Irwin bolt cutters

IRWIN University Specialist Program

IRWIN BOLT CUTTERS•CAM ADJUSTED BOLT CUTTERS.

•ARM ADJUSTED BOLT CUTTERS.

•WIRE AND CABLE CUTTERS.


WHAT ARE THEY USED FOR

BOLT CUTTERSThey are used for cutting steel rod, bolts wire and chains etc.

Used by: Construction workers,Steel erectors Rescue services etc.


1. CAM ADJUSTED (BC RANGE)2. ARM ADJUSTED

THERE ARE TWO TYPES OF BOLT CUTTERS

Cam Adjusted Type Arm Adjusted Type


BOLT CUTTERS BOLT CUTTERS WITH HIGH TENSILE JAWS CAN CUT STEEL WITH A TENSILE STRENGTH UP TO

112tons/in² - 1640 N/mm² (942)ALL IRWIN BOLT CUTTERS JAWS ARE MADE FROM A HIGH QUALITY STEEL THAT

UNDERGOES A TWO STEP HARDENING AND HEAT TREATMENT PROCESS. THIS

ENSURES THAT THE CUTTING EDGES OF THE JAWS RETAIN THEIR CUTTING

ABILITY CUT AFTER CUT.

THE BC RANGE HAS A SIMPLE CAM ADJUSTMENT PROCESS THE KEEPS THE JAWS

SET FOR OPTIMUM PERFORMANCE. ARM ADJUSTED BOLT CUTTERS GIVE THE

END USER FINE ADJUSTMENTS FOR CONTROLLED CUTTING

BOLT CUTTERS WORK WITH A COMPOUND ACTION FULCRUM WHICH CONVERTS

THE FORCE AT THE CUTTER JAWS TO A 1 – 80 RATIO.

(FOR EVERY 1lb OF FORCE AT THE HANDLES IT GENERATES 80lb OF FORCE AT

THE JAWS)


CENTRE CUT CLIPPER CUT END CUT

TYPES OF JAWS AVAILABLE:


SPECIFICATIONS ARM ADJUSTED RANGE

TWO STAGE HEAT TREATED AND GROUND JAWS

DROP FORGE STEEL JAWS

DROP FORGE STEEL HANDLES

SAFETY STOPS TO REDUCE CHANCES OF HAND INJURY

JAW ADJUSTERS

ARM ADJUSTED BOLT CUTTERS ARE HEAVY AND ROBUST WITH A WIDE RANGE OF ADJUSTMENT WHICH CAN BE QUICKLY CHANGED.FOR CONTINUOUS LONG TERM USE THIS IS THE FIRST AND ONLY CHOICE OF THE PROFESSIONAL.


CAM ADJUSTED BOLT CUTTERS ARE LIGHTWEIGHT AND EASY TO ADJUST IDEAL FOR A SMALL WORKSHOP GARAGE ETC.

SPECIFICATIONS BC RANGE

CAM ADJUSTMENT NUTS

•TWO STAGE HEAT TREATED AND

GROUND JAWS

•DROP FORGE STEEL JAWS

•DROP FORGE STEEL HANDLES

•CAM ADJUSTMENTS FOR QUICK JAW

ALIGNMENT


SPECIFICATIONS 909 CABLE CUTTER •DROP FORGED STEEL JAWS.

•DOUBLE FULCRUM ACTION CUTTING.•PRESSED STEEL HANDLES SPRING LOADED FOR EASY OF USE.•SINGLE HANDED OPERATION WITH A THUMB LOCK TO HOLD CLOSED.•JAWS CHEMICALLY BLACKED FOR RUST PROTECTION.

CUTTING CAPACITY: 909

SOFT STEEL WIRE /CABLES = 4.0mm max.

HARD STEEL WIRE/CABLES = 1.5mm max.


FEATURES AND BENEFITS DROP FORGE STEEL JAWS STRENGTH AND DURABILITY UNDER EXTREME CONDITIONS

TWO STEP HARDENING ON JAWS EXTENDED CUTTING EDGE LIFE AND RESILIENCE

JAWS PRECISION GROUND MORE EFFICIENT CUTTING.

ALL JAWS ARE INTERCHANGEABLE SAVES ON REPLACEMENT COSTS.

JAWS ARE FULLY ADJUSTABLE WILL SUIT THE INDIVIDUAL PARTICULAR REQUIREMENTS.

HANDLES DROP FORGE STEEL FOR SAFETY AND DEPENDABILITY.

CLEAR IDENTIFICATION ON STRAP EASE OF SELECTION OF SIZE FOR END USER.


PART No TYPE OF CUT ADJ

in mm lb kg HIGH TENSILE LOW TENSILE

BC914H 14 355 2.1/4 1 CENTRE CAM 3.1/6" 5mm 5.1/6" 7.9mm

BC918H 18 460 3.3/8 1.5 CENTRE CAM 1/4" 6.4mm 3/8" 9.5mm

BC924H 24 610 5.3/8 2.5 CENTRE CAM 5.1/6" 7.9mm 7.1/6" 11.1mm

914H 14 355 2.1/2 1.1 CENTRE ARM 3.1/6" 5mm 5.1/6" 7.9mm

918H 18 460 4 1.8 CENTRE ARM 1/4" 6.4mm 3/8" 9.5mm

924H 24 610 6.1/2 3 CENTRE ARM 5.1/6" 7.9mm 7.1/6" 11.1mm

930H 30 760 10.1/2 4.8 CENTRE ARM 3/8" 9.5mm 9.1/6" 14.3mm

936H 36 915 15 6.8 CENTRE ARM 7.1/6" 11.1mm 5/8" 15.9mm

942H 42 1070 21.1/2 9.8 CENTRE ARM 1/2" 12.7mm 3/4" 19mm

OVERALL LENGTH APP WEIGHT CUTTING DIAMETER OF STEEL

CUTTER SELECTION CHART

Technology

Irwin bolt cutters