weight (with base) 95 g (153g)
37mm100mm
17
Addressable Fire Alarm Systems /
Fyreye Extra Analogue Addressable Heat Detectors (FEAHE2000 & FEAHHE2000)
FEAHE2000The FEAHE2000 is an analogue addressable rate of rise heat detector. It will respond with a value of 75 if the detector is triggered by a rate of rise alarm (that is a fast increase in temperature over a set period of time). The detector also responds to a fixed temperature of 57°C and will return a value of 95 if the detector is triggered by this condition.
FEAHHE2000The FEAHHE2000 is an analogue addressable fixed heat detector. It will respond with a value of 95 if the detector is triggered through a fixed heat alarm of 90°C.
Features DIFT approved
Complies fully to EN54 parts 5 & 7
Twin LEDs to improve alarm indication
Includes locking grub screw to prevent unauthorised head removal
48mm100mm
Model FEAHE2000 FEAHHE2000
Part No. 80-135 80-136
Detector Class Rate of Rise & Fixed Heat Fixed Heat Only
Design Standard EN54 part 5
Approval DIFT -
Operating Voltage 17 to 28V DC (Plus Protocol)
Quiescent Current 440 μA
Alarm Current @ 24V DC 2.4mA
Operating Temperature -10°C to 50°C
Minimum Continuous Temperature 0°C
Maximum Humidity 95% RH non condensing
Alarm Condition Rate of Rise or Fixed Heat trigger @ 57°C Fixed Heat trigger @ 90°C
Compatible Bases FE-CB Common Base, FE-IB Isolator Base, FEA-RB Addressable Relay Base, FEA-SB Addressable Sounder Base, FEA-SFB Addressable Sounder Flasher Base
Coverage 50m2
IP Protection Rating IP43
Start-up Time 30 seconds
Size, Diameter x Height (with base) 100 x 48 mm (101 x 64 mm)
Weight (with base) 100g (158g)
18
Addressable Fire Alarm Systems /
Addressable Remote Indicator LED (ZTA-LE2, ZTA-LE2/10 & ZTA-LE3)
ZTA-LE2 & ZTA-LE2/10
The ZTA-LE2 remote LED indicator has been designed so that it is loop powered and can be installed anywhere on the loop (it can either be connected as part of the loop, or as a spur from the detector it is indicating). This minimises the amount of wiring from a detector to its remote indicator.
It has the same address as the detector it is indicating and will light whenever the panel tells the detector to do so.
There is also a version that will listen to a number of consecutive addresses, designed for when there are more than one detector out of sight.
ZTA-LE3
The ZTA-LE3 is a low cost alternative to the fully addressable remote LED indicator ZTA-LE2.
Remote LEDs are used in installations where a detector going into alarm is likely to occur out of sight (for instance behind a locked door or in a ceiling void). The indicator will then show the location of the alarm.
The ZTA-LE3 is designed to work with addressable Fyreye detectors on the Premier AL panel only. They will need to be programmed to operate and can be triggered from either a single detector or a group of detectors.
Model ZTA/LE2 ZTA/LE2-10 ZTA-LE3
Part No. 48-020 48-020A 48-021
Input Voltage 17 - 33V DC
Quiescent Current 1.5 mA 0 mA
Alarm Current 10mA
Addresses Repeated 1 1-10 1
Colour White Plastic, Red LEDs
Operation Colour Red
Operating Temperature -0°C to 50°C
Maximum Humidity 95% RH N/C
IP Rating IP 43
Size (WxHxD mm) 86 x 86 x 23
Weight 40 g
L2
L1IOUT
L1IN -R
+
Remote Indicator-+
L2
L1IOUT
L1IN -R
Loop in fromFire alarm panel
L2
L1IOUT
L1IN -R
L2
L1IOUT
L1IN -R
L2
L1IOUT
L1IN -R
L2
L1IOUT
L1IN -R
Loop out to next detector or returnto panel.
Remote Indicator
Loop in fromFire alarm panel
Loop out to next detector or returnto panel.
-
17
65
43
28ON
+-+
-
17
65
43
28ON
Loop in fromfire alarm panel
Loop out to next detector or return to panel
Remote Indicator
+VE
LED
-VE
L1IN
L2
L1IOUT
R
ZTA-LE2 & ZTA-LE2/10
ZTA-LE3
19
Addressable Fire Alarm Systems /
Zeta Common Sounder Base & Zeta Common Combined Sounder & Flasher Base (ZTA-CSB, ZTA-CSFIB)
The Zeta addressable common sounder base is essentially an addressable sounder which does not take an address. Instead it listens to address 126 and responds to commands sent to this address.
The combined sounder & flasher version also includes a loop short circuit isolator, which minimises the number of devices that would be inoperative in the case of a short circuit on the loop.
