View
218
Download
2
Category
Preview:
Citation preview
Table of Contents3MTM Electrical Tapes .............................................................. 4
3MTM Cold Shrink Indoor and Outdoor QT III Terminations ........ 6
3MTM Sheath Seal Kits ............................................................. 7
3MTM Rejacketing Kit ............................................................... 7
3MTM Cold Shrink Termination QT III 69kV/72,5kV .................... 8
3MTM JobBoxTM Custom Kitting ................................................. 8
3MTM Armoured Cable Splices TS Series .................................. 9
3MTM Cold Shrink QS III Splices .............................................. 10
3MTM Motor Lead Splice Kits ................................................. 11
3MTM Cold Shrink Mine and Portable Cable Splicing Kits ....... 12
3MTM ScotchcastTM Mine and Portable Cable Splicing Kits ...... 13
3MTM Mining Tape Splice Kits 3100 Series ............................... 14
3MTM Scotchcast™ Flexible Power Cable Splicing Kits 82F Series ...................................................................... 15
3MTM Scotchcast™ Mine and Portable Cable Jacket Repair Kits M Series .................................................. 16
3MTM Flame Retardant Heat Shrink ITCSF and IMCSF ............. 17
3MTM Corrosion Protection Tapes ............................................ 17
3MTM Corrosion Protection Kits CPT Series ............................. 18
3MTM Cold Shrink End Caps EC Series ..................................... 18
3MTM Cable Preparation .......................................................... 19
3MTM Portable Labellers .......................................................... 20
3MTM Novec™ Aerosol Cleaners ............................................. 21
3MTM Novec™ Fire Suppression 1230 .................................... 21
3MTM TTSTM Self Regulating Heating Cable ............................... 22
3MTM Aluminum Conductor Composite Reinforced (ACCR) ...... 23
3MTM Flexible Paper and Laminate Insulation ......................... 23
SUBSTATION
MAINTENANCE/WAREHOUSE
l10
l7
l1 l8 l11
3MTM Motor Lead Kits 5300 Series
3MTM Cold Shrink Cable Splicing Kits 8040/2230 Series
3MTM ScotchcastTM Cable Splicing Kits 8096 Series
3MTM TS Series Splicing Kits
l1 l2 l3 l4
l9
l7
You work in a demanding environment. To be successful, you need a supplier with a solid understanding of your industry and the
technology that drives it. Quite simply, you need 3M. Our 3M Electrical Markets Division is dedicated to helping you get the job done better,
faster and safer – at the mine, mill, smelter or refinery. Our broad portfolio of solutions, backed by comprehensive technical support, is
available to you from coast to coast to coast.
Keep the Power Flowing with 3M Electrical Solutions
TRANSFORMER
SMELTING/REFINING
MOBILE SUBSTATION
MOBILE EQUIPMENT
l3
l4
l6
l5
l1 l8 l11
l10 l7
l2
l7
l8
3MTM TS Series Splicing Kits
3MTM ScotchastTM Jacket Repair Kits M Series
3MTM Heavy Duty Mining Tape & Splice Kits
3MTM ScotchlokTM Terminals and Connectors
3MTM Portable Labellers
3MTM Cold Shrink Outdoor Terminations QT-III
3MTM Cold Shrink Indoor Terminations QT-III
3MTM NovecTM Aerosol Cleaners
l5 l6 l7 l8 l9 l10 l11
l10 l7
For some 60 years, 3M has been the world’s leading supplier of electrical tapes. The broad 3M line includes vinyl tapes of many kinds, our stretchier and stickier all-weather tape, Scotch® Super 33+™ Vinyl Electrical Tape, Scotch® Color-Coding Tapes 35 and cold-weather Scotch® Vinyl Electrical Tape Super 88.
Durable 3M™ Electrical Tapes have excellent resistance to abrasion, moisture, UV rays and many caustic substances. They are compatible with solid dielectric cable insulation. And because they’re designed with the electrician in mind, they’re easy to apply properly in a wide range of temperatures, indoors and out.
Scotch® and 3MTM Electrical Tapes
Ordering InformationProduct Name Product Description Tape Thickness Temp Range Roll Size
Scotch® Super 33+™ Premium Vinyl Electrical Tape
Highly conformable in all weather applications; resists UV rays, abrasion, corrosion, alkalies & acids. Flame retardant UL listed. CSA certified
7 mil -18°C / 105°C3/4” x 66’ (19 mm x 20,1 m) 3/4” x 44’ (19 mm x 13,4 m) 3/4” x 20’ (19 mm x 6,0 m)
Scotch® Premium Vinyl Electrical Tape Super 88
All weather, heavy duty, abrasion resistant, fast build up; flame retardant UL listed, CSA certified.
8.5 mil -18°C / 105°C3/4'' x 66' (19 mm x 20,1 m) 3/4'' x 44' (19 mm x 13,4 m)
Scotch® Premium Vinyl Electrical Tape Color Coding Tape 35
9 fade-resistant colors, excellent insulating properties. Resists UV rays, abrasion, corrosion, alkalies & acid.
7 mil 0°C / 105°C3/4'' x 60' (19 mm x 18,2 m) 1/2'' x 20' (12 mm x 6,1 m)
3M™ Temflex™ Vinyl Electrical Tape
Economical, general purpose tape UL listed. CSA certified.
7 mil -10°C / 80°C 3/4" x 60' (19 mm x 18,2 m)
3M™ Temflex™ Vinyl Electrical Tape 1700P
General purpose tape UL listed.CSA certified. Printed for use in MSHA - approved Splicing Kits
7 mil -10°C / 80°C3/4" x 66'’ (19 mm x 20,1 m) 1 1/2" x 44'’ (38 mm x 13,4 m) 1 1/2" x 66'’ (38 mm x 20,1 m)
Scotch® Semi-conducting Electrical Tape 13
Rubber tape, semi-conductive. Compatible with cable semi-conducting jackets.
30 milcontinuous: 90°C /194°F short term: 130°C / 266°F
3/4" x 15'’ (19 mm x 4,5 m) 1 1/2 x 66' (38 mm x 20,1 m)
Scotch® Shielding Electrical Tape 24
All metal open-weave shielding braid, conformable, temperature stable.
— —1" x 15' (25 mm x 4,5 m) 1" x 100' (25 mm x 30,4 m)
Scotch® Electrical Grounding Braid 25
All-metal woven braid; high current-carrying capacity of 6 AWG wire; solderable.
— — 1/2" x 15' (12 mm x 4,57 m)
Scotch ® Glass Cloth Electrical Tape 27 and 69
Woven insulating glass cloth; high-temperature resistance; high mechanical strength.
