MTCCantilever Gate
Magnetic Automation Pty Ltdwww.magnetic-access.com.au
The MTC telescopic cantilevered sliding gate allows for telescopic leaf span of up to 10 metres and is designed for commercial, industrial and security applications. The construction eliminates the need for ground tracks and overhead rails. Fully welded RHS steel is used in the frame, back runner and support posts, with 25 x 25mm RHS uprights and welded mesh panels. All fabricated steel is hot galvanized for total protection and maximum life span. All rollers are supplied with sealed ball bearings which are designed
to exceed gate loads and are capable of 100% duty cycle. Power coating is optional from a wide selection of colours.
> Telescopic > Maximum Gate Opening 10 metres
Drive System
A typical motor drive supplied by Magnetic is the MSL 20 MCE but the gate system allows a variety of motors and controllers to be used.
Safety Devices
Standard safety devices include PE beams, light curtains inductive loop detectors and signage for use on automatic gate systems. A variety of other safety enhancements are available
Accessories
A variety of accessories are available such as climb protection – spikes, barbed wire, pressed spears and uniterrupted power supply.
Construction
Fully welded RHS steel is used in the gate frame, back runner and support posts, with 25 x 25mm RHS uprights and welded mesh panels. All fabricated steel is hot dipped galvanized for total protection and maximum life span.
CANTILEVER SWING TRACK
MTC
,001
_EN
_02/
03.2
019
Diagram provided for information purpose only
Magnetic Automation Pty Ltdwww.magnetic-access.com.au
National Sales & ServicePhone 1300 364 864
SydneyPhone +61 2 9421 8800E-mail [email protected]
Melbourne Head OfficePhone +61 3 9339 2900E-mail [email protected]
BrisbanePhone +61 7 3801 2100E-mail [email protected]
PerthPhone +61 8 9205 9900E-mail [email protected]
EnvironmentISO 14001
Health & SafetyOHSAS 18001
Quality ISO 9001
Magnetic stands for pioneering products - in every way. Our access control systems for vehicles or pedestrians clear the way for thousands of people every day - at car parks, toll gates, stations, airports and buildings. Our technology is also pioneering, however: with innovations drives, intelligent control systems and well thought-out details it provides maximum safety and longevity. Are you also on the path to Magnetic?
Access toProgress
Technical Data MTC Track Gate
Maximum Gate Opening Length 10,000 mm
Standard Gate Height (custom heights available) 2,150 mm
Warranty 1 Year
Member of
Recommended