There is no volume adjustment potentiometer, instead the sounder is supplied set to it’s maximum volume.
Although the sounder does not communicate with the control panel, it must be used in conjunction with an addressable detector. For monitoring purposes, the sounder is treated as a conventional sounder and monitored as part of the loop.
Features Complies fully to EN-54 part 3
Allows use of addressable detectors
Low current consumption (5.5 mA for combined sounder & flasher base)
Loop isolation option
Compatible with all Zeta addressable panels
No address to set
All sounder will start at the same time
Model ZTA-CSB ZTA-CSFIB
Part No. 42-510 42-515
Sound Output 85 dB @ 1 metre
Alarm Tone 800-970Hz (0.5s each)
Flasher Colour N/A Red
Flasher Rate N/A 0.3Hz
Operating Voltage 17-30V DC
Quiescent Current 0.4 mA 0.7 mA
Current Consumption During Alarm 4.0 mA 5.5 mA
Size, Diameter x Height 100 x 36 mm
Weight 155g
ZTA-CSB ZTA-CSFIB
20
Addressable Fire Alarm Systems /
Fyreye Common & Isolator Bases (FE-CB, FE-CB/S, FE-CB/D, FE-IB)
Features Common base which is compatible with all detectors
Available in 3 different sizes (standard, shallow & deep)
Model FE-CB FE-CB/S FE-CB/D FE-IB
Part No. 80-050 80-050S 80-050D 80-090
Supply Voltage 17-33V DC
Average Quiescent Current At 24V 0μA 35μA
Alarm Current At 24V 0mA
Isolated Current At 24V - - - 5.4mA
Operating Temperature -20°C to +90°C (non condensing or icing)
Max. Wind Speed Not affected
Connections L1in, L1out (not used), L2, -R (not used), Earth
Base Size (Diameter x Depth) 100mm x 15mm 100mm x 8mm 100m x 25mm 100mm x 15mm
Weights 48g 42g 61g 50.2g
FE-CB
FE-CB FE-CB/S FE-CB/D
FE_IB
Earth
L2
R- L1 In
L1 Out
Loop + Out
Loop - OutLoop - In
Loop + In
Loop - In
Loop + In
Loop - Out
Loop + Out
Earth
L2
R-L1In
L1Out- + + - -
In Out
FE-CB/D FE-IBFE-CB/S
21
Addressable Fire Alarm Systems /
Fyreye Addressable Reflective Beam Smoke Detector (ZT-50RA, ZT-100RA)
The Fyreye addressable reflective beam smoke detector comprises of a single unit incorporating an infrared transmitter and receiver. The signal is reflected by a prism and analysed for smoke presence. Should a predetermined level be reached, the detector will signal an alarm.
The system is designed to be mounted so that the beam will project between 0.3 and 0.6 metres below the ceiling and parallel to it. Lateral detection may be up to 7.5 metres either side of the beam.
Typical ApplicationsBeam detectors are generally used for two purposes; either to cover a wide-open space and/or in places where several regular smoke detectors would be aesthetically unacceptable. Such places include;
Shopping centres
Heritage sites
Churches or mosques
Museums
Leisure centres
Open Plan offices
Warehouses
Factories
Power stations
and more
Features 50 or 100 metre addressable reflective beam smoke detector
Vds approved
Complies fully to;
BS 5839 part 5
EN54 part 12
Single compact housing
Horizontal or vertical mounting
12-24V DC operation
Low current consumption
Latching or non latching alarm
Reflector targeting mode to ease set-up
Microprocessor controlled
Automatic contamination compensation
Selectable sensitivity
Robust construction
Model ZT-50RA ZT-100RA
Part No. 47-055 47-056
Supply Voltage 17-33VDC
Range 5-50 metres 50-100 metres
Quiescent Current 5mA
Operating Temp. -20°C to +55°C
Max. Humidity 95%RH N/C
Max. Wind Speed Not affected
Alarm Current 9 mA
Fire Output Analogue value to panel
Fault Output Analogue value to panel
Construction Flame Retardant ABS (Grey / Black). IP50
Detector Size 210 x 117 x 120 mm
Weight 0.7 kg
126mm 120mm
140m
m21
0mm
70mm
100mm
100m
m
9.5mm
22
Addressable Fire Alarm Systems /
Addressable Manual Call Point(ZT-CP1/AD, ZT-CP2/AD)
The ZT-CP2/AD is an addressable manual call point which has been engineered to comply with EN54 part 11.
It is a resettable call point that signals an alarm with a yellow flag entering the window area and a red alarm LED illuminating. The modern housing is supplied with a back box which has plenty of room for fitting the cables and also includes 2 x 20mm knockouts for glanded cable entry.
