Key Skills Profile SummaryApproved Plumbing / Piping Inspection Engineer with B.Tech. (Mechanical Engineering), leveraging nearly 20 years of dynamic career in Quality Assurance & Control & Piping OperationsCurrently associated with GIS Bureau Veritas (Aramco Approved) Jizan economical city Baish, Saudi Arabia as Underground Piping and Plumbing EngineerAcknowledged for working as QA/QC, Mechanical, Plumbing, HVAC Engineer in construction/commissioning activitiesAccomplished the timely closing of techno-commercial evaluation of contract, along with ensuring a timely delivery as well as engineering & technical compliance with contractorsExpertise in developing conceptual design & piping item as per codes and standards of piping entailing drawings & specification study, vendor selection & finalization, schedule for development, tool modification and final approvalProficiency in reviewing project specific Inspection and Test Plan (ITP), reviewing procedures and maintaining QC documentation to ensure adequate documented evidence is available to prove contract complianceProven skills at maintaining extensive knowledge of building codes, specifications and effectively supervising, training & scheduling company employees with contractors & subcontractors to mediate conflicts
Soft Skills
EducationB.Tech. in Mechanical Engineering from Preston University, Kohat in 2006 with 82%Associate Engineering (Mechanical) from Govt. College of Technology, Faisalabad in 1996 with 58%
IHSAN UL HAQ
Piping/Mechanical Plumbing & HVAC(Quality Assurance / Piping Design & Engineering)
Industry Preference: ConstructionLocation Preference: Gulf
0966566728723, 0966550478486, 0923350179394 [email protected]
Quality Assurance & Control
Piping Engineering
HVAC & Plumbing
Installation & Commissioning
Testing & Inspection
Mechanical Engineering
Project Management
Technical Bid Evaluation
Instrumentation & Designing
Change Agent
Collaborator
Communicator
Motivator
Planner
CertificationsAPI-570 (Process Piping Inspector) Dammam, KSA, valid up to 2018API-510 (Pressure Vessel Inspector) Dammam, KSA, valid up to 2018API-577 (Welding and Metallurgy) Dammam, KSA, valid up to 2018Certified ASNT Level II as per SNT-TC-1A UT, PT, MT, RT valid up to 2021(LEED Green Building) Certified Leadership in Energy and Environment Design GBCI, Dammam, KSA, valid up to 2017ISO 9001:2008 Quality Management System AwarenessIRCA Certified ISO 9001:2015 Quality Management System Training (Result Awaiting)
Training / CertificationsDefensive Driving Training CourseFall Protection Training CourseCertification of Completion in RFP-007Certificate of Recognition Safe Work at siteTraining of Fall Protection conducted by Saudi AramcoTraining of Confined Space conducted by Saudi AramcoSafety and Technical Online E. Learning
Work ExperienceSince Oct’11 with GIS Bureau VERITAS (Aramco Approved GIS)
NGPIU at Abqaib, KSA RPO-007 with different Project including Community and Oil & gas as HVAC and as Plumbing EngineerSAPIU at Jubail, KSA-Wasit Gas Plant NGL Fractionation Unit PackageInlet and Gas Package as Piping UG/AG and Plumbing EngineerCurrently working at Jizan Economical City Baish in Package as UG and Plumbing Engineer
Roles Handled:QA/QC Engineer, Piping Engineer, Mechanical Engineer, Plumbing Engineer, HVAC Engineer
Key Result Areas:Working at PID (Project Inspection Department) QA/QC at Saudi Aramco Projects, organizing kick of meetings (proposal, engineering & construction phase) and addressing quality requirements for various phases of projectsProviding day-to-day direction for inspection of new facilities in line with engineering & Saudi Aramco standardsConducting inspection of:o Pipe spool internal cleaning (air blowing) prior installationo Pipe laying inspection at pipe rack and sleeper wayo Visual & dimensional inspection on fit-up base, IFC drawing and approving WPS requirements, alignment