27 is 7 mil 69 is 7.5 mil
27 is Class B temp (130°C / 266°F) 69 is class H temp (180°C / 356°F)
1/2" x 66' (12 mm x 20,1 m) 3/4" x 66' (19 mm x 20,1 m)
Scotch® Linerless Rubber Splicing Tape 130C
High voltage insulating; thermally conductive; self-bonding. 30 mil continuous: 90°C / 194°F
short-term: 130°C / 266°F
1" x 30' (25 mm x 9,1 m) 3/4" x 30' (19 mm x 9,1 m) 1 1/2" x 30' (38 mm x 9,1 m) 2" x 30' (50 mm x 9,1 m)
4
Electrical Solutions
Ordering InformationProduct Name Product Description Tape Thickness Temp Range Roll Size
3M™ Temflex™ Rubber Splicing Tape 2155
Economical linered low voltage rubber insulating tape; self-fusing, UL rated. 30 mil 80°C
176°F3/4" x 22' (19 mm x 6,7 m) 1 1/2" x 22' (38 mm x 6,7 m)
Scotch® Rubber Mastic Tape 2228
Self fusing rubber backing bonded to a moisture-sealing mastic; all weather. 65 mil
90°C / 194°F emergency overload of 130°C / 266°F
2" x 3' (50 mm x 0,9 m) 1"x10’ (25 mm x 3,0 m)
3M™ Scotch-Seal™ Mastic Tape Compound 2229
Conformable and durable mastic. Excellent moisture & environmental seal. 125 mil 80°C
176°F 3 3/4" x 10' (95 mm x 3,0 m)
3M™ Scotchfil™ Electrical Insulation Putty Black, self-fusing, insulating putty. 125 mil
80°C 176°F
1 1/2" x 60" (38 mm x 1,52 m)
3M™ Temflex™ Cotton Friction Tape 1755
High-grade friction tape. Good abrasion resistance.
15 mil80°C 176°F
3/4" x 60' (19 mm x 18,28 m)
Scotch® Vinyl Mastic 2200 and 2210/ScotchMoisture Sealant 06147 and 06149
Excellent moisture sealant; tough vinyl backing; all weather.
2200 is 125 mil2210 is 90 mil6147 is 45 mil6149 is 45 mil
80°C 176°F
6 1/2" x 4 1/2" (165 mm x 144 m)3 1/4" x 4 1/2" (82 mm x 144 m)4" x 10' (101 mm x 3,04 m)2 1/2" x 10' (63 mm x 3,04 m)2 1/2" x 2 1/2" (63 mm x 63 m)
Scotch® Self-Fusing Silicone Rubber Electrical Tape 70
Arc & track resistant; self-fusing, long lasting silicone rubber.
12 mil180°C 356°F
1" x 30' (25 mm x 9,14 m)
Scotch® Heavy Duty Triangular Self-fusing Silicone Rubber Electrical Tape 70HDT
Arc & track resistant; self-fusing, long lasting silicone rubber, triangular tapered edge profile and a blue guideline.
20 mil center, 8 mil edge
180°C356°F 1" x 30' (25 mm x 9,14 m)
Scotch® Fire and Electric Arc Proof Tape 77W
Used on high-energy cables that are within 18" (close proximity) of other cables or valuable assets. Easily visible, easy inspection.
30 mil —1-1/2" x 20' (38 mm x 6,1 m) 3" x 20' (76 mm x 6,1 m)
Scotch® Varnished Cambric Tape 2510 and 2520
Yellow, varnish coated cotton cloth 2510: no adhesive; 2520: adhesive. Insulate bus bars, motor leads (for re-entry), service drop connections.
2510 is 7 mil 2520 is 8 mil
105°C220°F
3/4" x 60' (19 mm x 18,3 m) 3/4" x 36 yd (19 mm x 33 m) 1" x 36 yd (25 mm x 33 m) 1-1/2" x 36 yd (38 mm x 33 m)2" x 36 yd (51 mm x 33 m) 36" x 25 yd (914,4 mm x 22,9 m) 2510 only
Scotch® Heavy Duty Mining Tape 31
Tough, abrasion-resistant backed and flexible tape for jacket repair on mining cables. MSHA-approved.
60 mil 105°C221°F
2" x 6' (51 mm x 1,8 m) 2" x 8,5' (51 mm x 2,6 m) 2" x 10' (51 mm x 3,05 m)
Scotch® Barricade Tape 300 Series
Durable polyethylene plastic, bold 2" letters, long roll lenght, will not tear easily, attracts attention. Barricade applicable in both large and small areas. Available in various sizes, thicknesses and with different warning messages.
2 mil 3 mil 4 mil
N/A3" x 300' (76 mm x 91,4 m) 3" x 1000' (76 mm x 304,8 m)
Scotch® Detectable Bured Barricade Tapes 400 Series
Designed for accurately locating and helping prevent damage to underground utility installations. Aluminum backing.
5 mil N/A3" x 1000' (76 mm x 304,8 m) 6" x 1000' (152 mm x 304,8 m)
5
HEAT
3MTM Cold Shrink Terminations QT-III offer easy installation and reliable performance when terminating indoor and outdoor medium voltage shielded cable. The unique step-core design combined with the built in Hi-K stress control and silicone sealing compounds means simpler installation on all types of cable. The QT-III termination provides long-term reliability through an improved silicone rubber body with enhanced hydrophobic recovery, UV stability and track and erosion resistance. Plus its Hi-K stress control design delivers excellent BIL performance and lower surface stress resulting in a more compact termination. Through superior engineering, 3MTM Cold Shrink Terminations QT-III deliver maximum performance.
AGENCIESMeets requirements of IEEE Standard 48-1996.
3MTM Cold Shrink Indoor & Outdoor Terminations QT-III
3M™ Cold Shrink Outdoor Termination QT-III
3M Product Number
BIL Cable Insulation O.D. Range
Conductor Size Range AWG and kcmil (mm2)
3M™ Cold Shrink Indoor Tubular Termination QT-III
in. (mm) 5 kV 8.7 kV 15 kV 25/28 kV 35 kV
7620-T-95 95 kV 0.32-0.59 (8,2-15,0) 8 - 4 8 - 6
7621-T-95 95 kV 0.44-0.89 (11,2-22,7) 2-3/0 4-2/0
7622-T-95 95 kV 0.64-1.08 (16,3-27,4) 4/0-400 3/0-300
7624-T-95 95 kV 0.83-1.53 (21,1-38,9) 500-750 350-700
7625-T-95 95 kV 1.05-1.80 (26,7-45,7) 700-1500 600-1250
7622-T-110 110 kV 0.64-1.08 (16,3-27,4) 4/0-400 3/0-300 2-4/0 (35-120)
7624-T-110 110 kV 0.83-1.53 (21,1-38,9) 500-750 350-700 4/0-500 (120-240)
7625-T-110 110 kV 1.05-1.80 (26,7-45,7) 700-1500 600-1250 500-1000 (240-500)
7626-T-110 110 kV 1.53-2.32 (38,9-58,9) 1750-2000 1500-2000 1250-2000 (500-1000)
7693-T-150 150 kV 0.72-1.29 (18,3-32,8) 300-500 250-500 2/0-300 (70-150) 2-4/0 (35-120) 2-2/0 (35-70)
7695-T-150 150 kV 1.05-1.80 (26,7-45,7) 700-1500 600-1250 500-1000 (240-500) 250-800 (150-400) 3/0-600 (95-325)
7696-T-150 150 kV 1.53-2.32 (38,9-58,9) 1750-2000 1500-2000 1250-2000 (500-1000) 900-1750 (500-800) 700-1500 (400-725)
3M™ Cold Shrink Outdoor Skirted Termination QT-III
7620-S-2 95 kV 0.32-0.59 (8,2-15,0) 8 - 4 8 - 6
7621-S-2 95 kV 0.44-0.89 (11,2-22,7) 2-3/0 4-2/0
7622-S-2 110 kV 0.64-1.08 (16,3-27,4) 4/0-400 3/0-300 2-4/0 (35-120)
7692-S-4 150 kV 0.64-1.08 (16,3-27,4) 4/0-400 3/0-300 2-4/0 (35-120) 2-1/0 (35-50)
7693-S-4 150 kV 0.72-1.29 18,3-32,8) 300-500 250-500 2/0-300 (70-150) 2-4/0 (35-120)
7694-S-4 150 kV 0.83-1.53 (21,1-38,9) 500-750 350-700 4/0-500 (120-240) 2/0-250 (70-150)
7695-S-4 150 kV 1.05-1.80 (26,7-45,7) 700-1500 600-1250 500-1000 (240-500) 250-800 (125-400)
7696-S-4 150 kV 1.53-2.32 (38,9-58,9) 1750-2000 1500-2000 1250-2000 (625-1000) 900-1750 (500-800)
7683-S-8 200 kV 0.72-1.29 18,3-32,8) 300-500 250-500 2/0-300 (70-150) 2-4/0 (35-120) 2-2/0 (35-70)
7684-S-8 200 kV 0.83-1.53 (21,1-38,9) 500-750 350-700 4/0-500 (120-240) 2/0-250 (70-150) 2-4/0 (35-120)
7685-S-8 200 kV 1.05-1.80 (26,7-45,7) 700-1500 600-1250 500-1000 (240-500) 250-800 (125-400) 3/0-600 (95-325)
7686-S-8 200 kV 1.53-2.32 (38,9-58,9) 1750-2000 1500-2000 1250-2000 (625-1000) 900-1750 (500-800) 700-1500 (400-725)
6
* Each kit makes 3 terminations; lugs must be purchased separately.
