View
224
Download
0
Category
Preview:
Citation preview
TOOLBOOKLET
P/N 219 200 106
®
www.SeaDooManuals.net
www.SeaDooManuals.net
Watercraft®
Litho’d in Canada (SSI-9701 PRM)®*Trademarks of Bombardier Inc.©1996 Bombardier Inc. All rights reserved.
219 200 106 PAGE 1 OF 19
SERVICE TOOLSThis is a list of tools to properly service Sea-Doo watercraft. The list includes both the mandatory toolsand the optional tools that are ordered separately. The list of Service Products, both mandatory andoptional, are not part of any kit and must all be ordered separately. If you need to replace or add to yourtool inventory, these items can be ordered through your regular parts channels.NOTE: The numbers outlined in black (example: ) are reference numbers to tools from other divi-sions (Ski-Doo Snowmobiles and/or Sea-Doo Jet Boats). Matching reference numbers indicate the sametool is being used on both products, even if the part numbers are different.
1
FO
R A
PP
RO
VA
L O
NLY
SEA-DOO TOOL BOOKLET
www.SeaDooManuals.net
PAGE 2 OF 19 219 200 106
ENGINE — MANDATORY SERVICE TOOLS
Degree wheelP/N 295 000 007
A00B334
APPLICATIONAll models.
Rubber padP/N 295 000 101
F01B0J4
APPLICATIONAll models.
Bearing pusherP/N 290 876 500
A00B2J4
APPLICATIONAll engines except 787.
1
360 350 340330
320
310300
290280
270260
250240
230220
210200190180170160
150
140
130
120
110
100
9080
7060
5040 30 20 10
10 2 030
40
5060
7080
90100
110120
130140
150160170180190200210
220
23024
025
026
027
02 8
02 9
030
0310
320330
340 3 50 36 0
547
12
F01D884
1) PullerP/N 290 876 298
2) Protective cap(both ends)P/N 290 876 557
3) Ring (both ends)P/N 290 977 490
4) Ring halves (PTO)P/N 290 977 475 (2)
5) Distance ring (MAG)P/N 290 876 569
6) Ring halves (MAG)P/N 290 276 025 (2)
7) Screw M8 x 40P/N 290 840 681 (2)
8) Screw M8 x 70P/N 290 841 201 (2)
APPLICATIONAll models.
MAG side PTO side
8
1
52
3
4
46
8 7 7
200
554
555
556
557
558
559
560
Piston circlip installerA) P/N 295 000 077
B) P/N 290 877 016
A01B1P4
APPLICATION
A) 587 engine.B) 657, 717 and 787 engines.
PusherP/N 290 876 605
A00C0Y4
APPLICATIONAll engines except 787.
Bearing pusherP/N 290 876 501
F00B074
APPLICATION787 engines.
202
548
Pistoncirclip
229
www.SeaDooManuals.net
219 200 106 PAGE 3 OF 19
ENGINE (continued) — MANDATORY SERVICE TOOLS
Digital multimeterP/N 529 022 000
F01B1O4
APPLICATIONAll models.
242
NEW
PullerP/N 295 000 106
A00C1A4
Puller plateP/N 290 876 080
A00C1R4
Extension handleP/N 295 000 125
F01D164
Screw M8 x 35 (3)P/N 290 841 591
F00A094
Sleeve (3)P/N 290 847 220
F00A0A4
APPLICATIONAll engines except 787.
5
549
550
551
552
PTO flywheelremover/installerP/N 295 000 001
F01J0T4
APPLICATION587, 657(X), 717 engines (except HX 5881/5882).
NOTE: This tool is also usedfor the impeller.
PullerP/N 290 876 488
F01B0I4
APPLICATIONAll engines.
A) Alignment tool supportP/N 295 000 090
B) Alignment shaftP/N 295 000 093
C) Alignment shaftP/N 295 000 141
D) AdaptorP/N 295 000 157
F01L2R4
APPLICATION
A) All models.B) All models except HX and XP
5662.C) HX.D) HX (except 5880) and XP 5662.