and plumpnesso Pipe support installation as per IFC drawingo Valve installationo Witnessed field valve testing (body test, seat test and back seat test)o Bolt torqueing and bolt tensioning activitiesUndertaking:o Pretest punch list as per approved isometric drawing and P&IDo Hydro testing and pneumatic testingPreparing final punch list in line with reference approved latest revised isometric drawing and P&ID drawingsDeveloping punch list items during line checking as per project specifications & standardsChecking quality and recommending solutions through designated channelsAnalyzing piping test packages prior to pneumatic / hydro testing
Assisting sub-contractor QC Inspector in inspections and review of piping & closing of NCRGenerating inspection reports, worksheets, non-compliance reports, log book entries and onsite inspection findingsManaging:o Installation & inspection of lift station for oily water, sanitary water and storm water sewer systemso Calibration of equipment based on the method of statement & vendor's recommendationCreating punch list through MCC walkthrough for plumbing, fire-fighting equipment and components installationImplementing project, coordinating CP installation & commissioning activities for CDS / CHCD systemsUpgrading existing CP system and performing:o Interference test with foreign pipelines at crossing locationso Inspection (RFI) as per the latest approved (ITP)o Bolt tightening activities to produce necessary documentationo Inspection for shaft Alignment (1st, 2nd and Hot Alignment) with minimum allowable Toleranceo Inspection of platforms, handrails, ladders, overhead traveling crane as per approved drawing and
standardsHeading pre-commissioning activities of rotating equipment, procedures reviews for water flushing, chemical cleaning, de-greasing, air blowing, oil flushing, motor solo run, mechanical run and operational testsEvaluating performance curves for machines, equipment base / base plates adequacy, anchor / foundation design load calculations, axial forces versus axial deflections, painting specifications, MDR (Manufacturing Data Reports / Books), spare parts and variety of relevant documentsDealing with technical bids evaluation, detail and field engineering / modifications / response to site technical queries, review of data sheets, IOMs, Fat reports, GAD / cross sectional drawings, P&IDs, analysis data, modification schemes & mechanical sealsSupervising installation & commissioning of:o Reverse osmosis plant (SO SAFE,AQUA FINA)o Electric water heater made by super Asia, Zenith, Haywardo Fire fight pumps (Marsh, Fairbank, and Grandfos)o Multi stage booster pumps for raw water and drinking water systemo Caterpillar gas engine, heavy duty niigata furnace / diesel oil engine, gas turbine (turbo mach)
including waste heat recovery boiler, boiler feed pumps and inline gear pumpo Galvanized iron pipe (light, medium), carbon steel pipe (sch-40 A-53,A 106) PPRC pipe PN-10, PN-
16, PN-20, UPVC pipe, polyethylene pipe SDR-8, SDR-10, SDR-21 and valveso Polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) or copper tubing for use as
residential and commercial buildings water pipeso Swimming pool with equipment and accessories such as chemical dosing pumps, inlets, skimmer,
modular grating, outlets (IML Spain) recirculation pumps and high flow sand filter (Hayward, USA)o Ducting system, HVAC equipment as per ASHRAE and SMACNA such as chiller (York, Carrier, Brad),
AHU, FCU, Fire and Smoke DamperMonitoring hydro testing of CPVC, UPVC, PPRC, PP, RTR, FRP piping in accordance with approved drawing
