View
215
Download
1
Category
Tags:
Preview:
Citation preview
Introduction….Introduction….It was a dream come true of a fighter, an energetic soldier with eager spirit and innovation flowing with blood to prove himself Er. Narendra Kumar Joshi (Rtd. Lt.cdr. Indian
Navy) proved himself with strong determination grit and vision by establishing “NUSHAR” in the capital city of Delhi where he learnt in real sense, ways of Industrial life and Lead to Commencement of his own business on 1.11.1991
2
Our pillar of strengthOur pillar of strength
To Endeavour with utmost precision.
To anticipate needs of the people.
To serve excellence in all its dealing.
Good Quality, timely supply & genuine prices.
Continuous Research & development through
collective wisdom.
COMPANY’S FORECAST,VISION & OUT LOOK
3
Quality policyQuality policy
Offering CONCEPTUAL CHANGE
by continuous innovation
to meet the changing customer
needs“Team work is secret of our success
which has become a part of our culture”
4
Thermal Insulation Of building’sThermal Insulation Of building’s WHY ?WHY ?Due to global warming, atmospheric temperatures are high , causes heating of building structures which makes life difficult and inefficient working . To prevent high heating of building it is necessary to thermal insulate the structure
Thermal insulation prevent raising high temperature of building makes life comfortable & efficient economically and with one time effort and investment
High temperature variations result into thermal stress fatigue due to expansion and contraction of building structure consequently cracks development takes place. Ultimately water seepage results through cracks in rainy season
5
Advantage of Thermal Insulation… Advantage of Thermal Insulation… • Reflects 85% of solar heat before it gets absorbed
in to the ceiling or wall Structure
• Insulating the exterior building structure surfaces, hence resists the heat transfer to inside of the building, ultimately negligible heat transferred through structure and keep the building cooler in summer and warm in the winter
• The coating saves over 40-60% of cooling energy used for cooling of the building and significantly reduce the cost of running air conditioning / cooling system and the cost of thermal insulation is recovered in less than two years , Later money saving starts for life time
• Additionally it extends structure life due to reduced thermal stresses generated by high temperature variations 6
Advantages of Thermal insulation & Advantages of Thermal insulation & water proof chemical…..water proof chemical…..
In addition to thermal insulation of building the water proofing advantage are :-– 100% water proof film created on the surface– High crack bridging ability– Highly flexible and tough film formed – On the spot sealing of all types of cracks– Easy to apply with economy– We can use master coat on Damp surfaces also
Note:- Our Master Coat alone function as HEAT AND WATER PROOF both 7
ENRICH YOUR CONSTRUCTIONSENRICH YOUR CONSTRUCTIONS
• Super markets •Schools •Shopping Centres
• Warehouses •Factories •Hotels and restaurants
• Cinema halls •Houses •Hospitals/nursing home
• Roof top of Trains •Over head and underground water tank
• Wooden or Metal articles of Handicraft •Offices Cold storage etc.And any domestic & commercial or any other buildings or sheds
8
Where We Can Use Where We Can Use Master Coat………Master Coat………
Areas of Application……Areas of Application…… All new constructed plastered Walls, Industrial RCC flat and sloping roofs Swimming pools and basements Overhead and underground water tanks.(outside surface-for heat proofing &
Inside surface- for water proofing) During Damp proof course Interiors & exteriors of cooler body.(for cooling & rust proof) Terrace Gardens Stone Walls Asbestos sheet & Sheds Below mosaic tiles A/C ducts Metal roofs- Tin, GI sheet, PVDC sheet etc Syntax/Plastic tanks Concrete tanks Exterior RCC surface
9
Technology….Technology….
– Emulsified Multi-polymer (Co-polymers & Cross linked polymers) combined with
inert materials, designed to combat heat absorption & water leakage/seepage with high durability, economy and ease of application
– Material penetrates in the surface which covers and seals all the invisible pores of any surface, resulting in water proofing and Thermal insulation simultaneously
Note - Our All polymer coats are Acid Proof & Chemical Resistance
10
Our Products….Our Products….