553
562
2 1
563
571
570
776
www.SeaDooManuals.net
PAGE 4 OF 19 219 200 106
ENGINE (continued) — MANDATORY SERVICE TOOLS
Piston pin pullerA) P/N 290 877 092
B) P/N 295 000 105
F01B0V4
APPLICATION
A) 657, 717 and 787 enginesReplacement parts:1) Locating sleeve
P/N 290 877 1812) Expansion sleeve
P/N 290 877 0413) Extracting nut
P/N 290 877 155B) 587 engine
Replacement parts:1) Locating sleeve
P/N 295 000 118 (2)2) Expansion sleeve
P/N 295 000 117 (2)3) Extracting nut (2)
P/N 295 000 115
MPEM programmerP/N 295 000 127
F01B254
APPLICATIONModels equipped with the DESS.
566
565
1 2
3
772
771
770
769
768
767
567
Flywheel extractorP/N 295 000 156
F00B044
APPLICATIONHX (except 5880) and models with a 787 engine.
Engine leak tester kitP/N 295 500 352
F01B2Q5
APPLICATIONAll models.
Ring gear puller toolP/N 420 976 235
F01B294
APPLICATION787 engine.
777
NEW
778
NEW
569
Ring gear blocking toolP/N 295 000 155
F01B264
APPLICATION787 engine.
568
NEW
www.SeaDooManuals.net
219 200 106 PAGE 5 OF 19
COOLING/FUEL/OIL SYSTEMS — MANDATORY SERVICE TOOLS
Hose pincherP/N 295 000 076
A01B2I4
APPLICATIONAll models.
Gear holderP/N 290 277 905
A00C164
APPLICATIONAll engines except 787.
PliersP/N 295 000 070
Oetiker 1099
F01D174
APPLICATIONAll models.
2
235
601
PliersP/N 295 000 054
Caillau
F01B1T4
APPLICATIONAll models.
NOTE: This tool is also used forthe propulsion system.
Coupler hoseP/N 295 500 258
41 cm (16 in)
F01E0Z4
APPLICATIONAll models without a jet pump support.
606
752
www.SeaDooManuals.net
PAGE 6 OF 19 219 200 106
PROPULSION SYSTEM — MANDATORY SERVICE TOOLS
Impeller remover/installerP/N 295 000 001
F01J0T4
APPLICATIONAll models.
NOTE: This tool is also used forthe PTO flywheel.
PliersP/N 295 000 069
Oetiker 1090
F01D184
APPLICATIONAll models.
Impeller shaft holderP/N 295 000 082
F01B0W4
APPLICATIONAll models.
553
602
603
Bearing/seal installerP/N 295 000 107
F01J4K4
APPLICATIONAll models.
Impeller shaft guideP/N 295 000 002
F01J1O4
APPLICATIONAll models.
PliersP/N 295 000 054
Caillau
F01B1T4
APPLICATIONAll models.
NOTE: This tool is also used forthe fuel system.
604
605
606
VTS toolP/N 295 000 133
F01B2P4
APPLICATIONAll models with a rear mounted VTS motor.
607
www.SeaDooManuals.net
219 200 106 PAGE 7 OF 19
OPTIONAL SERVICE TOOLS 0ENGINE
Ring compressorA) P/N 290 876 972B) P/N 295 000 112C) P/N 290 876 979
A01B1T4
APPLICATION
A) 587 engine (76 mm).B) 657(X) engines (78 mm).C) 717 and 787 engines (82 mm).
Coil centering toolP/N 290 876 922
A01B1V4
APPLICATIONAll engines except 787.
Cylinder aligning toolP/N 290 876 904
A00B084
APPLICATIONAll engines except 787.
207
751
766
209
220
Stroboscopic timing lightP/N 529 031 900
A00B4F4
APPLICATIONAll models.
Dial indicator (TDC gauge)P/N 295 000 143
A00B4E4
APPLICATIONAll models.
Distance gaugeA) P/N 290 876 826B) P/N 290 876 827C) P/N 290 876 828
F01B0H4
APPLICATION
A) 587 and 657 engines.B) 717 engines.C) 787 engine.
225
NEW
230
779
760
561
Digital/induction typetachometerP/N 295 000 100
F01B1G4
APPLICATIONAll models.
Bombardier ignition testerP/N 295 000 008
A00C1K4
APPLICATIONAll models.
Timing mark pointerP/N 295 000 130
F01B2O4
APPLICATIONAll engines except 787.
237
236
0
10
20
30
4050
90
80
70
60
100
Low High
Indicator
IGNITION TESTER
Reset
774
www.SeaDooManuals.net
PAGE 8 OF 19 219 200 106
ENGINE (continued) — OPTIONAL SERVICE TOOLS
Timing mark pointerP/N 295 000 135
F01H544
APPLICATION787 engine.
Oil seal pusherP/N 290 877 740
F01B2C4
APPLICATION787 engine.
Ring halves and ringP/N 290 876 330(halves) (2)P/N 290 977 480 (ring)
F01B2D4
APPLICATION787 engine.
754
759
761
762
Engine lifting deviceNot sold by BombardierDo it yourselfRefer to Shop Manual section03-03
F01D0A4
APPLICATIONAll models except 787.
Feeler gauge 45°Not sold by Bombardier
Snap-onFB 300 A
F01B1K4
APPLICATIONAll models.
Terminal removerNot sold by Bombardier
Snap-onTT 600-4
F01B1J4
APPLICATIONAll models.
Slide hammer pullerNot sold by Bombardier
Snap-on: Handle CJ93-1Hammer CJ125-6Claws CJ93-4
F01J0Z4
APPLICATIONAll models.
NOTE: This tool is also used topull out impeller shaft seal.
Protective matP/N 295 000 128
F02B0A4
APPLICATIONAll models.
889
www.SeaDooManuals.net
219 200 106 PAGE 9 OF 19
ENGINE (continued) — OPTIONAL SERVICE TOOLS
Safety lanyard switch toolP/N 295 000 121
F01B244
APPLICATIONModels equipped with the DESS.
A) Four-pin magneto harnessP/N 295 000 131
B) Six-pin magneto harnessP/N 295 000 136
F01B284
APPLICATION
A) 587, 657 and 717,1995 and newer.
B) 787 engine.
Rotary valve shaft pusherP/N 290 876 609
F01B2B4
APPLICATION787 engine.
775
763
755
757
HandleP/N 290 877 650
A00C3V4
APPLICATION787 engine.
Exhaust outlet toolP/N 295 000 132
F01B2A4
APPLICATIONExhaust nut on transom.
Gear/bearing pullerP/N 290 877 665
F04B034
APPLICATION787 engine.
758
831
765
Crankshaft protectorP/N 420 876 552
F00B034
APPLICATIONFor use with pullers.
764
www.SeaDooManuals.net
PAGE 10 OF 19 219 200 106
COOLING/FUEL/OIL SYSTEMS — OPTIONAL SERVICE TOOLS
Pump gauge tester(carburetor)P/N 295 000 114
F01B0X4
APPLICATIONAll models.
ScrewdriverNot sold by Bombardier
Snap-onSDD-143
F01B1P4
APPLICATIONAll models.
Lighted adjustable mirrorNot sold by Bombardier
Snap-on50101
F01B1I4
APPLICATIONAll models.
826
35
4
3252
151
5
60
50
40
30
20
10
Hose pincherP/N 529 032 500
(TYPICAL)
F01B234
APPLICATIONAll engines.
Spring compressorP/N 529 027 100
A01B4O4
APPLICATIONHX and XP (5662).
Suspension adjustmentwrenchP/N 529 012 200
A25A014
APPLICATIONHX and XP (5662).
773
NEW
833
Flush kitP/N 295 500 068
F01E014
APPLICATIONModels prior to 1992.
Flexible spout (oil)P/N 414 837 300
F04B044
APPLICATIONAll models.
564
834
www.SeaDooManuals.net
219 200 106 PAGE 11 OF 19
PROPULSION SYSTEM — OPTIONAL SERVICE TOOLS
FittingP/N 295 000 086
F01B0Z4
APPLICATIONAll models.
Slide hammer pullerNot sold by Bombardier
Snap-on: Handle CJ93-1
Hammer CJ125-6
Claws CJ93-4
F01J0Z4
APPLICATIONAll models.
NOTE: This tool is also used toremove rotary valve shaft bearing.
HacksawNot sold by Bombardier
Snap-onHS3
F01B1M4
APPLICATIONAll models.
828 Machinist’s squareNot sold by Bombardier
Snap-onPMF 122
F02B064
APPLICATIONModels equipped with reverse (except GTI 5641 and GTX 5640/5642).
