Download pdf - MicroE Systems mercury i product presentation

GSI Group Inc. CONFIDENTIAL

Mercury Overview

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

[email protected]

Sold & Serviced By:


Mercury Family

• M1000: Analog sensor with cable and sub D connector• M1200: PCB Analog sensor with output pins

• M1500: Digital output sensor with cable and connector• M1500P: PCB Digital sensor with output pins

• M2000: Analog sensor with cable to SS-200c interpolator• M3000: Analog sensor with cable to SS-300c interpolator• M3500: Analog sensor with cable to SS-350c interpolator

• M3000SI: Analog sensor with cable to SS-300cSI interpolator. Serial word output

• M3500SI: Analog sensor with cable to SS-350cSI interpolator. Serial word output

• Vacuum: M1000V,M1500V,M2000V,M3000V, M3500V, M3000VSi and M3500VSi

• M3000SiDAA: Two analog sensors with serial word averaging interpolator• M3000DAA: Two analog sensors with quadrature averaging interpolator

Analog

Quadrature in the head

Programmable Quadrature

Programmable Serial Word

Vacuum Compatible

Dual Axis AveragerELECTROMATE

Toll Free Phone (877) SERVO98Toll Free Fax (877) SERV099

[email protected]

Sold & Serviced By:


Mercury Family Common Features

• Single laser optical configuration• Chrome on glass scales only

– Linear, full rotary and rotary segment– Index only (no left/right limits)

• Modular (Any Mercury encoder can pair up with any Mercury grating)

• Broad alignment tolerances• Very small sensor head• Wide selection of derivatives• CE and RoHS compliant



[email protected]

Sold & Serviced By:


Mercury Analog

• M1000– Analog sensor head (M05, M10, M20)

– 20µm period Sin and Cos output– 1.0Vp-p differential across a 120Ω

resistor– 20µm wide index window– Calibration required for gain and offset

corrections using alignment tool– Electronics inside the DB15 connector– Same sensor head as programmable units– Up to x256 customer interpolation



[email protected]

Sold & Serviced By:


Mercury Analog

• M1200– 20µm period Sin and Cos output– 1.6Vp-p differential across a 2kΩ

resistor– 20µm wide index window– No gain, offset or phase corrections– 10 pins for thru-hole PCB mounting– Up to x256 interpolation with customer supplied

signal corrections (gain, offset and phase)



[email protected]

Sold & Serviced By:


Mercury Quadrature in the Head

• M1500– Factory set resolution

• x4 = 5µm• x8 = 2.5µm• x20 = 1.0µm• x40 = 0.5µm

– Comparator based interpolation– 20µm wide index window– No gain, offset or phase corrections– 3 form factors

• M1500S with 422 drivers in the DB15 connector• M1500H with 2x5 micro connector• M1500P with 10 pins for thru hole PCB mount

– Optional alignment tools and SmartPrecision softwareELECTROMATE

Toll Free Phone (877) SERVO98Toll Free Fax (877) SERV099

[email protected]

Sold & Serviced By:


Mercury Programmable Quadrature

• All use the analog sensor head (M05, M10, M20)

• Interpolator driven by micro and FPGA• 3 models

– M2000: x4 – x256– M3000: x4 – x1024– M3500: x4 – x4096

• 1 LSB index pulse• Programmable interpolation and

maximum output frequency• Built-in LED status indicators• Push-button calibration• SmartPrecision software required for

programming



[email protected]

Sold & Serviced By:


Mercury Programmable Serial Word

• All use the analog sensor head (M05, M10, M20)

• Interpolator driven by micro and FPGA• 2 models

– M3000Si: x1024– M3500Si: x4096

• Position word maintained in interpolator• Encoder speed limited only by analog

bandwidth (7.2M/s)• Programmable index mode• Built-in LED status indicators• Push-button calibration• SmartPrecision software required for

programming



[email protected]

Sold & Serviced By:


Mercury Vacuum

• All Mercury models available in vacuum compatible versions except M1200 and M1500P

• System:– Vacuum sensor head w/ 1.5M cable– 0.5M Atmospheric cable– Atmospheric processing electronics

• M1500V sensor cable is 5M with optional external cable.

• Rated to 10-8 Torr



[email protected]

Sold & Serviced By:


Mercury Dual Axis Averager

• All use two analog sensor heads (M05, M10, M20)

• Interpolator driven by micro and FPGA• Interpolation depth: x1024• 2 models

– M3000SiDAA: Serial Word Output– M3500DAA: Quadrature Output

• Provides the averaged output of two sensors or their difference (or both)

• Many programmable features• Priced 25% less than two separate M3000

interpolators• USB software interface



[email protected]

Sold & Serviced By: