Talked with facilitator about how we are going to build project.

Drafted Project a couple of times and bought electronics.

Gathered all the necessary materials for the project.

Measured all of the wood that needed to be cut.

Began cutting materials for speaker box.

Started piecing the speaker box together before gluing and nailing it.

Started gluing pieces together.

Began nailing the speaker box together

Began cutting out holes for speakers.

Finished cutting holes out and sealed entire box.

Finished completely sealing the speaker box up from the outside.

Finished speaker box

Started piecing acrylic together.

Finished putting sides on acrylic box and started measuring for the ends of the box.

Cut and bent the two metal legs for the speaker box.

Finished sides of box and put the door on

Finished putting weatherstripping on the box.

Finished box and wired everything.

Finished and tested project.