View
1
Download
0
Category
Preview:
Citation preview
1
www.CRE-Marine.com Tel: + 44 01224 872 445 Fax: + 44 01224 873 710
Email: sales@CRE-Marine.com
‘CS-MS' Electrical ConnectorSubsea / Underwater / Marine
The most common applications:
ROV•Dive Bell Connectors•Underwater Cameras and Lights•Diver communications•Recreational submersables•
Key Feature:
Multi size shell body •Up to 9 contacts•Pressure up to 5,900 Psi (Mated)•Open face pressure up to 5,900 Psi•Up to 500 VDC•Up to 20 amps-single pin see page 10•
•
Revision 2020-01
1
INTERNAL MANUFACTURE CARDTYPE: PART No: DATE REQUIRED: QTY:No. OF WAYS: 26ALLOCATION:ITEM No: QTY. DESCRIPTION REMARKS / MATERIALPART NoNOTE 1NOTE 2NOTE 3 PLEASE ENSURE INTERNAL SURFACE INDICATED IS SHOTBLASTED AND THAT ALL INTERNAL SURFACES ARE CLEAR OF GRIT BEFORE COMMENCING WITH ASSEMBLY NOTES ETC.PLEASE ENSURE 'O' RINGS ARE FITTED BEFORE LOCATING ASSEMBLED INSERT AND BACKPOTTINGPLEASE ENSURE ALL CONTACTS ARE SHOTBLASTED BEFORE ASSEMBLY INTO INSERT ASSEMBLY:1000V I/R:CONTINUITY MATING CHECK:NUMBERED QTY. FAILED:QTY. PASSED:QTY. PASSED:QTY. FAILED:QTY. FAILED:QTY. PASSED:QTY. FAILED:QTY. PASSED:QTY. FAILED:QTY. PASSED: TECH SIGNATURE:TECH SIGNATURE:TECH SIGNATURE:TECH SIGNATURE:TECH SIGNATURE: DATEDATEDATEDATEDATEVISUALINSPECTION IMC No:DOC DATE: JUNE. 2014 REV: 312345678910111213
CS-MS A J 09 BCR
BCR-BULKHEAD CONNECTOR RECEPTACLESCP-SEALING CAP PLUGNUMBER OF CONTACTSSHELL SIZE (J)A - ALUMINIUM S - STAINLESSCS-MS CONNECTOR SERIES
NUMBER OF CONTACTS
CS-MS A J 09 CCP
CCP-CABLE CONNECTOR RECEPTACLESCR-SEALING CAP RECEPTACLE
SHELL SIZE (J)A -ALUMINIUM S - STAINLESSCS-MS CONNECTOR SERIES
2
Standard Mechanical Specification:
NOTES:
Contact CRE for special order materials.
Options: Pressure balanced Oil Filled (PBOF)• Field Installable• Mixed contact sizes for power/data requirement• Bespoke design/configuration to suit customer requirements at no extra cost•
Testing:
Pressure testing up to 5,900 Psi• Durability testing with 250 mate and re-mate cycles• Open face pressure testing up to 5,900 Psi•
Notes:For more information’s contact CRE.
Part Numbering System - Bulkhead Example
Part Numbering System-Connector Example
www.CRE-Marine.com Tel: + 44 01224 872 445 Fax: + 44 01224 873 710
Email: sales@CRE-Marine.com
Revision 2020-01
COMPONENT MATERIALShell Body Aluminium 6061-T6 Hard AnodisedContact Insert Epoxy ResinElectrical Contacts Leaded Nickel Copper C97 or K41Plating Details 1um Acid Gold over 2.5um Nickel Copper FlashRetaining Nut Aluminium 6061-T6 Hard Anodised'O' Rings Nitrile NI70Backing Washer Black Acetal
H MIN. SPOTFACE
A A/F
D
B
E
C
F
G
3
Reference Dimensions 'MSAJ' Connector
All dimension in mm
Thread to suitBulkhead
Bulkhead Connector Receptacle (BCR)
www.CRE-marine.com Tel: + 44 01224 872 445
Fax: + 44 01224 873 710 Email: sales@CRE-marine.com
NOTE: For recommended Torque figures please refer to page 10
Revision 2020-01
0.8
A B C D E F G-'O'Ring H19 26 10 24 17 9/16-18 UNF 5-254 25
A
E
F
D
B H
A
C
E
D
B
(typ.
