Security System-Updated Storyboard
Preview:
Citation preview
- 1. VO:- How does the system work? Note:- Text Animation
- 2. VO:- Put the camera sensor in the area you would like to
protect. Note:- camera sensor put in the car, construction
industry, Trucking industry, randomly.
- 3. VO:- Then simply enter your alarm code into the keypad, and
leave the area. Note:- Then enter the alarm code into the
keypad
- 4. VO:- When a violator enters the area, Note:- A violator
enters into the car, construction industry, Trucking industry.
- 5. VO:- the sensor will trigger the alarm, and Note:- than the
sensor are activated
- 6. VO:- the camera will begin to record and transmit video.
Note:- and camera started recording
- 7. VO:- The alarm panel will then connect to Note:- than the
alarm panel monitoring station
- 8. VO:- the 24 hour monitoring station and begin transmitting.
Note:- In monitoring station security getting the live video
- 9. VO:- Our 24 hour monitoring station Note:- Line animation
monitor to next slide.
- 10. VO:- will immediately contact you and Note:- Line animation
and zoom on phone & massage then open video clip.
- 11. VO:- send the video of the intrusion directly to your phone
or computer, Note:- Scale up table and computer then appear video
on monitor and phone.
- 12. VO:- and you can choose to take whatever action you deem
appropriate. Note:- zoom on character and phone & take action
tag scale down to up.
- 13. VO:- There is no need to run any wires, or even use a
screwdriver. Note:- wires and screwdriver icons appears according
to vo.
- 14. VO:- Your system can begin protecting you in minutes.
Note:- Logo Scale down to up protection tag scale up to down on
monitor.