Fitting removerNot sold by BombardierDo it yourselfRefer to Shop Manual sub-section08-02
F01J2R4
APPLICATIONAll models.
Steering cable toolP/N 295 000 145
F01B2P4
APPLICATIONHX model.
Deep socket14 mm(9/16 in)
780
Jet pump bearing removerP/N 295 000 144
F01J114
APPLICATIONAll models.
Impeller housingremoverP/N 295 000 113
F01L2O4
APPLICATIONModels without a jet pump support.
781
829
www.SeaDooManuals.net
PAGE 12 OF 19 219 200 106
WATERCRAFT HANDLING — OPTIONAL SERVICE TOOLS
Dolly (with wheels)P/N 295 000 126
F01B014
Beach wheels(set of 2 wheels)P/N 295 000 005
F01B074
APPLICATIONDolly.
Tie-down with ratchet3.60 m (12 ft) longP/N 295 100 011
APPLICATIONAll models.
876
877
885
Lift kitA) P/N 295 100 012
B) P/N 295 100 013
F01B1N4
APPLICATION
A) SP and GS series, XP model(except 5662).
B) GT models.
Tie-down1.50 m (5 ft) longP/N 295 100 010
F00B014
APPLICATIONAll models.
879
880
884
www.SeaDooManuals.net
219 200 106 PAGE 13 OF 19
SERVICE PRODUCTS 0NOTE: The numbers outlined in black (example: ) are reference to product numbers from other divi-sions (Ski-Doo Snowmobiles and/or Sea-Doo Jet Boats). Matching reference numbers indicate the sameproduct is being used, even if the part numbers are different.Loctite® is a trademark of Loctite™ Corporation.Dow Corning® is a trademark of Dow Corning Corporation.
1
Medium strengththreadlockerP/N 293 800 015
Loctite 242 (blue)(10 mL)
A00B324
APPLICATIONCylinder head screws.Tuned pipe nut and screws.Engine rubber mount screws.Armature plate screws.Magneto flywheel/crankshaft.Carburetor mount nuts/screws.Magneto coil screws.Impeller housing cover screws.Venturi/impeller housing screws.Intake grate screws.Engine support screws.Impeller housing/hull nuts.Steering nozzle screws.Reverse gate screws.
154
LOCTITELOCTITELOCTITE®®®
REMOVABLETHREADLOCKER 242
High strengththreadlockerP/N 293 800 005
Loctite 271 (red)(10 mL)
A00B2U4
APPLICATIONImpeller shaft thread.
High temperaturethreadlockerP/N 290 899 788
Loctite 648 (green)(5 g)
A00B3D4
APPLICATIONCrankcase/plug at end of rotary valve shaft.Magneto/ring gear.
155
LOCTITELOCTITELOCTITE®®®
271Adhesive Sealant
359
High temperature retainingcompoundP/N 293 800 039
Loctite 642(50 mL)
F00B024
APPLICATIONPress fit parts on crankshafts.
Retaining compoundP/N 413 703 100
Loctite RC/609 (green)(10 mL)
A00B2S4
APPLICATIONUsed for retaining bushings, bearings in slightly worn housing or on shaft.
155
RETAINING COMPOUND642
NET 1.69 FL .OZ. (50 ml)
LOCTITE
ASSURE
151
LOCTITELOCTITELOCTITE®®®
RC/609
www.SeaDooManuals.net
PAGE 14 OF 19 219 200 106
SERVICE PRODUCTS (continued)
General purpose instantadhesiveP/N 293 800 021
Loctite 495
A00B2V4
APPLICATIONRubber to metal bonding and most hard plastic.
Gasket stripperP/N 295 000 110
(500 mL)
F01B1W4
APPLICATIONMating surfaces of cylinders and crankcase.Crankcase halves.
373
935
WARNINGEXTREMELY FLAMMABLE
VAPOR HARMFULPOISON
GASKET STRIPPER295 000 110
500 ml
BOMBARDIER
SolventP/N 293 800 019
Loctite SafetySolvent 755
(12 oz)
A00B3M4
APPLICATIONImpeller shaft threads.Drive shaft splines.Impeller threads and splines.