There are 2 versions available;ZT-CP1/AD - Which does not have the Perspex protective cover.
ZT-CP2/AD - Which has the protective Perspex cover in addition to a “snaplatch” catch that must to be broken off before the call point cover can be lifted (this acts as a deterrent to malicious activations and allows double action activation).
Features Addressable manual call point
Complies fully to EN54 part 11
Available with or without Perspex protective cover
Model ZT-CP2/AD ZT-CP1/AD
Part No. 43-305 43-306
Input Voltage 17-33V DC
Element Type Resettable
Quiescent Current 1.5 mA
Alarm Current 18 mA
Alarm Activation
Break Snaplatch
Lift Perspex
Press Element
Press Element
Operating Temperature -20°C to 50°C
Maximum Humidity 95% RH N/C
IP Rating IP 43
Size (WxHxD mm) 111 x 100 x 67 105 x 100 x 58
Weight 198 g 175 g
23
Addressable Fire Alarm Systems /
Addressable Weatherproof Manual Call Point (ZT-CP2/AD/WP)
The Zeta addressable weatherproof call point (ZT-CP2/AD/WP) is used to manually initiate an alarm on a Zeta addressable fire alarm system.
As the unit is weatherproof (IP rating 65), it is suitable for external use, or areas which may have a high build up of moisture.
The unit has a back box that can be oriented to have either 2 cable entries, or a single central cable entry at either the top or the bottom of the unit for the addressable loop wiring.
Features Addressable manual call point
Weatherproof (IP rating 65)
Complies fully to EN54 part 11
Available in red and white
Model ZT-CP2/AD/WP ZT-CP2/AD/WP/W
Part No. 43-360 43-362
Element Type Resettable
Alarm Indication Yellow Flag & Red LED
Operating Voltage 17 - 33V DC
Quiescent Current 1mA
Alarm Current 2.9mA
Operating Temperature -20ºC to 50°C
Maximum Humidity 95% RH Non Condensing
IP Rating IP65
Size (Width x Height x Depth) 87 x 87 x 70mm
Weight 276g
24
Addressable Fire Alarm Systems /
Zeta AddressableExplosion Proof Break Glass Unit (ZTA-BGU/WP)
This explosion proof addressable break glass unit is manufactured from aluminium in order to withstand harsh environments. It has a built in push button activator to signal an alarm activation.
The address of the unit is set via an internal address module. Valid addresses are 1 to 126. The unit will return an analogue value of 16 for normal conditions and a value of 64 during an alarm condition.
The unit is finished in red anti-corrosive epoxy powder coating, with 2 x 20mm cable entries. The unit is supplied with a hammer for operation.
Model ZTA-BGU/WP
Part No. 43-410
Element Type Glass
Alarm Activation Break Glass With Hammer
Type of Protection Flame proof
Area Classification Zone 1 & 2
Gas Groups Group I, II A, II B
Apparatus Standard IS – 2148 / 81
CMRI Certification Number CMRS / TC / H167
Approvals CCE
Material Aluminium LM6
Finish Anti corrosive epoxy powder coated
Cable Entry 2 x ¾” ET
Gasket Neoprene
Hardware Stainless steel (SS-304)
Contact Element INC
Rating Voltage 500 V, 50Hz AC
Terminals 4 x 2.5mm²
Earthing External: 2 Nos – M6 Internal: No – M5
Operating Voltage 17-33V DC
Quiescent Current 1.5 mA
Alarm Current 3 mA
Operating Temperature -20°C to 50°C
Maximum Humidity 95% RH Non Condensing
IP Rating IP 65
Size (Width x Height x Depth) 105 x 215 x 115mm
Weight 1.5 kg
BR
EA K G LASS
IN
CASE OF
F I R E
N P
T L
115
105
100
Hammer185215
Chain
TL - Terminals 4Nos. 2.5Sq.mm.NP - Name & Warning Plate (SS)
Cable Entry
25
Addressable Fire Alarm Systems /
Zeta Addressable Securetone 2 Sounder (ZAS2/R, ZAS2/W)
The Securetone 2 addressable sounder has a low profile design which makes it ideal for locations where sounders are required to be unobtrusive. It is designed to work with the complete range of Zeta addressable control panels.
The sounder is supplied configured to it’s maximum volume. However there is a potentiometer which may be used to adjust the sound level if required.
An 8 way DIL switch is used to set the address, where switch 8 is the shadow operative switch. When in the position ON, the sounder will behave normally. When in the OFF position, the sounder will listen to commands without answering to the panel. This allows multiple sounders to be configured at the same address to allow for synchronised sounder operation.
