1 AT401- the easier way to travel and work. Christian Hellwig 1st of June 2010 COEE/Israel

1

AT401- the easier way to travel and work.

Christian Hellwig1st of June 2010

COEE/Israel

2

mobile?

3

flexible?

4

Is this the right enviroment?

5

Is this the right enviroment?Where is the s….

200m power cable for my

system?

6

Yes it is! Measure where no other Tracker can go.

Maximum Protection with IP54Cable-less Operation

Power LockBattery use

I love my job…!

7

Where we are with the 401?Product Placement - Functionality

Tracking

FunctionalityProbing Scanning

AT901B

AT901MR + T-Probe

AT901LR +T-Probe

AT901MR + T-Probe T-Scan

AT901LR + T-Probe T-Scan

TDRA

250

150

K €

350

50

AT 401

Reflectorless

8

AT 401 for tooling in AerospaceAbsolute Tracker

Highest performance and fully portableEasiness of use (power lock)Portability (7.5 kg)Battery poweredMeasuring range

9

AT 401 for Tooling in Aerospace

For simple applications – point based tool build / inspectPortability (7.5 kg), Battery poweredprice

10

AT 401 - Automotive Applications

Installation work in Production lines: AT 401

high portability ( battery powered), powerlock

AT 401 for Hydro Turbine – Installation

• Real-time adjustment of stator bearing brackets

Hydro Generator and Turbine – Installation

•Alignement of Turbine shaft and Generatorshaft •Adjustment of stator components (dovetail key bars)

•Portability

•IP 54

•vertical range (+/-145 deg)

•Powerlock

AT 401 Generator – Adjustements cylindrical Build

• Building/positioning of stator components for hydro power systems easiest in a cylindrical coordinate system (Radius, hz angle, height)

•Portability

•IP 54

•vertical range (+/-145 deg)

•Powerlock

Nuclear – Manufacturing

• Geometrical Inspection of Pwr reactor pressure vessel

T – Probe for complex geometry

AT 401 for contaminated Areas (sealed, IP 54)

Machine foundation alignement (as Tetra Pack)

AT 401

• Real-time adjustment / build (X,Y,z = height) level to gravity•Range/ volume > 80m •Portability, Battery

powered

•IP 54

•Powerlock

•WiFi

Rolleralignment with AT 401 in PCDMIS 2010Portability, battery powered

Accuracy (< 0.1 mm) and orient to gravity

Simple user interface

17

As-built inspection

AT 401 Railway applications

Measure of the profile (Segment/Section)

Inspect of simple geometry as width (Y), height(Z) , length(X)

Measure of height and length of a window or door

Needs: portability

Industrial, IP 54

complete solution(PC DMIS Script)

18

AT 901 B or T – Probe for Windmill Blade and Mould Inspection

Requires dynamic measurements (thousand of points)AT901 with T-Probe for cylindrical bolt measurements

19

Shipyard – Geometrical inspectionThis is a Reflectorless Application For TDRA6000

20

Thank you for your attention