HyDraw V415 Guided Tour : circuit design software from VEST, Inc

Guided Tour |© VEST, Inc. | www.VESTusa.com HyDraw®

V415

HyDraw® V415

Guided Tour

http://www.vestusa.com/HyDrawV415GuidedTour.asp

http://www.vestusa.com/HyDrawV400.asp

http://www.vestusa.com/

V415

Contents

Inserting Symbols

Inserting Envelope

Inserting Net List

Contact VEST

Inserting Ports List

Inserting Parts List

Drawing Page Setup

Assigning Model Codes

Completing Connections

Creating ConnectionsHyDraw

Circuit Drawing

Introduction

Demo Library

HyDraw V415 Guided Tour

V415

HyDraw V415 Guided Tour

V415

Introduction

Port Chart

Parts List

Use HyDraw commands to create this circuit drawing.

V415

Circuit Drawing

To create the circuit drawing:

• Insert and orient all the symbols in the drawing.

• Insert an envelope.

• Insert ports on the envelope and create connections.

• Insert and connect components outside the envelope.

• Assign model codes to all the symbols.

• Insert page outline and title block.

• Create Parts List, Port Chart, and Net List.

V415

HyDraw

Start HyDraw. It will open a new drawing.

V415

Demo Library

Select the Demo library from the HyDraw Library Explorer. This will now be the default

library for this drawing.

The Demo library is provided with the evaluation version of HyDraw, it has a limited

number of symbols and some component data has been entered.

V415

Inserting Symbols

V415

Inserting Symbols

Insert the first component into the drawing. For example, component 5, which is a

direction control valve.

Traverse the menu and click the Spring Centered tree item.

V415

Inserting Symbols

The symbol library of Spring Centered, Double Solenoid valves is displayed.

Select the symbol.

V415

Inserting Symbols

Drag and drop the symbol to an appropriate location on your drawing page.

V415

Inserting Symbols

Zoom into the drawing area and see that the symbol is inserted with an auto-assigned

component ID in a balloon next to it.

V415

Inserting Symbols

To change the component ID, which is displayed in the balloon, double click the number

and change it to 5.

V415

Inserting Symbols

The Direction Control Valve symbol is inserted with a lot of text attributes.

To view these attributes, select the Direction Control Valve symbol and click the Edit

Properties button. The HyDraw Property Manager will display.

V415

Inserting Symbols

View all the attributes in the HyDraw Property Manager.

When we insert a symbol without selecting its model code, the symbol is inserted with

blank model code values.

V415

Inserting Symbols

To insert the Check Valve symbol into the drawing, traverse through the menu and select

the Check (Valve) tree item.

V415

Inserting Symbols

Drag and drop the Check Valve symbol into your drawing.

Note that the Check Valve was automatically assigned a component ID of “6”.

HyDraw increments the last component ID automatically.

V415

Inserting Symbols

Locate the Relief Valve symbol.

V415

Inserting Symbols

Drag and drop the symbol into the drawing.

V415

Inserting Symbols

Notice, the Relief Valve symbol is not in the required orientation.

To rotate the symbol, select its Rotate Shape pivot point and drag such that the symbol is

rotated by 180 degrees.

V415

Inserting Symbols

The symbol is rotated but the text remains vertical.

V415

Inserting Symbols

Insert component 8, Needle Valve – Screw-in Cartridge into the drawing by searching for

the NV1220A0N model code in the component database.

Enter the first few letters of the Model Code search options and click the Search for Model

Code button.

V415

Inserting Symbols

The search yields a list of model codes starting with NV.

Select NV1220A0N

The symbol of the Needle valve displays in the Explorer.

V415

Inserting Symbols

Drag and drop the Needle Valve into your drawing.

V415

Inserting Symbols

Select the Needle Valve and click the Edit Properties button.

V415

Inserting Symbols

The HyDraw Property Manager displays the properties of the Needle Valve inserted into

the drawing.

Notice, all the properties of the selected model code are inserted into the drawing with the

component.

