Download pdf - Service Bulletin No. 2926 - Pre-Owned Coach Search | …service.mcicoach.com/ServiceInfo/ServiceBulletins.nsf/656d2ee39f... · service bulletin no. 2926 model ... mci’s liability

Printed in Canada

Service Bulletin No. 2926MODEL TYPE SECTION/GROUP DATE

SUBJECT

CONDITIONS

Feb. 8, 2006

MCI FLEET SUPPORT TRAINING PROGRAM FOR 2006

Service Information OnlyService InformationD4000 / D4005 / D4500 /D4505 / E4500 / J4500

Motor Coach Industries is pleased to announce the Fleet Support Training Program for 2006. This Training Program,located in Illinois, Ohio, New Jersey, Texas, Tennessee, Florida, California, Quebec, British Columbia and Manitobais intended to give the participants the necessary knowledge to properly repair and maintain D4000, D4005, D4500,D4505, E4500 and J4500 model coaches.

PURPOSE:The intent of this Training Program is to provide the participants with a basic understanding of theMCI coach systems.The skills required of your technicians are constantly changing to meet the challenges of ever-changing technology.Component locations and descriptions, system function and operation, troubleshooting techniques and minormaintenance will be discussed. MCI training provides an effective mix of theory-based classroom instruction andpractical, hands-on learning with MCI instructors that are industry experts with real world service experience and areknowledgeable in the latest skill-based instructional techniques. Training material and information packages will beprovided andmaybe taken home by the participants. Although the training is geared towardsmaintenancepersonnel,mechanically-inclined drivers, driver trainers or operations staff may also benefit.

NEW FOR 2006:New courses and four new course locations have been added.Spanish-language courses offered in select locations.

Custom designed training courses, tailored specifically to your fleet and conducted at your site, are available.

©2006 Motor Coach Industries International, Inc. and its subsidiaries. All rights reserved.

USAIllinoisMCI Fleet Support Service Center10 E. Golf RoadDes Plaines, IL 60016800-743-3624

OhioMCI Fleet Support Service Center219 West Campbell StreetLoudonville, OH 44842877-754-4404

MinneapolisC&J Bus Repair9010 Pillsbury Ave. Bloomington, MN 55420952-881-0034

New JerseyMCI Fleet Support Service Center14 Harmon DriveBlackwood, NJ 08012800-262-1287

TexasMCI Fleet Support Service Center9787 Clifford DriveDallas, TX 75220800-248-4942

Tennessee MCI Fleet Support Service Center 215 Maddox Simpson Parkway, Lebanon, TN 37090800-927-5041

FloridaMCI Fleet Support Service Center3718 LB McLeod RoadOrlando, FL 32805800-390-0287

CaliforniaMCI Fleet Support Service Center10850 Portal DriveLos Alamitos, CA 90720800-777-4101

CANAdAMCI Fleet Support Service Center1400 Barre StreetMontreal, QC H3C 1N4800-663-3328

MCI LTD1475 Clarence Ave.Winnipeg, MB R3T 1T5800-241-2947

Western Bus Parts and Service95 Philip AveNorth Vancouver, BC V7P 2V5604-980-4844

New advanced courses

Expanded course locations

Course Locations

Motor Coach Industries TechnicAL Training Institute

2006 Schedule

Learn from experienceDedicated to advancing the skill levels of motor coach operator’s technicians, MCI Fleet Support training program for 2006 includes:

➤ New courses added

➤ Basic and advanced courses in maintenance and repair covering new technologies including electrical, ABS, steering and suspension systems for all current production MCI coach models

➤ Experienced instructors, with advanced-track courses taught by MCI’s top technical pros

➤ Hands-on learning environments for all basic as well as complex skills

➤ Certification awarded to successful graduates

➤ Spanish-language courses offered in select locations

➤ Customized training upon request

➤ New course locations include Vancouver, Winnipeg, Minneapolis and Lebanon, Tenn, near Nashville area at the newest MCI Sales and Service center

Please see back page for course locations.

Customized regional training and on-site

operator training available through special

arrangement. MCI offers custom-designed

training to meet your technician’s and service

shop’s specific needs at your location.

CertificationTechnicians successfully completing the ex-

aminations after each training module will be

certified by MCI as proficient in that system and

model. Technicians successfully completing the

examinations for all modules offered for the MCI

coach model will receive designation as an MCI

Master Mechanic for that specific model.

FeesFees as noted are per person. per course and

include all course materials. (Lodging and travel

are not included.)

RegistrationPlease fill out the enclosed registration form and

fax it to us at 502-318-8131.

QuestionsFor more information, call 701-825-5227, or

502-318-3000 ext. 3577 or fax us at 502-318-8131

or e-mail [email protected].

Schedule and fees subject to change without

notice.

MCI Training Team from left: Carlos Ponce, Steve Kiner, Skip Neff, Anthony (Tony) Pascarella and William (Gator ) Pryne.

