Design & EngineeringBE-102

Naseel Ibnu Azeez.M.PAsst. Professor,Dept. of Mechanical Engineering,MEA-Engineering College,Perinthalmanna.Email: naseel@live.com

Design SpaceThe set of all possible designs is an n-dimensional hyperspace called a design space

Where, n= The number of different engineering characteristics it takes to fully describe the design

• Each state is a different conceptual design. The space has a boundary that encloses only the feasible designs, many of which are unknown to the designer

• The space is more than three dimensions because there are so many characteristics that can categorize a design (e.g., cost, performance, weight, size, etc.)

feasible designs created in response to the articulation of a design task is pictured as a problem space or a design space that consists of states as shown in Fig.

Design Space Analogy

A stationary solar system is a useful analogy for a design space

A stationary solar system is a useful analogy for a design space.

Each planet or star in the system is different from the others. Each known body in the space is a potential solution to the design task. There are also a number of undiscovered planets and stars. These represent designs that no one has articulated. The vastness of outer space is also a good analogy for a design space.

There are many, many, many, different solutions for any design problem. The number of potential solutions can be as high as the order of n where n is equal to the number of different engineering characteristics it takes to fully describe the design.

Design Process

Designs did not miraculously appear but originated in the minds of human beings and took time to develop. Engineering is the creative process of turning abstract ideas into physical representations (products or systems).

‘There are scientific methods that everyone can adopt to develop

optimised DESIGNS’

Design Process1. Define the Problem2. Generate Concepts3. Develop a Solution4. Construct and Test a

Prototype5. Evaluate the Solution6. Present the Solution

• Identify a problem• Validate the problem

– Who says it is a problem?– Needs and wants– Prior solutions

• Justify the problem– Is the problem worth solving?

• Create design requirements (specifications)– Criteria and constraints

• Design Brief

Define the Problem

Define the Problem• Design Brief

– A written plan that identifies a problem to be solved, its criteria, and its constraints.

– Used to encourage thinking of all aspects of a problem before attempting a solution.

• Identify a problem• Validate the problem

– Who says it is a problem?– Needs and wants– Prior solutions

• Justify the problem– Is the problem worth solving?

• Create design requirements (specifications)– Criteria and constraints

• Design Brief

Define the Problem

In some cases, if the problem is not valid or justifiable, the designer must define a new problem.

• Research• Brainstorm possible

solutions• Consider additional design

goals• Apply STEM principles• Select an approach• Decision Matrix

Generate Concepts

• Decision Matrix− A tool used to compare

design solutions against one another, using specific criteria.

Generate Concepts

• Research• Brainstorm possible solutions• Consider additional design

goals• Apply STEM principles• Select an approach• Decision Matrix

Generate Concepts

If the technology necessary to develop the solution does not exist, scientific research may be necessary to pursue a solution.

Develop a Solution• Create detailed design

solution• Justify the solution path• Technical Drawings

Develop a Solution• Technical Drawings

– Drawings that provide technical information necessary to produce a product.• material, size, shape• assembly, if necessary

Develop a Solution• Select an approach

– Decision Matrix• Create detailed design

solution– Technical Drawings

• Justify the solution path

If a solution is found to be invalid or cannot be justified, the designer must return to a previous step in the design process.

• Construct a testable prototype

• Plan prototype testing– Performance– Usability– Durability

• Test prototype – collect test data– analyze test data

• Test Report

Construct and Test a Prototype

Prototyping: The first stage of testing and implementation of a new product, called prototyping, consists of building a prototype of the product-the first fully operational production of the complete design solution. A prototype is not fully tested and may not work or operate as intended. The purpose of the prototype is to test the design solution under real conditions.

Aircraft wind tunnel test

• Construct a testable prototype

• Plan prototype testing– Performance– Usability– Durability

• Test prototype – collect test data– analyze test data

• Test Report

If a testable prototype cannot be built or test data analysis indicates a flawed design, the designer must return to a previous step of the design process.

Construct and Test a Prototype

Evaluate the Solution• Evaluate solution

effectiveness• Reflect on design

– Recommend improvements• Optimize/Redesign the

solution– [Return to prior design

process steps, if necessary]– Revise design documents

• Project Recommendations

Evaluate the Solution• Evaluate solution

effectiveness• Reflect on design

– Recommend improvements• Optimize/Redesign the

solution– [Return to prior design process

steps, if necessary]– Revise design documents

• Project Recommendations

Evaluate the Solution

Does the solution solve the problem?

If not, the designer must return to a previous step of the design process.

• Document the project– Project Portfolio

• Communicate the project– Formal Presentation

Present the Solution

Design Process

• Iterative

Product improvement or redesign will require the designer to repeat the design process.

A Design Process

Product Innovation

1. Define a Problem2. Brainstorm Possible Solutions

3. Generate ideas

4. Research Ideas & Explore Possibilities

5. Specify Criteria & Identify Constraints

6. Consider Alternative Solutions7. Select an Approach

8. Develop Written Design Proposal

9. Prototype

12. Communicate Results

10. Test & Evaluate11. Refine/Create

Detailed Design Process

Product Development Process

Reference• George E Dieter, Linda C. Schmidt- Engineering Design• Dym, C. L., Little, P. and Orwin, E. J., Engineering Design - A

Project based introduction-Wiley• Haik, Y. And Shahin, M. T., Engineering Design Process, Cengage

Learning• Balmer, R. T., Keat, W. D., Wise, G., and Kosky, P., Exploring

Engineering, Third Edition: An Introduction to Engineering and Design

• V.B Bhandari- Design of Machine Elements• Donald A Norman- Living With Complexity• Jorma Tuomaala- Creative Engineering Design• Don Norman- Design of everyday things

www.slideshare.net/naseelazeeniya