A Transverse Profile Imager for SwissFEL Rasmus Ischebeck

A Transverse Profile Imager for SwissFELRasmus Ischebeck

Rasmus Ischebeck

A Transverse Profile Imager for SwissFEL

> Profile measurement in FELs

> Imaging scintillating crystals

> Applications

2

Rasmus Ischebeck

Transverse Profile Monitors

3University of Illinois

Rasmus Ischebeck

Profile Measurement in FELs

4

Rasmus Ischebeck

Coherent OTR

5Joe Frisch

Rasmus Ischebeck

Coherent OTR

6Joe Frisch

Rasmus Ischebeck

1-Dimensional Profile Monitor

8Gian Luca Orlandi, Prajwal Mohanmurthy

Rasmus Ischebeck

x-y Correlations> Intrinsic correlation

> Explicit x-y dependency introduced by RF deflector

9

Rasmus Ischebeck

A Transverse Profile Imager for SwissFEL

> Profile measurement in FELs

> Imaging scintillating crystals

> Applications

10

Rasmus Ischebeck

2-Dimensional Profile Monitors> Optical transition radiation (OTR)

> Scintillation

11

Rasmus Ischebeck

Imaging Scintillators

12

Electron Beam Profile MonitorsScintillators, OTR Screens & Wire Scanners

13Rasmus Ischebeck – Scintillators for SwissFEL

Installed scintillators

•Ce:YAG•5 µm•20 µm•200 µm

•Ce:LuAG•200 µm

Electron Beam Profile MonitorsVisual Light Optics• OTR screen / scintillator is at an angle of 45º to the

optical axis• For overview camera (1:5.3 demagnification)

• Use Scheimpflug criterion to correct image plane orientation

• For 1:1 imaging• Perspective control lens is not available commercially• Only central part (~1…2 mm) of the screen can be

imaged within depth of field

14Rasmus Ischebeck – Scintillators for SwissFEL

Rasmus Ischebeck

Design Considerations> Scheimpflug imaging principle

> Snell’s law of refraction

15

Observation of the Scheimpflug imaging principleallows to image the entire screen without depth-of-field issues.To avoid astigmatism, the lens is not tilted, butthe detector is tilted. For a 1:1 imaging, we tiltthe CMOS sensor by 15º.

The YAG / LuAG scintillators are observed at suchan angle that Snell’s law of refraction is observed.As a consequence, we can image beams that aresmaller than the thickness of the scintillator.

Rasmus Ischebeck

Imaging Scintillating Crystals

16

Rasmus Ischebeck

Imaging Scintillating Crystals

17

Rasmus Ischebeck

Imaging Scintillating Crystals

18

Rasmus Ischebeck

Imaging Scintillating Crystals

19

Rasmus Ischebeck

Trigonometry…

20

Rasmus Ischebeck

Observed Beam Size

21

Rasmus Ischebeck

Ideal Observation Angle

22

Rasmus Ischebeck

Measurement Principle> Combination of two monitors:

> Scintillating crystal> Optical transition radiation

23

Rasmus Ischebeck

Implementation

26

to camera

(coherent)OTR

Rasmus Ischebeck

Screen Monitor

27

Rasmus Ischebeck

A Transverse Profile Imager for SwissFEL

> Profile measurement in FELs

> Imaging scintillating crystals

> Applications

28

Rasmus Ischebeck

Quadrupole Scan

29

Rasmus Ischebeck

Beam Transmitted Through Slit

30

Rasmus Ischebeck

Slice Emittance Measurements> Slice emittance measurement of a 1.3 pC beam

31

Measurement performed by

Eduard Prat & Marta Divall

200 µm

Rasmus Ischebeck

Slice Emittance Measurement

32Eduard Prat

Rasmus Ischebeck

Slice Emittance Measurements> Core slice emittance as a function of charge

33

Measurements performed by

Eduard Prat & Marta Divall

Rasmus Ischebeck

A Transverse Profile Imager for SwissFEL> A transverse profile imager that considers

> Snell’s law of refraction in the scintillating crystal> The Scheimpflug imaging condition

> Prototype installed at the SwissFEL Injector Test Facility> Resolution measured with this prototype: σ ≲ 10 µm, ε ≲ 30 nm> Sensitivity: Q ≲ 1 pC

Next Plans> Prove immunity to coherent OTR> Start series production

34

Rasmus Ischebeck

Thank You to…> Hansueli for the technical design> The AMI team for manufacturing the components> Markus for the assembly> Markus, Albert & the vacuum group for installation> Eduard the emittance measurement software, and for using the new profile

monitor extensively for emittance measurements> Gian Luca, Marta, Simona, Carlo, Thomas & Eduard for the measurements

presented in this talk> Vincent for help with optical design> Andrea for support with patenting the design, and with connections to industry> Helge for camera server software, and Babak for synchronized data acquisition> The entire Commissioning and Operations crew

35

Rasmus Ischebeck