• Heat, Water and Acid Proof Polymer
MASTER CHEMICAL COAT
• Heat, Water and Acid Proof Polymer
CHEMICAL PUTTY
• Heat, Water and Acid Proof Polymer
CHEMICAL TILE ADHESIVE
• Heat, Water and Acid Proof Polymer
WOOD PRIMER & PUTTY11
Technical specification
12
Tests Master Coat PuttyTemperature resistant up to 95°c up to 95°c
Water proofing excellent excellent
Thermal conductivity Very Low (0.101 w/m²k approx) Very Low (0.101 w/m²k approx)
Thickness of coating 50 - 120 micron 50 0-750 micron
Adhesion No Peeling off No Peeling off
Solar Reflectivity 85-90% 85-90%
Acid Resisitance Unaffected Unaffected
Alkali Resistance Unaffected Unaffected
Stain Resistance Unaffected/Easily Washable Unaffected/Easily Washable
Salt Resistence Unaffected Unaffected
Viscocity 21.5 Pa.s ----
Density 1.56 gm/cc 1.53 gm/cc
Coverage Area 16-22 sqft/kg 12-20 sqft/kg
Composition synthetic acrylic, Co Polymer &
crosslink polymers synthetic acrylic, Co Polymer &
crosslink polymers
wether Proofing excellent excellent
Durability High High
Heat, Water and Acid Proof Polymer chemical Coat ….◊ Large drop in internal temperature
◊ Reduces power consumption of Air conditioners
◊ A more productive working environment without air conditioning
◊ You can walk on roof surface even in peak sun light
◊ Roof is protected from Thermal shock due to varying sun load
◊ High Crack bridging ability
◊ Remarkable elasticity and ability to Cope up with thermal expansion and contraction
◊ Environmentally safe and convenient to apply
Water Proofing And Thermal Insulation with Master Coat
13
Heat, Water and Acid Proof Polymer chemical Coat◊ Ready to use solution
◊ Good resistant to most of the acids, alkaline and chemicals
◊ Non toxic, non-hazardous, tasteless, food grade film. (After curing.)
◊ Rust Proof Coat
◊ To be used on walls as a primer coat that will offer similar TSR's to the roof and Wall paint coatings
Temperature Difference between
Coated & non-coated
14
Technical Comparison….Technical Comparison….Untreated Roof ~ vs. ~ NUSHAR heat &waterproof Coating
◊ The heat insulation refers to a roof coatings reflectivity as a 'TSR'. (Total Solar Reflectivity)
◊ A new bright white roof surface can originally reflect up to 65% TSR, and make you cooler
◊ Light coloured roofs will keep you a little cooler, but only for a little while by Using NUSHAR heat reflective roof coatings, you can achieve up to 90% reflectivity in white colour, consequently preventing crack development due to thermal stress fatigue
Mater Coat Applied on Tin sheds and it reflects 90%of Heat
15
Our TSR percentage….Our TSR percentage….TSR = TSR = Total solar reflectivityTotal solar reflectivity
ColourStandard Roof
Coatingwith less Durability
NUSHAR MASTERCOAT Chemical
with High DurabilityWhite 15 - 20 % TSR 85% TSRCharcoal 6 % TSR 26 % TSRChocolate 7 % TSR 27 % TSRDark Green 7% TSR 35% TSRDeep Blue 8 % TSR 30% TSRGrey 10% TSR 27% TSR
16
Heat, Water and Acid Proof Polymer chemical Putty……
◊ It is versatile , eco- friendly coating
◊ Cures at room temperature giving tough & abrasion resistant crack-free films
◊ Has good resistance to many acids and chemicals
◊ It is in paste form and cures very fast and give high strength to cement plaster of the wall
◊ Its water proofing property prevents dampness and protects paints from detorating
17
Heat, Water and Acid Proof Tile Adhesive….
◊ “NUSHAR” brand has features which are much beyond all available products
◊ It has three in one product such as heat proof, water proof and acid proof with very high bonding strength and highly durability
◊ Floor and walls surface has to 0*0 levelled then fixing of stones, tiles, woods etc. become very easy
◊ It can bond all types of stones, tiles, woods, bricks and cementitious materials
◊ Using this product we can reduce bulk weight of cement mortar from building structure
Tile & Stone pasted on elevation with Tile Adhesive
18
How to apply Master Coat ?How to apply Master Coat ?