Electrical Solutions
Indoor/ Outdoor Kits
IndoorKits
Cable Metallic ShieldDiameter Range
5 kV 8 kV 15 kV 25/28 kV
RJK-1 RJS-2/3 0.60-0.80 1-3/0 2-2/0 1-2/0
RJK-2 RJS-3/3 0.80-1.02 4/0-400 3/0-30 1/0-4/0 2-1/0
RJK-3 RJS-4/3 1.02-1.28 500-750 400-600 250-450 2/0-250
RJK-4 RJS-5/3 1.28-1.62 800-1000 750-1000 500-750 300-500
7
3MTM Sheath Seal Kits 5831 and 5832
3MTM 3/C Rejacketing Kits
3M™ Sheath Seal Kit
3MTM Sheath Seal Kits 5831 and 5832 are designed to seal the sheath area for multiconductor cables with or without ground wires. They will handle copper or aluminum cables from #2 AWG through 500 kcmil (35-250 mm2). For kit contents and sizing, see chart below. Each kit makes one seal.
Designed to protect the phase legs (core) of 3/C shielded power cable from exposure to moisture, corrosion, ozone, ultra-violet radiation, physical contact and other hazards associated with termination operating environments. Rejacketing sleeves are designed to be used in conjunction with 3MTM Cold Shrink Breakout Boots and 3MTM Silicone Rubber Terminations.
Specifications 5831 5832
Conductor Size 2 - 3/0 AWG(35 - 80 mm2)
4/0 AWG - 500 kcmil(120 - 250 mm2)
Maximum Jacket or Armour O.D. 2.6" (66 mm) 3.75" (95,2 mm)
Kit Components:
Wraparound Mold Body 1 1
3M™ Scotchcast™ 2131 1 1
Abrasive Cloth 1 1
3M™ Scotch® Electrical Tape Super 33+ 1 1
3M™ Scotch® Linerless Rubber Splicing Tape 130C 1 1
3M™ Scotchfil™ Electrical Insulation Putty 1 1
RJK Kits for Converting 3/C Cable to Three 1/C Cables
HEAT
3MTM Cold Shrink Terminations 7672-S-8 Series QT-III are designed for use on 69kV or 72,5kV polymetric power cable. Because they are cold shrink, installers do not need to use a torch, and they are easy to install. The silicone insulator also makes them light weight, so there is no need for a crane. Each kit includes instructions for Jacketed Concentric Neutral (JCN), Tape Shield (TS), Longitudinally Corrugated (LC), Tape over Wire (TOW) and Wire over Tape (WOT) cable constructions. The kits are packaged 1 termination per kit. Lugs must be purchased separately.
AGENCIESIEEE 48 Class 1 for 69kVIEC 60859 for 72,5 kV
3MTM Cold Shrink Termination QT-III 69kV/72,5kV
3MTM JobBoxTM Custom Kits
3M™ Cold Shrink Outdoor Termination QT-III 69kV/72,5kV
Kit Number BIL Cable Insulation O.D. Range
Conductor Size Range AWG and kcmil (mm2)
3M™ Cold Shrink Termination QT-III
inches (mm)
Tape Shield(TS)
Jacketed Concentric Neutral (JCN) or Wire Shield
Longitudinally Corrugated (LC/HSG) **
Tape over Wire or Wire over Tape (TOW) or (WOT)
7672-S-8 0.650 (16.5) 1.94-3.08 (49.3-78.2) 250-1750 (120-850)
250-1750 (120-850) 250-1750 (120-850) 250-1000 (120-500)
76720S-8 (RW) 0.400-0.470 (10.2-11.9)
1.44-2.58 (36.6-65.5) 250-1750 (120-850)
250-2000 (120-1000) 250-1750 (120-850) 250-1000 (120-500)
3M™ Termination Kit Contents
* For standard (non-reduced wall) terminations: Can be used with Jacketed Concentric Neutral (JCN) Cables Cables having a Jacket OD to 3.61" (91.7 mm) maximum.** For Corrugated Armor Cables, please contact 3M Representative for sizing information.The final determining factors governing selection are Primary Insulation O.D. and Jacket O.D.
69kV/72,5kV
8
3M puts it all in the box for you – exactly as spec’d. No more mismatched materials. No more poking through a fistful of small pieces. No more back and forth trips looking for missing parts. Just open the box and you’re ready to go – start to finish. 3M™ JobBox™ solutions are offered for Motor Lead Splices, Industrial Splices, Terminations, Heat Tracing and other custom application. ONE JOB. ONE BOX.
Electrical Solutions
ORDERING INFORMATION
Size AWG kcmli
1C Splice Kit 3C Splice Kit 4C Splice Kit
14-250 TS TS TS
300 TS TS1 TS1
350 TS TS1 TS1
400 TS TS1 TS1
500 TS TS1 TS1
600 TS TS1 TS1
750 TS TS1 TS1
1000 TS TS1 TS1
HEAT
3MTM Armoured Cable Splices
Kit Number Voltage Conductor Size Range AWG and kcmil (mm2)
Kit Number Voltage Conductor Size Range AWG and kcmil (mm2)
3M™ Cold Shrink TS-Kits
TS-5kVU-1C-8-4 5kVU 8-4 TS-5kVU-3C-8-4** 5kVU 8-4
TS-5kVU-1C-3-300 5kVU 3-300 TS-5kVU-3C-3-300** 5kVU 3-300
TS-5kVU-1C-350-1000 5kVU 350-1000 TS-5kVU-3C-350-1000** 5kVU 350-1000
TS-5kV-1C-6-3/0 5kV 6-3/0 – –
TS-5kV-1C-6-3/0 5kV 6-3/0 TS-5kV-3C-2-3/0 5kVU 2-3/0
TS-5kV-1C-4/0-400 5kV 4/0-400 TS-5kV-3C-4/0-500 5kVU 4/0-500
TS-5kV-1C-500-1000 5kV 500-1000 TS-5kV-3C-4/0-500 5kVU 4/0-500
TS-5kV-1C-500-1000 5kV 500-1000 TS-5kV-3C-500-750 5kVU 500-750
TS-5kV-1C-500-1000 5kV 500-1000 – –
TS-15kV-1C-2-4/0 15kV 2-4/0 TS-15kV-3C-2-4/0 15kV 2-4/0
TS-15kV-1C-4/0-500 15kV 4/0-500 TS-15kV-3C-4/0-500 15kV 4/0-500
TS-15kV-1C-500-1000 15kV 500-1000 TS-15kV-3C-350-750 15kV 350-750
TS-15kV-1C-500-1000 15kV 500-1000 – –
TS-25kV-1C-1-250 25kV 1-250 TS-25kV-3C-1-250 25kV 1-250
TS-25kV-1C-250-750 25kV 250-750 TS-25kV-3C-250-750 25kV 250-750
TS-25kV-1C-500-1000 25kV 500-1000 TS-25kV-3C-500-1000 25kV 500-1000
3MTM Splices for 1C, 3C, & 4C, Armored or Non-Armoured Cable TS SeriesThese 3M™ Low Voltage Tape Splicing Kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. The TS series accommodates a full range of cable sizes.
