View
216
Download
0
Category
Preview:
Citation preview
BioClean TipsQuality, Purity and Performance
Pipe
tte T
ip C
atal
og2016
A broad selection of precision-engineered tips for most applications.
3
Rainin
Rainin Tip Technology
BioClean™ 4
LiteTouch™ System (LTS®) 6
Universal Fit 8
Packaging Options
Overview 12
TerraRack™ 14
Removable Cover Racks 18
Green-Pak™ and Green-Pak SpaceSaver™ 22
StableStak™ and StableRak™ 26
Bagged Tips 30
Special Application Tips
Overview 34
Filtered 38
Low Retention 42
Wide Orifice 46
ShaftGard™ 48
Large Volume 50
Extended Length 52
Gel-Well™ 53
Rainin and the Environment 54
4
Pipette Tips
Rainin BioCleanMaximum Performance for Superior Data Fidelity
For successful experiments, be sure your pipette tips are completely inert and won‘t interfere with your results. “Contamination-free“ isn‘t enough. To assure your tips are free of any bioactive components – make sure they‘re BioClean. From raw material selection to clean production and automated packaging, Rainin BioClean tips are guaranteed to be pure and completely safe for your sensitive samples and reactions.
Absolute Purity
Rainin‘s pure virgin polypropylene tip resin is purchased as CFR 21 certified pellets, free of any kind of additives or dyes, and is extensively tested.
• 100% Clean – free of biological contaminants
• 100% Pure – zero bioactive impurities
5
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
Clean Production and Packaging
Rainin BioClean tips are manufactured in a fully auto-mated, Class 100,000 clean room facility. To assure absolute purity, no additives or dyes are used, and ISO 9001-compliant manufacturing procedures are followed to eliminate all external sources of contamination.
Tested for Maximum Safety
BioClean tips are rigorously tested using the most sophisticated procedures available. Each lot is carefully evaluated to assure that even the smallest amount of DNA, DNase, RNase, Pyrogen, ATP, PCR inhibitors, trace materials and trace organics are detected.
Rainin BioClean tips are certified and guaranteed to be free of these biological contaminants:
• DNA • DNase • RNase • Pyrogen • ATP • PCR inhibitors
6
Pipette Tips
LTS LiteTouch SystemBecause Pipetting Shouldn’t Hurt
By rethinking how tips fit onto pipettes, the Rainin LiteTouch System dramatically reduces the amount of force required to load and eject tips. A small sealing ring near the top of the tip slides easily over the shaft, creating a firm, air-tight fit with minimal force and friction. LTS pipettes have cylindrical ends (not cone-shaped) and a positive stop inside the tip to guide the shaft to the correct insertion depth.
• Positive stop
Large sealing areacreates high friction
Small sealing ringsignificantly reduces friction
Conical shaft stretches the tip Positive stop
prevents jamming
The LTS Difference
Typical pipettes have cone-shaped shafts that rely on friction to hold tips firmly – the tip is literally forced to stretch around the shaft. And however much force it takes to insert the tips, at least as much force is required to eject them – most of which comes from your thumb.
Without LTS With LTS
• Small sealing ring
7
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
85% Less Force
Ejection force in typical pipette tip/shaft designs average 4 kg – but can be as high as 10 kg. Tip ejection with LTS is just 0.6 kg. With light springs and as little as 0.6 kg of force required for tip ejection, LTS-equipped pipettes reduce fatigue and allow you to concentrate on your work and pipetting technique.
4 kg
Thumb Force (kg)
Recommended 30% Female Max. Strength Capacity = 2.1 kg
Recommended 30% Male Max. Strength Capacity = 3.0 kg
LTS Cylindrical Tip & Shaft
Traditional Conical Tip & Shaft
0 1 2 3 4
0.6 kg
Tip Ejection Forces
8
Pipette Tips
Universal-fit TipsSuperior Quality and Performance
Rainin universal-fit tips provide outstanding performance for Rainin pipettes without LTS and most other pipette brands, including Gilson®, Eppendorf ®, Sartorious® (BioHit ®), ThermoFisher ® (Finnpipette®) and VWR®. Like all Rainin BioClean tips, our universal-fit tips are precision engineered and manufactured to ISO 9001 standards in Class 100,000 clean room conditions.
• Universal fit
Rainin universal-fit tips deliver superior performance on most major manufacturers‘ pipettes. To see the range of Rainin tip choices for your universal-fit pipette, use our online Tip Finder at:
www.mt.com/TipFinder
• BioClean
BioClean tips are manufactured under tightly-controlled cleanroom conditions for absolute cleanliness and purity. Each tip lot is rigorously tested, certified and guaranteed to be free of these biological contaminants:
• DNA
• DNase
• RNase
• Pyrogen
• ATP
• PCR inhibitors
9
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
• High quality
Rainin universal-fit tips are made from virgin polypropylene that has been optimized to perform across a wide array of applications.
• Exceptional purity assures that Rainin tips are completely free of leachables and exogenous additives, such as clarifiers, colorants or mold release agents
• Excellent clarity
• High chemical resistance
• Autoclavable
• Flexible
• Fine point
Rainin FinePoint™ universal-fit tips have a thin-walled orifice that reduces the tip surface area to minimize contact with the liquid when dispensing.
• Thin wall design provides tip flexibility for accurate touch-off
• Elongated, finely tapered tip for accurate aspiration and dispensing
• Narrow orifice for complete touch-off and release of liquid during dispensing
• Performance
Strong, supple polymer improves flexibility for more complete and accurate touch-off.
11
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
Packaging Options From eco-friendly to highly economical, Rainin BioClean tips are available in a wide range of packaging formats.
12
Packaging
Whatever your workplace or workflow, Rainin offers LTS and universal-fit BioClean tips in a format to meet your need.
Tip PackagingRacks, Stacks and Refills
Green-Pak SpaceSaver
The ultimate in convenience – easy to use, saves space and reduces plastic waste by 85%.
Page 23
Green-Pak
Single-rack refills reduce plastic waste by 75% compared to individual racks.
Page 22
TerraRack
Less weight, less waste and 100% recyclable. Pre-sterilized, single-use, disposable racks.
Page 14
13
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
Bagged tips Buying in bulk is the most economical way to get BioClean quality tips.
Page 30
StableStak
Multilayer stacks in double-96 format. Save space, 60% less plastic waste!
Page 27
StableRak
Individual double-96 racks. Ideal for filter-tip users, 35% less plastic waste.
Page 26
Removable Cover Racks
Optimal tip loading for single- and multi-channel pipettes. Autoclavable, refillable.
Page 18
14
Packaging
TerraRack is a revolutionary new concept in tip racks. They are sturdy as conventional racks, yet made with less than half the plastic and completely recyclable. In fact, the hinged TerraRack shell is made from PETE, which is easily recycled.
For convenience and complete cleanliness, TerraRacks with BioClean tips come pre-sterilized, eliminating the need to autoclave.*
TerraRackThe Most Eco-Friendly Rack Around
• 100% recyclable
In addition to being completely recyclable, much of each TerraRack is composed of PETE, which is easily recycled and aggressively recovered from the plastic waste stream.
*TerraRacks are non-autoclavable
15
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
Less Weight Less Waste 100% Recyclable
• Sterile
TerraRacks are pre-sterilized. Unlike refill systems, where there is a potential for placing clean tips into a contaminated rack, with TerraRack you can be certain that you’re working with a fresh, clean rack every time.
Less waste
With 50% less plastic than conventional racks, TerraRacks are also extremely compressi-ble, so used racks occupy significantly less space in waste or storage containers.
VS.
17www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
Rainin
TerraRacks are extremely sturdy, but for added stability on some surfaces, the TerraBase is a useful accessory. Available in short and tall size. TerraBase is made from polycarbonate, which is autoclavable and chemical resistant, has silicone feet and will give years of service.
