HIGH EFFICIENCY CARTRIDGE DUST
COLLECTORS FOR THERMAL CUTTING INSTALLATIONS: PLASMA, OXY AND LASER CUTTING
Specialists in suction tables and cartridge
dust collectors for thermal cutting
since 1981
DUST
EMISSIONS
FILTERING
EFFICIENCY
COMPACT
FEAUTURE
Always guaranteed < 8.5 * 10-4 gr/ft³. Tests made on working installations showed that those values are even included between 2,12 and 4,25 * 10-4 gr/ft³.
Constant and guaranteed during the whole cartridge life at 99,999% on par-ticles up to 1.97 * 10-5 in.
The filtering media’s features and building technology together with the really wide filtering surface of each cartridge (226 ft2) assure in standard models almost a 40% space gain, compared with conventional dust collector having the same capacity.
AUTOMATIC
CLEANING
It is performed through compressed air jets acting in countercurrent, automatically activated by the efficient system called Delta P Board. A pressure gauge placed inside the filter surveys the clogging level of the cartridges sending the value to the Delta P board.
Almost unnecessary until the cartridges’ replacement. Anyway, it is extremely simple and quick, with a great reduction in standstill times (nearly 70% less than traditional dust collectors).
MAINTENANCE
SIDEROS ENGINEERING USA - 265 Eastchester Dr - Suite 133-303 HIGH POINT, NC 27262 — U.S.A.
Tel.: +1 336-882-4490 Fax: +1 336-882-4491 [email protected] www.siderosonline.com
Made of plain cellulose, « Top Grade » cartridges are treated in order to combine a structuraly stable filtering substatum with a thin layer of ultrafine fibers which are able to block submicron particles on the media’s outer surface. Average cartridge lifespan: about 4.000 workhours.
MODEL N° OF
CARTRIDGES CAPACITY
ft³/min WEIGHT
(lb)
FILTERING SURFACE
(ft2)
ECO 2C 2 1,100 710 452
ECO 4 HC 4 1,200 ÷ 1,800 1100 904
ECO 6 HC 6 1,800 ÷ 2,700 1450 1,356
ECO 9 CT 9 2,700 ÷ 4,000 2900 2,034
ECO 12 CT 12 3,600 ÷ 5,400 3300 2,712
ECO 16 CT 16 4,700 ÷ 6,500 4000 3,616
ECO 24 CT 24 ≥ 6,500 5250 5,424
CARTRIDGES
STANDARD
PRODUCT RANGE
“R” RANGE Reinforced version of standard dust collectors designed for applications with explosion risk, like aluminium or light alloys cutting.
Recommended