1/C & 3C, 15/25/28 kV Shielded Armoured & Non-Armored Armorcast/Cold Shrink SplicesDesigned for splicing shielded (Tape or Wire Shielded and Unishield™) armoured or non-armored cables 5/8/15/25/28 kV. The completed splices are designed for use in cable tray, as well as weather-exposed and direct burial locations. The TS Series splices use Armorcast and Cold Shrink technology. Connectors not included, order separately. Each kit makes one splice. Splices meet the requirements of IEEE 404.
**“U” unshielded cable
3MTM JobBoxTM Custom Kits
9
3M™ Terminations and Splice Kits
10
3MTM Cold Shrink Silicone Rubber Splices QS-III3M™ Cold Shrink Silicone Rubber Splice QS-III is designed to meet customer demands for easy, safe, reliable installations by virtually eliminating the pushing, pulling or heating required by traditional splices.
AGENCIESMeets most worldwide standards including IEEE 404, CENELEC and European VDE.
3M CatalogueNumber
Primary InsulationO.D. Range
ConductorSize Range
1/C, 15 kV, tape, wire, LC shielded cable, UniShield® cable
5513A 0.64-1.01" (16,3-25,7 mm) 2-4/0 AWG (35-95 mm2)
5513A 0.84-1.38" (21,3-35,1) 4/0 AWG-500 kcmil (95-240 mm2)
5515A 1.04-1.70" (26,4-43,2) 350-750 kcmil (185-325 mm2)
5516A 1.08-1.70" (27,4-43,2) 500-1000 kcmil (240-500 mm2)
1/C, 25/28 kV, tape, wire, LC shielded cable, UniShield® cable
5524A 0.84-1.36" (21,3-34,5 mm) 1 AWG-250 kcmil (50-120 mm2)
5525A 1.07-1.70" (27,2-43,2 mm) 250-750 kcmil (120-325 mm2)
5526A 1.24-2.07" (31,5-52,6) 500-1000 kcmil (240-500 mm2)
1/C, 35 kV, tape, wire, LC shielded cable, UniShield® cable
5535A 1.07-1.70" (27,2-43,2 mm) 1/0 AWG-350 kcmil (60-185 mm2)
5536A 1.24-2.07" (31,5-52,6 mm) 350-1000 kcmil (185-500 mm2)
3M™ Cold Shrink Splice QS-lll
Electrical Solutions
Pigtail Splicing for 1000 V (or less) & 5-8 kV Shielded and Non-Shielded Feeder Cables 3MTM Motor Lead Kits contain everything needed to quickly splice, seal and insulate copper lug connections of motor lead and feeder cables in one convenient kit. No special tools, torch or power source is needed. All splices are easily re-enterable for inspections and motor replacement.
3M™ Motor Lead Pigtail or V-Stub Splice 5380 Series for 5 and 8 kV Shielded and Non-Shielded Cables 3MTM Motor Lead Splicing Kits 5380 Series are a series of kits designed for splicing motor lead cables to incoming feeder cables. These kits are removable and reusable. These kits can accommodate pigtail (stub) connections, 5/8 kV shielded and non-shielded feeders.The splice’s main component, the lug or splice cover, is made from EPDM rubber as a slip-on insulator. Mastic is used for the moisture seal on the pigtail kits. The kits utilize a high dielectric constant (K) stress control termination for the feeder cable’s electrical stress control.These kits are designed to be used with copper compression lugs. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3MTM ScotchlokTM Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used.
HEAT
3MTM Motor Lead Splice Kits
ORDERING INFORMATION
Kit Number Conductor Range
Feeder AWG/kcmil (mm2)
Motor Lead AWG/kcmil (mm2)
Pigtail – 5/8 kv
5316 8-4 (10-16) 10-4 (6-16)
5317 2-1/0 (35-50) 4-1/0 (25-50)
5318 1/0 -250 (70-120) 2 -250 (35-120)
5319 250-500 (150-240) 4/0 -500 (120-240)
SPECIFICATIONS AND ORDERING INFORMATION
Kit Number Conductor Range
Feeder AWG/kcmil (mm2)
Motor Lead AWG/kcmil (mm2)
Pigtail – 5/8 kv
5381 8-4 (7.6-13) 10-4 (6-16)
5382 2-1/0 (11-16.5) 4-1/0 (25-50)
5383 1/0 -250 (13.5-22.4) 2 -250 (35-120)
5384 250-500 (19-28.4) 4/0 -500 (120-240)
ORDERING INFORMATION
Kit Number Conductor Range
Feeder AWG/kcmil (mm2)
Motor Lead AWG/kcmil (mm2)
Pigtail – 1000 V
5300 14-10 (2,5-4) 16-12 (1,5-2,5 )
5301 10-4 (6-16) 12-4 (4-16)
5302 2-1/0 (35-60) 4-1/0 (25-50)
5303 1/0-250 (70-120) 2-250 (35-120)
5304 250-500 (150-240) 4/0-500 (120-240)
ORDERING INFORMATION
Kit Number Conductor Range
Feeder AWG/kcmil (mm2)
Motor Lead AWG/kcmil (mm2)
Pigtail – 5 kV/8 kV
5321 8-4 (10-16) 10-4 (6-16)
5322 2-1/0 (35-50) 4-1/0 (25-50)
5323 1/0 -250 (70-120) 2-250 (35-120)
5324 250-500 (150-240) 4/0-500 (120-240)
SPLICING KITS 5300 TO 5304Voltage Rating: Up to 1000 V. Use with one-hole copper lugs
SPLICING KITS 5316 TO 5319Voltage Rating: Up to 5/8 kV (Non-Shielded) Use with one or two-hole copper lugs
3M™ MOTOR LEAD PIGTAIL OR V-STUB SPLICE 5380Voltage Rating: Up to 5/8 kV (Shielded and Non-Shielded)
SPLICING KITS 5321 TO 5324Voltage Rating: Up to 8 kV (Shielded or Non-shielded) Use with one or two-hole copper lugs
3M™ 5380 Pigtail
11
3M™ Pigtail Splicing
Reusable Motor Boot Termination on Shielded Feeder Cable
Hi-K Stress Control to Grade Lugs
Mastic Environmental Seal
Each kit contains: • Threeseparatelypackagedspliceswithpre-formed,slip-on
rubber boots • Masticsealingstrips
3MTM Cold Shrink Mine and Portable Cable Splicing Kits
HEAT
3M™ Splicing Kit 8043-1
FOR 5 AND 8 KV CABLE, TYPES SHD-GC, MP AND MP-GCThe 8043-1 Kit can be installed without the use of heat or additional tools, and the cable returned to service immediately. 3M™
Cold Shrink Tubes, with the removable core, are designed for quick installation.