Features Complies fully to EN-54 part 3
85 dB @ 1 metre
Low current consumption
Loop isolation option
Compatible with all Zeta addressable panels
DIP switch address setting
Option to function as shadow sounder
Model ZAS2/R ZAS2/W
Part No. 42-520 42-521
Sound Output 85 dB @ 1 metre
Alarm ToneIntermittent Tone - 800-970Hz (0.5s each) Pulsed Tone – 970Hz (0.5s on, 0.5s off)
Maximum Sounders Per Loop 64
Short Circuit Isolator No
Operating Voltage 17-30V DC
Quiescent Current 0.9 mA
Alarm Current 5.5 mA
Maximum Cable Size 2.5mm²
Operating Temperature 0ºC to 40ºC
Maximum Humidity 95% RH Non Condensing
IP Protection Rating IP43
Material Red ABS Plastic White ABS Plastic
Size, Diameter x Height 100mm x 37.5mm
Weight 120g
ZAS2/R
ZAS2/W
26
Addressable Fire Alarm Systems /
Zeta Addressable Securetone 2 Combined Sounder & Flasher (ZAS2/RFI, ZAS2/WFI)
The Zeta addressable Securetone 2 combined sounder & flasher has a low profile design which makes it ideal for locations where sounders are required to be unobtrusive.
It is designed to work with the complete range of Zeta addressable control panels. It also includes a short circuit isolator which minimises the number of devices which would be inoperative in the case of a short circuit on the loop.
The sounder is supplied configured to it’s maximum volume. However there is a potentiometer which may be used to adjust the sound level if required.
An 8 way DIL switch is used to set the address, where switch 8 is the shadow operative switch. When in the position ON, the sounder will behave normally. When in the OFF position, the sounder will listen to commands without answering to the panel. This allows multiple sounders to be configured at the same address to allow for synchronised sounder operation.
Features Complies fully to EN-54 part 3
85 dB @ 1 metre
Includes short circuit isolator
Low current consumption
Loop isolation option
Compatible with all Zeta addressable panels
DIP switch address setting
Shadow sounder option
Model ZAS2/RFI ZAS2/WFI
Part No. 42-525 42-526
Sound Output 85 dB @ 1 metre
Alarm ToneIntermittent Tone - 800-970Hz (0.5s each) Pulsed Tone – 970Hz (0.5s on, 0.5s off)
Maximum Sounders Per Loop 64
Short Circuit Isolator Yes
Operating Voltage 17-30V DC
Quiescent Current 0.9 mA
Alarm Current 5.5 mA
Maximum Cable Size 2.5mm ²
Operating Temperature 0ºC to 40ºC
Maximum Humidity 95% RH Non Condensing
IP Protection Rating IP43
Material Red ABS Plastic White ABS Plastic
Size, Diameter x Height 100mm x 37.5mm
Weight 120g
ZAS2/RFI
ZAS2/WFI
27
Addressable Fire Alarm Systems /
Zeta Addressable Securetone 2 Addressable Flasher (ZASF/RI)
The Zeta addressable Securetone 2 flasher has a low profile design which makes it ideal for locations where flashers are required to be unobtrusive.
It is designed to work with the complete range of Zeta addressable control panels.
It also includes a short circuit isolator which minimises the number of devices which would be inoperative in the case of a short circuit on the loop.
Features Complies fully to EN-54 part 3
Includes short circuit isolator
Low current consumption
Loop isolation option
Compatible with all Zeta addressable panels
DIP switch address setting
Model ZASF/RI
Part No. 42-530
Maximum Flashers Per Loop 64
Short Circuit Isolator Yes
Operating Voltage 17-30V DC
Quiescent Current 0.9 mA
Alarm Current 2.5 mA
Maximum Cable Size 2.5mm²
Operating Temperature 0ºC to 40ºC
Maximum Humidity 95% RH Non Condensing
IP Protection Rating IP43
Material Red ABS Plastic
Size, Diameter x Height 100mm x 37.5mm
Weight 120g
28
Addressable Fire Alarm Systems /
Maxitone Addressable Sounder & Sounder Flasher (ZAMT/R, ZAMT/W, ZAMTF/R)
The Maxitone addressable sounder is a large horn sounder suitable for many applications. It can be used on any panel using the Zeta Addressable Protocol. It is available as a sounder only in red or white, or as a combined sounder flasher in transparent red. It is suitable for indoor & outdoor useIt has a large back-box with knockout cable entries, which has plenty of room for fitting the cables.
It has an internal 8 way dip switch for setting the device address, and a sound output of 94 dBA @ 1m.
Both units have a built in short circuit isolator to provide system integrity in the event of cable damage.