V415

Inserting Symbols

To copy component 7 to a different location in the drawing, right click the symbol and

select copy.

V415

Inserting Symbols

Paste the symbol to the required location in your drawing.

Rotate the symbol to its required orientation.

Change the component ID to 4.

V415

Inserting Envelope

V415

Inserting Envelope

Use the Envelope button to draw an envelope around the inserted symbols.

V415

Inserting Envelope

The envelope is inserted in the drawing. It is also allocated a default component ID.

Change the component ID to 3.

Once the envelope is inserted, you can move its location by selecting and dragging it or

by stretching one of its sides.

V415

Creating Connections

V415

To connect the P port of component 3, with external port P1,

Click the Pressure line icon on the HyDraw menu bar.

V415

Click port P of component 5, then drag the envelope until it snaps to the envelope line.

V415

On releasing the mouse, the Port icon is inserted automatically on the envelope line and

the Pressure Line connection is created.

Notice, the Red connection square changes to a black dot on port P of component 5.

This change in color indicates that the connector is connected properly to the port.

V415

When the port is inserted, it is inserted with its name as “?” by default.

Double click “?” to change it.

The port is inserted with its attributes as blank.

Later, we will see how to fill these attributes automatically from the HyDraw Library.

V415

Pivot Point is designated by a green dot.

Move segments of the connection by dragging its pivot point to its new position.

V415

The External Port inserted on the envelope line remains attached to the envelope line.

When you drag the port to move it, it will only move along the envelope line.

V415

Insert the next connection.

Connect port 1 of component 4 to the

Pressure line. Click the Pressure line icon

on the HyDraw toolbar.

Click near port 1 of component 4, drag

the other end of the line to the Pressure

line. The cursor snaps to the Pressure

line.

When you release the mouse, you will

notice that the kink in the connection

automatically disappears when the

connection line is drawn.

V415

Connect port 2 of component 7 to port A

of component 5.

Then, select component 5 and drag it

such that the connection becomes

vertical.

Or

Use left or right keys on the keyboard to

move the object. Use the Shift key to

make finer movements.

The cursor shape changes in the

Connection Drawing mode.

Click the Pointer tool on the Visio toolbar

to return to the Normal command mode.

V415

To move the component ID balloon,

select the component and drag the

yellow pivot point to the desired location.

Note

If you do not see the yellow pivot point

on selecting the component, click the

Pointer tool and select the component

again.

V415

Complete the other connections in the drawing using the Pressure Line connection type.

V415

Change the Connection line type to Pilot by clicking the Pilot button, which is violet in

color.

Connect all the Pilot lines.

V415

Change the Connection line type to Tank by clicking the Tank button, which is blue in color.

Connect all the Tank lines.

Jumpers are drawn automatically when two connection lines cross each other.

V415

Let us now complete the rest of the circuit.

Insert the symbol of the Tank from the Library menu.

Notice, the inserted Tank symbol has a balloon and a component ID allocated to it.

Ensure that these are not included in the Parts List.

V415

Select the Tank symbol, and click the Edit Properties icon.

The HyDraw Property Manager displays.

Uncheck the Include in Parts List check box.

The balloon and component ID disappears from the Tank symbol.

V415

Insert the rest of the components and create the appropriate connections to complete the

circuit diagram.

V415

In the completed circuit diagram, notice the External Port symbol.

Replace the Plug symbol by Plugged Plug Port symbol.

V415

Open the Library Explorer, and click on the External Port Library tab.

Select the plug to be replaced and check the Replace symbol check box.

Drag and drop the Plugged Port symbol over the existing port symbol in the drawing.

The symbol of the plug is replaced by a Plugged Port symbol.

V415

Now, assign model codes to all the inserted symbols.

Close HyDraw Library Explorer and open HyDraw Property Manager.

This allows you to maximize the drawing space.

V415

Fetch Button

Let us start with the Check Valve, component 6.

To find and include the model code of the check valve, select the Check Valve and

click the Fetch button.

