View
225
Download
1
Category
Tags:
Preview:
DESCRIPTION
2011 Recessed MR16 and GX10 Brochure
Citation preview
RECESSEDLUMINAIRESMETAL HALIDE & LOW VOLTAGE COLLECTION
Ambience, mood, aesthetic appeal – like beauty itself, they are in the eye of the beholder. And in the realm of the senses. At Dasal we understand the subtleties. How the colours of light can enhance an exacting design. How the placement of light can dramatize, accentuate and flatter. How each one of an infinity of lighting options is able to perform, function, comfort and complement.
With the Dasal Recessed Luminaire Collection we offer practical choice, design innovation, purpose-built solutions, beauty, longevity, safety and consistent customer satisfaction.
Square Series
Geometry meets symmetry and simplicity. Dasal’s Square Series offers the interior designer or specifier a whole new set of angles on illumination and presentation.
With a variety of clusters, sizes and finishes, Dasal’s square and rectangular luminaires offer deep regressed lamps, all individually adjustable and capable of accepting a multitude of lamp accessories.
1. Quadra 12. Quadra 23. Quadra 34. Nemo5. Miro6. Quadra Pinhole
2 3 4 5 6
RECESSEDLUMINAIRESSQUARE SERIES
D A S A L I N D U S T R I E S . C O M
1
3
Trimless Series
Where recessed lighting shows how to recede gracefully, providing modern, minimalist clean lines in any interior context. Primarily intended for new construction where installation is unhindered by existing structures or ceiling materials.
The Trimless Series can be ordered for decorative purposes, for application-specific functions such as wall grazing and wall washing, or wet location trims which can be used for showers orsteam rooms.
1. Starlite2. Aqua3. Aurora4. Coral (Clear/Chrome)5. Conus (Frosted)6. Pivot7. Deep Aurora8. Flare Wallwash 9. Keyhole10. Picolo11. Pinhole
2 3 4 5 6
7 8 9 10 11
D A S A L I N D U S T R I E S . C O M
RECESSEDLUMINAIRESTRIMLESS SERIES
5
1
D A S A L I N D U S T R I E S . C O M
Dasal Trimless Housings available in various styles and types. Housingcomes complete with die cast internal threaded trimless ring attached. High Wattage housing shown here.
Plasterboard applied over housing.Housing hole serves as hole cutout template. (Plaster board supplied by others)
Die cast threaded outer trimless ring simply threads into internal trimless ring in housing. Ridges under outer trimless ring flange help provide a grip into plasterboard.
Paper ring gasket supplied to prevent plaster from cracking.
Thin layer of plaster feathered outto cover outer trimless mud ring and paper gasket. A finish cover of paintover plaster completes the install &blends the trimless ring and ceilinginto one.
The final step. Choose any one of Dasal trimless trims. Snap the Dasal trim into the opening to complete the elegant trimless appearance.
Cutaway View of Trimless Housing
7
Classic Series
The Dasal Classic Series reinvents the perfect circle in a family of decorative trims that each fulfill a specific integral purpose or décor objective. Choose a classic Dasal design for wall grazing or wall washing. Or a moisture-proof model for showers, bathrooms or steam rooms.
Add taste to your kitchen. Put your cooking in the spotlight. Or dim the lights for intimate dining. The Classic Series includes the popular Aurora and Deep Aurora trims with a variety of anodized reflector finishes.
For a more focused, adjustable light beam, there’s the ultra-regressed, one-inch aperture of the Pinhole model. The Dasal Classic Series provides an exceptionally well-rounded range of functional and beautiful lighting choices for virtually any living area.
1. Aurora2. Aqua3. Conus4. Coral5. Deep Aurora6. Demi7. Eclipse8. Flare WallWash9. Keyhole10. Lensed Picolo 11. Pivot12. Siris13. Split 14. Starlite15. Sunburst16. Pinhole
16
2 3 4 5 6
7 8 9 10 11
12 13 14 15
RECESSEDLUMINAIRESCLASSIC SERIES
D A S A L I N D U S T R I E S . C O M
1
9
16
“As with good architecture, good lighting, illuminates, clarifies, stimulates.”
Cesar Portela, Architect
CMH Lamp Information
-Long Life• Constant Color• Good Color Rendering• Robust Twist & Lock Base Design• Superior Beam Control• Up To 56 Lumens Per Watt• Short Re-strike and Warm-up• Reduced UV• Lower Overall System Power Consumption
CRI BEAM ANGLE
PHYSICAL CHARACTERISTICS
RATED LIFE
12,000 Hours10,000 Hours12,000 Hours
WATTAGE BASE TYPE
20W35W35W
GX10 Twist & LockGX10 Twist & LockGX10 Twist & Lock
INITIAL LUMENS COLOUR TEMP.