Approvals:Saudi Aramco Approved Plumbing / Piping Inspection Engineer (SAP #70016391)Saudi Aramco Approved VID inspector QM-69 (SAP # 70019338)
Accomplishments:Managed a team of Quality control (10) for Piping material specification including piping thickness calculation and data sheet of Valve & SM itemsLed 25 projects as Piping Lead entailing man-hour estimation, delivery schedules, input analysis, study piping
Previous ExperienceSep’08-Aug’11 with Izhar construction Pvt. Ltd., Carrefour(Hyperstar)at Lahore and Shahbaz airport Jacobabad as Mechanical & Plumbing (MEP SYSTEMS) Engineer
Mar’02-Aug’08 with Eden Housing Pvt. Ltd., Lahore as HVAC & Public Health Supervisor
Sep’00-Feb’02 with Akbar Associate, Lahore as Plumbing Supervisor
Sep’99-Aug’00 with Eden Developer’s Pvt. Ltd., Lahore as HVAC & Public Health Supervisor
Feb’99-Sep’99 with Akbar Associate, Lahore as Plumbing Supervisor
Jul’97-Feb’99 with Sitara Energy Pvt. Ltd., Faisalabad as Mechanical Maintenance Technician
Jul’96-May’97 with Pakistan Services Ltd., Lahore as Mechanical Plumbing Supervisor
Equipment Purview
Insightful knowledge of:American standards such as ASME, ANSI SMACNA, ASTM, NFPA, NEMA, and OSHA pertaining to infrastructure, Oil and Gas EngineeringInternational standard ASME B31.1, ASME B31.3, ASME B31.4, ASME B31.8, ASME Section-VIII, ASME Section-IX ASME Section-V & API-571UPC, UMC and IPCNSF, FM and ULHydrostatic pressure testing of underground and ground piping systemsWells, video logging for water wells, casing repairs, submersible turbines, submersible pumps and faulty casingsFire sprinkler piping, fuel piping, chill water, hot water piping, AHU, FCU and ductingProject permanent materials like non-shrink Cementous and Epoxy groutLaser, hot, reverse & radial-axial ( face & rim ) shaft alignmentCalibrated dumpy level, theodolite, inside and outside micrometer, dial indicator, precision level, vernier caliper, inclinometer, pyrometer and tachometerFiberglass Reinforced Thermosetting Resin, Pipe system from Bond Strand Ltd., Dammam (Wasit Gas Plant, KSA)
Projects Handled:
Organisation: GIS Bureau VERITAS (Aramco Approved GIS)Client: Saudi Aramco Company
EPC Contractor: CHEC, TR and SEPCO IIISub-Contractor: MAC, BEMCO, RASAL, DESCON, CBI, SINOPECProject: Jizan Economical City Baish Jizan, KSAProject Title: Sea Water System Package #06 Utility and Common Area Package #05 and Power Block Package #04Role: Piping (AG/UG) & Plumbing QA/QC Engineer (PID)Period: Oct’15-Present
EPC Contractor: SK E & CSub-Contractor: SINOPEC / CCC / MMG / L&TProject: WASIT Gas Plant, Al-Jubail, KSAProject Title: NGL Fractionation Package #04 and Inlet & Gas /Train 100 to 400, MEG Area Package #04Role: Piping (AG/UG) & Plumbing QA/QC Engineer (PID), Approved Quality Inspector (SAP #70016391)Period: Oct’11-Sep’15
Client: Eden Developer’s Pvt. Ltd., LahoreRole: HVAC & Public Health SupervisorProjects:
Eden Canal VillasEden Lane-1Eden Lane-2
Client: Pakistan Services Ltd., LahoreRole: Mechanical Plumbing SupervisorProject: Pearl Continental (PC) Hotel Ext.
SeminarsRTR Bondsrand Training Course from Wasit Gas Plant, KSA in Oct’12American Society of Mechanical Engineers-Eastern Saudi Arabia Section, Belgicast Soft Seated Valves by Talis from Le-Meridian Hotel, AL-Khobar, KSA in Mar’13ASME-Eastern Saudi Arabia Section, Problems Affecting Heat Exchanger Performance and Most Efficient Solutions from Carlton Al-Moaibed Hotel, Al-Khobar, KSA in Mar’18
Personal DetailsDate of Birth: 2nd October 1977Passport No.: BZ1117331 / Valid Till: Up to 2026Marital Status: Married / No. of Dependents: 07Driving License: KSAAddress: Chak No.:248/R.B Nai Abadi BISMILLAH Pur Tehsil & District-Faisalabad
Recommended