Primer for gasket eliminatorP/N 293 800 041
Loctite764
A00B3N4
APPLICATIONCrankcase halves mating surfaces.Impeller shaft thread.Venturi/impeller housing mating surfaces.
157
158
Gasket eliminatorP/N 293 800 007
Loctite 515(50 mL)
A00B2T4
APPLICATIONCylinder sleeve/O-ring groove.Crankcase halves mating surface.Crankcase screws.
Gasket eliminatorP/N 293 800 038
Loctite 518(50 mL)
F01B124
APPLICATIONImpeller housing cover.Venturi/impeller housing.Impeller shaft seal.
Pipe sealantA) P/N 293 800 018B) P/N 293 800 013
A) Loctite 592 B) Loctite 567A) (50 mL) B) (250 mL)
A00B2W4
APPLICATIONPlug on impeller housing cover.Plastic fitting tool (P/N 295 000 086) on impeller housing cover.Cooling system fittings.
152
376
518
358
960
www.SeaDooManuals.net
219 200 106 PAGE 15 OF 19
SERVICE PRODUCTS (continued)
Hylomar sealantP/N 293 800 001
PL-32(100 g)
A00B3F4
APPLICATIONMulti-purpose gasket and jointing compound.
SealantP/N 293 530 011
Sikaflex 221(350 mL)
F01B1D4
APPLICATIONBaffle on applicable models.
Sikaflex primer 449P/N 293 530 012
(475 mL)
F01B1E4
APPLICATIONFor use with Sikaflex 221 sealant.
369
919
918
Heat resistant sealantP/N 413 709 200
Dow Corning 736(90 mL)
A00B3U4
APPLICATIONTuned pipe 787 engine.
SealantP/N 413 710 300
Loctite 179(80 mL)
APPLICATIONExhaust system 787 engine.
Gun KoteNot sold by Bombardier
Kal-GardCoating & Mfg. Corp.
APPLICATIONMagneto and armature plate.
Dielectric greaseP/N 293 550 004
Dow Corning(150 g)
F01B164
APPLICATIONBattery posts and cableconnectors.Thermosensor switch.
374
DOW CORNING ®
RTV Sealant736Heat Resistant Sealant
961
350
GreaseP/N 293 550 005
(400 g)
A00B2L4
APPLICATIONPTO flywheel.
Super lube greaseP/N 293 550 014
A00B474
APPLICATIONMulti-purpose lubricant.
LubricantNot sold by Bombardier
G.E. VersilubeG341M
orEsso Beacon 325
A00B1T4
APPLICATIONSliding surface of starter armature shaft splines.
924
932
SuperLube
PERMATEXINDUSTRIAL
R
R
Synthetic Lubricant
Multi-Purpose
With Teflon
Net Wt. 14.5 Oz. (411g)
R
www.SeaDooManuals.net
PAGE 16 OF 19 219 200 106
SERVICE PRODUCTS (continued)
Synthetic greaseP/N 293 550 010
(400 g)
F01B154
APPLICATIONCylinder and cylinder head screws.Carburetor linkage.Impeller shaft seal lips.Drive shaft/impeller splines.PTO flywheel.
Anti-seize lubricantP/N 293 800 023
Loctite anti-seizelubricant
12 oz (454 g)
F01B174
APPLICATIONCrankshaft thread/PTO flywheel.Crankshaft bearing seat.Spark plug threads.Magneto housing cover screws.
912
SYNTHETIC GREASE
362
Bombardier lubeP/N 293 600 016
(12 x 14 oz)
F01B0S4
APPLICATIONThrottle cable.Wear ring (when new).Corroded parts.Engine.Storage.
Sea-Doo fuel stabilizerP/N 413 408 600
(8 oz)
A00B3V4
APPLICATIONFuel system.
913
BOMBARDIERLUBE
340 g
DANGER
BOMBARDIER INC.Sea-Doo / Ski-Doo Division
Valcourt, Québec, Canada J0E 2LO
NEW!
upside down!Sprays
REPLACES SEA-DOO LUBEANTICORROSIVE LUBRICANT
Excellent for salt water andhigh humidity environments
FLAMMABLECONTAINER MAY EXPLODE IF HEATED.
DIRECT INHALATION OF SPRAY
MAY BE HARMFUL.