1,0002,2002,200
3,000K3,000K4,000K
819092
12, 25, 4012, 25, 4012, 25, 40
Dimensions
A. 2 1⁄8” (54.5mm)B. 2” (51.0mm)C. 1/8” (3.5mm)D. 9/16” (14.0mm)
C
A
D
B
D
B
C
A
A. 1 ” (44.5mm)
B. 1 ” (38.1mm)
C. 2” (50.8mm)
D. ” (6.4mm)
3/4
1/2
1/4
A. 2 ” (54.5mm)
B. 2” (51.0mm)
C. ” (3.5mm)
D. ” (14.0mm)
1/8
1/8
9/16
RECESSEDLUMINAIRESCMH LAMP INFORMATION
D A S A L I N D U S T R I E S . C O M12
NON INSULATED CEILING HOUSING
• Rated for Air Handling Plenums
• Thermal Overload protection
• 120 / 277 Volt Electronic HID Ballast
• Also available for trimless
• 10 7⁄8”W x 13 3⁄4”L x 4 1⁄2”D
10 7/8”W x 13 ¾”L x 4 ½”D
Max 20 or 35 Watt (must be specified)
4 1⁄2” Round Hole Cutout
3 7⁄8” Square Hole Cutout
REMODEL HOUSING
• Rated for Non Insulated Ceilings
• Rated for Air Handling Plenums
• Thermal Overload protection
• 120 / 277 Volt Electronic HID Ballast
• Unique install clip accommodates ceiling thickness to 1 ½”
• 4 1⁄2”W x 10 3⁄8”L x 5 1⁄4”D
Max 20 or 35 Watt (must be specified)
4 1⁄2” Round Hole Cutout
4” Square Hole Cutout
RECESSEDLUMINAIRESCMH LAMP HOUSING OPTIONS
D A S A L I N D U S T R I E S . C O M 15
CHICAGO PLENUM HOUSING
• Rated for Non Insulated Chicago Plenum Ceilings• CCEA approved (City of Chicago Environmental Air)
• Thermal Overload protection
• 120 / 277 Volt Electronic HID Ballast
• Also available for trimless
• 10 7⁄8”W x 13 3⁄4”L x 4 1⁄2”D
Max 20 or 35 Watt (must be specified)
4 1⁄2” Round Hole Cutout
3 7⁄8” Square Hole Cutout
CONCRETE POUR HOUSING
• Rated for Concrete Pour
• 18 gauge galvanized steel construction
• 5 K.O. around junction box for easy wire entry
• Hinged lid for easy access to wiring compartment
• 120 / 277 Volt Electronic HID Ballast
• Extension collar available (option)
• 12”W x 18”L x 5 7⁄8”D
Max 20 or 35 Watt (must be specified)
4 ½” Round Hole Cutout
3 7⁄8” Square Hole Cutout
MR16 LV Lamp Information
-Bright crisp light throughout lamp life-Lower Energy Consumption(Based on IR Type Lamps)-Multiple Beam Angles-Long Life
BEAM ANGLE
PHYSICAL CHARACTERISTICS
RATED LIFE
5,000 Hours5,000 Hours5,000 Hours
WATTAGE BASE TYPE
20W37W50W
GX 5.3GX 5.3GX 5.3
INITIAL LUMENS COLOUR TEMP.
