500 SERIES - Myers Mixers

8376 Salt Lake Ave. Cudahy, CA, 90201 myersmixers.com

T: 323.560.4723 F: 323.771.7789 sales@myersmixers.com MYERS MIXERS

Myers Mixers offers a complete line of tank mounted slow-speed

agitators for low to medium viscosity products.

Myers offers a wide variety of tank sizes and configurations, and a

wide choice of drives and impellers for its agitators. The

possibilities include but are not limited to:

• Jacketed tank with a gate blade impeller equipped with

scrapers. Used with hot melt products, this configuration can

also be used where cooling is required.

• Two open bow-tie impellers (on a single shaft) for higher

viscosity products.

• Two single paddles with scrapers on bottom blade, with

horizontal baffles running between paddles.

• Concentric shaft with sweeps on sides and bottom, operating

on outside shaft. Two three-prong axial pumper blades on

inside shaft.

• Gate blades on walls and on truncated bottom.

• Battery of hydraulically-driven agitators with roof-mounted

power unit.

• Slow speed agitator for slurry holding tank.

500 SERIES AGITATORS