54
metamason, inc. TM © confidential and proprietary draft copy, for discussion only 130 w union st. pasadena, ca 91103 lokarpas@metamason.com | www.metamason.com | 415.694.8699 Leslie Oliver Karpas ceo & founder meta- modernism a design philosophy for the 3rd industrial revolution santa clara, ca fall 2015 by Leslie Oliver Karpas, ceo metamason inc

Inside 3 d printing metamoderism, leslie oliver karpas (save small)

Embed Size (px)

Citation preview

Page 1: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

meta-modernisma design philosophy for the 3rd industrial revolution

santa clara, ca fall 2015

by Leslie Oliver Karpas, ceo metamason inc

Page 2: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

Page 3: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

“3D printing is hitting the Trough of Disillusionment ... It’s still too hard for common people.” -JeffKowalski,AutodeskCTO

inside 3d printing, santa clara - 2014

Page 4: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

Page 5: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

3d printed design today

Page 6: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

Page 7: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

3d printed medicine today

Page 8: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

bone replacement

Page 9: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

prosthetic limbs

Page 10: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

4d biomaterials

Page 11: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

hearing aids

Page 12: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

needmore

Page 13: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

fathers of modernism

Frank Lloyd Wright Meis Van Der Rohe Le Corbusier

Page 14: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

gropious | bauhaus

Page 15: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

innovation = mastery of emergent medium

Page 16: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

frank | meis | corb

Page 17: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

mass production revolutionmachines | assembly lines | globalization

Page 18: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

accessible good design

Page 19: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

the least bad for the most people

Page 20: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

machine vision | cloud computing | 3d printingenabling the next revolution

Page 21: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

3d scanning everywhere

Page 22: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

gpu cloud computing = the new hotness

Page 23: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

now 3d printing the impossible

Page 24: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

on-demand supply | local production | no waste product 3rd industrial revolution

Page 25: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

localism for manufacturing

Page 26: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

we dream of the future

Page 27: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

old thinking stands in our way

Page 28: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

?where’s the killer app?

Page 29: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

?printers = early computers

we’re the home brew computer club

Page 30: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

edit publishfax

it’s the content, not the tools

Page 31: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

Page 32: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

software is the bridge

Page 33: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

input interface instantiate

Page 34: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

3d printed medicine today

DICOM

.STL /CAD

3D

measurement

fea/cfd simulation

medical model

Page 35: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

meta-modernisminput interface instantiate

Page 36: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

input interface instantiate

Page 37: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

masters of post-post moderism

Frank Gehry Zaha Hadid Anish Kapoor

Page 38: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

productionize uniqueness

Page 39: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

mechanized construction

Page 40: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

emerging meta-modernists

Kegan Schouwenburg Jessica Rosenkrantz &Jesse Louis-Rosenberg

Siavash Mahdavi

Page 41: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

scan fit print

Page 42: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

input interface instantiate

Page 43: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamasonTM, inc. © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

invisalign, world’s best selling 3d product

Page 44: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

POOR SEAL

NOSTRILS ABRADED BY MASK

TANGLED HOSE

cpap issues

STRAPS MARK FACE

Mmm e t a m a s o ntm

Page 45: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

Respereon-demand

3d-printed silicone cpap masks

Mmm e t a m a s o ntm

Page 46: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

Mmm e t a m a s o ntm

Page 47: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

Mmm e t a m a s o ntm

print

scan

fit

Page 48: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

technical video

Page 49: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

custom fit cpap maskslos angeles, cametamason.com

TECHNICAL EXPLANATION07.03.2015

PAGE 06

MASK CREATION

Using the facial feature points from the 3d scan we begin to figure out where the mask should be placed onto the face

The nose tip, the nostril point, and the lower point of the nose form a triangle which allow us to figure out the nasal cavity. A series of iterations are made which get the curve closer and closer until the curve accurately contours the nasal cavity.

Since the whole algorithm begins with the placement of points on the face, we can dynamically change the shape and position of the mask through controlling the position of those points - this process is known as parametric definision writing. If you wanted to change the width of the mask, you just change the points at the ends of the mask, the curves change, and the mask is updated to a completely new shape.

