18
Component Sizing of Plugin Hybrid Electric Vehicle for Sub-Optimal Fuel Efficiency and emissions Submitted By: Mohit Suri

Mohit+suri presentation

Embed Size (px)

Citation preview

Page 1: Mohit+suri presentation

Component Sizing of Plugin Hybrid Electric

Vehicle for Sub-Optimal Fuel Efficiency and

emissions

Submitted By:Mohit Suri

Page 2: Mohit+suri presentation

Plug-In Hybrid Electric Vehicle

Has an External Port for charging the Vehicle.

Can be charged from wall socket. During Starting, if SOC is low external

power source may charge the battery instead of engine.

Can have an On- board Charger to increase the range.

Two types-Parallel and Series.

Page 3: Mohit+suri presentation

Series Plug-in HEV

Page 4: Mohit+suri presentation

Autonomie - A simulation tool Autonomie is a Plug-and-Play Vehicle

Model Architecture and Development Environment.

Math-based simulation environment. Autonomie is an open architecture to

support the rapid integration and analysis of powertrain/propulsion systems.

The software has been developed by Argonne labs

Page 5: Mohit+suri presentation

Autonomie-GUI

Page 6: Mohit+suri presentation

Strategy and Cost function Initially Particle Swarm Optimization was proposed

to be used. Used Trail and Error technique to successfully

optimize the Cost function. The Cost Function here is Improving Fuel

Economy and reduce emissions. Cost Function = , X = Where, Nbm = number of battery modules Cf = fuel consumption Pm = Motor Power Pe = Engine Power

Page 7: Mohit+suri presentation

Model Configuration

Page 8: Mohit+suri presentation

Flow Chart

Page 9: Mohit+suri presentation

Sizing Engine Initially Engine size was to deliver

57KW of the power. Values of the Engine power were varied

between 60 and 46 KW. Simulation Showed that 48KW gave the

best fuel Economy. Engine Size with 48KW was taken as

optimized result on basis of Trial and Error.

Page 10: Mohit+suri presentation

Optimized Engine Power-Results

Page 11: Mohit+suri presentation

Best Results

Engine, Traction Motor, Motor 2 Power Vs Time

Battery Power Vs Time

Page 12: Mohit+suri presentation

Sizing the Motor Traction Motor plays a vital role in

improving the fuel economy of vehicle. Size of traction Motor was varied from

45 KW to 60KW. Motor with 52 KW came out to be the

best size for best fuel economy. Similarly Motor 2 Size was varied from

30 to 45 KW with best size being 33KW.

Page 13: Mohit+suri presentation

Optimized Traction Motor Power-Results

Page 14: Mohit+suri presentation

Battery, Motor Power Vs Time

Engine, Motor Power Vs Time

Best Results

Page 15: Mohit+suri presentation

Sizing the Battery Battery Series parallel Configuration

was changed to get optimized Results. The Series/parallel cell configuration

was tried and results were obtained. Battery power of 5.8KWh was optimum.

SOC Vs Time

Page 16: Mohit+suri presentation

Changing Kp and Ki Kp and Ki Are the controller gains. Individual parametric study was done. Best values were selected to get

optimum values.

Page 17: Mohit+suri presentation

Best Optimum ResultsPlugging in the Optimized values and getting optimum result.

Page 18: Mohit+suri presentation

Thank You