◊ CLEAN THE SURFACE THROUGHLY, AS IT SHOULD BE FREE FROM DUST, OIL, GREASE OR ANY FREE /LOOSE PARTICLES
◊ IT IS RECOMMENDED TO WIRE BRUSH THOROUGHLY FOLLOWED BY SANDING WITH EMERY
◊ REMOVE THE EXISTING PAINT LAYER/COATINGS BEFORE APPLICATION
◊ WATER WASH THE SURFACE BEFORE MASTER COAT APPLICATION
SURFACE PREPARATION
NOTE-: FILL THE CRACKS IF ANY (WITH NUSHAR POLYMER CHEMICAL PUTTY, ONLY AFTER CHEMICAL COAT)
Brushing Cleaning with Water
Cleaning and roughing the surface
19
Process of Applying Process of Applying master Coat .....master Coat .....
1. MIX/STIR THE MATERIAL THOROUGHLY
2. APPLY THE FIRST COAT
3. WAIT FOR 1 to 2 HOURS & THEN APPLY SECOND/ Final COAT
4. CONFIRM THAT FINAL COAT IS OPAQUE. IF NOT GO FOR ONE MORE COAT
5. LET THE FINAL COAT CURE FOR 20-24 HOURS BEFORE USE
20
Packing & Packaging Packing & Packaging
Available Product and Packing
Product Name Quantity(In Kg)
Master Coat 2.25kg
11.250kg
Putty 2.250Kg
11.250kg
Tile Adhesive 2.250Kg
11.250kg
21
Our Premium CustomersOur Premium Customers
22
• Kansara Group, Jodhpur
• Ganga Jumana Electronic, Jodhpur
• K.G. Marbles, Udaipur
• RTDC, Udaipur & Nathdawara
• Chodhary Opset Print, Udaipur
• Dilip Trading Company, Jodhpur
• Roop Rajat Township, Jodhpur
• Lodha Cards, Jodhpur
• Shri Ram Gavargum, Jodhpur
•Product Approved by:-MESONGCTaj Hari Mahal, JodhpurRailway Department, Jodhpur
DIFFERENCE BETWEEN CEMENT BASED & POLYMER DIFFERENCE BETWEEN CEMENT BASED & POLYMER BASED PUTTYBASED PUTTY
NUSHAR PUTTY OTHER PUTTY
Difference of Water Temperature in Difference of Water Temperature in Non Coated and Coated Non Coated and Coated
Project Undertaken….Project Undertaken….
Underground Water Proofing
Out Side Garden Water Proofing
Kansara Group, Jodhpur
More than 40,000 sq ft Work
Project Undertaken……Project Undertaken……
Master coat on Rcc roofBefore laying flooring
Master coat on Lime stone Terrace Water & Thermal Insulation
27
Nimit Bhandari, Jodhpur5,500 sq ft
Sudhir Purohit, Jodhpur2,600 sq ft
Project Undertaken……Project Undertaken……
Exterior Work Tank water Proofing
28
Anil Bhandari, Jodhpur6000 sq ft
Project Undertaken……Project Undertaken……
Water proofing And thermal Insulation on Terrace and water Tank
29Sudhir Purohit, Jodhpur2600 sq ft
Thermal Insulation Thermal Insulation Treatment on Tin Sheds…..Treatment on Tin Sheds…..
30
Thermal Insulation is proportional to thickness of the film
Dilip Trading Company, Jodhpur 5897 sq ft
Thermal Insulation of Thermal Insulation of Syntax Tank….Syntax Tank….
Surface Temperature difference found to be up to 30°C deg at peak solar radiation stage on of tanks up
to 15°C temp difference found in water filled
31
Our Other Product RangeOur Other Product Range……..……..