120mm
126mm
107mm
Model ZAMT/R ZAMT/W ZAMTF/R
Part No. 42-007 42-007A 42-
Colour Red White Red
Supply Voltage 17-33V
Standby Current 0.6mA 0.6mA 0.6mA
Active Current 12mA 12mA 15mA
Sound Output 94dB 94dB 94dB
Number of Tones 2 (Controlled by FACP)
Flasher N/A N/A Red LED – 2Hz
Operating Temp. 0°C to 50°C
Max. Humidity 95% RH N/C
IP Rating IP 65
Size 124 x 129 x 100 mm
Weight 200g
29
Addressable Fire Alarm Systems /
Zeta Common Addressable Input Unit (ZIU)
The Zeta addressable input unit (ZIU) is used to interface external equipment which has a volt free normally open relay output to any Zeta addressable fire alarm system. The input is monitored with a 47K end of line resistor.
The unit has a built in loop short circuit isolator to help keep the unit operational in the event of a problem on the addressable loop wiring.
The unit has internal LED indications for loop isolator active, fault on input and alarm (panel controlled). During the system set-up, the led can be removed from this box to allow these LEDs to be viewed.
Model ZIU
Part No. 48-100
Operating Voltage 17 – 33V DC
Quiescent Current 900uA
Alarm Current 2.9mA
Fault Current 2.8mA
Isolating Current 7.3mA
Input End Of Line 47K Resistor
Device Normal Resistance (Return Value 16) 10K to 75K
Device Open CCT Fault Resistance (Return Value 4) 85K to open circuit
Device Alarm Resistance (Return Value 64) 0K to 5K
Operating Temperature 0ºC to 50ºC
Maximum Humidity 95% RH Non Condensing
IP Rating IP 43
Size, Width x Height x Depth 127 x 88 x 57mm
Weight 220g
0 1 23
45678
90 1 23
45678
90 1 23
45678
9
Interface Unit
Address
Seri
al N
o
Hundreds
ZIU Pt No: 48-100ZIOU Pt No: 48-105ZSCC Pt No: 48-110
Loop
In
- - + + -
Out
Tens Units
30
Addressable Fire Alarm Systems /
Zeta Addressable Input Output Units (ZIOU, ZIOU/230)
The Zeta addressable input output units (ZIOU & ZIOU/230) are used to interface external equipment to any Zeta addressable fire alarm system.
It has a switch monitoring input with a 47K end of line resistor and a volt free SELV relay output.
There are two versions available, one for switching low voltage (ZIOU) and the other for switching mains (ZIOU/230).
As with all addressable interfaces, the outputs are controlled by the panel to which they are connected. Consequently the interfaces will behave differently on different panels, i.e. some may allow the outputs to be programmed whilst others will have a default “pre-programmed” operation.
Model ZIOU ZIOU/230
Part No. 48-105 48-106
Operating Voltage 17 – 33V DC
Quiescent Current 900uA
Alarm Current 10.6mA
Fault Current 2.8mA
Isolating Current 7.3mA
Input End Of Line 47K
Device Normal Resistance (Return Value 16) 10K to 75K
Device Open CCT Fault Resistance (Return Value 4) 85K to open circuit
Device Alarm Resistance (Return Value 64) 0K to 5K
Relay Rating 1 Amp SELV Only
5 Amp 230V AC Resistive
Operating Temperature 0ºC to 50ºC
Maximum Humidity 95% RH Non Condensing
IP Rating IP43
Size, Width x Height x Depth 127 x 88 x 59mm
Weight 220g
Seri
al N
o
0 1 23
45678
9 0 1 23
45678
9 0 1 23
45678
9
Address Settings
Compatible with Zeta AddressableFire Alarm System
Panels Only
Interface UnitZIOUH PT NO.40-06
www.gltexports.com MADE IN THE UK
AUX 1240VAC 5A
Hundreds Tens UnitsNC
Power
Loop
LinkIsolateSection
IN- + +- -
OUT
147k EOLMON I/P
Alarm
Fault
Isolator
CM
NO
The unit has a built in loop short circuit isolator to help keep the unit operational in the event of a problem on the addressable loop wiring.
It has 3 indication LEDs on the front of the unit. One for alarm, one for local fault and one for addressable loop fault (isolator active).
31
Addressable Fire Alarm Systems /
Zeta Addressable Sounder Circuit Controller (ZSCC, ZSCC/4)
The Zeta addressable sounder circuit controllers (ZSCC & ZSCC/4) are used to connect any conventional alarm warning devices (for instance sounders, flashers or bells) to any Zeta addressable fire alarm system. It needs external power to be supplied from a suitable 24V power supply.
The unit has a built in loop short circuit isolator to help keep the unit operational in the event of a problem on the loop wiring.
It has 3 indication LEDs on the front of the unit, one for alarm, one for local fault and one for addressable loop fault (isolator active).
