View
68
Download
1
Category
Preview:
Citation preview
TP LINK SUPPORTWIRELESS ROUTER AND MODEM SUPPORT
TP LINK WIRELESS ROUTER
TP LINK ROUTER SETUP• Open the web browser and type the IP address of the device in the address bar
(default is 192.168.1.1 or 192.168.0.1). Press Enter.
Router Firmware page
• Type the username and password in the login page, the default username and password both are admin, Then click OK to log into the device.
UN & Password
• Click on Wireless->Basic on the left side and then configure the basic wireless settings: Enable "Enable Wireless" and "SSID
SSID & Password
• Click Save/Apply to save your settings. Sometimes you might need to reboot your router
to active these settings.
Now your TP Link router is ready to connect to other device like Mobile phone, Tablet and computers using wireless network
Need help? Call 1 877 777 8906 for Tp Link Router support
Thank you for Watching this video for more updates
Subscribe to our channel
Recommended