• Diamond Tools• Diamond Abrasive• Liquid Polish (super glosser,
shiner)• Wax Polish• Magnesite and Synthetic “ SiC
Abrasive”• Floor Polishing Machine
32
DIAMOND TOOLS FOR STONES……DIAMOND TOOLS FOR STONES……
• NUSHAR India has developed and is regularly being
active in developing various special purpose Diamond Cutting wheel on demand, we can also develop or design any kind of cutting tools such as Groove Cutting, Profile Cutting on difficult stones as per the requirement of our customers
33
DIAMOND ABRASIVEDIAMOND ABRASIVETYPES OF DIAMOND ABRASIVES• Metal Bond Diamond Abrasive:
METAL BOND IS USED FOR COARSE GRINDING OF STONES UP TO 220 MESH
• Resinoid Bond Diamond Abrasive: RESIN BOND IS USED FOR ACHIEVING “ REAL
MIRROR POLISH “ ON TOUGH TO POLISH STONES
ADVANTAGES• HIGH PRODUCTIVITY• HIGH POWER SAVING• FINEST FINISH 34
Jodhpur Sand Stone Mirror polished by Diamond Jodhpur Sand Stone Mirror polished by Diamond
Abrasive Abrasive – Gives wooden Look – Gives wooden Look
Shri Govind Prakash Bissa,Jodhpur
LIQUID POLISH / LIQUID POLISH / SHINER/ SUPER SHINER/ SUPER GLOSSER ........GLOSSER ........
Types of Liquid PolishSUPER GLOSSER LIQUID POLISH
(MULTI PURPOSE)STONE CARE (AVAILABLE IN VARIOUS COLOURS)APPU'S STONE & FLOOR (AQUA BASED)
Applications :- TO IMPROVE GLOSS AND GRACE ON
VARIOUS FINISHED SURFACES .
Mirror polished stones.Home Appliances.Automobiles.Wooden furniture. etc. 36
WAX POLISH …..WAX POLISH …..
Applications
• Floor Polishing• Automobile Polish• Handicrafts ( Wooden & Iron)• Furniture( Wooden & Iron)• Leather Articles
High coverageHigh glossHigh life
37
SILICON CARBIDE SILICON CARBIDE ABRASIVE…….ABRASIVE…….
• Magnesite Bond :-For coarse grinding operations 16 Mesh grits to 320 Mesh grit
• Synthetic Resin Bond:-For honing applications 220 to 1500 Mesh
• S.K.Bond (Five Extra):-For Final mirror like polish
For Floor , Stone grinding, Honing and mirror like polish
38
Frank- Furt Floor Polishing Frank- Furt Floor Polishing Machine ………Machine ………
The special features of the machines are:-• Heavy weight for higher productivity, stability and durability
• Thick sheet body for strength and life
• Original branded bearing used
• Heavy duty steel coupling for long life operations
• Voltmeter/Ampere meter is convenient for operators
• Heavy duty electric motor for high performance and productivity
• Minimum maintenance required
• Inbuilt water tank for continuous water supply for higher productivity and better result
• Heavy abrasive holding plate for higher productivity, stability and best result
39
Contact Us ……….Contact Us ……….• Contact Person:-
– Er. Narendra Kumar Joshi :-090010-93941 (C.E.O, Jodhpur)
– Mr. Arvind Joshi:-090010-93942(Director, Jodhpur)
– Er. Madhawam Vyas :- 090017-93978 (Marketing Head, Jodhpur)
– Mr. Amit Vyas (MBA):- 093526-96033 (Administration Manager, Jodhpur)
– Mr. Pavan Purohit :- 099280-71712 (Jaipur)
– Mr. Gopal Chattwani:- 090010-93950 (Alps Polishing, Udaipur)
– Mr. Paresh bhai:- 098984-41875 (Satyay paints, Surat)
– Mr. Ajay Purohit:- 093144-61146(Bhudho Enterprises, Bikaner)
Admin office: 25-26 Gajendra nagar, Near Subhawaton ki dhani, Opp FCI Gowdown P.O. K.U.M.B. Ph: 0291-2741624,2740148
Website: www.nusharindia.co.in, E-mail: nusharindia@rediffmail.com 41
Recommended