Model ZSCC ZSCC/4
Part No. 48-110 48-111
Number of Sounder Circuits 1 4
Operating Voltage 17 – 33V DC
Quiescent Current 900uA (6.8 mA from ext PSU)
Alarm Current10.6mA (10mA + sounder load from PSU)
42.4mA (10mA per circuit + sounder load from PSU)
Fault Current 2.8mA (10mA from PSU)
Isolating Current 7.3mA (6.8 mA from ext PSU)
Sounder End of Line 47K
Line Monitoring Conditions Open & Short Circuit
Sounder Output 1 Amp (If Ext PSU Allows)
Operating Temperature 0°C to 50°C
Maximum Humidity 95% RH Non Condensing
IP Rating IP 43
Size 127 x 88 x 59mm 195 x 143 x 79mm
Weight 220g 400g
0 1 23
45678
9 0 1 23
45678
9 0 1 23
45678
9
Address
Hundreds
Snd Supply
Tens Units
ZIU Pt No: 48-100ZIOU Pt No: 48-105ZSCC Pt No: 48-110
Seri
al N
o
Interface Unit
0 1 23
45678
9 0 1 23
45678
9 0 1 23
45678
9
Address
Hundreds Snd Supply
Loop In/OutLineIsolated
Tens Units
Serial No
Quad Sounder Unit
Snd 1 O/P
SndActive
SndFault
SndActive
SndFault
Snd 2 O/P Snd 3 O/P
SndActive
SndFault
Snd 4 O/P
SndActive
SndFault
ZSCC
ZSCC/4
32
Addressable Fire Alarm Systems /
Zeta Addressable Zone Monitoring Units(ZTZM/1, ZTZM/4)
Zone monitors are used to connect conventional detectors to an addressable loop. This may be for economic reasons (due to conventional detectors being less expensive compared with addressable ones), or for technical reasons (the required detector may not be available in an addressable form (for instance flame detectors).
The Zeta addressable zone monitoring units have either 1 (ZTZM) or 4 (ZTZM/4) detection circuits and both require external power to be supplied from a suitable 24V PSU.
The unit has a built in loop short circuit isolator to help maintain operation in the event of a problem on the addressable loop wiring. It has internal indication LEDs for zone alarm (red) and zone fault (yellow) for each of the detector circuits. It also has one for addressable loop fault (isolator active).
Model ZTZM/1 ZTZM/4
Operating Voltage 17 – 33V DC
Quiescent Current 1.08mA (22mA from ext PSU)
1.08mA (40mA from ext PSU)
Alarm Current (Max.)
1.09mA (37mA from ext PSU)
1.09mA (105mA from ext PSU)
Fault Current (Max.)
1.09mA (55mA from ext PSU)
1.09mA (175mA from ext PSU)
Isolating Current 7.2mA (22mA from ext PSU)
7.2mA (50mA from ext PSU)
Sounder End Of Line 2K2
Line Monitored Conditions Open & Short Circuit & Alarm
Alarm Condition Zone current >14mA
Operating Temperature 0°C to 50°C
Maximum Humidity 95% RH Non Condensing
IP Rating IP43
Size 127 x 88 x 59 mm
Weight 220g
Serial No
0 1 23
45678
9 0 1 23
45678
9 0 1 23
45678
9
Address
HundredsZone Supply
Loop In/OutLineIsolated
Tens Units
Quad SounderMonitoring Unit Zone
1
ZoneAlarm
ZoneFault
Serial No
0 1 23
45678
9 0 1 23
45678
9 0 1 23
45678
9
Address
HundredsZone Supply
Loop In/OutLineIsolated
Tens Units
Quad SounderMonitoring Unit Zone
1
ZoneAlarm
ZoneFault
Zone2
ZoneAlarm
ZoneFault
Zone3
ZoneAlarm
ZoneFault
Zone4
ZoneAlarm
ZoneFault
33
Addressable Fire Alarm Systems /
Zeta GSM Communicator (GSM-COM)
Zeta GSM communicator is an interface that allows a fire alarm panel to send a SMS text message in the event of an alarm or a fault.
The communicator accepts a standard Mobile Phone SIM card, and is then programmed with the alarm information & phone numbers via a PC.
The unit can run on any power supply between 9 & 24V DC.
The unit has 4 inputs & 2 user definable outputs.
The outputs can be manually operated by dialling the GSM communicator then entering a password.
