Download pdf - Law enforcement equipment

LIST OF CONTENTS

Armored personnel vehicle DOZOR-B

Multifunctional armored vehicle KOZAK

Hydro-jet special automobile AVS-40


Automatic grenade launcher KBA.117

Automatic grenade launcher UAG-40

High precision rifle - Z-008 TACTICAL

High precision rifle - Z-008 TACTICAL PRO

Shotgun VERTAC RS-X2

Pump-action shotguns of type FORT-500

FORT Pistols:

FORT-12

FORT-14TP

FORT-17

Thermal imaging sights:

Sight archer TSA-5

Sight archer TSA-4

Sight archer TSA-2

Thermal imaging camera:

Review camera TVC-1

Thermal imaging monoculars:

Monocular archer TMA-10

Archer TMA-55

Thermal imaging goggles:

Binocular archer TGA-LRF

Archer TGA-3 digital thermal binocular

Signaling kit UP-50

Non-lethal weapon

Firearm sound suppression device PSUZV

Batons

Metallic handcuffs

Irons

Complete set of defence anti-riot arrangements

Cartridges FORT-T cal. 9 mm p.a.

VERTAC RS-X2 ammunition

Protective shields

Training complex

4

6

8

9

10

11

12

13

14

15

16

16

17

18

19

19

19

20

20

20

21

21

21

22

22

22

23

24

26

27

28

28

28

29

29

30

30

LIST OF CONTENTS

Personal anti-riot equipment:

Plastic anti-riot shield

Metal anti-riot shield

Bullet-proof vests of external carrying MODULE

Bullet-proof vests of underwear carrying GUARD

Bullet-proof vests of the semihidden carrying ESCORT

All bullet-proof vests

Container for explosives transportation IZAT-1

Armored helmet

Blast engineer suit

SOKOL-3 Jammer

Counter-surveillance equipment PLASTUN-3D mobile system

Manportable direction finder FILIN

Surface and low-flying slow targets detection radar LIS

Surface short range radar BARSUK

Surface short range radar BARSUK-A

Surface target detection radar MANGUST

The mobile radiomonitoring system ARGUS-M2

Mobile interception system 5V - THURAYA M

Mobile phone jamming systems VOYAGE

Forensic cases

Unmanned air observation complex 1E

Unmanned air observation complex VE1


Unmanned air observation complex MR6

Surveillance and reconnaissance UAV R-100

Unmanned aircraft complex CHIZH-L

Unmanned aircraft complex VOROBEY-M

Unmanned aircraft complex VOROBEY-M VTOL

Armoured Vehicles

Armor kits for civil vehicles

Ambulances

Training of counter-terrorist units

31

31

31

32

33

33

34

35

36

36

37

39

40

40

42

43

44

45

46

47

48

49

49

50

50

51

52

54

56

58

60

61

64

4

STATE FOREIGN TRADE ENTERPRISE


DOZOR-B armoured personnel carrier is a version of multi-purpose wheeled vehicle. It isdesigned to transport goods and people and to provide protection against small arms and NBC factors. DOZOR-B is suitable for usage by special units and police forces as a vehicle orcarrier for different types of armament and military equipment. It can be used during both military and peacekeeping operations, moving on highways and cross-country terrains. This vehicle is available in the following modifications:

• armoured personnel carrier

• armoured vehicle

• NBC reconnaissance vehicle -command vehicle -ambulance

• reconnaissance vehicle

• general purpose vehicle

57, Moscowsky Av., Kyiv, 04073, UkraineTel.: +38 (044) 568 50 72, Fax: +38 (044) 568 52 70

E-mail: [email protected]


Technical characteristics

Vehicle type Wheeled, armoured

Combat weight, tons 6,9

Overall dimensions, mm

– Length 5400 (without the winch)5680 (with the winch)

– Width 2400

– Height 2700

Ground clearance 400

Crew, men 3

Troops, men 8

Number of firing ports 6

Mobility characteristic:

Wheel arrangement 4x4

Type of tires Tubeless, bulletproof, with central pres-sure control

Engine type DEUTZ BF 4M 1013 FC (EURO-3), four-cylinder diesel turbochargedengine with intercooler

Engine power, kW (h/p) 1122 (197)

Power-to-weight ratio hp/t 28,5

Type of transmission Automatic, hydro-mechanical 1000LCT

Maximum speed, km/h:

– on road 90-105

– off road 65

Distance range, km:

– on road 1000

– off road 700

Maximum angle of gradient, deg. 30

Operation temperature, C° -40/+50

Towing force of the winch, tons 6,8

Armament:

Machine gun (remote control): NSVT

Caliber, mm 12,7

Ammunition allowance, pes. 450

Traverse, deg. 360

Elevation, deg. -3 to +68

Additional equipment:

NBC system Filtering and ventilating unit

Navigation system Satellite SN-3003 Bazalt

Air cooling system capacity, kW 4,4

IR night vision system range, m 180

Radio ultra-shortwave communication system range, km

20

6



Armoured vehicle KOZAK has the engine power of 176 h/p and in the equipped conditionis capable to tow the trailer with weight up to 4 tons. It is capable to overcome obstacles more than 35 degrees and ford depths up to 1,5 meters without preparation. The V-typebottom is capable to stand the explosion of a mine not less than 3 kgs of the TNT equivalent, andmodular design of the crew compartment enhances the crew survivability. The design allows to vary a degree of protection by replacement of panels’ thickness, depending on the combatmission of the armoured vehicle. AV KOZAK has the GPS-navigator, the NBC reconnaissenceequipment, the parking video equipment, the climate controll system, ABC and improved noise and light isolation.




Technical characteristicsVehicle type Wheeled, armoured

Combat weight, tons 5,5

Overall dimensions, mm

– Length 5900

– Width 2150

– Height 2300

Grround clearance, mm 570

Crew, men 2

Troops, men 8

Number of firing ports 6

Mobility characteristic:

Wheel arrangement 4x4

Type of tires Tubeless, bulletproof, self inflating

Engine type IVECO four-cylinder diesel turbocharged engine with intercooler, EURO 4

Engine power, kW (h/p) 130 (176)

Power-to-weight ratio, hp/t 32,0

Type of transmission ZF, mechanical, synchronized, 6+1

Maximum speed, km/h:

– on road 120

– off road 70

Distance range, km:

– on road 1000

– off road 700

Maximum angle of gradient, deg.:

– approach 50

– departure 45

– side slope 25

Operation temperature, C° -40/+50

Towing force of the winch, tons 6,8

Armament:

Machine gun: NSVT

Caliber, mm 12,7

Ammunition allowance, pcs. 450

Machine gun:

Caliber, mm 7,62 PKT (KT)


Automatic grenade launcher: AG-17

Caliber, mm 30


Additional equipment:

Additional floor protection 3 kg. TNT equivalent

Amortization seats +

Radiation detection unit +

Rare image camera +

Communication equipment«Driver-street»

+

Radio ultra-short wave communication system

+

Climate control system +

Navigation system +

8



Base classis КамАЗ-43118

Wheels formula 6x6

Engine output, kW(h.p.) 191(260)

Maximum speed, km/h 90

Fire-fight crew, including driver, persons 3

Capacities, m3 (I), no less:

-water tank 6,7(6700)

-foam-agent tank 0,05(50)

-painter tank 0,3(300)

-bottle for active mixture v=0,027m3(27 I) 3

Pump ПН-40УВ

-deliver, ms (l/s), no less 0,04(40)

-pump head, m 100+5

Roof monitors (light/power)

-number, pieces 1/1

-control electric drive

-rotation angles, degree

in horizontal plane 350/180

in vertical plane minus 15 plus 45

-maximum distance of deliver a jet, m, no less 50/40

Total weight, kg, no more 20780

Dimensions, mm, no more 9100x2500x3600





Hydro-jet special automobile АВС-30 is designed to counter with groups ofindividuals who violate public order via water-jet attack and other special agents, and isintended for delivery of operating crew, water, other special agents to the point of destination.


Index АVS-30

Base chassis КрАЗ-63221

Wheels formula 6x6

Engine output, kW (h.p.) 243 (330)

Maximum speed, km/h 85

Fire-fight crew, including driver, persons 3

Total weight , kg, no more 24000

Capacities, m3 (l), no less: 7 (7000)

– water tank foam-agent tank 0,05 (50)

– painter tank 0,3 (300)

– bottle for active mixture v=0,027 m3 (27l), 3

Motor pump, type МНА-27/100

– deliver, m3/s (l/s), 0,027 (1600)

– no less pump head, m 100±5

Roof monitor

– number, pieces

– control 1

– rotation angles, degree manual

– in horizontal plane 350

– in vertical plane plus + / - 30

Under bumper nozzles

– control distance, pneumatic

– rotation angles in horizontal plane, degree 180±5

– maximum design distance of deliver a jet, m 30

Dimensions, mm, no more 10440x3200x4050

10


Automatic grenade launcher KBA.117

30 mm automatic grenade launcher KBA.117 is designed to defeat manpower and fire weapons of the enemy, equipment and transport located outside the shelters (in open trenches, gullies, ravines, on the reverse slopes of heights).

