Physical Regions FoldableInstructions may contain flappydudes.

Use entire sheet of manila

tagboard

Step 1 — Pinch in half on top and bottom

Step 2 — Fold both sides to pinch

Step 3 — Crease both folds

Step 4 — Measure 1 inch from

top

Step 5 — Mark 3 to 4 places top left, top right, and

top middle

Step 6 — Connect dots with a ruler and a pencil line

Step 7 — Cut on line only on the front to the edge and

stop

Step 8 — Fold up from

bottom

Step 9 — Pinch both bottom

corners

Step 10 — Draw line between

pinches

Step 11 — Cut to edge on front only

Step 12 — Fold up from bottom

Step 13 — Pinch both bottom corners

Step 14 — Draw line

Step 15 — Cut to edge on front only

Step 16 — Measure

flappydudes

Step 17 — Use that measurement to mark and draw

lines on the top section

Step 18 — Cut to edge on front only

Step 19 — Make the stand-alone heading by cutting

off the top 1 inch flappydudes along the fold only

Finished Flappydude ShellAdd some physical landform region information.