Conveyor SafetyTeam

Splicing Team

Technical ServicesHead

Business Dev.Manager

Accounting &Taxes Head

Engineering & ProductDevelopment Manager

General Manager

Board of Directors

Dispatcher &Warehousing

Finance Staff

Finance & GASupervisor

SulawesiBranch

Tj. Enim SalesReps.

Admin & GAstaff

Sales Engineers

KalimantanBranch

GA & Secretary

Padang Branch

Costing & PlanningSupervisor

Field Engineer

Admin & InventoryStaff

ProductsSupervisor

Workshop Staff

Engineering Staff

EngineeringSupervisor

2013 - Organization Chart

Secretary

Drafter

Technician

Products Portfolio

Conveyor Product on Rotating Equipment: Pulleys, Idler Rollers, Tracking Rollers, Fence & Roofing

Conveyor Products; Pulleys, Idler Rollers, Rubber Rollers

Spillage Spillage

Belt SagBelt Sag Belt SagBelt Sag

IdlerIdler

Belt LineBelt Line

Belt Damage caused by CarrybackBelt Damage caused by CarrybackWorn top coverWorn top cover

CarrybackCarryback

If carryback is If carryback is allowed to build allowed to build up to a point up to a point where the belt where the belt slides through it, slides through it, the top cover the top cover may be worn may be worn away.away.

Belt

Stringer Return belt

Return roll

Do you experience with this fugitive material?

Return roll

Belt Cleaning Products

• As far forward (as close to the conveyor discharge) as possible.

• Positioned out of the material flow.• Designed to minimize risk to belt, splice,

and cleaner itself. • Designed for ease of maintenance,

including simple blade replacement and reduced frequency of re-tensioning

UNI® Belt Cleaners – Pre Cleaner Range

• As far forward (as close to the conveyor discharge) as possible.

• Positioned out of the material flow.• Designed to minimize risk to belt, splice,

and cleaner itself. • Designed to stand up to “worst case”

conditions.• Designed for ease of maintenance,

including simple blade replacement and reduced frequency of re-tensioning

UNI® V-PloughUNI® V-Plough

UNI® UNI® VV – – Ploughs provide constant protection against fugitive materials Ploughs provide constant protection against fugitive materials from entering into tail and take-up pulleys. from entering into tail and take-up pulleys. This V-Plough is specifically This V-Plough is specifically designed for conveyors with higher operating speeds. A self adjusting designed for conveyors with higher operating speeds. A self adjusting plough with a dual pole mounting configuration to help eliminate plough plough with a dual pole mounting configuration to help eliminate plough vibration usually associated with increased belt speed. vibration usually associated with increased belt speed. ThisThis Vee Ploughs use gravity to maintain constant conveyor belt contact Vee Ploughs use gravity to maintain constant conveyor belt contact whilst long life polyurethane blades reduce servicing requirements to a whilst long life polyurethane blades reduce servicing requirements to a minimum. minimum.

BELT SUPPORT improvementBelt sag allows spillage, material Belt sag allows spillage, material entrapment, and belt drainageentrapment, and belt drainage

UNI® Impact Bed Light Duty

UNI® Impact Bed Medium Duty

UNI® Hybrid Impact Bed for High Speed Application

UNI® Slot Roller

Metal Rain & Wind Cover Belt Conveyor

Corrugated, Modular/Segmented, Galvanized

Metal conveyor covers are the perfect solution to protect the material from rain and wind and to protect the environment from noise and dust. Metal covers are made of galvanized steel thickness of 0,75mm; they are self-standing, safe and very easy to assembly and disassembly. They do not require any maintenance and can be mounted on any conveyor with belt width from 400 to 1800mm.The biggest advantage is that they can be open on both sides, and for complete removal require only one person

Metal Wire Belt Conveyor Fence/Ornamesh

Low Carbon Steelwire (Electro Galvanized or Hot Dip Galvanized) Stainless Steel Wire Satefy Fence

Website: http://www.topnetting.com, Anping Hebei

Main customers:

•PT Freeport Indonesia•PT Nusa Halmahera Mineral•PT Indomuro Kencana Mining•PT Pama Persada •PT Thiess Contractor Indonesia•PT Arutmin•PT Jembayan Muara Bara•PT KPP Mining•PT MBSS •PT Semen Padang•etc

Belt Splicing, in preparation & execution

Installatioan Primary Belt Cleaner Pelita Samudera Shipping

PT.Indocement

PT.Bukit Asam

Splicing

PT.Gunung Garuda Steel

PT.Talenta Bumi

Kalimantan

WHY SUREGUIDE ?

Prevent belt damagePrevent Structural DamageReduce maintenanceReduce DowntimeSave MoneyTracking belts SINCE 1992

FlexibleFlexible Super-Screw fasteners are designed to follow belt movement around the pulleys

For heavy duty belts:Fasteners made of composite material with self tapping screws.Can be used also for the repair of holes and rips.

Material:Reinforced rubber corresponding to the various conveyor quality :wear resistant, heat resistant, oil resistant, fire resistant, white FDA and with textile on the bottom.

Installation:By using a electic screw driver or a hand brace or a pneumatic screw driver.