375
FUELSTABILIZER
NEW
®
®
Bombardier-Rotaxinjection oilP/N 413 802 900
(12 x 1 L)
F01B184
APPLICATIONAll models.
Bombardier-Rotax injection oilP/N 413 803 000(3 x 4 L)P/N 413 803 200(205 L)
F01B2H4
APPLICATIONAll models.
915
®
®
Two-stroke
Injection Oil
®
BOMBARDIER
1 U.S. quart
916
962
®
®
®
www.SeaDooManuals.net
219 200 106 PAGE 17 OF 19
SERVICE PRODUCTS (continued)
Bombardier-Rotax Formula XP-Ssynthetic injection oilP/N 413 711 000 (3 x 4 L)P/N 413 710 700 (205 L)
F01B354
APPLICATIONAll models.
Bombardier-RotaxFormula XP-S syntheticinjection oilP/N 413 710 500 (12 x 1 L)
F01B2G4
APPLICATIONAll models.
Jet pump oilP/N 293 600 011(12 x 6 oz)
Sea-Doosynthetic jet pump oil
F01B0P4
APPLICATIONAll models.
969
970
®
Injection Oil4 U.S. quart
®
®
BOMBARDIER
Two-stroke
Two-Stroke OilSYNTHETIQUE
FORMULA XP-S
937
Two-Stroke Oil
1 liter (1.05 U.S. qt)
Synthetic
®
BOMBARDIER
FORMULA XP-S
914
®
JET PUMP SYNTHETIC OIL
A) Silicone “Ultra Black”P/N 293 800 030
B) Silicone“Ultra Black HB”P/N 293 800 028
Loctite 598(300 mL)
F01B1A4
APPLICATIONRiding plate, deflector, jet pump support.Jet pump (on applicable models).
732 Multi-purpose sealantP/N 293 800 006
Dow Corning (90 mL)(clear)
F01B1C4
APPLICATIONRiding plate screw.
Sealant adhesiveP/N 293 800 033
Adchem 4511(clear)
F01B1S4
APPLICATIONRiding plate screw.Sponsons.
901
902
917
934
LAESDA
AD
CHEM
SCELLANT ADHÉSIF PREMIÈRE QUALITÉ PREMIUM SEALANT ADHESIVE
Adhesive activatorP/N 293 530 036
(250 mL)
F01B1Z4
APPLICATIONDecals.
Sea-Doo CleanerP/N 293 110 001 (400 g)P/N 293 110 002 (4 L)
F01B2J4
APPLICATIONAll models.
931
ACTIVEUR D'ADHÉSIF
250 mL
POUR L'APPLICATION DE MOULURE
ET VINYLES SENSIBLES À LA PRESSION
LORSQU'UNE MEILLEUREADHÉRENCE EST NÉCESSAIRE.
DANGER-ÉVITER TOUT CONTACT PROLONGÉ AVEC LA PEAU
LAVER À L'EAU FROIDE EN CAS DE CONTACT.
-UTILISER DANS UN ENDROIT BIEN AÉRÉ.
-TENIR LE CONTENANT BIEN FERMÉ.
-GARDEZ HORS DE LA PORTÉE DES ENFANTS.
-CONTIENT DU TRICHLORETYLÈNE.
-AVERTISSEMENT ! L'INHALATION DE CE PRODUIT
EST NOCIF.
N/P 293 530 036 FABRIQUÉ AU
946
947
BOMBARDIER
CLEANER
DANGER
400 g
EXTREMELY FLAMMABLE.HARMFUL OR FATAL IF SWALLOWED.
VAPOUR HARMFUL.293 110 002
DANGER4 L
BOMBARDIERBOMBARDIER
www.SeaDooManuals.net
PAGE 18 OF 19 219 200 106
SERVICE PRODUCTS (continued)
Spray paint for metallic parts onlyA) White (140 g)
P/N 293 500 029B) Purple (140 g)
P/N 293 500 020C) Yellow (140 g)
P/N 293 500 008D) Charcoal (140 g)
P/N 293 500 030E) Grey (140 g)
P/N 293 500 009F) Blue (140 g)
P/N 293 500 014G) Blue/Violet (140 g)
P/N 293 500 077Sea-Doo
paint
F01B0Q4
APPLICATION
A) 1992 engines and later.B) Tuned pipe and muffler.C) 1991 engines and prior.D) Tuned pipe, muffler and flame
arrester.E) Tuned pipe, muffler and flame
arrester.F) Tuned pipe, muffler and flame
arrester.G) Tuned pipe, muffler and flame
arrester.
