View
241
Download
0
Category
Preview:
Citation preview
8/11/2019 00_Introduction to Parameter Planning
1/10
1 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA
Introduction to Parameter Planning
BSSPAR
Module 00
8/11/2019 00_Introduction to Parameter Planning
2/10
2 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA
Legal Notice
Intellectual Property Rights
All copyrights and intellectual property rights for Nokia training documentation,
product documentation and slide presentation material, all of which are forthwithknown as Nokia training material, are the exclusive property of Nokia. Nokia ownsthe rights to copying, modification, translation, adaptation or derivatives includingany improvements or developments. Nokia has the sole right to copy, distribute,
amend, modify, develop, license, sublicense, sell, transfer and assign the Nokiatraining material.
Individuals can use the Nokia training material for their own personal self-
development only, those same individuals cannot subsequently pass on that sameIntellectual Property to others without the prior written agreement of Nokia.
The Nokia training material cannot be used outside of an agreed Nokia trainingsession for development of groups without the prior written agreement of Nokia.
8/11/2019 00_Introduction to Parameter Planning
3/10
3 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA
Module Objectives
At the end of the module, the participant will be able to:
Sketch a BSS Managed Object Hierarchy
Look up the parameters at each level, in a parameter dictionary Identify parameter value ranges and default settings
Find the changes to objects and parameters, that occur with each BSS softwarerelease
Introductionto Parameter
Planning
8/11/2019 00_Introduction to Parameter Planning
4/10
4 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA
Managed Object Hierarchy
ADJC FHS
RTSL
TRX HOC POC
BTS
HW-DB
BTS-SW
BCFMABA
BSC
Introductionto Parameter
Planning
Segmen
t!
8/11/2019 00_Introduction to Parameter Planning
5/10
5 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA
Example of a BSC Level ParameterIntroductionto ParameterPlanning
8/11/2019 00_Introduction to Parameter Planning
6/10
6 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA
Example of a BCF Level ParameterIntroductionto ParameterPlanning
8/11/2019 00_Introduction to Parameter Planning
7/10
7 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA
Example of a BTS Level ParameterIntroductionto ParameterPlanning
8/11/2019 00_Introduction to Parameter Planning
8/10
8 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA
Example from theBSS and NSS RNW Par. Dictionary
Introductionto Parameter
Planning
8/11/2019 00_Introduction to Parameter Planning
9/10
9 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA
Example of a Summary of ChangesIntroductionto ParameterPlanning
8/11/2019 00_Introduction to Parameter Planning
10/10
10 BSSPAR-Introduction to Parameter Planning 2006. 13-467817-V3 NOKIA
MOC Call Phases
MS BTS BSC
AUTHENTICATION (SDCCH)Phase 2 : MM signalling
CIPHERING MODE (SDCCH)Phase 8 : Ciphering
TMSI REALLOCATION (SDCCH)
SETUP (SDCCH)
Phase 2 : MM signalling
CH. REQUEST (RACH)
IMMEDIATE ASSIGN(AGCH)
SERVICE REQUEST (SDCCH)
Phase 1 : Paging, initial MS
CH.RELEASEPhase 4 : Release
ALERTING & CONNECT (FACCH)Phase 2 : MM signalling
CONN. ACK. and MEASUREMENTPhase 15 : Conversation
DISCONNECT & RELEASE (FACCH) Phase 4 : Release
ASSIGNMENT (SDCCH-FACCH)Phase 3 : Basic assignment
Introductionto Parameter
Planning
Recommended