Template test scenario
Template test scenario
1 Test scenario
1.1 Test basis
Document
Author
Date
Version
1.2 The requisites
To start the test execution the following matters need to be present:
Minimal system requirements:
System configuration:
1.3 Product risks (from MTP)
2 Test scenario2.1 Intake test environment
An important stage in the test process is the test environment intake. This can be determined per environment or for the DTAP as a whole. For DTAP the table below needs to be filled in for every environment.
Test environment: D/T/A/P *
Platform
Program
Database
Service
Workstation *
Name
Authorization requested
(date)
Name applicant
Name manager
Authorization delivered (date)
Username
(password)
valid from/to
Does it work correctly? Yes/No
Pre-migration
Platform
Program
Database
Service
Workstation
Post-migration
Platform
Program
Database
Service
Workstation
* fill in what is called for
2.2 Pretest
Name test script:
Which test cases:
Tested product risks:
Date execution:
Number of defects:
Defects related to the test configuration:
Defect
Solution
Go/No Go moment for continuing the test process.
2.3 1st test round
In the table below the executed tests are listed in logical order. It is important to keep this order during the test execution.
Nr.
Name test script
Test level
Which tests?
Tested product risks
Start date
Expected end date
% done
Number of defects
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2.4 2nd test round
In the table below the executed tests are listed in logical order. It is important to keep this order during the test execution.
Nr.
Name test script
Test level
Which tests?
Tested product risks
Start date
Expected end date
% done
Number of defects
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Release advice:
Sogeti Nederland B.V.1.0 1
Augustl 20, 2008