Technical characteristic

Caliber 30 mm

Initial flight speed of grenade 185 m/s

Rate of fire 400 shots/min

Minimum distance of mounted shooting 1000 m

Maximum height of the trajectory 905 m

Sighting range 1700 m

Tape capacity 29 grenades

Length 840 mm

Weight of the machine without ammunition 18 kg

Weight of the equipped tape 14,5 kg



Automatic grenade launcher UAG-40

UAG-40 is the first portable automatic grenade launcher. UAG-40 reposes on the tripodbefore shooting. The total weight of the grenade launcher with tripod is less than 30 kilograms. Tripod’s design allows firing from unprepared sites.

High level of portability and no need to prepare operating site allows quick change of firing position both in the open air and in an urban environment. Using UAG-40 can be resulted with flame efficiency of ground campaign.

The UAG is very high-speed; it can use all types of grenades approved by NATO.The optical, infrared, photo visual or electronic sights can be fixed to the UAG-40 housing.The complex use of the indicated engineering design decisions allowed to obtain the main

advantages: high exactness (accuracy) at series shooting, lowered recoil impulse, highreliability and simplicity in production and operation.

Technical characteristic

Parameter Value

Length, mm 960

Weight (without grenade), kg 15

Bore, mm 40

Length of tube, mm 400

Rifle:

Pitch, mm 1220

The number of riffles:

– In the begging of tube 8

– In the middle of tube 16

– In the end of tube 24

Grenade launching speed, m/sec 240

The maximum shooting range, m 2200

Fire mode Single/automatic

Shooting rate, round/min 400

12


High precision rifle - Z-008 TACTICAL

Extremely accurate, with a handy tactical stock (it consists of composite with embedded aluminum bedding system). The Rifle with a Match heavy barrel is suitable not only for sports but for long distances hunting too. There is a muzzle thread for muzzle brake or suppressor.

Designed for use with an optical sight. Applied a very comfortable stock with a wide range of adjustments (cheek, extension and rotation of butt plate). Heavy, long barrel allows you toaccelerate bullet to a high velocity and fire over very long distances. Typical accuracy sub 1/3 MOA.

FEATURES

9/Olive ws sw 22 Black ws sw

TYPICAL ACCURACY 1/3 MOA

• Select match grade stainless steelbarrel

• Stainless steel bolt action Z-008• Picatinny rail (MIL STD 1913) 20MOA

elevation• Free floated barrel• Heavy target barrel (muzzle up to 1 inch)• Muzzle tread• Muzzle brake• Bedding

• Timney adjustable trigger in base• Black / Dark Green / Matt Steel finish• Black or Olive Green stock finish• Al magazin cap 4 rounds• Weight appr. 6.5 kg• SHORT ACTION: 223REM. 243Win,

223WSSM, 308 Win. 6.5x47,

300WSM. 7WSM. 7SAUM

• LONG ACTION: 270Win, 300WM,

6.5-284

Note: Blue - only single shot rifle

3 barrel length type (Lothar walter or shilin barrels):

• Long (up to 27”) Overall: up to 50”

• Super Long (up to 30”) Overall: up to 52”

• EXTRA Long (up to 32”) Overall: up to 54”

ADDITIONAL EQUIPMENTSFluted barrel Muzzle tread cap

Fully adjustable jewell trigger Suppressor

Single short receiver Additional barrel

Additional Picatinny rail Folding stock



High precision rifle - Z-008 TACTICAL PRO

Rifle is designed in a safe, convenient tactical stock zbroyar. Foregrip allows you to install the elongated picatinny base for mounting night sight, lights and etc. Picatinny base is able to stand in foregrip at an angle of 45 degrees. Bipods can be placed far ahead.

Designed for use with an day sight and backup collimator simultaneously. Sniper magpul stock has a very wide range of adjustments. The folding stock is comfortable in wearing. The shooter will no doubt be pleased with the pistol grip, with emphasis. Typical accuracy sub 1/3 MOA.

FEATURES

• Select match grade stainless steel barrel

• Stainless steel bolt action Z-008

• Picatinny rail (MIL STD 1913) without elevation

• Free floated barrel

• Heavy target barrel (muzzle up to inch)

• Muzzle tread

• Muzzle brake

• 2 Additional al picatinny rail

• Timney adjustable trigger in base

• Black matt finish

• Black matt stock finish

• Al magazin cap 4 rounds

• Weight appr. 6.8 kg

• SHORT ACTION: 22-250, 223REM,

243Win, 308 Win, 6.5x47,

300WSM, 7WSM, 7SAUM

• LONG ACTION: 270Win, 300WM,

6.5-284, 6.5x55, 7RUMT 338LM,

458SOCOM

Note: Blue - only single shot rifle

3 barrel length type (Lothar walter or shilin barrels):

• Long (up to 27”) Overall: up to 50”

• Super Long (up to 30”) Overall: up to 52”

• EXTRA Long (up to 32”) Overall: up to 54”

ADDITIONAL EQUIPMENTS LEFT HAND DESIGN Muzzle tread cap

Fluted barrel Suppressor

Fully adjustable jewell trigger Additional barrel

Additional picatinny rail Folding stock

14


Shotgun VERTAC RS-X2

PUMP ACTION SHOTGUN

Caliber 12 Ga Magnum, 3“

Barrel length 51 cm / 21“

Chokes Cylinder

Receiver steel black anodized

Type of sights adjustable rear & ghost ring

Overall length 109 cm / 45“

Length of pull 36,5 cm / 15“

Weight 3,3 kg / 4,12 Lbs

Capacity 7+1 shots



Pump-action shotguns of FORT-500 type are smooth-bore weapon for law enforcement.

Sights are mounted on picatinny rail on shotgun receiver. Mounting of pistol grip and flashlight on the rail system is provided.

Attaching of special devices on the barrel is possible (for breaking lock, for shooting grenade with tear-gas).

Pump-action shotguns of type FORT-500

Technical data FORT-500M FORT-500A FORT-500T

Calibre 12 12 12

Barrel length, mm 345 510 510

Cartridge-chamber length, mm 76 76 76

Shotgun length:

– with folded butt-stock, mm 775±5 750±5 930±5

– with unfolded butt-stock, mm 877±5 1010±5 1030±5

Shotgun height:

– with folded butt-stock, mm 205±5 210±5

– with unfolded butt-stock, mm 205±5 170±5 170±5

Shotgun width, mm 64 52±2 52±2

Magazine capacity, rounds 4 6 6

Weight of the rifle without belt,

kg, not more than4,12 4,1 4,3

16


FORT 12 – is semiautomatic pistol of 9x18 mm caliber with effective range up to 50 meters. It is balanced and compares all qualities of combat pistol: metal frame, which secures reliabil-ity and strength, large magazine capacity, reliable safety system with capability to block ham-mer either on combat or safety position and relatively low weight and small dimensions make it comfortable for carrying. Therefore FORT 12 was chosen as service pistol of Ukrainian law enforcements. Optionally pistol can be equipped with sound suppressor, laser designator or tactical flashlight.

Technical data

Caliber (mm) 9x18 mm Makarov9х17 mm Browning

Operation mode Blowback operated

Trigger mechanism Single or double action

Dimensions (mm):

– Overall length 180

– Height 131

– Width 32

Barrel length 95

Weight with empty magazine (kg) 0,83

Muzzle velocity (m/s)320 (9х18 мм)305 (9х17 мм)

Magazine capacity (rds) 12

Practical rate of shooting 40

Rifling 6 grooves

2 – is semmiautomatic pistoll of 9x18 mm caliber wwith effective rangge up tnced and ccompares all quaalities of combat pistol: mmetal frame, whicch sec

FORT pistols

FORT-12



FORT 14 TP – pistol, which is accurate, reliable and simple to use. Special feature in design of this model is fixed quick-detachable barrel.

Due to its ergonomics, extended barrel and extended line of sight «FORT 14 TP» has greataccuracy even with rapid firing. That is why FORT 14 TP is a main pistol for officers of special enforcements.

Tactical complex FORT 14 TP consists of pistol FORT 14 TP tactical light LT6А and sound suppressor FORT 4 optionally it can be equipped with magazine of extended capacity.

Technical data

Caliber (mm) 9x18 mm Makarov9х17 mm Browning



Dimensions (mm)


– Height 140

– Width 33

Barrel length 123


Muzzle velocity (m/s) 335

Magazine capacity (rds) 14 (24)


Rifling 6 grooves

TP – piistol, which is acccurate, reliable and simplee to use. Speciaal featurel is fixeed quick-detachhable barrel.

FORT pistols

FORT-14TP

18


FORT 17 – in design of this model highly durable polymers reinforced by steel were widely used. As result the weight of pistol was decreased significantly without damage to the combat characteristics.

Due to plastic frame, ergonomics is highly increased and interchangeable back straps allow to fit grip size to the shooters hand quickly. Universal rail for assembling tactical accessories is situated under the barrel.

Besides FORT 17 is available in two modifications: normal and for left-handed shooters.

Technical data

Caliber mm 9x18 mm Makarov9х17mm Browning



Dimensions (mm)


– Height 130

– Width 34

Barrel length 95


Muzzle velocity (m/s)320 (9х18 мм)305 (9х17 мм)

Magazine capacity (rds) 12


Rifling 6 grooves

FORT-17

FORT pistols



SIGHT ARCHER TSA-5

SIGHT ARCHER TSA-4

Thermal imaging sights

Thermal SIGHT ARCHER TSA-5 is intended to review the countryside, searching forpurpose and aimed fire under different lighting conditions, including in complete darkness and inconditions of limited visibility (smoke, fog, snow, rain, do not contrast the underlying surface, hidden by vegetation objects).

