6 Things you Need to Know About Water Main Breaks

Water main breaks are common in Manhattan and cause a lot of suffering. Here are six things you need to know about this problem:

Holes and Cracks in Pipes

The water comes up to the surface due to holes and cracks in pipes. Only after the break is controlled, the water continues to flow out under pressure.

Corrosion of Manhattan Pipes

External corrosion is the main cause of water main breaks in the city. Extreme cold weather puts the pipes under pressure causing old pipes to crack.

Cold Weather Causes Main Breaks

Frost that penetrates deep into the ground in winters can cause the pipes to crack. It is difficult to drain water in winters. Street flooding affects traffic.

Controlling Leaks

Leaks have to be controlled to eliminate the risk to public safety, and private and public property. The contractors have to look for the valves to close it.

The City Needs to be Contacted

The city allow for digging into the ground without any damage to other services or causing risk to public safety.

Repairs have to be Taken Care of EfficientlyElectronic leak detector is used to

identify the location of the leak. The ground is dug up to identify its cause. Repair clamps or a length of the pipe is replaced.

Now that you know more about the water main break in Manhattan, you can better understand how it is fixed.