Each kit contains:•ColdShrinkjacketingtube• Fillertube• Threesmallerinsulatortubes• OnerolleachofScotch® Electrical
Tapes 13, 130C, 24 • 3MTM TemflexTM Electrical Tape• Twoabrasivecloths(fineandcoarse);• Scotch® Adhesive kit and an illustrated
step-by-step instruction sheetConnectors are ordered separately. If regular power connectors are used, length cannot exceed 2 1/2 inches.
AGENCIESMeets American Bureau of Shipping 93-DL11873-X.
ORDERING INFORMATION
Kit Number Cable TypeConductor RangeAWG (mm2)
Cable O.D. Range Inches (mm)
Voltage Rating
8043-1* SHD-GC 4-2 (22-30) 1.80 (2.40) 5-8 kV
8043-1* MP-GC, MP 3/0-4/0 (95-100) 1.80 (2.40) 5 kV
8043-1* MP-GC, MP 1/0-2/0 (60-70) 1.80 (2.40) 8 kV
2237 A** SO, SJ 12-10 (6) 0.62 (0.95) 600 V
*Order connectors separately. **Connectors included.
3M™ SPLICING KIT 2237AThe kits are designed to splice SO and SJ type portable power cables (commercial grade extension cords) which are typically used in industrial environments. The 2237A kit accommodates 4-conductor 12-10 AWG. The primary application for the kits is splicing damaged portable cable. The kits can be used for cables aboard ships, cargo operations and a variety of industrial applications.
Each kit contains:• ColdShrinktube• Buttconnectors• Rubberphase• Dividermasticstrips• Scotch® Electrical Color-Coding Tape 35• Instructions
3M™ Cold Shrink Splicing Kit 8043-1
12
Electrical SolutionsHEAT
ORDERING INFORMATIONKit Number Cable Type Conductor Range
AWG/kcmil (mm2)Voltage Rating
8096-2 SHD-GC 4-1/0 (22-50) 5 & 8 kV
8096-2 SHD-GC 2 (30-35) 15 kV*
8096-2 MPF-GC & MPF 4-3/0 (22-80) 5 & 8 kV
8096-2 MPF-GC & MPF 2-1/0 (35-50) 15 kV*
8096-4 SHD-GC 4-4/0 (22-100) 5 & 8 kV
8096-4 SHD-GC 2 (30-38) 15 kV*
8096-4 MPF-GC & MPF 4-300 (22-50) 5 & 8 kV
8096-4 MPF-GC & MPF 2-3/0 (35-80) 15 kV*
8096-6 SHD-GC 4/0-500 (100-250) 5 & 8 kV
8096-6 SHD-GC 1/0-500 (60-250) 15 kV*
8096-6 MPF-GC & MPF 250-500 (150-250) 5 & 8 kV
8096-6 MPF-GC & MPF 1/0-500 (60-250) 15 kV*
*Note: Additional splicing material may be needed for 15 kV.
3MTM ScotchcastTM Mine and Portable Cable Splicing Kits for 5,8 and 15 kV Splicing Kits 8096-2, 8096-4 & 8096-6
The 3M™ Scotchcast™ 8096 Series are complete cable splicing kits designed for splicing type SHD-GC three-conductor shielded cables up to 15 kV on draglines, power shovels, drills and type MPF underground power feeder cables and select trailing cables.
Each kits contains: • ColdShrinkInsulationTubes• 3M™ Scotchcast™ Jacketing Compound
2131• Cablecleaningandshieldingmaterialsto
complete a three-conductor cable spliceUsing 3M™ Scotchcast™ Splicing Kits, you obtain durable, permanent, shop-quality splices without vulcanizing.
NON-VULCANIZING Jacket restored by 2131 compound poured from two-part closed mixing pouch for convenient mixing and pouring. Compound is self-curing.
PERMANENT Both electrically and mechanically flexible and moisture-resistant.
PORTABLEMake repairs in the mine or in the shop. Reduce costly cable and equipment down-time. Cables can be energized immediately.
VERSATILE Three different cable splicing kits handle nearly all common cable sizes.
NO END-LIFTINGPolyurethane-based cable repair compound bonds to all modern cable jacket materials-neoprene and nitrite/PVC, even PVC, EPR and Hypalon.
ABRASION-RESISTANTEqual in performance to vulcanizing.
AGENCIESMeets Mine Safety and Health Administration requirements for flame retardancy and carries acceptance number 07-KA060007-MSHA.
WEATHER RESISTANT Designed to maintain physical and electrical properties in temperature extremes.
3M™ Scotchcast™ Splicing Kit 8096-2, 8096-4 & 8096-6
13
Scotch® Heavy Duty Mining Tape 31 Scotch® Heavy Duty Mining Tape 31 is approved by P-07-KA080005-MSHA (Mining Safety & Health Administration) as the outer jacketing of the 3M™ Mining Tape Splicing Kits 3100 Series. The tape is printed with the MSHA logo/approval number. Scotch® Heavy Duty Mining Tape 31 allows for on-site, quick repair of mining cables.
Mining Cable Splice Kit 3100 Size Voltage Rating Cable Range
1 Scotch® Heavy Duty Mining Tape 31 2" x 8.5' 600V - 2kV #6-500 kcmil
1 Scotch® Linerless Rubber Splicing Tape 130C 1-1/2" x 30' 600V - 2kV #6-500 kcmil
1 3M™ Temflex™ Vinyl Electrical Tape 1700P 1-1/2" x 44' 600V - 2kV #6-500 kcmil
1 3M™ Cable Cleaning Preparation Kit CC-2-Dry 600V - 2kV #6-500 kcmil
Mining Cable Splice Kit 3103
2 Scotch® Heavy Duty Mining Tape 31 2" x 8.5' 5 - 15kV #6-500 kcmil
1 3M™ Temflex™ Vinyl Electrical Tape 1700P 1-1/2" x 44' 5 - 15kV #6-500 kcmil
3 3M™ Scotch® Electrical Shielding Tape 24 2" x 10' 5 - 15kV #6-500 kcmil
2 3M™ Scotch® Rubber Mastic Tape 2228 1" x 10' 5 - 15kV #6-500 kcmil
2 3M™ Cable Cleaning Preparation Kit CC-2-Dry 5 - 15kV #6-500 kcmil
3 3M™ Scotch® Electrical Semi-conductive Tape 13 3/4" x 15' 5 - 15kV #6-500 kcmil
3 Scotch® Linerless Rubber Splicing Tape 130C 1-1/2" x 30' 5 - 15kV #6-500 kcmil
3 Scotch® Linerless Rubber Splicing Tape 130C 3/4" x 30' 5 - 15kV #6-500 kcmil
Mining Cable Splice Kit 3104
1 Scotch® Heavy Duty Mining Tape 31 2" x 8.5" 2kV #6-500 kcmil
1 3M™ Temflex™ Vinyl Electrical Tape 1700P 1-1/2" x 44' 2kV #6-500 kcmil
2 3M™ Scotch® Electrical Shielding Tape 24 2" x 10' 2kV #6-500 kcmil
1 3M™ Cable Cleaning Preparation Kit CC-2-Dry 2kV #6-500 kcmil
2 Scotch® Linerless Rubber Splicing Tape 130C 1-1/2" x 30' 2kV #6-500 kcmil
3MTM Mining Tape Splice Kits 3100 Series
14
3M™ Mining Cable Splice Kit 3100
3M™ Mining Cable Splice Kit 3103 3M™ Mining Cable Splice Kit 3104
3M™ Splice Kit Contents
Electrical SolutionsHEAT
82-F1 and 82-F2 Inline Splice Kits 3M™ Scotchcast™ Cable Splicing Kits 82-F1 and 82-F2 are for in-line splices on non-shielded, portable power cables and cords with copper conductors. They are rated up to 5 kV for single conductors and up to 1 kV or 600/2000 V for multiple conductors. The kits are designed to be used with inline compression (crimp) connectors. The 82-F1 and 82-F2 molds are removable.