Model GSM-COM
Part No. 48-900
Supply Voltage 9-24V DC
Standby Current 200mA
Active Current 500mA
Transmission Frequency GSM 900/1800 MHz
Inputs (Type) 4 x N/O switch monitor
Input Quantity (3 user definable, 1 reserved)
Outputs (Type) 4 x Open Collector – 100mA Max
Output Quantity (2 user definable, 2 reserved for line faults)
Operating Temperature 0°C to 60°C
Size (PCB Only) 150 x 101 x 27mm
Weight (PCB Only) 70g
Size (ex antenna) 234 x 165 x 80mm
Weight 200g
A Antenna
B Metal House
C Antenna Cable Adaptor
D Main PCB
E Antenna Connection
F SIM card Case
G GSM Module
H Power Supply Terminals 9-24V DC
I RS232 Connector for Programming
9-24V DC
PC Rs232
A
B
C
ED
F G
H J
I
K
J Connectors
• GSM LINE• PSTN LINE• In1/2/3 (User
Programmable)• In4 (DIRECT GSM
Function)• COM Common
Point IN1...IN4• OUT1/2 (User
Programmable)• OUT3 failure of
GSM line• OUT4 failure of
wired line
K Push button
34
Addressable Fire Alarm Systems /
Loop Powered Door Magnet (ZTA-DH)
The loop powered door magnet is the latest innovation from Zeta Alarm Systems. The ZTA-DH is an addressable loop powered & loop controlled door holder. It takes all it’s power from the loop, so there is no need for a separate power supply or battery.
The unit consists of a controller unit, which connects directly to the loop, and a permanent magnet door holder. The door holder controller can then be programmed to operate in a similar manner to an Input/Output unit.
The current consumption allows the use of up to 20 units per loop.
It has a manual door release button to allow the magnet to release the door at any time.
The interface also has a built in loop short circuit isolator, to help maintain system integrity in the event of a fault condition.
Model ZTA-DH
Part No. 83-005
Supply Voltage 17-33V DC
Standby Current 1mA Typ (Max 13.5mA)
Active Current 4mA Typ (Max 16.6mA)
Inputs Manual door release button
Output Release signal to magnet
Operating Temp. 0°C to 60°C
Holding Force 200 N
Magnet Release Pwr 3 W
Size (interface) 127 x 88 x 59 mm
Weight (interface) 220g
Size (magnet) 85 x 110 x 38 mm
Weight (magnet) 400g
Size (keeper) 55 x 55 x 50 mm
Weight (keeper) 150g
Loop OutLoop In
4 Cores
35
Addressable Fire Alarm Systems /
Future ProductsA showcase of forthcoming products in development:
EN54 Switched-Mode Power Supplies
Complies with the latest requirements of EN54 part 4
1.0 Amp output up to 12.0 Ah
5.0 Amp output up to 17.0 Ah
Quatro 4 Loop Addressable Fire Alarm Panel
Network capacity of 64 panels (254 loops)
Build-in European languages
Cutting edge cause & effect software
4 x 40 character display
Xtratone Sounder and Combined Sounder & Flasher
High dB output sounder
Low current consumption
36
Detector Sounder Module Plug and play sounder which fits onto Fyreye Common Bases
Easily retrofitted to current installations
Up to 125 sounder modules can be supported on a single loop
EN54 Certified Interface Modules
Fully compliant & certified to EN54
Built-in isolators
Fyreye MKII Detectors Built-in short circuit isolators
8 LEDs offering combination of flashing modes
Introducing new protocol (backwards compatible)
Special portable tool to check sensitivity via built-in IR sensor
37
Product Compatibility Chart
Repeater Panels Addressable Detectors Addressable Sounder Addressable Interface Detector Bases Remote Led
REP-
AD
REP-
AL
REP-
AL/G
Alar
m M
anag
er
FEAO
E200
0
FEAH
E200
0
FEAH
HE2
000
FEAO
H20
00
ZT-C
P2/A
D
WP-
MCP
/AD
ZT-5
0RA
ZT-1
00RA
ZAS2
/R(W
)
ZAS2
/R(W
)FI
ZASF
/RI
ZAM
T/R
ZAM
TF/R
ZIU
ZIO
U
ZIO
U/2
30
ZSCC
ZSCC
/4
ZTZM
ZTZM
/4
ZTA-
DH
FE-C
B
FEA-
IB
FEA-
RB
ZTA-
CSB
ZTA-
CSFI
B
ZTA-
LE2
ZTA-
LE2-
10
ZTA-
LE3
Simplicity Micro x x x x P
Max Per loop: - - - - - - - - - - - - 32 32 32 16 10 32 16 8 16 4 32 32 8 - - - 64 48 - - -
Simplicity 64 x x x P
Max Per Loop: - - - - - - - - - - - - 64 48 64 32 25 64 16 8 16 8 32 32 16 - - - 64 48 - - -
Simplicity 126 x x x P
Max Per Loop: - - - - - - - - - - - - 64 48 64 32 25 64 16 8 16 8 32 32 16 - - - 64 48 - - -
Premier AD x x x P
Max Per Loop: - - - - - - - - - - - - 64 48 64 32 25 64 16 8 16 8 32 32 16 - - - 64 48 - - -
Premier AL 1-4 x P
Max Per Loop: - - - - - - - - - - - - 64 48 64 32 25 64 16 8 16 8 32 32 16 - - - 64 48 - - -
Premier AL 5-8 x x P
Max Per Loop: - - - - - - - - - - - - 64 48 64 32 25 64 16 8 16 8 32 32 16 - - - 64 48 - - -
About
This chart is aimed to assist identifying which devices or repeaters will work with each control panel.