ORDER No. DESCRIPTION MAX. CAPACITY
TerraRack LTS tips in PETE TerraRack with hinged lid
17014960 TR-L10S 960 LTS tips in 10 racks, presterilized 20 µL
17014961 TR-L10F 960 LTS tips in 10 racks, presterilized, filter 20 µL
17014962 TR-L250S 960 LTS tips in 10 racks, presterilized 200 µL
17014963 TR-L200F 960 LTS tips in 10 racks, presterilized, filter 200 µL
17014964 TR-L300S 768 LTS tips in 8 racks, presterilized 300 µL
17014965 TR-L300F 768 LTS tips in 8 racks, presterilized, filter 300 µL
17014966 TR-L1000S 768 LTS tips in 8 racks, presterilized 1000 µL
17014967 TR-L1000F 768 LTS tips in 8 racks, presterilized, filter 1000 µL
17014968 TR-L1200S 768 LTS tips in 8 racks, presterilized 1200 µL
17014969 TR-L1200F 768 LTS tips in 8 racks, presterilized, filter 1200 µL
ORDER No. DESCRIPTION MAX. CAPACITY
TerraRack Tips in PETE TerraRack with hinged lid
17014970 TR-10S 960 tips in 10 racks, presterilized 10 µL
17014971 TR-10F 960 tips in 10 racks, presterilized, filter 10 µL
17014972 TR-10GS 960 Shaf tGard tips in 10 racks, presterilized 10 µL
17014973 TR-10GF 960 Shaf tGard tips in 10 racks, presterilized, filter 10 µL
17014974 TR-20F 960 tips in 10 racks, presterilized, filter 30 µL
17014975 TR-100F 960 tips in 10 racks, presterilized, filter 100 µL
17014976 TR-250S 960 tips in 10 racks, presterilized 250 µL
17014977 TR-200F 960 tips in 10 racks, presterilized, filter 200 µL
17014978 TR-300S 768 tips in 8 racks, presterilized 300 µL
17014979 TR-300F 768 tips in 8 racks, presterilized, filter 300 µL
17014980 TR-1000S 768 tips in 8 racks, presterilized 1000 µL
17014981 TR-1000F 768 tips in 8 racks, presterilized, filter 1000 µL
ORDER No. DESCRIPTION
TerraBase Accessory for TerraRack
17014982 TR-SB TerraRack Base - short; 1 base to fit 10 - 300 µL TerraRack racks
17014983 TR-TB TerraRack Base - tall; 1 base to fit 1000/1200 µL TerraRack racks
TerraBase
LTS Tips for Rainin Pipet tes with the LiteTouch System
Universal Tips for Rainin, Pipetman® & all brands with universal shaf t design
18
Rainin removable cover racks are the workhorses of our tip product line. Trusted by leading laboratories around the world, Rainin removable cover racks are an easy way to store and manage tips. The tip boxes are extremely durable and refillable.
Removable Cover RacksFast Loading, Refillable Tip Racks
Packaging
• Refillable
Designed to work with the Rainin Green-Pak and Green-Pak SpaceSaver refill system.
• Fast loading
Robust racks make tip loading easy.
19
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
Rainin
Autoclavable Two-position lid for efficient sterilization.
• Fast loading
Robust racks make tip loading easy.
• Protective
Keep tips safe from dirt and contamination.
LTS models shown
20
LTS Tips for Rainin Pipet tes with the LiteTouch System
Removable Cover Racks
Packaging
ORDER NO. DESCRIPTION MAX. CAPACITY
Removable-cover RT-racks
17002930 RT-L10 960 LTS tips in 10 racks 20 µL
17002929 RT-L10S 960 LTS tips in 10 racks, presterilized 20 µL
17002928 RT-L10F 960 LTS tips in 10 racks, presterilized, filter 20 µL
17007955 RT-L10LR 960 LTS low retention tips in 10 racks 20 µL
17007956 RT-L10SLR 960 LTS low retention tips in 10 racks, presterilized 20 µL
17007957 RT-L10FLR 960 LTS low retention tips in 10 racks, presterilized, filter 20 µL
17002927 RT-L200F 960 LTS tips in 10 racks, presterilized, filter 200 µL
17007961 RT-L200FLR 960 LTS low retention tips in 10 racks, presterilized, filter 200 µL
17014294 RT-L200WFLR 960 LTS low retention wide orifice tips in 10 racks, presterilized, filter 200 µL
17008887 RT-L200XF 768 LTS extended lenght tips in 8 racks, presterilized, filter 200 µL
17002932 RT-L250 960 LTS tips in 10 racks 200 µL
17002931 RT-L250S 960 LTS tips in 10 racks, presterilized 200 µL
17007102 RT-L250W 960 LTS wide orifice tips in 10 racks 200 µL
17007101 RT-L250WS 960 LTS wide orifice tips in 10 racks, presterilized 200 µL
17007959 RT-L250LR 960 LTS low retention tips in 10 racks 200 µL
17007960 RT-L250SLR 960 LTS low retention tips in 10 racks, presterilized 200 µL
17014292 RT-L250WLR 960 LTS low retention wide orifice tips in 10 racks 200 µL
17014293 RT-L250WSLR 960 LTS low retention wide orifice tips in 10 racks, presterilized 200 µL
17008814 RT-L250X 768 LTS tips in 8 racks 200 µL
17008815 RT-L250XS 768 LTS tips in 8 racks, presterilized 200 µL
17002935 RT-L300 768 LTS tips in 8 racks 300 µL
17002934 RT-L300S 768 LTS tips in 8 racks, presterilized 300 µL
17002933 RT-L300F 768 LTS tips in 8 racks, presterilized, filter 300 µL
17002922 RT-L1000 768 LTS tips in 8 racks 1000 µL
17002921 RT-L1000S 768 LTS tips in 8 racks, presterilized 1000 µL
17002920 RT-L1000F 768 LTS tips in 8 racks, presterilized, filter 1000 µL
17007100 RT-L1000W 768 LTS wide orifice tips in 8 racks 1000 µL
17007099 RT-L1000WS 768 LTS wide orifice tips in 8 racks, presterilized 1000 µL
17007952 RT-L1000LR 768 LTS low retention tips in 8 racks 1000 µL
17007953 RT-L1000SLR 768 LTS low retention tips in 8 racks, presterilized 1000 µL
17007954 RT-L1000FLR 768 LTS low retention tips in 8 racks, presterilized, filter 1000 µL
17014295 RT-L1000WLR 768 LTS low retention wide orifice tips in 8 racks 1000 µL
17014296 RT-L1000WSLR 768 LTS low retention wide orifice tips in 8 racks, presterilized 1000 µL
17014297 RT-L1000WFLR 768 LTS low retention wide orifice tips in 8 racks, presterilized, filter 1000 µL
17008817 RT-L1000X 768 LTS tips in 8 racks 1200 µL
17008818 RT-L1000XS 768 LTS tips in 8 racks, presterilized 1200 µL
17008819 RT-L1000XF 768 LTS tips in 8 racks, presterilized, filter 1200 µL
17006421 RT-L1200 768 LTS tips in 8 racks 1200 µL
17006420 RT-L1200S 768 LTS tips in 8 racks, presterilized 1200 µL
17006419 RT-L1200F 768 LTS tips in 8 racks, presterilized, filter 1200 µL
17008026 RT-L1200LR 768 LTS low retention tips in 8 racks 1200 µL
17008027 RT-L1200SLR 768 LTS low retention tips in 8 racks, presterilized 1200 µL
17008028 RT-L1200FLR 768 LTS low retention tips in 8 racks, presterilized, filter 1200 µL
17002926 RT-L2000 480 LTS tips in 8 racks 2000 µL
17002924 RT-L2000S 480 LTS tips in 8 racks, presterilized 2000 µL
17002923 RT-L2000F 480 LTS tips in 8 racks, presterilized, filter 2000 µL
17002937 RT-L5000 192 LTS tips in 8 racks 5000 µL
17002936 RT-L5000S 192 LTS tips in 8 racks, presterilized 5000 µL
21
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
ORDER NO. DESCRIPTION MAX. CAPACITY
Removable-cover RT-racks
17002896 RT-10 960 tips in 10 racks 10 µL
17002905 RT-10S 960 tips in 10 racks, presterilized 10 µL