Each kit contains:•One-pieceremovablemold•Tapeforsealingmoldends• Abrasivecloth• 3M™ Scotchcast™ Compound 2131 in
closed mixing pouch. Each kit makes one splice.
Kit Number
Voltage Rating
Conductor Range AWG (mm2)
Cable O.D. Range Inches (mm)
Number of Conductors
Connection Maximum O.D. Inches (mm)
82-F1 5 kV 6-1/0 (16-50)** 0.25-0.80 (6-20) 1 0.62 connector (18) connector
1 kV (600/2000 V)*
0.25-0.80 (6-20) Multi 0.90 connector bundle (23) connector bundle
82-F2 5 kV 2/0 /0 (70-95)** 0.80-1.20 (20-30) 1 0.82 connector (21) connector
1 kV (600/2000 V)*
0.80-1.20 (20-30) Multi 1.30 connector bundle (33) connector bundle
* Mine portable cable rating. **Base selection on cable O.D. range.
Flexible Power Cable Tap Splice Kit 82-BF13M™ Scotchcast™ Splice Kit 82-BF1 is for tap splices on non-shielded portable power cables and cords with copper conductors rated up to 1 kV. It can be used on single-conductor or multiple-conductor cables using a compression (crimp) “C” tap connector.
AGENCIES82-F and 82-BF splices are recognised by the Mine Safety and Health Administration 07-KA060002-MSHA.
Kit Number
Voltage Rating
Conductor Range
Cable O.D. Range Inches (mm)
Number of Conductors
82-BF1 1 kV Up to 1/0 AWG (50 mm2)*
0.25-0.80 (6-20) 1 or Multi
* Base selection on cable O.D. range: 0.25 - 0.80''
3MTM ScotchcastTM Flexible Power Cable Splicing Kits 82F Series
3M™ Scotchcast™ Inline Splice Kits 82-F1 and 82-F2
3M™ Scotchcast™ Inline Splice Kit 82-BF1
Each kit contains:• One-pieceremovablemold• Tapeforsealingmoldends• Abrasivecloth• 3M™ Scotchcast™ Compound 2131
in closed mixing pouchEach kit makes one splice.
15
Jacket Repair Kits M-20, M-30, & M-403M™ Scotchcast™ M-series kits are designed to make permanent, shop-quality low- and high-voltage cable jacket repair and splices without vulcanizing. The M-series also features a versatile wraparound mold which maintains excellent physical and electrical properties in extreme conditions. In addition to jacket repairing, the kits can be used for repairing damaged insulations and making partial or complete cable splices by using standard Scotch® Splicing Tapes (see page 4) and flame retardant 3M™ Scotchcast™ Compound 2131. Complete instructions are included with each kit.
AGENCIESMeets 07-KA060002-MSHA when used with 3M™ Scotchcast™ Compound 2131.
Each kit contains:• Reusablewraparoundmold•Pouringspoutsandenoughspacerwebtomaketencablejacket
repairs 3M™ Scotchcast™ Compound 2131 can be used as a jacket replacement compound and is purchased separately.
2131 FLAME RETARDANT COMPOUND3M™ Scotchcast™ Compound 2131 is a flame retardant compound designed primarily to replace the cable jacket when splicing or repairing mine and portable cable. The self-contained mixing and pouring bag makes on-site repairs easy and convenient. Plus the unique formulation bonds to all modern cable jackets yet remains flexible. The 3M™ Scotchcast™ Compound 2131 provides excellent multi-purpose moisture sealing and is ideal for plugs and cable crotch seals. Compound 2131 is used in the 3M™ Scotchcast™ 8096 Series, M-series Kits and 82F(BF) Series Kits.
3MTM ScotchcastTM Mine and Portable Cable Jacket Repair Kits M Series
ORDERING INFORMATIONKit Number Cable O.D. Range
Inches (mm)Maximum Repair Length Inches (mm)
M-20 1.6 - 2.5 (41-63) 13 - 15* (330)
M-30 1.85 - 4.0 (47-102) 20 (508)
M-40 1.85 - 6.0 (47-152) 32 (813)
*13" for SHD-GC; 15" for 600/2000 V
COMPOUND 2131 FOR M-20, M-30, M40 JACKET REPAIR KITS
Nominal Recommended Number of C bags per repair Nominal Repair Length
Cable O.D. (in.) (mm) 8 Inches (203 mm)
16 Inches (406 mm)
32 Inches (813 mm)
1.6 (41) 1 2 3
2.0 (51) 1 2 4
2.4 (61) 2 3 5
2.8 (71) 2 4 7
3.2 (81) 3 5 9
3.6 (91) 3 6 11
4.0 (102) 4 7 13
ORDERING INFORMATIONProduct Number
Weight/Volume
2131-217g 7.6 oz (217g)10.7 cu. in (27,2 cu. cm)
2131-612g 21.7 oz (612g)30.5 cu. in (77,5 cu. cm)
3M™ Scotchcast™ Flame-Retardant Compound 2131
REPLACEMENT MATERIALSF-10 Funnels and SW-40 SpacerAvailable as separate items.
16
Electrical Solutions
Flame Retardant ITCSF Cable Sleeves3MTM Heat Shrinkable Cable Sleeves ITCSF, rated to 1 kV, provide reliable performance for electrical splices, connections and terminations, as well as mechanical and environmental protection. ITCSF Thick-Wall Cable Sleeves are made from flame retardant, polyolefin. They are durable and split resistant and provide strain relief and rapid installation. The 48'' sleeves come standard with a factory-applied adhesive/sealant. Sleeves are supplied in black only. P-154-13 MSHA. ABS Certificate. Other cut lengths may be available upon request.
Flame Retardant IMCSF Cable Sleeves3MTM Heat Shrinkable Medium-Wall Cable Sleeves IMCSF are made of flame-retardant polyolefin. Use for 1 kV splices, connections, terminations and rejacketing. They protect against mechanical and environmental dangers providing excellent abrasion, corrosion and chemical resistance. IMCSF sleeves have greater flexibility than the ITCSF, our thicker-walled version. Installation of these fast-shrinking sleeves is easy with little training necessary. The 48'' lengths come standard with a factory-applied adhesive/sealant. Sleeves are supplied in black only. P-154-13 MSHA. ABS Certificate 96NY595-XOther cut lengths may be available upon request.
3MTM Heat Shrink Tubing ITCSF/IMCSF
Product Number Typical Cable Range Expanded/
Recovery I.D.
