LATEST CCNA 200-120 Pass4sure + Actual Test

PASS4SURE 200-120

CCNA Routing and Switching

https://www.pass4sures.com/200-120.html




INTERCONNECTING CISCO NETWORKING

DEVICES: ACCELERATED (CCNAX) 2.0

EXAM

The 200-120 CCNA exam is the composite exam associated with the CCNA Routing and Switching

certification. Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices:

Accelerated (CCNAX) course. This exam tests a candidate's knowledge and skills required to install,

operate, and troubleshoot a small to medium-size enterprise branch network. The topics include all the

areas covered under the 200-120 CCNA exam.

The following topics are general guidelines for the content likely to be included on the 200-120 CCNA exam.

However, other related topics may also appear on any specific delivery of the exam. The guidelines below

may change at any time without notice in order to better reflect the contents of the exam and for clarity

purposes.





RECOMMENDED 200-120 CCNA TRAINING

Interconnecting Cisco Networking Devices: Accelerated (CCNAX)

Cisco E-Learning for CCNA Routing and Switching

Cisco Learning Labs

Cisco Certification Practice Exam by MeasureUp: CCNA Routing and Switching (200-120)

CCNA and CCNP Premium Training Package

Courses listed are the recommended training for this exam and are offered by Cisco Learning

Partners, the only authorized source for Cisco IT training delivered exclusively by Certified

Cisco Instructors. Check the Global Learning Partner Locator for a Cisco Learning Partner

near you.200-120 CCNA exam





CISCO CCNA (200-120): THE

COMPLETE COURSE

This course is over 24+ hours in length and will cover all the needed subjects to

be successful in passing your CCNA 200-120 exam; also the knowledge and

practice labs acquired in this course will be transferable to real world use as a

Cisco professional.





BASIC UNDERSTANDING OF

NETWORKING

Basic understanding of Networking

Cisco Packet Tracer or similar simulators

A CCNA Study Guide book would be helpful

Desire to pass the CCNA certification exam

What am I going to get from this course?

Over 120 lectures and 25 hours of content!

This is a complete & comprehensive CCNA (200-120) Course. It is designed to prepare the

student to be able take the certification exam.

Once you finish this course, the student will not only have the confidence to take and be able

to pass the test, but they should be able to transfer the knowledge acquired to a networking

environment.

Understanding the concepts as provided in this course is an essential part of any network in

order to communicate and transmit information. Mastering this knowledge will make the

student or IT Professional a much more valuable asset in any Network or IT environment.





WHAT IS THE TARGET AUDIENCE?

This course is intended for anyone that is preparing for a network certification

or Computer Science Degree. However, it does go beyond that, it is also

intended for those Networking and/or IT Professionals that are already in the

field and need a better understanding of networks.

What you get with this course?





Topic 1, Operation of IP Data Networks

Question No : 1 DRAG DROP - (Topic 1)

Answer :

CISCO 200-120 : PRACTICE TEST






What are three benefits of implementing VLANs? (Choose three.)

A. A higher level of network security can be reached by separating sensitive data traffic from other network traffic.

B. A more efficient use of bandwidth can be achieved allowing many physical groups to use the same network

infrastructure.

C. A more efficient use of bandwidth can be achieved allowing many logical networks to use the same network

infrastructure.

D. Broadcast storms can be mitigated by increasing the number of broadcast domains, thus reducing their size.

E. Broadcast storms can be mitigated by decreasing the number of broadcast domains, thus increasing their size.

F. VLANs make it easier for IT staff to configure new logical groups, because the VLANs all belong to the same broadcast

domain.

G. Port-based VLANs increase switch-port use efficiency, thanks to 802.1Q trunks.

Question: 2 (Topic 2)

Topic 2, LAN Switching Technologies

Answer : A,C,D





Question No : 3 DRAG DROP - (Topic 4)

Answer :

CISCO 200-120 : PRACTICE TEST Topic 4, IP Routing Technologies

http

s://ww

w.p

ass4

sure

s.com

/200

-120.h

tml





What is the meaning of the output MTU 1500 bytes?