V415

The Fetch from Library dialog box

displays when the Fetch button is

clicked in the HyDraw Property

Manager.

To refine the search, select SUN

Hydraulics from the list of

manufacturers and click the Search

button again.

All SUN valves are displayed.

V415

Click the Search button.

All the Model Codes associated with

this Check valve are displayed.

You can also enter the full or partial

Model code to search.

Select the Model code and click OK.

V415

When you select the Model Code and click OK, the model code is transferred into the

selected symbol in the drawing.

V415

Let us now find the model code of the Direction Control valve using the design

requirements.

Since the valves require a minimum flow of 8 gpm and 3000 psi pressure, enter these as

design requirements.

This requirement is saved with the component.

V415

If the circuit designer wants to attach a special note to this valve, then you click the

Note icon and write a text note, which is saved with the component on clicking OK.

V415

The Fetch from Library dialog box displays on clicking Search in the HyDraw Property

Manager.

Notice, the design requirement values are pre-entered in the dialog box.

Click the Search button to find components, which meet this design criteria.

V415

Select the required model and click OK to transfer the values to the symbol in your

drawing.

The model data is attached to the component.

V415

Let us now attach an accessory, a spare seal kit to this Direction Control Valve.

Select the Direction Control Valve and click Fetch in the Accessories section.

The Fetch Accessories from Library dialog box displays.

Select Seal Kit as the component type.

V415

Select the Seal Kit you want to attach, then click Add.

You can add multiple accessories to any component.

Click OK to add the accessory to the selected component.

V415

The selected accessory is added to the Direction Control Valve.

You can expand the accessory data to view the complete model data of the accessory.

Change the item ID to 5A.

V415

For the manifold block represented by the envelope line, there are no model codes in the

library.

Model Code, Description, and Manufacturer can be entered in the HyDraw Property

Manager and saved with the symbol.

V415

To assign properties to the external ports, select the port and click the Fetch button in the

HyDraw Property Manager.

The Fetch Port from Library dialog box displays.

Select the port type and port size, then click OK to transfer the model data to the port

symbol in the drawing.

V415

The creation of a circuit drawing and allocation of model data of all components in the

circuit is now complete.

On the System tab of the HyDraw Property Manager, you can see all the components and

ports.

You can also assign accessories to the system in the Accessories section.

V415

Drawing Page Setup

V415

Drawing Page Setup

Let us now insert the drawing border and the title block into the drawing.

Use the Shapes button on the Visio menu and select the appropriate Title Blocks*

menu item. (*Title Block stencils only available in Microsoft Visio Professional 2007)

V415

Drawing Page Setup

Title Block shapes are displayed.

Drag one of the page outlines into your drawing.

V415

Drawing Page Setup

The page outline automatically takes the shape of the page.

Move the circuit drawing by selecting the entire drawing.

Move it such that components do not cross the page outline.

V415

Drawing Page Setup

Drag and drop the title block into the drawing.

It automatically snaps to a corner of the drawing.

V415

Drawing Page Setup

In the next steps, let us insert the Parts List and Port Chart into the drawing.

To be able to insert these charts, we need to either change the sheet size or

insert these charts on a fresh page.

V415

Let us change the sheet size to A3 to get a larger drawing area.

Click the Page Setup option on the Visio File menu.

Set the page size to A3 and its orientation as Horizontal.

Drawing Page Setup

V415

We now have a larger page.

There is enough space to insert the Parts List and the Port Chart.

Drawing Page Setup

V415

Select the Parts List command from the HyDraw toolbar.

V415

You can use all the default settings in the

Create Parts List dialog box, click Next.

Click Insert to Drawing to insert the

Parts List into the drawing.

V415

Select a window area where you want to insert the Parts List.

V415

The Parts List chart is inserted into the drawing.

V415

You can move the yellow pivot points to adjust the width of the columns,

such that they fit into the available space.

V415

The complete chart can be dragged to a new area of the drawing.

