View
275
Download
9
Category
Preview:
Citation preview
7/27/2019 ACTIX Practice
1/25
Content
1. Actix introduction2. Cell file import bin selection3. Log file import4. Super Stream5. 3G Parameter6. Plotting parameters on Map window
1. RSCP2. Ec/Io3. PSC4. Pilot Pollution5. UE Tx Power6. Throughput
7. Plotting parameters on Sheet8. Getting stats in chart format9. Exporting Tab10. Events
7/27/2019 ACTIX Practice
2/25
Select Analyzer Classic
7/27/2019 ACTIX Practice
3/25
Cell File Format
Cell file Heading
Heading formatforSite information
Heading formatforCell information
Site Id
Site Name with prefix U_
Lat. and long. information
Site Name
WCDMA Cell Site Name Should be equal toWCDMA SITE Site Name Cell Name without prefix U_ andend with Sector
Azimuth
Beam Width
PSC
7/27/2019 ACTIX Practice
4/25
Cell file heading - ; #NetworkData datafile
Site Id. - Actual Site Id.
Site Name - Actual Site Name should start with U_
Site heading format - Should be WCDMA_SITE
CELL heading format - Should be WCDMA_CELL
CELL Name - Actual Cell name with out start with U_
WCDMA Cell Site Name Should be equal to WCDMA SITE Site Name
** Cell should be in .txt format only
Important Notes for preparing CEL FILE
7/27/2019 ACTIX Practice
5/25
Importing CEL FILE : Select cell file through Tools Preferences Cell refs
7/27/2019 ACTIX Practice
6/25
Binning: Select Tools Preferences Binning ( Change Binning interval as required)
7/27/2019 ACTIX Practice
7/25
Log file loading :Right Click on Loaded Data Files Open log files (Select necessary logs)
7/27/2019 ACTIX Practice
8/25
Super Stream (Merging Log files) Select Tools Create Super streamStream
7/27/2019 ACTIX Practice
9/25
Super Stream (Merging Log files) Select MS from all log files and Give Name as requiredExample: Here MS1 is selected from all log files and Name given as Kelampakkam MS1
7/27/2019 ACTIX Practice
10/25
Super Stream Created
7/27/2019 ACTIX Practice
11/25
Display Map : Select View Display New Map
7/27/2019 ACTIX Practice
12/25
Map Unit change: Right Click on Map window Map Units Select required option
7/27/2019 ACTIX Practice
13/25
Importing Vector / Tab files: Select Layer Control icon Add Tab files Ok
7/27/2019 ACTIX Practice
14/25
UMTS RF Parameters: Expand Down link measurements Select Require Parameter.
RSCP, Ec/Io, RSSI, PSC, and UE Tx. Power
7/27/2019 ACTIX Practice
15/25
UMTS RF Parameters: Plot Right Click on Uu_Active Set_RSCP_0 Display on Map
7/27/2019 ACTIX Practice
16/25
UMTS RF Parameters: Legend Change Right click on parameter Modify ranges
Select Range
Add ,Remove andEdit range
Set Color
7/27/2019 ACTIX Practice
17/25
UMTS RF Parameters: Samples Right Click on Uu_Active Set_RSCP_0 Display on table(if you need separate Excel sheet Click on Display On workbook)
7/27/2019 ACTIX Practice
18/25
UMTS RF Parameters: Chart Right Click on Uu_Active Set_RSCP_0 Display on Chart
7/27/2019 ACTIX Practice
19/25
UMTS RF Parameters: Pilot Pollution Expand Event data Coverage Uu_Pilot Pollution
7/27/2019 ACTIX Practice
20/25
UMTS RF Parameters: Throughput Expand 3G UMTS RLC
7/27/2019 ACTIX Practice
21/25
UMTS Events: 3G UMTS Event Data
7/27/2019 ACTIX Practice
22/25
Call Statistics : Select particular super stream file Right Click UMTS call statistics
7/27/2019 ACTIX Practice
23/25
Call Statistics :
7/27/2019 ACTIX Practice
24/25
Export Tab: Goto Map Layer Export to Tab Select Parameter and location
7/27/2019 ACTIX Practice
25/25
Thank You
Recommended