17002904 RT-10F 960 tips in 10 racks, presterilized, filter 10 µL
17002908 RT-10G 960 ShaftGard tips in 10 racks 10 µL
17002907 RT-10GS 960 ShaftGard tips in 10 racks, presterilized 10 µL
17002906 RT-10GF 960 ShaftGard tips in 10 racks, presterilized, filter 10 µL
17014343 RT-10LR 960 low retention tips in 10 racks 10 µL
17014344 RT-10SLR 960 low retention tips in 10 racks, presterilized 10 µL
17014345 RT-10FLR 960 low retention tips in 10 racks, presterilized, filter 10 µL
17014347 RT-10GLR 960 low retention ShaftGard tips in 10 racks 10 µL
17014348 RT-10GSLR 960 low retention ShaftGard tips in 10 racks, presterilized 10 µL
17014349 RT-10GFLR 960 low retention ShaftGard tips in 10 racks, presterilized, filter 10 µL
17002917 RT-20F 960 tips in 10 racks, presterilized, filter 30 µL
17014351 RT-20FLR 960 low retention tips in 10 racks, presterilized, filter 30 µL
17002903 RT-100F 960 tips in 10 racks, presterilized, filter 100 µL
17014352 RT-100FLR 960 low retention tips in 10 racks, presterilized, filter 100 µL
17002912 RT-200F 960 tips in 10 racks, presterilized, filter 200 µL
17014356 RT-200FLR 960 low retention tips in 10 racks, presterilized, filter 200 µL
17014364 RT-200WFLR 960 low retention wide orifice tips in 10 racks, presterilized, filter 200 µL
17002916 RT-250 960 tips in 10 racks 250 µL
17002913 RT-250S 960 tips in 10 racks, presterilized 250 µL
17007958 RT-250LR 960 low retention tips in 10 racks 250 µL
17014354 RT-250SLR 960 low retention tips in 10 racks, presterilized 250 µL
17014362 RT-250WLR 960 low retention wide orifice tips in 10 rackl 250 µL
17014363 RT-250WSLR 960 low retention wide orifice tips in 10 racks, presterilized 250 µL
17002902 RT-1000 768 tips in 8 racks 1000 µL
17002901 RT-1000S 768 tips in 8 racks, presterilized 1000 µL
17002897 RT-1000F 768 tips in 8 racks, presterilized, filter 1000 µL
17014359 RT-1000LR 768 low retention tips in 8 racks 1000 µL
17014360 RT-1000SLR 768 low retention tips in 8 racks, presterilized 1000 µL
17014361 RT-1000FLR 768 low retention tips in 8 racks, presterilized, filter 1000 µL
17002911 RT-2000 480 tips in 8 racks 2000 µL
17002910 RT-2000S 480 tips in 8 racks, presterilized 2000 µL
17002909 RT-2000F 480 tips in 8 racks , presterilized, filter 2000 µL
17002919 RT-5000 192 tips in 8 racks 5000 µL
17002918 RT-5000S 192 tips in 8 racks, presterilized 5000 µL
Universal Tips for Rainin, Pipetman® & all brands with universal shaf t design
22
Packaging
Green-Pak and Green-Pak SpaceSaverEco-Friendly Refills
Rainin Green-Pak and Green-Pak SpaceSaver not only save space, they reduce plastic waste and their packaging is made of recycled materials.
Green-Pak individual rack refillsGreen-Pack is an individually packaged and wrapped refill pack for Rainin tip racks. They‘re an economical and ecological solution, particularly for filter tips.
• Eco-sensitive
Protective shell made from recycled PETE
• Clean
Each refill is completely sealed
• Easy
Load refills without touching the tips
• Filtered and/or pre-sterilized
A great refill option for filter tip users.
23
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
SpaceSaver stacked refill systemEach SpaceSaver has 8 or 10 rack refills in a compact, east-to-use sleeve made from recycled PETE. Perfect for labs with limited space.
• Protective
Rigid shell, lid and base protect tips from damage and debris
Green-Pak dispensers and shells are made from
100% recycled PETE.
Recycled PETE!
• Filtered and/or pre-sterilized
A great refill option for filter tip users.
24
Packaging
Green-Pak and Green-Pak SpaceSaverLess Waste, More Space
LTS Tips for Rainin Pipet tes with the LiteTouch System
ORDER No. DESCRIPTION MAX. CAPACITY
Green-Pak SpaceSaver stacked refills for RT-racks
17005091 GPS-L10 960 LTS tips in 10 refills 20 µL
17005090 GPS-L10S 960 LTS tips in 10 refills, presterilized 20 µL
17014307 GPS-L10LR 960 LTS low retention tips in 10 refills 20 µL
17014335 GPS-L10SLR 960 LTS low retention tips in 10 refills, presterilized 20 µL
17005093 GPS-L250 960 LTS tips in 10 refills 200 µL
17005092 GPS-L250S 960 LTS tips in 10 refills, presterilized 200 µL
17014336 GPS-L250LR 960 LTS low retention tips in 10 refills 200 µL
17014337 GPS-L250SLR 960 LTS low retention tips in 10 refills, presterilized 200 µL
17005095 GPS-L300 768 LTS tips in 8 refills 300 µL
17005094 GPS-L300S 768 LTS tips in 8 refills, presterilized 300 µL
17005089 GPS-L1000 768 LTS tips in 8 refills 1000 µL
17005088 GPS-L1000S 768 LTS tips in 8 refills, presterilized 1000 µL
17014338 GPS-L1000LR 768 LTS low retention tips in 8 refills 1000 µL
17014339 GPS-L1000SLR 768 LTS low retention tips in 8 refills, presterilized 1000 µL
Green-Pak individual refills for RT-racks
17002424 GP-L10 960 LTS tips in 10 refills 20 µL
17002430 GP-L10S 960 LTS tips in 10 refills, presterilized 20 µL
17002429 GP-L10F 960 LTS tips in 10 refills, presterilized, filter 20 µL
17002428 GP-L200F 960 LTS tips in 10 refills, presterilized, filter 200 µL
17002425 GP-L250 960 LTS tips in 10 refills 200 µL
17002431 GP-L250S 960 LTS tips in 10 refills, presterilized 200 µL
17002423 GP-L1000 768 LTS tips in 8 refills 1000 µL
17002427 GP-L1000S 768 LTS tips in 8 refills, presterilized 1000 µL
17002426 GP-L1000F 768 LTS tips in 8 refills, presterilized, filter 1000 µL
Empty racks for refills
17001865 GPR-L10 Empty racks for 20 µL tips, red, pkg of 10
17001863 GPR-L250 Empty racks for 200/250 µL tips, green, pkg of 10
17001864 GPR-L1000 Empty racks for 1000 µL tips, blue, pkg of 8
25
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
ORDER NO. DESCRIPTION MAX. CAPACITY
Green-Pak SpaceSaver stacked refills for RT-racks
17005085 GPS-10G 960 Shaf tGard tips in 10 refills 10 µL
17005084 GPS-10GS 960 ShaftGard tips in 10 refills, presterilized 10 µL
17014381 GPS-10GLR 960 low retention ShaftGard tips in 10 refills 10 µL
17014383 GPS-10GSLR 960 low retention ShaftGard tips in 10 refills, presterilized 10 µL
17005087 GPS-250 960 tips in 10 refills 250 µL
17005086 GPS-250S 960 tips in 10 refills, presterilized 250 µL
17014385 GPS-250LR 960 low retention tips in 10 refills 250 µL
17014386 GPS-250SLR 960 low retention tips in 10 refills, presterilized 250 µL
17005083 GPS-1000 768 tips in 8 refills 1000 µL
17005082 GPS-1000S 768 tips in 8 refills, presterilized 1000 µL
17014387 GPS-1000LR 768 low retention tips in 8 refills 1000 µL
17014394 GPS-1000SLR 768 low retention tips in 8 refills, presterilized 1000 µL
Green-Pak individual refills for RT-racks
17002419 GP-10 960 tips in 10 refills 10 µL