The device can be used as a monocular, without installing anything on their arms. For ease of use in this case, a wrist strap to hold the instrument. For permanent installation device provides a standard photo fixing.

The SIGHT ARCHER TSA-4 - Further develop the ARCHER TSA-3. The key differencebetween the device - focusable optics - significantly improves the performance of the sight.

The sight is made in impact-resistant waterproof plastic case with a conveniently placedcontrols. Removable wrist strap allows to hold the device with one hand when it is used as a monocular.

20


SIGHT ARCHER TSA-2

Thermal imaging sights

SIGHT ARCHER TSA-2 is designed for surveillance, target and aimed fire at any light andunder low visibility conditions (smoke, fog, objects, hidden by vegetation or merging with the underlying surface).

SIGHT ARCHER TSA-2 is designed for surveillance, target search and aimed fire at any light and under low visibility conditions (smoke, fog, objects hidden by vegetation or objectsmerging with the underlying surface). The sight is made of impact-resistant waterproof plastic housing with conveniently placed controls. Removable wrist strap allows to hold the device with one hand when it’s used as a monocular.

Thermal imaging camera

REVIEW CAMERA TVC-1 designed for mounting on vehicles (cars, boats) and is used forassistance when driving or surveillance-detection instrument.

Car Kit TVC-1 is for vehicle vision applications and designed to ensure the review areas in any light and under low visibility conditions (smoke, fog, objects hidden by vegetation or objects merging with the underlying surface). TVC-1 uses a built-in or an additional display to display information. Kit is used or assistance when driving or as surveillance-detection instrument.

REVIEW CAMERA TVC-1



ARCHER TMA-55

Thermal imaging monoculars

Digital MONOCULAR ARCHER TMA-10 is a compact thermal imaging device designed toreview areas in conditions of poor visibility, remote temperature control of industrial equipment andvehicles, energy audits, non-destructive inspection and other applications.

Monocular is equipped with a passive receiver of far infrared (thermal) and a range of 25mm or 35mm lens with fixed focus.

The device has a built-colored mini-high-resolution display and eyepiece diopter correctionability. Optical diagram of the device provides an image of the observed object, «one to one», with no increase, which makes it comfortable to use the device while walking or driving. The device has a digital zoom function with a multiplicity of x2 and x4. Several color schemes allow to select the best option to display the various conditions of observation.

Digital monocular ARCHER TMA-55 is a compact thermal imaging device designed to reviewareas in conditions of poor visibility, remote temperature control of industrial equipment andvehicles, energy audits and other applications.

Despite the slight increase in the external dimensions of the model, it was possible to achieve high resolution and contrast images by using high-resolution lens with the aperture F1.0.

Monocular is equipped with a passive receiver of far infrared (thermal) range and 55mm manual focus lens.

The device has a built-colored mini-high-resolution display and eyepiece diopter correctionability. Optical diagram of the device provides an image of the observed object, «one to one», with no increase, which makes it comfortable to use the device while walking or driving. The device has a digital zoom function with a multiplicity of x2 and x4. Several color schemes allow to select the best option to display the various conditions of observation.

MONOCULAR ARCHER TMA-10

22


Thermal imaging goggles

BINOCULAR ARCHER TGA-LRF - modern compact surveillance device. High performanceoptical system, an enhanced feature set, ergonomic design makes the unit invaluable for a wide range of applications.

DIGITAL BINOCULAR ARCHER TGA-3 is thermal supervision device.

Binocular is designed to review areas of poor visibility; remote control of thermal status of industrial equipment and vehicles; power equipment audit; non-destructive inspection and other uses.

Modification of binocular with integrated laser rangefinder significantly improves device possibilities.

Binocular has shockproof waterproof plastic housing with conveniently placed controls, equipped with video output and input of external power supply.

Binocular is equipped with detectors average (320x256) or high (640x512) resolution, different lenses with manual focus, an optional laser rangefinder.

The device has a digital zoom feature images from the multiplicity of x2 and x4. Several color schemes allow choosing the best option display in different seeing conditions. The device includes adjusting the brightness and contrast of the images. The settings of parameters are saved when you turn off the device. Power supply is provided by 4 AA size batteries.

BINOCULAR ARCHER TGA-LRF

ARCHER TGA-3 DIGITAL THERMAL BINOCULAR



SIGNALING KIT UP-50

Signaling Kit UP-50 is designed for a wide range of customers wishing to ensure their safety by means of light (or sound – with adapter) signals, and the main users, professionals in this case – the rescuers. Is the part of the Survival Kit of each military pilot.

KIT is a simple protective device and used to protect the facility or its perimeter – used by private security firms to protect the fields and construction sites.

In comparison with the signal gun / pistol, the lunching device SIG-50, which is the part of Signaling KIT UP-50, has 4-5 times smaller mass, is incomparably smaller in dimensions and has secure attachment with the carabiner on the clothing or equipment. In addition, Signaling KIT UP-50 has also advantage which does not have signal revolvers / pistols – remotely controlled shot used for protection of the facility or its perimeter. A similar but more complex device in design and operation used in the armed forces under the name «signal a mine». With the addition of the same set of UP-50 is used by airport services for protection of airfields them and scaring birds away.

The set is indispensable in the areas with the absence of radio and telephone communication (active work in the mountains, cold and damp conditions, followed by discharge of the battery), the emer-gency location designation, highlighting the object or course.

Composition of SURVIVAL KIT UP-50:

• launching device SIG-50 with the established center-fire striker;

• signals / pyrotechnic rockets, signal and blank cartridges cal. 5.6 mm / «Zhevelo» capsules with an adapter for them;

• spare «side» striker for the respective rockets and blank cartridges;

• packing for waterproof safety;

• operation manual.

For the perimeter security in addition to the standard set of UP-50 «Remote Launch Kit» can be supplied:

• piece of thin wire with length of about 6 m

• plowshare for installation of the KIT in the ground, on the post (there are holes for fasteners - nails, string and other handy items).

There are other possible configuration options for the customers’ orders.

24


FORT 12R – modification of pistol Fort 12 of 9 mm P.A. caliber with non lethal action uses ammunition with elastic bullet. Pistol with effective range up 10 meters intended forself-defence of civilians and serves as service weapon for security agencies.

Modification FORT 12RM has improved ergonomics and changed slide form.

Both modifications made of high-quality steel and have service life of 50 000 shots.

Technical data

Caliber mm 9 mm P.A./ .45 Rubber



Dimensions (mm)


– Height 131

– Width 32

Barrel length 95


Muzzle velocity (m/s) 300

Magazine capacity (rds) 13 8


Non-lethal weapon



FORT 12T – gas pistol with ability to shoot traumatic ammunition with elastic bullet caliber 9 mm P.A. Special feature of this model is availability of special «teeth» inside the barrel which prevent using normal ammunition.

FORT 14R – traumatic pistol of caliber 9 mm P.A. intended for self-defense of civilians. Due to extended barrel and extended sight radius FORT 14R assures necessary accuracy even with rapid firing. Metal frame provides additional rigidity in design of the gun and increasesservice life of pistol.

FORT 17R – traumatic pistol of 9 mm P.A. caliber intended for self defense of civilians. This model has frame made of highly durable plastic reinforced by steel - as result it has reduced weight which is important for every day carrying. As the combat FORT 17 this pistol hasinterchangeable back straps enabling to fit the grip size to the shooter’s hand.

FORT 17T – gas pistol with ability to shoot traumatic ammunition with elastic bullet caliber of 9 mm P.A. Special feature of this model is availability of special «teeth» inside the barrel which prevent using normal ammunition.

FORT 18R – traumatic pistol of 9 mm P.A. caliber intended for self defense of civilians. De-sign features of this model are extended barrel which increases accuracy, massive slide which reduces recoil, reduced weight due to polymer frame and interchangeable back strapsenabling to fit the grip size to the shooter’s hand.

Non-lethal weapon

Technical data FORT 14R FORT 17R FORT 18R

Caliber (mm) 9 mm P.A./ .45 Rubber 9 mm P.A./ .45 Rubber 9 mm P.A./ .45 Rubber

Operation mode Blowback operated Blowback operated Blowback operated

Trigger mechanism Single or double action Single or double action Single or double action

Dimensions (mm)

– Overall length 207 180 207

– Height 140 132 131

– Width 33 34 34

Barrel length 124 95 124

Weight with empty magazine (kg) 0,86 0,68 0,71

Muzzle velocity (m/s) 320 300 320

Magazine capacity (rds) 15 (8) 13 (8) 13 (8)

Practical rate of shooting 40 40 40

26


Firearm sound suppression device PSUZV

Firearm sound suppression devices (PSUZV) developed and manufactured by specialized scientific and research institute of National space agency of Ukraine in close cooperation with Special Forces community. First generation of PSUZV passed government trials and introduced into service in 1998. Consistently growing model range includes suppressors for pistols, assault rifles, sniper rifles and machine guns.

Suppressors tested in accordance with MIL-STD-1474D and provide hearing safe soundreduction level, remove muzzle flash, significantly lower recoil and muzzle jump.

Apart from low flash and sound signature, use of PSUZV reduce dust/snow particles lifting, allow voice communication between operators and «friend or foe» identification. Suppressors characterized by low back pressure levels, ensuring clear field of view for shooter and minimal increase of rate of fire.

Suppressors for assault rifles, sniper rifles and machine guns manufactured from heat resistant stainless steel. All components of suppressor are welded into structural monoblockwhich assures long service life, resistance against extreme pressure and temperature,exclude possibility of wrong assembling after cleaning. Some models incorporate central tubebullet channel, which dramatically increases suppressor survivability under heavy duty use, lowattachment threads and ammunition quality.

Proprietary black mate heat and scratch resistant coating is also not IR reflective.

Other materials (steel, titanium and aluminum alloys) custom coating and attachments available upon request.

Average specifications of typical suppressors.

Weapon Caliber Attachment type Dimensions, mm Material Weight, kg

Pistol 9x19 TH 13x1 35x220 Aircraft aluminum 0,32

Assault rifle 5,56x45 1/2x28” 38x210 Stainless steel 0,54

Sniper rifle 7,62x51 TH 18x1 43x240 Stainless steel 0,7

Machine gun 7,62x54R 18x1.5L 43x240 Stainless steel 0,7



Technical

characteristics

Rubber baton

BR-M

Expandable rubber

baton BRE

Baton

«TONFA»

Rubber baton

BRL

Length, mm 600 450-650 850-900 450

Diameter, mm 30 30 25 30

Weight, kg 0,820 0,63 0,45-0,50 0,51

The batons BRL, BR-M, BRE are made of a resilient rubber.

They have a leather loop on a hilt for comfortable carrying and are intended for use by patrol and guard services.

Option: rubber baton holder made of leather for carrying on the belt.

1

2

3

4

1 2 3 4

Personal anti-riot equipment

BATONS

28



METALLIC HANDCUFFS

Metallic handcuffs have 8 degrees of protection:

1. High-quality steel.2. The connection of three rings eliminates the ability of their break

while jamming and boring.3. There is a double number of wedges.4. The presence of two teeth at each wedge.5. The presence of a pin for the key.6. The concealed rivets.7. The presence of blocking on an unsanctioned opens of the lock.8. There are slots in the sector and pins in the cramp. The handcuffs

bear break effort up to 200 kg.

Irons are used by force structures for physical restriction of the person committed a crime, and criminal’s transporting in thevehicle that is not intended for that.

Irons don’t require special service and keep its performance at temperature from -45°С to +40°С and relative humidity up to 98%.

Technical specifications

Weight, not more, kg 1,1

Break effort, not less, kg/s 200

The number of snaps into

action, not less, times

5000

IRONS

Complete set of defence anti-riot arrangements

Complete set is intended for defence of the parts of the body exposed to traumas most of all and consists of thefollow parts:

• protectors on legs and knee;

• protectors on arms and elbows;

• protectors on forearms and shoulders.

Complete set is made of shockproof polymerous material and has high shock-absorber properties.

Owing to not great weight complete set can be used for long term carrying.



Cartridges FORT-T made from ecologically purematerials that are certified in Ukraine and intended for self-defense.

Use of those cartridges does not lead to hard physical injuries. Effective range of action 3,5 – 10 m.


Cartridge diameter 9,5 mm

Cartridge length, not more than 22,7 mm

Missile velocity 300 ± 20 m/s

Diapason of usage (-10)°C (+40)°C

Minimise distance of usage 3,5 m

Cmse

Uinn

Cartridges FORT-T cal. 9 mm P.A.

VERTAC RS-X2 ammunition

12 cal. rubber Buckshot

Gualandi Slug

Teflon Slug Tornado Slug 12 cal. Rubber Slug

Rubber Slug SIXLUG Standard Slug Super Slug

30


Protective shields

Training complex

Intended to use in police or internal law enforcement troops. They ensure protection against gun bullets and large caliber shot. Can be modified to protect against Kalashnikov automatic gun (protection level 3 according to Ukrainian standard). Equipped with viewing window and armored glass. They envisages availability of small wheels, tear gas capsule or lantern.

Intended for teaching and training of fighting skills at shooting. It is completed with targets, the equipment for weapon uplaoding and armored partitions (for protection against a ricochet).




Plastic anti-riot shield

Metal anti-riot shield

The anti-riot shield is made of a polycarbonate sheet givingmaximum vision, lightness and long durability, with the protection against UV-radiation, 10 year guarantee.

There is a shock-absorber with a grip and a belt on the inner side of the shield. Handgrip and arm fastening may be quickly rearranged and it permits to use the shield by left and right hands.

In accordance with the consumers order an inscription can be done at the front side of the shield and a polycarbonate sheet will protect it.

The anti-riot aluminum shield is designed for protection of police officers against stones and sticks while performing their duties.

The shield is made of high-quality aluminums alloy.

There are two handles glazed with plastics and two absorbers, which allow using the shield by left or right hand or by both hands simultataneousily.


Shield height, mm 1000

Shield width, mm 550

Mass, kg

at polycarbonate sheetthickness 3 mm

3,3

at polycarbonate sheetthickness 4 mm

4


Shield height, mm 1000

Shield width, mm 670

Thickness of the sheet, mm 2

Mass, kg, not more than 3,8

32


We make bullet-proof vests of external carrying of two styles:

We make a base bullet-proof vest from Kevlar or Tvaron with bullet-proof II-А, II or III-A (NIJ) levels. Additional steel or ceramic two plates with the size (25х30 cm) provide level of protection III or IV (NIJ).

Half of our products is made with changes «on request of the customer». On any of our bullet-proof vest we have possibility to place additional pockets for special means,handcuffs, radio stations and pistols.

The policeman

Army and a bullet-proof vest for special operations

Bullet-proof vests of external carrying MODULE



Protection is provided only with two plates in front and on a back. Color of a bullet-proof vest is chosen by the customer. The size of each plate – 25х30 cm.

Level of protection of a bullet-proof vest, weight and the price depend on the chosen plate.

II (NIJ) III-A (NIJ) III-A (NIJ) + protection against TT

bullets (with the steel core)

Material – aluminum alloy Material – Daynema Material – Daynema

Weight – 1,0 kg Weight – 0,5 kg Weight – 0,5 kg

The size – 25х30 cm The size – 25х30 cm The size – 25х30 cm

Bullet-proof vests of the semihidden carryingESCORT

Bullet-proof vests of underwear carrying GUARD

Provide protection at levels II-A and II (NIJ) at weight 1,5 – 2 kg with circular protection. Armor material – Kevlar, Tvaron or Daynema.

For increased level of protection the bullet-proof vest is completed with additional plates:

• Soft armored elements made of Kevlar, Tvaron or Daynema to provide level of protection III-A (NIJ);• Rigid armored elements made of aluminum alloy or Daynema for achievement of level of

protection III-A (NIJ) + protection against TT bullets (with the steel core).

34


BODY ARMORS:

«SHERIFF» IV

«KORSAR M3» IV «PANTSIR 3-95» III «BRONEKORSAR» IV

NIJ Standart 0101.04

ALL BULLET-PROOF VESTS:

• Body armor of outer wearing;• The body armor’s shape is optimized according to projection of vitally important organs; • According to requirements of customer it is determined material and color of facing cover,

arrangement of pockets on external covers;• The upper cover of the product is made of high-strength and wearproof fabric with

water-repellent coating.• It was issued health certificate;• Anti-traumatic layer.

«TELOKHRANITEL»

III-A

«TELOKHRANITEL mini»

III-A

«TELOKHRANITEL-M»

III-A

«TELOKHRANITEL-M3»

III-A

NIJ Standart 0101.04

All bullet-proof vests



Container for explosives transportation IZAT-1

Survive charge up to 600 grams of TNT equivalent with the shards of at least 1 / 3 the mass of the charge.

Products of IZAT-1 series are designed for the safe transport of explosives through public places, as well as for blocking suspicious objects covering them or putting inside the unit.

Fully holds fragments, 100% eliminating the defeat of people by shards around in close proximity (1 meter) of the product. Significantly weaken the effect of shock waves, sending up the explosion products. Products are supplied with briquettes and fire blanking gel, which eliminates the possibility of fire after the detonation of explosives.

Products are disposable, after the detonation of explosives in them, are destroyed, while the destruction of products takes most of the explosion energy.

Products were tested in the technical-explosion laboratory of the Research Centre of Forensic Expert Affairs of Ukraine in 2009 and recognized as a fully fit for usage in places of mass events.

Technical

characteristicsIZAT-2-200 IZA 1-2-400-360 IZA 1-2-400-250 IZAT-2-600

Survive chargeof TNT

equivalent of 200 grams (with shards of at (with shards of at least 1 / 3 the mass of charge)




Product weight not exceeding

30 kg 45 kg 40 kg 60 kg

Product dimensions

height 500 mm 500 mm 500 mm 500 mm

diameter 400 mm 400 mm 500 mm 500 mm

Cavity for storing

charge

depth 300 mm 300 mm 300 mm 300 mm

diameter 250 mm 360 mm 250 mm 250 mm

Colour of product black, orange black, orange black, orange black, orange

36


Blast engineer suit

Armored helmet

Armored helmet KASKA-1М

Class of protection – II, NIJ Standart - 0101.04Were used by peacemakers in Iraq.

Helmet SH-307

completed by visor with shock-proof glass.Class of protection – shock-proof.

The shot-firer’s protective suit is used during laying and discoveringexplosives and mine clearing.