V415

The drawing and the chart can be moved, such that they fit the paper size.

V415

Let us now insert the Port List into the drawing.

Select Create Ports List from the HyDraw toolbar.

Use default selections in the Create Ports List

dialog box, click Next.

Click the Insert button to insert

the Ports List into the drawing.

V415

The Ports List is now inserted into the drawing.

V415

Inserting Net List

V415

Inserting Net List

We will create a NET list of the connections inside the manifold within the envelope.

This NET list can then be used by VEST downstream applications like MDTools Manifold

Design software and Manifold Autorouter.

V415

Inserting Net List

Select the Create Net List command button from the HyDraw toolbar.

V415

Inserting Net List

Use the Select Symbols and Connections button to select symbols and connections inside

the envelope by selecting a rectangular area.

V415

Inserting Net List

A Net list is created.

V415

Inserting Net List

Click a net line item. The net will be highlighted in the drawing.

Make sure that all the connections in your circuit are correct and complete.

Click OK to save the Net List to your drawing.

V415

thanks

This completes the Guided Tour.

For more information on HyDraw V415 contact VEST.

Thank You !

V415

Contact VEST

Enhance your productivity and competitive edge.

HyDraw® V415 Evaluation Software

Call: +01 (248) 649 9550

Fax: +01 (248) 649 9560

Email: sales@VESTusa.com

support@VESTusa.com

Visit: www.VESTusa.com

HyDraw® V415 …circuit design made easy

mailto:sales@VESTusa.com

mailto:support@VESTusa.com

http://www.vestusa.com/HyDrawV400FreeEvaluation.asp

HyDraw V415 Guided Tour : circuit design software from VEST, Inc

Design

Circuit Design with HyDraw CAD700 : What's New

Bulletproof Vest

Brochure VEST source v100817 · HyDraw ® Get your designs approved faster and easier, ensuring your systems are correctly commissioned and maintained. Use HyDraw to create professional

JACKET & VEST

Lyngdal kommune - Digital og skjult mobbing 27.01.17 ... · Kommunerevisjonen Vest, Vest Agder IKS Skjult mobbing og digital mobbing Side 1 SAMMENDRAG Kommunerevisjonen Vest, Vest-Agder

Contextul planificării in Regiunea Vest 10.09.2012 planificarii in Regiunea Vest... · în Regiunea Vest” este rezultatul demersurilor ADR Vest de a sprijini antreprenoriatul,

HyDraw Library Manager 2019 User Manual - vestusa.com · Library Manager 2019 VEST, Inc. 3250 W, Big Beaver Road, Suite 440, Troy, MI 48084 USA Tel: +1 248 649 9550 Email: ... HyDraw

Thời Trang Vest | Xu Hướng Thời Trang Vest Công Sở

Clinton Vest

Stiluri Vest

Vest Novia

Valkyrie Vest

Anxiety vest

Gloria Vest

REGIUNEA VEST COLECTORI VALORIFICATORI ...arpmtm.anpm.ro/upload/5245_arpmtm_REGIUNEA VEST COLECTORI...REGIUNEA VEST COLECTORI_VALORIFICATORI DESEURI FEBRUARIE 2009 Nr. crt. Denumire

HyDraw - VEST, Inc · VEST, Inc. warrants that, as of the date on which the Software Products are delivered and licensed to Licensee and for ninety (90) days thereafter, the (Warranty

HyDraw CAD 2020 - VEST, Incs-New.pdfHyDraw ® CAD 2020. T OC What’s New! HyDraw Library Manager 2020. Second B-Port Automatically Inserted on Slip-in Cartridge Symbol. Unstack Symbols

HyDraw - VEST, Inc · HyDraw ® CAD 2018 “Power-to-Design” circuits VEST, Inc. 3250 W, Big Beaver Road, Suite 440, Troy, MI 48084 USA Tel: +1 248 649 9550 Email: sales@VESTusa.com

Circuit Design with HyDraw V500 : What's New

Midriff Vest