The process of gathering, compiling, drafting, and editing in creation of a News Paper.

This is done by imprinting the news and all its contents in papers and distributed afterwards produced in hard copies created for publication.

News Paper production are delegated all through different departments

Each makes significant roles to make every parts of the Publication informative, concise, beneficial and interesting for the readers.

The divisions in production make a one good outcome with one goal, - to provide quality News Publication

Once you sell an ad, there are almost always people at your publication who will take your rough sketch or an existing ad you've made changes to, and build a finished, ready-for-publication Ad.

At your newspaper, this department is probably called  ProductionProduction. When these people aren't creating the "live" ads that you've already sold, they are often willing to create spec ads for you, as long as it doesn't interfere with their primary objective of getting the sold ads finished and into the newspaper.

-is the composition of text by means of types

Typesetting requires the prior process of designing a font and storing it in some manner.

Typesetting is the retrieval of the stored letters (called sorts in mechanical systems; and glyphs in digital systems) and the ordering of them according to a language's orthography for visual display.

The manuscript and the design\brief will be sent to a typesetter,

who will take the text and illustrative material, setting it out

on the page ready for printing.

Both have their origins Both have their origins in the in the Gutenberg Gutenberg revolution revolution and each, in their different and each, in their different ways, were concerned with ways, were concerned with the presentation of textual the presentation of textual material in type format ready material in type format ready for printing.for printing.

Typography was the art of designing, setting and arranging type whereas Typesetting was the process (or craft) of actually setting the type.

Note the class difference: Typography wore a beret and twirled a designer’s pen, Typesetting wore an apron, punched type and had ink on its fingers

Completed, or camera-ready, pages are known as mechanicals or mechanical art. In the offset lithography process, the mechanicals would be photographed with a stat camera to create a same-size film negative for each printing plate required

Paste up was preceded by Paste up was preceded by hot typehot type  and and cold type technologies technologies

This is a large bellows-type camera which consists of the copy-board,

bellows and lens, and film board. The vertical type can take up relatively

little space, while the horizontal fills two rooms; bellows, lens, and copy board on one side of the wall; film board and darkroom on the other.

The type of film used is black and white "orthochromatic"; i.e., it is more sensitive to

some colors than others. Guidelines, or "keylines" are created in light blue which

read as white; while anything red or close to a red hue appears as black. The stat camera

would be used to shoot color separations (using hue filters for each of the four process

colors) and to produce halftone film for printing using a special reticulated gel mask

For color processes, an individual black and white, "screened" negative is used to represent each color in a four-colour process (Cyan, Magenta, Yellow and Black) to be printed on a printing press.

The process of stripping for general commercial offset printing has largely been eliminated through the use of digital prepress technology, in which imposition software is used to "digitally strip" the pages together.

Some printing technologies continue to use stripped film, especially in silk-screen printing, although this is likely to change in the near-term.

The digital product of this imposition software can be outputted to an image setter that creates a single, composed piece of film, or directly to a plate setter which generates a plate that can go directly to press

Refers as the structure of plantation where the production of Newspapers takes place. Heavy equipments required for printing press stands inside the manufacturing factory of publication. Skilled individuals, employees and Departments involved in the making of Newspapers are all in this place as the main place in printing production.