The suit consists of a jacket, trousers and boots. The item ismanufactured ranging in three typical sizes. It is stocked with aremovable «visor» with bullet-proof glass (2nd class of protection) and a «Kaska (Helmet) – 1» bullet-proof Kevlar Head-Piece. The suit isdesigned with an electrostatic charge relieving device. The area of the protective fabric packets shielding: 242 sq.dc (2nd type size).

The area of the additional metal armourelements shielding : 23 sq. dm. Weight of the suit – not exceeding 30 kg. (2nd type size).

The design of the suit makes it possible for the user to take offquickly the jacket and the trousers owing to the peculiar patented side,shoulder and back fixing parts of the item.

The ballistic protection is ensured by the flexible protective Kevlar Pockets placed in the jacket, trousers and boots covers. Metal armour elements improving the protection level are additionally placed in the jacket (the neck, breast and groin parts) and trousers (the shin, and hip parts).

The suit had underwent field polygon testing. The item guaranteesprotection against being hit by F-l, RGD-5 grenades, a 240g TNT blast-ing cartridge within one meter distance.

The ballistic fabric armour pockets had underwent testing at the Du Pont Industrial Fibre Certified Laboratory /USA/ in accordance with the STANA G 2920 International Testing System.

The fact that the «KS-1» Suits were successfully used by a Sappersub-unit of the Ukrainian Ministry of Defense involved in clearing of mine areas in Lebanon with the UN mission bounds speaks in their favour.

The suit can be stocked with the video- and audio- communication system by the client’s request.

«КS-1»

«КS-1» model 2



SOKOL–3 Jammer

SOKOL-3 – Multi-Frequency Microwave Generator controlled by computer and hav-ing complex characteristics of time and amplitude for examination of chaos in electronic devices for the frequency from 15 MHz to 10 600 MHz SOKOL-3 with additional satellite downlink frequencies blocking modules is intended for the radio countermeasure of vari-ous radio means, radio communication channels of stationary, mobile and man-pack radio set, military radio-controlled armament systems, mobile phones reception paths of cellular communications systems, and also for protection of mobile vehicles (moving truck trains and single vehicles) and stationary objects by prevention of radio-controlled firing explo-sives (mines, high-explosive charges, etc.). The given problem is decided by the radiation of jamming radio signal in all frequency range, where use of the specified control radio links is possible. The system is developed on the basis and in view of operating experience of the product similar to destination which is used by the USA peace-making contingent in the Middle East. The use of this product has allowed neutralizing some attempts of radio-con-trolled firing at the movement of the truck trains (explosions have taken place after passing by the truck trains of the radio-controlled charge position outside of the radio countermea-sure zone).

POWER SUPPLY UNIT INCLUDING CONTROL

CABLE AND POWER CABLE

MICROWAVE UNIT

TESTED AND PROVED EFFECTIVE RANGE

OF PROTECTION OF SOKOL-3 JAMMER

IS 1000 METERS

PLACE OF INSTALLATION:

• SUVs;

• APCs;

• VVIP Cars.

APPLICATIONS:

• VVIP Protection;

• Force Protection;

• Vehicle Convoy Protection;

• EOD Operations;

• Event, Base or Venue Protection;

• Communications Jamming.

38


SOKOL–3 Jammer

SOKOL-3 Jammer consists of the following components:

1. Microwave Unit:

• Twenty-seven generating channels;

• Separate generating C and Ku-bands units;

• Four of broadband microwave TWT power amplifier;

• Six multi-managed switch;

• Unit of measurement and display of output parameters;

• A computer control unit;

• Antennas system

2. Power supply units;

3. Batteries unit;

4. Power cable;

5. Control cable.

ENVIRONMENTAL CONDITIONS OF

OPERATION:

• Temperature range (outside) – from - 50 to 600C

• Humidity – up to 95 %

• Atmospheric pressure – from 630 to 800 mm mercury column

EACH OF 27 FREQUENCY CHANNELS OF THE JAMMER:

1. Has a generator of harmonic signals, tunable in the frequency band corresponding to the channel number;

2. Has a noise generator, overlapping the frequency band of the concerned channel;

3. Has a separate noise generators for c-band and Ku-band up to 14 800 MHz;

4. Has a separate generator of harmonic signals, tunable in the frequency band corresponding to the C-band and Ku-band up to 14 800 MHz.

TECHNICAL PARAMETERS:

• Jamming range – from 15 MHz to 18 500 MHz

• Output power – not less than 1050 Watt

• Accuracy of frequency setting – not less than 1 MHz

• Range of adjustment of the output power – 0 … 20 dB

• Parameters of the pulse signals:

• Minimum signal duration – 50 nanosecond

• The minimum pulse period / pulse repetition cycle – 100 nanosecond

• Maximum number of the pulses during one cycle – 1024

• The level of suppression of higher harmonic – min 40 dB

• Power supply – not more than 2 000 Watt

• Dimensions microwave unit – 485x470x380mm

• Dimensions C and Ku-band unit 485x470x380mm

• Weight of the microwave unit – 35 kg

• Weight of the C and Ku-band unit – 32 kg

• Dimension of the power supply unit – 485x470x380mm

• Weight of the power supply unit – 30 kg

• Weight of TWT amplifier unit – 150 kg

• Weight of power supply TWT amplifier unit - around 150 kg

• Total Weight of the SOKOL-3 Jammer – around 450 kg

SOKOL-3 JAMMERS PROVIDES:

• Real-time jamming / suppression through the complete frequency range;

• Field programmability for rapid adjustment;

• Modular construction for easy maintenance, repair and upgrade;

• Efficient power management and power supply

ALL COMPONENTS OF THE SYSTEM

ARE CERTIFIED IN ACCORDANCE

WITH MILITARY STANDARDS

THE MULTI-FREQUENCY GENERATOR

SOKOL-3 IS CAPABLE TO OPERATE

CONTINUOUSLY NOT LESS THAN

20 HOURS WITH SUBSEQUENT

BREAK ON 1 HOUR



Counter-surveillance equipment

PLASTUN-3D mobile system

The PLASTUN-3D-MOBILE System is intended for electronic protection of premises. The System makes detection of presence of electronic bugs which use radiofrequencies, infrared range, wiring communication and power supply lines for transmission of collected data / information.

The PLASTUN-3D-MOBILE System is mounted in “Peli” case and it is intended for special inspec-tion procedures.

A key feature of the System is an unlimited accumulation (limited by disk memory space only) of radiofrequencies surrounding measurements and their storage in a server database.

The PLASTUN-3D-MOBILE System allows to make direction-finding of radio-radiation source us-ing accumulated data from database. There is a display mode showing detected sources of radiation on the plan of premises or terrain in real time with their characteristics and review.

40



Manportable direction finder FILIN

111L1 LIS radar is designed for detection of moving people and vehicles, low-flying slow targets and surface marine targets for security and reconnaissance support. Radar provides automatic detection and location of targets at any time of the year under conditions of rain, fog, precipitation, smoke or dust, in abscence of optical visibility. The targets are displayed on the LCD indicator together with azimuth and range data.

Man portable direction finder Filin is designed for search and detection of RES signals operating in the frequency band of 1,5 – 1300 MHz and also for position location of them involv-ing operator.

Using functional capabilities of the receiver Man portable direction finder Filin provides operative direction defining to RES by means of signal level measurement while operator’s movement in the azimuth plane of antenna module using built into the Carrier signal level needle indicator with linear scale.

Presence of additional attenuator included into product’s set provides efficient operation of direction finder in the near-field region when searching for powerful sources.

Antenna modules V3 and U3 provide directional signal re-ception when mounting them over the bullet-proof vest.

Power supply is provided from inner battery/accumulator.




Scan Zones:

– in azimuth (-60...+60) with possibility of ran-dom sector reducing

– in range (0-15) km with possibility of random scan zone selection within a given range

Full Scan Time (120°, 15 km) - 25-30 sec

Target detection range (radial speed

2 - 50 km/h)

– single person 5 km

– vehicle 10 km

– armored vehicle 10 km

– ship 10 km

Radar resolution range

bearing 1°

range 15

Power consumption not more than 65 W

Operation temperature range -30°C...+60°C (-20°C...+50°C for re-mote display)

Radar weight with leveling platform not more than 40 kg

Setting-up procedure does not exceed 5 min

Digital forming methods of signal, filtering, automaticdetection and coordinates measurement are used. Targetrecognition mode allows to specify target range and itsdirection and after listening to the specific sound spectrum of a signal to classify the target (man, group, vehicle, helicopter, jam etc.). The basic version is designed to allow the radar installation on the vehicle and includes facilities for automatic antenna system leveling using data from builtin accelerometric horizon sensors. The radar can be installed on APC or ACV.

The radar’s operation is harmless to the human’s body. The millimeter’s bandwidth doesn’t create interferences with other

radio-technical systems and is not influenced by interferences of other systems because there is no equipment working in this bandwidth. Millimeter bandwidth beam is less influenced by water surface than the beam of centimeter bandwidth. This enables more precise small-target detection of water targets.


42


Surface short range radar BARSUK

Portable radar 112L1 BARSUK was designed for detection of moving personnel andvehicles (patrol version) with the aim of reconnaissance or protection of territory.

It provides detection of the targets round the clock under low visibility conditions (rain, fog, snow etc.). Detected targets are reflected at built-in indicator in form of amplitude of the signal with mark of range. Recognition mode allows to specify range and azimuth of the target and classify it by acoustic spectrum (single person, grop of persons, animal, vehicle). Solid-state transmitter of the radar implemented in microstrip version. Low weight of the radar allows to carry it on the operator’s chest and survey area of view by rotation of body. This radar is handy for search and pursuit of intruders.