17002415 GP-10S 960 tips in 10 refills, presterilized 10 µL
17002414 GP-10F 960 tips in 10 refills, presterilized, filter 10 µL
17002416 GP-10GF 960 ShaftGard tips in 10 refills, presterilized, filter 10 µL
17002422 GP-20F 960 tips in 10 refills, presterilized, filter 30 µL
17002413 GP-100F 960 tips in 10 refills, presterilized, filter 100 µL
17002420 GP-200F 960 tips in 10 refills, presterilized, filter 200 µL
17002409 GP-250 960 tips in 10 refills 250 µL
17002421 GP-250S 960 tips in 10 refills, presterilized 250 µL
17002412 GP-1000 768 tips in 8 refills 1000 µL
17002411 GP-1000S 768 tips in 8 refills, presterilized 1000 µL
17002410 GP-1000F 768 tips in 8 refills, presterilized, filter 1000 µL
Empty racks for refills
17001860 GPR-10 Empty racks for 10 µL tips, purple, pkg of 10
17001862 GPR-10G Empty racks for Shaf tGard 10 µL tips, red, pkg of 10
17001861 GPR-250 Empty racks for 200/250 µL tips, green, pkg of 10
17001859 GPR-1000 Empty racks for 1000 µL tips blue, pkg of 10
Universal Tips for Rainin, Pipetman® & all brands with universal shaf t design
26
Packaging
StableRak and StableStak Double 96-tip Racks and StacksIdeal for multichannels, Rainin StableRak and StableStak simplify high-throughput work while reducing rack clutter and waste. Each rack contains 192 tips in an 8-by-12 standard format.
• Filtered
A great rack option for filter tip users.
• Stable
Non-skid feet to prevent sliding and tip spillage.
StableRak individual racksStableRak is an individual double 96-tip rack for high-throughput pipetting. Compared to two individual conventional racks, StableRak produces 35% less plastic waste.
• Efficient
Perfect for high-throughput.
• Easy
Deep-well for mounting tips quickly.
27
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
• Eco-sensitive
60% less plastic waste.
StableStak multilayer racksRainin‘s multilayer StableStak system streamlines high-production multichannel work. Engineered with 192 tips per layer, each StableStak system is equivalent to eight or ten 96-tip racks.
• Compact
Takes the place of multiple individual racks.
28
Packaging
LTS Tips for Rainin Pipet tes with the LiteTouch System
ORDER No. DESCRIPTION MAX. CAPACITY
StableRak double-96-format individual racks
17005862 SR-L10 960 LTS tips in 5 racks 20 µL
17005861 SR-L10S 960 LTS tips in 5 racks, presterilized 20 µL
17005860 SR-L10F 960 LTS tips in 5 racks, presterilized, filter 20 µL
17005859 SR-L200F 960 LTS tips in 5 racks, presterilized, filter 200 µL
17005864 SR-L250 960 LTS tips in 5 racks 200 µL
17005863 SR-L250S 960 LTS tips in 5 racks, presterilized 200 µL
17005867 SR-L300 768 LTS tips in 4 racks 300 µL
17005866 SR-L300S 768 LTS tips in 4 racks, presterilized 300 µL
17005865 SR-L300F 768 LTS tips in 4 racks, presterilized, filter 300 µL
17007083 SR-L1000 768 LTS tips in 4 racks 1000 µL
17007082 SR-L1000S 768 LTS tips in 4 racks, presterilized 1000 µL
17007081 SR-L1000F 768 LTS tips in 4 racks, presterilized, filter 1000 µL
17007086 SR-L1200 768 LTS tips in 4 racks 1200 µL
17007085 SR-L1200S 768 LTS tips in 4 racks, presterilized 1200 µL
17007084 SR-L1200F 768 LTS tips in 4 racks, presterilized, filter 1200 µL
ORDER No. DESCRIPTION MAX. CAPACITY
StableStak double-96-format stacked racks
17005873 SS-L10 960 LTS tips in 5 layers 20 µL
17005872 SS-L10S 960 LTS tips in 5 layers, presterilized 20 µL
17005875 SS-L250 960 LTS tips in 5 layers 200 µL
17005874 SS-L250S 960 LTS tips in 5 layers, presterilized 200 µL
17005877 SS-L300 768 LTS tips in 4 layers 300 µL
17005876 SS-L300S 768 LTS tips in 4 layers, presterilized 300 µL
17007090 SS-L1000 768 LTS tips in 4 layers 1000 µL
17007089 SS-L1000S 768 LTS tips in 4 layers, presterilized 1000 µL
StableStak and StableRak Maximum Stability for Multichannel Work
These double 96-tip racks will save time and increase your productivity.
29
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
ORDER No. DESCRIPTION MAX. CAPACITY
StableRak double-96-format individual racks
17005857 SR-300 768 tips in 4 racks 300 µL
Universal Tips for Rainin, Pipetman® & all brands with universal shaf t design
30
Packaging
Bagged TipsHighest Quality at the Lowest Price
• Convenient
Packaged in re-sealable zip-top bags.
• BioClean
No RNase, DNase, DNA, pyrogens, PCR inhibitors or ATP – guaranteed!
• All sizes
From 10 µL to 10 ML
Buying in bulk is the most economical way to purchase premium quality BioClean tips. These are the exact same BioClean tips found in other packaging formats, but in re-sealable zip-top bags.
31
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
LTS Tips for Rainin Pipet tes with the LiteTouch System
Universal Tips for Rainin, Pipetman® & all brands with universal shaf t design
ORDER No. DESCRIPTION MAX. CAPACITY
Bulk tips
17001128 RC-L10 1000 LTS tips in bags 20 µL
17014340 RC-L10LR 1000 LTS low retention tips in bags 20 µL
17001118 RC-L250 1000 LTS tips in bags 200 µL
17014341 RC-L250LR 1000 LTS low retention tips in bags 200 µL
17001132 RC-L300 1000 LTS tips in bags 300 µL
17001129 RC-L1000 1000 LTS tips in bags 1000 µL
17014342 RC-L1000LR 1000 LTS low retention tips in bags 1000 µL
17006324 RC-L1200 1000 LTS tips in bags 1200 µL
17001130 RC-L2000 1000 LTS tips in bags 2000 µL
17001133 RC-L5000 1000 LTS tips in bags 5000 µL
17001119 RC-L10ML 200 LTS tips in bags 10 mL
17005940 RC-L10MLS 75 LTS tips in bags, presterilized, indiv. wrapped 10 mL
17001131 RC-L20ML 100 LTS tips in bags 20 mL
17005941 RC-L20MLS 50 LTS tips in bags, presterilized, indiv. wrapped 20 mL
ORDER No. DESCRIPTION MAX. CAPACITY
Bulk tips
17001124 RC-10 1000 tips in bags 10 µL
17001123 RC-10G 1000 ShaftGard tips in bags 10 µL
17014395 RC-10LR 1000 low retention tips in bags 10 µL
17014396 RC-10GLR 1000 low retention ShaftGard tips in bags 10 µL
17001116 RC-250 1000 tips in bags 250 µL
17001127 RC-250W 1000 wide orifice tips in bags 250 µL
17014397 RC-250LR 1000 low retention tips in bags 250 µL
17001121 RC-1000 1000 tips in bags 1000 µL
17014398 RC-1000LR 1000 low retention tips in bags 1000 µL
17015068 RC-1000WLR 1000 low retention, wide orifice tips in bags 1000 µL
17001125 RC-2000 1000 tips in bags 2000 µL
17001126 RC-2500 1000 tips in bags 2500 µL
17001117 RC-5000 1000 tips in bags 5000 µL
17001122 RC-10ML 200 tips in bags 10 mL
17005939 RC-10MLS 75 tips in bags, presterilized, indiv. wrapped 10 mL
33
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
Tips for Special Applications Rainin offers a broad range of ultra-high quality BioClean tips specifically designed for your unique applications.
