Transcript
Page 1: Modular Air Handling Units

Modular Air Handling Units

Page 2: Modular Air Handling Units

Airvent

Airvent is a Hungarian-Swedish privately owned company headquartered in Kecskemet, Hungary. We design, develop, manufacture and sell products for domestic, comfort and industrial ventilation.

Airvent was founded in 1990, and has since then grown to be one of the largest and most influential company on the Hungarian ventilation market.

We believe in building long-term relationships with our partners and customers, designing and manufacturing superb quality products, and creating an energy efficient indoor climate with the highest comfort possible. We operate sales offices in several locations throughout Hungary and Europe where qualified and creative experts, who have several years of engineering and sales experience provide great support. Our headquarters with the 10000 m2 manufacturing plant and 1000 m2 office buildings are located in Kecskemét, Hungary.

For further information please visit our website:www.airvent.hu

Page 3: Modular Air Handling Units

The year 2013 is the beginning of a new era for Airvent. Based on our extensive, 18 years of experience and knowledge gathered in the manufacturing and distribution of air handling units, we set out to develop a brand new line of units under the new name, Plex. The main target in the development process was to use a wide range of creative engineering solutions, while preserving the excellent quality and reliable characteristic that Airvent products are known for. As always the main focus of our design team was to create a product line that includes a variety of solutions that are valuable to our customers. One of our innovations we are really proud of is EasyLink. This is a new and patented assembly system, for a simple and elegant way of connecting or disconnecting the sections of the air handling units, without having to enter the modules. This is one of many solutions we believe our customers will appreciate, due to the really short installation time on site. We have also partnered with the most reliable fan and heat recovery suppliers in the world to be sure that Plex is in compliance with present and future energy-saving regulations and quality requirements. We provide all our standard air handling units with silent fans equipped with speed controlled EC motors.

Please contact our sales engineers to receive the best support when choosing the unit type and size that suits your needs the most.

The most important and unique characteristics of Plex air handling units:

Versatile and practical construction• A practical and wide range of sizes and functional options• Complete or modular designs with pre-defined or optional arrangement and set of components• Airflow range from 1200 to 30000 m3/h

Unique construction solutions• Airvent designed aluminum profile framework, connected with aluminum corners.• Aluzink coated double wall panel casing with insulation• Weather-proof surface protection• EasyLink. A revolutionary and patented, easy-to-use module assembly system• Dual. A special hinge-handle, which enables the inspection panels of the unit to be opened in either direction, or to be removed

by opening the handles on both sides of the door

Energy efficiency with low running costs• Rotary, plate or coil heat recovery system with high efficiency• Direct driven, energy efficient plug fans with variable speed regulation and low SFP value• Control system that ensures to operate the units with the highest energy efficiency• We can also supply a casing-option with increased sound- and thermo-insulation

Reliable and well-designed• Plex Selection. A calculation program for dimensioning and selecting our air handling units, which provides accurate values

and detailed technical data of the whole range• We gladly assist our clients by helping them select the most suitable unit type and size by providing technical consultancy• Short delivery times

Plex Modular Air Handling Units

3

Page 4: Modular Air Handling Units

SimPlex A modular air handling unit for supply or extract air

4

Page 5: Modular Air Handling Units

• A nominal airflow range from 1200 to 30000 m3/h• 21 sizes• Set, arrangement and performance of standard and optional

components are selected according to the specific applications

• SimPlex air handling units may be delivered in one piece or in separate sections, depending on the unit size

• Easy installation and fast startup• Energy efficient operation, low running costs

5

Page 6: Modular Air Handling Units

ComPlex Modular air handling unit for supply and extract air with energy-efficient rotary or plate heat exchanger

6

Page 7: Modular Air Handling Units

• A nominal airflow range from 1200 to 30000 m3/h• 21 sizes• Set, arrangement and performance of standard and optional

components are selected according to the specific applications

• ComPlex air handling units may be delivered in one piece or in separate sections, depending on the unit size

• Easy installation and fast startup• Energy efficient operation, low running costs

7

Page 8: Modular Air Handling Units

AltiPlex Complete vertical air handling unit for supply and extract air with highly efficient rotary heat exchanger

8

Page 9: Modular Air Handling Units

• A nominal airflow range from 1200 to 7200 m3/h• 6 sizes, with a standard set and arrangement of components:

direct driven supply and extract air fans, supply and extract air filters and rotary heat exchanger and electric heaters

• Due to its top connection, AltiPlex requires only a small installation space

• Can be ordered in 6 standard sizes, with a pre-defined set and

arrangement of elements• It contains F7/F5 filters as standard• Integrated control system• AltiPlex air handling units can be delivered in one piece or in

separate sections, depending on the unit size• Easy installation and fast startup• Energy efficient operation, low running cost

9

Page 10: Modular Air Handling Units

MultiPlex Modular, separate supply and extract air handling unit with rotary, plate or coil heat exchanger

10

Page 11: Modular Air Handling Units

• A nominal airflow range of 1200 to 30000 m3/h• 21 sizes• Set, arrangement and performance of standard and optional

components for the supply and extract air units are selected according to the specific applications

• If equipped with a coil heat exchanger the supply and extract air units can be placed in separate locations

• MultiPlex air handling units can be delivered in one piece or in separate sections, depending on the unit size

• Easy installation and fast startup• Energy efficient operation, low running costs

11

Page 12: Modular Air Handling Units

EasyLink is a brand new, revolutionary and patented assembly system specially designed for Plex. As the name implies it is a simple, elegant and accurate method of connecting or disconnecting the air handling modules from outside with a regular screwdriver tool in just a few minutes. EasyLink steers the modules to the correct position, is extremely solid and prevents leakage.

