View
218
Download
0
Category
Tags:
Preview:
Citation preview
4.4 Modeling and Optimization
Buffalo Bill’s Ranch, North Platte, NebraskaGreg Kelly, Hanford High School, Richland, WashingtonPhoto by Vickie Kelly, 1999
Optimization• Applying Calculus and its methods for finding
minimums and maximums in real life situations such as
What is the largest area I can enclose with a given amount of fence?
What is the least amount of material needed to build a cylinder of given volume?
What dimensions will maximize the volume of a rectangular prism with given surface area?
Basic Steps to Solve Optimization Problems
1. Read the problem
2. Draw a picture to help you visualize the situation
3. Write 1 equation for each variable. (You should have the same number of equations as variables)
4. Take the equation with the number so you can solve for one of the variables
5. Substitute the variable you found into one of the other equations
6. Take the derivative and set the equation equal to 0
Basic Steps to Solve Optimization Problems
Basic Steps to Solve Optimization Problems
7. Take the second derivative to check your answer (if it’s <0 max, >0 min)
8. Solve for the other variables needed to answer the question
A Classic Problem
You have 40 feet of fence to enclose a rectangular garden along the side of a barn. What is the maximum area that you can enclose?
x x
40 2x
40 2A x x
240 2A x x
40 4A x
0 40 4x
4 40x
10x 40 2l x
w x 10 ftw
20 ftl
There must be a local maximum here, since the endpoints are minimums. (and the function is a downward parabola)
A Classic Problem
You have 40 feet of fence to enclose a rectangular garden along the side of a barn. What is the maximum area that you can enclose?
x x
40 2x
40 2A x x
240 2A x x
40 4A x
0 40 4x
4 40x
10x
10 40 2 10A
10 20A
2200 ftA40 2l x
w x 10 ftw
20 ftl
General procedures for finding solutions to optimizationproblems:
1 Draw a picture and appropriately label theimportant parts.
2. Write an equation (function) for the quantity you want to optimize in terms of one variable.
3 Find and test all critical numbers. (answers areusually fairly obvious.)
What is the largest open top box I can make by cutting
equal squares from each corner of a 6x6 sheet of metal & turning up the sides?
V(x) = x(6 - 2x)(6 - 2x) = 36x – 24x2 + 4x3
V’(x) = 36 – 48x + 12x2
12x2 – 48x + 36 = 0
x2 – 4x + 3 = 0
(x – 3)(x – 1) = 0
x = 3 or x = 1
V(1) = 16 cubic units
V(x) = x(6 - 2x)(6 - 2x)
V(1) = (1)(6 - 2)(6 - 2)
Example 5: What dimensions for a one liter cylindrical can will use the least amount of material?
We can minimize the material by minimizing the surface area.
22 2A r rh area ofends
lateralarea
We need another equation that relates r and h:
2V r h
31 L 1000 cm21000 r h
2
1000h
r
22
10 02
02A r r
r
2 20002A r
r
2
20004A r
r
Example 5: What dimensions for a one liter cylindrical can will use the least amount of material?
22 2A r rh area ofends
lateralarea
2V r h
31 L 1000 cm21000 r h
2
1000h
r
22
10 02
02A r r
r
2 20002A r
r
2
20004A r
r
2
20000 4 r
r
2
20004 r
r
32000 4 r
3500r
3500
r
5.42 cmr
2
1000
5.42h
10.83 cmh
If the end points could be the maximum or minimum, you have to check. (This is rare)
To summarize:
Write a function for the amount that you want to optimize.
If you are not sure that the extreme you’ve found is a maximum or a minimum, you have to check.
p
If the function that you want to optimize has more than one variable, use substitution to rewrite the function.
Recommended