34
Special Application Tips
Special tips for demanding applications.
Specialty TipsFor Specialized Applications
Filter Tips
Protect against aerosol contamination.
Page 38
Low Retention Tips
Pipette challenging liquids with ease.
Page 42
With FilterWithout FilterLow Retention
10 µL TipStandard 10 µL Tip
Filter
35
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
Wide Orifice Tips
Ideal for dense and delicate samples.
Page 46
ShaftGard
Avoid pipette contamination.
Page 48
250 µL LTS 1000 µL LTS 250 µL UNV 1000 µL UNV Standard 10 µL Tip
Shaft and tip ejector protected from
contamination from vessel walls
Shaft and tip ejector may be
contaminated by vessel walls
ShaftGard™ 10 µL Tip
Tips shown are not to scale
36
2000 µL 5000 µL 10 mL 20 mL
Special Application Tips
Special tips to optimize your workflows.
Specialty TipsFor Specialized Applications
Large Volume Tips
For macro-volume pipetting.
Page 50
Extended Length Tips
For tall narrow tube work.
Page 52
250 μL LTS TipsStandard Extended
1000 μL LTS TipsStandard Extended
37www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
Rainin
Gel-Well™
Load thin polyacrylamide gels.
Page 53
10 µL Flat
10 µLRound
250 µL Flat
250 µLRound
Tips shown are not to scale
38
Special Application Tips
Filter TipsProtect Against Aerosol Contamination
While some tip filters contain additives that can inhibit enzymatic reactions, Rainin filter tips are made from pure virgin polyethylene. Sintered polyethylene particles prevent aerosols and liquids from being aspirated into the body of the pipette, yet are completely inert and non-reactive.
Rainin filters are machine-loaded to assure that tips remain completely untouched during manufacturing and packaging.
Rainin Certified Guaranteed to produce accurate and precise measurements when used with Rainin pipettes and in accordance with their instruction manuals.BioClean No RNase, DNase, DNA, pyrogens, PCR inhibitors or ATP – guaranteed!
With filterWithout filter
Piston
Pipette Shaft
Aerosol free
Filter
Aerosols
Sample
39
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
• Pre-sterilized
All filter tips are pre-sterilized by radiation after packaging as added protection for biological samples. Machine-loaded, these tips are certified free of RNase, DNase, DNA, pyrogen, PCR inhibitors, and ATP contamination.
• Less restrictive
Rainin filters have an average pore size of 40 microns, which is less restrictive and doesn’t increase resistance or affect pipetting accuracy.
• Air gap
The significant gap between the sample at maximum volume and filter bottom prevents liquid from making contact with the filter, effectively guarding against filter wetting and pipette contamination.
40
Special Application Tips
LTS Tips for Rainin Pipet tes with the LiteTouch System
ORDER No. DESCRIPTION MAX. CAPACITY
Removable-cover
17002928 RT-L10F 960 LTS tips in 10 racks, presterilized, filter 20 µL
17007957 RT-L10FLR 960 LTS Low retention tips in 10 racks, presterilized, filter 20 µL
17002927 RT-L200F 960 LTS tips in 10 racks, presterilized, filter 200 µL
17007961 RT-L200FLR 960 LTS low retention tips in 10 racks, presterilized, filter 200 µL
17014294 RT-L200WFLR 960 LTS low retention wide orifice tips in 10 racks, presterilized, filter 200 µL
17008887 RT-L200XF 768 LTS tips in 8 racks, presterilized, filter 200 µL
17002933 RT-L300F 768 LTS tips in 8 racks, presterilized, filter 300 µL
17002920 RT-L1000F 768 LTS tips in 8 racks, presterilized, filter 1000 µL
17007954 RT-L1000FLR 768 LTS low retention tips in 8 racks, presterilized, filter 1000 µL
17014297 RT-L1000WFLR 768 LTS low retention wide orifice tips in 8 racks, presterilized, filter 1000 µL
17008819 RT-L1000XF 768 LTS tips in 8 racks, presterilized, filter 1000 µL
17006419 RT-L1200F 768 LTS tips in 8 racks, presterilized, filter 1200 µL
17008028 RT-L1200FLR 768 LTS low retention tips in 8 racks, presterilized, filter 1200 µL
17002923 RT-L2000F 480 LTS tips in 8 racks, presterilized, filter 2000 µL
Green-Pak
17002429 GP-L10F 960 LTS tips in 10 refills, presterilized, filter 20 µL
17002428 GP-L200F 960 LTS tips in 10 refills, presterilized, filter 200 µL
17002426 GP-L1000F 768 LTS tips in 8 refills, presterilized, filter 1000 µL
StableRak
17005860 SR-L10F 960 LTS tips in 5 racks, presterilized, filter 20 µL
17005859 SR-L200F 960 LTS tips in 5 racks, presterilized, filter 200 µL
17005865 SR-L300F 768 LTS tips in 4 racks, presterilized, filter 300 µL
17007081 SR-L1000F 768 LTS tips in 4 racks, presterilized, filter 1000 µL
17007084 SR-L1200F 768 LTS tips in 4 racks, presterilized, filter 1200 µL
TerraRack
17014961 TR-L10F 960 LTS tips in 10 racks, presterilized, filter 20 µL
17014963 TR-L200F 960 LTS tips in 10 racks, presterilized, filter 200 µL
17014965 TR-L300F 768 LTS tips in 8 racks, presterilized, filter 300 µL
17014967 TR-L1000F 768 LTS tips in 8 racks, presterilized, filter 1000 µL
17014969 TR-L1200F 768 LTS tips in 8 racks, presterilized, filter 1200 µL
Filter TipsProtect Against Aerosol Contamination
41
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
ORDER No. DESCRIPTION MAX. CAPACITY
Removable-cover
17002904 RT-10F 960 tips in 10 racks, presterilized, filter 10 µL
17002906 RT-10GF 960 ShaftGard tips in 10 racks, presterilized, filter 10 µL
17014345 RT-10FLR 960 low retention tips in 10 racks, presterilized, filter 10 µL
17014349 RT-10GFLR 960 low retention ShaftGard tips in 10 racks, presterilized, filter 10 µL
17002917 RT-20F 960 tips in 10 racks, presterilized, filter 30 µL
17014351 RT-20FLR 960 low retention tips in 10 racks, presterilized, filter 30 µL
17002903 RT-100F 960 tips in 10 racks, presterilized, filter 100 µL
17014352 RT-100FLR 960 Low retention tips in 10 racks, presterilized, filter 100 µL
17002912 RT-200F 960 tips in 10 racks, presterilized, filter 200 µL
17014356 RT-200FLR 960 low retention tips in 10 racks, presterilized, filter 200 µL
17014364 RT-200WFLR 960 low retention wide orifice tips in 10 racks, presterilized, filter 200 µL
17002897 RT-1000F 768 tips in 8 racks, presterilized, filter 1000 µL
17014361 RT-1000FLR 768 low retention tips in 8 racks, presterilized, filter 1000 µL
17002909 RT-2000F 480 tips in 8 racks , presterilized, filter 2000 µL
Green-Pak
17002414 GP-10F 960 tips in 10 refills, presterilized, filter 10 µL
17002416 GP-10GF 960 ShaftGard tips in 10 refills, presterilized, filter 10 µL
17002422 GP-20F 960 tips in 10 refills, presterilized, filter 30 µL
17002413 GP-100F 960 tips in 10 refills, presterilized, filter 100 µL
17002420 GP-200F 960 tips in 10 refills, presterilized, filter 200 µL
17002410 GP-1000F 768 tips in 8 refills, presterilized, filter 1000 µL
TerraRack
17014971 TR-10F 960 tips in 10 racks, presterilized, filter 10 µL
17014973 TR-10GF 960 ShaftGard tips in 10 racks, presterilized, filter 10 µL
17014974 TR-20F 960 tips in 10 racks, presterilized, filter 30 µL
17014975 TR-100F 960 tips in 10 racks, presterilized, filter 100 µL
17014977 TR-200F 960 tips in 10 racks, presterilized, filter 200 µL
17014979 TR-300F 768 tips in 8 racks, presterilized, filter 300 µL
17014981 TR-1000F 768 tips in 8 racks, presterilized, filter 100 µL
Universal Tips for Rainin, Pipetman® & all brands with universal shaf t design
42
Rainin LR low retention tips improve pipetting accuracy by minimizing residual volume, particularly when transferring liquids with different tensions, viscosities and other physical or chemical properties.
