Transcript

EWELINK GUIDEIOS – Iphone/Ipad

Overview

Basic Functions:

1 10of

EWeLink is a smart home control APP that can control all ITEAD and UbiCloud home automation devices and connected products. The smart home devices connect to home appliances and electronic devices via WiFi, allowing you to remote control though APP eWeLink. With eWeLink, users can control and manage more than 80 brands and over 100 types smart home devices.

● Remote on/off● Countdown/schedule timer● One-key sharing● Group/scene management● Add smart home devices to the eWelink account, users control and add devices via

the app.● Download the iOS version from the Apple store. One can also download the App

from Coolkit by scanning the code below.

2 10of

Regristration and Log in:

Ewelink supports multiple languages including English, Danish and Russian as well as simplified Chinese.

You will receive a verification code by email.

At start up, press Register Type in an email address and press Next

3 10of

Regristration and Log in:

Type in the verification code from the email and a password, minimun 8 characters, and press register

Registration successful, press OK

4 10of

Regristration and Log in:

Log in with user name (email address and password Press Login

Press Understood

5 10of

WiFi Pairing and Adding Devices:

Ewelink monitors status of and controls devices through a cloud server. This means that all devices must first be connected to a WiFi router. It also means all devices must be paired with router and added to the eWelink account.Apple devices must be connectet directly to the device to be added first. Afterwards begin the process of adding devices.

Press the + sign to add a new device. Press and hold the pairing button on the device to be paired for about 5 seconds. You should see that the LED blinks quickly indicating it is in pairing state.

From this screen activate the device and press next

6 10of

WiFi Pairing and Adding Devices:

Choose the ITEAD-xxxxxxxxxx device and use password 12345678

From this screen go out of the App and go into Apple Settings -->WiFi

7 10of

WiFi Pairing and Adding Devices:

Go Back to the Ewelink App and press Next.

Confirm and/or correct Wifi router name and password and press Next.

8 10of

WiFi Pairing and Adding Devices:

Wait for pairing process to complete. Rename and press Complete.

9 10of

WiFi Pairing and Adding Devices:

Press Successful.

10 10of

WiFi Pairing and Adding Devices:

After adding, the devices wil be available in the device list.

● See which devices are on or offline.● See the WiFi signal strength of each device.● See if there are updates available.● Turn the device on and off by simply tapping on the device icon.● Make timing schedules.● Share the device with other users.


Recommended