Addison Fabricators, Inc.-inc... · 2019-02-11 · Addison Fabricators, Inc. P.O. Box 330 Addison,...

1/7

We manufacture ASME Code pressure vessels, tanks, and lumber treating

equipment. We have Quick Opening Hinged Closures of various

sizes in stock or we can custom fabricate to meet your needs.

Addison Fabricators, Inc. P.O. Box 330 Addison, AL 35540 Phone: 256 -747-1546 Fax: 256-747-1130

Quick Opening Hinged Closures Page #1, Swing Cylinder Page #2,

Bridge Rails Page #3 & #4, Overhead Counterweight Door Page #5,

Hydraulic Controls Page #6, and Completed Cylinders Page #7.

Addison Fabricators , Inc .

2/7

Swing Cylinders

Addison Fabricators, Inc. P.O. Box 330 Addison, AL 35540 Phone: 256 -747-1546 Fax: 256-747-1130

3/7

Bridge Rails

Addison Fabricators, Inc. P.O. Box 330 Addison, AL 35540 Phone: 256 -747-1546 Fax: 256-747-1130

4/7

Addison Fabricators, Inc. P.O. Box 330 Addison, AL 35540 Phone: 256 -747-1546 Fax: 256-747-1130

Bridge Rails

5/7

Addison Fabricators, Inc. P.O. Box 330 Addison, AL 35540 Phone: 256 -747-1546 Fax: 256-747-1130

Overhead Counterweight Door

6/7

Remote control assembly

for locking ring, swing

cylinder, and bridge rails.

Allows the operator to

control all the functions of

the treatment cylinder from

25 feet or more away, as is

necessary under the new

EPA regulations.

Addison Fabricators, Inc. P.O. Box 330 Addison, AL 35540 Phone: 256 -747-1546 Fax: 256-747-1130

Hydraulic Controls

7/7

Addison Fabricators, Inc. P.O. Box 330 Addison, AL 35540 Phone: 256 -747-1546 Fax: 256-747-1130 Addison Fabricators, Inc. P.O. Box 330 Addison, AL 35540 Phone: 256 -747-1546 Fax: 256-747-1130

We can custom fabricate new treatment cylinders to meet your specific needs. We also

have the “R” Code stamp which allows us to work on and repair existing vessels

both in our shop and in the field.

Completed Cylinders

To request a quote

please contact:

Coleman Smith, CEO

csmith@addisonfab.com

Jud Pheny, President

jpheny@addisonfab.com

or 256-747-1546.