• Significantly less residual volume
Propylene glycol in food coloring can interact with the polypropylene surface, causing it to sheet or coat the tip interior. Shown here, the highly repellent fluoropolymer field in Rainin LR tips forces the dye to glide smoothly over the polypropylene surface and prevent sheeting.
Low Retention Tips Improve Pipetting Accuracy
Low Retention 10 µL Tip
Standard 10 µL Tip
Special Application Tips
43www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
Superior performance
Rainin LR tips prevent samples from interacting with the polypropylene surface of the tip. We employ a unique manufacturing process to produce tips with a uniform field of highly-repellent fluoropolymer molecules that form an impenetrable “superhydrophobic” surface. The result: liquids and molecules are suspended above the tip surface, allowing problem liquids to glide effortlessly in and out of the tip.
• Uniform field The dense, uniform field of fluoropolymer molecules on the surface of Rainin LR tips is integrated into the polypropylene and resistant to autoclaving.
•
•
• Highly-repellent surface “Normalizes” the movement of liquids with diverse compositions for accurate pipetting across a range of applications.
44
Special Application Tips
LTS Tips for Rainin Pipet tes with the LiteTouch System
ORDER No. DESCRIPTION MAX. CAPACITY
Low retention tips in removable-cover RT-racks
17007955 RT-L10LR 960 LTS low retention tips in 10 racks 20 µL
17007956 RT-L10SLR 960 LTS low retention tips in 10 racks, presterilized 20 µL
17007957 RT-L10FLR 960 LTS low retention tips in 10 racks, presterilized, filter 20 µL
17007961 RT-L200FLR 960 LTS low retention tips in 10 racks, presterilized, filter 200 µL
17014294 RT-L200WFLR 960 LTS low retention wide orifice tips in 10 racks, presterilized, filter 200 µL
17007959 RT-L250LR 960 LTS low retention tips in 10 racks 200 µL
17007960 RT-L250SLR 960 LTS low retention tips in 10 racks, presterilized 200 µL
17014292 RT-L250WLR 960 LTS low retention wide orifice tips in 10 racks 200 µL
17014293 RT-L250WSLR 960 LTS low retention wide orifice tips in 10 racks, presterilized 200 µL
17007952 RT-L1000LR 768 LTS low retention tips in 8 racks 1000 µL
17007953 RT-L1000SLR 768 LTS low retention tips in 8 racks, presterilized 1000 µL
17007954 RT-L1000FLR 768 LTS low retention tips in 8 racks, presterilized, filter 1000 µL
17014295 RT-L1000WLR 768 LTS low retention wide orifice tips tips in 8 racks 1000 µL
17014296 RT-L1000WSLR 768 LTS low retention wide orifice tips in 8 racks, presterilized 1000 µL
17014297 RT-L1000WFLR 768 LTS low retention wide orifice tips in 8 racks, presterilized, filter 1000 µL
17008026 RT-L1200LR 768 LTS low retention tips in 8 racks 1200 µL
17008027 RT-L1200SLR 768 LTS low retention tips in 8 racks, presterilized 1200 µL
17008028 RT-L1200FLR 768 LTS low retention tips in 8 racks, presterilized, filter 1200 µL
Low retention tips in Green-Pak SpaceSaver
17014307 GPS-L10LR 960 LTS low retention tips in 10 refills 20 µL
17014335 GPS-L10SLR 960 LTS low retention tips in 10 refills, presterilized 20 µL
17014336 GPS-L250LR 960 LTS low retention tips in 10 refills 200 µL
17014337 GPS-L250SLR 960 LTS low retention tips in 10 refills, presterilized 200 µL
17014338 GPS-L1000LR 768 LTS low retention tips in 8 refills 1000 µL
17014339 GPS-L1000SLR 768 LTS low retention tips in 8 refills, presterilized 1000 µL
Bulk tips
17014340 RC-L10LR 1000 LTS low retention tips in bags 20 µL
17014341 RC-L250LR 1000 LTS low retention tips in bags 200 µL
17014342 RC-L1000LR 1000 LTS low retention tips in bags 1000 µL
Low Retention Tips Superhydrophobic for Superior Performance
45
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
ORDER No. DESCRIPTION MAX. CAPACITY
Low retention tips in removable-cover RT-racks
17014343 RT-10LR 960 low retention tips in 10 racks 10 µL
17014344 RT-10SLR 960 low retention tips in 10 racks, presterilized 10 µL
17014345 RT-10FLR 960 low retention tips in 10 racks, presterilized, filter 10 µL
17014347 RT-10GLR 960 low retention ShaftGard tips in 10 racks 10 µL
17014348 RT-10GSLR 960 low retention ShaftGard tips in 10 racks, presterilized 10 µL
17014349 RT-10GFLR 960 low retention ShaftGard tips in 10 racks, presterilized, filter 10 µL
17014351 RT-20FLR 960 low retention tips in 10 racks, presterilized, filter 30 µL
17014352 RT-100FLR 960 low retention tips in 10 racks, presterilized, filter 100 µL
17014356 RT-200FLR 960 low retention tips in 10 racks, presterilized, filter 200 µL
17014364 RT-200WFLR 960 low retention wide orifice tips in 10 racks, presterilized, filter 200 µL
17007958 RT-250LR 960 low retention tips in 10 racks 250 µL
17014354 RT-250SLR 960 low retention tips in 10 racks, presterilized 250 µL
17014362 RT-250WLR 960 low retention wide orifice tips in 10 racks 250 µL
17014363 RT-250WSLR 960 low retention wide orifice tips in 10 racks, presterilized 250 µL
17014359 RT-1000LR 768 low retention tips in 8 racks 1000 µL
17014360 RT-1000SLR 768 low retention tips in 8 racks, presterilized 1000 µL
17014361 RT-1000FLR 768 low retention tips in 8 racks, presterilized, filter 1000 µL
Low retention tips in Green-Pak SpaceSaver
17014381 GPS-10GLR 960 low retention ShaftGard tips in 10 refills 10 µL
17014383 GPS-10GSLR 960 low retention ShaftGard tips in 10 refills, presterilized 10 µL
17014385 GPS-250LR 960 low retention tips in 10 refills 250 µL
17014386 GPS-250SLR 960 low retention tips in 10 refills, presterilized 250 µL
17014387 GPS-1000LR 768 low retention tips in 8 refills 1000 µL
17014394 GPS-1000SLR 768 low retention tips in 8 refills, presterilized 1000 µL
Bulk tips
17014395 RC-10LR 1000 low retention tips in bags 10 µL
17014396 RC-10GLR 1000 low retention ShaftGard tips in bags 10 µL
17014397 RC-250LR 1000 low retention tips in bags 250 µL
17014398 RC-1000LR 1000 low retention tips in bags 1000 µL
17015068 RC-1000WLR 1000 low retention wide orifice tips in bags 1000 µL
Universal Tips for Rainin, Pipetman® & all brands with universal shaf t design
46
Special Application Tips
Large Aperture Viscous liquids and particles flow freely.Various Formats Standard, pre-sterilized and filter versions available. BioClean No RNase, DNase, DNA, pyrogens, PCR inhibitors or ATP – guaranteed!