Air Production / Basic Cost: $375All Current Production Models

LOCATION COURSEDATE

Montreal 8/15–8/16Nashville area 5/2–5/3Vancouver 9/12–9/13Winnipeg, MB 3/14–3/15

Air System / Basic (Spanish) Cost: $375All Current Production Models

LOCATION COURSEDATE Dallas 3/9Los Alamitos 3/23Orlando 8/10

Electrical / Basic Cost: $375All Current Production Models

LOCATION COURSEDATE Montreal 4/18–4/19Nashville area 2/7–2/8Vancouver 6/20–6/21Winnipeg, MB 1/17–1/18

Electrical / Basic (Spanish) Cost: $375All Current Production Models


Electrical - I/O / Advanced Cost: $250All Current Production Models

LOCATION COURSEDATE Blackwood 2/22Dallas 4/26Des Plaines 9/27Los Alamitos 5/24Loudonville 6/28Montreal 8/9Nashville area 3/8Orlando 8/23Winnipeg, MB 3/29

Electrical - MCI / Advanced Cost: $250All Current Production Models


HVAC / Basic Cost: $375All Current Production Models


HVAC / Basic (Spanish) Cost: $375All Current Production Models


HVAC / Advanced Cost: $250All Current Production Models

LOCATION COURSEDATE Blackwood 2/23Dallas 4/27Des Plaines 9/28Los Alamitos 5/25Loudonville 6/29Minneapolis 2/21–2/23Montreal 8/10Nashville area 3/9Orlando 8/24Winnipeg, MB 3/30

HVAC / 608 Certification Cost: $750All Current Production Models

LOCATION COURSEDATE Blackwood 2/28–3/3Dallas 5/16–5/19Des Plaines 2/14–2/17Los Alamitos 6/6–6/9Loudonville 7/11–7/14Nashville area 3/28–3/31Orlando 8/1–8/4

Powertrain - S60 Cost: $250All Current Production Models


Powertrain - Caterpillar Cost: $250All Current Production Models


Powertrain - Allison/ZF Cost: $250All Current Production Models


Steering/Suspension / Basic Cost: $375All Current Production Models


Vehicle Dynamics Cost: $250d Models


E ModelsLOCATION COURSEDATE Blackwood 2/1Dallas 5/10Des Plaines 3/15Los Alamitos 10/11Loudonville 2/22Montreal 8/30Nashville area 4/26Orlando 7/19Winnipeg, MB 6/14

J ModelsLOCATION COURSEDATE Blackwood 2/2Dallas 5/11Des Plaines 3/16Los Alamitos 10/12Loudonville 2/23Montreal 8/31Nashville area 4/27Orlando 7/20Winnipeg, MB 6/15

Motor Coach Industries TechnicAL Training Institute 2006 Schedule

q Customized Class Information Requested

C O M P A N Y I N F O R M A T I O N (Please Print)

S T U D E N T I N F O R M A T I O N (Please Print)

Company Name (Please use full name)

Company Street Address

City / Province

Authorizing Person

Company Phone Company Fax

E-mail (optional)

State Zip/postal code

Title Department

Student Name

Course Requested

Course Requested

Position

Location Requested

Location Requested Date(s) of Course

Date(s) of Course

Please Note: Class sizes are limited, and will be accepted on a ‘first come first served’ basis.

Class registrations MUST be received a minimum of 3 calendar weeks (15 working days) prior to scheduled date of class.

Confirmations will be sent at least 3 weeks prior to scheduled date of class.

Lodging, meals, and transportation to and from the training location are not covered in the registration fees

MOTOR COACH INDUSTRIES INTERNATIONAL, INC., IT’S AFFILIATES, AND THEIR RESPECTIVE OFFICERS, DIRECTORS, EMPLOYEES, AND AGENTS (COLLECTIVELY “MCI”) MAKE NO REPRESENTATION OR WARRANTIES, EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FIT-NESS FOR A PARTICULAR PURPOSE) REGARDING ANY COURSE, INSTRUCTION, CERTIFICATION, OR ANY OTHER SERVICES FURNISHED BY MCI IN CONNECTION WITH THE TRAINING. IN NO EVENT WILL MCI BE LIABLE, WHETHER IN CONTRACT, TORT (INCLUDING ANY ACTUAL OR ALLEGED NEGLIGENCE OF MCI), OR OTHERWISE, FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, PUNITIVE, ENHANCED, RELIANCE, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS). IF, NOTWITHSTANDING THE FOREGOING, MCI IS DETERMINED TO BE LIABLE IN CONNECTION WITH ANY TRAINING SERVICES FURNISHED BY MCI, MCI’S LIABILITY SHALL BE LIMITED TO REFUNDING THE PRICE PAID BY THE PLAINTIFF/CLAIMANT TO MCI FOR SUCH SERVICES.

BASIC COURSES $375/course

Electrical English q Spanish qHVAC English q Spanish qAir Production/PM English q Spanish qSteering/Suspension English q Spanish q

HVAC 608 CERTIFICATION q $750

ADVANCED COURSES $250/course

CHECK ALL THAT APPLY PAYmEnT InformATIon

q Check Make check payable to: Motor Coach Industries

q MCI Account MCI Service Parts Account #: _____________________

q Credit Card Complete Information Below

Card Type q VISA q MC q AMEX

Card Number ____________________________________ Exp. Date _______

Name on card _____________________________________________________

Authorization signature ____________________________________________

Motor Coach IndustriesAttn: Technical Training Department7001 Universal Coach DriveLouisville, KY 40258

Or Fax your registration to: 502-318-8131Or E-mail to [email protected]

Mail yourEnrollMEnt

ForM to:

Course Requested Location Requested Date(s) of Course

2006 Registration Form

Electrical–I/O qElectrical–MCI qEngine–S60 qEngine–CAT qB500/ZF q

HVAC qVehicle Dynamics–D qVehicle Dynamics–E qVehicle Dynamics–J q