View area

– azimuth 0-360°

– range 0-2 km

Detection range of targets with radial veloc-

ity 2-50 km/h

– single person 1200 m

– vehicle 1600 m

– armored vehicle 2000 m

Resolution

– azimuth 1,5°

– range 25 m

Frequency 36 GHz

Transmitter power 60 mW

Antennae aperture 90 mm

Power source - built-in rechargable battery 12 V, 3 Ah

Power consumption 8 W

Operating temperature range - 30 ... + 50°C

Wind speed up to 15 m/s

Weight with battery 5,5 kg



Surface short range radar BARSUK-A

Radar 112L1-A BARSUK-A is surface radar of remote guarding mounted on a support-rotatingdevice with remote cotrol of azimuth and elevation angles provides automatic detection andrecognition of personnel and ground and water moving vehicles. It provides security of specified responsibility zone round the clock and all the year round under restricted visibility conditions. RS-422 (485) is used for data transfer. Targets detection and identification occures in automatic mode at the same time targets marks displays at monitor. Targets data are automatically logged specifying their number, range, azimuth and class (personnel - vehicle) snap to map. There ispossibility to choose high alert and blank areas manually. Possibility of recognition via soundchannel is provided. The product outputs electronic alarm information to the monitor of central guard console. The product operates in millimeter band which practically harmless for humanorganizm, does not interference with other radio means, does not interfere with the other same product if operating at the distance more than 50 m and is not sensitive to accidental or non-random interferences.


Scanning area:

– in azimuth 360°

– in elevation +15°

– in range 0 - 1.6 km

Detection range of targets moving with radial

velocity of 2-50 km/h

– single person 1.2 km

– vehicle, ship 1.6 km

– armoured vehicle 1.6 km

Radar resolution

– by angle 3°

– by range 25 m

Frequency 36 GHz

Transmitter's power 60 mW

Rotation speed (4-20)°/s

Type of radiated signal continuous with phase code modulation

Antennae aperture 90 mm

Operating temperatures from - 30 to + 50°C

Relative humidity up to 100%

Wind speed up to 25 m/s

Weight 10 kg

44


Radar MANGUST is designed for surface and low-speed (low-flying) target detection and can be used for secure of land and water frontier areas, combat field observation. Hardware of this portable radar placed in 2 packs and can be transported and serviced by 2 men.

Radar provides targets search, detection and mapping automatically in continuous radiation mode (millimeter band). Target detection and localization generates by operator’s consoleproseccor. The console’s display shows circle diagram and table, featuring number of thetarget, it’s range and azimuth. High alert and blank area can be set up by operator. Low-powersolid-state transmitter (0,01 - 1,0 W) makes difficulties for electronic reconnaissancedetection. Continuous radiation with phase-code manipulation makes it protected of clutter and jamming. The radar’s operation is harmless to the human’s body. Its millimeter’s bandwidth doesn’tcreate interferences with are the radio-technical systems and is not influenced byinterferences of other systems because there is no equipment working in this bandwidth.Millimeter bandwidth beam is less influenced by water surface than the beam of centimeter bandwidth. This enables more precise small-target detection of water targets.


View zone azimuth 360° and sector scan

Range (km)

person 5

car 7

armored vehicle 10

ship 10

Resolution

azimuth (deg) 1

range (m) 15

Power source

primary source accumulator 12 V

power consumption (W) 65

Operational conditions

temperature (°C) -30 +50

Mobility

weight 40 kg in two packs, 20 kg each

setting-up time (min) 5

remote control distance (m) 50

Surface target detection radar MANGUST



The mobile radiomonitoring system ARGUS-M2

The Mobile Radiomonitoring System (MRMS) ARGUS-M2 is designed for automatedmonitoring of radio-frequency spectrum,measurement of different parameters ofelectromagnetic emissions and radio signals, and for online direction finding of transmitters and radioelectronic systems outside the availabilityzones of fixed DF and radiomonitoring stations.

M R M S A R G U S - M 2 i s b a s e d o nhigh-performance measurement equipment o f t h e R O H D E & S C H WA R Z ( G e r m a n y )company:

• R&S FSP30 spectrum analyzer;• R&S EB200 monitoring receiver;• R&S EBD195 direction finder processor;• R&S HE010 and R&S HE500 monitoring antennas;• R&SADD195andR&SADD071 DFantennas;• R&S AC008 microwave directional antenna;• R&S HE200 portable directional antenna;• R&S ARGUS-IT spectrum monitoring and managementsoftware;• R&S Map View geographic information software.MRMS ARGUS-M2 ensures achieving following tasks:• systematic monitoring and measurement of the radio stations parameters (level, frequency,

offset, deviation, fieldstrength and power flux density, bandwidth, modulation parameters);• measurements for EMC (electromagnetic compatibility); • identification of the interference sources.


Operating frequency ranges:

direction finding moderadiomonitoring mode

20.. .3 000 MHz 20... 26 500 MHz

Instrumental error of DF in frequency 20... 80 MHz80.. .1 300MHz1,3. ..3 GHz

2 degree1 degree2 degree

Sensitivity at frequency of 1 GHz -145 dBm

Average positioning error less than 15m

Power supply systems: in the mobile mode in the fixed mode

12V/ 24V DC 220 VAC (external

Max power consumption 1000W

Time to establish an operating mode less than 15 min

Operating temperature (inside a car) +5...+55°C

Maximum dimensions, WxHxD 2242x2650x5290 mm

Maximum height with deployed mast 9450 mm

Weight with driver 2870 kg

46


To monitor satellite communications system THURAYA

1. The mobile variant of a system is intended forreception in a duplex mode of one subscriber in one beam. Under «beam» we shall understand a pool marked by onenumber in a grid of frequencies THURAYA;

2. Reception of the subscriber is made in two basic modes:

• With a priority under the list of selection;• Without a priority, by a principle – the first conversation;3. The following types of signals can be received: speech,

data transmission and facsimile messages;4. Decoding information of algorithm GMR-2;5. While report formation, the following information is

registered in a database:• Time of the beginning of a session;• Working frequency;• Type of transfer;• Temporary number;• Geographical coordinates;• Number of a pool of frequencies Thuraya;6. Listening of speech, viewing of the given and facsimile

messages with an opportunity of their printing (the printerdoes not enter into the complete set of delivery) isprovided;

7. The complex is placed in the casing of АСМЕ II-852 type or similar.8. A power supply of 110-230 Volts:9. Structure of a complex: • The remote aerial with length of a cable not less than 5 meters; • LNA (amplifier); • Receiver – 2 pieces • Board of the basic generator; • Notebook for manufacture of calculation; • The casing of type ACME I-852 or similar; • Mother board ; • Board of digital processing of a signal on the basis of DSP 320C6416 with clock frequency

not less than 1 GHz, including 4 ADC and 4 DDC on 4 physical channels everyone;10. The software operates in WINDOWS 2000/XP;11. The program of decoding work under control of OS UNIX;12. The block of reception and demodulation should be connected with notebook through a

network by IP/TCP;13. The complex can be transported by one person;14. Start - up – Time of system – no more than 15 minutes.

Mobile interception system 5V - THURAYA M



Jammer is intended for blocking of the mobile phone receiving channels of the communication systems operating in the digital CDMA standards

VOYAGE 0819 VOYAGE 0918

Jammer is intended for blocking of the mobile phone receiving channels of the communication systems operating in the GSM standards

Note: The operating frequency range can be changed by agreement with the customer.

Technical characteristics VOYAGE 0819 VOYAGE 0919

Jamming signal frequency bands 869 - 895 MHz 2125 - 2170 MHz

925 - 960 MHz1805 - 1880 MHz

Type of jamming FM - barrage with optimal structure

Power potential 230 W 30-45 W

Gain factor of built-in flat antenna array 10 - 12 dB

Jamming range in the sec tor of maximum radiation pattern (~50°), depending on the distance to the base station

50 - 200 m

Power supply from the internal battery, mains electricity 220 V, 50 Hz

Continuous operation up to 8 hours

Dimensions 505х390х150 mm

Mass from 5 to 12 kg (depending on battery type)

Operating temperature degrees C° from -50 to +50 degrees C°

Mobile phone jamming systems VOYAGE

48


Forensic case SV-2

94 items, the maximum set with digital camera, shockproofplastic case 370х290х430 mm., withstands static loads up to 80 kg

Forensic case SV-0,5

48 items, a digital camera with 2Gb RAM (aluminum case 380х260х120 mm). Case additionally strengthened by aluminum frame. Internal LED backlight (10 pieces)

Forensic case SV-1

80 items, aluminum case 450х350х170 mm. Case additionally strengthened by special frame. There is internal LED backlight (10 pieces). Specifically designed for the urban environment.

Forensic case OMP-1

33 items, aluminum case 330х210х90 mm. It is designed forphoto documentation of the crime scene.

Set BRIBE-3

19 items, set of preparations for applying invisible marking, aluminum case 330х210х90 mm

Set BRIBE-2

10 items, set of preparations for applying invisible marking

Set BRIBE-1

7 items, set of preparations for applying invisible marking

Forensic cases



Unmanned air observation complex 1E


Air observation complex includes:

• Unmanned aerial vehicle;• On-board system of automatic control;• On-board video camera; • Ground station of control and monitoring.

