How To Unlock Blackberry bold 9900 and 9930 iUnlockBlackberry.com - 1

How To Unlock Blackberry bold 9900 and 9930 iUnlockBlackberry.com

This Tutorial is brought to you by iUnlockBlackberry.com click here to visit the site.Learn how to unlock blackberry bold 9900 and 9930

Step 1: Make sure the SIM Card is inserted

Step 2 : Go to 'Manage Connections' and Click on 'Turn All Connections Off'

Step 3: Select the Options icon.

Step 4: Scroll down and select "Device"

How To Unlock Blackberry bold 9900 and 9930 iUnlockBlackberry.com - 2

Step 5: Scroll down and select "Advanced Options"

Step 6: Scroll down and Select "SIM Card"

How To Unlock Blackberry bold 9900 and 9930 iUnlockBlackberry.com - 3

Step 7: Now you will see some text on screen.

Step 8: Enter via the Keypad "MEPD"

(NOTE: you might need to type in caps, also letters will not appear on-screen but you will be presented with personalization screen, that will display 5 locks such as network, service provider etc)

Step 9: The Display should show "SIM Card: Security Disabled" and should either show "Network" as "Active"

How To Unlock Blackberry bold 9900 and 9930 iUnlockBlackberry.com - 4

Step 10: Type MEP2 (make sure to hold ALT for 2) or hold ALT and type MEPE

Step 11: The Phone will prompt to "Enter Network MEP Code (X left) (X = number of tryies left to enter Unlock Code)

NOTE: if you have only 1 try left, STOP! don't enter the code, contact iunlockblackberry.com for further assistance. if you have 0 tries left, you phone is hardlocked and can not be unlocked by IMEI.

Step 12: Enter the Unlock Code "MEP2 Unlock Code" and select Enter by pressing the Center button

If you also have a MEP4 code, type ‘MEP4′ (you will be prompted to enter MEP code)Enter the MEP4 code (CONFIRM you get “Code Accepted” message)

How To Unlock Blackberry bold 9900 and 9930 iUnlockBlackberry.com - 5

Step 13: The Phone will display "Code Accepted". In case you get a "Code Error", STOP! do NOT enter your code again. contact us for further assistance.

Step 14: Your Blackberry is Unlocked. The Phone will return to previous screen and Display all Locks as Disabled or Inactive

Step 15: Reboot device by pulling battery out, Go to "Manage Connections" Click on ‘Restore Connections’

Verizon phones only: You might need to remove “Activation Required” on the screen or change the Phone Number to yours by following steps below:

1. Press Call (Green Button) as you would to place a call2. Type on the screen: ##0000003. Press the Call Button4. You will be prompted to the screen with the phone number, change existing phone number to

yours5. Press the Menu Button to Save the options and the phone will automatically restart6. After restarting, it will be updated