Repair Roof Waterproofing Membrane

  • View
    46

  • Download
    0

Embed Size (px)

DESCRIPTION

Case Study: Existing roof with a failed waterproof membrane causing water to penetrate rooms below. Spray applied Liquid Rubber can be used to over coat existing membranes rather than going to the expense and inconvenience of complete removal. This was successfully achieved by careful preparation and experienced application of cold spray application of a liquid waterproofing membrane.

Text of Repair Roof Waterproofing Membrane

  • PROBLEM: FAILURE OF EXISTING TORCH-ON SHEET MEMBRANE Case Study: Roof Remedial Waterproofing SOLUTION: SPRAY APPLIED LIQUID RUBBER MEMBRANE OVER EXISTING MEMBRANE . Joints, junctions & turn ups delaminated Water leaks & subsequent damage to rooms below This provides a seamless & flexible waterproof membrane without the need to remove the existing damaged surface.
  • The defective existing roof membrane prior to remedial work
  • The defective existing roof membrane prior to remedial work
  • Preparation: masking & detailing of existing delaminated joins
  • Preparation: masking & detailing of existing delaminated joins
  • Preparation: masking & detailing of existing delaminated joins
  • Fast spray application of Liquid Rubber covers existing membrane
  • Fast spray application of Liquid Rubber covers existing membrane
  • Liquid Rubber membrane replaces existing torch-on membrane
  • Seamless & Flexible Waterproofing Membrane
  • ABOUT LIQUID RUBBER Liquid Rubber ABOUT RUBBER MEMBRANE SYSTEM Liquid Rubber is designed to "hold" water and will not break down, like most conventional membranes often do. We further wish to advise that the Liquid Rubber Membrane System is SEAMLESS as it is sprayed out in one continuous layer - which does not leak after a period of cyclic movement.
  • Liquid Rubber unique properties One coat system Minimal surface preparation Environmentally friendly Non-Toxic Odourless High Puncture Resistance Seamless - no laps Fully Bonds to most substrates Does not track Ozone and UV resistant
  • Liquid Rubber Performance Benefits Superior Performing Membrane Bonds to most construction materials Seamless membrane- moves with substrate Against corrosion, water damage, chemical attack Elongates 800% with 95% recovery Withstands thermal cycling Puncture resistant Significant installation cost savings for customer Minimal surface preparation required One coat system Environmentally friendly and safe VOC free Non toxic
  • Phone: 03 8812 2918 Website: www.waterproofingfew.com.au Email: info@waterproofingfew.com.au F.E.W Waterproofing are Australian Certified Liquid Rubber Applicator