Unmanned aerial vehicle is designed forobserving ground situation. It is performingsemi-automatic flight when controlled by ground station operator and automatic flight on agiven route. It can take pictures with theon-board camera and transfer video from the camera to the ground station.


Takeoff Weight 4,8 kg

Wingspan 3,1 m

Fuselage length 1,4 m

Flight speed 70 km / h

Flight height up to 1 km

Payload up to 0,7 kg (camcorder, camera)

Thrust propeller Power


Takeoff Weight 7 kg

Propeller diameter 1,48 m


Flight speed 0 - 54 km / h

Payload up to 1,6 kg (High Resolution Camera)

Flight duration 15 minutes

Thrust propeller power (Li-Po batteries)

Launch and landing semi-automatic

50



Unmanned air observation complex MR6

Unmanned aerial vehicle is designed forobserving ground situation. It is performingsemi-automatic flight when controlled by ground station operator and automatic flight on a given route. It can transfer video from the video camera to the ground station.

Unmanned aerial vehicle is designed forobserving ground situation. It is performingsemi-automatic flight when controlled by ground station operator and automatic flight on agiven route. It can take pictures with theon-board camera and transfer video from the camera to the ground station.






Payload up to 0,3 kg (Video Camera)


Thrust propeller power (Li-Po batteries)





Number of rotors 6

Diameter 1 m


Payload up to 1,5 kg


Thrust propeller power (Li-lon batteries)




Surveillance and reconnaissance UAV R-100

R-100 executes a real-time observation and is used in daytime, in night time, in conditionof bad visibility or its full absence. Day night IR cameras or scanners are fixed on board.Videodata and telemetry are transmitted to the control point (or the other user) in real-time or may berecorded onboard. The flights can be executed under program, or in remote control mode by operator. Time of preparing R-100 to flight is not more than 5 minutes. Take-off – fromcatapult, landing – to net, with parachute (emergency mode) or on small ground area.

• Possible side wind under take-off – 10 m/sek.• Lenght of start catapult – 3-6 m• Landing grid-trap – 2,5 * 6 m

• Dimensions – 1,8 * 1,4 m

Power plant One cylinder

2,5 h.p

Two cylinders

3,5 h.p.

One cylinder

6 h.p.

Two cylinders

12 h.p.

Endurance of flight (hours), up to 4 3 2 2

Weight of gasoline (kg), up to 4 6 8 9

Payloads (kg), up to 3 5 8 10

Speed (km/hour) 45-190 50-220 60-290 70-400

Max. Take-off weight (kg) 14 18 25 35

Max. Altitude of flight (m) 2000 2500 4000 5000

52



Unmanned Aircraft Complex CHIZH-L on the generally accepted classification of military Un-manned Aerial Vehicles (UAV) belongs to the class of tactical short-range systems to meet the requirements of aerial surveillance, reconnaissance and target designation. For the Military purposes can be used as part of the intelligence information systems of the company, battalion and an artillery battery level.

When designing the complex originally envisaged the possibility of its limited use in the open air space for the action of special units to meet the challenges of aerial surveillance in emergency management, supporting counter-terrorist, security and search operations.

Specification of the complex CHIZH-L:• modularity of the aircraft and payload - 7 basic options of payload; • simultaneous synchronous flight (formation) up to 4 UAVs;• modularity and high mobility of complex; • all-season, 24-hour, off-airfield;• the possibility of flights to areas with difficult terrain (mountains) and over the sea (take-off

and landing on a ship);• high availability of complex systems;• redundant radio channels to UAV (VHF range and satellite system «Iridium»);The unmanned aerial vehicle has a modular design. It’s made of composite materials to provide

low visual, acoustic, thermal and radar visibility. The power plant is based on 2.5 hp two-stroke piston engine

UAV flight can be performed offline on the programmed route within a radius of 200 km from the ground control station or in real time within a radius of 50 km in the mode of remotemanagement and control.

The entire complex, including ground support equipment are packed in compact containers for the transportation, which ensures a maximum mobility when using any type of transport.




The complex is easy to maintain, can be applied to unprepared terrain and does not require special infrastructure.

Complex structure• UAV (from one to five) in shipping containers; • Ground control and surveillance station in a secure briefcase:• Ground radio terminal; • Ground power supply system;• catapult launcher;• Set of spare parts and auxiliary equipment.Complex functioning

The operation of the complex is supported by the team of four: a pilot-operator, a videosurveillance operator, a mechanical engineer and an electronic equipment specialist.Deployment time of the complex for the start position does not exceed 30 minutes.

The aircraft takes off from a catapult launcher and performs the parachute landingcompletely automatically. The onboard computer manages the autonomous aircraft return in case of the command channel failure as well as the automatic emergency landing in case of a critical system fault, which assures the safe flight.

UAVs payload.

High-resolution color video camera, digital photo camera, infrared camera, video channel transmitter with antenna. The entire payload is placed in an easily replaceable nose module that provides different configuration options to broaden the scope of mission tasks.

The on-board computer system.

Provides an automated control, navigation, management and diagnostics. It is based on the inertial navigation system with a GPS correction. The UAV is either controlled by apre-programmed set of three-dimensional waypoints, or switched into a semiautomatic mode to be controlled from the ground.

The ground Control Station.

Provides mission planning, preflighl on-board and ground systems diagnostics, aircraft equipment monitoring, (light and payload control, receiving and processing the surveillance video and photo data. Two operators manage up to four aircraft simultaneously.


Length 1.67 m

Wingspan 2.0 m

Take-off mass 13 kg

Payload mass 1.0 kg

Endurance 5 hours

Range Up to 200 km

Cruise speed 110 km/h

Max speed 180 km/h

Ceiling 6000 m

54



Multi-purpose aircraft system for aerial surveillance, reconnaissance

and monitoring based on miniature unmanned air vehicle.The portable unmanned aerial system based on a VOROBEY-M (SPARROW-M) mini-UAV

performs a wide range of surveillance and reconnaissance missions, including the antiterrorist and emergency operations, as well as the Earth surface and atmosphere monitoring. The air vehicle can be equipped with photographic, television, infrared and acoustic equipment along with radiation, chemical and other special sensors of modular design.

Vorobey-M mini-UAV characteristic features:• Long flight endurance• Up to 20 km mission range• Permanent operation availability• Complete autonomy and ease of operation• Stealthy deploymentThe air vehicle can take off and land at unprepared constricted areas and is able to cruise on

the route and loiter over a designated area for a long time. The aircraft takes off using a bungee cord and then automatically lands into a special compact recovery device.

Equipped with an electric power plant, the VOROBEY-M mini-UAV has integrated aerodynamic layout. Its airframe is made entirely of modern composite materials.

The small size of the air vehicle and low noise of its electric power plant provide stealthydeployment. Two aircraft together with the ground equipment get packed into a single small portable container.





Length overall 600 mm

Height overall 150 mm

Wing span 1050 mm

Maximum take-off weight 2.5 kg

Maximum payload weight 0.3 kg

Engine type electric

Engine power 350 W

Flight speeds:

– max level 130 km/h

– cruising 90 km/h

– loitering 65 km/h

Maximum rate of climb 7 m/s

Service ceiling 3500 m

Maximum endurance:

– in loitering mode more than 1.5 h

– in cruising mode 1.0 h

The navigation, control and management systems provide the aircraft flight control and itsonboard equipment operation, in either a pre-programmed autonomous or an automatedremote mode. The mission plan can be reprogrammed during the flight. The command-telemetryand video channels provide two-way radio communication between the UAV and groundcontrol station.

Due to the considerable automation, the UAV system is easy to operate and can performcomplex surveillance and reconnaissance missions under day-time and night-time conditions without the operator having special flight skills.

56



Vertical take-off and landing miniature unmanned air vehicle.

The portable unmanned aerial system based on a VOROBEY-M VTOL (SPARROW-M VTOL) mini-UAV performs a wide range of surveillance and reconnaissance missions for support of antiterrorist and emergency operations within the industrial and urban environment. The air vehicle can be equipped with photographic, television, infrared and acoustic equipment along with radiation, chemical and other special sensors of modular design.

VOROBEY-M VTOL mini-UAV characteristic features:

• Vertical take-off and landing

• Ability of hovering over an observable object

• Permanent operation availability

• Full autonomy and simplicity of operation

• Stealthy deployment

• Up to 10 km mission range





Length overall 600 mm

Height overall 200 mm

Wing span 1050 mm

Maximum take-off weight 3.0 kg

Maximum payload weight 0.3 kg

Engine type electric

Engine power 600 W

Flight speeds:

– max level 160 km/h

– cruising 90 km/h

– loitering 30÷65 km/h

Maximum rate of climb 12 m/s

Service ceiling 3000 m

Maximum endurance:

– in loitering mode 45 min

– in cruising mode 30 min

– in hovering mode 15 min

The air vehicle can take off and land vertically at unprepared constricted areas and is able to cruise on the route, loiter over a designated area for a long time and hover in a defined airspace location. The capability of UAV hand launch and recovery is envisioned.

Equipped with lift-cruise electric power plant, the VOROBEY-M VTOL mini-UAV has integrated aerodynamic layout. Its airframe is made entirely of modern composite materials.