926
930
925
927
928
929
957
SMC spray paintA) Teal
P/N 293 500 068B) Yellow (140 g)
P/N 293 500 078C) Lavender (140 g)
P/N 293 500 059D) Magenta (140 g)
P/N 293 500 060E) Blue (140 g)
P/N 293 500 073Sea-Doo paint for SMC
F01B0Q4
APPLICATIONStorage cover.A) GTS 1994-95.B) GTI 1996-97.C) GTS 1992-1993.D) GTX 1992-1993.E) GT 1991.
941
949
950
951
955
Sea-Doo spray paint for gelcoatA) Teal
P/N 293 500 063B) Green (140 g)
P/N 293 500 062C) Turquoise
P/N 293 500 066D) Light grey
P/N 293 500 067E) Grey (140 g)
P/N 293 500 040F) White (140 g)
P/N 293 500 041G) Purple (140 g)
P/N 293 500 042H) Rhodamine (140 g)
P/N 293 500 083I) Super white (140 g)
P/N 293 500 082J) Indigo blue (140 g)
P/N 293 500 102K) Yellow (140 g)
P/N 293 500 078L) Dark green (140 g)
P/N 293 500 101
F01B1Q4
APPLICATION
A) SPX 1994-95.B) XP 1993-94.C) SPX 1993.D) SP/SPI 1993.E) SP 1990-91-92 and GT 1990-91.F) 1993-94 models.G) XP 1991-92.H) XP 800 1995.I) 1995 models and later.J) Hull GSX 1996.K) HX and XP 1995-96-97.L) Hull GTX 1996-97.
940
939
953
954
920
921
922
968
956
VERTICALFANSPRAYPATTERN
HORIZONTALFANSPRAYPATTERN
ROTATEVALVENOZZLE 1/4TURN TOCHANGESPRAYPATTERN
Danvern Fanspray® - A Sprayon Exclusive Feature
DANGERDANGER
GELCOATPAINT
POUR
PEINTURE
www.SeaDooManuals.net
219 200 106 PAGE 19 OF 19
SERVICE PRODUCTS (continued)
Gelcoat (liquid)A) Super white (1 L)
P/N 293 500 075B) White (1 L)
P/N 293 500 033C) Mauve (1 L)
P/N 293 500 034D) Grey (1 L)
P/N 293 500 035E) Light grey
P/N 293 500 037F) Green (1 L)
P/N 293 500 038G) Turquoise (1 L)
P/N 293 500 039H) Teal (1 L)
P/N 293 500 069I) Yellow (1 L)
P/N 293 500 081J) Marine green (1 L)
P/N 293 500 097K) Indigo blue (1 L)
P/N 293 500 098L) Yellow (1 L)
P/N 293 500 099M) Dark green (1 L)
P/N 293 500 100
APPLICATION
A) 1995 models and later.B) 1993-94 models.C) XP 1991-92.D) SP 1990-91-92 and GT 1990-91.E) SP/SPI 1995.F) XP 1993-94.G) SPX 1993.H) SPX 1994-95.I) HX, XP 800 1995 and
XP 1995-96-97.J) SPX 1996.K) Hull GSX 1996.L) HX and XP 1995-96-97.M) Hull GTX 1996-97.
943
906
907
908
909
910
911
938
963
Seat paint (green)P/N 293 500 061
Spray 140gF01B0Q4
APPLICATIONXP model 1993-94.
Gelcoat repair kitA) P/N 295 500 430B) P/N 295 500 340C) P/N 295 500 216D) P/N 295 500 100E) P/N 295 500 009
F01B0R4
APPLICATION
A) All 1997 models.B) All 1996 models.C) All 1995 models.D) 1993-94 models.E) 1992 and prior models.
952
945
904
903
Gelcoat paste (white)P/N 293 500 016
(10 oz)
F01B1F4
APPLICATIONModels prior to 1995.
905
www.SeaDooManuals.net
Recommended