ITCSF-0400-48 12-6 AWG (4-10 mm2 ) 0.40/0.15” (10,2/3,8 mm)
ITCSF-0800-48 8-1/0 AWG (10-50 mm2 ) 0.80/0.20” (20,3/5,1 mm)
ITCSF-1100-48 2-4/0 AWG (35-95 mm2 ) 1.10/0.37” (27,9/9,4 mm)
ITCSF-1500-48 3/0 AWG-400 kcmil (95-185 mm2 ) 1.50/0.50” (38,1/12,7 mm)
ITCSF-2000-48 250-750 kcmil (150-300 mm2 ) 2.00/0.65” (50,8/16,5 mm)
IMCSF products are available in the same lengths with the same range and inside diameter as ITCSF products
3MTM SCOTCHRAPTM ALL-WEATHER CORROSION PROTECTION TAPE 50 AND 51These 10- and 20-mil tapes are designed to offer all-weather performance and corrosion resistance and have a high-quality adhesive. Apply these tapes over a wide temperature range for resistance to impact, abrasions and punctures. 3MTM ScotchrapTM All-Weather Corrosion Protection Tapes 50 and 51 are used for corrosion protection on pipes, conduits and fittings, etc. UV resistance is excellent. It has a temperature rating of 176°F (80°C). NOTE: 3MTM ScotchrapTM Pipe Primer should be used with all corrosion protection tapes.
3MTM SCOTCHRAPTM PIPE PRIMERA quick-drying, non-sag rubber base primer that is designed to permeate metal surface pits and irregularities, preparing the surface for tape application. Compatible with the special adhesive on 3MTM ScotchrapTM Tapes, it enhances adhesion. To be used with 3MTM ScotchrapTM All-Weather Corrosion Protection Tapes 50 and 51.
Corrosion Protection Tapes
3M™ Scotchrap™ Tape 50 & 51 and Pipe Primer
3M™ Heat Shrink Tubing ITCSF/IMCSF
17
3MTM Cold Shrink Corrosion Protection Kit CPT Series
3MTM Cable Cleaning Products CC-Series
3MTM Cold Shrink End Caps EC Series
The 3M™ CPT Series Cold Shrink Kits are designed to provide a quick and easy method for protecting bulkhead termination connectors.
The 3M™ CPT Series Cold Shrink Kits are designed to provide a quick and easy method for protecting bulkhead termination connectors.
3M Product Number
Cable O.D. Minimum
Cable O.D. Maxi-mum
Maximum Installed Length
CPT-1/2 0.50 in (13 mm) 1.60 in (41 mm) 4.50 in (114 mm)
CPT-3/4 0.66 in (17 mm) 1.90 in (48 mm) 4.80 in (122 mm)
CPT-1 0.66 in (17 mm) 2.20 in (56 mm) 4.80 in (122 mm)
CPT-1-1/4 1.22 in (31 mm) 2.65 in (67 mm) 4.80 in (122 mm)
CPT-1-1/2 1.40 in (36 mm) 3.00 in (76 mm) 5.50 in (140 mm)
CPT-2 1.68 in (43 mm) 3.60 in (91 mm) 6.50 in (165 mm)
CPT-2-1/2 1.97 in (50 mm) 4.30 in (109 mm) 8.50 in (215 mm)
CPT-3 2.60 in (66 mm) 5.40 in (137 mm) 8.50 in (215 mm)
CPT-3-1/2 2.90 in (74 mm) 6.00 in (152 mm) 10.0 in (254 mm)
CPT-4 2.90 in (74 mm) 6.00 in (152 mm) 10.5 in (267 mm)
3M™ Cold Shrink Corrosion Protection Kit CPT Series
3M™ Cold Shrink End Caps EC-Series
Product Number
Product Description
CC-2 Cable Cleaning Preparation Kit; includes 3 pads and non-conductive grit abrasive cloth
CC-3 Cable Cleaning Pads, 3 pads per kit
18
3M™ Cable Preparation Kit CC-2, CC-3
NON-CONDUCTING, EVAPORATES QUICKLYDesigned to be compatible with all solid dielectric cable insulations and will not cause tracking on insulation surfaces. Instructions for cleaning surfaces can be found on the product labels.
Electrical Solutions
3MTM Cable Preparation and Indentification
3MTM Cable Cleaning Products CC-Series
3MTM ScotchcodeTM Wire Marking Products
3M™ Cable Preparation Kit CPK-ANo matter how well a cable splice or termination is designed, it will quickly fail if the cable is not properly prepared before installation. Prepare cables quickly, efficiently, and with consistent precision and reliability using the tools in the 3M™ CPK-A Kit.
ScotchCodeTM Identification Solutions give you dozens of ways to mark your indoor and outdoor assets. This line includes:
•DispenserswithPreprintedAlphanumericorNEMA Coloured Refill Tapes
•PreprintedWireMarkerBooks
•MarkerBooksandDispenserswith Write-On Labels
•DispenserswithWrite-OnTags
•MarkerPenswithQuick-Drying,UVandWater Resistant Ink
3M™ Cable Preparation Kit CPK-A
19
Each tool kit contains:
1542-2CL-1 Insulation Stripper with Wedge Blade
1700SS Semi-con Scorer with Adjustable Blade
SC10 Semi-con Edge Wedge with Sheath
SC12 Semi-con Roller Grip
CC-600 Cable Cutter
CC-2 Cable Cleaning Kits (4)
3M™ ScotchCode™ Identification Systems
3MTM Metal Tape Embosser PLE
3MTM Portable Labeller Cartridges
3MTM Portable Labellers PL150, PL200 and PL300
The 3M™ Portable Labeller Embosser PLE is a tough cast-aluminum labeller for imprinting metal tapes that withstand weather, termperature and corrosion. A cable tie slot is available for cable marking and a front scissor cutoff allows fast and easy label application. The labeler also has a built-in hole punching device that makes hanging and tacking a breeze.
With electrical equipment, it's essential to properly identify and label wires and components. 3M™ Identification Systems provides these critical products to panel makers, original equipment manufacturers and industrial sector suppliers.
In particular, 3M™ Portable Labellers can help you by printing on a wide range of label materials, including vinyl, polyester, nylon and heat shrink. All units feature exclusive one-touch ‘Hot Keys’ that provide shortcuts for common formatting tasks. The most recent addition to our Wire ID family is the PL150 model with a QWERTY keyboard.
3M™ Metal Tape Embosser PLE
3M™ Portable Labellers PL150, PL200 and PL300
3M™ Portable Labeller Refill Cartridges
3M™ Portable Labeller PL300
20
AVAILABLE REFILL OPTIONS•Vinyltape(variouscolours)
•Polyestertape
•FlexibleNylontape
•Heatshrinktubing
Electrical Solutions
Phone immersed in Novec™ 1230
21
3MTM NovecTM Aerosol Cleaners
3MTM NovecTM 1230 Fire Protection FluidADVANCED CLEAN AGENT FIRE PROTECTION FOR YOUR MOST VALUABLE ASSETS
THE NEXT GENERATION OF HALON REPLACEMENT TECHNOLOGYBased on a proprietary chemistry from 3M, Novec 1230 fluid addresses industry needs for clean agent fire protection that is safe and effective, while offering an environmental profile that other halocarbon agents like HFCs can’t begin to match:
Zero ozone depletion potential
5-day atmospheric lifetime
Global warming potential of 1
In addition, Novec™ 1230 Fire Protection Fluid is non-conductive and leaves no residue. It will not short out your electrical equipment and there is no clean up required.
www.3m.com/novec
3M™ Novec™ Aerosol Cleaners
3M™ Novec™ 1230 Fire Protection Fluid
3M™ Novec™ Aerosol Cleaners are a revolutionary line of nonflammable spray cleaning solvents that combine effective cleaning performance with a wide margin of workplace safety and a favorable environmental profile.separately.