The small size of the air vehicle and low noise of its electric power plant provide stealthydeployment. Two aircraft together with the ground equipment get packed into a single small portable container.

The navigation, control and management systems provide the aircraft flight control and itsonboard equipment operation, in either a pre-programmed autonomous or an automatedremote mode. The mission plan can be reprogrammed during the flight. The command-telemetryand video channels provide two-way radio communication between the UAV and groundcontrol station.

Due to the considerable automation, the UAV system is easy to operate and can performcomplex surveillance and reconnaissance missions under day-time and night-time conditions without the operator having special flight skills.

58


ARMORED VEHICLES



ARMORED VEHICLES

60


Armor kits for civil vehicles

Armor kit are intended for transformation of the ordinary car in bullet-proof vehicle by means of armor plates and ballistic glasses. These elements are established in a passenger compart-ment and turn it into the bullet-protected capsule. All elements are welded among themselves and create a uniform bearing design, thus durability of a body of the car increases.

Ballistic glass is manufactured by “Practika” and constructed using polycarbonate, thermo-plastic sheeting, and layers of laminated glass. Armor plates are made from Sweden armor steel Armox 500T.eel Armox 500T.

Possible variants of vehicles to arm on:Ford Expedition

Toyota Land Cruiser 80Toyota Land Cruiser 90

Toyota Land Cruiser 100Toyota Land Cruiser 105Toyota Land Cruiser 200

ATTENSION! All cars can be armored by forc-es of the customer himself, however before it is necessary to take training course with the stuff of “Practika”



Ambulances

1. Base car*

* - special complication for ambulances (enforced generator, soft suspension etc.)

Mercedes

Sprinter

VW

Crafter

Ford

Transit

Peugeot

Boxer

Inner length, mm 3265 3265 3390 3120

Inner width, mm 1780 1780 1762 1870

Inner height, mm 1940 1940 1985 1932

Engine, dm3 2,1 2,5 2,4 2,2

Power, h.p. 116 109 115 130

Max. speed, кm/h 145 140 135 150

Acceleration, sec. 15,1 14,1 13,9 14,0

Fuel con., l 9,6 8,1 9,5 9,2

ABS + + + +

ESP + + + +

62


2. Refitment works

2.1. Medical compartment

2.1.1 Sound insulation

2.1.2 Thermal insulation

2.1.3 Vibration insulation

2.1.4 Strengthening of walls and ceiling

2.1.5 Reinforcing of the central part of a ceiling for the evacuation-ventilating hatch

2.1.6 Installation of mortgages for plastic panels

2.1.7 Installation of mortgages for arms of medical devices

2.1.8 Installation of arms of medical devices with possibility fast taking off

2.1.9 Install fasteners for scoop stretcher

2.1.10 Install fasteners for spine board

2.1.11 Arm installation for lateral doctor seat

2.1.12 Arm installation for headboard doctor seat

2.2. Floor of medical compartment

2.2.1 Waterproof gasket by plywood

2.2.2 Anti-static, anti-sliding, steady against influence of disinfectants floor covering

2.2.3 Border on the lower part of fiberglass panels with sealing of seams

2.3. Ceiling of medical compartment

2.3.1 Ceiling plastic panel of fiberglass with the lowered speed of burning (100 mm/minute)

2.3.2 Holders for droppers

2.4. Partition between compartments

2.4.1 Partition between a cabin and medical compartment with a movable window leaf

2.5. Windows

2.5.1 Glazing of rear doors

2.5.2 Glazing of side door with a movable window leaf

2.5.3 Pasting of glasses by a tinting film for providing of patient’s privacy

2.6. Elements of support

2.6.1 Hand-rails at an aperture of a side door

2.6.2 Hand-rails at an aperture of a rear doors

2.6.3 Rear footboard

2.7. Heating and ventilation

2.7.1 The ceiling multiitem hatch for ventilation and evacuation

2.7.2 Ceiling exhaust blower

2.7.3 Independent heater for work in winter conditions (up to -20°С)

2.7.4 Independent conditioner for medical compartment

2.8. Electric equipment

2.8.1 Diode lamps for illumination of medical compartment

2.8.2 Dot lamps over a surface of a main stretcher

2.8.3 Lamp for the illumination of the adjacent territory of a side door

2.8.4 Lamp for the illumination of the adjacent territory of a rear doors

2.8.5 Additional accumulator battery

2.8.6 The switchboard for association of two (base and additional) accumulator batteries



2.8.7 The charger for the accumulator battery

2.8.8 Electric sockets 12V

2.8.9 Electric sockets 220V

2.8.10 Tension converter 12/220V

2.8.11 Tension converter 220/12V

2.8.12 Power supply of an external network 220V with the protected plug socket

2.8.13 Cable of a external power supply

2.8.14 The relay interfering start of the engine at the connected external power supply

2.8.15 Lamp of outside illumination for searching for numbers on houses

2.8.16 Panel of the general management of electrosystem, ventilation, heating and lighting system

2.9. Gas system

2.9.1 Pipelines under a salon covering

2.9.2 Two 10-letres oxygen cylinders with an arm of fastening and reducers

2.9.3 Extended gas terminal with gas sockets

2.9.4 Flowmeter

2.9.5 Humidifier for saturation of oxygen by particle of water

2.10. Seats

2.10.1 Rotary headboard doctor seat with seat belts

2.10.2 Rotary lateral doctor seat with seat belts and fixing in two positions

2.11. Furniture

2.11.1 Plastic panel along the left board from fiber glass of the lowered speed of burning (100 mm/minute)

2.11.2 Plastic panel along the right board from fiber glass of the lowered speed of burning (100 mm/minute)

2.11.3 Locker in a rear part for gas cylinders with fastening

2.11.4 Racks with roll-shutters in panels

2.11.5 Three niches for storage of bags

2.11.6 Racks with a skirting, loss of contents at movement

2.11.7 Lockers for medical drugs

2.11.8 Box with thermoelements for storage of infuzion solutions

2.11.9 Table with rounded-off edges

2.11.10 Niche for a chair stretcher with fastening

2.12. Special signals

2.12.1 Signaling Speaking Device with a blue light signal and system of external translation of speech

2.12.2 Fluorescent pasting of the car the special it according DSTU 7032

2.13. Other

2.13.1 Installation of armor plates and ballistic glasses (defense class – as per Customer’s requirements. Ballistic glass is manufactured by “Practika” and constructed using polycarbonate, thermoplastic sheeting, and layers of laminated glass. Armor plates are made from Sweden armor steel Armox 500T).

2.13.2 Preparation for radiostation

2.13.3 Walky-talky

2.13.4 Intercom for ensuring communication between a cabin and medical compartment

2.13.5 Fire extinguisher in a cabin

2.13.6 Fire extinguisher in a medical compartment

2.13.7 Tripod for a dropper figurative

64


TRAINING OF COUNTER-TERRORIST UNITS

State Enterprise “SpetsTechnoExport” is in a position to offer services on special training ofcounter-terrorist units to protect from terrorist threats and to fight with terrorist units and its destruction, services on securing of mass events, on securing & protection of different types of objects as well as on body guarding of VIPs.

Trainings are provided by many years experienced staff of special counter-terrorist units of the security service of ukraine and the of state guarding service of Ukraine, that ensuring the state security as well as providing body guarding of Ukrainian state VIPs.

Based on decades of experience in personnel special training of counter-terrorist

units in Ukraine, State Enterprise “SpetsTechnoExport” is in a position to offer:

1. Audit the current existing customer’s state counter-terrorist system and the level ofattainment of special units;

2. In case of non-availability of complete state counter-terrorist system and specialcounter-terrorist units at customer’s side, respective suggestions and proposal for creation of the same could be provided;

3. Basic training of counter-terrorist units;

4. Training of commanding officers of special counter-terrorist units;

5. Special training programs on the various specialties. Training programs are elaborated on basis of the following aspects:

5.1. Requirements for specific units / troops;

5.2. Level of attainment of personnel and commanding officers;



5.3. The status of material and technical basis of special Units;

5.4. The logistic support of counter-terrorist units;

5.5. The type of main tasks / missions as well as the type of environment:

5.5.1. Types of main tasks / missions:

• hostage release;

• capture / seizure of well-trained and organized terrorists and dangerous special criminals;

• ensuring the safety of individuals or objects;

5.5.2. Types of environment:

• Urban environment;

• Forests;

• Mountains;

• Deserts and savanna.

Full training program of counter-terrorist units is a multistage and is divided into the

following stages:

1. Introductory training;

2. Basic training;

3. Training of commanding officers;

4. Personnel training on the following discipline:

4.1. firing / shooting training;

4.2. special engineering training;

4.3. special tactical training.

5. Training of well skilled experts in the following fields:

5.1. Snipers;

5.2. Sappers;

5.3. Tutors & trainers;

5.4. Bodyguards.

Besides direct training of customer’s special forc-es the State Enterprise “SpetsTechnoExport” is in a position to offer the ways of optimization ofexisting customer’s counter-terrorist units office organization as well as to assist and coordinate in carrying out of different field maneuvers.

following

cial forc-xport” is zation ofits office dinate in

Proposal for the organization and trainingof counter-terrorist units

STATE FOREIGN TRADE ENTERPRISE«SpetsTechnoExport»

7, Moscowsky Av., Kyiv, 04073, UkraineTel.: +38 (044) 568 50 72 Fax: +38 (044) 568 52 70
