Painting formerly painted skirting boards

Start by relocating furniture right into the centre of the space to ensure that you have a great many space to function. Cover furniture experiencing a dust sheet. Now, you should sand the skirting to get rid of any type of flaking paint tips and rough up the aged paint or discolour a little to make sure that the brand-new paint will certainly adhere appropriately. This could be a fiddly task, particularly if your skirting is rather decorative, but for a good surface you must actually do it. Load any cracks, corners, nail openings and so on experiencing ideal filler and also sand when filler is dry.

When you've sanded all the skirting, vacuum and also clean down with a moist cloth. Now making use of a sugar soap solution, tidy the skirting well to eliminate any sort of staying fine dust or oil and enable to completely dry completely.

Lay newspaper or dust-sheets on the flooring to protect against spills. Stick a strip of concealing tape along the side of the carpet or carpeting, as near the skirting as feasible. Now take an item of card or plastic carpet guard as well as put it under the skirting so that there is no danger of fresh paint getting onto the floor surface. If you are not positive in cutting-in at the top edge of the skirting, after that also apply masking tape to the wall surface.

The process of Painting :

Start by cutting-in along the top of the skirting nearby the wall. Use a small amount of paint each time so as not to overload your brush. Brush from right to left adhering to any sort of grain (the reverse if you are left-handed. When you've cut-in an area along the top of the skirting, change to the bottom of the skirting and also do the exact same. Now you can fill out the mid area. Glide your piece of card or plastic guard along as you go.

Check for drips and spills using a damp fabric (water based paint-- use water, oil based paint-- use white spirit or turpentine) to clean off. Slowly move along the skirting boards, taking your time and also constantly being mindful of spills and also drips.

For a professional coating you'll need at least two coats. Enable the paint to dry totally then make use of a fine level sandpaper to lightly examine the skirting just before you begin on the second layer. Try to find any drips or bumps, making sure to sand them right down. Bear in mind to wipe over the skirting with a damp fabric after sanding to get rid of the thin dirt which will quit the next coat adhering as well as ruin the finish.

For further layers duplicate the same procedure. Keep in mind that several slim coats give a much better surface as well as offer far better protection than one or two thick ones.

Image source:www.upload.evocdn.co.uk

The Paint Shed has a huge variety of high quality paint appropriate for every single job around the residence-- and also at profession rates. Check-out our site for more specifics. Any kind of help or recommendations you may call for, just contact our professionals at The Paint Lost straight-- they'll only be too satisfied to give you their specialist point of view.