EasyLink

12

Page 13: Modular Air Handling Units

The Airvent designed framework of Plex air handling units is made of strong, solid aluminum profiles with aluminum corner fittings.

Upon request Plex units can be delivered with a base frame with adjustable feet made of aluminum. For outdoor installation an outdoor set is available with roof and inlet/outlet grills.

Framework and outdoor set

13

Page 14: Modular Air Handling Units

The inspection doors of our air handling units are as standard equipped with Dual, a flexible handle-hinge device. Dual enables the inspection doors to be opened both to the left and to the right side, or if the space is limited on site, the door can easily be removed. This makes the maintenance and cleaning of the units a lot easier for the operator.

Dual door handle

Page 15: Modular Air Handling Units

Dual — inspection door opened to the left

Dual — inspection door door removed

Dual — inspection door opened to the right

15

Page 16: Modular Air Handling Units

The rotary heat exchangers applied in Plex air handling units are Eurovent certified and operate with a very high heat and cooling energy recovery efficiency. Besides the high energy efficiency a great advantage of rotary heat exchangers is the short installation length, for smaller machine rooms. The rotors used for Plex units have as standard variable speed regulation and operation control functions, plus a purging sector to prevent the leakage of exhaust air into the supply air. Hygroscopic surface is an option.

Rotary heat recovery

16

Page 17: Modular Air Handling Units

Plate heat recovery

The cross-flow plate heat recovery units applied in Plex air handling units are Eurovent certified. The flat air passages in the airflow direction results in a low pressure drop and low risk of dust or dirt deposits in the passages. The special jointing technology ensures that the unit is tight and it minimizes the risk of leakage between the extract air and supply air paths. Plate heat recovery exchangers are produced with bypass and drip trays as standard. Epoxy coated surface is an option.

17

Page 18: Modular Air Handling Units

FanAs standard, Plex units are produced with plug fans equipped with EC motors (which even meets the strict requirements due to be introduced from 2015 in the EU), and integrated variable speed control. The support brackets for the fans are specially designed for Plex units; upon request tandem arrangement of the fans is also possible. To facilitate the maintenance, the fans are produced in a slide-out or in an easily removable design.

The regulation of Plex air handling units are performed with an integrated automatic control system. To save heating and cooling energy, the temperature can be regulated with heat recovery control. The air volume is measured on the supply and extract air sides and it is easy to set. The Plex control unit can manage the control of external units (cooling units, pumps, etc.) as well. The control system can be connected to Modbus or LON building management systems and can be ordered optionally with a hand-held or wall-mounted LCD display control terminal. Besides the local remote control, the web interface also enables to record operation data and to obtain statistics. The automatic control is the executive component of ControlAir System Management developed by Airvent, which leads to significant energy saving.

Automatic control

18

Page 19: Modular Air Handling Units

Our well-known, high quality sound attenuators are produced either with fixed, or for an easy cleaning with pull-out baffles. The attenuators are designed with regards to the noise level of the source and the required level of noise reduction. The attenuators built in the air handling unit’s casing are available from 500 to 1500 millimeters length.

The heating- and cooling coils applied in Plex units are produced in a conventional design of aluminum fins pressed on copper tubes. Each coil is selected according to the required parameters and optimized for its working point. The special plastic profile of the droplet eliminator’s lamellas is made of environment-friendly recycled material. Electric heaters are made of stainless steel tubular heating elements for high surface temperature. They are provided with double thermal protection and integrated control equipment.

Attenuator

Heating- and cooling elements

19

Page 20: Modular Air Handling Units

275Q

230Q

230R

190Q

190R

150Q

150R

125Q

125R

100R

97Q

77Q

63Q

63R

49Q

42R

35Q

28Q

23Q

17R

12Q

0 10 000 20 000 30 000 40 000

Air flow (m3/h)

Nominal airflow at an air speed of 4 m/sNominal airflow at an air speed of 3 m/sNominal airflow at an air speed of 2.4 m/s

R: Rectangular cross-section Q: Square cross-section

Legend

Airflows and sizes

20

Page 21: Modular Air Handling Units

12Q 17R 23Q 28Q 35Q 42R 49Q

63Q 77Q

63R

97Q 100R 125R

125Q 150R 150Q 190R

190Q 230R 230Q 275Q

720 x 720400 x 250

1320 x 1 320800 x 500

1800 x 18001400 x 700

2240 x 22401800 x 800

1800 x 22401400 x 800

2240 x 26401800 x 1000

2000 x 20001600 x 800

2440 x 24401800 x 900

2000 x 24401600 x 900

2640 x 2640 2200 x 1000

1440 x 14401100 x 500

1600 x 16001200 x 600

1440 x 18001100 x 700

1600 x 20001200 x 800

720 x 860400 x 300

860 x 860500 x 300

940 x 940600 x 300

1020 x 1020700 x 350

940 x 1180600 x 400

1180 x 1180800 x 400

1180 x 1440800 x 500

Cross-section sizes mm Connection sizes mm

Plex air handling units with heat recovery are produced in two types of cross-section design: in square or rectangular versions. These designs ensure the application of heat exchangers with the lowest internal pressure drop, the most advantageous settlement of fans, and the easier placing of air handling units in engine rooms with standard height.

21

Page 22: Modular Air Handling Units

www.airvent.hu


Recommended