)
A
C
E D
A
E
C
F
D
H F
E
A
D
C
H
4
Reference Dimensions 'MSAJ' Connector
All dimension in mm
Backshell Cable Connector Receptacle-Straight (CCP)
www.CRE-marine.com Tel: + 44 01224 872 445
Fax: + 44 01224 873 710 Email: sales@CRE-marine.com
G
G - (typ.)
Revision 2020-01
NOTE: Customer should check that your custom wiring detail is suitable for the chosen Interface bore sizes shown.
A B C D E F G-'O'Ring BORE H45 22.5 7 22 12.95 11.38 BS013 9
CCP-PBOF ADAPTORA B C D E F G-'O'RING BORE H90 22 20 15.75 10.5 N/A BS013 895 22 20 15.75 10.5 N/A BS013 8
65.5 22 20 15.75 10.5 53 BS013 865.5 22 20 17 13 53 BS013 9
A
B
C
A
B
C
5
Reference Dimensions 'MSAJ' Connector
All dimension in mm
Bulkhead Blanking Plug (SCP)
www.CRE-marine.com Tel: + 44 01224 872 445
Fax: + 44 01224 873 710 Email: sales@CRE-marine.com
Cable Connector Blanking Plug (SCR)
Revision 2020-01
A B G-'O'Ring17.15 22 BS013
A B C25.4 22 19
B
A C
A
C
B
D
6
Reference Dimensions 'MSAJ' Connector
All dimension in mm
CS-MS-CCP Overmould-Straight
www.CRE-marine.com Tel: + 44 01224 872 445
Fax: + 44 01224 873 710 Email: sales@CRE-marine.com
CS-MS-CCP Overmould-90 Deg.
Note: Overmould dimensions are indicative, please contact sales@cre-marine.com if you have specific mould dimension requirements
Revision 2020-01
A B C90 22 BS013
A B C D55 22 60 BS013
CCP
BCR
SCP
IM1054
IM1055
IM1056IM1324
Assembled Dimensions 'MSAJ' Connector
All dimension in mm 7Note: Step files for design purposes available from engineering@CRE-marine.com
www.CRE-marine.com Tel: + 44 01224 872 445
Fax: + 44 01224 873 710 Email: sales@CRE-marine.com
Revision 2020-01
SCP CCP IM1054 IM1055 IM1056 IM1324BCR-01 34 52 97 102 72.5 72.5
BCR CCP - OVERMOULD - STRAIGHT
CCP - OVERMOULD - 90 Deg.
Assembled Dimensions 'MSAJ' Connector
All dimension in mm 8Note: Step files for design purposes available from engineering@CRE-marine.com
www.CRE-marine.com Tel: + 44 01224 872 445
Fax: + 44 01224 873 710 Email: sales@CRE-marine.com
Revision 2020-01
CCP - STR. CCP - 90Deg. BCR-01 104 73
NOTES:
Current rating maybe impacted by cable selection•Different pin configurations contact CRE•Standard cable gauge for 3 way - 18 AWG ; 5,9 way - 22 AWG• Single pin rate: up to18Amp / Voltage: up to1000v• Multi pin rate contacts - Please contact engineering@CRE-marine.com•
9All dimension in mm
Socket Face View
5 WAY400 VDC
3 WAY 500 VDC
2
1
35
65
1
9 WAY 300 VDC
34
728
9
3 WAY 500 VDC
5
5 WAY400 VDC
2 3
1
Pin Face View
1.56 Pin 1.0 Pin
1
734
8
9 WAY 300 VDC
65
29
24
1
3
4
3
2
1
www.CRE-Marine.com Tel: + 44 01224 872 445 Fax: + 44 01224 873 710
Email: sales@CRE-Marine.com
For current carrying capacity and wire recommendations see page 10
Revision 2020-01
10All dimension in mm Revision 2020-01
Recommended