The final step in the process is to trim away some excess material to lower material and costs plus add our logo to the front. All the parts are sewn together to make a solid part ready for manufacturing.

The algorithm begins to plot a series of points in different spots on the face. These points serve as the basis to generate a series of curves. Those curves are than used to create the boundaries and shape definitions of the mask surfaces.

Cutting the basic surfaces of the mask with planes orientated in different directions we begin to figure out how to hollow out the interior of the mask for the pneumatic chamber.

02. CREATE CURVES

05. PNEUMATIC CHAMBER

01. MASK PLACEMENT

04. NASAL PLUGS

03. DYNAMIC GEOMETRY

06. FINISHING UP

custom fit cpap maskslos angeles, cametamason.com

TECHNICAL EXPLANATION07.03.2015

PAGE 06

MASK CREATION

Using the facial feature points from the 3d scan we begin to figure out where the mask should be placed onto the face

The nose tip, the nostril point, and the lower point of the nose form a triangle which allow us to figure out the nasal cavity. A series of iterations are made which get the curve closer and closer until the curve accurately contours the nasal cavity.

Since the whole algorithm begins with the placement of points on the face, we can dynamically change the shape and position of the mask through controlling the position of those points - this process is known as parametric definision writing. If you wanted to change the width of the mask, you just change the points at the ends of the mask, the curves change, and the mask is updated to a completely new shape.

The final step in the process is to trim away some excess material to lower material and costs plus add our logo to the front. All the parts are sewn together to make a solid part ready for manufacturing.

The algorithm begins to plot a series of points in different spots on the face. These points serve as the basis to generate a series of curves. Those curves are than used to create the boundaries and shape definitions of the mask surfaces.

Cutting the basic surfaces of the mask with planes orientated in different directions we begin to figure out how to hollow out the interior of the mask for the pneumatic chamber.

02. CREATE CURVES

05. PNEUMATIC CHAMBER

01. MASK PLACEMENT

04. NASAL PLUGS

03. DYNAMIC GEOMETRY

06. FINISHING UP

algorithm elements

Page 50: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

custom fit cpap maskslos angeles, cametamason.com

TECHNICAL EXPLANATION07.03.2015

PAGE 05

THE METAMASON APP

The metamason app easily walks the user through the mask creation process. In a step by step process, the interface guides the user through out all the customization options available and ensures a perfect fit.

The app can be made to work for a variety of devices. Initial development will be making a tablet version but eventually move to other platforms as needed to hit sales channels.

The metamason app will incorporate the scanning process and hardware support needed to get a quality 3d scan for mask creation. After the mask is made, all the manufacturing files are instantly created and sent securely to 3d printers for production.

OVERVIEW

MULTI-PLATFORM

SCAN TO MANUFACTURING

custom fit cpap maskslos angeles, cametamason.com

TECHNICAL EXPLANATION07.03.2015

PAGE 05

THE METAMASON APP

The metamason app easily walks the user through the mask creation process. In a step by step process, the interface guides the user through out all the customization options available and ensures a perfect fit.

The app can be made to work for a variety of devices. Initial development will be making a tablet version but eventually move to other platforms as needed to hit sales channels.

The metamason app will incorporate the scanning process and hardware support needed to get a quality 3d scan for mask creation. After the mask is made, all the manufacturing files are instantly created and sent securely to 3d printers for production.

OVERVIEW

MULTI-PLATFORM

SCAN TO MANUFACTURING

Page 51: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

NASAL FITTING ADJUSTMENT

ACCESSORY SELECTION

HOSE ADJUSTMENT

BRIDGE DESIGN

STRAP CONFIGURATION

STRAP PLACEMENT

respere features

Page 52: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

Page 53: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

m e t a m a s o n

input|scan

interface|fit

instantiate|print

Mm

open platform for mass-customization

Page 54: Inside 3 d printing   metamoderism, leslie oliver karpas (save small)

metamason, inc.TM © confidential and proprietary draft copy, for discussion only

130 w union st. pasadena, ca [email protected] | www.metamason.com | 415.694.8699

Leslie Oliver Karpasceo & founder

thank youby Leslie Oliver Karpas, ceo metamason inc

meta-modernism

[email protected] clara, ca fall 2015