A. The maximum number of bytes that can traverse this interface per second is 1500.

B. The minimum segment size that can traverse this interface is 1500 bytes.

C. The maximum segment size that can traverse this interface is 1500 bytes.

D. The minimum packet size that can traverse this interface is 1500 bytes.

E. The maximum packet size that can traverse this interface is 1500 bytes.

F. The maximum frame size that can traverse this interface is 1500 bytes.

Question No : 4 - (Topic 4)

Answer: E

Refer to the exhibit.







What Netflow component can be applied to an interface to track IPv4 traffic?

A. flow monitor

B. flow record

C. flow sampler

D. flow exporter

Answer: A

Topic 7, Troubleshooting







Scenario

Refer to the topology. Your company has decided to connect the main office with three other

remote branch offices using point-to-point serial links. You are required to troubleshoot and

resolve OSPF neighbor adjacency issues between the main office and the routers located in

the remote branch offices.



































































An OSPF neighbor adjacency is not formed between R3 in the main office and

R5 in the Branch2 office. What is causing the problem?

A. There is an area ID mismatch.

B. There is a PPP authentication issue; a password mismatch.

C. There is an OSPF hello and dead interval mismatch.

D. There is a missing network command in the OSPF process on R5.

Answer: C







Scenario

Refer to the topology. Your company has connected the routers R1. R2. and R3 with serial links. R2

and R3 are connected to the switches SW1 and SW2, respectively. SW1 and SW2 are also

connected to the routers R4 and R5. The EIGRP routing protocol is configured. You are required to

troubleshoot and resolve the EIGRP issues between the various routers. Use the appropriate show

commands to troubleshoot the issues.





































The loopback interfaces on R4 with the IP addresses of 10.4.4.4 /32, 10.4.4.5/32.

and 10.4.4.6/32 are not appearing in the routing table of R5 Why are the

interfaces missing?

A. The interfaces are shutdown, so they are not being advertised.

B. R4 has been incorrectly configured to be in another AS, so it does not peer

with R5.

C. Automatic summarization is enabled, so only the 10.0.0.0 network is displayed.

D. The loopback addresses haven't been advertised, and the network command

is missing

on R4.

Answer: B







Answer: B

Topic 8, WAN Technologies

A network administrator needs to configure a serial link between the main office and a

remote location. The router at the remote office is a non-Cisco router. How should the

network administrator configure the serial interface of the main office router to make the

connection?

A. Main(config)# interface serial 0/0 Main(config-if)# ip address 172.16.1.1

255.255.255.252 Main(config-if)# no shut

B. Main(config)# interface serial 0/0 Main(config-if)# ip address 172.16.1.1

255.255.255.252 Main(config-if)# encapsulation ppp Main(config-if)# no shut

C. Main(config)# interface serial 0/0 Main(config-if)# ip address 172.16.1.1

255.255.255.252 Main(config-if)# encapsulation frame-relay Main(config-if)#

authentication chap Main(config-if)# no shut

D. Main(config)# interface serial 0/0 Main(config-if)#ip address 172.16.1.1

255.255.255.252 Main(config-if)#encapsulation ietf Main(config-if)# no shut







Answer: A

Topic 9, Mixed Questions

Which technology allows a large number of private IP

addresses to be represented by a smaller number of public

IP addresses?

A. NAT

B. NTP

C. RFC 1631

D. RFC 1918







Answer: A

What is the danger of the permit any entry in a NAT access list?

A. It can lead to overloaded resources on the router.

B. It can cause too many addresses to be assigned to the same interface.

C. It can disable the overload command.

D. It prevents the correct translation of IP addresses on the inside network.





Pass4Sure 200-120 Testimonial

Thank You! I would just like to thank

pass4sures.com for the Cisco CCNA 200-120 test

guide that I bought a couple months ago and I took

my test and pass overwhelmingly. I completed the

test of 365 questions in about 90 minutes I must say

that their Q & A with Explanation are very amazing

and easy to learn.

“Jamie Lloyd”





Become Certified from Pass4Sures.com





Education

LATEST CCNA 200-120 Pass4sure + Actual Test