If you have any questions or doubts, contact your local representative, or contact our technical support team via email on technical@gltexports.com.
Key
Compatible, and can be connected directly to the panel
x Not compatible with the panel
P Compatible, but requires some extra setup programming
38
Device Current Consumption (in Micro-Amps)
Cable ComparisonType Voltage drop (mV/A/m)
FDC 1.0 44
FDC 1.5 29
FDC 2.5 18
Voltage Drop ConsiderationsOn an addressable system, loop voltage drop has to be taken into consideration. Due to variations in load distribution along the cable length, it is not always practical to try to calculate the exact voltage drop.
The addressable devices are rated down to 17V, so every point on the loop must be at least 17V at all times.
So when considering the question “how long can my loop be ?”, the actual question to be answered is “how long can my loop be with my maximum alarm load, and chosen cable thickness, before the loop voltage drops below 17 V DC?”. There is always the option to use a thicker cable gauge.
The below tables give a rough indication of “worst case voltage drop” for different loads and cable lengths for the 3 main fireproof cable sizes.
Cable Length (1.0mm cable)
Load 100m 250m 500m 750m 1000m 1250m 1500m 1750m 2000m
100mA 26.56 25.9 24.8 23.7 22.6 21.5 20.4 19.3 18.2
200mA 26.12 24.8 22.6 20.4 18.2 16 13.8 11.6 9.4
300mA 25.68 23.7 20.4 17.1 13.8 10.5 7.2 3.9 0.6
400mA 25.24 22.6 18.2 13.8 9.4 5 0.6 N/A N/A
500mA 24.8 21.5 16 10.5 5 N/A N/A N/A N/A
Cable Length (1.5mm cable)
Load 100m 250m 500m 750m 1000m 1250m 1500m 1750m 2000m
100mA 26.71 26.28 25.55 24.83 24.1 23.38 22.65 21.93 21.2
200mA 26.42 25.55 24.1 22.65 21.2 19.75 18.3 16.85 15.4
300mA 26.13 24.83 22.65 20.48 18.3 16.13 13.95 11.78 9.6
400mA 25.84 24.1 21.2 18.3 15.4 12.5 9.6 6.7 3.8
500mA 25.55 23.38 19.75 16.13 12.5 8.88 5.25 1.63 N/A
Cable Length (2.5mm cable)
Load 100m 250m 500m 750m 1000m 1250m 1500m 1750m 2000m
100mA 26.82 26.55 26.1 25.65 25.2 24.75 24.3 23.85 23.4
200mA 26.64 26.1 25.2 24.3 23.4 22.5 21.6 20.7 19.8
300mA 26.46 25.65 24.3 22.95 21.6 20.25 18.9 17.55 16.2
400mA 26.28 25.2 23.4 21.6 19.8 18 16.2 14.4 12.6
500mA 26.1 24.75 22.5 20.25 18 15.75 13.5 11.25 9
Device Quiescent Alarm
FEAOE2000 480 2300
FEAHE2000 440 2400
FEAHHE2000 440 2400
FEAOH2000 520 2300
ZT-CP2/AD 1500 18000
WP-MCP/AD 1000 2900
ZT-50RA 5000 9000
ZT-100RA 5000 9000
ZAS2/R(W) 900 4000
ZAS2/R(W)FI 900 5500
ZASF/RI 900 2500
ZAMT/R 600 12000
ZAMTF/R 600 16000
ZIU 900 2900
ZIOU 900 10600
ZSCC 900 10600
ZSCC/4 900 42400
ZTZM 800 780
ZTZM/4 800 780
FE-CB 0 0
FEA-IB 43 6400
FEA-RB 0 15000
ZTA-CSB 400 4000
ZTA-CSFIB 700 5500
ZTA-LE2 1500 10000
ZTA-LE2-10 1500 10000
ZTA-LE3 0 10000
39
Notes
40
41
42
Tel: +44 (0) 1792 455 175 Fax: +44 (0) 1792 455 176 E-mail: info@zetaalarmsystems.com Web: www.zetaalarmsystems.com
Detection House 72-78 Morfa Road Swansea SA1 2EN United Kingdom
Available now from:
Recommended