13
1 California WMA Workshop June 26-27, 2013

#5 status of implementation

Embed Size (px)

DESCRIPTION

Warm Mix Asphalt training documents provided by the National Center for Asphalt Technology (NCAT) for classes held June 26 & 27, 2013 in California, sponsored by the California Asphalt Pavement Association (CalAPA).

Citation preview

Page 1: #5 status of implementation

1

California WMA Workshop

June 26-27, 2013

Page 2: #5 status of implementation

2

Overview

WMA

RAP

RAS

Combinations

Page 3: #5 status of implementation

3

Sources of Info for WMA

NAPA Survey for WMA, RAP, RAS for years 2009, 2010, and 2011

NAPA: WMA Best Practices Manual

First and Second International Conference on WMA

NCAT website: ncat.us

warmmixasphalt.com

WMA producers

Page 4: #5 status of implementation

4

Estimated WMA Production

0

5

10

15

20

25

30

35

2009 2010 2011

WM

A U

sage

(%

)

State

Other Govt.

Non-Govt.

77.9%

19.6%

2.3% 0.2%

Water-injection foaming

Chemical additive

Foaming additive

Organic additive

Page 5: #5 status of implementation

5

WMA in 2011 (NAPA)

Page 6: #5 status of implementation

6

Challenges for WMA 1. Keeping track of new WMA Technologies

2. Definition of WMA

3. Developing a Mix Design Process that works for all WMA Technologies

4. Improving plant burner efficiencies

5. Lab tests that contradict field performance

Page 7: #5 status of implementation

7

RAP usage in US (NAPA)

Page 8: #5 status of implementation

8

RAP Usage (NAPA)

Year RAP Usage

2009 16%

2010 18%

2011 19%

Goal 25%

Page 9: #5 status of implementation

9

Challenges for higher RAP contents

1. Determining the best way(s) to reduce cracking potential

2. Training mix designers and specifiers on use of high RAP content mixes

3. RAP handling procedures especially for higher RAP

Page 10: #5 status of implementation

10

RAS usage in US

Page 11: #5 status of implementation

11

RAS usage (NAPA)

RAS Usage

Year (Thousand tons)

2009 701

2010 1099

2012 1192

Page 12: #5 status of implementation

12

Challenges for RAS

1. Determining the best way(s) to reduce cracking potential

2. Getting more states to allow RAS

3. Training mix designers and specifiers on use of RAS mixes

4. RAS handling

Page 13: #5 status of implementation

13

Questions ?