1,0001,7002,200
3,000K3,000K4,000K
10, 25, 35, 6010, 25, 35, 6010, 25, 35, 60
Dimensions
A. 1 3⁄4” (44.5mm)B. 1 1⁄2” (38.1mm)C. 2” (50.8mm)D. 1/4” (6.4mm)
RECESSEDLUMINAIRESMR16 LV LAMP INFORMATION
HIGH QUALITY LIGHT DIAGRAM REQUIRED
D A S A L I N D U S T R I E S . C O M16
C
A
D
B
D
B
C
A
A. 1 ” (44.5mm)
B. 1 ” (38.1mm)
C. 2” (50.8mm)
D. ” (6.4mm)
3/4
1/2
1/4
A. 2 ” (54.5mm)
B. 2” (51.0mm)
C. ” (3.5mm)
D. ” (14.0mm)
1/8
1/8
9/16
RECESSEDLUMINAIRESMR16 LV LAMP HOUSING OPTIONS
NON INSULATED CEILING HOUSING
• Rated for Air Handling Plenums
• Thermal Overload protection
• Magnetic or Electronic transformer
• Magnetic Torroidal transformer available (deep version only)
• 120V, 277V & 347 Volt
• Also available for trimless
• Housing depth 4 1⁄2” for Deep Aurora trim only
• 10 1⁄2”W x 7 3⁄4”L x 3 1⁄2”D
Max 50 Watt
4 1⁄2” Round Hole Cutout
3 7⁄8” Square Hole Cutout
HIGH WATT & CHICAGO PLENUM HOUSING
High Wattage
• Rated for Non Insulated Ceilings
• Rated for Air Handling Plenums
• Thermal Overload protection
• Rated for through wire applications
• Magnetic or Electronic transformer
• Magnetic Torroidal transformer available (deep version only)
• 120V, & 277 Volt
• Also available for trimless
• Housing depth 4 1⁄2” for Deep Aurora trim only
• 10 7⁄8”W x 13 3⁄4”L x 3 1⁄2”D
Chicago Plenum
• Rated for Non Insulated Chicago Plenum Ceilings
• CCEA approved (City of Chicago Environmental Air)
• Thermal Overload protection
• Magnetic or Electronic transformer
• Magnetic Torroidal transformer available
• 120V, & 277 Volt
• Also available for trimless
• 10 7⁄8”W x 13 3⁄4”L x 3 1⁄2”D
Max 75 Watt
4 1⁄2” Round Hole Cutout
3 7⁄8” Square Hole Cutout
3 7⁄8” x 7 7⁄8” Rect Hole Cutout(Quadra 2)*Max 2 x 50 Watt
3 7⁄8” x 10 3⁄4” Rect Hole Cutout(Quadra 3)*Max 3 x 37 Watt
SHALLOW INSULATED CEILING HOUSING
• Designed for ceiling as low as 6”
• Approved for direct burial in insulation
• Rated for Air Handling Plenums
• Integral Torroidal transformer
• 120V, & 277 Volt
• Also available for trimless
• 8 1⁄2”W x 22 1⁄2”L x 5 7⁄8”D
Max 50 Watt
4 1⁄2” Round Hole Cutout
3 7⁄8” Square Hole Cutout
CONCRETE POUR HOUSING
• Rated for Concrete Pour
• 18 gauge galvanized steel construction
• 5 K.O. around junction box for easy wire entry
• Hinged lid for easy access to wiring compartment
• Integral Magnetic or Electronic transformer
• 120V, 277V & 347 Volt
• Extension collar available (option)
• 12”W x 18”L x 5 7⁄8”D
Max 50 Watt (magnetic) Max 37 Watt (electronic)
4 1⁄2” Round Hole Cutout
3 7⁄8” Square Hole Cutout
INSULATED CEILING HOUSING
• Approved for direct burial in insulation
• Air Tight Approved to ASTM E283-91
• Rated for Air Handling Plenums
• Thermal Overload protection
• Magnetic or Electronic transformer
• Magnetic Torroidal transformer available
• 120V, 277V & 347 Volt
• Also available for trimless
• 10 7⁄8”W x 13 3⁄4”L x 7”D
Max 75 Watt
4 1⁄2” Round Hole Cutout
3 7⁄8” Square Hole Cutout
REMODEL HOUSING
• Rated for Non Insulated Ceilings
• Rated for Air Handling Plenums
• Thermal Overload protection
• Magnetic or Electronic transformer
• 120V, 277V & 347 Volt
• Unique install clip accommodates ceiling thickness to 1 1⁄2”
• 4 1⁄2”W x 13 1⁄8”L x 5 1⁄4”D
Max 50 Watt
4 1⁄2” Round Hole Cutout
4” Square Hole Cutout
Suite 804 | 1515 Broadway Street Port Coquitlam BC Canada | V3C 6M2Tel: 604 464-5644 | Fax: 604 464-0888
dasalindustries.com
ARCHITECTURAL CYLINDERSRECESSED LUMINAIRESMETAL HALIDE & LOW VOLTAGE COLLECTIONXICATO LED LUMINAIRESLED LUMINAIRESMATRIX LUMINAIRESMILLWORK LUMINAIRESWALL LUMINAIRES
FOR MORE INFORMATION PLEASE CONTACT US TOLL FREE:
1.800.464.9544
Recommended