Embed Size (px)
DESCRIPTION
The motivating idea behind CloudFlow is to open up the power of Cloud Computing for engineering WorkFlows (CloudFlow). The aim of CloudFlow is to enable engineers to access services on the Cloud spanning domains such as CAD, CAM, CAE (CFD), Systems and PLM, and combining them to integrated workflows leveraging HPC resources. Workflows are of key importance in todays product/production development processes were products show ever increasing complexity integrating geometry, mechanics, electronics and software aspects. Such complex products require multi-domain simulation, simulation-in-the-loop and synchronized workflows based on interoperability of data, services and workflows.
Citation preview
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
CLOUDFLOW: COMPUTATIONAL CLOUD SERVICES AND WORKFLOWS FOR AGILE ENGINEERING
André Stork, CloudFlow Co-ordinator
Fraunhofer Institut für Graphische Datenverarbeitung IGD
Fraunhoferstr. 5
64283 Darmstadt
+49 6151 155 469
www.igd.fraunhofer.de
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
MOTIVATION
n The European manufacturing industry has: n innovative technology n quality processes n robust products
n these characteristics have leveraged Europe’s industrialization n but n the economic globalization has exposed Europe’s industry to new
emerging and industrialized manufacturing markets n the recent economic crisis has decelerated the internal boost and
investment n Hence, a new ICT infrastructure across Europe needs to be established to
re-inforce global competitiveness
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
Cloud Computing
IDEA
Cloud
Work Flow CAD
CAM CFD
Systems
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
Cloud Computing
Work Flow CAD
CAM CFD
Systems
IDEA
CAD
CAM CFD
Systems
Cloud
Flow
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
Cloud Computing
Work Flow CAD
CAM CFD
Systems
IDEA
CAD
CAM CFD
Systems
Cloud
Flow
CAD
CAM CFD
Systems CloudFlow
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
WHY WORKFLOWS?
n Complex products require … n development and simulation of
mechanics, software and electronics all together
n interactive simulation, simulation-in-the-loop and synchronized workflows based on interoperability of data, services and workflows
software
electronics
mechanics
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
AIMS
n CloudFlow enables engineers to access services on the Cloud spanning domains such as n CAD,
n CAM, n CAE (CFD),
n systems and
n PLM, and n combines them to integrated workflows
n leveraging HPC resources.
access use
view
CAD CFD
Systems CAM
PLM
HPC
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
S&T OBJECTIVES
n Data: cloud-based management of heterogeneous data and extended data interoperability
n Services: cloud-based computing services based on standard technologies and extended interoperability through semantic technologies
n Workflows: linking heterogeneous services along the engineering chain to integrated workflows to support multi-domain / multi- physics decision making in product and production design
n Users: flexible definition of workflows / single point of access n Business confirm and further analyse the value proposition,
Models: value chain, business models and deployment models for the optimal final exploitation of results
n Security: establish a security certification programme
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
TECHNICAL APPROACH
access use
view
CAD CAM CFD
Systems
PLM
n Standards-based n Standardized data exchange,
integration and archival based on STEP AP 209
n Open standards n i.e.OCCI for management,
CDMI for storage and AMQP will be adopted of CloudFlow components and services
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
EXPERIMENTS
n 6 experiments in 1st wave n CAD on the Cloud
n CAM on the Cloud n CFD on the Cloud
n PLM on the Cloud
n Systems simulation on the Cloud n Point clouds vs CAD comparison
on the Cloud
access
use
view
CAD CAM CFD
Systems
PLM
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
EXPERIMENTS
n CAD on the Cloud n Using a specific and expensive application
on a local CAD Software can be replaced by a Cloud service
n Service can work for a full process from the definition of the needs down to the manufacturing
n User can initiate the development of special services
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
EXPERIMENTS
n CAM on the Cloud n Using an external specific CAM module based on the Cloud allow users to
define complex parts according to their needs
n The Cloud allows services to be offered on the global market targeting niche CAM needs
n Using a specific and expensive in-house CAM software can be replaced by a Cloud service
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
EXPERIMENTS
n CFD on the Cloud n CFD cloud simulation enables the access to computational resources that
can otherwise not be made available in the company
n Allows casual CFD users to have timely access to CFD capabilities as well as externalized computer resources
n Accessing appropriate large resources on-demand
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
EXPERIMENTS
n PLM on the Cloud n Availability of visual inspection
removes the need to acquire, install and maintain sophisticated PLM and post-processing/visualization software
n PLM environment on the cloud provides a unified way of documenting the engineering process
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
EXPERIMENTS
n Systems simulation on the Cloud n Cloud technology allows the user to simulate the model from any computer
n Define variants and to parallelize the calculations by using more than one compute resource in the Cloud (ensemble simulations)
n HPC resources via Cloud services
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
EXPERIMENTS
n Point clouds vs CAD comparison on the Cloud n Manufacturing industry can tailor their
CAD/CAM and metrology solution by combining Cloud services best suited for the challenges
n Tailoring niche services in the Cloud addressing specific product classes
n Functionality can be reduced to a necessary minimum
n Avoiding comprehensive and often complicated user interfaces
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
OPEN CALLS
n 2 Open Calls n 7 new external experiments each
n Increasingly complex w.r.t. n data volume
n heterogeneity
n computation time n domain coverage
n interactivity n workflow integration
30. 6. 2014 30. 6. 2015 Open Call publication date:
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
CONSORTIUM
n SME driven n Missler
n JOTNE n Numeca
n ITI
n Arctur n StellbaHydro
n CARSA
access use
view
CAD CAM CFD
Systems
PLM
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
CONSORTIUM
n Research institution
access use
view
CAD CAM CFD
Systems
PLM
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
MISSION
Make Cloud infrastructures
a practical solution for manufacturing SMEs!
© www.eu-cloudflow.eu The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7-2013-NMP-ICT-FoF) under grant agreement n° 609100.
MANY THANKS!