Wide orifice tips have 1.5 mm apertures to minimize shear force on delicate samples and flow resistance for viscous samples.
Wide Orifice TipsProtect Delicate Samples
• Minimal shear force
The larger opening of wide orifice tips reduces shear force when aspirating and dispensing viscous, particulate or otherwise difficult solutions.
• Sample protection
Wide orifice tips are ideal for protecting the viability of cultured cells and maintaining the integrity of high molecular weight DNA.
• Low retention
Wide orifice LR (low retention) tips combine a wide aperture with a super-repellent fluoropolymer surface to aid in the dispensing of viscous/ syrupy liquids, cultured cells and high-molecular weight polymers.
47
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
ORDER No. DESCRIPTION MAX. CAPACITY
Wide orifice tips in removable-cover RT-racks
17014294 RT-L200WFLR 960 LTS low retention wide orifice tips in 10 racks, presterilized, filter 200 µL
17007102 RT-L250W 960 LTS wide orifice tips in 10 racks 200 µL
17007101 RT-L250WS 960 LTS wide orifice tips in 10 racks, presterilized 200 µL
17014292 RT-L250WLR 960 LTS low retention wide orifice tips in 10 racks 200 µL
17014293 RT-L250WSLR 960 LTS low retention wide orifice tips in 10 racks, presterilized 200 µL
17007100 RT-L1000W 768 LTS wide orifice tips in 8 racks 1000 µL
17007099 RT-L1000WS 768 LTS wide orifice tips in 8 racks, presterilized 1000 µL
17014295 RT-L1000WLR 768 LTS low retention wide orifice tips tips in 8 racks 1000 µL
17014296 RT-L1000WSLR 768 LTS low retention wide orifice tips in 8 racks, presterilized 1000 µL
17014297 RT-L1000WFLR 768 LTS low retention wide orifice tips in 8 racks, presterilized, filter 1000 µL
LTS Tips for Rainin Pipet tes with the LiteTouch System
Universal Tips for Rainin, Pipetman® & all brands with universal shaf t design
ORDER No. DESCRIPTION MAX. CAPACITY
Wide orifice tips in removable-cover RT-racks
17014364 RT-200WFLR 960 low retention wide orifice tips in 10 racks, presterilized, filter 200 µL
17014362 RT-250WLR 960 low retention wide orifice tips in 10 racks 250 µL
17014363 RT-250WSLR 960 low retention wide orifice tips in 10 racks, presterilized 250 µL
Bulk tips
17001127 RC-250W 1000 wide orifice tips in bags 250 µL
17015068 RC-1000WLR 1000 low retention wide orifice tips in bags 1000 µL
48
Pipette Tips
Various Formats Standard, pre-sterilized, low retention and filter versions available. BioClean No RNase, DNase, DNA, pyrogens, PCR inhibitors or ATP – guaranteed!
ShaftGard tips enclose the pipette‘s tip ejector and shaft, protecting it from accidental contamination and reducing maintenance of the shaft and tip ejector when working with biological or other critical samples.
ShaftGardPrevent Cross-Contamination
• Reduce pipette contamination
ShaftGard tips reduce contamination of the shaft and tip ejector. The tip encloses the tip ejector. The tip is ejected by pressing on the “shoulder” inside the tip – affording further protection against contamination.
• Longer length
ShaftGard tips are significantly longer than standard micro-10 tips for easier access into microcentrifuge and PCR tubes.
• Reduce maintenance
Enclosing the pipette shaft and tip ejector in the tip reduces the need to decontaminate or sterilize the pipette.
49
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
ORDER No. DESCRIPTION MAX. CAPACITY
ShaftGard in removable-cover RT-racks
17002908 RT-10G 960 Shaf tGard tips in 10 racks 10 µL
17002907 RT-10GS 960 ShaftGard tips in 10 racks, presterilized 10 µL
17002906 RT-10GF 960 ShaftGard tips in 10 racks, presterilized, filter 10 µL
17014347 RT-10GLR 960 Low retention ShaftGard tips in 10 racks 10 µL
17014348 RT-10GSLR 960 Low retention ShaftGard tips in 10 racks, presterilized 10 µL
17014349 RT-10GFLR 960 Low retention ShaftGard tips in 10 racks, presterilized, filter 10 µL
ShaftGard in Green-Pak SpaceSaver
17005085 GPS-10G 960 ShaftGard tips in 10 refills 10 µL
17005084 GPS-10GS 960 ShaftGard tips in 10 refills, presterilized 10 µL
17014381 GPS-10GLR 960 Low retention ShaftGard tips in 10 refills 10 µL
17014383 GPS-10GSLR 960 Low retention ShaftGard tips in 10 refills, presterilized 10 µL
ShaftGard in Green-Pak
17002416 GP-10GF 960 ShaftGard tips in 10 refills, presterilized, filter 10 µL
Bulk tips
17001123 RC-10G 1000 ShaftGard tips in bags 10 µL
17014396 RC-10GLR 1000 Low retention ShaftGard tips in bags 10 µL
ShaftGard in TerraRack
17014972 TR-10GS 960 ShaftGard tips in 10 racks, presterilized 10 µL
17014973 TR-10GF 960 ShaftGard tips in 10 racks, presterilized, filter 10 µL
Empty racks for refills
17001862 GPR-10G Color coded empty racks for ShaftGard 10 µL tips, red, pkg of 10
Universal Tips for Rainin, Pipetman® & all brands with universal shaf t design
50
Special Application Tips
Rainin macro tips dispense large volume samples with high accuracy and precision. In fact, in the larger volumes, they offer better accuracy and precision than glass pipet controllers. Our large volume tips are made from dye-free virgin polypropylene. Filters are also available for the end of the pipette shaft.
Large Volume TipsMacro-volume Pipetting
• Graduation marks
Available for the 20 mL LTS tips.
Rainin Certified Guaranteed to produce accurate and precise measurements when used with Rainin pipettes and in accordance with their instruction manuals.BioClean No RNase, DNase, DNA, pyrogens, PCR inhibitors or ATP – guaranteed!