FEATURES AND BENEFITSFast drying, leaves no residue
Nonflammable; Low toxicity
Non-corrosive
Non-ozone depleting
No HCFCs, HFCs, nPB, or HAPs
Over 95% active solvent, for more cleans per canIEC 608
TTSTM for Pipe Freeze and Roof and Gutter Application
PIPE FREEZE
Product Number Description
TTS-5-1-OJ 5 W/FT @ 120V (500/1000 foot spools)
TTS-8-1-OJ 8 W/FT @ 120V (500/1000 foot spools)
TTS-10-1-OJ 10 W/FT @ 120V (500/1000 foot spools)
TTS-5-2-OJ 5 W/FT @ 240V (500/1000 foot spools)
TTS-8-2-OJ 8 W/FT @ 240V (500/1000 foot spools)
TTS-10-2-OJ 10 W/FT @ 240V (500/1000 foot spools)
Termination Kits Description
18-SXG-KIT1 Power Connection Gland Kit w/o Junction Box
ECA-1-SR-SP Metallic Power Connection Kit(Ordinary & Div 2 Aproved) with Junction Box
ECT-2-SR Metallic T-Splice Kit(Ordinary & Div 2 Aproved) with Junction Box
PCA-1-SR Non-metallic Power Connection Kit(Ordinary & Div 2 Aproved) with Junction Box
PCS-1-SR Non-metallic T-Splice Kit(Ordinary & Div 2 Aproved) with Splice Cover
HS-PBSK Inline Heat Shrink Splice Kit (Under Insulation)
HS-TBSK T-Splice Heat Shrink Kit (Under Insulation)
ET-6C End Termination Kit(Ordinary & Div 2 Approved)
Installation Accessories
Description
BTape Binding / Attachment Tape (1/2" X 60 yds)
CL Caution Labels (25 per Pack)
AL-20P Aluminum Tape (2” X 150”) for non-metallic pipe
Controls Description
R1-050-DP Indoor Thermostat
R3C-0120-DP Weatherproof Indoor / Outdoor Thermostat
ROOF AND GUTTER
Cable Description
TTS-8-1-OJ 8 W/FT @ 120V (500 / 1000 Foot Spools)
TTS-8-2-OJ 8 W/FT @ 240 (500 / 1000 Foot Spools)
Termination Kits Description
18-SXG-KIT1 Power Connection Gland Kit w/o Junction Box
ET-4S End Termination Kit
HS-PBSK Inline Splice with Heat Shrink
HS-TBSK T-Splice with Heat Shrink
Installation Accessories
Description
AL-20P Aluminum Tape (2" X 150") in gutter
CL Caution Labels (25 per Pack)
RG-CMC “P” Style Roof, Cable Mounting Clips (100/Bag)
RG-CRF Roof Clips, Cable Roof Fastener (25/Bag)
RG-DCH Downspout Cable Hanger
Controls Description
STC-DS2B Snow and Ice Sensor, Pole Mounted
STC-DS-8 Snow and Ice Sensor with a 10' Remote Lead Wire
RC3-0120-DP Weatherproof Indoor / Outdoor Thermostat
CONSTRUCTION 3M™ Self-regulating Heat Tracing Cables consist of two parallel, current-transmitting copper conductors, between which a semi-conducting heating element is embedded.
The current flows between the two copper conductors. This provides an infinite number of parallel resistances. Therefore the Heat Tracing Cable can be cut to any desired length without changing its properties.
In accordance with VDE 0100, the copper mesh serves as a safety conductor and provides a continuous ground path.
The outer protective jacket of polyolefin or fluoropolymer protects against corrosion, chemicals, and adverse environmental conditions.
ADVANTAGES •Self-regulating •NooverheatingCERTIFICATES AND APPROVALS Class 1 Div 2 Class 2 Div 2
1 Junction box supplied by installer
For concrete or ashphalt slab heating applications contact your local 3M Canada Representative.
22
Electrical Solutions
23
3MTM Aluminum Conductor Composite Reinforced (ACCR)
3MTM Flexible Insulation Solutions
3M™ ACCR provides reliable upgrade capacity, even in some of today’s most challenging applications. 3M™ ACCR is an advanced transmission conductor designed to replace ACSR or ACSS on existing structures, giving you up to two times the capacity, without the risks of a major construction project. Our highly qualified and experienced engineers can work with you to match the best 3M™ ACCR option to your needs. For specifications of all 3M™ ACCR sizes, as well as a complete library of lab and field tests, visit our website: www.3m.com/ACCR
3M™ High-Temperature Flexible Insulation papers and laminates provide premium-performance, cost-effective insulation which is an easy-to-use alternative for wire wrapping and for the manufacture and repair of motors, transformers, generators and other electrical devices. There are several families of products meet your needs, including:
•3M™CeQUIN™Inorganic Insulating Products
•3M™ThermaVolt™CalenderedInorganic Insulating Products
•3M™TufQUIN™Inorganic-OrganicHybrid Insulating Products
•3M™TuFR™Flame-RetardantInsulating Paper
www.3m.com/FlexibleInsulation
3M™ Aluminum Conductor Composite Reinforced (ACCR)
3M™ High-Temperature Flexible Insulation papers and laminates
3
Mining and Mineral Extraction 3M Canada CompanyPost Office Box 5757London, Ontario N6A 4T1Canada
Specialty Tapes
Fire Protection
Safety, Security and Protection
3M Worldwide, World Class
3M develops, manufactures and markets over 50,000 different consumer, commercial, industrial and health care products. We have manufacturing operations in 60 countries and do business in more than 200 countries. 3M can help you achieve corporate goals, meet and exceed government standards, simplify and improve the lives of your employees, and contribute to a safe, healthy and sustainable work environment.
3M, JobBox, Novec, Scotch, Scotchcast, ScotchCode, Scotchfil, Scotchrap, Scotchlok, Super 33+, Scotch-Seal, Temflex are trademarks of 3M. Used under license in Canada. TTS is a trademark of 3M Canada. Unishield is a trademark of BICC Cables. Krytox is a trademark of Dupont. Please recycle. All other trademarks referenced are the service marks, trademarks or registered trademarks of their respective companies. Printed in Canada. © 2013, 3M. All rights reserved. 1209-02494E
Ask about these additional electrical solutions from 3M
Wire Connectors
Separable Connectors
Important Notice All statements, technical information, and recommendations contained in this literature are based on information and testing 3M believes to be reliable. However, many factors beyond 3M’s control can affect a product’s use. The user is responsible to evaluate the 3M product to determine whether the product is fit for the user's particular purpose and application. Warranties and exclusive limited remedies for the products described in this literature are expressly stated on individual product literature, packaging, and data sheets. 3M warranties and limited remedies may not be created or modified orally. 3M offers no other remedies and makes no other warranties or conditions, express or implied, including any implied warranty or condition of merchantability or fitness for a particular purpose.
For More Information Customer Assistance 1-800-3M HELPS Internet www.3M.ca/electrical
www.3M.com/mining/canada
Fastening Products
Recommended