51
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
ORDER No. DESCRIPTION MAX. CAPACITY
Large volume tips in removable-cover RT-racks
17002926 RT-L2000 480 LTS tips in 8 racks 2000 µL
17002924 RT-L2000S 480 LTS tips in 8 racks, presterilized 2000 µL
17002923 RT-L2000F 480 LTS tips in 8 racks, presterilized, filter 2000 µL
17002937 RT-L5000 192 LTS tips in 8 racks 5000 µL
17002936 RT-L5000S 192 LTS tips in 8 racks, presterilized 5000 µL
Bulk tips
17001130 RC-L2000 1000 LTS tips in bags 2000 µL
17001133 RC-L5000 1000 LTS tips in bags 5000 µL
17001119 RC-L10ML 200 LTS tips in bags 10 mL
17005940 RC-L10MLS 75 LTS tips in bags, presterilized, indiv. wrapped 10 mL
17001131 RC-L20ML 100 LTS tips in bags 20 mL
17005941 RC-L20MLS 50 LTS tips in bags, presterilized, indiv. wrapped 20 mL
LTS Tips for Rainin Pipet tes with the LiteTouch System
Universal Tips for Rainin, Pipetman® & all brands with universal shaf t design
ORDER No. DESCRIPTION MAX. CAPACITY
Large volume tips in removable-cover RT-racks
17002911 RT-2000 480 tips in 8 racks 2000 µL
17002910 RT-2000S 480 tips in 8 racks, presterilized 2000 µL
17002909 RT-2000F 480 tips in 8 racks , presterilized, filter 2000 µL
17002919 RT-5000 192 tips in 8 racks 5000 µL
17002918 RT-5000S 192 tips in 8 racks, presterilized 5000 µL
Bulk tips
17001125 RC-2000 1000 tips in bags 2000 µL
17001126 RC-2500 1000 tips in bags 2500 µL
17001117 RC-5000 1000 tips in bags 5000 µL
17001122 RC-10ML 200 tips in bags 10 mL
17005939 RC-10MLS 75 tips in bags, presterilized, indiv. wrapped 10 mL
52
Pipette Tips
Extended length tips make accurate aspirating and dispensing possible within deep, narrow vessels and in other applications that require longer reach. Although longer and narrower than standard pipette tips, extended length tips have no discernible effect upon pipetting accuracy.
Extended Length TipsPipette into Tall Narrow Tubes
• Narrow diameter
These tips will pass through 8 mm ID penetrable septa, such as on specimen collection kits.
• 102 mm long
Rainin extended length LTS tips reach to the bottom of blocks, tall vials, flasks, 100 mm tubes, etc.
ORDER No. DESCRIPTION MAX. CAPACITY
Extended length (102 mm long) tips in removable-cover RT-racks17008887 RT-L200XF 768 LTS tips in 8 racks, presterilized, filter 200 µL
17008814 RT-L250X 768 LTS tips in 8 racks 200 µL
17008815 RT-L250XS 768 LTS tips in 8 racks, presterilized 200 µL
17008817 RT-L1000X 768 LTS tips in 8 racks 1000 µL
17008818 RT-L1000XS 768 LTS tips in 8 racks, presterilized 1000 µL
17008819 RT-L1000XF 768 LTS tips in 8 racks, presterilized, filter 1000 µL
LTS Tips for Rainin Pipet tes with the LiteTouch System
53
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
Gel-Well tips are ideal for manipulating samples within exceptionally narrow vessels or openings.
Gel-Well TipsGreat for Narrow Gel Wells
• Optional tip ends
The end of the Gel-Well tip comes tapered or flattened to create very narrow orifices. Round orifice ends have an OD size of 0.57 mm; flat orifice ends are slightly narrower with an OD size of 0.17 mm and 0.37 mm.
ORDER No. DESCRIPTION MAX. CAPACITY
Gel-Well™ gel-loading tips17002375 GT-10-2 200 gel-layering tips in 1 rack, flat 0.17 mm orifice 10 µL
17002377 GT-10-4 200 gel-layering tips in 1 rack, flat 0.37 mm orifice 10 µL
17002380 GT-10-6 200 gel-layering tips in 1 rack, round 0.57 mm orifice 10 µL
17002376 GT-250-2 200 gel-layering tips in 1 rack, flat 0.17 mm orifice 250 µL
17002378 GT-250-4 200 gel-layering tips in 1 rack, flat 0.37 mm orifice 250 µL
17002379 GT-250-6 200 gel-layering tips in 1 rack, round 0.57 mm orifice 250 µL
Universal Tips for Rainin, Pipetman® & all brands with universal shaf t design
Autoclavable Cycles up to 15 minutes at 1 bar and 121°C.
• Flexible and ultrathin
The flexible, ultrathin microcapillary tip provides great precision for sample loading in applications such as DNA sequencing and protein electrophoresis. For example: layering samples onto thin (<1 mm) slab gels.
54
Greener TodayPursuing an Even Greener Tomorrow
Reducing, Reusing and RecyclingWe optimize each product for manufacturing to reduce scrap. What scrap there is, we re-grind and mold into other products where precision and absolute purity are less critical. For example, scrap polypropylene and polyethylene is carefully collected, ground and remanufactured into tip trays.
Rainin‘s innovative packaging solutions not only reuse scrap and recycled plastics – they also reduce overall packaging waste by up to 85%!
Our shipping boxes are made of natural brown, easily-degradable cardboard. Most of these boxes contain 59% recycle paper fiber, nearly half of which comes from post-consumer waste.
Greening productionBy installing computer-controlled LED lighting, robotic systems and energy efficient molding machines, we have significantly lowered our energy use in our state-of-the-art manufacturing facility. Our energy provider, Pacific Gas & Electric, recognized Rainin for having reduced greenhouse gas emissions by 224 tons annually.
In our business operations, shifting to web-based technologies to gather and distribute information has dramatically reduced our use of printed forms and marketing collateral. And the hard copy literature we do use is now printed “on demand,“ to minimize waste and spoilage. And by partnering with our global cloud-based print provider, HubCast, actual printing is done in the town or region where they are needed. Find out more at mt.com/rainin-green
55
Rainin
www.mt.com/rainin | Rainin, a METTLER TOLEDO Company
Rainin and its parent company, METTLER TOLEDO, are committed to producing the highest quality products in the most sustainable and environmentally-sensitive manner possible. From production and packaging to marketing and distribution, we are actively applying sustainable technologies and techniques today, and are committed to finding new ways to further minimize our environmental footprint in the future.
For more informationwww.mt.com/rainin
ISO 9001 quality certification Internet: http://www.mt.com/rainin Worldwide service
RAININ TRADEMARKS: RAININ, LTS, LiteTouch, TerraRack, BioClean, Green-Pak, SpaceSaver, StableStak, StableRak, ShaftGard, Gel-Well, FinePoint, Pipet-Lite, XLS, Pipetting 360° and the 360° logo are trademarks of Rainin Instrument, LLC.
THIRD PARTY TRADEMARKS: Pipetman, Gilson, Eppendorf, Sartorious, BioHit, ThermoFisher, Finnpipette and VWR are trademarks of their respective owners.
©2015 Rainin Instrument, LLC. Printed in USA
Get Tips That FitAll Major Pipette BrandsUse our new online Tip Finder to find the right Rainin BioClean tip for your Rainin, Eppendorf, Gilson, ThermoFisher and Sartorius/BioHit pipettes. Find out more at www.mt.com/TipFinder
Rainin, Pipetting 360°, the 360° Logo are registered trademarks of Rainin Instrument, LLC. FrameStar is a registered trademark of 4titude Ltd. FrameStar plates are covered by one or more of the following U.S. patents or their foreign counterparts, owned by Eppendorf AG: US Patent Nos. 7,347,977 and 6,340,589.
Quality certificate ISO9001Environment certificate ISO14001
Subject to technical changes© 01/2016 Mettler-Toledo AGPrinted in Switzerland 17700857Marketing RAININ EuropeGlobal MarCom Switzerland
neutralPrinted Matter
No. 01-13-488351 – www.myclimate.org© myclimate – The Climate Protection Partnership
Recommended